coreboot April 2010

coreboot@coreboot.org

64 participants
402 discussions

[PATCH] amdk8_util documentation (and one fix)
by Myles Watson 28 Apr '10

28 Apr '10

This is the real fix. The method returns a 0 instead of a NULL list if there are no resources found. This makes it match the other methods. - Store (BUF0, Local3) + Store (RTAG (BUF0), Local3) The rest of the patch is documentation because I find it hard to understand asl without comments. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Thanks, Myles

1 0

In case this helps my effort: lspci output for ASUS TUSI-M
by Keith Hui 28 Apr '10

28 Apr '10

Superio is IT8705. lspci -tvnn -[0000:00]-+-00.0 Silicon Integrated Systems [SiS] 630 Host [1039:0630] +-00.1 Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] +-01.0 Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018] +-01.1 Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] +-01.2 Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] +-01.3 Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] +-02.0-[01]----00.0 Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter [1039:6300] \-05.0 C-Media Electronics Inc CM8738 [13f6:0111] lspci -vvnnxxx 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 630 Host [1039:0630] (rev 30) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [c0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel driver in use: agpgart-sis Kernel modules: sis-agp 00: 39 10 30 06 07 00 10 22 30 00 00 06 00 20 80 00 10: 00 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 9e 00 c1 00 95 01 81 00 00 55 51 00 00 00 00 00 60: 2a 2a 00 83 00 00 00 00 00 00 e2 00 af 00 00 00 70: 07 9f 00 00 00 00 00 00 00 00 00 00 42 00 00 00 80: 21 ff 7f 1f 60 00 03 40 00 08 00 00 88 67 00 2a 90: 00 00 b1 1f 43 00 00 05 00 00 00 00 00 00 00 00 a0: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 fe 01 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 02 00 20 00 07 02 00 1f 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:80e1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d800 [size=16] Kernel driver in use: pata_sis 00: 39 10 13 55 07 00 00 00 d0 80 01 01 00 80 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 43 10 e1 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 03 00 00 01 b3 00 00 23 07 e6 00 00 02 00 02 50: 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: sis630_smbus Kernel modules: i2c-sis630 00: 39 10 18 00 0f 00 00 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: f0 80 80 0a 05 20 3d 5c 10 00 00 00 11 30 04 01 50: 11 38 02 01 60 00 66 00 9c 04 12 00 d3 8b 38 00 60: 00 80 80 80 20 41 00 00 00 00 09 00 80 80 00 00 70: c0 00 f8 04 00 e4 00 00 00 00 00 00 03 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.1 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 84) Subsystem: ASUSTeK Computer Inc. Device [1043:80e1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at d400 [size=256] Region 1: Memory at eb800000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=160mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sis900 Kernel modules: sis900 00: 39 10 00 09 07 00 90 02 84 00 00 02 00 20 00 00 10: 01 d4 00 00 00 00 80 eb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 34 0b 40: 01 00 c2 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI]) Subsystem: Device [0039:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00: 39 10 01 70 17 00 80 02 07 10 03 0c 08 20 00 00 10: 00 00 00 eb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 00 01 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 50 40: 00 00 00 00 54 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI]) Subsystem: Device [0039:7000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at ea800000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00: 39 10 01 70 17 00 80 02 07 10 03 0c 08 20 00 00 10: 00 00 80 ea 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 00 00 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 50 40: 00 00 00 00 54 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e9800000-e9ffffff Prefetchable memory behind bridge: f0000000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 39 10 01 00 07 00 00 00 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 00 20 20: 80 e9 f0 e9 00 f0 a0 fe 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:80e1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 9800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: C-Media PCI Kernel modules: snd-cmipci 00: f6 13 11 01 85 00 10 02 10 00 01 04 00 20 00 00 10: 01 98 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 01 02 18 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter [1039:6300] (rev 21) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:80e1] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e9800000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a800 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel modules: sisfb 00: 39 10 00 63 03 00 b0 02 21 00 00 03 00 00 00 80 10: 08 00 00 f0 00 00 80 e9 01 a8 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e1 80 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 50 01 06 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 00 20 00 07 02 00 0f 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 flashrom -V (can't find the chip; nor do I find a flash protect option in factory bios settings; it is a SST 39SF020A, soldered) flashrom v0.9.1-r995 on Linux 2.6.33 (i686), built with libpci 3.1.3, GCC 4.3.3 No coreboot table found. DMI string system-manufacturer: "System Manufacturer" DMI string system-product-name: "System Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "TUSI-M" DMI string baseboard-version: "REV 1.xx" DMI string chassis-type: "Tower" Found ITE Super I/O, id 8705 Found chipset "SiS 630", enabling flash write... Found southbridge 1039:0018 at 00:01:0 OK. This chipset supports the following protocols: Non-SPI. SuperI/O ID 8705 is not on the controller list. Calibrating delay loop... 695M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1005 us, 10000 myus = 10015 us, OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xef, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xef, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x20, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x20, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xef, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xef, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x20, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xef, id2 0xdb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xe4, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x98, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically.

1 0

brick avoidance
by Joe Korty 27 Apr '10

27 Apr '10

Hi and good morning, I am new to this coreboot thing. I would like to know what techniques people are using to avoid bricking their motherboard the first time they use coreboot (ie, at the point when a person is completely ignorant about what they are doing). I've looked into the IOSS RD1-LPC8 Bios Savior but haven't been able to get a response from the company. I suspect that the product is no longer available. Too bad, that looked like it was exactly what I needed. My motherboard is the H8DME-2 with an 8 MB LPC flash. Regards, Joe

6 10

[PATCH] RAMTOP fixes
by Myles Watson 27 Apr '10

27 Apr '10

I think we should clean up memory allocation. There are multiple places in the code where RAMTOP is used as an offset into ram and cast to a struct. I think if something is important enough that it needs to be allocated separately from the stack, it should show up in the ldscripts, not just in the code. What's important enough? K8 page tables for APs? EHCI debug? Sysinfo structs? Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Thanks, Myles

3 9

Re: [coreboot] [PATCH] RAMTOP fixes
by Myles Watson 27 Apr '10

27 Apr '10

> is 1M really a prohibitive footprint? I'm just wondering how much we > kill ourselves on this vs. just taking a "large" amount of memory ... > > on a reasonable SMP you're going to have at least 16G I think that's a good argument for keeping it configurable. We're trying to support embedded + laptops + large SMP machines with the same code. Do "reasonable SMP" machines use suspend/resume much? Thanks, Myles

1 0

Re: [coreboot] memset/cache
by Myles Watson 27 Apr '10

27 Apr '10

On Tue, Apr 27, 2010 at 3:59 AM, Stefan Reinauer <stepan(a)coresystems.de> wrote: > > Hi Myles, > > http://patchwork.coreboot.org/patch/1209/ > > Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Rev 5511 Thanks, Myles

1 0

[commit] r5511 - trunk/src/cpu/amd/model_fxx
by repository service 27 Apr '10

27 Apr '10

Author: myles Date: Tue Apr 27 17:00:18 2010 New Revision: 5511 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5511 Log: Enable the cache before initializing the processor name, like model_10 does. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/src/cpu/amd/model_fxx/model_fxx_init.c Modified: trunk/src/cpu/amd/model_fxx/model_fxx_init.c ============================================================================== --- trunk/src/cpu/amd/model_fxx/model_fxx_init.c Tue Apr 27 11:23:33 2010 (r5510) +++ trunk/src/cpu/amd/model_fxx/model_fxx_init.c Tue Apr 27 17:00:18 2010 (r5511) @@ -515,11 +515,11 @@ msr.lo |= (1 << 0); wrmsr(HWCR_MSR, msr); + enable_cache(); + /* Set the processor name string */ init_processor_name(); - enable_cache(); - /* Enable the local cpu apics */ setup_lapic();

1 0

Re: [coreboot] i840 coreboot challenge
by Keith Hui 27 Apr '10

27 Apr '10

>> Hello, >> I want to propose a "coreboot challenge" to first port coreboot to the >> i840 chpset, second port coreboot to support a very rare i840 dual cpu >> board, third instead of RAMBUS (which i840 is designed for) this board >> uses SDRAM. I think this would be a very interesting port for coreboot. >> >> The board is a AMI Megatrends MegaDual. The user manual can be found >> here: http://www.ami.com/support/doc/MegaDual_mb_man.PDF >> >> I have four of these rare boards and am willing to donate three of them >> (one person each, less shipping costs of course) to anyone who is >> willing to take on this challenge. Let me know if your interested. >> Sounds like some sort of reference board for workstations/servers. i840+SDRAM means this board has one or two MTHs. This is going to be epic. (No I won't be able to attempt it - I still have 440BX and SIS630ET in my pipeline.) Regards Keith

2 1

Re: [coreboot] Patch for enableing 440BX NB to use large memory modules
by Anders Jenbo 27 Apr '10

27 Apr '10

> > Single sided 512MB (what I used to test), becomes a 128MB. > > A asymmetric 384MB double sided modules, with 256MB on one side > and > > 128MB on the other. Becomes two sides with 128MB (a 256MB module). > > This is also enabled in at least some BIOSs (GA-BXC). > > > > The patch also cleans up some whitespace. > > > > Signed-off-by: Anders Jenbo > > > I like this... no hardware to test though... > Acked-by: Stefan Reinauer Thanks I dug threw the datacheet: http://download.intel.com/design/chipsets/datashts/29063301.pdf On page 3-31 (PDF page 57) the first box is the only real hint at this. on page 4-4 under 4.1.1.2 (PDF page 90 there is a reference to 4GB of memory), on the next page there is a reference to 4GB being the maximum physically supported amount of memory. So my conclusion is that you can install a maximum of 4GB but only 128MB per DIMM side will be addressable/possible to initialized. I have another 440BX based board with 4 DIMMs (GA-6BXC has 3 DIMMs), once I have ported CoreBoot for it, I will gladly preform more real world tests. I also found some more SDRAM to test with (one of them is 512MB I belive), It's also posible that i can borrow more Ram for testing from work. Stefan, since you acked the patch, should I still correct the typos that Paul pointed out and split it in to a patch, one with the added memory support and one with the cleaned white space? Glad to be a contributing part to CoreBoot :) -Anders ---- Msg sent via @Mail - http://atmail.com/

4 6

build service results for r5510
by coreboot information 27 Apr '10

27 Apr '10

Dear coreboot readers! This is the automatic build system of coreboot. The developer "oxygene" checked in revision 5510 to the coreboot repository. This caused the following changes: Change Log: More "prepare"-dependencies we don't need anymore Signed-off-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Acked-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Build Log: Configuration of a-trend:atc-6220 has been fixed Configuration of a-trend:atc-6240 has been fixed Configuration of abit:be6-ii_v2_0 has been fixed Configuration of advantech:pcm-5820 has been fixed Configuration of amd:db800 has been fixed Configuration of amd:dbm690t has been fixed Configuration of amd:mahogany has been fixed Configuration of amd:mahogany_fam10 has been fixed Configuration of amd:norwich has been fixed Configuration of amd:pistachio has been fixed Configuration of amd:rumba has been fixed Configuration of amd:serengeti_cheetah has been fixed Configuration of amd:serengeti_cheetah_fam10 has been fixed Configuration of amd:tilapia_fam10 has been fixed Configuration of arima:hdama has been fixed Configuration of artecgroup:dbe61 has been fixed Configuration of asi:mb_5blgp has been fixed Configuration of asi:mb_5blmp has been fixed Configuration of asrock:939a785gmh has been fixed Configuration of asus:a8n_e has been fixed Configuration of asus:a8v-e_se has been fixed Configuration of asus:m2v-mx_se has been fixed Configuration of asus:mew-am has been fixed Configuration of asus:mew-vm has been fixed Configuration of asus:p2b has been fixed Configuration of asus:p2b-d has been fixed Configuration of asus:p2b-ds has been fixed Configuration of asus:p2b-f has been fixed Configuration of asus:p2b-ls has been fixed Configuration of asus:p3b-f has been fixed Configuration of axus:tc320 has been fixed Configuration of azza:pt-6ibd has been fixed Configuration of bcom:winnet100 has been fixed Configuration of bcom:winnetp680 has been fixed Configuration of biostar:m6tba has been fixed Configuration of broadcom:blast has been fixed Configuration of compaq:deskpro_en_sff_p600 has been fixed Configuration of dell:s1850 has been fixed Configuration of digitallogic:adl855pc has been fixed Configuration of digitallogic:msm586seg has been fixed Configuration of digitallogic:msm800sev has been fixed Configuration of eaglelion:5bcm has been fixed Configuration of emulation:qemu-x86 has been fixed Configuration of gigabyte:ga-6bxc has been fixed Configuration of gigabyte:ga_2761gxdk has been fixed Configuration of gigabyte:m57sli has been fixed Configuration of hp:dl145_g3 has been fixed Configuration of hp:e_vectra_p2706t has been fixed Configuration of ibm:e325 has been fixed Configuration of ibm:e326 has been fixed Configuration of iei:juki-511p has been fixed Configuration of iei:nova4899r has been fixed Configuration of iei:pcisa-lx-800-r10 has been fixed Configuration of intel:d945gclf has been fixed Configuration of intel:eagleheights has been fixed Configuration of intel:jarrell has been fixed Configuration of intel:mtarvon has been fixed Configuration of intel:truxton has been fixed Configuration of intel:xe7501devkit has been fixed Configuration of iwill:dk8_htx has been fixed Configuration of iwill:dk8s2 has been fixed Configuration of iwill:dk8x has been fixed Configuration of jetway:j7f24 has been fixed Configuration of kontron:986lcd-m has been fixed Configuration of kontron:kt690 has been fixed Configuration of lippert:frontrunner has been fixed Configuration of lippert:roadrunner-lx has been fixed Configuration of lippert:spacerunner-lx has been fixed Configuration of mitac:6513wu has been fixed Configuration of msi:ms6119 has been fixed Configuration of msi:ms6147 has been fixed Configuration of msi:ms6156 has been fixed Configuration of msi:ms6178 has been fixed Configuration of msi:ms7135 has been fixed Configuration of msi:ms7260 has been fixed Configuration of msi:ms9185 has been fixed Configuration of msi:ms9282 has been fixed Configuration of msi:ms9652_fam10 has been fixed Configuration of nec:powermate2000 has been fixed Configuration of newisys:khepri has been fixed Configuration of nokia:ip530 has been fixed Configuration of nvidia:l1_2pvv has been fixed Configuration of olpc:btest has been fixed Configuration of olpc:rev_a has been fixed Configuration of pcengines:alix1c has been fixed Configuration of rca:rm4100 has been fixed Configuration of roda:rk886ex has been fixed Configuration of soyo:sy-6ba-plus-iii has been fixed Configuration of sunw:ultra40 has been fixed Configuration of supermicro:h8dme has been fixed Configuration of supermicro:h8dmr has been fixed Configuration of supermicro:h8dmr_fam10 has been fixed Configuration of supermicro:h8qme_fam10 has been fixed Configuration of supermicro:x6dai_g has been fixed Configuration of supermicro:x6dhe_g has been fixed Configuration of supermicro:x6dhe_g2 has been fixed Configuration of supermicro:x6dhr_ig has been fixed Configuration of supermicro:x6dhr_ig2 has been fixed Configuration of technexion:tim5690 has been fixed Configuration of technexion:tim8690 has been fixed Configuration of technologic:ts5300 has been fixed Configuration of televideo:tc7020 has been fixed Configuration of thomson:ip1000 has been fixed Configuration of tyan:s1846 has been fixed Configuration of tyan:s2735 has been fixed Configuration of tyan:s2850 has been fixed Configuration of tyan:s2875 has been fixed Configuration of tyan:s2880 has been fixed Configuration of tyan:s2881 has been fixed Configuration of tyan:s2882 has been fixed Configuration of tyan:s2885 has been fixed Configuration of tyan:s2891 has been fixed Configuration of tyan:s2892 has been fixed Configuration of tyan:s2895 has been fixed Configuration of tyan:s2912 has been fixed Configuration of tyan:s2912_fam10 has been fixed Configuration of tyan:s4880 has been fixed Configuration of tyan:s4882 has been fixed Configuration of via:epia has been fixed Configuration of via:epia-cn has been fixed Configuration of via:epia-m has been fixed Configuration of via:epia-m700 has been fixed Configuration of via:epia-n has been fixed Configuration of via:pc2500e has been fixed Configuration of via:vt8454c has been fixed Configuration of winent:pl6064 has been fixed If something broke during this checkin please be a pain in oxygene's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot April 2010