Author: stepan
Date: 2008-11-02 20:51:50 +0100 (Sun, 02 Nov 2008)
New Revision: 3721
Modified:
trunk/util/flashrom/ichspi.c
Log:
Drop nr/opcode_index parameter from run_opcode and search the opmenu for the opcode instead.
This is slightly slower (ha, ha), but works on boards with a locked opmenu. Tested on ICH7 and works.
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified: trunk/util/flashrom/ichspi.c
===================================================================
--- trunk/util/flashrom/ichspi.c 2008-11-02 17:48:20 UTC (rev 3720)
+++ trunk/util/flashrom/ichspi.c 2008-11-02 19:51:50 UTC (rev 3721)
@@ -148,7 +148,7 @@
/* Common SPI functions */
static int program_opcodes(OPCODES * op);
-static int run_opcode(uint8_t nr, OPCODE op, uint32_t offset,
+static int run_opcode(OPCODE op, uint32_t offset,
uint8_t datalength, uint8_t * data);
static int ich_spi_read_page(struct flashchip *flash, uint8_t * buf,
int offset, int maxdata);
@@ -225,7 +225,7 @@
return 0;
}
-static int ich7_run_opcode(uint8_t nr, OPCODE op, uint32_t offset,
+static int ich7_run_opcode(OPCODE op, uint32_t offset,
uint8_t datalength, uint8_t * data, int maxdata)
{
int write_cmd = 0;
@@ -233,6 +233,8 @@
uint32_t temp32 = 0;
uint16_t temp16;
uint32_t a;
+ uint64_t opmenu;
+ int opcode_index;
/* Is it a write command? */
if ((op.spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)
@@ -280,8 +282,21 @@
}
/* Select opcode */
- temp16 |= ((uint16_t) (nr & 0x07)) << 4;
+ opmenu = REGREAD32(ICH7_REG_OPMENU);
+ opmenu |= ((uint64_t)REGREAD32(ICH7_REG_OPMENU + 4)) << 32;
+ for (opcode_index=0; opcode_index<8; opcode_index++) {
+ if((opmenu & 0xff) == op.opcode) {
+ break;
+ }
+ opmenu >>= 8;
+ }
+ if (opcode_index == 8) {
+ printf_debug("Opcode %x not found.\n", op.opcode);
+ return 1;
+ }
+ temp16 |= ((uint16_t) (opcode_index & 0x07)) << 4;
+
/* Handle Atomic */
if (op.atomic != 0) {
/* Select atomic command */
@@ -328,13 +343,15 @@
return 0;
}
-static int ich9_run_opcode(uint8_t nr, OPCODE op, uint32_t offset,
+static int ich9_run_opcode(OPCODE op, uint32_t offset,
uint8_t datalength, uint8_t * data)
{
int write_cmd = 0;
int timeout;
uint32_t temp32;
uint32_t a;
+ uint64_t opmenu;
+ int opcode_index;
/* Is it a write command? */
if ((op.spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)
@@ -383,8 +400,21 @@
}
/* Select opcode */
- temp32 |= ((uint32_t) (nr & 0x07)) << (8 + 4);
+ opmenu = REGREAD32(ICH9_REG_OPMENU);
+ opmenu |= ((uint64_t)REGREAD32(ICH9_REG_OPMENU + 4)) << 32;
+ for (opcode_index=0; opcode_index<8; opcode_index++) {
+ if((opmenu & 0xff) == op.opcode) {
+ break;
+ }
+ opmenu >>= 8;
+ }
+ if (opcode_index == 8) {
+ printf_debug("Opcode %x not found.\n", op.opcode);
+ return 1;
+ }
+ temp32 |= ((uint32_t) (opcode_index & 0x07)) << (8 + 4);
+
/* Handle Atomic */
if (op.atomic != 0) {
/* Select atomic command */
@@ -431,16 +461,16 @@
return 0;
}
-static int run_opcode(uint8_t nr, OPCODE op, uint32_t offset,
+static int run_opcode(OPCODE op, uint32_t offset,
uint8_t datalength, uint8_t * data)
{
switch (flashbus) {
case BUS_TYPE_VIA_SPI:
- return ich7_run_opcode(nr, op, offset, datalength, data, 16);
+ return ich7_run_opcode(op, offset, datalength, data, 16);
case BUS_TYPE_ICH7_SPI:
- return ich7_run_opcode(nr, op, offset, datalength, data, 64);
+ return ich7_run_opcode(op, offset, datalength, data, 64);
case BUS_TYPE_ICH9_SPI:
- return ich9_run_opcode(nr, op, offset, datalength, data);
+ return ich9_run_opcode(op, offset, datalength, data);
default:
printf_debug("%s: unsupported chipset\n", __FUNCTION__);
}
@@ -453,7 +483,7 @@
{
printf_debug("ich_spi_erase_block: offset=%d, sectors=%d\n", offset, 1);
- if (run_opcode(2, curopcodes->opcode[2], offset, 0, NULL) != 0) {
+ if (run_opcode(curopcodes->opcode[2], offset, 0, NULL) != 0) {
printf_debug("Error erasing sector at 0x%x", offset);
return -1;
}
@@ -477,7 +507,7 @@
if (remaining < maxdata) {
if (run_opcode
- (1, curopcodes->opcode[1],
+ (curopcodes->opcode[1],
offset + (page_size - remaining), remaining,
&buf[page_size - remaining]) != 0) {
printf_debug("Error reading");
@@ -486,7 +516,7 @@
remaining = 0;
} else {
if (run_opcode
- (1, curopcodes->opcode[1],
+ (curopcodes->opcode[1],
offset + (page_size - remaining), maxdata,
&buf[page_size - remaining]) != 0) {
printf_debug("Error reading");
@@ -512,7 +542,7 @@
for (a = 0; a < page_size; a += maxdata) {
if (remaining < maxdata) {
if (run_opcode
- (0, curopcodes->opcode[0],
+ (curopcodes->opcode[0],
offset + (page_size - remaining), remaining,
&bytes[page_size - remaining]) != 0) {
printf_debug("Error writing");
@@ -521,7 +551,7 @@
remaining = 0;
} else {
if (run_opcode
- (0, curopcodes->opcode[0],
+ (curopcodes->opcode[0],
offset + (page_size - remaining), maxdata,
&bytes[page_size - remaining]) != 0) {
printf_debug("Error writing");
@@ -641,7 +671,7 @@
count = readcnt;
}
- if (run_opcode(opcode_index, *opcode, addr, count, data) != 0) {
+ if (run_opcode(*opcode, addr, count, data) != 0) {
printf_debug("run OPCODE 0x%02x failed\n", opcode->opcode);
return 1;
}