[LinuxBIOS] r2398 - in trunk/LinuxBIOSv2: documentation/RFC src/drivers/pci/onboard targets/Iwill/dk8htx targets/Iwill/dk8s2 targets/advantech/som_gx533c targets/agami/aruma targets/amd/rumba targets/amd/serengeti_leopard targets/amd/solo targets/arima/hdama targets/bitworks/ims targets/broadcom/blast targets/dell/s1850 targets/eaglelion/5bcm targets/embeddedplanet/ep405pc targets/emulation/qemu-i386 targets/intel/xe7501devkit targets/lippert/frontrunner targets/motorola/sandpoint targets/newisys/khepri tar

Author: stepan
Date: 2006-09-06 18:42:51 +0200 (Wed, 06 Sep 2006)
New Revision: 2398

Modified:
   trunk/LinuxBIOSv2/documentation/RFC/config.tex
   trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c
   trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb
   trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb
   trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb
   trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb
   trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb
   trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb
   trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb
   trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb
   trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb
   trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb
   trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb
   trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb
   trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb
   trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb
   trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb
   trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb
   trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb
   trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb
   trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream
   trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb
   trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb
   trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb
   trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb
   trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2
   trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb
   trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb
   trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb
   trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb
   trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb
   trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb
Log:
Uwe Hermann:
Here's a patch which makes all "option ROM_SIZE" lines use x*y format
which is a lot easier to read and modify, without having to use your
brain or a calculator ;-)

Tested with abuild, no errors.

Modified: trunk/LinuxBIOSv2/documentation/RFC/config.tex
===================================================================
--- trunk/LinuxBIOSv2/documentation/RFC/config.tex	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/documentation/RFC/config.tex	2006-09-06 16:42:51 UTC (rev 2398)
@@ -173,7 +173,7 @@
 target x

# over-ride the default rom size in the mainboard file
-option ROM_SIZE=0x100000
+option ROM_SIZE=1024*1024
 mainboard amd/solo
 end

Modified: trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c
===================================================================
--- trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/src/drivers/pci/onboard/onboard.c	2006-09-06 16:42:51 UTC (rev 2398)
@@ -20,7 +20,7 @@
    in your MB mainboard Config.lb
    2. add 
    	#       48K for SCSI FW or ATI ROM
-		        option ROM_SIZE = 475136
+		        option ROM_SIZE = 512*1024-48*1024
    in your MB targets Config.lb, afer romimage "normal"
    3. create you vgabios.bin under normal bios and put that in dir that targets Config residues.
    	# dd if=/dev/mem of=atix.rom skip=1536 count=96

Modified: trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/Iwill/dk8htx/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -125,9 +125,9 @@
 # 
 romimage "normal"
 #	48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #	48K for SCSI FW and 48K for ATI ROM
-#	option ROM_SIZE = 425984  
+#        option ROM_SIZE = 512*1024-48*1024-48*1024
         option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
    option USE_FALLBACK_IMAGE=0
    option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)

Modified: trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/Iwill/dk8s2/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -10,7 +10,7 @@

option HAVE_OPTION_TABLE=1
 option HAVE_MP_TABLE=1
-option ROM_SIZE=1048576
+option ROM_SIZE=1024*1024

option HAVE_FALLBACK_BOOT=1

@@ -125,9 +125,9 @@
 # 
 romimage "normal"
 #	48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #	48K for SCSI FW and 48K for ATI ROM
-#	option ROM_SIZE = 425984  
+#	option ROM_SIZE = 512*1024-48*1024-48*1024
         option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
    option USE_FALLBACK_IMAGE=0
    option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)

Modified: trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/advantech/som_gx533c/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -5,7 +5,7 @@
 target som_gx533c
 mainboard advantech/som_gx533c

-option ROM_SIZE=1024*512
+option ROM_SIZE=512*1024

option MAXIMUM_CONSOLE_LOGLEVEL=9
 option DEFAULT_CONSOLE_LOGLEVEL=9

Modified: trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/agami/aruma/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -15,8 +15,7 @@
 option HAVE_ACPI_TABLES=1

romimage "normal"
-	# 512-36 k
-        option ROM_SIZE = 487424 
+        option ROM_SIZE = 512*1024-36*1024
    option USE_FALLBACK_IMAGE=0
    option ROM_IMAGE_SIZE=0x20000
    option XIP_ROM_SIZE=0x20000

Modified: trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/amd/rumba/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target rumba
 mainboard amd/rumba

-option ROM_SIZE=1024*256
+option ROM_SIZE=256*1024

romimage "normal"
    option USE_FALLBACK_IMAGE=0

Modified: trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/amd/rumba/Config.nofallback.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target rumba
 mainboard amd/rumba

-option ROM_SIZE=1024*128
+option ROM_SIZE=128*1024
 option FALLBACK_SIZE=ROM_SIZE
 #option FALLBACK_SIZE=65535

Modified: trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/amd/serengeti_leopard/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # serengeti_leopard
 romimage "normal"
 #       48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x13800
 #	option ROM_IMAGE_SIZE=0x17800

Modified: trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/amd/solo/Config-8MBit.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -5,7 +5,7 @@
 target solo-8mbit
 mainboard amd/solo

-option ROM_SIZE=0x100000
+option ROM_SIZE=1024*1024

romimage "only" 
    option USE_FALLBACK_IMAGE=1

Modified: trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/arima/hdama/Config.kernelimage.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -64,7 +64,7 @@
 option k7=1
 option k8=1

-option ROM_SIZE=0x100000
+option ROM_SIZE=1024*1024

option HAVE_OPTION_TABLE=1

Modified: trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/arima/hdama/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -6,7 +6,7 @@
 target hdama
 mainboard arima/hdama

-option ROM_SIZE=487424
+option ROM_SIZE=512*1024-36*1024

# Arima hdama
 romimage "normal"

Modified: trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/bitworks/ims/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target ims
 mainboard bitworks/ims

-option ROM_SIZE=524288
+option ROM_SIZE=512*1024

romimage "normal"
    option USE_FALLBACK_IMAGE=0

Modified: trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/broadcom/blast/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -7,11 +7,11 @@

romimage "normal"
 #       48K for ATI rom
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#       option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x13800
 #	option ROM_IMAGE_SIZE=0x17800

Modified: trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/dell/s1850/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -1,7 +1,7 @@
 target s1850
 mainboard dell/s1850

-option ROM_SIZE=0x100000
+option ROM_SIZE=1024*1024
 option MAXIMUM_CONSOLE_LOGLEVEL=10
 option DEFAULT_CONSOLE_LOGLEVEL=10

Modified: trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/eaglelion/5bcm/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target 5bcm
 mainboard eaglelion/5bcm

-option ROM_SIZE=1024*256
+option ROM_SIZE=256*1024

romimage "normal"
    option USE_FALLBACK_IMAGE=0

Modified: trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/embeddedplanet/ep405pc/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -38,7 +38,7 @@
         option CONFIG_FS_FAT=1
         option AUTOBOOT_CMDLINE="hda1:/vmlinuz"

-        option ROM_SIZE=1048576
+        option ROM_SIZE=1024*1024

## Board has fixed size RAM
         option EMBEDDED_RAM_SIZE=64*1024*1024

Modified: trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/emulation/qemu-i386/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -3,7 +3,7 @@
 target qemu-i386
 mainboard emulation/qemu-i386

-option ROM_SIZE=0x40000
+option ROM_SIZE=256*1024

option CC="gcc -m32"

Modified: trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/intel/xe7501devkit/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -1,37 +1,37 @@
-target xe7501devkit
-mainboard intel/xe7501devkit
-
-## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
-## (normal AND fallback images and payloads).
-option ROM_SIZE = 0x30000
-
-## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
-## not including any payload.
-option ROM_IMAGE_SIZE = 0x1B000
-
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image 
-## (including payload) will use
-option FALLBACK_SIZE = 0
-
-
-
-romimage "normal"
-	option USE_FALLBACK_IMAGE=0
-#	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
-#       payload ../../../../../../../memtest86/memtest
-#       payload ../../../../../../../etherboot/src/bin/e1000.zelf
-        payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf
-#       payload ../../../../../../../QNX/BSP/images/qnxbasesmp.elf
-end
-
-#NOTE: CMOS currently not supported due to conflicts with factory BIOS
-#      Thus no support for fallback boot.
-#romimage "fallback" 
-#	option USE_FALLBACK_IMAGE=1
-#	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
-#       payload ../../../../../../../memtest86/memtest
-#       payload ../../../../../../../etherboot/src/bin/e1000.zelf
-#       payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf
-#end
-
-buildrom ./linuxbios.rom ROM_SIZE "normal"
+target xe7501devkit
+mainboard intel/xe7501devkit
+
+## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
+## (normal AND fallback images and payloads).
+option ROM_SIZE = 192*1024
+
+## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
+## not including any payload.
+option ROM_IMAGE_SIZE = 0x1B000
+
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image 
+## (including payload) will use
+option FALLBACK_SIZE = 0
+
+
+
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+#	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+#       payload ../../../../../../../memtest86/memtest
+#       payload ../../../../../../../etherboot/src/bin/e1000.zelf
+        payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf
+#       payload ../../../../../../../QNX/BSP/images/qnxbasesmp.elf
+end
+
+#NOTE: CMOS currently not supported due to conflicts with factory BIOS
+#      Thus no support for fallback boot.
+#romimage "fallback" 
+#	option USE_FALLBACK_IMAGE=1
+#	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+#       payload ../../../../../../../memtest86/memtest
+#       payload ../../../../../../../etherboot/src/bin/e1000.zelf
+#       payload ../../../../../../../etherboot/src/bin/e1000--filo.zelf
+#end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal"

Modified: trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/lippert/frontrunner/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target frontrunner
 mainboard lippert/frontrunner

-option ROM_SIZE=1024*256
+option ROM_SIZE=256*1024

romimage "normal"
    option USE_FALLBACK_IMAGE=0

Modified: trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream
===================================================================
--- trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/motorola/sandpoint/Config.lb.ide_stream	2006-09-06 16:42:51 UTC (rev 2398)
@@ -57,7 +57,7 @@
 option IDE_OFFSET=0

# ROM is 1Mb
-option ROM_SIZE=1048576
+option ROM_SIZE=1024*1024

# Set stack and heap sizes (stage 2)
 option STACK_SIZE=0x10000

Modified: trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/newisys/khepri/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -17,7 +17,7 @@
 option  CONFIG_CONSOLE_SERIAL8250=1

# Size of the image. Khepri comes with 512k per default.
-option ROM_SIZE=524288
+option ROM_SIZE=512*1024

option HAVE_OPTION_TABLE=1
 option CONFIG_ROM_STREAM=1

Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.kernel.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -3,7 +3,7 @@
 target rev_a
 mainboard olpc/rev_a

-option ROM_SIZE=1024*128*7
+option ROM_SIZE=7*128*1024
 option FALLBACK_SIZE=ROM_SIZE

#romimage "normal"

Modified: trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/olpc/rev_a/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -5,7 +5,7 @@

# leave 64k for vsa
 option CONFIG_COMPRESSED_ROM_STREAM=0
-option ROM_SIZE=1024*512-64*1024
+option ROM_SIZE=512*1024-64*1024
 option FALLBACK_SIZE=ROM_SIZE

option DEFAULT_CONSOLE_LOGLEVEL = 11

Modified: trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/sunw/ultra40/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -9,13 +9,13 @@
 # sunw ultra40
 romimage "normal"
 #       48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#        option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
 #	64K for NIC option 48K for Raid option rom
-#	option ROM_SIZE = 409600
+#	option ROM_SIZE = 512*1024-64*1024-48*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13800

Modified: trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/totalimpact/briq/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -25,7 +25,7 @@
 option IDE_OFFSET=0

# ROM is 1Mb
-option ROM_SIZE=1048576
+option ROM_SIZE=1024*1024

# Set stack and heap sizes (stage 2)
 option STACK_SIZE=0x10000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2735/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2735
 romimage "normal"
 #       48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
         option ROM_IMAGE_SIZE=0x11800
         option XIP_ROM_SIZE=0x20000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2850/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2850
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x16000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2875/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2875
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13800

Modified: trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2880/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2880
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#        option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13800

Modified: trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2881/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2881
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#        option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #        option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2882/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2882
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#        option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #        option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x16000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2885/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2895
 romimage "normal"
 #       48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x13800
 #	option ROM_IMAGE_SIZE=0x17800

Modified: trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,13 +8,13 @@
 # Tyan s2891
 romimage "normal"
 #       48K for ATI ROM in 1M
-	option ROM_SIZE = 999424
+	option ROM_SIZE = 1024*1024-48*1024
 #       48K for SCSI FW or ATI ROM
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #        option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2891/Config.lb.com2	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s2891
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #        option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13000

Modified: trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2892/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,13 +8,13 @@
 # Tyan s2892
 romimage "normal"
 #       48K for ATI ROM in 1M
-        option ROM_SIZE = 999424
+        option ROM_SIZE = 1024*1024-48*1024
 #       48K for SCSI FW or ATI ROM
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13800

Modified: trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s2895/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,13 +8,13 @@
 # Tyan s2895
 romimage "normal"
 #       48K for SCSI FW
-#        option ROM_SIZE = 475136
+#        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
 #	64K for NIC option 48K for Raid option rom
-#	option ROM_SIZE = 409600
+#	option ROM_SIZE = 512*1024-64*1024-48*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x11800
 #	option ROM_IMAGE_SIZE=0x13800

Modified: trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s4880/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s4880
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x19000
 #	option ROM_IMAGE_SIZE=0x19c00

Modified: trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/tyan/s4882/Config.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -8,11 +8,11 @@
 # Tyan s4882
 romimage "normal"
 #       48K for SCSI FW or ATI ROM
-        option ROM_SIZE = 475136
+        option ROM_SIZE = 512*1024-48*1024
 #       48K for SCSI FW and 48K for ATI ROM
-#       option ROM_SIZE = 425984 
+#       option ROM_SIZE = 512*1024-48*1024-48*1024
 #       64K for Etherboot
-#        option ROM_SIZE = 458752 
+#        option ROM_SIZE = 512*1024-64*1024
    option USE_FALLBACK_IMAGE=0
 #	option ROM_IMAGE_SIZE=0x19000
 #	option ROM_IMAGE_SIZE=0x19c00

Modified: trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target epia.512kflash
 mainboard via/epia

-option ROM_SIZE=524288
+option ROM_SIZE=512*1024

#
 # Via Epia

Modified: trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/via/epia/Config.512kflash.linuxtiny.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -4,7 +4,7 @@
 target epia.512kflash.linuxtiny
 mainboard via/epia

-option ROM_SIZE=524288
+option ROM_SIZE=512*1024
 option FALLBACK_SIZE=ROM_SIZE
 option MAXIMUM_CONSOLE_LOGLEVEL=10
 option DEFAULT_CONSOLE_LOGLEVEL=10

Modified: trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/via/epia-m/Config-abuild.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -7,7 +7,7 @@
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1

-option ROM_SIZE=524288
+option ROM_SIZE=512*1024

option HAVE_OPTION_TABLE=1

Modified: trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb	2006-09-06 16:15:02 UTC (rev 2397)
+++ trunk/LinuxBIOSv2/targets/via/epia-m/Config.512kflash.lb	2006-09-06 16:42:51 UTC (rev 2398)
@@ -9,7 +9,7 @@
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1

-option ROM_SIZE=524288
+option ROM_SIZE=512*1024

option HAVE_OPTION_TABLE=1