Thanks Martin. I do not have the experience on Baytrail platform with coreboot + fsp. Could you please share me link for file or introduction. That will be great. Thanks a lot for support.
Best Regards, Jack Zhao +86-21-58966996-81122
-----邮件原件----- 发件人: Martin Roth [mailto:gaumless@gmail.com] 发送时间: 2014年12月5日 12:01 收件人: Jack Zhao; coreboot@coreboot.org 主题: Re: [coreboot] questions about Rangerley
Hi Jack, The Rangeley processor is supported by coreboot. The intel/mohonpeak is the reference board.
You will need to download the FSP from http://intel.com/fsp
While there isn't a platform guide for rangeley yet, you would follow similar steps to setting up coreboot for the baytrail platform, so grab that platform guide from the fsp site. I believe it should answer most of your questions.
Please note that the graphics card delivered with the mohon peak board is NOT compatible with SeaBIOS. This is an issue with the video bios on that particular graphics card.
Also, if this is for a commercial project, you may be interested in Sage's Rangeley BSP. http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/
Martin
On 12/04/2014 01:07 AM, Jack Zhao wrote:
Hi Mr. Coreboot J
I am a software engineer. And I am studying the coreboot with a new project which will use the CPU Intel Rangerley. But from the supported list, I cannot find it. Could you please tell me how I can see that? Or you can share with me some link about it. Thanks very much for support in advance.
Best Regards,
Jack Zhao
+86-21-58966996-81122