coreboot September 2006

coreboot@coreboot.org

52 participants
173 discussions

[LinuxBIOS] r2399 - trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a
by svn＠openbios.org 07 Sep '06

07 Sep '06

Author: rminnich Date: 2006-09-07 17:31:27 +0200 (Thu, 07 Sep 2006) New Revision: 2399 Modified: trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/failover.c Log: remove dangerous call to normal image; no backup on OLPC Modified: trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/failover.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/failover.c 2006-09-06 16:42:51 UTC (rev 2398) +++ trunk/LinuxBIOSv2/src/mainboard/olpc/rev_a/failover.c 2006-09-07 15:31:27 UTC (rev 2399) @@ -8,6 +8,7 @@ static unsigned long main(unsigned long bist) { +#if 0 /* This is the primary cpu how should I boot? */ if (do_normal_boot()) { goto normal_image; @@ -28,5 +29,6 @@ : /* clobbers */ ); fallback_image: +#endif return bist; }

1 0

[LinuxBIOS] Symposium roomate
by Richard Smith 07 Sep '06

07 Sep '06

I'm comming to the Symposium!! Woohoo. Anybody comming that wants to share a room? I'd like try and keep my expenses down to a minimum. -- Richard A. Smith

1 0

[LinuxBIOS] Need help on epia vt8601 issues
by Richard Smith 07 Sep '06

07 Sep '06

Alex Mauer did some looking into the changelog and came up with some possibilities for when the Epia vt8601 may have actually worked. Since the epia is _long_ overdue for some maintaince I spent a bit of time pulling those versions and trying to make them compile for him. Compililng old versions of V2 on a new toolchain is an exercise in frustration. I'm going to have to pull my suggestion that someone pull versions until they find the one that broke it. Its a non-trivial exercise. I had to resort to forward porting the raminit code from 1176 into the latest rev. But alas it did not work. We need a confirmed working Linuxbios rom and a dump of the northbridge settings to verify against. If anyone has machines around with older toolchains ( or machines you can install older toolchains on) we could really use some help trying to get an older rev to compile. If anyone has a toolchain that will compile anthing from r1176 to r1258 then please compile a rom for the epia and send it to Alex Mauer for testing. Please do a clean pull for each rev you try. That way we can rule out any wierdness that my happen from a rev to rev switch. Thanks. -- Richard A. Smith

5 9

[LinuxBIOS] Tyan S2466N bios request
by Jax 07 Sep '06

07 Sep '06

Hi! I want my motherboard become supported as soon as it's possible. I think there are many servers out there with this board eg. beowulf cluster computers so it's all of us interest creating a working bios. I offer my help in testing if it's safe for my computer. Thanks Regards, JaX

1 0

[LinuxBIOS] EPIA-MII 6000E 115k2, VGA and FILO on first flash
by Peter Stuge 07 Sep '06

07 Sep '06

I picked up an EPIA-MII board a while ago and some 4Mbit flash today. I put together a linuxbios.rom in a few hours, then booted LB after one hotswap flash. It is simply amazing. Thank you, everyone who have, and continue to, put effort into LinuxBIOS, FILO and Etherboot! I'll try to get the board into my car before the symposium. //Peter

2 2

[LinuxBIOS] r2398 - in trunk/LinuxBIOSv2: documentation/RFC src/drivers/pci/onboard targets/Iwill/dk8htx targets/Iwill/dk8s2 targets/advantech/som_gx533c targets/agami/aruma targets/amd/rumba targets/amd/serengeti_leopard targets/amd/solo targets/arima/hdama targets/bitworks/ims targets/broadcom/blast targets/dell/s1850 targets/eaglelion/5bcm targets/embeddedplanet/ep405pc targets/emulation/qemu-i386 targets/intel/xe7501devkit targets/lippert/frontrunner targets/motorola/sandpoint targets/newisys/khepri tar
by svn＠openbios.org 06 Sep '06

06 Sep '06

Author: stepan Date: 2006-09-06 18:42:51 +0200 (Wed, 06 Sep 2006) New Revision: 2398 Modified: trunk/LinuxBIOSv2/documentation/RFC/config.tex trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2 trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb Log: Uwe Hermann: Here's a patch which makes all "option ROM_SIZE" lines use x*y format which is a lot easier to read and modify, without having to use your brain or a calculator ;-) Tested with abuild, no errors. Modified: trunk/LinuxBIOSv2/documentation/RFC/config.tex =================================================================== --- trunk/LinuxBIOSv2/documentation/RFC/config.tex 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/documentation/RFC/config.tex 2006-09-06 16:42:51 UTC (rev 2398) @@ -173,7 +173,7 @@ target x # over-ride the default rom size in the mainboard file -option ROM_SIZE=0x100000 +option ROM_SIZE=1024*1024 mainboard amd/solo end Modified: trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c =================================================================== --- trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c 2006-09-06 16:42:51 UTC (rev 2398) @@ -20,7 +20,7 @@ in your MB mainboard Config.lb 2. add # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 in your MB targets Config.lb, afer romimage "normal" 3. create you vgabios.bin under normal bios and put that in dir that targets Config residues. # dd if=/dev/mem of=atix.rom skip=1536 count=96 Modified: trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -125,9 +125,9 @@ # romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" option USE_FALLBACK_IMAGE=0 option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) Modified: trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -10,7 +10,7 @@ option HAVE_OPTION_TABLE=1 option HAVE_MP_TABLE=1 -option ROM_SIZE=1048576 +option ROM_SIZE=1024*1024 option HAVE_FALLBACK_BOOT=1 @@ -125,9 +125,9 @@ # romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" option USE_FALLBACK_IMAGE=0 option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) Modified: trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -5,7 +5,7 @@ target som_gx533c mainboard advantech/som_gx533c -option ROM_SIZE=1024*512 +option ROM_SIZE=512*1024 option MAXIMUM_CONSOLE_LOGLEVEL=9 option DEFAULT_CONSOLE_LOGLEVEL=9 Modified: trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -15,8 +15,7 @@ option HAVE_ACPI_TABLES=1 romimage "normal" - # 512-36 k - option ROM_SIZE = 487424 + option ROM_SIZE = 512*1024-36*1024 option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x20000 option XIP_ROM_SIZE=0x20000 Modified: trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target rumba mainboard amd/rumba -option ROM_SIZE=1024*256 +option ROM_SIZE=256*1024 romimage "normal" option USE_FALLBACK_IMAGE=0 Modified: trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb =================================================================== --- trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target rumba mainboard amd/rumba -option ROM_SIZE=1024*128 +option ROM_SIZE=128*1024 option FALLBACK_SIZE=ROM_SIZE #option FALLBACK_SIZE=65535 Modified: trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # serengeti_leopard romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x13800 # option ROM_IMAGE_SIZE=0x17800 Modified: trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb =================================================================== --- trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -5,7 +5,7 @@ target solo-8mbit mainboard amd/solo -option ROM_SIZE=0x100000 +option ROM_SIZE=1024*1024 romimage "only" option USE_FALLBACK_IMAGE=1 Modified: trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb =================================================================== --- trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -64,7 +64,7 @@ option k7=1 option k8=1 -option ROM_SIZE=0x100000 +option ROM_SIZE=1024*1024 option HAVE_OPTION_TABLE=1 Modified: trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -6,7 +6,7 @@ target hdama mainboard arima/hdama -option ROM_SIZE=487424 +option ROM_SIZE=512*1024-36*1024 # Arima hdama romimage "normal" Modified: trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target ims mainboard bitworks/ims -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 romimage "normal" option USE_FALLBACK_IMAGE=0 Modified: trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -7,11 +7,11 @@ romimage "normal" # 48K for ATI rom - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x13800 # option ROM_IMAGE_SIZE=0x17800 Modified: trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -1,7 +1,7 @@ target s1850 mainboard dell/s1850 -option ROM_SIZE=0x100000 +option ROM_SIZE=1024*1024 option MAXIMUM_CONSOLE_LOGLEVEL=10 option DEFAULT_CONSOLE_LOGLEVEL=10 Modified: trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target 5bcm mainboard eaglelion/5bcm -option ROM_SIZE=1024*256 +option ROM_SIZE=256*1024 romimage "normal" option USE_FALLBACK_IMAGE=0 Modified: trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -38,7 +38,7 @@ option CONFIG_FS_FAT=1 option AUTOBOOT_CMDLINE="hda1:/vmlinuz" - option ROM_SIZE=1048576 + option ROM_SIZE=1024*1024 ## Board has fixed size RAM option EMBEDDED_RAM_SIZE=64*1024*1024 Modified: trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -3,7 +3,7 @@ target qemu-i386 mainboard emulation/qemu-i386 -option ROM_SIZE=0x40000 +option ROM_SIZE=256*1024 option CC="gcc -m32" Modified: trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -1,37 +1,37 @@ -target xe7501devkit -mainboard intel/xe7501devkit - -## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use -## (normal AND fallback images and payloads). -option ROM_SIZE = 0x30000 - -## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image, -## not including any payload. -option ROM_IMAGE_SIZE = 0x1B000 - -## FALLBACK_SIZE is the amount of the ROM the complete fallback image -## (including payload) will use -option FALLBACK_SIZE = 0 - - - -romimage "normal" - option USE_FALLBACK_IMAGE=0 -# option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" -# payload ../../../../../../../memtest86/memtest -# payload ../../../../../../../etherboot/src/bin/e1000.zelf - payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf -# payload ../../../../../../../QNX/BSP/images/qnxbasesmp.elf -end - -#NOTE: CMOS currently not supported due to conflicts with factory BIOS -# Thus no support for fallback boot. -#romimage "fallback" -# option USE_FALLBACK_IMAGE=1 -# option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" -# payload ../../../../../../../memtest86/memtest -# payload ../../../../../../../etherboot/src/bin/e1000.zelf -# payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf -#end - -buildrom ./linuxbios.rom ROM_SIZE "normal" +target xe7501devkit +mainboard intel/xe7501devkit + +## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use +## (normal AND fallback images and payloads). +option ROM_SIZE = 192*1024 + +## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image, +## not including any payload. +option ROM_IMAGE_SIZE = 0x1B000 + +## FALLBACK_SIZE is the amount of the ROM the complete fallback image +## (including payload) will use +option FALLBACK_SIZE = 0 + + + +romimage "normal" + option USE_FALLBACK_IMAGE=0 +# option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +# payload ../../../../../../../memtest86/memtest +# payload ../../../../../../../etherboot/src/bin/e1000.zelf + payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf +# payload ../../../../../../../QNX/BSP/images/qnxbasesmp.elf +end + +#NOTE: CMOS currently not supported due to conflicts with factory BIOS +# Thus no support for fallback boot. +#romimage "fallback" +# option USE_FALLBACK_IMAGE=1 +# option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +# payload ../../../../../../../memtest86/memtest +# payload ../../../../../../../etherboot/src/bin/e1000.zelf +# payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf +#end + +buildrom ./linuxbios.rom ROM_SIZE "normal" Modified: trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target frontrunner mainboard lippert/frontrunner -option ROM_SIZE=1024*256 +option ROM_SIZE=256*1024 romimage "normal" option USE_FALLBACK_IMAGE=0 Modified: trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream =================================================================== --- trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream 2006-09-06 16:42:51 UTC (rev 2398) @@ -57,7 +57,7 @@ option IDE_OFFSET=0 # ROM is 1Mb -option ROM_SIZE=1048576 +option ROM_SIZE=1024*1024 # Set stack and heap sizes (stage 2) option STACK_SIZE=0x10000 Modified: trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -17,7 +17,7 @@ option CONFIG_CONSOLE_SERIAL8250=1 # Size of the image. Khepri comes with 512k per default. -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 option HAVE_OPTION_TABLE=1 option CONFIG_ROM_STREAM=1 Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb =================================================================== --- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -3,7 +3,7 @@ target rev_a mainboard olpc/rev_a -option ROM_SIZE=1024*128*7 +option ROM_SIZE=7*128*1024 option FALLBACK_SIZE=ROM_SIZE #romimage "normal" Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -5,7 +5,7 @@ # leave 64k for vsa option CONFIG_COMPRESSED_ROM_STREAM=0 -option ROM_SIZE=1024*512-64*1024 +option ROM_SIZE=512*1024-64*1024 option FALLBACK_SIZE=ROM_SIZE option DEFAULT_CONSOLE_LOGLEVEL = 11 Modified: trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -9,13 +9,13 @@ # sunw ultra40 romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 # 64K for NIC option 48K for Raid option rom -# option ROM_SIZE = 409600 +# option ROM_SIZE = 512*1024-64*1024-48*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 Modified: trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -25,7 +25,7 @@ option IDE_OFFSET=0 # ROM is 1Mb -option ROM_SIZE=1048576 +option ROM_SIZE=1024*1024 # Set stack and heap sizes (stage 2) option STACK_SIZE=0x10000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2735 romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x11800 option XIP_ROM_SIZE=0x20000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2850 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x16000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2875 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 Modified: trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2880 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 Modified: trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2881 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2882 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x16000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2895 romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x13800 # option ROM_IMAGE_SIZE=0x17800 Modified: trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,13 +8,13 @@ # Tyan s2891 romimage "normal" # 48K for ATI ROM in 1M - option ROM_SIZE = 999424 + option ROM_SIZE = 1024*1024-48*1024 # 48K for SCSI FW or ATI ROM -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2 =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s2891 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13000 Modified: trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,13 +8,13 @@ # Tyan s2892 romimage "normal" # 48K for ATI ROM in 1M - option ROM_SIZE = 999424 + option ROM_SIZE = 1024*1024-48*1024 # 48K for SCSI FW or ATI ROM -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 Modified: trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,13 +8,13 @@ # Tyan s2895 romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 475136 +# option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 # 64K for NIC option 48K for Raid option rom -# option ROM_SIZE = 409600 +# option ROM_SIZE = 512*1024-64*1024-48*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 Modified: trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s4880 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x19000 # option ROM_IMAGE_SIZE=0x19c00 Modified: trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -8,11 +8,11 @@ # Tyan s4882 romimage "normal" # 48K for SCSI FW or ATI ROM - option ROM_SIZE = 475136 + option ROM_SIZE = 512*1024-48*1024 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 425984 +# option ROM_SIZE = 512*1024-48*1024-48*1024 # 64K for Etherboot -# option ROM_SIZE = 458752 +# option ROM_SIZE = 512*1024-64*1024 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x19000 # option ROM_IMAGE_SIZE=0x19c00 Modified: trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb =================================================================== --- trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target epia.512kflash mainboard via/epia -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 # # Via Epia Modified: trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb =================================================================== --- trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -4,7 +4,7 @@ target epia.512kflash.linuxtiny mainboard via/epia -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 option FALLBACK_SIZE=ROM_SIZE option MAXIMUM_CONSOLE_LOGLEVEL=10 option DEFAULT_CONSOLE_LOGLEVEL=10 Modified: trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb =================================================================== --- trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -7,7 +7,7 @@ option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 option HAVE_OPTION_TABLE=1 Modified: trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb =================================================================== --- trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb 2006-09-06 16:15:02 UTC (rev 2397) +++ trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb 2006-09-06 16:42:51 UTC (rev 2398) @@ -9,7 +9,7 @@ option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option ROM_SIZE=524288 +option ROM_SIZE=512*1024 option HAVE_OPTION_TABLE=1

1 0

[LinuxBIOS] LinuxBIOS+FILO hangs on qemu
by Ed Swierk 06 Sep '06

06 Sep '06

Hello, I'm trying to boot Linux on qemu (0.8.2) with LinuxBIOSv2 (svn 2394) and FILO (0.5). I built filo.elf, ran buildtarget emulation/qemu-i386, changed Config.lb to use filo.elf as the payload, and built LinuxBIOS. I then copied the resulting qemu-bios.rom to bios.bin, and started qemu with the -L option to use this bios.bin, and -nographic to use the serial console. When I try to boot a 2.6 bzImage kernel (using diskboot.img from Fedora), FILO gets as far as "Jumping to entry point..." and then hangs: ----- > qemu -L ~ -hda diskboot.img -m 256 -nographic -no-kqemu -d in_asm,exec (qemu) LinuxBIOS-1.1.8-FILO Mon Sep 4 10:07:27 PDT 2006 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.8-FILO Mon Sep 4 11:01:19 PDT 2006 booting... Enumerating buses... Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [8086/1237] enabled PCI: 00:01.0 [8086/7000] enabled PCI: 00:01.1 [8086/7010] enabled PCI: 00:01.3 [8086/7113] enabled PCI: 00:02.0 [1013/00b8] enabled PCI: 00:03.0 [10ec/8029] enabled PCI: pci_scan_bus returning with max=00 done Allocating resources... Reading resources... Done reading resources. Setting resources... PCI: 00:01.1 20 <- [0x0000001400 - 0x000000140f] io PCI: 00:02.0 10 <- [0x00fc000000 - 0x00fdffffff] prefmem PCI: 00:02.0 14 <- [0x00fe000000 - 0x00fe000fff] mem PCI: 00:03.0 10 <- [0x0000001000 - 0x00000010ff] io Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 subsystem <- 00/00 PCI: 00:00.0 cmd <- 140 PCI: 00:01.0 subsystem <- 00/00 PCI: 00:01.0 cmd <- 147 PCI: 00:01.1 cmd <- 141 PCI: 00:01.3 cmd <- 140 PCI: 00:02.0 cmd <- 143 PCI: 00:03.0 cmd <- 141 done. Initializing devices... Root Device init PCI: 00:00.0 init PCI: 00:01.0 init PCI: 00:01.1 init PCI: 00:01.3 init PCI: 00:02.0 init PCI: 00:03.0 init Devices initialized Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000b74 checksum 841b Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffe0000 - 0xfffeffff Found ELF candiate at offset 0 New segment addr 0x100000 size 0x236e0 offset 0xc0 filesize 0x9748 (cleaned up) New segment addr 0x100000 size 0x236e0 offset 0xc0 filesize 0x9748 New segment addr 0x1236e0 size 0x48 offset 0x9820 filesize 0x48 (cleaned up) New segment addr 0x1236e0 size 0x48 offset 0x9820 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000000236e0 filesz: 0x0000000000009748 Clearing Segment: addr: 0x0000000000109748 memsz: 0x0000000000019f98 Loading Segment: addr: 0x00000000001236e0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x106924 FILO version 0.5 (eswierk(a)bianchi.arastra.com) Mon Sep 4 11:00:39 PDT 2006 collect_sys_info: boot eax = 0xe1fb007 collect_sys_info: boot ebx = 0x3ff77a0 collect_sys_info: boot arg = 0x3ff77a0 malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks) malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks) collect_elfboot_info: Bootloader: elfboot collect_elfboot_info: Version: 1.3 malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks) collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found canidate at: 00000530 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000530 malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks) convert_memmap: 0x00000000000000 0x00000000000bdc 16 convert_memmap: 0x00000000000bdc 0x0000000009f424 1 convert_memmap: 0x000000000c0000 0x00000000030000 1 convert_memmap: 0x000000000f0000 0x00000003f10000 1 convert_memmap: 0x000000000f0000 0x00000000000000 16 collect_sys_info: 0000000000000bdc-00000000000a0000 collect_sys_info: 00000000000c0000-00000000000f0000 collect_sys_info: 00000000000f0000-0000000004000000 collect_sys_info: RAM 64 MB relocate: Current location: 0x100000-0x123727 relocate: Relocating to 0x3fdc8d0-0x3fffff7... ok setup_timers: CPU 797 MHz pci_init: Scanning PCI: found 6 devices malloc_diag: alloc: 208 bytes (4 blocks), free: 16168 bytes (1 blocks) pci_init: 00:00.0 8086:1237 0600 00 pci_init: 00:01.0 8086:7000 0601 00 pci_init: 00:01.1 8086:7010 0101 80 pci_init: 00:01.3 8086:7113 0680 00 pci_init: 00:02.0 1013:00b8 0300 00 pci_init: 00:03.0 10ec:8029 0200 00 Press <Enter> for default boot, or <Esc> for boot prompt... timed out boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200 malloc_diag: alloc: 280 bytes (5 blocks), free: 16096 bytes (1 blocks) malloc_diag: alloc: 296 bytes (6 blocks), free: 16080 bytes (1 blocks) file_open: dev=hda1, path=/vmlinuz find_ide_controller: found PCI IDE controller 8086:7010 prog_if=0x80 find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=16384 init_drive: LBA48 mode, sectors=16384 init_drive: Init device params... ok hda: LBA48 8192KB: QEMU HARDDISK devopen: Partition 1 start 3020518592 length 506638 Disk read error dev=1 drive=0 sector=3020518592 devread: read sector failed Disk read error dev=1 drive=0 sector=3020518594 devread: read sector failed Disk read error dev=1 drive=0 sector=3020518720 devread: read sector failed Disk read error dev=1 drive=0 sector=3020518608 devread: read sector failed Disk read error dev=1 drive=0 sector=3020518656 devread: read sector failed Unknown filesystem type malloc_diag: alloc: 280 bytes (5 blocks), free: 16096 bytes (1 blocks) malloc_diag: alloc: 208 bytes (4 blocks), free: 16168 bytes (1 blocks) boot: hda:/vmlinuz console=ttyS0 malloc_diag: alloc: 248 bytes (5 blocks), free: 16128 bytes (1 blocks) malloc_diag: alloc: 264 bytes (6 blocks), free: 16112 bytes (1 blocks) file_open: dev=hda, path=/vmlinuz Mounted fat malloc_diag: alloc: 248 bytes (5 blocks), free: 16128 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 264 bytes (6 blocks), free: 16112 bytes (1 blocks) file_open: dev=hda, path=/vmlinuz devopen: already open malloc_diag: alloc: 248 bytes (5 blocks), free: 16128 bytes (1 blocks) Found Linux version 2.6.15-1.2054_FC5 (bhcompile(a)hs20-bc1-2.build.redhat.com) #1 Tue Mar 14 15:48:03 EST 2006 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000000bdc - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 00000000000f0000 - 0000000004000000 set_memory_size: ramtop=0x4000000 set_memory_size: ext_mem_k=64512, alt_mem_k=64512 parse_command_line: original command line: "console=ttyS0" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (13 bytes): "console=ttyS0" load_linux_kernel: offset=0x2000 addr=0x100000 size=0x16d7f5 Loading kernel... ok start_linux: eip=0x100000 Jumping to entry point... ----- At this point, even qemu becomes unresponsive, so it's hard to figure out exactly what it's doing while running in a tight loop. The last entry in the qemu debug log file is the "Load new stack segment with new GDT" movl instruction in __switch_context: ----- 0x03fe3213: pop %ebx 0x03fe3214: sub $0x106943,%ebx 0x03fe321a: cli 0x03fe321b: mov %esp,%esi 0x03fe321d: sub %ebx,%esi 0x03fe321f: xchg %esi,0x109700(%ebx) 0x03fe3225: add %ebx,%esi 0x03fe3227: movzwl (%esi),%edx 0x03fe322a: mov 0x14(%esi),%eax 0x03fe322d: lgdtl 0x2(%esi) 0x03fe3231: mov %edx,%ss ----- I've also tried an older qemu (0.7.2), an older LinuxBIOS (svn 2302) and an older kernel (2.4.something from Fedora Core 1), all with the same result. Any suggestions would be appreciated. --Ed

7 18

[LinuxBIOS] r2397 - in trunk/LinuxBIOSv2/src/superio/ite: . it8705f
by svn＠openbios.org 06 Sep '06

06 Sep '06

Author: stepan Date: 2006-09-06 18:15:02 +0200 (Wed, 06 Sep 2006) New Revision: 2397 Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/ trunk/LinuxBIOSv2/src/superio/ite/it8705f/Config.lb trunk/LinuxBIOSv2/src/superio/ite/it8705f/chip.h trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f.h trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f_early_serial.c trunk/LinuxBIOSv2/src/superio/ite/it8705f/superio.c Log: Add support for ITE it8705f from Uwe Hermann Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/superio/ite/it8705f/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/superio/ite/it8705f/Config.lb 2006-09-06 16:15:02 UTC (rev 2397) @@ -0,0 +1,2 @@ +config chip.h +object superio.o Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/superio/ite/it8705f/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/superio/ite/it8705f/chip.h 2006-09-06 16:15:02 UTC (rev 2397) @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SUPERIO_ITE_IT8705F +#define _SUPERIO_ITE_IT8705F + +/* This chip doesn't seem to have keyboard and mouse support. */ + +#include <uart8250.h> + +extern struct chip_operations superio_ITE_it8705f_ops; + +struct superio_ITE_it8705f_config { + struct uart8250 com1, com2; +}; + +#endif /* _SUPERIO_ITE_IT8705F */ + Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f.h =================================================================== --- trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f.h (rev 0) +++ trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f.h 2006-09-06 16:15:02 UTC (rev 2397) @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8705_2.asp */ +/* Status: untested on real hardware, but it compiles. */ +/* Note: This should also work on an IT8705AF, they're almost the same. */ + +/* This chip doesn't seem to have keyboard and mouse support. */ + +#define IT8705F_FDC 0x00 /* Floppy */ +#define IT8705F_SP1 0x01 /* Com1 */ +#define IT8705F_SP2 0x02 /* Com2 */ +#define IT8705F_PP 0x03 /* Parallel port */ +#define IT8705F_EC 0x04 /* Environment controller */ +#define IT8705F_GPIO 0x05 /* GPIO */ +#define IT8705F_GAME 0x06 /* GAME port */ +#define IT8705F_IR 0x07 /* Consumer IR */ +#define IT8705F_MIDI 0x08 /* MIDI port */ + Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f_early_serial.c =================================================================== --- trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f_early_serial.c (rev 0) +++ trunk/LinuxBIOSv2/src/superio/ite/it8705f/it8705f_early_serial.c 2006-09-06 16:15:02 UTC (rev 2397) @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/romcc_io.h> +#include "it8705f.h" + +/* The base address is 0x2e or 0x4e, depending on config bytes. */ +#define SIO_BASE 0x2e +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global Configuration Registers. */ +#define IT8705F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8705F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8705F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ + +/* WTF? 0x23 and 0x24 are swapped here (when compared to other IT87xx). */ +#define IT8705F_CONFIG_REG_CLOCKSEL 0x24 /* Clock Selection. */ +#define IT8705F_CONFIG_REG_SWSUSP 0x23 /* Software Suspend, Flash I/F. */ + +#define IT8705F_CONFIGURATION_PORT 0x2e /* Write-only. */ + +/* The content of IT8705F_CONFIG_REG_LDN (index 0x07) must be set to the + * LDN the register belongs to, before you can access the register. */ +static void it8705f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(IT8705F_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +/* Enable the peripheral devices on the IT8705F Super IO chip. */ +static void it8705f_enable_serial(device_t dev, unsigned iobase) +{ + /* (1) Enter the configuration state (MB PnP mode). */ + + /* Perform MB PnP setup to put the SIO chip at 0x2e. */ + /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ + /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ + outb(0x87, IT8705F_CONFIGURATION_PORT); + outb(0x01, IT8705F_CONFIGURATION_PORT); + outb(0x55, IT8705F_CONFIGURATION_PORT); + outb(0x55, IT8705F_CONFIGURATION_PORT); + + /* (2) Modify the data of configuration registers. */ + + /* Select the chip to configure (if there's more than one). + * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. + * If this register is not written, both chips are configured. */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CONFIGSEL, 0x00); */ + + /* Enable all devices. */ + it8705f_sio_write(IT8705F_FDC, 0x30, 0x1); /* Floppy */ + it8705f_sio_write(IT8705F_SP1, 0x30, 0x1); /* Serial port 1 */ + it8705f_sio_write(IT8705F_SP2, 0x30, 0x1); /* Serial port 2 */ + it8705f_sio_write(IT8705F_PP, 0x30, 0x1); /* Parallel port */ + it8705f_sio_write(IT8705F_EC, 0x30, 0x1); /* Environment controller */ + /* GPIO */ + it8705f_sio_write(IT8705F_GAME, 0x30, 0x1); /* GAME port */ + it8705f_sio_write(IT8705F_IR, 0x30, 0x1); /* Consumer IR */ + it8705f_sio_write(IT8705F_MIDI, 0x30, 0x1); /* MIDI port */ + + /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CLOCKSEL, 0x00); */ + + /* Clear software suspend mode (clear bit 0). TODO: Needed? */ + /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_SWSUSP, 0x00); */ + + /* (3) Exit the configuration state (MB PnP mode). */ + it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CC, 0x02); +} + Added: trunk/LinuxBIOSv2/src/superio/ite/it8705f/superio.c =================================================================== --- trunk/LinuxBIOSv2/src/superio/ite/it8705f/superio.c (rev 0) +++ trunk/LinuxBIOSv2/src/superio/ite/it8705f/superio.c 2006-09-06 16:15:02 UTC (rev 2397) @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This chip doesn't seem to have keyboard and mouse support. */ + +#include <uart8250.h> +#include "chip.h" +#include "it8705f.h" + +static void init(device_t dev) +{ + struct superio_ITE_it8705f_config *conf; + struct resource *res0, *res1; + + if (!dev->enabled) { + return; + } + + conf = dev->chip_info; + + switch (dev->path.u.pnp.device) { + case IT8705F_FDC: /* TODO. */ + break; + case IT8705F_SP1: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com1); + break; + case IT8705F_SP2: + res0 = find_resource(dev, PNP_IDX_IO0); + init_uart8250(res0->base, &conf->com2); + break; + case IT8705F_PP: /* TODO. */ + break; + case IT8705F_EC: /* TODO. */ + break; + case IT8705F_GPIO: /* TODO. */ + break; + case IT8705F_GAME: /* TODO. */ + break; + case IT8705F_IR: /* TODO. */ + break; + case IT8705F_MIDI: /* TODO. */ + break; + } +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = pnp_set_resources, + .enable_resources = pnp_enable_resources, + .enable = pnp_enable, + .init = init, +}; + +/* TODO: FDC, PP, EC, GPIO, GAME, IR, MIDI. */ +static struct pnp_info pnp_dev_info[] = { + { &ops, IT8705F_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, IT8705F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, }, +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &pnp_ops, + sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); +} + +struct chip_operations superio_ITE_it8705f_ops = { + CHIP_NAME("ITE it8705f") + .enable_dev = enable_dev, +}; +

1 0

[LinuxBIOS] IT8716F support.
by Uwe Hermann 06 Sep '06

06 Sep '06

Hi, here's code for the IT8716F, untested as always. The patch also includes some smaller cosmetic fixes... Uwe. -- Uwe Hermann http://www.hermann-uwe.de http://www.it-services-uh.de | http://www.crazy-hacks.org http://www.holsham-traders.de | http://www.unmaintained-free-software.org

2 1

[LinuxBIOS] PATCH: flashrom support for all ICH chipsets.
by Uwe Hermann 06 Sep '06

06 Sep '06

Hi, I've added support in flashrom for all ICH chipsets (maybe I missed one or two; if so, please tell me). Tested on real hardware: ICH2, ICH6-M (the rest is untested). HTH, Uwe. -- Uwe Hermann http://www.hermann-uwe.de http://www.it-services-uh.de | http://www.crazy-hacks.org http://www.holsham-traders.de | http://www.unmaintained-free-software.org

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot September 2006