coreboot March 2017

coreboot@coreboot.org

79 participants
267 discussions

ASUS KGPE-D16 Automated Test Failure [master]
by Raptor Engineering Automated Coreboot Test Stand 06 Mar '17

06 Mar '17

The ASUS KGPE-D16 fails verification for branch master as of commit da1d802ec447cf61c568698632aff3578ac5531a The following tests failed: BOOT_FAILURE Commits since last successful test: da1d802 soc/intel/skylake: Clean up CPU code e074d62 soc/intel/skylake: Use intel/common/xhci driver c2fd0a2 intelblocks/msr: Move intel x86 MSR definition into common location a554b0c soc/intel/common/block: Add Intel XHCI driver support 9a0245a soc/intel/common: Make infrastructure ready for Intel common code c2c8397 soc/intel/skylake: Clean up XHCI code 79fc33a soc/intel/apollolake: Move XDCI in its own file See attached log for details This message was automatically generated from Raptor Engineering's ASUS KGPE-D16 test stand Want to test on your own equipment? Check out https://www.raptorengineering.com/content/REACTS/intro.html Raptor Engineering also offers coreboot consulting services! Please visit https://www.raptorengineering.com for more information Please contact Timothy Pearson at Raptor Engineering <tpearson(a)raptorengineering.com> regarding any issues stemming from this notification

2 1

kfsn4-dre: Tested RAM configurations?
by Daniel Kulesz 06 Mar '17

06 Mar '17

Hi all, the Wiki page for the kfsn4-dre is somewhat incomplete. It mentions that "K8 processors currently require specific RAM configurations to work correctly. " However, it is not stated which specific RAM configurations have been tested successfully so far. Furthermore, vendor manual and HCL mention that the board supports only RAM modules of maximum 4 GB each. Is this a chipset limitation? If no, is someone running this board successfully with 8GB sticks? I would welcome a HCL list of tested configurations like the one for the KGPE-D16. Cheers, Daniel

2 1

How to build coreboot i386 on macOS Sierra?
by Utku Gültopu 06 Mar '17

06 Mar '17

Hello, I am trying to build coreboot i386 on macOS Sierra but I am getting a compilation error. The error is: Compiling IASL out/src/fw/acpi-dsdt.hex clang: error: no input files make[2]: *** [out/src/fw/acpi-dsdt.hex] Error 1 make[1]: *** [build] Error 2 make: *** [payloads/external/SeaBIOS/seabios/out/bios.bin.elf] Error 2 The full steps to reproduce are as follows: 1. git clone https://review.coreboot.org/coreboot.git 2. cd coreboot 3. git checkout tags/4.5 4. git checkout -b 4.5 5. find . -name '.gitignore' -delete 6. git add . 7. git commit -m ‘Remove .gitignore to track changes’ 8. make crossgcc-i386 9. git add . 10. git commit -m ‘Build i386 toolchain’ 11. make nconfig 1. Mainboard -> Mainboard model -> QEMU x86 i440fx/piix4 (aka emu -M pc) 12. git add . 13. git commit -m ‘Create configuration file’ 14. make Output of `make crossgcc-i386` (the command at step 8) =========================================== user@host:~/src/coreboot$ make crossgcc-i386 Submodule 'arm-trusted-firmware' (https://review.coreboot.org/arm-trusted-firmware.git) registered for path '3rdparty/arm-trusted-firmware' Submodule '3rdparty/blobs' (https://review.coreboot.org/blobs.git) registered for path '3rdparty/blobs' Submodule '3rdparty/chromeec' (https://review.coreboot.org/chrome-ec.git) registered for path '3rdparty/chromeec' Submodule 'vboot' (https://review.coreboot.org/vboot.git) registered for path '3rdparty/vboot' Submodule 'util/nvidia-cbootimage' (https://review.coreboot.org/nvidia-cbootimage.git) registered for path 'util/nvidia/cbootimage' Cloning into '/Users/user/src/coreboot/3rdparty/arm-trusted-firmware'... Skipping submodule '3rdparty/blobs' Cloning into '/Users/user/src/coreboot/3rdparty/chromeec'... Cloning into '/Users/user/src/coreboot/3rdparty/vboot'... Cloning into '/Users/user/src/coreboot/util/nvidia/cbootimage'... Welcome to the coreboot cross toolchain builder v1.43 (August 31st, 2016) Target architecture is now i386-elf warning: Building GCC 5.3 with a different major version (4.2). Bootstrapping (-b) is recommended. Downloading tarballs ... * gmp-6.1.0.tar.xz (downloading from http://ftpmirror.gnu.org/gmp/gmp-6.1.0.tar.xz) ..100% * mpfr-3.1.4.tar.xz (downloading from http://ftpmirror.gnu.org/mpfr/mpfr-3.1.4.tar.xz) ..100% * mpc-1.0.3.tar.gz (downloading from http://ftpmirror.gnu.org/mpc/mpc-1.0.3.tar.gz) ..100% * libelf-0.8.13.tar.gz (downloading from http://www.mr511.de/software/libelf-0.8.13.tar.gz) ..100% * binutils-2.26.1.tar.bz2 (downloading from http://ftpmirror.gnu.org/binutils/binutils-2.26.1.tar.bz2) ..100% * gcc-5.3.0.tar.bz2 (downloading from http://ftpmirror.gnu.org/gcc/gcc-5.3.0/gcc-5.3.0.tar.bz2) ..100% Downloaded tarballs ... ok Unpacking and patching ... * gmp-6.1.0.tar.xz * mpfr-3.1.4.tar.xz * mpc-1.0.3.tar.gz * libelf-0.8.13.tar.gz * binutils-2.26.1.tar.bz2 o binutils-2.26.1_aarch.patch o binutils-2.26.1_no-bfd-doc.patch o binutils-2.26.1_riscv.patch * gcc-5.3.0.tar.bz2 o gcc-5.3.0_elf_biarch.patch o gcc-5.3.0_gnat.patch o gcc-5.3.0_libgcc.patch o gcc-5.3.0_nds32.patch o gcc-5.3.0_riscv.patch Unpacked and patched ... ok Building packages ... Building GMP 6.1.0 ... ok Building MPFR 3.1.4 ... ok Building MPC 1.0.3 ... ok Building LIBELF 0.8.13 ... ok Building BINUTILS 2.26.1 ... ok Building GCC 5.3.0 ... ok Packages built ... ok Cleaning up temporary files... ok You can now run your i386-elf cross GCC toolchain from /Users/user/src/coreboot/util/crossgcc/xgcc. Welcome to the coreboot cross toolchain builder v1.43 (August 31st, 2016) Downloading tarballs ... * acpica-unix2-20160831.tar.gz (downloading from https://acpica.org/sites/acpica/files/acpica-unix2-20160831.tar.gz) ..100% Downloaded tarballs ... ok Unpacking and patching ... * acpica-unix2-20160831.tar.gz o acpica-unix2-20160831_iasl.patch Unpacked and patched ... ok Building packages ... Building IASL 20160831 ... ok Packages built ... ok Cleaning up temporary files... ok You can now run your IASL ACPI compiler toolchain from /Users/user/src/coreboot/util/crossgcc/xgcc. Content of '.config' file (the output of step 11) ================================== # # Automatically generated file; DO NOT EDIT. # coreboot configuration # # # General setup # CONFIG_LOCALVERSION="" CONFIG_CBFS_PREFIX="fallback" CONFIG_COMPILER_GCC=y # CONFIG_COMPILER_LLVM_CLANG is not set # CONFIG_ANY_TOOLCHAIN is not set # CONFIG_CCACHE is not set # CONFIG_FMD_GENPARSER is not set # CONFIG_SCONFIG_GENPARSER is not set # CONFIG_USE_OPTION_TABLE is not set # CONFIG_UNCOMPRESSED_RAMSTAGE is not set CONFIG_COMPRESS_RAMSTAGE=y CONFIG_INCLUDE_CONFIG_FILE=y # CONFIG_NO_XIP_EARLY_STAGES is not set CONFIG_EARLY_CBMEM_INIT=y # CONFIG_EARLY_CBMEM_LIST is not set # CONFIG_COLLECT_TIMESTAMPS is not set # CONFIG_USE_BLOBS is not set # CONFIG_COVERAGE is not set # CONFIG_RELOCATABLE_MODULES is not set # CONFIG_RELOCATABLE_RAMSTAGE is not set # CONFIG_NO_STAGE_CACHE is not set CONFIG_BOOTBLOCK_SIMPLE=y # CONFIG_BOOTBLOCK_NORMAL is not set CONFIG_BOOTBLOCK_CUSTOM=y CONFIG_BOOTBLOCK_SOURCE="bootblock_simple.c" # CONFIG_C_ENVIRONMENT_BOOTBLOCK is not set # CONFIG_UPDATE_IMAGE is not set # CONFIG_GENERIC_GPIO_LIB is not set # CONFIG_BOARD_ID_AUTO is not set # CONFIG_BOARD_ID_MANUAL is not set # CONFIG_RAM_CODE_SUPPORT is not set # CONFIG_BOOTSPLASH_IMAGE is not set # # Mainboard # # CONFIG_VENDOR_A_TREND is not set # CONFIG_VENDOR_AAEON is not set # CONFIG_VENDOR_ABIT is not set # CONFIG_VENDOR_ADI is not set # CONFIG_VENDOR_ADLINK is not set # CONFIG_VENDOR_ADVANSUS is not set # CONFIG_VENDOR_AMD is not set # CONFIG_VENDOR_AOPEN is not set # CONFIG_VENDOR_APPLE is not set # CONFIG_VENDOR_ARTECGROUP is not set # CONFIG_VENDOR_ASROCK is not set # CONFIG_VENDOR_ASUS is not set # CONFIG_VENDOR_AVALUE is not set # CONFIG_VENDOR_AZZA is not set # CONFIG_VENDOR_BACHMANN is not set # CONFIG_VENDOR_BAP is not set # CONFIG_VENDOR_BCOM is not set # CONFIG_VENDOR_BIFFEROS is not set # CONFIG_VENDOR_BIOSTAR is not set # CONFIG_VENDOR_BROADCOM is not set # CONFIG_VENDOR_COMPAQ is not set # CONFIG_VENDOR_CUBIETECH is not set # CONFIG_VENDOR_DIGITALLOGIC is not set # CONFIG_VENDOR_DMP is not set # CONFIG_VENDOR_ECS is not set # CONFIG_VENDOR_ELMEX is not set CONFIG_VENDOR_EMULATION=y # CONFIG_VENDOR_ESD is not set # CONFIG_VENDOR_GETAC is not set # CONFIG_VENDOR_GIGABYTE is not set # CONFIG_VENDOR_GIZMOSPHERE is not set # CONFIG_VENDOR_GOOGLE is not set # CONFIG_VENDOR_HP is not set # CONFIG_VENDOR_IBASE is not set # CONFIG_VENDOR_IEI is not set # CONFIG_VENDOR_INTEL is not set # CONFIG_VENDOR_IWAVE is not set # CONFIG_VENDOR_IWILL is not set # CONFIG_VENDOR_JETWAY is not set # CONFIG_VENDOR_KONTRON is not set # CONFIG_VENDOR_LANNER is not set # CONFIG_VENDOR_LENOVO is not set # CONFIG_VENDOR_LINUTOP is not set # CONFIG_VENDOR_LIPPERT is not set # CONFIG_VENDOR_MITAC is not set # CONFIG_VENDOR_MSI is not set # CONFIG_VENDOR_NEC is not set # CONFIG_VENDOR_NOKIA is not set # CONFIG_VENDOR_NVIDIA is not set # CONFIG_VENDOR_PACKARDBELL is not set # CONFIG_VENDOR_PCENGINES is not set # CONFIG_VENDOR_PURISM is not set # CONFIG_VENDOR_RCA is not set # CONFIG_VENDOR_RODA is not set # CONFIG_VENDOR_SAMSUNG is not set # CONFIG_VENDOR_SIEMENS is not set # CONFIG_VENDOR_SOYO is not set # CONFIG_VENDOR_SUNW is not set # CONFIG_VENDOR_SUPERMICRO is not set # CONFIG_VENDOR_TECHNEXION is not set # CONFIG_VENDOR_THOMSON is not set # CONFIG_VENDOR_TI is not set # CONFIG_VENDOR_TRAVERSE is not set # CONFIG_VENDOR_TYAN is not set # CONFIG_VENDOR_VIA is not set # CONFIG_VENDOR_WINENT is not set # CONFIG_VENDOR_WYSE is not set CONFIG_BOARD_SPECIFIC_OPTIONS=y CONFIG_MAINBOARD_DIR="emulation/qemu-i440fx" CONFIG_MAINBOARD_PART_NUMBER="QEMU x86 i440fx/piix4" CONFIG_IRQ_SLOT_COUNT=6 CONFIG_MAINBOARD_VENDOR="Emulation" CONFIG_MAX_CPUS=1 CONFIG_CACHE_ROM_SIZE_OVERRIDE=0x0 CONFIG_CBFS_SIZE=0x40000 CONFIG_UART_FOR_CONSOLE=0 CONFIG_PAYLOAD_CONFIGFILE="" # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set # CONFIG_VGA_BIOS is not set CONFIG_MAINBOARD_SERIAL_NUMBER="123456789" CONFIG_DCACHE_RAM_BASE=0xd0000 CONFIG_DCACHE_RAM_SIZE=0x10000 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Emulation" CONFIG_POST_IO=y CONFIG_MAX_REBOOT_CNT=3 CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT=y CONFIG_ID_SECTION_OFFSET=0x80 # CONFIG_BOARD_EMULATION_QEMU_ARMV7 is not set CONFIG_BOARD_EMULATION_QEMU_X86_I440FX=y # CONFIG_BOARD_EMULATION_QEMU_POWER8 is not set # CONFIG_BOARD_EMULATION_QEMU_X86_Q35 is not set # CONFIG_BOARD_EMULATION_QEMU_UCB_RISCV is not set # CONFIG_BOARD_EMULATION_SPIKE_UCB_RISCV is not set CONFIG_BOARD_EMULATION_QEMU_X86=y CONFIG_POST_DEVICE=y # CONFIG_DRIVERS_PS2_KEYBOARD is not set CONFIG_DEVICETREE="devicetree.cb" CONFIG_TTYS0_LCS=3 # CONFIG_CONSOLE_POST is not set CONFIG_DRIVERS_UART_8250IO=y CONFIG_SEABIOS_PS2_TIMEOUT=0 CONFIG_CPU_ADDR_BITS=36 CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 CONFIG_MAINBOARD_VERSION="1.0" # CONFIG_NO_POST is not set CONFIG_BOARD_ROMSIZE_KB_256=y # CONFIG_COREBOOT_ROMSIZE_KB_64 is not set # CONFIG_COREBOOT_ROMSIZE_KB_128 is not set CONFIG_COREBOOT_ROMSIZE_KB_256=y # CONFIG_COREBOOT_ROMSIZE_KB_512 is not set # CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set # CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set # CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set # CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set # CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set # CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set # CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set # CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set CONFIG_COREBOOT_ROMSIZE_KB=256 CONFIG_ROM_SIZE=0x40000 CONFIG_FMDFILE="" # CONFIG_MAINBOARD_HAS_TPM2 is not set # CONFIG_SYSTEM_TYPE_LAPTOP is not set # CONFIG_CBFS_AUTOGEN_ATTRIBUTES is not set # # Chipset # # # SoC # # CONFIG_SOC_BROADCOM_CYGNUS is not set CONFIG_C_ENV_BOOTBLOCK_SIZE=0x10000 CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y CONFIG_ROMSTAGE_ADDR=0x2000000 CONFIG_VERSTAGE_ADDR=0x2000000 CONFIG_BOOTBLOCK_SOUTHBRIDGE_INIT="southbridge/intel/i82371eb/bootblock.c" CONFIG_TTYS0_BASE=0x3f8 CONFIG_RAMTOP=0x200000 CONFIG_HEAP_SIZE=0x4000 CONFIG_CONSOLE_CBMEM=y CONFIG_UART_PCI_ADDR=0x0 # CONFIG_SOC_MARVELL_ARMADA38X is not set # CONFIG_SOC_MARVELL_BG4CD is not set # CONFIG_SOC_MARVELL_MVMAP2315 is not set CONFIG_TTYS0_BAUD=115200 # CONFIG_SOC_MEDIATEK_MT8173 is not set # CONFIG_SOC_NVIDIA_TEGRA124 is not set # CONFIG_SOC_NVIDIA_TEGRA210 is not set # CONFIG_SOC_QC_IPQ40XX is not set # CONFIG_SOC_QC_IPQ806X is not set # CONFIG_SOC_ROCKCHIP_RK3288 is not set # CONFIG_SOC_ROCKCHIP_RK3399 is not set # CONFIG_CPU_SAMSUNG_EXYNOS5250 is not set # CONFIG_CPU_SAMSUNG_EXYNOS5420 is not set # CONFIG_SOC_UCB_RISCV is not set # # CPU # # CONFIG_CPU_ALLWINNER_A10 is not set CONFIG_XIP_ROM_SIZE=0x10000 CONFIG_NUM_IPI_STARTS=2 # CONFIG_CPU_AMD_AGESA is not set # CONFIG_CPU_AMD_PI is not set # CONFIG_CPU_ARMLTD_CORTEX_A9 is not set # CONFIG_SSE2 is not set # CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE is not set # CONFIG_CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED is not set CONFIG_CPU_QEMU_X86=y # CONFIG_CPU_TI_AM335X is not set # CONFIG_PARALLEL_CPU_INIT is not set # CONFIG_PARALLEL_MP is not set CONFIG_UDELAY_IO=y # CONFIG_UDELAY_LAPIC is not set # CONFIG_UDELAY_TSC is not set # CONFIG_UDELAY_TIMER2 is not set # CONFIG_TSC_SYNC_LFENCE is not set # CONFIG_TSC_SYNC_MFENCE is not set # CONFIG_NO_FIXED_XIP_ROM_SIZE is not set CONFIG_LOGICAL_CPUS=y # CONFIG_SMM_TSEG is not set # CONFIG_SMM_LAPIC_REMAP_MITIGATION is not set # CONFIG_SERIALIZED_SMM_INITIALIZATION is not set # CONFIG_X86_AMD_FIXED_MTRRS is not set # CONFIG_PLATFORM_USES_FSP1_0 is not set # CONFIG_MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADING is not set # CONFIG_SOC_SETS_MSRS is not set CONFIG_CACHE_AS_RAM=y CONFIG_SMP=y CONFIG_AP_SIPI_VECTOR=0xfffff000 # CONFIG_SUPPORT_CPU_UCODE_IN_CBFS is not set # CONFIG_USES_MICROCODE_HEADER_FILES is not set # CONFIG_CPU_MICROCODE_CBFS_GENERATE is not set # CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set CONFIG_CPU_MICROCODE_CBFS_NONE=y # # Northbridge # # CONFIG_NORTHBRIDGE_AMD_AGESA is not set # CONFIG_AMD_NB_CIMX is not set # CONFIG_NORTHBRIDGE_AMD_CIMX_RD890 is not set CONFIG_VIDEO_MB=0 # CONFIG_NORTHBRIDGE_AMD_PI is not set CONFIG_RAMBASE=0x100000 # CONFIG_NORTHBRIDGE_INTEL_COMMON_MRC_CACHE is not set CONFIG_HPET_ADDRESS=0xfed00000 CONFIG_MAX_PIRQ_LINKS=4 # # Southbridge # # CONFIG_AMD_SB_CIMX is not set # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800 is not set # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 is not set # CONFIG_SOUTHBRIDGE_INTEL_COMMON is not set # CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO is not set CONFIG_SOUTHBRIDGE_INTEL_I82371EB=y # # Super I/O # # CONFIG_SUPERIO_NUVOTON_NCT6776_COM_A is not set # # Embedded Controllers # CONFIG_VBOOT_VBNV_OFFSET=0x26 # CONFIG_VBOOT_VBNV_CMOS is not set # CONFIG_VBOOT_VBNV_EC is not set # CONFIG_MAINBOARD_HAS_CHROMEOS is not set # CONFIG_UEFI_2_4_BINDING is not set # CONFIG_UDK_2015_BINDING is not set # CONFIG_USE_SIEMENS_HWILIB is not set # CONFIG_ARCH_ARM is not set # CONFIG_ARCH_BOOTBLOCK_ARM is not set # CONFIG_ARCH_VERSTAGE_ARM is not set # CONFIG_ARCH_ROMSTAGE_ARM is not set # CONFIG_ARCH_RAMSTAGE_ARM is not set # CONFIG_ARCH_BOOTBLOCK_ARMV4 is not set # CONFIG_ARCH_VERSTAGE_ARMV4 is not set # CONFIG_ARCH_ROMSTAGE_ARMV4 is not set # CONFIG_ARCH_RAMSTAGE_ARMV4 is not set # CONFIG_ARCH_BOOTBLOCK_ARMV7 is not set # CONFIG_ARCH_VERSTAGE_ARMV7 is not set # CONFIG_ARCH_ROMSTAGE_ARMV7 is not set # CONFIG_ARCH_RAMSTAGE_ARMV7 is not set # CONFIG_ARCH_BOOTBLOCK_ARMV7_M is not set # CONFIG_ARCH_VERSTAGE_ARMV7_M is not set # CONFIG_ARCH_BOOTBLOCK_ARMV7_R is not set # CONFIG_ARCH_VERSTAGE_ARMV7_R is not set # CONFIG_ARCH_ROMSTAGE_ARMV7_R is not set # CONFIG_ARCH_RAMSTAGE_ARMV7_R is not set # CONFIG_ARM_LPAE is not set # CONFIG_ARCH_ARM64 is not set # CONFIG_ARCH_BOOTBLOCK_ARM64 is not set # CONFIG_ARCH_VERSTAGE_ARM64 is not set # CONFIG_ARCH_ROMSTAGE_ARM64 is not set # CONFIG_ARCH_RAMSTAGE_ARM64 is not set # CONFIG_ARCH_BOOTBLOCK_ARMV8_64 is not set # CONFIG_ARCH_VERSTAGE_ARMV8_64 is not set # CONFIG_ARCH_ROMSTAGE_ARMV8_64 is not set # CONFIG_ARCH_RAMSTAGE_ARMV8_64 is not set # CONFIG_ARM64_A53_ERRATUM_843419 is not set # CONFIG_ARCH_MIPS is not set # CONFIG_ARCH_BOOTBLOCK_MIPS is not set # CONFIG_ARCH_VERSTAGE_MIPS is not set # CONFIG_ARCH_ROMSTAGE_MIPS is not set # CONFIG_ARCH_RAMSTAGE_MIPS is not set # CONFIG_ARCH_POWER8 is not set # CONFIG_ARCH_BOOTBLOCK_POWER8 is not set # CONFIG_ARCH_VERSTAGE_POWER8 is not set # CONFIG_ARCH_ROMSTAGE_POWER8 is not set # CONFIG_ARCH_RAMSTAGE_POWER8 is not set # CONFIG_ARCH_RISCV is not set # CONFIG_ARCH_BOOTBLOCK_RISCV is not set # CONFIG_ARCH_VERSTAGE_RISCV is not set # CONFIG_ARCH_ROMSTAGE_RISCV is not set # CONFIG_ARCH_RAMSTAGE_RISCV is not set CONFIG_ARCH_X86=y CONFIG_ARCH_BOOTBLOCK_X86_32=y CONFIG_ARCH_VERSTAGE_X86_32=y CONFIG_ARCH_ROMSTAGE_X86_32=y CONFIG_ARCH_RAMSTAGE_X86_32=y # CONFIG_ARCH_BOOTBLOCK_X86_64 is not set # CONFIG_ARCH_VERSTAGE_X86_64 is not set # CONFIG_ARCH_ROMSTAGE_X86_64 is not set # CONFIG_ARCH_RAMSTAGE_X86_64 is not set # CONFIG_USE_MARCH_586 is not set # CONFIG_AP_IN_SIPI_WAIT is not set # CONFIG_SIPI_VECTOR_IN_ROM is not set # CONFIG_ROMCC is not set # CONFIG_LATE_CBMEM_INIT is not set CONFIG_PC80_SYSTEM=y # CONFIG_BOOTBLOCK_DEBUG_SPINLOOP is not set # CONFIG_BOOTBLOCK_SAVE_BIST_AND_TIMESTAMP is not set CONFIG_HAVE_CMOS_DEFAULT=y CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default" CONFIG_IOAPIC_INTERRUPTS_ON_FSB=y # CONFIG_IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS is not set # CONFIG_POSTCAR_STAGE is not set # CONFIG_VERSTAGE_DEBUG_SPINLOOP is not set # CONFIG_ROMSTAGE_DEBUG_SPINLOOP is not set # # Devices # CONFIG_MAINBOARD_HAS_NATIVE_VGA_INIT=y CONFIG_NATIVE_VGA_INIT_USE_EDID=y CONFIG_MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG=y # CONFIG_ON_DEVICE_ROM_LOAD is not set # CONFIG_MULTIPLE_VGA_ADAPTERS is not set # CONFIG_SMBUS_HAS_AUX_CHANNELS is not set # CONFIG_SPD_CACHE is not set CONFIG_PCI=y # CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not set CONFIG_PCIX_PLUGIN_SUPPORT=y CONFIG_PCIEXP_PLUGIN_SUPPORT=y CONFIG_CARDBUS_PLUGIN_SUPPORT=y # CONFIG_AZALIA_PLUGIN_SUPPORT is not set # CONFIG_PCIEXP_COMMON_CLOCK is not set # CONFIG_PCIEXP_ASPM is not set # CONFIG_PCIEXP_CLK_PM is not set # CONFIG_EARLY_PCI_BRIDGE is not set CONFIG_SUBSYSTEM_VENDOR_ID=0x0000 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000 # CONFIG_SOFTWARE_I2C is not set # # Display # # CONFIG_FRAMEBUFFER_KEEP_VESA_MODE is not set # # Generic Drivers # # CONFIG_DRIVERS_AS3722_RTC is not set # CONFIG_GIC is not set # CONFIG_IPMI_KCS is not set # CONFIG_DRIVERS_LENOVO_WACOM is not set # CONFIG_DRIVERS_LENOVO_HYBRID_GRAPHICS is not set # CONFIG_REALTEK_8168_RESET is not set # CONFIG_SPI_FLASH is not set # CONFIG_HAVE_SPI_CONSOLE_SUPPORT is not set CONFIG_DRIVERS_UART=y # CONFIG_DRIVERS_UART_8250IO_SKIP_INIT is not set # CONFIG_NO_UART_ON_SUPERIO is not set # CONFIG_UART_OVERRIDE_INPUT_CLOCK_DIVIDER is not set # CONFIG_UART_OVERRIDE_REFCLK is not set # CONFIG_DRIVERS_UART_8250MEM is not set # CONFIG_DRIVERS_UART_8250MEM_32 is not set # CONFIG_HAVE_UART_SPECIAL is not set # CONFIG_DRIVERS_UART_OXPCIE is not set # CONFIG_DRIVERS_UART_PL011 is not set # CONFIG_UART_USE_REFCLK_AS_INPUT_CLOCK is not set # CONFIG_HAVE_USBDEBUG is not set # CONFIG_HAVE_USBDEBUG_OPTIONS is not set CONFIG_DRIVERS_EMULATION_QEMU_BOCHS=y # CONFIG_SMBIOS_PROVIDED_BY_MOBO is not set # CONFIG_DRIVERS_I2C_PCF8523 is not set # CONFIG_DRIVERS_I2C_RTD2132 is not set # CONFIG_MAINBOARD_HAS_I2C_TPM_CR50 is not set # CONFIG_DRIVER_I2C_TPM_ACPI is not set # CONFIG_INTEL_DP is not set # CONFIG_INTEL_DDI is not set # CONFIG_INTEL_EDID is not set # CONFIG_INTEL_INT15 is not set # CONFIG_INTEL_GMA_ACPI is not set # CONFIG_DRIVER_INTEL_I210 is not set CONFIG_DRIVERS_INTEL_WIFI=y # CONFIG_DRIVER_MAXIM_MAX77686 is not set # CONFIG_DRIVER_PARADE_PS8625 is not set # CONFIG_DRIVER_PARADE_PS8640 is not set CONFIG_DRIVERS_MC146818=y # CONFIG_MAINBOARD_HAS_LPC_TPM is not set # CONFIG_DRIVERS_RICOH_RCE822 is not set # CONFIG_DRIVER_SIEMENS_NC_FPGA is not set # CONFIG_DRIVERS_SIL_3114 is not set # CONFIG_DRIVER_TI_TPS65090 is not set # CONFIG_DRIVERS_TI_TPS65913 is not set # CONFIG_DRIVERS_TI_TPS65913_RTC is not set # CONFIG_DRIVER_XPOWERS_AXP209 is not set # CONFIG_ACPI_SATA_GENERATOR is not set # CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES is not set # CONFIG_BOOT_DEVICE_NOT_SPI_FLASH is not set CONFIG_BOOT_DEVICE_SPI_FLASH=y CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y # CONFIG_BOOT_DEVICE_SUPPORTS_WRITES is not set # CONFIG_RTC is not set # CONFIG_TPM is not set CONFIG_STACK_SIZE=0x1000 # CONFIG_MMCONF_SUPPORT_DEFAULT is not set # CONFIG_MMCONF_SUPPORT is not set # # Console # CONFIG_SQUELCH_EARLY_SMP=y CONFIG_CONSOLE_SERIAL=y # # I/O mapped, 8250-compatible # # # Serial port base address = 0x3f8 # # CONFIG_CONSOLE_SERIAL_921600 is not set # CONFIG_CONSOLE_SERIAL_460800 is not set # CONFIG_CONSOLE_SERIAL_230400 is not set CONFIG_CONSOLE_SERIAL_115200=y # CONFIG_CONSOLE_SERIAL_57600 is not set # CONFIG_CONSOLE_SERIAL_38400 is not set # CONFIG_CONSOLE_SERIAL_19200 is not set # CONFIG_CONSOLE_SERIAL_9600 is not set # CONFIG_SPKMODEM is not set # CONFIG_CONSOLE_NE2K is not set CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_CONSOLE_QEMU_DEBUGCON=y CONFIG_CONSOLE_QEMU_DEBUGCON_PORT=0x402 CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8=y # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set # CONFIG_CMOS_POST is not set CONFIG_POST_DEVICE_NONE=y # CONFIG_POST_DEVICE_LPC is not set # CONFIG_POST_DEVICE_PCI_PCIE is not set CONFIG_POST_IO_PORT=0x80 # CONFIG_NO_EARLY_BOOTBLOCK_POSTCODES is not set # CONFIG_HAVE_ACPI_RESUME is not set # CONFIG_HAVE_HARD_RESET is not set # CONFIG_HAVE_ROMSTAGE_CONSOLE_SPINLOCK is not set # CONFIG_HAVE_ROMSTAGE_NVRAM_CBFS_SPINLOCK is not set # CONFIG_HAVE_ROMSTAGE_MICROCODE_CBFS_SPINLOCK is not set # CONFIG_HAVE_MONOTONIC_TIMER is not set CONFIG_HAVE_OPTION_TABLE=y # CONFIG_PIRQ_ROUTE is not set # CONFIG_HAVE_SMI_HANDLER is not set # CONFIG_PCI_IO_CFG_EXT is not set # CONFIG_IOAPIC is not set # CONFIG_USE_WATCHDOG_ON_BOOT is not set CONFIG_VGA=y # CONFIG_GFXUMA is not set CONFIG_HAVE_ACPI_TABLES=y CONFIG_HAVE_PIRQ_TABLE=y # CONFIG_COMMON_FADT is not set # CONFIG_ACPI_NHLT is not set # # System tables # # CONFIG_GENERATE_MP_TABLE is not set CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_SMBIOS_TABLES=y CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="QEMU x86 i440fx/piix4" # # Payload # # CONFIG_PAYLOAD_NONE is not set # CONFIG_PAYLOAD_ELF is not set # CONFIG_PAYLOAD_BAYOU is not set # CONFIG_PAYLOAD_FILO is not set # CONFIG_PAYLOAD_GRUB2 is not set CONFIG_PAYLOAD_SEABIOS=y # CONFIG_PAYLOAD_UBOOT is not set # CONFIG_PAYLOAD_LINUX is not set # CONFIG_PAYLOAD_TIANOCORE is not set CONFIG_PAYLOAD_FILE="payloads/external/SeaBIOS/seabios/out/bios.bin.elf" CONFIG_SEABIOS_STABLE=y # CONFIG_SEABIOS_MASTER is not set # CONFIG_SEABIOS_REVISION is not set # CONFIG_SEABIOS_THREAD_OPTIONROMS is not set # CONFIG_SEABIOS_VGA_COREBOOT is not set CONFIG_SEABIOS_BOOTORDER_FILE="" CONFIG_PAYLOAD_OPTIONS="" # CONFIG_PXE is not set CONFIG_COMPRESSED_PAYLOAD_LZMA=y # CONFIG_PAYLOAD_IS_FLAT_BINARY is not set # # Secondary Payloads # # CONFIG_COREINFO_SECONDARY_PAYLOAD is not set # CONFIG_MEMTEST_SECONDARY_PAYLOAD is not set # CONFIG_NVRAMCUI_SECONDARY_PAYLOAD is not set # CONFIG_TINT_SECONDARY_PAYLOAD is not set # # Debugging # # CONFIG_GDB_STUB is not set # CONFIG_FATAL_ASSERTS is not set # CONFIG_DEBUG_CBFS is not set # CONFIG_HAVE_DEBUG_RAM_SETUP is not set # CONFIG_HAVE_DEBUG_CAR is not set # CONFIG_DEBUG_PIRQ is not set # CONFIG_HAVE_DEBUG_SMBUS is not set # CONFIG_DEBUG_MALLOC is not set # CONFIG_DEBUG_ACPI is not set # CONFIG_TRACE is not set # CONFIG_DEBUG_BOOT_STATE is not set # CONFIG_ENABLE_APIC_EXT_ID is not set CONFIG_WARNINGS_ARE_ERRORS=y # CONFIG_POWER_BUTTON_DEFAULT_ENABLE is not set # CONFIG_POWER_BUTTON_DEFAULT_DISABLE is not set # CONFIG_POWER_BUTTON_FORCE_ENABLE is not set # CONFIG_POWER_BUTTON_FORCE_DISABLE is not set # CONFIG_POWER_BUTTON_IS_OPTIONAL is not set # CONFIG_REG_SCRIPT is not set # CONFIG_CREATE_BOARD_CHECKLIST is not set # CONFIG_MAKE_CHECKLIST_PUBLIC is not set Output of `make` (the command at step 14) ================================= user@host:~/src/coreboot$ make Skipping submodule '3rdparty/blobs' /Users/user/src/coreboot/util/kconfig/conf.c:79:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("aborted!\n\n")); ^~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:79:10: note: treat the string as an argument to avoid this printf(_("aborted!\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:80:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("Console input/output is redirected. ")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:80:10: note: treat the string as an argument to avoid this printf(_("Console input/output is redirected. ")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:81:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("Run 'make oldconfig' to update configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:81:10: note: treat the string as an argument to avoid this printf(_("Run 'make oldconfig' to update configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:91:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("(NEW) ")); ^~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:91:10: note: treat the string as an argument to avoid this printf(_("(NEW) ")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:292:12: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_(" (NEW)")); ^~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:292:12: note: treat the string as an argument to avoid this printf(_(" (NEW)")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:440:13: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("*\n* Restart config...\n*\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:440:13: note: treat the string as an argument to avoid this printf(_("*\n* Restart config...\n*\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:639:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] _("\n*** The configuration requires explicit update.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:639:6: note: treat the string as an argument to avoid this _("\n*** The configuration requires explicit update.\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:699:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:699:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:703:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:703:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/util/kconfig/conf.c:714:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/util/kconfig/conf.c:714:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/util/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ 10 warnings generated. # # configuration written to /Users/user/src/coreboot/.config # HOSTCC util/sconfig/lex.yy.o HOSTCC util/sconfig/sconfig.tab.o HOSTCC util/sconfig/main.o HOSTCC util/sconfig/sconfig (link) SCONFIG mainboard/emulation/qemu-i440fx/devicetree.cb HOSTCC nvramtool/cli/nvramtool.o HOSTCC nvramtool/cli/opts.o HOSTCC nvramtool/cmos_lowlevel.o HOSTCC nvramtool/cmos_ops.o HOSTCC nvramtool/common.o HOSTCC nvramtool/compute_ip_checksum.o HOSTCC nvramtool/hexdump.o HOSTCC nvramtool/input_file.o HOSTCC nvramtool/layout.o HOSTCC nvramtool/accessors/layout-common.o HOSTCC nvramtool/accessors/layout-text.o HOSTCC nvramtool/accessors/layout-bin.o HOSTCC nvramtool/lbtable.o HOSTCC nvramtool/reg_expr.o HOSTCC nvramtool/cbfs.o HOSTCC nvramtool/accessors/cmos-mem.o HOSTCC nvramtool/nvramtool (link) OPTION option_table.h CC bootblock/mainboard/emulation/qemu-i440fx/static.o CC bootblock/arch/x86/boot.o GEN generated/bootblock.ld CP bootblock/arch/x86/bootblock.ld HOSTCC util/romcc/romcc (this may take a while) ROMCC generated/bootblock.inc CC bootblock/arch/x86/bootblock_romcc.o CC bootblock/arch/x86/cpu_common.o GEN build.h CC bootblock/arch/x86/id.o CC bootblock/arch/x86/memcpy.o CC bootblock/arch/x86/memset.o CC bootblock/arch/x86/mmap_boot.o CC bootblock/arch/x86/walkcbfs.o CC bootblock/commonlib/cbfs.o CC bootblock/commonlib/lz4_wrapper.o CC bootblock/commonlib/mem_pool.o CC bootblock/commonlib/region.o CC bootblock/console/die.o CC bootblock/console/post.o CC bootblock/cpu/x86/lapic/boot_cpu.o CC bootblock/cpu/x86/mtrr/earlymtrr.o CC bootblock/device/device_simple.o CC bootblock/device/i2c.o CC bootblock/drivers/uart/uart8250io.o CC bootblock/drivers/uart/util.o CC bootblock/lib/boot_device.o CC bootblock/lib/bootmode.o HOSTCC cbfstool/fmaptool.o HOSTCC cbfstool/cbfs_sections.o HOSTCC cbfstool/fmap_from_fmd.o HOSTCC cbfstool/fmd.o HOSTCC cbfstool/fmd_parser.o HOSTCC cbfstool/fmd_scanner.o HOSTCC cbfstool/fmap.o HOSTCC cbfstool/kv_pair.o HOSTCC cbfstool/valstr.o HOSTCC cbfstool/fmaptool (link) FMAP build/util/cbfstool/fmaptool -h build/fmap_config.h build/fmap.fmd build/fmap.fmap SUCCESS: Wrote 182 bytes to file 'build/fmap.fmap' (and generated header) The sections containing CBFSes are: COREBOOT CC bootblock/lib/cbfs.o CC bootblock/lib/cbmem_console.o CC bootblock/lib/delay.o CC bootblock/lib/fmap.o CC bootblock/lib/gcc.o CC bootblock/lib/halt.o CC bootblock/lib/hexdump.o CC bootblock/lib/libgcc.o CC bootblock/lib/memchr.o CC bootblock/lib/memcmp.o CC bootblock/lib/prog_loaders.o CC bootblock/lib/prog_ops.o CC bootblock/lib/version.o CC bootblock/vboot/bootmode.o LINK cbfs/fallback/bootblock.debug OBJCOPY cbfs/fallback/bootblock.elf OBJCOPY bootblock.raw.bin CC romstage/mainboard/emulation/qemu-i440fx/static.o GEN generated/assembly.inc CC romstage/arch/x86/assembly_entry.o CC romstage/arch/x86/boot.o CC romstage/arch/x86/cbfs_and_run.o CC romstage/arch/x86/cbmem.o CC romstage/arch/x86/cpu_common.o CC romstage/arch/x86/memcpy.o CP romstage/arch/x86/memlayout.ld CC romstage/arch/x86/memmove.o CC romstage/arch/x86/memset.o CC romstage/arch/x86/mmap_boot.o CC romstage/arch/x86/postcar_loader.o CC romstage/commonlib/cbfs.o CC romstage/commonlib/lz4_wrapper.o CC romstage/commonlib/mem_pool.o CC romstage/commonlib/region.o CC romstage/console/console.o CC romstage/console/die.o CC romstage/console/init.o CC romstage/console/post.o CC romstage/console/printk.o CC romstage/console/vtxprintf.o CC romstage/cpu/x86/car.o CC romstage/cpu/x86/lapic/boot_cpu.o CC romstage/cpu/x86/mtrr/earlymtrr.o CC romstage/device/device_simple.o CC romstage/device/i2c.o CC romstage/device/pci_early.o CC romstage/drivers/emulation/qemu/qemu_debugcon.o CC romstage/drivers/pc80/pc/udelay_io.o CC romstage/drivers/pc80/rtc/mc146818rtc.o CC romstage/drivers/pc80/rtc/mc146818rtc_early.o CC romstage/drivers/uart/uart8250io.o CC romstage/drivers/uart/util.o CC romstage/lib/boot_device.o CC romstage/lib/bootmode.o CC romstage/lib/cbfs.o CC romstage/lib/cbmem_common.o CC romstage/lib/cbmem_console.o CC romstage/lib/compute_ip_checksum.o CC romstage/lib/delay.o CC romstage/lib/fmap.o CC romstage/lib/gcc.o CC romstage/lib/halt.o CC romstage/lib/hexdump.o CC romstage/lib/imd.o CC romstage/lib/imd_cbmem.o CC romstage/lib/libgcc.o CC romstage/lib/lzma.o CC romstage/lib/lzmadecode.o CC romstage/lib/memchr.o CC romstage/lib/memcmp.o CC romstage/lib/memrange.o CC romstage/lib/prog_loaders.o CC romstage/lib/prog_ops.o CP romstage/lib/program.ld CC romstage/lib/ramtest.o CC romstage/lib/romstage_stack.o CC romstage/lib/stack.o CC romstage/lib/version.o CC romstage/mainboard/emulation/qemu-i440fx/romstage.o CC romstage/southbridge/intel/i82371eb/early_pm.o CC romstage/southbridge/intel/i82371eb/early_smbus.o CC romstage/vboot/bootmode.o LINK cbfs/fallback/romstage.debug OBJCOPY cbfs/fallback/romstage.elf CC ramstage/vboot/bootmode.o CC ramstage/superio/common/conf_mode.o CC ramstage/southbridge/intel/i82371eb/acpi_tables.o CC ramstage/southbridge/intel/i82371eb/fadt.o CC ramstage/southbridge/intel/i82371eb/i82371eb.o CC ramstage/southbridge/intel/i82371eb/ide.o CC ramstage/southbridge/intel/i82371eb/isa.o CC ramstage/southbridge/intel/i82371eb/reset.o CC ramstage/southbridge/intel/i82371eb/smbus.o CC ramstage/southbridge/intel/i82371eb/usb.o CC ramstage/mainboard/emulation/qemu-i440fx/static.o CC ramstage/mainboard/emulation/qemu-i440fx/acpi_tables.o CC ramstage/mainboard/emulation/qemu-i440fx/fw_cfg.o CC ramstage/mainboard/emulation/qemu-i440fx/irq_tables.o CC ramstage/mainboard/emulation/qemu-i440fx/mainboard.o CC ramstage/mainboard/emulation/qemu-i440fx/northbridge.o CC ramstage/lib/b64_decode.o CC ramstage/lib/boot_device.o CC ramstage/lib/bootmem.o CC ramstage/lib/bootmode.o CC ramstage/lib/cbfs.o CC ramstage/lib/cbmem_common.o CC ramstage/lib/cbmem_console.o CC ramstage/lib/compute_ip_checksum.o CC ramstage/lib/coreboot_table.o CC ramstage/lib/delay.o CC ramstage/lib/edid.o CC ramstage/lib/fallback_boot.o CC ramstage/lib/fmap.o CC ramstage/lib/gcc.o CC ramstage/lib/halt.o CC ramstage/lib/hardwaremain.o CC ramstage/lib/hexdump.o CC ramstage/lib/hexstrtobin.o CC ramstage/lib/imd.o CC ramstage/lib/imd_cbmem.o CC ramstage/lib/lzma.o CC ramstage/lib/lzmadecode.o CC ramstage/lib/malloc.o CC ramstage/lib/memchr.o CC ramstage/lib/memcmp.o CC ramstage/lib/memrange.o CC ramstage/lib/prog_loaders.o CC ramstage/lib/prog_ops.o CC ramstage/lib/romstage_stack.o CC ramstage/lib/rtc.o CC ramstage/lib/selfboot.o CC ramstage/lib/stack.o CC ramstage/lib/version.o CC ramstage/lib/wrdd.o CC ramstage/drivers/uart/uart8250io.o CC ramstage/drivers/uart/util.o CC ramstage/drivers/pc80/vga/vga.o CC ramstage/drivers/pc80/vga/vga_font_8x16.o CC ramstage/drivers/pc80/vga/vga_io.o CC ramstage/drivers/pc80/vga/vga_palette.o CC ramstage/drivers/pc80/rtc/mc146818rtc.o CC ramstage/drivers/pc80/rtc/mc146818rtc_early.o CC ramstage/drivers/pc80/pc/i8254.o CC ramstage/drivers/pc80/pc/i8259.o CC ramstage/drivers/pc80/pc/isa-dma.o CC ramstage/drivers/pc80/pc/keyboard.o CC ramstage/drivers/pc80/pc/udelay_io.o CC ramstage/drivers/intel/wifi/wifi.o CC ramstage/drivers/emulation/qemu/bochs.o CC ramstage/drivers/emulation/qemu/cirrus.o CC ramstage/drivers/emulation/qemu/qemu_debugcon.o CC ramstage/device/cardbus_device.o CC ramstage/device/cpu_device.o CC ramstage/device/device.o CC ramstage/device/device_util.o CC ramstage/device/i2c.o CC ramstage/device/pci_class.o CC ramstage/device/pci_device.o CC ramstage/device/pci_early.o CC ramstage/device/pci_ops.o CC ramstage/device/pci_rom.o CC ramstage/device/pciexp_device.o CC ramstage/device/pcix_device.o CC ramstage/device/pnp_device.o CC ramstage/device/root_device.o CC ramstage/device/smbus_ops.o CC ramstage/cpu/x86/smm/smm_module_loader.o CC ramstage/cpu/x86/mtrr/mtrr.o CC ramstage/cpu/x86/lapic/boot_cpu.o CC ramstage/cpu/x86/lapic/lapic.o CC ramstage/cpu/x86/lapic/lapic_cpu_init.o CC ramstage/cpu/x86/lapic/secondary.o CC ramstage/cpu/x86/backup_default_smm.o CC ramstage/cpu/qemu-x86/qemu.o CC ramstage/console/console.o CC ramstage/console/die.o CC ramstage/console/init.o CC ramstage/console/post.o CC ramstage/console/printk.o CC ramstage/console/vsprintf.o CC ramstage/console/vtxprintf.o CC ramstage/commonlib/cbfs.o CC ramstage/commonlib/lz4_wrapper.o CC ramstage/commonlib/mem_pool.o CC ramstage/commonlib/region.o CC ramstage/arch/x86/acpi.o CC ramstage/arch/x86/acpi_device.o CC ramstage/arch/x86/acpigen.o CC ramstage/arch/x86/boot.o CC ramstage/arch/x86/c_start.o CC ramstage/arch/x86/cbmem.o CC ramstage/arch/x86/cpu.o CC ramstage/arch/x86/cpu_common.o CC ramstage/arch/x86/ebda.o CC ramstage/arch/x86/exception.o CC ramstage/arch/x86/gdt.o CC ramstage/arch/x86/memcpy.o CC ramstage/arch/x86/memmove.o CC ramstage/arch/x86/memset.o CC ramstage/arch/x86/mmap_boot.o CC ramstage/arch/x86/pci_ops_conf1.o CC ramstage/arch/x86/pirq_routing.o CC ramstage/arch/x86/smbios.o CC ramstage/arch/x86/tables.o CP ramstage/arch/x86/memlayout.ld CP ramstage/lib/program.ld CC generated/ramstage.o CC cbfs/fallback/ramstage.debug OBJCOPY cbfs/fallback/ramstage.elf CREATE build/mainboard/emulation/qemu-i440fx/cbfs-file.diaXdE.out (from /Users/user/src/coreboot/.config) CREATE build/mainboard/emulation/qemu-i440fx/cbfs-file.1ooO9c.out (from src/mainboard/emulation/qemu-i440fx/cmos.default) OPTION cmos_layout.bin IASL build/dsdt.aml Intel ACPI Component Architecture ASL+ Optimizing Compiler version 20160831-64 Copyright (c) 2000 - 2016 Intel Corporation coreboot toolchain v1.43 August 31st, 2016 ASL Input: dsdt.aml - 399 lines, 15111 bytes, 245 keywords AML Output: dsdt.aml - 4021 bytes, 146 named objects, 99 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 234 Optimizations IASL build/dsdt.aml disassembled correctly. Cloning SeaBIOS from Git Cloning into 'seabios'... remote: Counting objects: 783, done remote: Finding sources: 100% (443/443) remote: Total 14775 (delta 284), reused 14704 (delta 284) Receiving objects: 100% (14775/14775), 3.46 MiB | 173.00 KiB/s, done. Resolving deltas: 100% (11690/11690), done. Checking out SeaBIOS revision e2fc41e24ee0ada60fc511d60b15a41b294538be Already on 'master' Your branch is up-to-date with 'origin/master'. Switched to a new branch 'coreboot' CONFIG SeaBIOS e2fc41e24ee0ada60fc511d60b15a41b294538be /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:77:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("aborted!\n\n")); ^~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:77:10: note: treat the string as an argument to avoid this printf(_("aborted!\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:78:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("Console input/output is redirected. ")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:78:10: note: treat the string as an argument to avoid this printf(_("Console input/output is redirected. ")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:79:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("Run 'make oldconfig' to update configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:79:10: note: treat the string as an argument to avoid this printf(_("Run 'make oldconfig' to update configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:89:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("(NEW) ")); ^~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:89:10: note: treat the string as an argument to avoid this printf(_("(NEW) ")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:290:12: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_(" (NEW)")); ^~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:290:12: note: treat the string as an argument to avoid this printf(_(" (NEW)")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:438:13: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("*\n* Restart config...\n*\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:438:13: note: treat the string as an argument to avoid this printf(_("*\n* Restart config...\n*\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:636:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] _("\n*** The configuration requires explicit update.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:636:6: note: treat the string as an argument to avoid this _("\n*** The configuration requires explicit update.\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:689:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:689:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:693:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:693:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:704:20: warning: format string is not a string literal (potentially insecure) [-Wformat-security] fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^~~~~~~~~~~~~ /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/conf.c:704:20: note: treat the string as an argument to avoid this fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); ^ "%s", /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/scripts/kconfig/lkc.h:36:17: note: expanded from macro '_' #define _(text) gettext(text) ^ 10 warnings generated. # # configuration written to /Users/user/src/coreboot/payloads/external/SeaBIOS/seabios/.config # MAKE SeaBIOS e2fc41e24ee0ada60fc511d60b15a41b294538be Build Kconfig config file Compile checking out/src/misc.o Compile checking out/src/stacks.o Compile checking out/src/output.o Compile checking out/src/string.o Compile checking out/src/block.o Compile checking out/src/cdrom.o Compile checking out/src/disk.o Compile checking out/src/mouse.o Compile checking out/src/kbd.o Compile checking out/src/system.o Compile checking out/src/serial.o Compile checking out/src/clock.o Compile checking out/src/resume.o Compile checking out/src/pnpbios.o Compile checking out/src/vgahooks.o Compile checking out/src/pcibios.o Compile checking out/src/apm.o Compile checking out/src/hw/pci.o Compile checking out/src/hw/timer.o Compile checking out/src/hw/rtc.o Compile checking out/src/hw/dma.o Compile checking out/src/hw/pic.o Compile checking out/src/hw/ps2port.o Compile checking out/src/hw/serialio.o Compile checking out/src/hw/usb.o Compile checking out/src/hw/usb-uhci.o Compile checking out/src/hw/usb-ohci.o Compile checking out/src/hw/usb-ehci.o Compile checking out/src/hw/usb-hid.o Compile checking out/src/hw/usb-msc.o Compile checking out/src/hw/usb-uas.o Compile checking out/src/hw/blockcmd.o Compile checking out/src/hw/floppy.o Compile checking out/src/hw/ata.o Compile checking out/src/hw/ramdisk.o Compile checking out/src/hw/lsi-scsi.o Compile checking out/src/hw/esp-scsi.o Compile checking out/src/hw/megasas.o Compile checking out/src/post.o Compile checking out/src/e820map.o Compile checking out/src/malloc.o Compile checking out/src/romfile.o Compile checking out/src/x86.o Compile checking out/src/optionroms.o Compile checking out/src/pmm.o Compile checking out/src/font.o Compile checking out/src/boot.o Compile checking out/src/bootsplash.o Compile checking out/src/jpeg.o Compile checking out/src/bmp.o Compile checking out/src/tcgbios.o Compile checking out/src/sha1.o Compile checking out/src/hw/ahci.o Compile checking out/src/hw/pvscsi.o Compile checking out/src/hw/usb-xhci.o Compile checking out/src/hw/usb-hub.o Compile checking out/src/hw/sdcard.o Compile checking out/src/fw/coreboot.o Compile checking out/src/fw/lzmadecode.o Compile checking out/src/fw/multiboot.o Compile checking out/src/fw/csm.o Compile checking out/src/fw/biostables.o Compile checking out/src/fw/paravirt.o Compile checking out/src/fw/shadow.o Compile checking out/src/fw/pciinit.o Compile checking out/src/fw/smm.o Compile checking out/src/fw/smp.o Compile checking out/src/fw/mtrr.o Compile checking out/src/fw/xen.o Compiling IASL out/src/fw/acpi-dsdt.hex clang: error: no input files make[2]: *** [out/src/fw/acpi-dsdt.hex] Error 1 make[1]: *** [build] Error 2 make: *** [payloads/external/SeaBIOS/seabios/out/bios.bin.elf] Error 2 Am I missing something here? Best regards

1 0

Re: [coreboot] Inteal Leafhill : Linux SATA driver fails when used with coreboot+grub
by Gailu Singh 06 Mar '17

06 Mar '17

Hi, For multiple Intel SOCs I see sata initialization in sata.c file but that seems to be missing for apollolake. Could that be a reason? ./soc/intel/skylake/sata.c ./soc/intel/broadwell/sata.c ./soc/intel/baytrail/sata.c ./soc/intel/braswell/sata.c Thanks On Mon, Mar 6, 2017 at 12:28 AM, Gailu Singh <gailu96(a)gmail.com> wrote: > Hi Again, > > I tried to find out the details for following error > > ata1: SATA link down (SStatus 4 SControl 300) > > As per status register description > > SStatus 4 : Phy in offline mode as a result of the interface being > disabled or running in a BIST loopback mode > > Is there any chance that coreboot/grub/Linux is putting SATA in to BIST > loopback mode? > > I am trying to understand who is responsible for SATA Linux status 4 and > possible candidates are > a) coreboot > b) grub > c) Linux > > Looking forward to your expert advice > > > Thanks > > On Fri, Mar 3, 2017 at 9:29 PM, Gailu Singh <gailu96(a)gmail.com> wrote: > >> Hi Experts, >> >> I am trying to boot Linux 4.1 with coreboot and grub but SATA drive fails >> with error "ata1: SATA link down (SStatus 4 SControl 300)". It is >> interesting that GRUB2 can use the SATA drive without issue and able to >> load kernel from SATA disk. >> >> If I use same SATA Drive with Coreboot+UEFI payload then Linux driver >> just works fine and I am able to boot linux. >> >> Any Idea What might be going wrong with Linux Driver. Does it expect >> something from BIOS/Coreboot that is not fulfilled >> >> Linux boot logs: >> --------------------- >> Initializing cgroup subsys cpuset >> Initializing cgroup subsys cpu >> Initializing cgroup subsys cpuacct >> Linux version 4.1.21-WR8.0.0.11_standard (vgahlaut@ubuntu) (gcc version >> 5.2.0 (Wind River Linux 5.2.0-8.0-intel-apollolake-i-64) ) #1 SMP >> PREEMPT Mon Feb 6 18:38:46 PST 2017 >> Command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage root=/dev/sda1 >> rootdelay=10 console=ttyS2,115200 >> KERNEL supported cpus: >> Intel GenuineIntel >> AMD AuthenticAMD >> Centaur CentaurHauls >> e820: BIOS-provided physical RAM map: >> BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 >> BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable >> BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved >> BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable >> BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved >> BIOS-e820: [mem 0x0000000012151000-0x000000007a64ffff] usable >> BIOS-e820: [mem 0x000000007a650000-0x000000007affffff] type 16 >> BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved >> BIOS-e820: [mem 0x00000000d0000000-0x00000000ffffffff] reserved >> BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable >> NX (Execute Disable) protection: active >> SMBIOS 2.7 present. >> e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 >> PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC >> e820: last_pfn = 0x7a650 max_arch_pfn = 0x400000000 >> Scanning 1 areas for low memory corruption >> Using GB pages for direct mapping >> init_memory_mapping: [mem 0x00000000-0x000fffff] >> init_memory_mapping: [mem 0x17fe00000-0x17fffffff] >> init_memory_mapping: [mem 0x160000000-0x17fdfffff] >> init_memory_mapping: [mem 0x00100000-0x0fffffff] >> init_memory_mapping: [mem 0x12151000-0x7a64ffff] >> init_memory_mapping: [mem 0x100000000-0x15fffffff] >> ACPI: Early table checksum verification disabled >> ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) >> ACPI: XSDT 0x000000007A6690E0 00005C (v01 CORE COREBOOT 00000000 CORE >> 00000000) >> ACPI: FACP 0x000000007A66BA60 00010C (v05 CORE COREBOOT 00000000 CORE >> 00000001) >> ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: >> 32/16 (20150410/tbfadt-623) >> ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, >> using default 32 (20150410/tbfadt-704) >> ACPI: DSDT 0x000000007A669280 0027D8 (v05 COREv4 COREBOOT 20110725 INTL >> 20160831) >> ACPI: FACS 0x000000007A669240 000040 >> ACPI: FACS 0x000000007A669240 000040 >> ACPI: SSDT 0x000000007A66BB70 000774 (v02 CORE COREBOOT 0000002A CORE >> 0000002A) >> ACPI: MCFG 0x000000007A66C2F0 00003C (v01 CORE COREBOOT 00000000 CORE >> 00000000) >> ACPI: TCPA 0x000000007A66C330 000032 (v02 CORE COREBOOT 00000000 CORE >> 00000000) >> ACPI: TPM2 0x000000007A66C370 000034 (v04 CORE COREBOOT 00000000 CORE >> 00000000) >> ACPI: APIC 0x000000007A66C3B0 00006C (v01 CORE COREBOOT 00000000 CORE >> 00000000) >> ACPI: HPET 0x000000007A66C420 000038 (v01 CORE COREBOOT 00000000 CORE >> 00000000) >> Zone ranges: >> DMA [mem 0x0000000000001000-0x0000000000ffffff] >> DMA32 [mem 0x0000000001000000-0x00000000ffffffff] >> Normal [mem 0x0000000100000000-0x000000017fffffff] >> Movable zone start for each node >> Early memory node ranges >> node 0: [mem 0x0000000000001000-0x000000000009ffff] >> node 0: [mem 0x0000000000100000-0x000000000fffffff] >> node 0: [mem 0x0000000012151000-0x000000007a64ffff] >> node 0: [mem 0x0000000100000000-0x000000017fffffff] >> Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] >> ACPI: PM-Timer IO Port: 0x408 >> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> Using ACPI (MADT) for SMP configuration information >> ACPI: HPET id: 0x8086a701 base: 0xfed00000 >> smpboot: Allowing 4 CPUs, 0 hotplug CPUs >> PM: Registered nosave memory: [mem 0x00000000-0x00000fff] >> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] >> PM: Registered nosave memory: [mem 0x10000000-0x12150fff] >> PM: Registered nosave memory: [mem 0x7a650000-0x7affffff] >> PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] >> PM: Registered nosave memory: [mem 0x80000000-0xcfffffff] >> PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] >> e820: [mem 0x80000000-0xcfffffff] available for PCI devices >> clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, >> max_idle_ns: 1910969940391419 ns >> setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 >> PERCPU: Embedded 32 pages/cpu @ffff88017fc00000 s93912 r8192 d28968 >> u524288 >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >> 1001076 >> Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage >> root=/dev/sda1 rootdelay=10 console=ttyS2,115200 >> PID hash table entries: 4096 (order: 3, 32768 bytes) >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> xsave: enabled xstate_bv 0x1b, cntxt size 0x440 using standard form >> Memory: 3909396K/4067960K available (10570K kernel code, 1220K rwdata, >> 4084K rodata, 1380K init, 1068K bss, 158564K reserved, 0K cma-reserved) >> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 >> Preemptible hierarchical RCU implementation. >> Additional per-CPU info printed with stalls. >> NR_IRQS:4352 nr_irqs:1024 16 >> Console: colour dummy device 80x25 >> console [ttyS2] enabled >> clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: >> 99544814920 ns >> tsc: PIT calibration matches HPET. 1 loops >> tsc: Detected 1593.639 MHz processor >> Calibrating delay loop (skipped), value calculated using timer >> frequency.. 3187.27 BogoMIPS (lpj=1593639) >> pid_max: default: 32768 minimum: 301 >> ACPI: Core revision 20150410 >> ACPI: 2 ACPI AML tables successfully acquired and loaded >> Security Framework initialized >> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) >> Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) >> Initializing cgroup subsys blkio >> Initializing cgroup subsys memory >> Initializing cgroup subsys devices >> Initializing cgroup subsys freezer >> Initializing cgroup subsys net_cls >> Initializing cgroup subsys debug >> CPU: Physical Processor ID: 0 >> CPU: Processor Core ID: 0 >> mce: CPU supports 7 MCE banks >> CPU0: Thermal monitoring enabled (TM1) >> Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 >> Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 >> Freeing SMP alternatives memory: 36K (ffffffff8228c000 - ffffffff82295000) >> ftrace: allocating 36317 entries in 142 pages >> x2apic: IRQ remapping doesn't support X2APIC mode >> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> smpboot: CPU0: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (family: 0x6, >> model: 0x5c, stepping: 0x9) >> Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width >> counters, Intel PMU driver. >> ... version: 4 >> ... bit width: 48 >> ... generic registers: 4 >> ... value mask: 0000ffffffffffff >> ... max period: 0000ffffffffffff >> ... fixed-purpose events: 3 >> ... event mask: 000000070000000f >> x86: Booting SMP configuration: >> .... node #0, CPUs: #1 #2 #3 >> x86: Booted up 1 node, 4 CPUs >> smpboot: Total of 4 processors activated (12749.11 BogoMIPS) >> devtmpfs: initialized >> clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, >> max_idle_ns: 1911260446275000 ns >> xor: measuring software checksum speed >> prefetch64-sse: 10212.000 MB/sec >> generic_sse: 8832.000 MB/sec >> xor: using function: prefetch64-sse (10212.000 MB/sec) >> pinctrl core: initialized pinctrl subsystem >> NET: Registered protocol family 16 >> cpuidle: using governor ladder >> cpuidle: using governor menu >> >> failed to register the SPI slaves... >> ACPI: bus type PCI registered >> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] >> (base 0xe0000000) >> PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 >> PCI: Using configuration type 1 for base access >> raid6: sse2x1 gen() 4566 MB/s >> raid6: sse2x1 xor() 2697 MB/s >> raid6: sse2x2 gen() 4988 MB/s >> raid6: sse2x2 xor() 3156 MB/s >> raid6: sse2x4 gen() 5699 MB/s >> raid6: sse2x4 xor() 2541 MB/s >> raid6: using algorithm sse2x4 gen() 5699 MB/s >> raid6: .... xor() 2541 MB/s, rmw enabled >> raid6: using ssse3x2 recovery algorithm >> ACPI: Added _OSI(Module Device) >> ACPI: Added _OSI(Processor Device) >> ACPI: Added _OSI(3.0 _SCP Extensions) >> ACPI: Added _OSI(Processor Aggregator Device) >> ACPI: Executed 1 blocks of module-level executable AML code >> ACPI: Interpreter enabled >> ACPI: (supports S0 S3 S4 S5) >> ACPI: Using IOAPIC for interrupt routing >> PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" >> and report a bug >> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) >> acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments >> MSI] >> acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER >> PCIeCapability] >> PCI host bridge to bus 0000:00 >> pci_bus 0000:00: root bus resource [bus 00-ff] >> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] >> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] >> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] >> pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] >> pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] >> pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] >> pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] >> pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] >> pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] >> pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] >> pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] >> pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] >> pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] >> pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] >> pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] >> pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] >> pci_bus 0000:00: root bus resource [mem 0x7c000000-0x7fffffff window] >> pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] >> pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] >> pci 0000:00:13.0: PCI bridge to [bus 01] >> pci 0000:00:13.2: PCI bridge to [bus 02] >> pci 0000:00:13.3: PCI bridge to [bus 03] >> pci 0000:00:14.0: PCI bridge to [bus 04] >> pci 0000:00:14.1: PCI bridge to [bus 05] >> pci 0000:02:00.0: Max Payload Size 128, but upstream 0000:00:13.2 set to >> 256; if necessary, use "pci=pcie_bus_safe" and report a bug >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. >> vgaarb: setting as boot device: PCI:0000:00:02.0 >> vgaarb: device added: PCI:0000:00:02.0,decodes=io+me >> m,owns=io+mem,locks=none >> vgaarb: loaded >> vgaarb: bridge control possible 0000:00:02.0 >> SCSI subsystem initialized >> ACPI: bus type USB registered >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> pps_core: LinuxPPS API ver. 1 registered >> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < >> giometti(a)linux.it> >> PTP clock support registered >> EDAC MC: Ver: 3.0.0 >> Advanced Linux Sound Architecture Driver Initialized. >> PCI: Using ACPI for IRQ routing >> Bluetooth: Core ver 2.20 >> NET: Registered protocol family 31 >> Bluetooth: HCI device and connection manager initialized >> Bluetooth: HCI socket layer initialized >> Bluetooth: L2CAP socket layer initialized >> Bluetooth: SCO socket layer initialized >> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >> hpet0: 8 comparators, 64-bit 19.200000 MHz counter >> Switched to clocksource hpet >> pnp: PnP ACPI init >> system 00:00: [mem 0xd0000000-0xdfffffff] could not be reserved >> system 00:00: [mem 0xe0000000-0xefffffff] has been reserved >> system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved >> system 00:01: [io 0x0400-0x04fe] could not be reserved >> pnp: PnP ACPI: found 3 devices >> clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: >> 2085701024 ns >> pci 0000:00:13.0: BAR 8: assigned [mem 0x80000000-0x801fffff] >> pci 0000:00:13.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] >> pci 0000:00:13.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref] >> pci 0000:00:14.0: BAR 8: assigned [mem 0x80600000-0x807fffff] >> pci 0000:00:14.0: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref] >> pci 0000:00:14.1: BAR 8: assigned [mem 0x80a00000-0x80bfffff] >> pci 0000:00:14.1: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref] >> pci 0000:00:13.0: BAR 7: assigned [io 0x3000-0x3fff] >> pci 0000:00:14.0: BAR 7: assigned [io 0x4000-0x4fff] >> pci 0000:00:14.1: BAR 7: assigned [io 0x5000-0x5fff] >> pci 0000:00:13.0: PCI bridge to [bus 01] >> pci 0000:00:13.0: bridge window [io 0x3000-0x3fff] >> pci 0000:00:13.0: bridge window [mem 0x80000000-0x801fffff] >> pci 0000:00:13.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] >> pci 0000:00:13.2: PCI bridge to [bus 02] >> pci 0000:00:13.2: bridge window [io 0x1000-0x1fff] >> pci 0000:00:13.2: bridge window [mem 0xc1300000-0xc13fffff] >> pci 0000:00:13.2: bridge window [mem 0x80400000-0x805fffff 64bit pref] >> pci 0000:00:13.3: PCI bridge to [bus 03] >> pci 0000:00:14.0: PCI bridge to [bus 04] >> pci 0000:00:14.0: bridge window [io 0x4000-0x4fff] >> pci 0000:00:14.0: bridge window [mem 0x80600000-0x807fffff] >> pci 0000:00:14.0: bridge window [mem 0x80800000-0x809fffff 64bit pref] >> pci 0000:00:14.1: PCI bridge to [bus 05] >> pci 0000:00:14.1: bridge window [io 0x5000-0x5fff] >> pci 0000:00:14.1: bridge window [mem 0x80a00000-0x80bfffff] >> pci 0000:00:14.1: bridge window [mem 0x80c00000-0x80dfffff 64bit pref] >> NET: Registered protocol family 2 >> TCP established hash table entries: 32768 (order: 6, 262144 bytes) >> TCP bind hash table entries: 32768 (order: 7, 524288 bytes) >> TCP: Hash tables configured (established 32768 bind 32768) >> UDP hash table entries: 2048 (order: 4, 65536 bytes) >> UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) >> NET: Registered protocol family 1 >> RPC: Registered named UNIX socket transport module. >> RPC: Registered udp transport module. >> RPC: Registered tcp transport module. >> RPC: Registered tcp NFSv4.1 backchannel transport module. >> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> software IO TLB [mem 0x76650000-0x7a650000] (64MB) mapped at >> [ffff880076650000-ffff88007a64ffff] >> microcode: CPU0 sig=0x506c9, pf=0x1, revision=0x1c >> microcode: CPU1 sig=0x506c9, pf=0x1, revision=0x1c >> microcode: CPU2 sig=0x506c9, pf=0x1, revision=0x1c >> microcode: CPU3 sig=0x506c9, pf=0x1, revision=0x1c >> microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, >> Peter Oruba >> Scanning for low memory corruption every 60 seconds >> Apollo Lake Sideband Interface loading >> i2c adapter not found >> i2c adapter not found >> futex hash table entries: 1024 (order: 4, 65536 bytes) >> HugeTLB registered 1 GB page size, pre-allocated 0 pages >> HugeTLB registered 2 MB page size, pre-allocated 0 pages >> NFS: Registering the id_resolver key type >> Key type id_resolver registered >> Key type id_legacy registered >> aufs 4.1-20150629 >> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) >> io scheduler noop registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> pcieport 0000:00:13.0: enabling device (0104 -> 0107) >> pcieport 0000:00:14.0: enabling device (0104 -> 0107) >> pcieport 0000:00:14.1: enabling device (0104 -> 0107) >> pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt >> pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt >> pci 0000:02:00.0: Signaling PME through PCIe PME interrupt >> pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt >> pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt >> pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt >> pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> efifb: probing for efifb >> efifb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using >> 8128k, total 8128k >> efifb: mode is 1920x1080x32, linelength=7680, pages=1 >> efifb: scrolling: redraw >> efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >> Console: switching to colour frame buffer device 240x67 >> fb0: EFI VGA frame buffer device >> input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: >> 00/PNP0C0C:00/input/input0 >> ACPI: Power Button [PWRB] >> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> ACPI: Power Button [PWRF] >> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >> Linux agpgart interface v0.103 >> [drm] Initialized drm 1.1.0 20060810 >> [drm] Memory usable by graphics device = 4096M >> fb: switching to inteldrmfb from EFI VGA >> Console: switching to colour dummy device 80x25 >> [drm] Replacing VGA console driver >> [drm] RC6 disabled by BIOS >> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >> [drm] Driver supports precise vblank timestamp query. >> i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1.bin failed >> with error -2 >> i915 0000:00:02.0: Failed to load DMC firmware [ >> https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling >> runtime power management. >> vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io >> +mem,decodes=io+mem:owns=io+mem >> [drm] failed to retrieve link info, disabling eDP >> i915 0000:00:02.0: Direct firmware load for i915/bxt_guc_ver8.bin failed >> with error -2 >> [drm:intel_guc_ucode_init] *ERROR* Failed to fetch GuC firmware from >> i915/bxt_guc_ver8.bin (error -2) >> tsc: Refined TSC clocksource calibration: 1593.615 MHz >> clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x16f89566daa, >> max_idle_ns: 440795280110 ns >> [drm] RC6 disabled, disabling runtime PM support >> IOTG i915 forklift 2016-03-25 >> IOTG i915 build 2016y-05m-16d-15h-25m-52s -0700 (45c9a12) >> [drm] Initialized i915 1.6.0 20160314 for 0000:00:02.0 on minor 0 >> brd: module loaded >> loop: module loaded >> sbi_apl starting, bus 0, device d.0 >> apl_gpio apl_gpio.1: Failed to attach ACPI GPIO chip >> apl_gpio apl_gpio.2: Failed to attach ACPI GPIO chip >> apl_gpio apl_gpio.3: Failed to attach ACPI GPIO chip >> idma64 idma64.0: Found Intel integrated DMA 64-bit >> idma64 idma64.1: Found Intel integrated DMA 64-bit >> idma64 idma64.2: Found Intel integrated DMA 64-bit >> idma64 idma64.3: Found Intel integrated DMA 64-bit >> idma64 idma64.4: Found Intel integrated DMA 64-bit >> idma64 idma64.5: Found Intel integrated DMA 64-bit >> idma64 idma64.6: Found Intel integrated DMA 64-bit >> idma64 idma64.7: Found Intel integrated DMA 64-bit >> idma64 idma64.8: Found Intel integrated DMA 64-bit >> dw-apb-uart.8: ttyS0 at MMIO 0xc1435000 (irq = 4, base_baud = 115200) is >> a 16550A >> idma64 idma64.9: Found Intel integrated DMA 64-bit >> dw-apb-uart.9: ttyS1 at MMIO 0xc1437000 (irq = 5, base_baud = 115200) is >> a 16550A >> console [ttyS2] disabled >> dw-apb-uart.10: ttyS2 at MMIO 0xc1439000 (irq = 6, base_baud = 114825) is >> a 16550A >> Switched to clocksource tsc >> [drm] RC6 off >> [drm:host2guc_action] *ERROR* GuC: host2guc action 0x6 failed. ret=-110 >> status=0x00000006 response=0x00000000 >> console [ttyS2] enabled >> fbcon: inteldrmfb (fb0) is primary device >> dw-apb-uart.11: ttyS3 at MMIO 0xc143b000 (irq = 7, base_baud = 115200) is >> a 16550A >> Console: switching to colour frame buffer device 240x67 >> idma64 idma64.12: Found Intel integrated DMA 64-bit >> pxa2xx-spi pxa2xx-spi.12: cs2 >= max 2 >> pxa2xx-spi pxa2xx-spi.12: can't create new device for spidev >> idma64 idma64.13: Found Intel integrated DMA 64-bit >> pxa2xx-spi pxa2xx-spi.13: cs2 >= max 2 >> pxa2xx-spi pxa2xx-spi.13: can't create new device for spidev >> idma64 idma64.14: Found Intel integrated DMA 64-bit >> ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA >> mode >> ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part >> deso sadm sds apst >> scsi host0: ahci >> ata1: SATA max UDMA/133 abar m2048@0xc1449000 port 0xc1449100 irq 372 >> igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k >> igb: Copyright (c) 2007-2014 Intel Corporation. >> pps pps0: new PPS source ptp0 >> igb 0000:02:00.0: added PHC on eth0 >> igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection >> igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 98:4f:ee:13:bb:76 >> igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF >> igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) >> Failed to set pin attr for GSI13 >> dwc3-pci 0000:00:15.1: PCI INT B: failed to register GSI >> dwc3-pci: probe of 0000:00:15.1 failed with error -1 >> xhci_hcd 0000:00:15.0: xHCI Host Controller >> xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 >> xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks >> 0x00009810 >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 8 ports detected >> xhci_hcd 0000:00:15.0: xHCI Host Controller >> xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 7 ports detected >> usbcore: registered new interface driver usb-storage >> i8042: PNP: No PS/2 controller found. Probing ports directly. >> i915 0000:00:02.0: fb0: inteldrmfb frame buffer device >> ata1: SATA link down (SStatus 4 SControl 300) >> i8042: No controller found >> mousedev: PS/2 mouse device common for all mice >> rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 >> rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs >> i2c /dev entries driver >> i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A >> i801_smbus 0000:00:1f.1: PCI INT A: no GSI >> genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer) >> i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16 >> i801_smbus 0000:00:1f.1: SMBus using polling >> md: linear personality registered for level -1 >> md: raid0 personality registered for level 0 >> md: raid1 personality registered for level 1 >> md: raid10 personality registered for level 10 >> md: multipath personality registered for level -4 >> md: faulty personality registered for level -5 >> device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: >> dm-devel(a)redhat.com >> EDAC pnd2: ECC disabled on channel 0 >> EDAC pnd2: Failed to register device with error -22. >> Intel P-state driver initializing. >> sdhci: Secure Digital Host Controller Interface driver >> sdhci: Copyright(c) Pierre Ossman >> sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b) >> sdhci-pci 0000:00:1b.0: failed to setup card detect gpio >> sdhci-pci 0000:00:1b.0: No vmmc regulator found >> sdhci-pci 0000:00:1b.0: No vqmmc regulator found >> mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit >> sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) >> sdhci-pci 0000:00:1c.0: No vmmc regulator found >> sdhci-pci 0000:00:1c.0: No vqmmc regulator found >> usb 1-2: new low-speed USB device number 2 using xhci_hcd >> mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit >> sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) >> sdhci-pci 0000:00:1e.0: No vmmc regulator found >> sdhci-pci 0000:00:1e.0: No vqmmc regulator found >> mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit >> usbcore: registered new interface driver usbhid >> usbhid: USB HID core driver >> mmc1: MAN_BKOPS_EN bit is not set >> mmc1: new HS400 MMC card at address 0001 >> mmcblk0: mmc1:0001 CGND3R 58.2 GiB >> mmcblk0boot0: mmc1:0001 CGND3R partition 1 4.00 MiB >> mmcblk0boot1: mmc1:0001 CGND3R partition 2 4.00 MiB >> mmcblk0rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB >> usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 >> microframes >> usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 >> microframes >> input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:15 >> .0/usb1/1-2/1-2:1.0/0003:1C4F:0016.0001/input/input2 >> hid-generic 0003:1C4F:0016.0001: input: USB HID v1.10 Keyboard [SIGMACHIP >> USB Keyboard] on usb-0000:00:15.0-2/input0 >> input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:15 >> .0/usb1/1-2/1-2:1.1/0003:1C4F:0016.0002/input/input3 >> hid-generic 0003:1C4F:0016.0002: input: USB HID v1.10 Device [SIGMACHIP >> USB Keyboard] on usb-0000:00:15.0-2/input1 >> oprofile: using NMI interrupt. >> u32 classifier >> Actions configured >> NET: Registered protocol family 10 >> sit: IPv6 over IPv4 tunneling driver >> NET: Registered protocol family 17 >> l2tp_core: L2TP core driver, V2.0 >> l2tp_netlink: L2TP netlink interface >> Key type dns_resolver registered >> Btrfs loaded >> console [netcon0] enabled >> netconsole: network logging started >> rtc_cmos 00:02: setting system clock to 2017-02-25 20:39:16 UTC >> (1488055156) >> snd_hda_codec_realtek hdaudioC0D0: ALC662 rev3: SKU not ready 0x00000100 >> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: >> line_outs=3 (0x14/0x16/0x15/0x0/0x0) type:line >> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) >> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 >> snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 >> snd_hda_codec_realtek hdaudioC0D0: inputs: >> snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 >> snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 >> snd_hda_codec_realtek hdaudioC0D0: Line=0x1a >> snd_hda_codec_realtek hdaudioC0D0: CD=0x1c >> snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec >> input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input4 >> input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input5 >> input: HDA Intel Line as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input6 >> input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input7 >> input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input8 >> input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input9 >> input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input10 >> input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e >> .0/sound/card0/input11 >> ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: >> enum_devices_done OK, num_hid_devices=4 >> ALSA device list: >> #0: HDA Intel at 0xc1418000 irq 379 >> ttyS2 - failed to request DMA >> Waiting 10 sec before mounting root device... >> md: Waiting for all devices to be available before autodetect >> md: If you don't use raid, use raid=noautodetect >> md: Autodetecting RAID arrays. >> md: Scanned 0 and added 0 devices. >> md: autorun ... >> md: ... autorun DONE. >> VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6 >> Please append a correct "root=" boot option; here are the available >> partitions: >> 0100 4096 ram0 (driver?) >> 0101 4096 ram1 (driver?) >> 0102 4096 ram2 (driver?) >> 0103 4096 ram3 (driver?) >> 0104 4096 ram4 (driver?) >> 0105 4096 ram5 (driver?) >> 0106 4096 ram6 (driver?) >> 0107 4096 ram7 (driver?) >> 0108 4096 ram8 (driver?) >> 0109 4096 ram9 (driver?) >> 010a 4096 ram10 (driver?) >> 010b 4096 ram11 (driver?) >> 010c 4096 ram12 (driver?) >> 010d 4096 ram13 (driver?) >> 010e 4096 ram14 (driver?) >> 010f 4096 ram15 (driver?) >> b300 61071360 mmcblk0 driver: mmcblk >> b318 4096 mmcblk0rpmb (driver?) >> b310 4096 mmcblk0boot1 (driver?) >> b308 4096 mmcblk0boot0 (driver?) >> VFS: Unable to mount root fs on unknown-block(0,0) >> User configuration error - no valid root filesystem found >> Kernel panic - not syncing: Invalid configuration from end user prevents >> continuing >> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.21-WR8.0.0.11_standard #1 >> Hardware name: Intel Leafhill/Leafhill, BIOS APOLLOLAKE_CB_MR1_001 >> 03/02/2017 >> 0000000000000000 ffff88017b12fd28 ffffffff81a4568e ffffffff81eb7630 >> 0000000000008001 ffff88017b12fda8 ffffffff81a438fa ffff88017b12fd48 >> ffffffff00000008 ffff88017b12fdb8 ffff88017b12fd58 62306b6c62636d6d >> Call Trace: >> [<ffffffff81a4568e>] dump_stack+0x4f/0x65 >> [<ffffffff81a438fa>] panic+0xbb/0x1d1 >> [<ffffffff8214b544>] mount_block_root+0x21e/0x235 >> [<ffffffff8214b76b>] mount_root+0xf1/0xfc >> [<ffffffff811a69a6>] ? SyS_unlink+0x16/0x20 >> [<ffffffff8214b8e3>] prepare_namespace+0x16d/0x1a6 >> [<ffffffff8214b16f>] kernel_init_freeable+0x200/0x215 >> [<ffffffff81a414e0>] ? rest_init+0x90/0x90 >> [<ffffffff81a414ee>] kernel_init+0xe/0xf0 >> [<ffffffff81a4dea2>] ret_from_fork+0x42/0x70 >> [<ffffffff81a414e0>] ? rest_init+0x90/0x90 >> Kernel Offset: disabled >> ---[ end Kernel panic - not syncing: Invalid configuration from end user >> prevents continuing >> >> >

1 0

Re: [coreboot] Inteal Leafhill : Linux SATA driver fails when used with coreboot+grub
by Andrey Petrov 06 Mar '17

06 Mar '17

On 03/05/2017 10:58 AM, Gailu Singh wrote: > Hi Again, > > I tried to find out the details for following error > > ata1: SATA link down (SStatus 4 SControl 300) > > As per status register description > > SStatus 4 : Phy in offline mode as a result of the interface being > disabled or running in a BIST loopback mode > > Is there any chance that coreboot/grub/Linux is putting SATA in to BIST > loopback mode? > > I am trying to understand who is responsible for SATA Linux status 4 and > possible candidates are > a) coreboot > b) grub > c) Linux You already mentioned coreboot+tianocore worked fine under Linux. I think it is safe to assume the problem is not originating from the kernel. Why don't you check what tianocore does about SATA? I suspect tianocore may be injecting some ACPI tables for SATA controller which kernel picks up. Perhaps you can dump, decompile and compare asl from coreboot+tianocore and coreboot+grub and see what is different? Andrey

1 0

Re: [coreboot] AGESA massive rewrite expected
by Taiidan＠gmx.com 06 Mar '17

06 Mar '17

Does this mean that the IOMMU stubs will be functional?

2 1

AGESA massive rewrite expected
by Kyösti Mälkki 05 Mar '17

05 Mar '17

Hi Again, it would be good time to update your board-status if you happen to use some Family 15 Trinity or 16 Kabini board. Older Family 14 most welcome also. Specially the fairly recent ports of elmex/pcm205400 and msi/ms7721 are without any report, and it should not take more than 15 minutes to have one sent. Currently pending work: src/mainboard/* anything AMD_AGESA 131 files changed, 672 insertions(+), 2511 deletions(-) src/cpu/amd/agesa/* src/southbridge/amd/agesa/* src/northbridge/amd/agesa/* 53 files changed, 1429 insertions(+), 807 deletions(-) Yes, stuff will get pushed away from mainboard directories towards common directories. Should get us closer to EARLY_CBMEM_INIT and working timestamps and CBMEM console from romstage. It probably will not make it in time for coreboot 4.6 unless I meet exceptionally eager people to run some tests. Kyösti

1 0

Re: [coreboot] Inteal Leafhill : Linux SATA driver fails when used with coreboot+grub
by Gailu Singh 05 Mar '17

05 Mar '17

Hi Again, I tried to find out the details for following error ata1: SATA link down (SStatus 4 SControl 300) As per status register description SStatus 4 : Phy in offline mode as a result of the interface being disabled or running in a BIST loopback mode Is there any chance that coreboot/grub/Linux is putting SATA in to BIST loopback mode? I am trying to understand who is responsible for SATA Linux status 4 and possible candidates are a) coreboot b) grub c) Linux Looking forward to your expert advice Thanks On Fri, Mar 3, 2017 at 9:29 PM, Gailu Singh <gailu96(a)gmail.com> wrote: > Hi Experts, > > I am trying to boot Linux 4.1 with coreboot and grub but SATA drive fails > with error "ata1: SATA link down (SStatus 4 SControl 300)". It is > interesting that GRUB2 can use the SATA drive without issue and able to > load kernel from SATA disk. > > If I use same SATA Drive with Coreboot+UEFI payload then Linux driver just > works fine and I am able to boot linux. > > Any Idea What might be going wrong with Linux Driver. Does it expect > something from BIOS/Coreboot that is not fulfilled > > Linux boot logs: > --------------------- > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Initializing cgroup subsys cpuacct > Linux version 4.1.21-WR8.0.0.11_standard (vgahlaut@ubuntu) (gcc version > 5.2.0 (Wind River Linux 5.2.0-8.0-intel-apollolake-i-64) ) #1 SMP PREEMPT > Mon Feb 6 18:38:46 PST 2017 > Command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage root=/dev/sda1 > rootdelay=10 console=ttyS2,115200 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > e820: BIOS-provided physical RAM map: > BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 > BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable > BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved > BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable > BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved > BIOS-e820: [mem 0x0000000012151000-0x000000007a64ffff] usable > BIOS-e820: [mem 0x000000007a650000-0x000000007affffff] type 16 > BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved > BIOS-e820: [mem 0x00000000d0000000-0x00000000ffffffff] reserved > BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable > NX (Execute Disable) protection: active > SMBIOS 2.7 present. > e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 > PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC > e820: last_pfn = 0x7a650 max_arch_pfn = 0x400000000 > Scanning 1 areas for low memory corruption > Using GB pages for direct mapping > init_memory_mapping: [mem 0x00000000-0x000fffff] > init_memory_mapping: [mem 0x17fe00000-0x17fffffff] > init_memory_mapping: [mem 0x160000000-0x17fdfffff] > init_memory_mapping: [mem 0x00100000-0x0fffffff] > init_memory_mapping: [mem 0x12151000-0x7a64ffff] > init_memory_mapping: [mem 0x100000000-0x15fffffff] > ACPI: Early table checksum verification disabled > ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) > ACPI: XSDT 0x000000007A6690E0 00005C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: FACP 0x000000007A66BA60 00010C (v05 CORE COREBOOT 00000000 CORE > 00000001) > ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: > 32/16 (20150410/tbfadt-623) > ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using > default 32 (20150410/tbfadt-704) > ACPI: DSDT 0x000000007A669280 0027D8 (v05 COREv4 COREBOOT 20110725 INTL > 20160831) > ACPI: FACS 0x000000007A669240 000040 > ACPI: FACS 0x000000007A669240 000040 > ACPI: SSDT 0x000000007A66BB70 000774 (v02 CORE COREBOOT 0000002A CORE > 0000002A) > ACPI: MCFG 0x000000007A66C2F0 00003C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: TCPA 0x000000007A66C330 000032 (v02 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: TPM2 0x000000007A66C370 000034 (v04 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: APIC 0x000000007A66C3B0 00006C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: HPET 0x000000007A66C420 000038 (v01 CORE COREBOOT 00000000 CORE > 00000000) > Zone ranges: > DMA [mem 0x0000000000001000-0x0000000000ffffff] > DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > Normal [mem 0x0000000100000000-0x000000017fffffff] > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x0000000000001000-0x000000000009ffff] > node 0: [mem 0x0000000000100000-0x000000000fffffff] > node 0: [mem 0x0000000012151000-0x000000007a64ffff] > node 0: [mem 0x0000000100000000-0x000000017fffffff] > Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] > ACPI: PM-Timer IO Port: 0x408 > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a701 base: 0xfed00000 > smpboot: Allowing 4 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: [mem 0x00000000-0x00000fff] > PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] > PM: Registered nosave memory: [mem 0x10000000-0x12150fff] > PM: Registered nosave memory: [mem 0x7a650000-0x7affffff] > PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] > PM: Registered nosave memory: [mem 0x80000000-0xcfffffff] > PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] > e820: [mem 0x80000000-0xcfffffff] available for PCI devices > clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 1910969940391419 ns > setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 32 pages/cpu @ffff88017fc00000 s93912 r8192 d28968 u524288 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 1001076 > Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage > root=/dev/sda1 rootdelay=10 console=ttyS2,115200 > PID hash table entries: 4096 (order: 3, 32768 bytes) > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > xsave: enabled xstate_bv 0x1b, cntxt size 0x440 using standard form > Memory: 3909396K/4067960K available (10570K kernel code, 1220K rwdata, > 4084K rodata, 1380K init, 1068K bss, 158564K reserved, 0K cma-reserved) > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > Preemptible hierarchical RCU implementation. > Additional per-CPU info printed with stalls. > NR_IRQS:4352 nr_irqs:1024 16 > Console: colour dummy device 80x25 > console [ttyS2] enabled > clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: > 99544814920 ns > tsc: PIT calibration matches HPET. 1 loops > tsc: Detected 1593.639 MHz processor > Calibrating delay loop (skipped), value calculated using timer frequency.. > 3187.27 BogoMIPS (lpj=1593639) > pid_max: default: 32768 minimum: 301 > ACPI: Core revision 20150410 > ACPI: 2 ACPI AML tables successfully acquired and loaded > Security Framework initialized > Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) > Initializing cgroup subsys blkio > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > Initializing cgroup subsys debug > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 7 MCE banks > CPU0: Thermal monitoring enabled (TM1) > Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 > Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 > Freeing SMP alternatives memory: 36K (ffffffff8228c000 - ffffffff82295000) > ftrace: allocating 36317 entries in 142 pages > x2apic: IRQ remapping doesn't support X2APIC mode > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > smpboot: CPU0: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (family: 0x6, > model: 0x5c, stepping: 0x9) > Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width > counters, Intel PMU driver. > ... version: 4 > ... bit width: 48 > ... generic registers: 4 > ... value mask: 0000ffffffffffff > ... max period: 0000ffffffffffff > ... fixed-purpose events: 3 > ... event mask: 000000070000000f > x86: Booting SMP configuration: > .... node #0, CPUs: #1 #2 #3 > x86: Booted up 1 node, 4 CPUs > smpboot: Total of 4 processors activated (12749.11 BogoMIPS) > devtmpfs: initialized > clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: > 1911260446275000 ns > xor: measuring software checksum speed > prefetch64-sse: 10212.000 MB/sec > generic_sse: 8832.000 MB/sec > xor: using function: prefetch64-sse (10212.000 MB/sec) > pinctrl core: initialized pinctrl subsystem > NET: Registered protocol family 16 > cpuidle: using governor ladder > cpuidle: using governor menu > > failed to register the SPI slaves... > ACPI: bus type PCI registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > PCI: Using configuration type 1 for base access > raid6: sse2x1 gen() 4566 MB/s > raid6: sse2x1 xor() 2697 MB/s > raid6: sse2x2 gen() 4988 MB/s > raid6: sse2x2 xor() 3156 MB/s > raid6: sse2x4 gen() 5699 MB/s > raid6: sse2x4 xor() 2541 MB/s > raid6: using algorithm sse2x4 gen() 5699 MB/s > raid6: .... xor() 2541 MB/s, rmw enabled > raid6: using ssse3x2 recovery algorithm > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" > and report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments > MSI] > acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] > pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] > pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] > pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] > pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] > pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] > pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] > pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] > pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] > pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] > pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] > pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] > pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] > pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] > pci_bus 0000:00: root bus resource [mem 0x7c000000-0x7fffffff window] > pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] > pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] > pci 0000:00:13.0: PCI bridge to [bus 01] > pci 0000:00:13.2: PCI bridge to [bus 02] > pci 0000:00:13.3: PCI bridge to [bus 03] > pci 0000:00:14.0: PCI bridge to [bus 04] > pci 0000:00:14.1: PCI bridge to [bus 05] > pci 0000:02:00.0: Max Payload Size 128, but upstream 0000:00:13.2 set to > 256; if necessary, use "pci=pcie_bus_safe" and report a bug > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > vgaarb: setting as boot device: PCI:0000:00:02.0 > vgaarb: device added: PCI:0000:00:02.0,decodes=io+ > mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:00:02.0 > SCSI subsystem initialized > ACPI: bus type USB registered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < > giometti(a)linux.it> > PTP clock support registered > EDAC MC: Ver: 3.0.0 > Advanced Linux Sound Architecture Driver Initialized. > PCI: Using ACPI for IRQ routing > Bluetooth: Core ver 2.20 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO socket layer initialized > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > hpet0: 8 comparators, 64-bit 19.200000 MHz counter > Switched to clocksource hpet > pnp: PnP ACPI init > system 00:00: [mem 0xd0000000-0xdfffffff] could not be reserved > system 00:00: [mem 0xe0000000-0xefffffff] has been reserved > system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved > system 00:01: [io 0x0400-0x04fe] could not be reserved > pnp: PnP ACPI: found 3 devices > clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: > 2085701024 ns > pci 0000:00:13.0: BAR 8: assigned [mem 0x80000000-0x801fffff] > pci 0000:00:13.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] > pci 0000:00:13.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref] > pci 0000:00:14.0: BAR 8: assigned [mem 0x80600000-0x807fffff] > pci 0000:00:14.0: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref] > pci 0000:00:14.1: BAR 8: assigned [mem 0x80a00000-0x80bfffff] > pci 0000:00:14.1: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref] > pci 0000:00:13.0: BAR 7: assigned [io 0x3000-0x3fff] > pci 0000:00:14.0: BAR 7: assigned [io 0x4000-0x4fff] > pci 0000:00:14.1: BAR 7: assigned [io 0x5000-0x5fff] > pci 0000:00:13.0: PCI bridge to [bus 01] > pci 0000:00:13.0: bridge window [io 0x3000-0x3fff] > pci 0000:00:13.0: bridge window [mem 0x80000000-0x801fffff] > pci 0000:00:13.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] > pci 0000:00:13.2: PCI bridge to [bus 02] > pci 0000:00:13.2: bridge window [io 0x1000-0x1fff] > pci 0000:00:13.2: bridge window [mem 0xc1300000-0xc13fffff] > pci 0000:00:13.2: bridge window [mem 0x80400000-0x805fffff 64bit pref] > pci 0000:00:13.3: PCI bridge to [bus 03] > pci 0000:00:14.0: PCI bridge to [bus 04] > pci 0000:00:14.0: bridge window [io 0x4000-0x4fff] > pci 0000:00:14.0: bridge window [mem 0x80600000-0x807fffff] > pci 0000:00:14.0: bridge window [mem 0x80800000-0x809fffff 64bit pref] > pci 0000:00:14.1: PCI bridge to [bus 05] > pci 0000:00:14.1: bridge window [io 0x5000-0x5fff] > pci 0000:00:14.1: bridge window [mem 0x80a00000-0x80bfffff] > pci 0000:00:14.1: bridge window [mem 0x80c00000-0x80dfffff 64bit pref] > NET: Registered protocol family 2 > TCP established hash table entries: 32768 (order: 6, 262144 bytes) > TCP bind hash table entries: 32768 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 32768 bind 32768) > UDP hash table entries: 2048 (order: 4, 65536 bytes) > UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > NET: Registered protocol family 1 > RPC: Registered named UNIX socket transport module. > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > software IO TLB [mem 0x76650000-0x7a650000] (64MB) mapped at > [ffff880076650000-ffff88007a64ffff] > microcode: CPU0 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU1 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU2 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU3 sig=0x506c9, pf=0x1, revision=0x1c > microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, > Peter Oruba > Scanning for low memory corruption every 60 seconds > Apollo Lake Sideband Interface loading > i2c adapter not found > i2c adapter not found > futex hash table entries: 1024 (order: 4, 65536 bytes) > HugeTLB registered 1 GB page size, pre-allocated 0 pages > HugeTLB registered 2 MB page size, pre-allocated 0 pages > NFS: Registering the id_resolver key type > Key type id_resolver registered > Key type id_legacy registered > aufs 4.1-20150629 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:13.0: enabling device (0104 -> 0107) > pcieport 0000:00:14.0: enabling device (0104 -> 0107) > pcieport 0000:00:14.1: enabling device (0104 -> 0107) > pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt > pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt > pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > efifb: probing for efifb > efifb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using > 8128k, total 8128k > efifb: mode is 1920x1080x32, linelength=7680, pages=1 > efifb: scrolling: redraw > efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > Console: switching to colour frame buffer device 240x67 > fb0: EFI VGA frame buffer device > input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > Linux agpgart interface v0.103 > [drm] Initialized drm 1.1.0 20060810 > [drm] Memory usable by graphics device = 4096M > fb: switching to inteldrmfb from EFI VGA > Console: switching to colour dummy device 80x25 > [drm] Replacing VGA console driver > [drm] RC6 disabled by BIOS > [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [drm] Driver supports precise vblank timestamp query. > i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1.bin failed > with error -2 > i915 0000:00:02.0: Failed to load DMC firmware [ > https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling > runtime power management. > vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes= > io+mem,decodes=io+mem:owns=io+mem > [drm] failed to retrieve link info, disabling eDP > i915 0000:00:02.0: Direct firmware load for i915/bxt_guc_ver8.bin failed > with error -2 > [drm:intel_guc_ucode_init] *ERROR* Failed to fetch GuC firmware from > i915/bxt_guc_ver8.bin (error -2) > tsc: Refined TSC clocksource calibration: 1593.615 MHz > clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x16f89566daa, > max_idle_ns: 440795280110 ns > [drm] RC6 disabled, disabling runtime PM support > IOTG i915 forklift 2016-03-25 > IOTG i915 build 2016y-05m-16d-15h-25m-52s -0700 (45c9a12) > [drm] Initialized i915 1.6.0 20160314 for 0000:00:02.0 on minor 0 > brd: module loaded > loop: module loaded > sbi_apl starting, bus 0, device d.0 > apl_gpio apl_gpio.1: Failed to attach ACPI GPIO chip > apl_gpio apl_gpio.2: Failed to attach ACPI GPIO chip > apl_gpio apl_gpio.3: Failed to attach ACPI GPIO chip > idma64 idma64.0: Found Intel integrated DMA 64-bit > idma64 idma64.1: Found Intel integrated DMA 64-bit > idma64 idma64.2: Found Intel integrated DMA 64-bit > idma64 idma64.3: Found Intel integrated DMA 64-bit > idma64 idma64.4: Found Intel integrated DMA 64-bit > idma64 idma64.5: Found Intel integrated DMA 64-bit > idma64 idma64.6: Found Intel integrated DMA 64-bit > idma64 idma64.7: Found Intel integrated DMA 64-bit > idma64 idma64.8: Found Intel integrated DMA 64-bit > dw-apb-uart.8: ttyS0 at MMIO 0xc1435000 (irq = 4, base_baud = 115200) is a > 16550A > idma64 idma64.9: Found Intel integrated DMA 64-bit > dw-apb-uart.9: ttyS1 at MMIO 0xc1437000 (irq = 5, base_baud = 115200) is a > 16550A > console [ttyS2] disabled > dw-apb-uart.10: ttyS2 at MMIO 0xc1439000 (irq = 6, base_baud = 114825) is > a 16550A > Switched to clocksource tsc > [drm] RC6 off > [drm:host2guc_action] *ERROR* GuC: host2guc action 0x6 failed. ret=-110 > status=0x00000006 response=0x00000000 > console [ttyS2] enabled > fbcon: inteldrmfb (fb0) is primary device > dw-apb-uart.11: ttyS3 at MMIO 0xc143b000 (irq = 7, base_baud = 115200) is > a 16550A > Console: switching to colour frame buffer device 240x67 > idma64 idma64.12: Found Intel integrated DMA 64-bit > pxa2xx-spi pxa2xx-spi.12: cs2 >= max 2 > pxa2xx-spi pxa2xx-spi.12: can't create new device for spidev > idma64 idma64.13: Found Intel integrated DMA 64-bit > pxa2xx-spi pxa2xx-spi.13: cs2 >= max 2 > pxa2xx-spi pxa2xx-spi.13: can't create new device for spidev > idma64 idma64.14: Found Intel integrated DMA 64-bit > ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA > mode > ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part > deso sadm sds apst > scsi host0: ahci > ata1: SATA max UDMA/133 abar m2048@0xc1449000 port 0xc1449100 irq 372 > igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k > igb: Copyright (c) 2007-2014 Intel Corporation. > pps pps0: new PPS source ptp0 > igb 0000:02:00.0: added PHC on eth0 > igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection > igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 98:4f:ee:13:bb:76 > igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF > igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) > Failed to set pin attr for GSI13 > dwc3-pci 0000:00:15.1: PCI INT B: failed to register GSI > dwc3-pci: probe of 0000:00:15.1 failed with error -1 > xhci_hcd 0000:00:15.0: xHCI Host Controller > xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 > xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks > 0x00009810 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > xhci_hcd 0000:00:15.0: xHCI Host Controller > xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 7 ports detected > usbcore: registered new interface driver usb-storage > i8042: PNP: No PS/2 controller found. Probing ports directly. > i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > ata1: SATA link down (SStatus 4 SControl 300) > i8042: No controller found > mousedev: PS/2 mouse device common for all mice > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs > i2c /dev entries driver > i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A > i801_smbus 0000:00:1f.1: PCI INT A: no GSI > genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer) > i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16 > i801_smbus 0000:00:1f.1: SMBus using polling > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > md: multipath personality registered for level -4 > md: faulty personality registered for level -5 > device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: > dm-devel(a)redhat.com > EDAC pnd2: ECC disabled on channel 0 > EDAC pnd2: Failed to register device with error -22. > Intel P-state driver initializing. > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b) > sdhci-pci 0000:00:1b.0: failed to setup card detect gpio > sdhci-pci 0000:00:1b.0: No vmmc regulator found > sdhci-pci 0000:00:1b.0: No vqmmc regulator found > mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit > sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) > sdhci-pci 0000:00:1c.0: No vmmc regulator found > sdhci-pci 0000:00:1c.0: No vqmmc regulator found > usb 1-2: new low-speed USB device number 2 using xhci_hcd > mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit > sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) > sdhci-pci 0000:00:1e.0: No vmmc regulator found > sdhci-pci 0000:00:1e.0: No vqmmc regulator found > mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > mmc1: MAN_BKOPS_EN bit is not set > mmc1: new HS400 MMC card at address 0001 > mmcblk0: mmc1:0001 CGND3R 58.2 GiB > mmcblk0boot0: mmc1:0001 CGND3R partition 1 4.00 MiB > mmcblk0boot1: mmc1:0001 CGND3R partition 2 4.00 MiB > mmcblk0rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB > usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 > microframes > usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 > microframes > input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00: > 15.0/usb1/1-2/1-2:1.0/0003:1C4F:0016.0001/input/input2 > hid-generic 0003:1C4F:0016.0001: input: USB HID v1.10 Keyboard [SIGMACHIP > USB Keyboard] on usb-0000:00:15.0-2/input0 > input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00: > 15.0/usb1/1-2/1-2:1.1/0003:1C4F:0016.0002/input/input3 > hid-generic 0003:1C4F:0016.0002: input: USB HID v1.10 Device [SIGMACHIP > USB Keyboard] on usb-0000:00:15.0-2/input1 > oprofile: using NMI interrupt. > u32 classifier > Actions configured > NET: Registered protocol family 10 > sit: IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > l2tp_core: L2TP core driver, V2.0 > l2tp_netlink: L2TP netlink interface > Key type dns_resolver registered > Btrfs loaded > console [netcon0] enabled > netconsole: network logging started > rtc_cmos 00:02: setting system clock to 2017-02-25 20:39:16 UTC > (1488055156) > snd_hda_codec_realtek hdaudioC0D0: ALC662 rev3: SKU not ready 0x00000100 > snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=3 > (0x14/0x16/0x15/0x0/0x0) type:line > snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 > snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 > snd_hda_codec_realtek hdaudioC0D0: inputs: > snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 > snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 > snd_hda_codec_realtek hdaudioC0D0: Line=0x1a > snd_hda_codec_realtek hdaudioC0D0: CD=0x1c > snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec > input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input4 > input: HDA Intel Front Mic as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input5 > input: HDA Intel Line as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input6 > input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input7 > input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input8 > input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input9 > input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input10 > input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input11 > ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: > enum_devices_done OK, num_hid_devices=4 > ALSA device list: > #0: HDA Intel at 0xc1418000 irq 379 > ttyS2 - failed to request DMA > Waiting 10 sec before mounting root device... > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6 > Please append a correct "root=" boot option; here are the available > partitions: > 0100 4096 ram0 (driver?) > 0101 4096 ram1 (driver?) > 0102 4096 ram2 (driver?) > 0103 4096 ram3 (driver?) > 0104 4096 ram4 (driver?) > 0105 4096 ram5 (driver?) > 0106 4096 ram6 (driver?) > 0107 4096 ram7 (driver?) > 0108 4096 ram8 (driver?) > 0109 4096 ram9 (driver?) > 010a 4096 ram10 (driver?) > 010b 4096 ram11 (driver?) > 010c 4096 ram12 (driver?) > 010d 4096 ram13 (driver?) > 010e 4096 ram14 (driver?) > 010f 4096 ram15 (driver?) > b300 61071360 mmcblk0 driver: mmcblk > b318 4096 mmcblk0rpmb (driver?) > b310 4096 mmcblk0boot1 (driver?) > b308 4096 mmcblk0boot0 (driver?) > VFS: Unable to mount root fs on unknown-block(0,0) > User configuration error - no valid root filesystem found > Kernel panic - not syncing: Invalid configuration from end user prevents > continuing > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.21-WR8.0.0.11_standard #1 > Hardware name: Intel Leafhill/Leafhill, BIOS APOLLOLAKE_CB_MR1_001 > 03/02/2017 > 0000000000000000 ffff88017b12fd28 ffffffff81a4568e ffffffff81eb7630 > 0000000000008001 ffff88017b12fda8 ffffffff81a438fa ffff88017b12fd48 > ffffffff00000008 ffff88017b12fdb8 ffff88017b12fd58 62306b6c62636d6d > Call Trace: > [<ffffffff81a4568e>] dump_stack+0x4f/0x65 > [<ffffffff81a438fa>] panic+0xbb/0x1d1 > [<ffffffff8214b544>] mount_block_root+0x21e/0x235 > [<ffffffff8214b76b>] mount_root+0xf1/0xfc > [<ffffffff811a69a6>] ? SyS_unlink+0x16/0x20 > [<ffffffff8214b8e3>] prepare_namespace+0x16d/0x1a6 > [<ffffffff8214b16f>] kernel_init_freeable+0x200/0x215 > [<ffffffff81a414e0>] ? rest_init+0x90/0x90 > [<ffffffff81a414ee>] kernel_init+0xe/0xf0 > [<ffffffff81a4dea2>] ret_from_fork+0x42/0x70 > [<ffffffff81a414e0>] ? rest_init+0x90/0x90 > Kernel Offset: disabled > ---[ end Kernel panic - not syncing: Invalid configuration from end user > prevents continuing > >

1 0

ASUS KGPE-D16 Automated Test Failure [master]
by Raptor Engineering Automated Coreboot Test Stand 05 Mar '17

05 Mar '17

The ASUS KGPE-D16 fails verification for branch master as of commit 03353de80b2c0604e778d81e9010af787a183ab3 The following tests failed: BOOT_FAILURE Commits since last successful test: 03353de buildgcc: Update GCC, Binutils, GMP, MPFR, GDB, IASL and LLVM See attached log for details This message was automatically generated from Raptor Engineering's ASUS KGPE-D16 test stand Want to test on your own equipment? Check out https://www.raptorengineering.com/content/REACTS/intro.html Raptor Engineering also offers coreboot consulting services! Please visit https://www.raptorengineering.com for more information Please contact Timothy Pearson at Raptor Engineering <tpearson(a)raptorengineering.com> regarding any issues stemming from this notification

1 0

New on blogs.coreboot.org: Results of the coreboot "Mailing List vs Blog" poll
by WordPress 05 Mar '17

05 Mar '17

2 1

← Newer
1
...
20
21
22
23
24
25
26
27
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2017