Hi Martin,

I am kinda have this graphic card issue when porting coreboot to this MohonPeak CRB, would you please advice any of the supported graphic card? or is there any clue or document about how to support such graphic card with seaBios?

thanks

May

 

From: Martin Roth

Date: 2014-12-05 12:00

To: Jack Zhao; coreboot

Subject: Re: [coreboot] questions about Rangerley

Hi Jack,

   The Rangeley processor is supported by coreboot.  The intel/mohonpeak

is the reference board.

 

You will need to download the FSP from http://intel.com/fsp

 

While there isn't a platform guide for rangeley yet, you would follow

similar steps to setting up coreboot for the baytrail platform, so grab

that platform guide from the fsp site.  I believe it should answer most

of your questions.

 

Please note that the graphics card delivered with the mohon peak board

is NOT compatible with SeaBIOS.  This is an issue with the video bios on

that particular graphics card.

 

 

Also, if this is for a commercial project, you may be interested in

Sage's Rangeley BSP.

http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/

 

Martin

 

On 12/04/2014 01:07 AM, Jack Zhao wrote:

>

> Hi Mr. Coreboot J

>

> I am a software engineer. And I am studying the coreboot with a new

> project which will use the CPU Intel Rangerley. But from the supported

> list, I cannot find it. Could you please tell me how I can see that?

> Or you can share with me some link about it. Thanks very much for

> support in advance.

>

> Best Regards,

>

> Jack Zhao

>

> +86-21-58966996-81122

>

>

>

 

 

--

coreboot mailing list: coreboot@coreboot.org

http://www.coreboot.org/mailman/listinfo/coreboot

--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot