#95: Run coreboot in VirtualBox
by coreboot
#95: Run coreboot in VirtualBox
---------------------------------+------------------------------------------
Reporter: uwe | Owner: somebody
Type: defect | Status: new
Priority: minor | Milestone:
Component: misc | Version:
Keywords: | Dependencies:
Patchstatus: there is no patch |
---------------------------------+------------------------------------------
It would be nice if we could test coreboot images in VirtualBox, see
http://virtualbox.org/.
VirtualBox does not (yet) provide a simple mechanism to use a different
BIOS in their emulated machines (something like "-L" in qemu). Instead the
BIOS image (a custom bochs BIOS + LGPL'g VGABIOS) is converted to C code
(an array of bytes, or the like) and merged into the VirtualBox
executable.
The relevant files are
{{{
src/VBox/Devices/PC/DevPcBios.cpp
bldprogs/bin2c.c
}}}
if someone want to hack VirtualBox to easily support using coreboot images
instead of their usual BIOS.
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/95>
coreboot <http://www.coreboot.org/>
4 years, 8 months
EHCI debug port finder
by Carl-Daniel Hailfinger
I wanted to know which physical port of my multiple USB controllers have
the debug capability. There was no way to find that easily, so I created
a tool which will do most of the work for the user.
Example output:
The following PCI devices support a USB debug port (says lspci):
0000:00:1d.7
The following PCI devices support a USB debug port (says the kernel):
0000:00:1d.7
PCI device 0000:00:1d.7, USB bus 3, USB physical port 1
Currently connected high-speed devices:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 2: Dev 20, If 0, Class=stor., Driver=usb-storage, 480M
The output can be improved, but it's a good start.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
5 years, 2 months
#131: New flashrom motherboard support
by coreboot
#131: New flashrom motherboard support
---------------------------------+------------------------------------------
Reporter: anonymous | Owner: somebody
Type: enhancement | Status: new
Priority: trivial | Milestone: Going mainstream
Component: flashrom | Version: v2
Keywords: flashrom asus | Dependencies:
Patchstatus: there is no patch |
---------------------------------+------------------------------------------
Did not know where I should put this but the bugtracker seemed like the
right place.
I tried flashrom and it could not detect my chip on my ASUS P5ND2-SLI
Deluxe motherboard. The board has a SST49LF004B flash chip and after
enforcing the right chip flashrom seems to work fine.
{{{
# ./flashrom -V -f -r -c SST49LF004A/B test
Calibrating delay loop... 796M loops per second, 100 myus = 201 us. OK.
No coreboot table found.
WARNING: No chipset found. Flash detection will most likely fail.
Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x21, id2 0x5e,
id1 parity violation
No EEPROM/flash device found.
Force read (-f -r -c) requested, forcing chip probe success:
Probing for SST SST49LF004A/B, 512 KB: Found chip "SST SST49LF004A/B" (512
KB) at physical address 0xfff80000.
Force reading flash... done.
}}}
This should probably apply to the P5ND-SLI board, too.
What do you need from me for adding autodetection of this board/chip?
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/131>
coreboot <http://www.coreboot.org/>
6 years, 11 months
Re: [coreboot] how to delete symbol link created at compile time
by She, Kerry
> -----Original Message-----
> From: Marc Jones [mailto:marcj303@gmail.com]
> Sent: Tuesday, October 18, 2011 10:39 AM
> To: Stefan Reinauer
> Cc: She, Kerry; coreboot
> Subject: Re: [coreboot] how to delete symbol link created at compile time
>
> On Mon, Oct 17, 2011 at 4:44 PM, Stefan Reinauer
> <stefan.reinauer(a)coreboot.org> wrote:
> > * Marc Jones <marcj303(a)gmail.com> [111016 10:10]:
> >> >> > I have created 2 devicetree file :
> >> >> >
> >> >> > devicetree_f15.cb for platform with family 15 CPU
> >> >> >
> >> >> > devicetree_f10.cb for platform with family 10 CPU
> >> >> >
> >> >> >
> >> >> >
> >> >> > I changed the makefile to create a symbol link "devicetree.cb"
> link to
> >> >> > devicetree_f10.cb or devicetree_f15.cb at compile time.
> >> >> >
> >> >> > The problem is that I can't delete the symbol link when make
> >> >> > clean/distclean.
> >> >
> >> > Please fix the problem by using one device tree for both platforms.
> >
> >> Stefan,
> >>
> >> Can you explain your thoughts on how that would work? Can we put a #if
> >> in the devicetree.cb? It uses the c precompiler? It requires different
> >> CPU files/device locations. We can try it next week.
> >
> > Usually the way this is handled in coreboot is that there is one socket
> > that binds together all CPU types. Then in the device tree only the
> > socket type is specified, and code for both CPUs is pulled in.
> > Maybe we need something like a socket for northbridge code, since the
> > northbridge now lives in the CPU?
> >
> > It seems like a bad idea to have to recompile your BIOS because you
> > change the CPU. We did a lot of nastyness with K8 and Fam10, but we
> > should find a better way to do this for future chipsets/CPUs.
>
>
> Yes, we are discussing how the AGESA code would work. The socket
> decision is rather complicated as we need a way to handle multiple
> calls with the same names (function point tables etc). I think that
> there may be a solution within AGESA, but the device tree may still be
> a problem as the CPUs have different HT link numbering. This makes it
> hard to have the same device tree layout for the same socket.
Because of the function name conflict, put cpu code of 2 families together would not compile.
We need to dig into AGESA more to figure out a solution.
As for the devicetree problem, following text is the devicetree difference in detail:
--- devicetree_fam10.cb 2011-08-15 15:00:14.426692437 +0800
+++ devicetree_fam15.cb 2011-08-15 15:00:14.426692437 +0800
@@ -16,19 +16,17 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-chip northbridge/amd/agesa/family10/root_complex
+chip northbridge/amd/agesa/family15/root_complex
device lapic_cluster 0 on
- chip cpu/amd/agesa/family10
- device lapic 0x10 on end
+ chip cpu/amd/agesa/family15
+ device lapic 0x20 on end
end
end
device pci_domain 0 on
subsystemid 0x15d9 0xab11 inherit #SuperMicro
- chip northbridge/amd/agesa/family10 # CPU side of HT root complex
- device pci 18.0 on end # link 0
- device pci 18.0 on end # link 1
- device pci 18.0 on end # link 2
- device pci 18.0 on # link 3, SB on socket0 link 2, on internal Node0 Link 3
+ chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+ device pci 18.0 on end # Link 0
+ device pci 18.0 on # Link 1, IO-HUB on socket0 link 2(internal Node0 Link 1)
chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex
device pci 0.0 on end # HT Root Complex 0x9600
7 years, 1 month
#135: Flashrom deletes MAC addresses on Tyan Tomcat n3400B (S2925-E)
by coreboot
#135: Flashrom deletes MAC addresses on Tyan Tomcat n3400B (S2925-E)
---------------------------------+------------------------------------------
Reporter: Jan@… | Owner: somebody
Type: defect | Status: new
Priority: major | Milestone:
Component: flashrom | Version: v2
Keywords: | Dependencies:
Patchstatus: there is no patch |
---------------------------------+------------------------------------------
I've tried updating the BIOS of a Tomcat n3400B (S2925-E). The update
itself worked fine, but the MAC addresses of the onboard NVidia-Gigabit
Ethernet chips were set to bogus values (66:55:44:33:22:11 or something
like that) afterwards. Restoring the old flash backup worked. This does
not happen with the official update tool from Tyan.
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/135>
coreboot <http://www.coreboot.org/>
7 years, 5 months
Set top box update
by Gregg Levine
Hello!
Amazon tells me that there are now two people selling their Akimbo
boxes. Perhaps I'll definitely buy one.
And Joe here is the linked page which contains a reference to the STB
kit from Intel:
http://cerberus.teamhackaday.com/?p=3
It turns out that it comes up right below the description for the
device. It seems the only thing nonstandard about it is the crappy
BIOS that Akimbo insisted on.
-----
Gregg C Levine gregg.drwho8(a)gmail.com
"This signature fought the Time Wars, time and again."
7 years, 5 months
flaschip (and compatibles)
by Oliver Schinagl
Hey list,
I want (in the far? future) play with coreboot on my new board, an Asus
M5A97 (900 series amd chipset) thing. Having it not even build into my
case yet, I was wondering if you guys know what a compatible flash chip
is. I have an 8 legged little socketable chip on here, with the
following markings:
MXIC
b111376-12G
MX25L3206EPI
3F204500
So far I found the best results from google with the MX25L3206EPI
labeling but the few links I got where mostly in chinese and the
datasheet links where the 'pay' kind.
Any pointers what I can ask for when I go to my local hardware store so
I can order 3 or 4? Shouldn't be too expensive right? Anything in
NL/BE/DE I suppose would work best :)
7 years, 6 months
Re: [coreboot] [SeaBIOS] usb boot issue
by Kevin O'Connor
On Thu, Oct 13, 2011 at 03:56:48PM +0200, Wolfgang Kamp - datakamp wrote:
>
> Hi,
>
> is there any solution for the usb boot issue of the AMD SB800 Persimmon platform
> with SeaBIOS 1.6.3 and actual Coreboot version?
I'm unfamiliar with the issue. Can you post the SeaBIOS debug output
along with a description of the issue you are seeing?
-Kevin
7 years, 8 months
