questions about Rangerley

[Jack Zhao]

Hi Mr. Coreboot J

I am a software engineer. And I am studying the coreboot with a new
project which will use the CPU Intel Rangerley. But from the supported list,
I cannot find it. Could you please tell me how I can see that? Or you can
share with me some link about it. Thanks very much for support in advance.

Best Regards,

Jack Zhao

[phone]-81122

[Martin Roth]

Hi Jack,
   The Rangeley processor is supported by coreboot.  The intel/mohonpeak 
is the reference board.

You will need to download the FSP from http://intel.com/fsp

While there isn't a platform guide for rangeley yet, you would follow 
similar steps to setting up coreboot for the baytrail platform, so grab 
that platform guide from the fsp site.  I believe it should answer most 
of your questions.

Please note that the graphics card delivered with the mohon peak board 
is NOT compatible with SeaBIOS.  This is an issue with the video bios on 
that particular graphics card.

Also, if this is for a commercial project, you may be interested in 
Sage's Rangeley BSP. 
http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/

Martin

On 12/04/2014 01:07 AM, Jack Zhao wrote:
> Hi Mr. Coreboot J
>
> I am a software engineer. And I am studying the coreboot with a new 
> project which will use the CPU Intel Rangerley. But from the supported 
> list, I cannot find it. Could you please tell me how I can see that? 
> Or you can share with me some link about it. Thanks very much for 
> support in advance.
>
> Best Regards,
>
> Jack Zhao
>
> [phone]-81122

Hi Martin,

I am kinda have this graphic card issue when porting coreboot to this MohonPeak CRB, would you please advice any of the supported graphic card? or is there any clue or document about how to support such graphic card with seaBios?

thanks

May

From: Martin Roth
Date: 2014-12-05 12:00
To: Jack Zhao; coreboot
Subject: Re: [coreboot] questions about Rangerley
Hi Jack,
   The Rangeley processor is supported by coreboot.  The intel/mohonpeak 
is the reference board.

You will need to download the FSP from http://intel.com/fsp

While there isn't a platform guide for rangeley yet, you would follow 
similar steps to setting up coreboot for the baytrail platform, so grab 
that platform guide from the fsp site.  I believe it should answer most 
of your questions.

Please note that the graphics card delivered with the mohon peak board 
is NOT compatible with SeaBIOS.  This is an issue with the video bios on 
that particular graphics card.

Also, if this is for a commercial project, you may be interested in 
Sage's Rangeley BSP. 
http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/

Martin

On 12/04/2014 01:07 AM, Jack Zhao wrote:
> Hi Mr. Coreboot J
>
> I am a software engineer. And I am studying the coreboot with a new 
> project which will use the CPU Intel Rangerley. But from the supported 
> list, I cannot find it. Could you please tell me how I can see that? 
> Or you can share with me some link about it. Thanks very much for 
> support in advance.
>
> Best Regards,
>
> Jack Zhao
>
> [phone]-81122

[WANG FEI]

coreboot already supports Intel Mohon Peak platform, I noticed the source
code has been committed to coreboot source tree.

The mainboard path is coreboot\src\mainboard\intel\mohonpeak.

On Fri, Dec 5, 2014 at 5:41 AM, [e-mail]  wrote:
> Hi Martin,
>
> I am kinda have this graphic card issue when porting coreboot to this
> MohonPeak CRB, would you please advice any of the supported graphic card?
> or is there any clue or document about how to support such graphic card
> with seaBios?
>
> thanks
>
> May
>
> *From:* Martin Roth 
> *Date:* 2014-12-05 12:00
> *To:* Jack Zhao ; coreboot 
> *Subject:* Re: [coreboot] questions about Rangerley
> Hi Jack,
>    The Rangeley processor is supported by coreboot.  The intel/mohonpeak
> is the reference board.
>
> You will need to download the FSP from http://intel.com/fsp
>
> While there isn't a platform guide for rangeley yet, you would follow
> similar steps to setting up coreboot for the baytrail platform, so grab
> that platform guide from the fsp site.  I believe it should answer most
> of your questions.
>
> Please note that the graphics card delivered with the mohon peak board
> is NOT compatible with SeaBIOS.  This is an issue with the video bios on
> that particular graphics card.
>
> Also, if this is for a commercial project, you may be interested in
> Sage's Rangeley BSP.
> http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/
>
> Martin
>
> On 12/04/2014 01:07 AM, Jack Zhao wrote:
> > Hi Mr. Coreboot J
> >
> > I am a software engineer. And I am studying the coreboot with a new
> > project which will use the CPU Intel Rangerley. But from the supported
> > list, I cannot find it. Could you please tell me how I can see that?
> > Or you can share with me some link about it. Thanks very much for
> > support in advance.
> >
> > Best Regards,
> >
> > Jack Zhao
> >
> > [phone]-81122

答复: questions about Rangerley

[Jack Zhao]

Thanks Martin.
I do not have the experience on Baytrail platform with coreboot + fsp. Could
you please share me link for file or introduction. That will be great.
Thanks a lot for support.

Best Regards,
Jack Zhao
[phone]-81122

-----邮件原件-----
发件人: Martin Roth [mailto:[e-mail]] 
发送时间: 2014年12月5日 12:01
收件人: Jack Zhao; [e-mail]
主题: Re: [coreboot] questions about Rangerley

Hi Jack,
   The Rangeley processor is supported by coreboot.  The intel/mohonpeak is
the reference board.

You will need to download the FSP from http://intel.com/fsp

While there isn't a platform guide for rangeley yet, you would follow
similar steps to setting up coreboot for the baytrail platform, so grab that
platform guide from the fsp site.  I believe it should answer most of your
questions.

Please note that the graphics card delivered with the mohon peak board is
NOT compatible with SeaBIOS.  This is an issue with the video bios on that
particular graphics card.

Also, if this is for a commercial project, you may be interested in Sage's
Rangeley BSP. 
http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/

Martin

On 12/04/2014 01:07 AM, Jack Zhao wrote:
> Hi Mr. Coreboot J
>
> I am a software engineer. And I am studying the coreboot with a new 
> project which will use the CPU Intel Rangerley. But from the supported 
> list, I cannot find it. Could you please tell me how I can see that?
> Or you can share with me some link about it. Thanks very much for 
> support in advance.
>
> Best Regards,
>
> Jack Zhao
>
> [phone]-81122

答复: questions about Rangerley

[Martin Roth]

Hi Jack,
   Here's the direct link to the pdf:
http://www.intel.com/content/www/us/en/embedded/products/bay-trail/atom-e380...
     If you look at section 4.3, it describes the setup of the intel 
directory, and describes how to download and build coreboot.
Obviously things won't be exactly the same since you're trying to build 
mohon peak instead of Bayley Bay, but I believe this should help get you 
started.

Martin

On 12/05/2014 02:04 AM, Jack Zhao wrote:
> Thanks Martin.
> I do not have the experience on Baytrail platform with coreboot + fsp. Could
> you please share me link for file or introduction. That will be great.
> Thanks a lot for support.
>
> Best Regards,
> Jack Zhao
> [phone]-81122
>
> -----邮件原件-----
> 发件人: Martin Roth [mailto:[e-mail]]
> 发送时间: 2014年12月5日 12:01
> 收件人: Jack Zhao; [e-mail]
> 主题: Re: [coreboot] questions about Rangerley
>
> Hi Jack,
>     The Rangeley processor is supported by coreboot.  The intel/mohonpeak is
> the reference board.
>
> You will need to download the FSP from http://intel.com/fsp
>
> While there isn't a platform guide for rangeley yet, you would follow
> similar steps to setting up coreboot for the baytrail platform, so grab that
> platform guide from the fsp site.  I believe it should answer most of your
> questions.
>
> Please note that the graphics card delivered with the mohon peak board is
> NOT compatible with SeaBIOS.  This is an issue with the video bios on that
> particular graphics card.
>
> Also, if this is for a commercial project, you may be interested in Sage's
> Rangeley BSP.
> http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/
>
> Martin
>
> On 12/04/2014 01:07 AM, Jack Zhao wrote:
> > Hi Mr. Coreboot J
> >
> > I am a software engineer. And I am studying the coreboot with a new
> > project which will use the CPU Intel Rangerley. But from the supported
> > list, I cannot find it. Could you please tell me how I can see that?
> > Or you can share with me some link about it. Thanks very much for
> > support in advance.
> >
> > Best Regards,
> >
> > Jack Zhao
> >
> > [phone]-81122

答复: 答复: question?==?utf-8?Q?s about Rangerley

[Jack Zhao]

Thanks Martin
It is very helpful to me. Thanks a lot.

Best Regards,
Jack Zhao
[phone]-81122

-----邮件原件-----
发件人: Martin Roth [mailto:[e-mail]] 
发送时间: 2014年12月5日 23:47
收件人: Jack Zhao; [e-mail]
主题: Re: 答复: [coreboot] questions about Rangerley

Hi Jack,
   Here's the direct link to the pdf:
http://www.intel.com/content/www/us/en/embedded/products/bay-trail/atom-e380...
     If you look at section 4.3, it describes the setup of the intel directory, and describes how to download and build coreboot.
Obviously things won't be exactly the same since you're trying to build mohon peak instead of Bayley Bay, but I believe this should help get you started.

Martin

On 12/05/2014 02:04 AM, Jack Zhao wrote:
> Thanks Martin.
> I do not have the experience on Baytrail platform with coreboot + fsp. 
> Could you please share me link for file or introduction. That will be great.
> Thanks a lot for support.
>
> Best Regards,
> Jack Zhao
> [phone]-81122
>
> -----邮件原件-----
> 发件人: Martin Roth [mailto:[e-mail]]
> 发送时间: 2014年12月5日 12:01
> 收件人: Jack Zhao; [e-mail]
> 主题: Re: [coreboot] questions about Rangerley
>
> Hi Jack,
>     The Rangeley processor is supported by coreboot.  The 
> intel/mohonpeak is the reference board.
>
> You will need to download the FSP from http://intel.com/fsp
>
> While there isn't a platform guide for rangeley yet, you would follow 
> similar steps to setting up coreboot for the baytrail platform, so 
> grab that platform guide from the fsp site.  I believe it should 
> answer most of your questions.
>
> Please note that the graphics card delivered with the mohon peak board 
> is NOT compatible with SeaBIOS.  This is an issue with the video bios 
> on that particular graphics card.
>
> Also, if this is for a commercial project, you may be interested in 
> Sage's Rangeley BSP.
> http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoto
> n/
>
> Martin
>
> On 12/04/2014 01:07 AM, Jack Zhao wrote:
> > Hi Mr. Coreboot J
> >
> > I am a software engineer. And I am studying the coreboot with a new 
> > project which will use the CPU Intel Rangerley. But from the 
> > supported list, I cannot find it. Could you please tell me how I can see that?
> > Or you can share with me some link about it. Thanks very much for 
> > support in advance.
> >
> > Best Regards,
> >
> > Jack Zhao
> >
> > [phone]-81122