coreboot February 2008

coreboot@coreboot.org

77 participants
422 discussions

r3109 build service
by coreboot information 19 Feb '08

19 Feb '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "ruik" checked in revision 3109 to the coreboot source repository and caused the following changes: Change Log: I'm attaching the patch which should fix both problems. Fix the undefined u8 type and the bitpos selection in currently unused pnp_read_enable function. Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3109&device=serengeti_chee… Compilation of embeddedplanet:ep405pc has been fixed Compilation of motorola:sandpointx3_altimus_mpc7410 has been fixed Compilation of totalimpact:briq has been fixed If something broke during this checkin please be a pain in ruik's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Re: [coreboot] r3104 - trunk/coreboot-v2/src/devices
by Ulf Jordan 19 Feb '08

19 Feb '08

On Mon, 18 Feb 2008, svn(a)coreboot.org wrote: > void pnp_set_enable(device_t dev, int enable) > { > - pnp_write_config(dev, 0x30, enable?0x1:0x0); > + u8 tmp, bitpos; > + > + tmp = pnp_read_config(dev, 0x30); > + /* handle the virtual devices, which share same LDN register */ > + bitpos = (dev->path.u.pnp.device >> 8) & 0x7; > + > + if (enable) { > + tmp |= (1 << bitpos); > + } else { > + tmp &= ~(1 << bitpos); > + } > + pnp_write_config(dev, 0x30, tmp); > } > > int pnp_read_enable(device_t dev) > { > - return !!pnp_read_config(dev, 0x30); > + u8 tmp, bitpos; > + tmp = pnp_read_config(dev, 0x30); > + /* handle the virtual devices, which share same LDN register */ > + bitpos = (dev->path.u.pnp.device >> 8) & 0x7; > + return !!(tmp & bitpos); Hmm, shouldn't the last line test the bit at *position* bitpos: + return !!(tmp & (1 << bitpos)); /ulf

3 7

r3109 - trunk/coreboot-v2/src/devices
by svn＠coreboot.org 19 Feb '08

19 Feb '08

Author: ruik Date: 2008-02-19 21:30:25 +0100 (Tue, 19 Feb 2008) New Revision: 3109 Modified: trunk/coreboot-v2/src/devices/pnp_device.c Log: I'm attaching the patch which should fix both problems. Fix the undefined u8 type and the bitpos selection in currently unused pnp_read_enable function. Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/coreboot-v2/src/devices/pnp_device.c =================================================================== --- trunk/coreboot-v2/src/devices/pnp_device.c 2008-02-18 20:43:09 UTC (rev 3108) +++ trunk/coreboot-v2/src/devices/pnp_device.c 2008-02-19 20:30:25 UTC (rev 3109) @@ -51,7 +51,7 @@ void pnp_set_enable(device_t dev, int enable) { - u8 tmp, bitpos; + uint8_t tmp, bitpos; tmp = pnp_read_config(dev, 0x30); /* handle the virtual devices, which share same LDN register */ @@ -67,11 +67,11 @@ int pnp_read_enable(device_t dev) { - u8 tmp, bitpos; + uint8_t tmp, bitpos; tmp = pnp_read_config(dev, 0x30); /* handle the virtual devices, which share same LDN register */ bitpos = (dev->path.u.pnp.device >> 8) & 0x7; - return !!(tmp & bitpos); + return !!(tmp & (1 << bitpos)); } void pnp_set_iobase(device_t dev, unsigned index, unsigned iobase)

1 0

[BUILDROM] conslidate Geode targets
by Jordan Crouse 19 Feb '08

19 Feb '08

Next up on the path to openvsa, I present a patch to consolidate all of the Geode V2 targets into a single file. Every one of the Geode LX targets are identical, and consolidating them into a single file saves us much hassle. If in the future, one platform needs a patch that the others don't, then that can be easily added with the following construct: PATCHES-y= PATCHES-$(MY_PLATFORM_A) += a.patch PATCHES-$(MY_PLATFORM_B) += b.patch After this patch, we'll push the code for the new VSA download (now with NRV2B and padding!), and finally openvsa support, which at that time should be pretty darn transparent. I hope. Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. [BUILDROM] conslidate the V2 Geode targets All the Geode targets are the same, so consolidate them into a single target - this will make the forthcoming VSA changes much easier to maintain. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Index: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel.orig/config/platforms/alix1c.conf 2008-02-18 12:41:59.000000000 -0700 +++ buildrom-devel/config/platforms/alix1c.conf 2008-02-18 12:47:29.000000000 -0700 @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel.orig/config/platforms/db800.conf 2008-02-18 12:47:28.000000000 -0700 +++ buildrom-devel/config/platforms/db800.conf 2008-02-18 12:47:29.000000000 -0700 @@ -14,7 +14,7 @@ # Use the same settings as the Norwich platform KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) # Use the same settings as the Norwich platform Index: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel.orig/config/platforms/dbe61.conf 2008-02-18 12:47:28.000000000 -0700 +++ buildrom-devel/config/platforms/dbe61.conf 2008-02-18 12:47:29.000000000 -0700 @@ -14,7 +14,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel.orig/config/platforms/msm800sev.conf 2008-02-18 12:41:59.000000000 -0700 +++ buildrom-devel/config/platforms/msm800sev.conf 2008-02-18 12:47:29.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel.orig/config/platforms/norwich.conf 2008-02-18 12:47:28.000000000 -0700 +++ buildrom-devel/config/platforms/norwich.conf 2008-02-18 12:47:29.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Index: buildrom-devel/packages/coreboot-v2/alix1c.mk =================================================================== --- buildrom-devel.orig/packages/coreboot-v2/alix1c.mk 2008-02-18 12:41:59.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/coreboot-v2/geodelx.mk =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ buildrom-devel/packages/coreboot-v2/geodelx.mk 2008-02-18 12:47:29.000000000 -0700 @@ -0,0 +1,38 @@ +# This target supports all Geode LX platforms +# +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_VSA): + @ echo "Fetching the VSA blob..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/coreboot-v2/msm800sev.mk =================================================================== --- buildrom-devel.orig/packages/coreboot-v2/msm800sev.mk 2008-02-18 12:41:59.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/coreboot-v2/norwich.mk =================================================================== --- buildrom-devel.orig/packages/coreboot-v2/norwich.mk 2008-02-18 12:41:59.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -else -$(warning You specified $(CBV2_TAG) a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean

2 2

r121 - buildrom-devel/packages/coreboot-v2
by svn＠coreboot.org 19 Feb '08

19 Feb '08

Author: jcrouse Date: 2008-02-19 19:05:23 +0100 (Tue, 19 Feb 2008) New Revision: 121 Removed: buildrom-devel/packages/coreboot-v2/alix1c.mk buildrom-devel/packages/coreboot-v2/msm800sev.mk buildrom-devel/packages/coreboot-v2/norwich.mk Log: Argh - these didn't get deleted from the previous commit. Deleted: buildrom-devel/packages/coreboot-v2/alix1c.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/alix1c.mk 2008-02-19 18:03:58 UTC (rev 120) +++ buildrom-devel/packages/coreboot-v2/alix1c.mk 2008-02-19 18:05:23 UTC (rev 121) @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/msm800sev.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/msm800sev.mk 2008-02-19 18:03:58 UTC (rev 120) +++ buildrom-devel/packages/coreboot-v2/msm800sev.mk 2008-02-19 18:05:23 UTC (rev 121) @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/norwich.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/norwich.mk 2008-02-19 18:03:58 UTC (rev 120) +++ buildrom-devel/packages/coreboot-v2/norwich.mk 2008-02-19 18:05:23 UTC (rev 121) @@ -1,40 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -else -$(warning You specified $(CBV2_TAG) a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean

1 0

r120 - in buildrom-devel: config/platforms packages/coreboot-v2
by svn＠coreboot.org 19 Feb '08

19 Feb '08

Author: jcrouse Date: 2008-02-19 19:03:58 +0100 (Tue, 19 Feb 2008) New Revision: 120 Added: buildrom-devel/packages/coreboot-v2/geodelx.mk Modified: buildrom-devel/config/platforms/alix1c.conf buildrom-devel/config/platforms/db800.conf buildrom-devel/config/platforms/dbe61.conf buildrom-devel/config/platforms/msm800sev.conf buildrom-devel/config/platforms/norwich.conf Log: [BUILDROM] conslidate the V2 Geode targets All the Geode targets are the same, so consolidate them into a single target - this will make the forthcoming VSA changes much easier to maintain. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel/config/platforms/alix1c.conf 2008-02-19 15:47:25 UTC (rev 119) +++ buildrom-devel/config/platforms/alix1c.conf 2008-02-19 18:03:58 UTC (rev 120) @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Modified: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel/config/platforms/db800.conf 2008-02-19 15:47:25 UTC (rev 119) +++ buildrom-devel/config/platforms/db800.conf 2008-02-19 18:03:58 UTC (rev 120) @@ -14,7 +14,7 @@ # Use the same settings as the Norwich platform KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) # Use the same settings as the Norwich platform Modified: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel/config/platforms/dbe61.conf 2008-02-19 15:47:25 UTC (rev 119) +++ buildrom-devel/config/platforms/dbe61.conf 2008-02-19 18:03:58 UTC (rev 120) @@ -14,7 +14,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Modified: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel/config/platforms/msm800sev.conf 2008-02-19 15:47:25 UTC (rev 119) +++ buildrom-devel/config/platforms/msm800sev.conf 2008-02-19 18:03:58 UTC (rev 120) @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Modified: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel/config/platforms/norwich.conf 2008-02-19 15:47:25 UTC (rev 119) +++ buildrom-devel/config/platforms/norwich.conf 2008-02-19 18:03:58 UTC (rev 120) @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk -CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk # kernel configuration (for LAB) Added: buildrom-devel/packages/coreboot-v2/geodelx.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/geodelx.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/geodelx.mk 2008-02-19 18:03:58 UTC (rev 120) @@ -0,0 +1,38 @@ +# This target supports all Geode LX platforms +# +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT) +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_VSA): + @ echo "Fetching the VSA blob..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean

1 0

Fwd: mkelfImage
by Martin-Éric Racine 19 Feb '08

19 Feb '08

---------- Forwarded message ---------- From: Martin-Éric Racine <q-funk(a)iki.fi> Date: Jul 19, 2007 7:59 PM Subject: mkelfImage To: Eric Biederman <ebiederman(a)lnxi.com>, Joshua Aune <luken(a)lnxi.com> Greetings, Being in the process of packaging mkelfImage for Debian and Ubuntu, I came across a few issues that definitely will prevent this software from being accepted by the FTP Master. Thankfully, most of them are easily fixed: * News should be called ChangeLog and include the name of whoever made each change. * Each source file (c, h, S) must include proper copyright notice and credits at the top. * The build fails unless it is ./configure'd twice, because it misses Makefile.conf. * Makefile.conf would preferably be replaced by more traditional Makefile.am and Mafefile.in to really be portable. * config.log and various other files that should be cleaned before shipping were found in the archive for mkelfImage 2.7 on the lnxi FTP server. * The filename of the archive should be all lowercase. However, a more serious problem is that it fails to compile using recent GCC and glibc6. Would it be possible for this package to be updated keeping in mind the above issues? Best regards, -- Martin-Éric Racine http://q-funk.iki.fi -- Martin-Éric Racine http://q-funk.iki.fi

4 7

[PATCH] v3: create dbe61 dts equivalent to v2 Config.lb
by Carl-Daniel Hailfinger 19 Feb '08

19 Feb '08

Modify the artecgroup/dbe61 dts to be equivalent to v2 Config.lb. The target does not yet compile due to initram breakage, but the breakage is really old. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts =================================================================== --- LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts (revision 607) +++ LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts (working copy) @@ -84,8 +84,26 @@ pci@1,0 { /config/("northbridge/amd/geodelx/pci"); }; - pci@1,1 { + pci@15,0 { /config/("southbridge/amd/cs5536/dts"); + /* Interrupt enables for LPC bus. + * Each bit is an IRQ 0-15. */ + lpc_serirq_enable = "0x00001002"; + /* LPC IRQ polarity. Each bit is an IRQ 0-15. */ + lpc_serirq_polarity = "0x0000effd"; + /* 0:continuous 1:quiet */ + lpc_serirq_mode = "1"; + /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. + * See virtual PIC spec. */ + enable_gpio_int_route = "0x0D0C0700"; + /* COM1 settings */ + com1_enable = "0"; + com1_address = "0x2f8"; + com1_irq = "3"; + /* COM2 settings */ + com2_enable = "1"; + com2_address = "0x3f8"; + com2_irq = "4"; }; }; }; -- http://www.hailfinger.org/

6 18

opions.lb
by Mikhail Savchenko 19 Feb '08

19 Feb '08

I'm already patch the Config.lb target source file basing the lspci output Looking for parameters I should get for properly edit Option.lb target source file, can anybody assist me at this?

2 1

[BUILDROM] Bump geode revisions
by Jordan Crouse 19 Feb '08

19 Feb '08

Myles very nicely made all targets use the filename coreboot.rom, and taught buildrom how to use that filename. Unfortunately, the Geode platforms didn't get the message. This patch updates the Geode platforms to use the latest svn revision to take avantage of Myles fixes. Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. [BUILDROM] Update Coreboot revision for Geode platforms The Geode platforms needed a coreboot revision bump to pull in Myle's renaming of the ROM file to the consistant coreboot.rom. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Index: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel.orig/config/platforms/db800.conf 2008-02-18 11:36:19.000000000 -0700 +++ buildrom-devel/config/platforms/db800.conf 2008-02-18 12:41:59.000000000 -0700 @@ -33,7 +33,7 @@ CBV2_CONFIG=Config.lb CBV2_PAYLOAD_FILE_EXT=elf CBV2_TDIR=db800 -CBV2_TAG=3079 +CBV2_TAG=3090 # FILO configuration # Use a new FILO config for the DB800 to autoload an image Index: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel.orig/config/platforms/norwich.conf 2008-02-18 11:35:49.000000000 -0700 +++ buildrom-devel/config/platforms/norwich.conf 2008-02-18 12:41:59.000000000 -0700 @@ -31,7 +31,7 @@ CBV2_CONFIG=Config.lb CBV2_PAYLOAD_FILE_EXT=elf CBV2_TDIR=norwich -CBV2_TAG=3079 +CBV2_TAG=3090 # FILO configuration Index: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel.orig/config/platforms/dbe61.conf 2008-02-18 12:12:41.000000000 -0700 +++ buildrom-devel/config/platforms/dbe61.conf 2008-02-18 12:41:59.000000000 -0700 @@ -32,7 +32,7 @@ CBV2_CONFIG=Config.lb CBV2_PAYLOAD_FILE_EXT=elf CBV2_TDIR=dbe61 -CBV2_TAG=3079 +CBV2_TAG=3090 # FILO configuration

2 2

← Newer
1
...
13
14
15
16
17
18
19
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2008