coreboot May 2010

coreboot@coreboot.org

59 participants
300 discussions

[commit] r5584 - trunk/src/northbridge/intel/i440bx
by repository service 25 May '10

25 May '10

Author: stepan Date: Tue May 25 18:00:08 2010 New Revision: 5584 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5584 Log: cosmetics. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/src/northbridge/intel/i440bx/raminit.h Modified: trunk/src/northbridge/intel/i440bx/raminit.h ============================================================================== --- trunk/src/northbridge/intel/i440bx/raminit.h Mon May 24 17:51:15 2010 (r5583) +++ trunk/src/northbridge/intel/i440bx/raminit.h Tue May 25 18:00:08 2010 (r5584) @@ -22,9 +22,9 @@ #define RAMINIT_H /* The 440BX supports up to four (single- or double-sided) DIMMs. */ -#define DIMM_SOCKETS 4 +#define DIMM_SOCKETS 4 /* DIMMs 1-4 are at 0x50, 0x51, 0x52, 0x53. */ -#define DIMM_SPD_BASE 0x50 +#define DIMM_SPD_BASE 0x50 #endif /* RAMINIT_H */

1 0

Indtast Bcc Geode db800 vs Wyse S50
by anders＠jenbo.dk 25 May '10

25 May '10

Is probably IDE, verrrrryyy unlikely its in the BIOS Rom. Mvh Anders ----- Reply message ----- Fra: "Oliver Schinagl" <oliver(a)schinagl.nl> Dato: tir., maj 25, 2010 14:01 Emne: [coreboot] Geode db800 vs Wyse S50 Til: <coreboot(a)coreboot.org> On 05/25/10 13:07, Joseph Smith wrote: > > > On Tue, 25 May 2010 10:45:47 +0200, Oliver Schinagl <oliver(a)schinagl.nl> > wrote: > >> On 05/25/10 00:16, Joseph Smith wrote: >> >>> On 05/24/2010 04:36 PM, Nils wrote: >>> >>>> Hi Oliver, >>>> >>>> Oliver wrote: >>>> >>>>> I just found http://www.coreboot.org/AMD_Geode_Porting_Guide over on >>>>> the wiki and was wondering if that was maybe slightly outdated or not >>>>> needed for a Wyse S10? The S10 uses similar hardware as the S50. >>>>> >>>> The wiki page is a little outdated. >>>> >>>>> Actually the only difference is that the S50 has 128kb onboard flash, >>>>> so minor difference. >>>>> >>>> Are you sure ? >>>> Joseph reported that his S30 uses a cs5535 instead of the cs5536 on the >>>> S50. >>>> >>> Yes my S30 has a GX2 and cs5535.From what I have read both the S30 and >>> S50 are upgradable to the S10. It is just a bios and software upgrade. >>> >>> On another note I just got a V30L, sweet little VIA C& machine.... >>> >>> Hope that helps. >>> >>> >> Hmm; I thought that the S10 was the most basic version :) >> >> >> Processor: AMD Geode GX 366MHz >> Memory: 0 Flash/128MB RAM >> >> > So S10 has 0 flash??? Does it just PXE boot? > > Well it has a 2MB Bios chip, so I suppose the Wyse OS lives in the biosflash area? Other then that, it only supports RDP, ICA int he Wyse OS; booting it does from the following 3 options, IDE, PXE, USB. I'll take a foto of the bios, though it really isn't interesting at all. >> As the S50 reads: >> Processor: AMD Geode GX 366MHz >> Memory: 128MB Flash/256MB RAM >> >> btw they use a gx in the spec instead of gx2; odd. >> >> > Yes you will see that alot, the GX is actually the sucsesor to the GX1. > Others will call it GX2 for clarification (me :-)). > Ah! ok so there was GX1; and GX, but we call GX GX2 to make it sound as a successor, as it is. I know linux uses GX2 in it's naming. >> The S30 lists the same btw: >> >> Processor: AMD Geode GX 366MHz >> Memory: 64MB Flash/128MB RAM >> >> > S30 comes with different flash/ram combos. > Mine has 32MB Flash/ 64MB RAM > I wonder where the flash is located at, in the bios chip, or if it's an IDE devices 'flash' thing. >> >> So besides the tool outputs etc etc I posted earlier; I'll take loads of >> pics. Do I need to pry off the CPUs heatsink for a pic of that? Since I >> don't know how to best re-attach it; id' like to postpone that. >> >> > Yes I think this is a great idea :-) No need to take the heatsink off, we > already know what the CPU is. I propose a new wiki page "Wyse Thin Clients" > That we can upload pics too, and information about each system. I have 3 or > 4 different models so a central info point would be cool. I would be glad > to take lots of pics too. > Ok I'll do my best to make some nice pics of front/back of the pcb and some of the chips. > >> Also not having a GX VSA is kinda really off-putting; it basically means >> I can't use coreboot on this thing yet? How did people do it on the S30 >> and more specifically the S50? The S50 does list as being supported, how? >> >> > Don't worry about VSA too much, I am sure we can up with a solution when we > get to that point. > > Ok. Atm I have compiled everything and it seemed to build after some tweaking fine; using the Wyse S50 mainboard. -- coreboot mailing list: coreboot(a)coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot

1 0

Re: [coreboot] Indtast Bcc Indtast Bcc Indtast Bcc Wyse S10 and coreboot
by Oliver Schinagl 25 May '10

25 May '10

On 05/21/2010 08:28 AM, anders(a)jenbo.dk wrote: > You will need the developer package of pciutils, use the name on the > wiki it is in the ubuntu repository. I couldn't find it, well unless it's pciutils and pci-utils-dev :p I'll search more. > > Yes seabios is the best to start of with, download it via git, and > configure it as a payload (se wiki) then make it. All right. > > For coreboot al you need to do is pick s50 as the board, pick the > right Rom size, point to the payload. The romsize defaults to 256k but according to flashrom (And the markings on the chip) it's a 2mb flash unit? Also there's a lot of VGA, VSA and other settings that where very confusing as I read somewhere on the wiki; that the Geode GX2/LX don't support VGA things? And the VSA bit, I found that there is OpenVSA but it's highly experimental? Do I need it at all? > As for network boot you will need an additional tool (look at the wiki). GPXE stuff I belive? Thank you for your time so far! Oliver

3 5

Indtast Bcc Geode db800 vs Wyse S50
by anders＠jenbo.dk 25 May '10

25 May '10

Leave the heat sink on. Mvh Anders ----- Reply message ----- Fra: "Oliver Schinagl" <oliver(a)schinagl.nl> Dato: tir., maj 25, 2010 10:45 Emne: [coreboot] Geode db800 vs Wyse S50 Til: <coreboot(a)coreboot.org> On 05/25/10 00:16, Joseph Smith wrote: > On 05/24/2010 04:36 PM, Nils wrote: >> Hi Oliver, >> >> Oliver wrote: >>> I just found http://www.coreboot.org/AMD_Geode_Porting_Guide over on >>> the wiki and was wondering if that was maybe slighlty outdated or not >>> needed for a Wyse S10? The S10 uses similar hardware as the S50. >> The wiki page is a little outdated. >>> Actually the only difference is that the S50 has 128kb onboard flash, >>> so minor difference. >> Are you sure ? >> Joseph reported that his S30 uses a cs5535 insted of the cs5536 on the >> S50. > > Yes my S30 has a GX2 and cs5535.From what I have read both the S30 and > S50 are upgradable to the S10. It is just a bios and software upgrade. > > On another note I just got a V30L, sweet little VIA C& machine.... > > Hope that helps. > Hmm; I thought that the S10 was the most basic version :) Processor: AMD Geode GX 366MHz Memory: 0 Flash/128MB RAM As the S50 reads: Processor: AMD Geode GX 366MHz Memory: 128MB Flash/256MB RAM btw they use a gx in the spec instead of gx2; odd. The S30 lists the same btw: Processor: AMD Geode GX 366MHz Memory: 64MB Flash/128MB RAM So besides the tool outputs etc etc I posted earlier; I'll take loads of pics. Do I need to pry off the CPU's heatsink for a pic of that? Since I don't know how to best re-attach it; id' like to postpone that. Also not having a GX VSA is kinda really off-putting; it basically means I can't use corebios on this thing yet? How did people do it on the S30 and more specifically the S50? The S50 does list as being supported, how? Oliver -- coreboot mailing list: coreboot(a)coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot

1 0

Will coreboot work on my machine?
by am kara 25 May '10

25 May '10

Mother board: ASUS, E2938, Commando, CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Chipset: Intel P965/ICH8R with Intel fast memory access technology ------------------------------------------------------------------------------------- lspci -tvnn -[0000:00]-+-00.0 Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] +-01.0-[01]----00.0 nVidia Corporation G72 [GeForce 7300 SE] [10de:01d3] +-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] +-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] +-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] +-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] +-1c.0-[04]-- +-1c.4-[03]--+-00.0 JMicron Technologies, Inc. 20360/20363 Serial ATA Controller [197b:2363] | \-00.1 JMicron Technologies, Inc. 20360/20363 Serial ATA Controller [197b:2363] +-1c.5-[02]----00.0 Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] +-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] +-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] +-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] +-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] +-1e.0-[05]--+-00.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] | +-02.0 Device [4348:3253] | +-03.0 Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] | \-04.0 Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] +-1f.0 Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] +-1f.2 Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] +-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] \-1f.5 Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] ------------------------------------------------------------------------------------- superiotool -dV superiotool r5537 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x4400, id=0x23a0 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xa023, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627DHG (id=0xa0, rev=0x23) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff a0 23 ff 00 44 00 00 ff 50 08 00 00 9a 21 00 ff def 00 a0 NA ff 00 MM 00 MM RR 50 00 00 RR e2 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 8e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 07 04 3f def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 83 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial peripheral interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 6) idx 30 f4 f5 f6 f7 val 0e ff 0d 00 00 def 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe val 0f de 20 00 fb 0c 00 00 00 00 00 f3 0c 00 09 04 7f 00 00 00 def 00 ff 00 00 ff 00 00 00 00 00 00 ff 00 00 00 ff 00 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe val 00 00 00 64 ff 00 00 12 1c 10 09 00 7d 00 00 00 00 00 def 00 00 01 00 ff 08 00 RR 1c 00 RR RR 7c 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 f2 val 01 02 90 00 81 4e 83 def 00 00 00 00 81 00 00 LDN 0x0c (PECI, SST) idx e0 e1 e2 e3 e4 e5 e8 f1 fe ff val 10 48 48 48 48 00 01 48 f2 80 def 00 48 48 48 48 00 00 48 00 00 Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. ------------------------------------------------------------------------------------- flashrom -V flashrom v0.9.1-r995 on Linux 2.6.315.mstep3 (i686), built with libpci 3.1.6, GCC 4.4.3 20100427 (Red Hat 4.4.3-19) No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "Commando" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH8/ICH8R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x400464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x2000 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 0, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00000000 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2388M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1005 us, 10000 myus = 9984 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x7e, id2 0x1a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x7e, id2 0x1a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xa7, id2 0x7a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x7e, id2 0x1a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x7e, id2 0x1a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rems: id1 0xef, id2 0x13 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. ------------------------------------------------------------------------------------- URL to the mainboard specifications page: http://usa.asus.com/product.aspx?P_ID=wWs3CTw57UtxaaHw -------------------------------------------------------------------------------------

1 0

Welcome coreboot developer blogs
by Stefan Reinauer 25 May '10

25 May '10

Hi, last week we started a coreboot developer blog: http://blogs.coreboot.org/ This is starting out as the place where you can read about news from our five GSoC students, and I think they are doing great already. Go check it out! But the blog is not required to be a GSoC only thing. If you're a coreboot developer and want to post your coreboot related news to this blog, please contact me for an account. Hope you enjoy this. Best regards, Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

2 1

[FILO] r132 - trunk/filo/fs
by repository service 24 May '10

24 May '10

Author: stepan Date: Mon May 24 23:59:35 2010 New Revision: 132 URL: http://tracker.coreboot.org/trac/filo/changeset/132 Log: Fix RR alignment bug in the grubfs iso9660 driver which prevented CD directory entries from being read correctly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland(a)siriusit.co.uk> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/filo/fs/fsys_iso9660.c Modified: trunk/filo/fs/fsys_iso9660.c ============================================================================== --- trunk/filo/fs/fsys_iso9660.c Wed May 19 18:31:36 2010 (r131) +++ trunk/filo/fs/fsys_iso9660.c Mon May 24 23:59:35 2010 (r132) @@ -164,8 +164,8 @@ rr_ptr.ptr = ((unsigned char *)idr + idr->name_len.l + sizeof(struct iso_directory_record) - sizeof(idr->name)); - if (rr_ptr.i & 1) - rr_ptr.i++, rr_len--; + if (rr_len & 1) + rr_ptr.ptr++, rr_len--; ce_ptr = NULL; rr_flag = RR_FLAG_NM | RR_FLAG_PX;

1 0

AMD Geode db800 vs Wyse S50
by Oliver Schinagl 24 May '10

24 May '10

Hey all, I was reading through the following page: http://www.coreboot.org/AMD_Geode_Porting_Guide and was wondering if that page is outdated, especially concidering there exists a profile in the menuconfig for the Wyse S50. I'm trying to get coreboot working on an S10 (identical parts; except flash size). Oliver

2 1

Sorry
by Oliver Schinagl 24 May '10

24 May '10

Sorry for the double posting; I wasn't sure if the other one was sent properly as I lost my connection and didn't see the other one come in so I figured it went bust. Sorry.

1 0

Geode db800 vs Wyse S50
by Oliver Schinagl 24 May '10

24 May '10

Hey all, I just found http://www.coreboot.org/AMD_Geode_Porting_Guide over on the wiki and was wondering if that was maybe slighlty outdated or not needed for a Wyse S10? The S10 uses similar hardware as the S50. Actually the only difference is that the S50 has 128kb onboard flash, so minor difference. E.g. If i just build for the S50 in make menuconfig; I won't need to read that page right? Also it mentions padding etc on the VSA bin; I take it make menuconfig takes care of that as well now? Thanks, Oliver

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot May 2010