19 Feb
2008
19 Feb
'08
12:58 p.m.
Next up on the path to openvsa, I present a patch to consolidate all of the Geode V2 targets into a single file. Every one of the Geode LX targets are identical, and consolidating them into a single file saves us much hassle.
If in the future, one platform needs a patch that the others don't, then that can be easily added with the following construct:
PATCHES-y= PATCHES-$(MY_PLATFORM_A) += a.patch PATCHES-$(MY_PLATFORM_B) += b.patch
After this patch, we'll push the code for the new VSA download (now with NRV2B and padding!), and finally openvsa support, which at that time should be pretty darn transparent. I hope.
Jordan
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
[BUILDROM] conslidate the V2 Geode targets
All the Geode targets are the same, so consolidate them into a single
target - this will make the forthcoming VSA changes much easier to
maintain.
Signed-off-by: Jordan Crouse jordan.crouse@amd.com
Index: buildrom-devel/config/platforms/alix1c.conf
===================================================================
--- buildrom-devel.orig/config/platforms/alix1c.conf 2008-02-18 12:41:59.000000000 -0700
+++ buildrom-devel/config/platforms/alix1c.conf 2008-02-18 12:47:29.000000000 -0700
@@ -12,7 +12,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c.mk
-CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk
# kernel configuration (for LAB)
Index: buildrom-devel/config/platforms/db800.conf
===================================================================
--- buildrom-devel.orig/config/platforms/db800.conf 2008-02-18 12:47:28.000000000 -0700
+++ buildrom-devel/config/platforms/db800.conf 2008-02-18 12:47:29.000000000 -0700
@@ -14,7 +14,7 @@
# Use the same settings as the Norwich platform
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk
-CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk
# kernel configuration (for LAB)
# Use the same settings as the Norwich platform
Index: buildrom-devel/config/platforms/dbe61.conf
===================================================================
--- buildrom-devel.orig/config/platforms/dbe61.conf 2008-02-18 12:47:28.000000000 -0700
+++ buildrom-devel/config/platforms/dbe61.conf 2008-02-18 12:47:29.000000000 -0700
@@ -14,7 +14,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk
-CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk
# kernel configuration (for LAB)
Index: buildrom-devel/config/platforms/msm800sev.conf
===================================================================
--- buildrom-devel.orig/config/platforms/msm800sev.conf 2008-02-18 12:41:59.000000000 -0700
+++ buildrom-devel/config/platforms/msm800sev.conf 2008-02-18 12:47:29.000000000 -0700
@@ -13,7 +13,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev.mk
-CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk
# kernel configuration (for LAB)
Index: buildrom-devel/config/platforms/norwich.conf
===================================================================
--- buildrom-devel.orig/config/platforms/norwich.conf 2008-02-18 12:47:28.000000000 -0700
+++ buildrom-devel/config/platforms/norwich.conf 2008-02-18 12:47:29.000000000 -0700
@@ -13,7 +13,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich.mk
-CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/geodelx.mk
# kernel configuration (for LAB)
Index: buildrom-devel/packages/coreboot-v2/alix1c.mk
===================================================================
--- buildrom-devel.orig/packages/coreboot-v2/alix1c.mk 2008-02-18 12:41:59.000000000 -0700
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,38 +0,0 @@
-# This is the Generic coreboot target
-
-ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(CBV2_TAG),)
-$(error You need to specify a version to pull in your platform config)
-endif
-endif
-
-CBV2_BASE_DIR=svn
-CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
-CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
-CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
-VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-CBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-
-include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-
-$(SOURCE_DIR)/$(CBV2_VSA):
- @ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-
-$(SOURCE_DIR)/$(CBV2_TARBALL):
- @ echo "Fetching the coreboot code..."
- @ mkdir -p $(SOURCE_DIR)/coreboot
- @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
- $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
- > $(CBV2_FETCH_LOG) 2>&1
-
-# Special rule - append the VSA
-
-$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
- @ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-
-coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
-coreboot-clean: generic-coreboot-clean
-coreboot-distclean: generic-coreboot-distclean
Index: buildrom-devel/packages/coreboot-v2/geodelx.mk
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ buildrom-devel/packages/coreboot-v2/geodelx.mk 2008-02-18 12:47:29.000000000 -0700
@@ -0,0 +1,38 @@
+# This target supports all Geode LX platforms
+#
+ifeq ($(CONFIG_PLATFORM),y)
+ifeq ($(CBV2_TAG),)
+$(error You need to specify a version to pull in your platform config)
+endif
+endif
+
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
+VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
+CBV2_VSA=lx_vsa.36k.bin
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
+
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
+
+$(SOURCE_DIR)/$(CBV2_VSA):
+ @ echo "Fetching the VSA blob..."
+ wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
+
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot rev $(CBV2_TAG) code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
+
+# Special rule - append the VSA
+
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
+ @ mkdir -p $(OUTPUT_DIR)
+ @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
+
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Index: buildrom-devel/packages/coreboot-v2/msm800sev.mk
===================================================================
--- buildrom-devel.orig/packages/coreboot-v2/msm800sev.mk 2008-02-18 12:41:59.000000000 -0700
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,38 +0,0 @@
-# This is the Generic coreboot target
-
-ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(CBV2_TAG),)
-$(error You need to specify a version to pull in your platform config)
-endif
-endif
-
-CBV2_BASE_DIR=svn
-CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
-CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
-CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
-VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-CBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-
-include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-
-$(SOURCE_DIR)/$(CBV2_VSA):
- @ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-
-$(SOURCE_DIR)/$(CBV2_TARBALL):
- @ echo "Fetching the coreboot code..."
- @ mkdir -p $(SOURCE_DIR)/coreboot
- @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
- $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
- > $(CBV2_FETCH_LOG) 2>&1
-
-# Special rule - append the VSA
-
-$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
- @ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-
-coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
-coreboot-clean: generic-coreboot-clean
-coreboot-distclean: generic-coreboot-distclean
Index: buildrom-devel/packages/coreboot-v2/norwich.mk
===================================================================
--- buildrom-devel.orig/packages/coreboot-v2/norwich.mk 2008-02-18 12:41:59.000000000 -0700
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,40 +0,0 @@
-# This is the Generic coreboot target
-
-ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(CBV2_TAG),)
-$(error You need to specify a version to pull in your platform config)
-else
-$(warning You specified $(CBV2_TAG) a version to pull in your platform config)
-endif
-endif
-
-CBV2_BASE_DIR=svn
-CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
-CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
-CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
-VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-CBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-
-include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-
-$(SOURCE_DIR)/$(CBV2_VSA):
- @ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-
-$(SOURCE_DIR)/$(CBV2_TARBALL):
- @ echo "Fetching the coreboot rev $(CBV2_TAG) code..."
- @ mkdir -p $(SOURCE_DIR)/coreboot
- @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
- $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
- > $(CBV2_FETCH_LOG) 2>&1
-
-# Special rule - append the VSA
-
-$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
- @ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-
-coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
-coreboot-clean: generic-coreboot-clean
-coreboot-distclean: generic-coreboot-distclean
19 Feb
19 Feb
1:02 p.m.
* Jordan Crouse jordan.crouse@amd.com [080219 16:58]:
[BUILDROM] conslidate the V2 Geode targets
All the Geode targets are the same, so consolidate them into a single target - this will make the forthcoming VSA changes much easier to maintain.
Signed-off-by: Jordan Crouse jordan.crouse@amd.com
Acked-by: Stefan Reinauer stepan@coresystems.de
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info@coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
3:11 p.m.
New subject: conslidate Geode targets
On 19/02/08 17:02 +0100, Stefan Reinauer wrote:
- Jordan Crouse jordan.crouse@amd.com [080219 16:58]:
[BUILDROM] conslidate the V2 Geode targets
All the Geode targets are the same, so consolidate them into a single target - this will make the forthcoming VSA changes much easier to maintain.
Signed-off-by: Jordan Crouse jordan.crouse@amd.com
Acked-by: Stefan Reinauer stepan@coresystems.de
r 120 and r 121 (because my script broke).
-- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info@coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
5948
days inactive
5948
days old
2 comments
2 participants
participants (2)
-
Jordan Crouse -
Stefan Reinauer