Author: mjones
Date: 2008-11-04 18:00:07 +0100 (Tue, 04 Nov 2008)
New Revision: 979
Modified:
coreboot-v3/arch/x86/amd/model_fxx/fidvid.c
Log:
Update K8 FID/VID setup to match coreboot v2. Add support for 100MHz FIDs
(revG).
Signed-off-by: Marc Jones <marc.jones(a)amd.com>
Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified: coreboot-v3/arch/x86/amd/model_fxx/fidvid.c
===================================================================
--- coreboot-v3/arch/x86/amd/model_fxx/fidvid.c 2008-11-02 14:47:21 UTC (rev 978)
+++ coreboot-v3/arch/x86/amd/model_fxx/fidvid.c 2008-11-04 17:00:07 UTC (rev 979)
@@ -80,59 +80,68 @@
static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
{
- /* for (cur, new) there is one <1600MHz x8 to find out next_fid */
- static const u8 next_fid_a[] = {
- /* x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 */
-/* x4 */ 0, 9, 9, 8, 9, 9, 9, 9, 9, 9, 9, 9,
-/* x5 */ 9, 0, 11, 11, 9, 9, 10, 11, 11, 11, 11, 11,
-/* x6 */ 11, 11, 0, 13, 11, 11, 11, 11, 12, 13, 13, 13,
-/* x7 */ 13, 13, 13, 0, 13, 13, 13, 13, 13, 13, 14, 15,
-/* x8 */ 4, 9, 9, 9, 0, 9, 9, 9, 9, 9, 9, 9,
-/* x9 */ 4, 5, 10, 10, 8, 0, 0, 0, 0, 0, 0, 0,
-/*x10 */ 9, 5, 11, 11, 9, 0, 0, 0, 0, 0, 0, 0,
-/*x11 */ 10, 5, 6, 12, 10, 0, 0, 0, 0, 0, 0, 0,
-/*x12 */ 11, 11, 6, 13, 11, 0, 0, 0, 0, 0, 0, 0,
-/*x13 */ 12, 12, 6, 7, 12, 0, 0, 0, 0, 0, 0, 0,
-/*x14 */ 13, 13, 13, 7, 13, 0, 0, 0, 0, 0, 0, 0,
-/*x15 */ 14, 14, 14, 7, 14, 0, 0, 0, 0, 0, 0, 0,
-/* 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC */
+
+/* CurrentFID--> 4x(00h) 5x(02h) 6x(04h) 7x(06h) ...
+ * --------------------------------------
+ * TargetFID | Next_FID, Next_FID, Next_FID, Next_FID ...
+ * | | Next_FID, Next_FID, Next_FID, Next_FID ...
+ * \|/ | Next_FID, Next_FID, Next_FID, Next_FID ...
+ */
+ static const u8 next_fid_200[] = {
+/* x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 x16 */
+/* x4 */ 0, -1, -1, -1, 0, 0, 9, 10, 11, 12, 13, 14, 15, /* 800 */
+/* x5 */ -1, 0, -1, -1, -1, 5, 5, 5, 11, 12, 13, 14, 15, /* 1000 */
+/* x6 */ -1, -1, 0, -1, -1, -1, -1, 6, 6, 6, 13, 14, 15, /* 1200 */
+/* x7 */ -1, -1, -1, 0, -1, -1, -1, -1, -1, 7, 7, 7, 15, /* 1400 */
+/* lower table to upper table boarder (table 70 and 71 in BKDG) */
+/* x8 */ 8, -1, -1, -1, 0, 8, 9, 10, 11, 12, 13, 14, 15, /* 1600 */
+/* x9 */ 9, 9, -1, -1, 9, 0, 9, 10, 11, 12, 13, 14, 15, /* 1800 */
+/*x10 */ 9, 10, -1, -1, 9, 10, 0, 10, 11, 12, 13, 14, 15, /* 2000 */
+/*x11 */ 9, 11, 11, -1, 9, 10, 11, 0, 11, 12, 13, 14, 15, /* 2200 */
+/*x12 */ 9, 11, 12, -1, 9, 10, 11, 12, 0, 12, 13, 14, 15, /* 2400 */
+/*x13 */ 9, 11, 13, 13, 9, 10, 11, 12, 13, 0, 13, 14, 15, /* 2600 */
+/*x14 */ 9, 11, 13, 14, 9, 10, 11, 12, 13, 14, 0, 14, 15, /* 2800 */
+/*x15 */ 9, 11, 13, 15, 9, 10, 11, 12, 13, 14, 15, 0, 15, /* 3000 */
+/*x15 */ 9, 11, 13, 15, 9, 10, 11, 12, 13, 14, 15, 16, 0, /* 3200 */
};
struct msr msr;
- u32 vid;
- u32 fid;
+ u32 vid_new;
+ u32 fid_new;
u32 vid_max;
u32 fid_max;
u32 vid_cur;
u32 fid_cur;
unsigned int apicidx;
- int steps;
+ int step_limit;
int loop;
apicidx = lapicid();
if (apicid != apicidx) {
- printk(BIOS_ERR,
- "wrong apicid, we want change %x, but it is %x\n", apicid, apicidx);
+ printk(BIOS_ERR,
+ "wrong apicid, we want change %x, but it is %x\n",
+ apicid, apicidx);
return fidvid;
}
- fid = (fidvid >> 8) & 0x3f;
- vid = (fidvid >> 16) & 0x3f;
+ fid_new = (fidvid >> 8) & 0x3f;
+ vid_new = (fidvid >> 16) & 0x3f;
msr = rdmsr(FIDVID_STATUS);
vid_cur = msr.hi & 0x3f;
fid_cur = msr.lo & 0x3f;
- if ((vid_cur==vid) && (fid_cur==fid))
+ if ((vid_cur == vid_new) && (fid_cur == fid_new))
return fidvid;
- vid_max = (msr.hi>>(48-32)) & 0x3f;
- fid_max = ((msr.lo>>16) & 0x3f); /* max fid */
+ vid_max = (msr.hi >> (48-32)) & 0x3f;
+ fid_max = ((msr.lo >> 16) & 0x3f); /* max fid */
+
#if FX_SUPPORT
- if (fid_max>=((25-4)*2)) { /* FX max fid is 5G */
+ if (fid_max >= ((25 - 4) * 2)) { /* FX max fid is 5G */
fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2; /* max FID is min fid + 1G */
if (fid_max >= ((25-4) * 2)) {
fid_max = (10-4) * 2; /* hard set to 2G */
@@ -141,10 +150,20 @@
#endif
/* set vid to max */
+ /* TODO - make this more correct. Not a big deal for setting max...
+ * BKDG figure 11
+ * if TargetFID > InitialFID
+ * TargetVID = FinalVID - RVO
+ * else
+ * if CurrentVID > FinalVID
+ * TargetVID = FinalVID - RVO
+ * else
+ * TargetVID = CurrentVIDD - RVO
+ */
msr.hi = 1;
msr.lo = (vid_max << 8) | (fid_cur);
#if SB_VFSMAF == 1
- msr.lo |= (1<<16); /* init changes */
+ msr.lo |= (1 << 16); /* init changes */
#endif
wrmsr(FIDVID_CTL, msr);
#if SB_VFSMAF == 0
@@ -152,38 +171,92 @@
#endif
- for (loop=0;loop<100000;loop++){
+ for (loop=0; loop < 100000; loop++){
msr = rdmsr(FIDVID_STATUS);
- if (!(msr.lo & (1<<31)))
+ if (!(msr.lo & (1 << 31)))
break;
}
vid_cur = msr.hi & 0x3f;
- steps = 8; //??
- while ((fid_cur != fid) && (steps-- > 0)) {
+ /* BKDG figure 12 and 13
+ * if current fid is odd
+ * current fid -1 (next lower and even fid)(odd fid for rev G)
+ * if current fid in high-freq table
+ * while current fid < target fid
+ * transition to next higher fid in table
+ * else if target fid > VCO portal of current fid
+ * transition to highest portal fid in higher fid table
+ * while current fid < target fid
+ * transition to next higher fid in table
+ * else
+ * transition to target fid
+ */
+ printk(BIOS_DEBUG, "Current fid_cur: 0x%x, fid_max: 0x%x\n",
+ fid_cur, fid_max);
+ printk(BIOS_DEBUG, "Requested fid_new: 0x%x\n", fid_new);
+
+ step_limit = 8; /* max 8 steps just in case... */
+ while ((fid_cur != fid_new) && (step_limit--)) {
u32 fid_temp;
- if ((fid_cur > (8-4)*2) && (fid> (8-4)*2)) {
- if (fid_cur<fid) {
+ int step;
+
+ if (fid_cur < fid_new)
+ /* Force Fid steps even. step == 0 means 100MHz step */
+ step = ((fid_new/2) - (fid_cur/2)) * 2;
+ else
+ step = ((fid_cur/2) - (fid_new/2)) * 2;
+
+ /* If 200Mhz step OR past 3200 max table value */
+ if ((step == 2) || (fid_new >= 0x18 || fid_cur >= 0x18)) {
+
+ printk(BIOS_DEBUG, "200MHZ step ");
+ /* Step +/- 200MHz at a time */
+ if (fid_cur < fid_new)
fid_temp = fid_cur + 2;
- } else {
- fid_temp = fid_cur - 2;
- }
- } else {
- /* there is one < 8, So we need to lookup the table to
- * find the fid_cur */
+ else
+ fid_temp = fid_cur - 2;
+
+
+ } else if ( step > 2) { /* If more than a 200Mhz step */
int temp;
- temp = next_fid_a[(fid_cur/2)*12+(fid/2)];
- if (temp <= 0) break;
- fid_temp = (temp-4) * 2;
+
+ /* look it up in the table */
+ printk(BIOS_DEBUG, "FidVid table step ");
+
+ temp = next_fid_200[((fid_new/2) * 13) + (fid_cur/2)];
+
+ if (temp > 0)
+ fid_temp = (temp-4) * 2; /* Table 108 */
+ else if (temp == 0)
+ fid_temp = fid_new;
+ else
+ break; /* table error */
+
+ } else { /* step < 2 (100MHZ) */
+ printk(BIOS_DEBUG, "100MHZ step ");
+
+ /* The table adjust in 200MHz increments. If requested,
+ * do the 100MHz increment if the CPU supports it.*/
+ if (cpuid_edx(0x80000007) & (1 << 6)) {
+ fid_temp = fid_cur + 1;
+ } else {
+ /* 100 MHZ not supported. Get out of the loop */
+ printk(BIOS_DEBUG, "is not supported.\n");
+ break;
+ }
}
- if (fid_temp > fid_max)
+
+ if (fid_temp > fid_max) {
+ printk(BIOS_DEBUG, "fid_temp 0x%x > fid_max 0x%x\n",
+ fid_temp, fid_max);
break;
+ }
- fid_cur = fid_temp;
+ printk(BIOS_DEBUG, "fidvid: 0x%x\n", fid_temp);
/* set target fid */
- msr.hi = (100000/5);
- msr.lo = (vid_cur << 8) | fid_cur;
+ msr.hi = 0x190; /* 2 us for AMD NPT Family 0Fh Processors */
+ msr.lo = (vid_cur << 8) | fid_temp;
#if SB_VFSMAF == 1
msr.lo |= (1 << 16); /* init changes */
#endif
@@ -207,15 +280,25 @@
#if K8_SET_FIDVID_DEBUG == 1
if (showmessage) {
- printk(BIOS_DEBUG, "status msr fid, vid %08x:%08x\n",
+ printk(BIOS_DEBUG, "status msr fid, vid %08x:%08x\n",
msr.hi, msr.lo);
}
#endif
}
/* set vid to final */
+ /* TODO - make this more correct. Not a big deal for setting max...
+ * BKDG figure 11
+ * if TargetFID > InitialFID
+ * TargetVID = FinalVID - RVO
+ * else
+ * if CurrentVID > FinalVID
+ * TargetVID = FinalVID - RVO
+ * else
+ * TargetVID = CurrentVIDD - RVO
+ */
msr.hi = 1;
- msr.lo = (vid << 8) | (fid_cur);
+ msr.lo = (vid_new << 8) | (fid_cur);
#if SB_VFSMAF == 1
msr.lo |= (1 << 16); // init changes
#endif
@@ -234,10 +317,10 @@
fidvid = (vid_cur << 16) | (fid_cur << 8);
if (showmessage) {
- if (vid!=vid_cur) {
+ if (vid_new != vid_cur) {
printk(BIOS_ERR, "set vid failed for apicid =%08x\n", apicidx);
}
- if (fid!=fid_cur) {
+ if (fid_new != fid_cur) {
printk(BIOS_ERR, "set fid failed for apicid =%08x\n",apicidx);
}
}
@@ -276,7 +359,7 @@
vid_cur = msr.hi & 0x3f;
fid_cur = msr.lo & 0x3f;
- /* set to current */
+ /* set to current */
msr.hi = 1;
msr.lo = (vid_cur << 8) | (fid_cur);
wrmsr(FIDVID_CTL, msr);
@@ -284,8 +367,8 @@
timeout = wait_cpu_state(bsp_apicid, 1);
if (timeout) {
- printk(BIOS_ERR,
- "fidvid_ap_stage1: time out while reading from BSP on %08x\n",
+ printk(BIOS_ERR,
+ "fidvid_ap_stage1: time out while reading from BSP on %08x\n",
apicid);
}
/* send signal to BSP about this AP max fid and vid */
@@ -311,10 +394,10 @@
/* send signal to BSP that this AP fid/vid is set */
/* allow to change state2 is together with apicid */
/* AP at state that We set the requested fid/vid */
- send = (apicid<<24) | (readback & 0x00ffff00);
+ send = (apicid << 24) | (readback & 0x00ffff00);
} else {
- printk(BIOS_ERR,
- "fidvid_ap_stage2: time out while reading from BSP on %08x\n",
+ printk(BIOS_ERR,
+ "fidvid_ap_stage2: time out while reading from BSP on %08x\n",
apicid);
}
@@ -322,15 +405,15 @@
timeout = wait_cpu_state(bsp_apicid, 3);
if (timeout) {
- printk(BIOS_ERR,
- "fidvid_ap_stage3: time out while reading from BSP on %08x\n",
+ printk(BIOS_ERR,
+ "fidvid_ap_stage3: time out while reading from BSP on %08x\n",
apicid);
}
}
static unsigned int calc_common_fidvid(unsigned int fidvid, unsigned int fidvidx)
{
- /* FIXME: need to check the change path to verify if it is reachable
+ /* FIXME: need to check the change path to verify if it is reachable
* when common fid is small than 1.6G */
if ((fidvid & 0xff00) <= (fidvidx & 0xff00)) {
return fidvid;
@@ -364,8 +447,8 @@
}
}
if (timeout) {
- printk(BIOS_ERR,
- "fidvid_bsp_stage1: time out while reading from ap %08x\n",
+ printk(BIOS_ERR,
+ "fidvid_bsp_stage1: time out while reading from ap %08x\n",
ap_apicid);
return;
}
@@ -401,8 +484,8 @@
}
if (timeout) {
- printk(BIOS_ERR,
- "fidvid_bsp_stage2: time out while reading from ap %08x\n",
+ printk(BIOS_ERR,
+ "fidvid_bsp_stage2: time out while reading from ap %08x\n",
ap_apicid);
return;
}
@@ -460,7 +543,7 @@
/* let all ap trains to state 1 */
lapic_write(LAPIC_MSG_REG, (bsp_apicid << 24) | 1);
- /* calculate the common max fid/vid that could be used for
+ /* calculate the common max fid/vid that could be used for
* all APs and BSP */
#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
ap_apicidx.num = 0;
