coreboot July 2010

coreboot@coreboot.org

57 participants
142 discussions

Re: [coreboot] LinuxBios P6IWP-Fe
by Anders Jenbo 23 Jul '10

23 Jul '10

The bios is only 256KB, but it is written as bit (8 bits per byte). Not being tied to Linux is actually a good thing as it gives more flexibility an we still have the possibility to have all the benefits of having Linux in there. I'm not sure what you are saying in the last part of you email, but if you plan to port more boards to coreboot that's grate :) What is your native language? If you could include both the original and translated text I might be better able to understand you. Mvh Anders Den 23/07/2010 kl. 15.02 skrev Alan Grossi <alan_roberto_grossi(a)hotmail.com>: > Good Day Friend. Yes I will try and send the results. > > Too bad the Coreboot is no longer tied to Linux, but I want to study in depth and yes he still have bios. > > Was looking in my bios I found some scraps that I believe to work in ECS_P6IWP-Fe, bios 2MB. > > I really appreciate it if you send me a picture compiled. I'm still studying how to build the mine, but I do not see that long, I just risking. > > Thanks for everything. Sorry for any inconvenience. I have a vast collection of motherboards at home, or els with the test and then you step Coreboot results. So we can add even more to the list of cards supported. > > I'm not very good with English, so I'm using Google translator. Sorry the inconsistencies in the text. > > _______________________________________________________________________________________________________________________________________ > > > Subject: Re: LinuxBios P6IWP-Fe > > From: anders(a)jenbo.dk > > To: alan_roberto_grossi(a)hotmail.com > > Date: Fri, 23 Jul 2010 00:45:33 +0200 > > > > Hi i ported this board 45 dayes ago :) > > Here is the current status of the board > > http://www.coreboot.org/ECS_P6IWP-Fe > > If you test any thing make sure to send your result here so that we can > > update the table. > > > > LinuxBIOS is now know as Coreboot, this is because it is nolonger tied > > in to Linux (you still can do that if you want to). > > > > The rom flash chip on the board is fairly small, so putting a full linux > > on it might not be posible. But you can still run coreboot, with either > > FILO, GRUB or SeaBIOS as a payload and have one of them start up your > > installed linux. > > > > I can send you a compiled image tomorrow, if you like. > > > > To compile one your self: > > > > 1: make sure that you have all the tools mentioned here: > > http://www.coreboot.org/Development_Guidelines#Required_Toolchain > > (you can stop when you get to "Coding Guidelines") > > > > 2: follow this guide. > > http://www.coreboot.org/Build_HOWTO > > pick SeaBIOS as your payload, it's a safe bet for starters. > > > > Before you flash your motherboard you should consider getting a second > > flashrom-chip that you can safely flash, this way if things doesn't work > > you can get your motherboard back to life by placing back the original > > flashrom-chip. > > The chip you will need is an Intel 82802AB, it can be found on some > > other mother boards, i don't know if it is still possible to order it. > > It will look some thing like this: > > http://flashrom.org/File:Plcc32_in_socket.jpg > > > > -Anders > > > > tor, 22 07 2010 kl. 16:27 +0300, skrev Alan Grossi: > > > Good Day Friend. > > > > > > My name is ALAN GROSSI, I'm a fan of Linux. > > > > > > I have the Motherboard P6IWP-Fe and now I'm getting to know the Linux > > > BIOS project. > > > > > > I would like your help to configure and use this motherboard. > > > > > > Perhaps a bios ready. > > > > > > Sorry for the inconvenience. > > > > > > Thanks already. > > > > > > > > > > > > > > > > > > ______________________________________________________________________ > > > O INTERNET EXPLORER 8 AJUDA VOCÊ A FICAR LONGE DOS VÍRUS. DESCUBRA > > > COMO. > > > > > > LEVE SEU MESSENGER PARA ONDE VOCÊ ESTIVER PELO SEU CELULAR. CLIQUE E VEJA COMO FAZER.

1 0

#134: flashrom crashes acer aspire one laptop
by coreboot 23 Jul '10

23 Jul '10

#134: flashrom crashes acer aspire one laptop -----------------------------------------------------------+---------------- Reporter: Timo Juhani Lindfors <timo.lindfors@…> | Owner: somebody Type: defect | Status: new Priority: minor | Milestone: Component: flashrom | Version: v2 Keywords: aspire laptop | Dependencies: Patchstatus: there is no patch | -----------------------------------------------------------+---------------- I ran the "flashrom" command on my acer aspire one laptop. The display turned black and the system did not respond to even sysrq after that. (Fortunately the system boots after powercycling.) This is debian stable with flashrom package that has version "0.0+r3397-1". -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/134> coreboot <http://www.coreboot.org/>

1 8

why "No irq handler for vector (irq -1)"
by Bao, Zheng 23 Jul '10

23 Jul '10

I am porting coreboot to a new board. The processor is family 10 C32. The chipset is close to rs780. It seems to be quite close to ok. But the linux reports "No irq handler for vector (irq -1)". I am wondering whether IOAPIC or LAPIC will cause that problem. Or any other suggestion? Zheng ----------------------- Booting 'hda1:/boot/2.6.34-sb800 ro root=UUID=7f2a5ca6-6e6d-4fcd-a6cf-80c595592 6d3 console=ttyS0,115200 pci=nomsi initrd=hda1:/boot/initrd-2.6.34-sb800-bao' Found Linux version 2.6.34-sb800-bao (baozheng(a)localhost.localdomain) #8 SMP Fr i Jun 18 18:06:37 CST 2010 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-sb800-bao (baozheng(a)localhost.localdomain) (gcc version 4.3 .2 20081007 (Red Hat 4.3.2-6) (GCC) ) #8 SMP Fri Jun 18 18:06:37 CST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 type 16 [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000c0000 - 0000000030000000 (usable) [ 0.000000] BIOS-e820: 0000000030000000 - 0000000040000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f0400] f0400 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] RAMDISK: 2fb50000 - 2fe9c000 [ 0.000000] ACPI Error: A valid RSDP was not found (20100121/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 768MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 30000000 [ 0.000000] low ram: 0 - 30000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00030000 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: COREBOOT [ 0.000000] MPTABLE: Product ID: PENSE [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] Processor #4 [ 0.000000] Processor #5 [ 0.000000] Processor #8 [ 0.000000] Processor #9 [ 0.000000] Processor #10 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0xa ignored. [ 0.000000] Processor #11 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0xb ignored. [ 0.000000] Processor #12 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0xc ignored. [ 0.000000] Processor #13 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xd ignored. [ 0.000000] I/O APIC #33 Version 17 at 0xF0000000. [ 0.000000] Processors: 8 [ 0.000000] 12 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s32724 r0 d20524 u524288 [ 0.000000] pcpu-alloc: s32724 r0 d20524 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194975 [ 0.000000] Kernel command line: ro root=UUID=7f2a5ca6-6e6d-4fcd-a6cf-80c5955926d3 console=t tyS0,115200 pci=nomsi [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (42 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0001000000 - 00016253d0] TEXT DATA BSS [ 0.000000] #3 [002fb50000 - 002fe9c000] RAMDISK [ 0.000000] #4 [0001626000 - 000162c000] BRK [ 0.000000] #5 [000009f000 - 00000f0400] BIOS reserved [ 0.000000] #6 [00000f0400 - 00000f0410] MP-table mpf [ 0.000000] #7 [00000f0664 - 0000100000] BIOS reserved [ 0.000000] #8 [00000f0410 - 00000f0664] MP-table mpc [ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE [ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP [ 0.000000] #11 [000162c000 - 000162d000] BOOTMEM [ 0.000000] #12 [000162d000 - 0001c2d000] BOOTMEM [ 0.000000] #13 [0001625400 - 0001625404] BOOTMEM [ 0.000000] #14 [0001625440 - 0001625500] BOOTMEM [ 0.000000] #15 [0001625500 - 0001625548] BOOTMEM [ 0.000000] #16 [0001c2d000 - 0001c30000] BOOTMEM [ 0.000000] #17 [0001625580 - 00016255a7] BOOTMEM [ 0.000000] #18 [00016255c0 - 0001625630] BOOTMEM [ 0.000000] #19 [0001625640 - 0001625680] BOOTMEM [ 0.000000] #20 [0001625680 - 00016256c0] BOOTMEM [ 0.000000] #21 [00016256c0 - 0001625700] BOOTMEM [ 0.000000] #22 [0001625700 - 0001625740] BOOTMEM [ 0.000000] #23 [0001625740 - 0001625791] BOOTMEM [ 0.000000] #24 [00016257c0 - 0001625811] BOOTMEM [ 0.000000] #25 [0002000000 - 000200d000] BOOTMEM [ 0.000000] #26 [0002080000 - 000208d000] BOOTMEM [ 0.000000] #27 [0002100000 - 000210d000] BOOTMEM [ 0.000000] #28 [0002180000 - 000218d000] BOOTMEM [ 0.000000] #29 [0002200000 - 000220d000] BOOTMEM [ 0.000000] #30 [0002280000 - 000228d000] BOOTMEM [ 0.000000] #31 [0002300000 - 000230d000] BOOTMEM [ 0.000000] #32 [0002380000 - 000238d000] BOOTMEM [ 0.000000] #33 [0001625840 - 0001625844] BOOTMEM [ 0.000000] #34 [0001625880 - 0001625884] BOOTMEM [ 0.000000] #35 [00016258c0 - 00016258e0] BOOTMEM [ 0.000000] #36 [0001625900 - 0001625920] BOOTMEM [ 0.000000] #37 [0001625940 - 00016259d8] BOOTMEM [ 0.000000] #38 [0001625a00 - 0001625a38] BOOTMEM [ 0.000000] #39 [0001c30000 - 0001c34000] BOOTMEM [ 0.000000] #40 [0001c34000 - 0001cb4000] BOOTMEM [ 0.000000] #41 [0001cb4000 - 0001cf4000] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 768960k/786432k available (3339k kernel code, 17084k reserved, 1887k dat a, 372k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] .init : 0xc151b000 - 0xc1578000 ( 372 kB) [ 0.000000] .data : 0xc1342d7a - 0xc151abe8 (1887 kB) [ 0.000000] .text : 0xc1000000 - 0xc1342d7a (3339 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2200.073 MHz processor. [ 0.003014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400. 14 BogoMIPS (lpj=2200073) [ 0.005050] Security Framework initialized [ 0.006050] Mount-cache hash table entries: 512 [ 0.007365] Initializing cgroup subsys ns [ 0.008010] Initializing cgroup subsys cpuacct [ 0.010014] Initializing cgroup subsys freezer [ 0.011043] CPU: Physical Processor ID: 0 [ 0.012006] CPU: Processor Core ID: 0 [ 0.013012] mce: CPU supports 6 MCE banks [ 0.014033] using C1E aware idle routine [ 0.015022] Performance Events: AMD PMU driver. [ 0.017016] ... version: 0 [ 0.018006] ... bit width: 48 [ 0.019004] ... generic registers: 4 [ 0.020004] ... value mask: 0000ffffffffffff [ 0.021004] ... max period: 00007fffffffffff [ 0.022004] ... fixed-purpose events: 0 [ 0.023004] ... event mask: 000000000000000f [ 0.024022] Checking 'hlt' instruction... OK. [ 0.030588] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032338] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 [ 0.032999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.032999] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.032999] ..... (found apic 0 pin 0) ... [ 0.043281] ....... works. [ 0.044004] CPU0: AMD Thermal Test Kit stepping 01 [ 0.149446] Booting Node 0, Processors #1 [ 0.003999] Initializing CPU#1 [ 0.003999] do_IRQ: 1.55 No irq handler for vector (irq -1) [ 0.223153] #2 [ 0.003999] Initializing CPU#2 [ 0.003999] do_IRQ: 2.55 No irq handler for vector (irq -1) [ 0.297156] #3 [ 0.003999] Initializing CPU#3 [ 0.003999] do_IRQ: 3.55 No irq handler for vector (irq -1) [ 0.371154] #4 [ 0.003999] Initializing CPU#4 [ 0.003999] do_IRQ: 4.55 No irq handler for vector (irq -1) [ 0.445158] #5 [ 0.003999] Initializing CPU#5 [ 0.003999] do_IRQ: 5.55 No irq handler for vector (irq -1) [ 0.519159] #6 [ 0.003999] Initializing CPU#6 [ 0.003999] do_IRQ: 6.55 No irq handler for vector (irq -1) [ 0.593166] #7 Ok. [ 0.003999] Initializing CPU#7 [ 0.003999] do_IRQ: 7.55 No irq handler for vector (irq -1) [ 0.667034] Brought up 8 CPUs [ 0.668010] Total of 8 processors activated (35200.21 BogoMIPS). [ 0.671260] khelper used greatest stack depth: 7176 bytes left [ 0.673208] NET: Registered protocol family 16 [ 0.683087] TOM: 0000000040000000 aka 1024M [ 0.684028] TOM2: 0000000000000000 aka 0M [ 0.686364] PCI: Using configuration type 1 for base access [ 0.687003] PCI: Using configuration type 1 for extended access [ 0.721065] bio: create slab <bio-0> at 0 [ 0.723094] ACPI: Interpreter disabled. [ 0.724095] vgaarb: loaded [ 0.726079] SCSI subsystem initialized [ 0.729037] usbcore: registered new interface driver usbfs [ 0.730078] usbcore: registered new interface driver hub [ 0.731081] usbcore: registered new device driver usb [ 0.734047] Advanced Linux Sound Architecture Driver Version 1.0.22.1. [ 0.735008] PCI: Probing PCI hardware [ 0.738214] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) [ 0.742085] vgaarb: device added: PCI:0000:01:06.0,decodes=io+mem,owns=io+mem,locks=none [ 0.744095] PCI: Discovered primary peer bus 10 [IRQ] [ 0.746157] cfg80211: Calling CRDA to update world regulatory domain [ 0.747085] NetLabel: Initializing [ 0.748005] NetLabel: domain hash size = 128 [ 0.749002] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.750032] NetLabel: unlabeled traffic allowed by default [ 0.752077] Switching to clocksource tsc [ 0.758546] pnp: PnP ACPI: disabled [ 0.765008] pci 0000:00:14.1: BAR 4: assigned [io 0x2030-0x203f] [ 0.771119] pci 0000:00:14.1: BAR 4: set to [io 0x2030-0x203f] (PCI address [0x2030-0x203f] [ 0.779554] pci 0000:00:14.4: PCI bridge to [bus 01-01] [ 0.784785] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.790891] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xe00fffff] [ 0.797682] pci 0000:00:14.4: bridge window [mem 0xe8000000-0xefffffff pref] [ 0.805118] NET: Registered protocol family 2 [ 0.809681] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.817548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.827236] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.834995] TCP: Hash tables configured (established 131072 bind 65536) [ 0.841609] TCP reno registered [ 0.844765] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.850721] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.857377] NET: Registered protocol family 1 [ 0.862028] Trying to unpack rootfs image as initramfs... [ 1.131241] Freeing initrd memory: 3376k freed [ 1.142297] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.204111] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.222322] VFS: Disk quotas dquot_6.5.2 [ 1.226556] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.235737] msgmni has been set to 1508 [ 1.240845] cryptomgr_test used greatest stack depth: 7168 bytes left [ 1.242144] alg: No test for stdrng (krng) [ 1.251400] cryptomgr_test used greatest stack depth: 6888 bytes left [ 1.251816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.251826] io scheduler noop registered [ 1.251830] io scheduler deadline registered [ 1.252119] io scheduler cfq registered (default) [ 1.252901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.284116] ------------[ cut here ]------------ [ 1.288761] WARNING: at fs/proc/generic.c:825 remove_proc_entry+0xa5/0x1a7() [ 1.295811] name 'fan' [ 1.298183] Modules linked in: [ 1.301277] Pid: 1, comm: swapper Not tainted 2.6.34-sb800-bao #8 [ 1.307374] Call Trace: [ 1.309846] [<c10d90ba>] ? remove_proc_entry+0xa5/0x1a7 [ 1.315170] [<c102c926>] warn_slowpath_common+0x60/0x90 [ 1.320490] [<c102c98a>] warn_slowpath_fmt+0x24/0x27 [ 1.325551] [<c10d90ba>] remove_proc_entry+0xa5/0x1a7 [ 1.330703] [<c1537208>] ? acpi_button_init+0x0/0x4a [ 1.335763] [<c10d99df>] ? proc_mkdir_mode+0x2f/0x43 [ 1.340823] [<c1537252>] ? acpi_fan_init+0x0/0x2c [ 1.345621] [<c1537275>] acpi_fan_init+0x23/0x2c [ 1.350330] [<c1001139>] do_one_initcall+0x4c/0x131 [ 1.355306] [<c151b36a>] kernel_init+0x127/0x1a8 [ 1.360017] [<c151b243>] ? kernel_init+0x0/0x1a8 [ 1.364729] [<c1002d36>] kernel_thread_helper+0x6/0x10 [ 1.369982] ---[ end trace a7919e7f17c0a725 ]--- [ 1.390836] Linux agpgart interface v0.103 [ 1.395749] [drm] Initialized drm 1.1.0 20060810 [ 1.400376] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 1.407861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ÿÿ[ 1.658895] do_IRQ: 1.55 No irq handler for vector (irq -1) [ 1.658906] do_IRQ: 2.55 No irq handler for vector (irq -1) [ 1.658918] do_IRQ: 7.55 No irq handler for vector (irq -1) [ 1.659095] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.691713] brd: module loaded [ 1.699045] loop: module loaded [ 1.702199] Uniform Multi-Platform E-IDE driver [ 1.707240] ide-gd driver 1.18 [ 1.711848] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 1.718909] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.726913] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.736741] scsi0 : ahci [ 1.739967] scsi1 : ahci [ 1.743131] scsi2 : ahci [ 1.746230] scsi3 : ahci [ 1.749227] ata1: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100100 irq 22 [ 1.756626] ata2: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100180 irq 22 [ 1.764023] ata3: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100200 irq 22 [ 1.771417] ata4: SATA max UDMA/133 abar m1024@0xe0100000 port 0xe0100280 irq 22 [ 1.781034] Fixed MDIO Bus: probed [ 1.784481] console [netcon0] enabled [ 1.788150] netconsole: network logging started [ 1.793749] PNP: No PS/2 controller found. Probing ports directly. [ 2.052190] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.057650] mice: PS/2 mouse device common for all mice [ 2.063953] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 2.070358] rtc0: alarms up to one day, 114 bytes nvram [ 2.076948] cpuidle: using governor ladder [ 2.081052] cpuidle: using governor menu [ 2.083879] ata2: SATA link down (SStatus 0 SControl 300) [ 2.083970] ata3: SATA link down (SStatus 0 SControl 300) [ 2.084112] ata4: SATA link down (SStatus 0 SControl 300) [ 2.107588] usbcore: registered new interface driver hiddev [ 2.113369] usbcore: registered new interface driver usbhid [ 2.118947] usbhid: USB HID core driver [ 2.126816] ALSA device list: [ 2.129795] No soundcards found. [ 2.133248] Netfilter messages via NETLINK v0.30. [ 2.138020] nf_conntrack version 0.5.0 (12067 buckets, 48268 max) [ 2.145034] ctnetlink v0.93: registering with nfnetlink. [ 2.151573] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.157034] TCP cubic registered [ 2.160277] NET: Registered protocol family 17 [ 2.164754] Using IPI No-Shortcut mode [ 2.236807] ata1: softreset failed (device not ready) [ 2.241870] ata1: applying SB600 PMP SRST workaround and retrying [ 2.400799] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.406122] ata1.00: qc timeout (cmd 0xec) [ 7.410238] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 7.874051] ata1: softreset failed (device not ready) [ 7.879108] ata1: applying SB600 PMP SRST workaround and retrying [ 8.038043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 18.042696] ata1.00: qc timeout (cmd 0xec) [ 18.046809] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 18.052903] ata1: limiting SATA link speed to 1.5 Gbps [ 18.515635] ata1: softreset failed (device not ready) [ 18.520692] ata1: applying SB600 PMP SRST workaround and retrying [ 18.679630] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.681630] ata1.00: qc timeout (cmd 0xec) [ 48.685742] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 49.149568] ata1: softreset failed (device not ready) [ 49.154627] ata1: applying SB600 PMP SRST workaround and retrying [ 49.313563] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.330696] Freeing unused kernel memory: 372k freed [ 49.336697] Write protecting the kernel text: 3340k [ 49.341710] Write protecting the kernel read-only data: 1564k Mounting proc fi[ 49.355181] do_IRQ: 16 callbacks suppressed lesystem [ 49.356169] do_IRQ: 2.55 No irq handler for vector (irq -1) [ 49.360767] do_IRQ: 6.55 No irq handler for vector (irq -1) [ 49.360780] do_IRQ: 4.55 No irq handler for vector (irq -1) [ 49.355482] do_IRQ: 1.55 No irq handler for vector (irq -1) Mounting sysfs f[ 49.372768] do_IRQ: 3.55 No irq handler for vector (irq -1) [ 49.372778] do_IRQ: 4.55 No irq handler for vector (irq -1) ilesystem [ 49.372789] do_IRQ: 5.55 No irq handler for vector (irq -1) [ 49.372800] do_IRQ: 6.55 No irq handler for vector (irq -1) [ 49.372813] do_IRQ: 7.55 No irq handler for vector (irq -1) [ 49.372824] do_IRQ: 1.55 No irq handler for vector (irq -1) Creating /dev [ 49.692854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Creating initial device nodes [ 49.706978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 49.713356] modprobe used greatest stack depth: 6828 bytes left [ 49.726499] uhci_hcd: USB Universal Host Controller Interface driver

1 0

[commit] r5667 - trunk/util/superiotool
by repository service 23 Jul '10

23 Jul '10

Author: hailfinger Date: Fri Jul 23 00:56:44 2010 New Revision: 5667 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5667 Log: Superiotool support for Nuvoton WPCE775x/NPCE781x. Signed-off-by: David Hendricks <dhendrix(a)google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Added: trunk/util/superiotool/nuvoton.c Modified: trunk/util/superiotool/Makefile trunk/util/superiotool/superiotool.h Modified: trunk/util/superiotool/Makefile ============================================================================== --- trunk/util/superiotool/Makefile Fri Jul 16 22:02:09 2010 (r5666) +++ trunk/util/superiotool/Makefile Fri Jul 23 00:56:44 2010 (r5667) @@ -32,7 +32,7 @@ CFLAGS = -O2 -Wall -Werror -Wstrict-prototypes -Wundef -Wstrict-aliasing \ -Werror-implicit-function-declaration -ansi -pedantic $(SVNDEF) -OBJS = superiotool.o ali.o fintek.o ite.o nsc.o smsc.o winbond.o +OBJS = superiotool.o ali.o fintek.o ite.o nsc.o nuvoton.o smsc.o winbond.o OS_ARCH = $(shell uname) ifeq ($(OS_ARCH), Darwin) Added: trunk/util/superiotool/nuvoton.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/util/superiotool/nuvoton.c Fri Jul 23 00:56:44 2010 (r5667) @@ -0,0 +1,107 @@ +/* + * This file is part of the superiotool project. + * + * Copyright (C) 2010 Google Inc. + * Written by David Hendricks <dhendrix(a)google.com> for Nuvoton Technology Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "superiotool.h" + +#define DEVICE_ID_REG 0x20 /* Super I/O ID (SID) / family */ +#define DEVICE_REV_REG 0x27 /* Super I/O revision ID (SRID) */ + +static const struct superio_registers reg_table[] = { + {0xfc, "WPCE775x / NPCE781x", { + {NOLDN, NULL, + {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28, + 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0xFC,0x11,RSVD,RSVD,RSVD,0x00,0x00,MISC,0x00, + 0x04,RSVD,RSVD,RSVD,0x00,RSVD,RSVD,EOT}}, + {0x03, "CIR Port (CIRP)", /* where supported */ + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT}, + {0x00,0x03,0xf8,0x04,0x03,0x04,0x04,0x02,EOT}}, + {0x04, "Mobile System Wake-Up Control Config (MSWC)", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x00,0x00,0x03,0x04,0x04,EOT}}, + {0x05, "Mouse config (KBC)", + {0x30,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x0c,0x03,0x04,0x04,EOT}}, + {0x06, "Keyboard config (KBC)", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x60,0x00,0x64,0x01,0x03,0x04,0x04,EOT}}, + {0x0f, "Shared memory (SHM)", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,0xf1,0xf2, + 0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x04,0x04,MISC,0x07,RSVD, + RSVD,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x11, "Power management I/F Channel 1 (PM1)", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x62,0x00,0x66,0x01,0x03,0x04,0x04,EOT}}, + {0x12, "Power management I/F Channel 2 (PM2)", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x68,0x00,0x6c,0x01,0x03,0x04,0x04,EOT}}, + {0x15, "Enhanced Wake On CIR (EWOC)", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x04,EOT}}, + {0x17, "Power Management I/F Channel 3 (PM3)", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x74,0x75,EOT}, + {0x00,0x00,0x6a,0x00,0x6e,0x01,0x03,0x04,0x04,EOT}}, + {0x1a, "Serial Port with Fast Infrared Port (FIR)", + {0x30,0x60,0x61,0x70,0x71,0x74,0x75,0xf0,EOT}, + {0x00,0x02,0xf8,0x03,0x03,0x04,0x04,0x02,EOT}}, + {EOT}}}, + {EOT} +}; + +void probe_idregs_nuvoton(uint16_t port) +{ + uint8_t sid, srid; + uint8_t chip_id = 0, chip_rev = 0; + + probing_for("Nuvoton", "(sid=0xfc) ", port); + + sid = regval(port, DEVICE_ID_REG); + srid = regval(port, DEVICE_REV_REG); + + if (sid == 0xfc) { /* WPCE775xL family */ + /* + * bits 7-5: Chip ID + * bits 4-0: Chip revision + */ + chip_id = srid >> 5; + chip_rev = srid & 0x1f; + } + + if (superio_unknown(reg_table, sid)) { + if (verbose) + printf(NOTFOUND + "sid=0x%02x, id=0x%02x, rev=0x%02x\n", sid, + chip_id, chip_rev); + return; + } + + printf("Found Nuvoton %s (id=0x%02x, rev=0x%02x) at 0x%x\n", + get_superio_name(reg_table, sid), chip_id, chip_rev, port); + chip_found = 1; + + dump_superio("Nuvoton", reg_table, port, sid, LDN_SEL); +} + +void print_nuvoton_chips(void) +{ + print_vendor_chips("Nuvoton", reg_table); +} Modified: trunk/util/superiotool/superiotool.h ============================================================================== --- trunk/util/superiotool/superiotool.h Fri Jul 16 22:02:09 2010 (r5666) +++ trunk/util/superiotool/superiotool.h Fri Jul 23 00:56:44 2010 (r5667) @@ -143,6 +143,10 @@ void probe_idregs_nsc(uint16_t port); void print_nsc_chips(void); +/* nuvoton.c */ +void probe_idregs_nuvoton(uint16_t port); +void print_nuvoton_chips(void); + /* smsc.c */ void probe_idregs_smsc(uint16_t port); void print_smsc_chips(void); @@ -167,6 +171,9 @@ /* Only use 0x370 for ITE, but 0x3f0 or 0x3bd would also be valid. */ {probe_idregs_ite, {0x2e, 0x4e, 0x370, EOT}}, {probe_idregs_nsc, {0x2e, 0x4e, 0x15c, EOT}}, + /* I/O pairs on Nuvoton EC chips can be configured by firmware in + * addition to the following hardware strapping options. */ + {probe_idregs_nuvoton, {0x164e, 0x2e, EOT}}, {probe_idregs_smsc, {0x2e, 0x4e, 0x162e, 0x164e, 0x3f0, 0x370, EOT}}, {probe_idregs_winbond, {0x2e, 0x4e, 0x3f0, 0x370, 0x250, EOT}}, #ifdef PCI_SUPPORT @@ -182,6 +189,7 @@ {print_fintek_chips}, {print_ite_chips}, {print_nsc_chips}, + {print_nuvoton_chips}, {print_smsc_chips}, {print_winbond_chips}, #ifdef PCI_SUPPORT

1 0

Roda RK886EX troubles
by Vitaly Chertovskih 22 Jul '10

22 Jul '10

Hi! I'm experiencing some troubles in installing coreboot on Roda RK886EX. Please, help me. Is there some manual about installation coreboot on Roda? I build coreboot, choosing Roda motherboard, adding compiled SeaBIOS image (I download it from coreboot.org), and including VGA onboard rom, grabbed from /dev/mem as described in howtos on coreboot.org. But, after flashing using flashrom, nothing happens. Screen blinks once, and nothing happens at all. I include my .config file, maybe it helps... Please, help me. What am I doing wrong?

5 5

Del firmware malware
by ron minnich 22 Jul '10

22 Jul '10

Wow, top hit on google. But I'm confused. http://www.infoworld.com/t/malware/dells-response-motherboard-malware-cause… "The W32.Spybot worm was discovered in flash storage on the motherboard during Dell testing. The malware does not reside in the firmware." Er, um, the firmware is in Flash I thought. OK, there's more than one Flash part I assume. OK, what's that mean? In the Flash in the case the Flash file system used by EFI? Why is there flash storage on the motherboard? As you can guess, getting some information out of Dell or the journalists is essentially impossible. I like this one: "Systems running non-Microsoft Windows operating systems cannot be affected.". Which won't stop IT departments everywhere from continuing to mandate Windows :-) (yes, I realize I'm being unfair :-) This one is even stranger: "Remaining systems can only be exposed if the customer chooses to run an update to either Unified Server Configurator (USC) or 32-bit Diagnostics."" Eh? Why would that expose remaining systems? And why would this worm be run anyway? In other words, why is a worm on a Flash part on the mainboard being run? What other software is in that part that is also being run that we don't know about? This is very curious. ron

3 2

blogs.coreboot.org suggestion
by Björn Busse 22 Jul '10

22 Jul '10

Hi List, since it is fairly common to have a subdomain 'planet' for blog aggregators in the foss world, i suggest making blogs.coreboot.org also available under planet.coreboot org. compare: planet.gentoo.org planet.freedesktop.org planet.debian.org Thanks, Björn Busse ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

mainboard pcie/gfx reset problems
by Qing Pei Wang 22 Jul '10

22 Jul '10

hi all Is there any method to find out which GPIO PIN of SB700 is used as PCIe and GFX slot reset? -- Wang Qing Pei Phone: 86+13426369984

2 1

Coreboot NB RS780 Routing
by Grant 22 Jul '10

22 Jul '10

Hi all, In my AMD RS780 project, two Marvel Lan chips connect to PCIE GPP port 0&1. One wireless lan chip connects to PCIE GPP port 2. In AMI BIOS, I see Bus 0 Dev4&5&6. But in coreboot, I see BUS 0 DEV 9&a. Is that normal? BR Grant

2 1

It finally happened.
by ron minnich 21 Jul '10

21 Jul '10

We predicted this possibility about 10 years ago, and have been warning about it almost continuously since then, but could not get people to listen. http://www.newscientist.com/blogs/shortsharpscience/2010/07/pc-giant-warns-… I wonder if they'll start listening now? ron

3 2

← Newer
1
...
4
5
6
7
8
9
10
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot July 2010