coreboot July 2010

coreboot@coreboot.org

57 participants
142 discussions

Re: [coreboot] [offlist] coreboot on Dell c600
by CybFr 21 Jul '10

21 Jul '10

Le Wednesday 30 June 2010 20:49:21 Joseph Smith, vous avez écrit : > On Wed, 30 Jun 2010 19:43:29 +0200, CybFr <coreboot(a)miradou.com> wrote: > > Le Wednesday 30 June 2010 13:19:48 Joseph Smith, vous avez écrit : > >> On Wed, 30 Jun 2010 09:30:20 +0200, CybFr <coreboot(a)miradou.com> wrote: > >> > Hello, > >> > > >> > I tried to port coreboot to c610 but stopped at desoldering flash > > > > step... > > > >> > So I > >> > have a board, it boots with dell bios (I tried yesterday) and I can > > > > give > > > >> it > >> > >> > to > >> > the cause (I have another c610 on wich I will love to run coreboot). > >> > > >> > Any ideas to minimize send costs ?? (I'm in France) > >> > >> Hello, > >> I would love to port the C610. I am particularly interested because I > > > > would > > > >> love to see AGP support for the Intel 830M, plus of course coreboot > > > > running > > > >> on a laptop :-) > >> > >> Let me know if this works for you, I am located in the US. > > > > OK, if you give me a post address, I can send it to you tomorrow. > > Ok, Great :-) > > Joseph Smith > 168 Pleasant St. > Franklin, NH 03235 > USA Sorry , I'm a bit late but the parcell is at the post office and should arrived in two weeks. Let me know when you get it. Sincerely, -- François-Régis

1 0

[PATCH]Jetway PA78VM5
by Qing Pei Wang 20 Jul '10

20 Jul '10

hi all, in order to make the code much clear, i update the patch which sent yesterday to make all messages fit for "PA78VM5". Signed-off-by Wang Qing Pei <wangqingpei(a)gmail.com> -- Wang Qing Pei Phone: 86+13426369984

2 2

Re: [coreboot] compiling coreboot
by anders＠jenbo.dk 20 Jul '10

20 Jul '10

All your questions are answered on the wiki, in the make file or in the docs. Go read them. Mvh Anders ----- Reply message ----- Fra: "Rudolf Marek" <r.marek(a)assembler.cz> Dato: tir., jul. 20, 2010 15:52 Emne: [coreboot] compiling coreboot Til: "ali hagigat" <hagigatali(a)gmail.com> Cc: <coreboot(a)coreboot.org> You did not read my last email didn't you? Do you think we are an expert system to ask? Do you think we have time to waste with you? Of course not, if are not able to get this, go away and find some other people to bother. No, thanks, Rudolf Dne 20.7.2010 13:14, ali hagigat napsal(a): > If i execute only this command at the root folder of Coreboot source tree : > make > > Will the project be compiled with GCC of the system or GCC of the system > will be patched and changed or it will be compiled exactly with regular > GCC of the linux operating system? > > Besides will be the object files in elf format and when they are linked? > Is there any possibility for other formats? > -- coreboot mailing list: coreboot(a)coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot

1 0

.sv folder of coreboot
by ali hagigat 20 Jul '10

20 Jul '10

There is a .svn folder with some files and folders. How they are created?

1 0

filo kconfig patch of libpayload
by baiyin cai 19 Jul '10

19 Jul '10

hi all, the patch did the following things: 1) load libpayload kconfig while configuring filo. 2) build libpayload before filo building. it can be used by : $MAKE LIBCONFIG_PATH=/path/to/libpayload" Any suggestion will be welcome. thanks

3 3

[FILO] r135 - in trunk/filo: . util/kconfig
by repository service 19 Jul '10

19 Jul '10

Author: mjones Date: Mon Jul 19 20:33:46 2010 New Revision: 135 URL: http://tracker.coreboot.org/trac/filo/changeset/135 Log: This patch builds libpayload for filo from filo. There are two steps: 1) load libpayload kconfig while configuring filo. 2) build libpayload before filo building. it can be used by : $MAKE LIBCONFIG_PATH=/path/to/libpayload" The filo copy of libpayload is kept locally in the build directory for the next rebuild. Signed-off-by: Cai Bai Yin <caibaiyin.pku(a)gmail.com> Acked-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Acked-by: Marc Jones <marcj303(a)gmail.com> Modified: trunk/filo/Makefile trunk/filo/util/kconfig/Makefile Modified: trunk/filo/Makefile ============================================================================== --- trunk/filo/Makefile Mon Jul 19 19:56:38 2010 (r134) +++ trunk/filo/Makefile Mon Jul 19 20:33:46 2010 (r135) @@ -24,6 +24,7 @@ export srck := $(src)/util/kconfig export obj := $(src)/build export objk := $(src)/build/util/kconfig +export LIBCONFIG_PATH := $(src)/../libpayload export KERNELVERSION := $(PROGRAM_VERSION) export KCONFIG_AUTOHEADER := $(obj)/config.h @@ -102,19 +103,29 @@ TARGET = $(obj)/filo.elf +HAVE_LIBCONFIG := $(wildcard $(LIBCONFIG_PATH)) + +all: prepare $(obj)/version.h $(TARGET) + + HAVE_LIBPAYLOAD := $(wildcard $(LIBPAYLOAD)) -ifeq ($(strip $(HAVE_LIBPAYLOAD)),) -all: - @printf "\nError: libpayload is not installed!\nexpected: $(LIBPAYLOAD).\n" +ifneq ($(strip $(HAVE_LIBPAYLOAD)),) +libpayload: + @printf "Found Libpayload $(LIBPAYLOAD).\n" else -all: prepare $(obj)/version.h $(TARGET) +libpayload: $(src)/$(LIB_CONFIG) + $(Q)printf "building libpayload.\n" + $(Q)make -C $(LIBCONFIG_PATH) distclean + $(Q)cp lib.config $(LIBCONFIG_PATH)/.config + $(Q)make -C $(LIBCONFIG_PATH) oldconfig + $(Q)make -C $(LIBCONFIG_PATH) DESTDIR=$(src)/build install endif -$(obj)/filo: $(src)/.config $(OBJS) +$(obj)/filo: $(src)/.config $(OBJS) libpayload $(Q)printf " LD $(subst $(shell pwd)/,,$(@))\n" $(Q)$(LD) -N -T $(ARCHDIR-y)/ldscript -o $@ $(OBJS) $(LIBPAYLOAD) $(LIBGCC) -$(TARGET): $(obj)/filo +$(TARGET): $(obj)/filo libpayload $(Q)cp $(obj)/filo $@ $(Q)$(NM) $(obj)/filo | sort > $(obj)/filo.map $(Q)printf " STRIP $(subst $(shell pwd)/,,$(@))\n" @@ -122,7 +133,7 @@ include util/kconfig/Makefile -$(obj)/%.o: $(src)/%.c +$(obj)/%.o: $(src)/%.c libpayload $(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n" $(Q)$(CC) -MMD $(CFLAGS) $(CPPFLAGS) -c -o $@ $< @@ -148,7 +159,7 @@ distclean: clean $(Q)rm -rf build - $(Q)rm -f .config .config.old ..config.tmp .kconfig.d .tmpconfig* + $(Q)rm -f .config lib.config .config.old ..config.tmp .kconfig.d .tmpconfig* FORCE: Modified: trunk/filo/util/kconfig/Makefile ============================================================================== --- trunk/filo/util/kconfig/Makefile Mon Jul 19 19:56:38 2010 (r134) +++ trunk/filo/util/kconfig/Makefile Mon Jul 19 20:33:46 2010 (r135) @@ -12,23 +12,161 @@ Kconfig := Config.in +FILO_CONFIG := $(src)/.config +LIB_CONFIG := $(src)/lib.config +HAVE_FILO_CONFIG := $(wildcard $(FILO_CONFIG)) +HAVE_LIB_CONFIG := $(wildcard $(LIB_CONFIG)) + +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) xconfig: prepare $(objk)/qconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/qconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) $(Q)$(objk)/qconf $(Kconfig) +else +xconfig: prepare $(objk)/qconf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else +xconfig: prepare $(objk)/qconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/qconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)$(objk)/qconf $(Kconfig) +endif +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) +gconfig: prepare $(objk)/gconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/gconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) + $(Q)$(objk)/gconf $(Kconfig) +else +gconfig: prepare $(objk)/gconf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else gconfig: prepare $(objk)/gconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/gconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" $(Q)$(objk)/gconf $(Kconfig) +endif +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) +menuconfig: prepare $(objk)/mconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/mconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) + $(Q)$(objk)/mconf $(Kconfig) +else +menuconfig: prepare $(objk)/mconf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else menuconfig: prepare $(objk)/mconf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/mconf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" $(Q)$(objk)/mconf $(Kconfig) +endif +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) config: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/conf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) $(Q)$(objk)/conf $(Kconfig) +else +config: prepare $(objk)/conf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else +config: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/conf $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)$(objk)/conf $(Kconfig) +endif +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) +oldconfig: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/conf -o $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) + $(Q)$(objk)/conf -o $(Kconfig) +else oldconfig: prepare $(objk)/conf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else +oldconfig: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/conf -o $(LIBCONFIG_PATH)/Config.in + $(Q)mv .config $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" $(Q)$(objk)/conf -o $(Kconfig) +endif +ifneq ($(strip $(HAVE_FILO_CONFIG)),) +ifneq ($(strip $(HAVE_LIB_CONFIG)),) silentoldconfig: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)mv $(FILO_CONFIG) $(FILO_CONFIG)."temp" + $(Q)mv $(LIB_CONFIG) $(FILO_CONFIG) + $(Q)$(objk)/conf -s $(LIBCONFIG_PATH)/Config.in + $(Q)mv $(FILO_CONFIG) $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)mv $(FILO_CONFIG)."temp" $(FILO_CONFIG) $(Q)$(objk)/conf -s $(Kconfig) +else +silentoldconfig: prepare $(objk)/conf + $(Q)printf "Lost libpayload config file.\n" + $(Q)rm -f $(FILO_CONFIG) +endif +else +silentoldconfig: prepare $(objk)/conf + $(Q)printf "Libpayload config for FILO.\n" + $(Q)$(objk)/conf -s $(LIBCONFIG_PATH)/Config.in + $(Q)mv .config $(LIB_CONFIG) + $(Q)printf "Libpayload config done.\n" + $(Q)$(objk)/conf -s $(Kconfig) + +endif # --- UNUSED, ignore ---------------------------------------------------------- # Create new linux.pot file

1 0

filo xcompile patch
by baiyin cai 19 Jul '10

19 Jul '10

this patch is used for filo xcompile fix. Signed-off-by: Cai Bai Yin <caibaiyin.pku(a)gmail.com><caibaiyin.pku(a)gmail.com>

2 1

[FILO] r134 - trunk/filo/util/xcompile
by repository service 19 Jul '10

19 Jul '10

Author: mjones Date: Mon Jul 19 19:56:38 2010 New Revision: 134 URL: http://tracker.coreboot.org/trac/filo/changeset/134 Log: This patch fixes xcompile for filo located in coreboot/payloads. This goes with the follow-on patch to put filo and libpayload in the same place. Signed-off-by: Cai Bai Yin <caibaiyin.pku(a)gmail.com> Acked-by: Marc Jones <marcj303(a)gmail.com> Modified: trunk/filo/util/xcompile/xcompile Modified: trunk/filo/util/xcompile/xcompile ============================================================================== --- trunk/filo/util/xcompile/xcompile Thu Jun 3 19:36:15 2010 (r133) +++ trunk/filo/util/xcompile/xcompile Mon Jul 19 19:56:38 2010 (r134) @@ -41,7 +41,7 @@ # This should be a loop over all supported architectures TARCH=i386 TWIDTH=32 -for gccprefixes in `pwd`/util/crossgcc/xgcc/bin/${TARCH}-elf- ${TARCH}-elf- ""; do +for gccprefixes in `pwd`/../../util/crossgcc/xgcc/bin/${TARCH}-elf- ${TARCH}-elf- ""; do if ! which ${gccprefixes}as 2>/dev/null >/dev/null; then continue fi

1 0

Trac reminder: list of new ticket(s)
by coreboot tracker 19 Jul '10

19 Jul '10

1 0

GIGABYTE GA785GMT-UD2H coreboot porting problems
by Qing Pei Wang 19 Jul '10

19 Jul '10

hi, i am trying to port coreboot to 785/710 mainboard which is gigabyte ga785gmt-ud2h. the problem now is it reboots while decompress cbfs by executing "memcpy". i would like to doubt that ddr3 is not configured correctly. the log is attached. any suggestion is welcome. thanks -- Wang Qing Pei Phone: 86+13426369984

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot July 2010