coreboot February 2013

coreboot@coreboot.org

27 participants
790 discussions

New patch to review for coreboot: cd5a012 AGESA boards: Fix grammar in description of `OemCustomizeInitEarly`
by Paul Menzel 04 Feb '13

04 Feb '13

Paul Menzel (paulepanter(a)users.sourceforge.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2268 -gerrit commit cd5a0121087b2d4a055f13db1e4c7f6be3443d15 Author: Paul Menzel <paulepanter(a)users.sourceforge.net> Date: Fri Feb 1 23:51:40 2013 +0100 AGESA boards: Fix grammar in description of `OemCustomizeInitEarly` The following command was used to correct the grammatical mistake. $ git grep -l 'This is the stub function will call' | xargs sed -i s,This is the stub function will call,This stub function will call, '{}' sed: -e Ausdruck #1, Zeichen 6: Nicht beendeter `s'-Befehl As this file seems to have been copied around a lot, it originally seems to have come with the following commit for AMD Persimmon and AMD Inagua. commit 69da1b676cd3f126b27a6fd3c23c557ac1a03961 Author: Frank Vibrans <frank.vibrans(a)amd.com> Date: Mon Feb 14 19:04:45 2011 +0000 Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8. Change-Id: I2e6630a5172738b01e6def7062284f167e5508b1 Signed-off-by: Paul Menzel <paulepanter(a)users.sourceforge.net> --- src/mainboard/amd/dinar/agesawrapper.c | 2 +- src/mainboard/amd/inagua/PlatformGnbPcie.c | 2 +- src/mainboard/amd/parmer/PlatformGnbPcie.c | 2 +- src/mainboard/amd/persimmon/PlatformGnbPcie.c | 2 +- src/mainboard/amd/south_station/PlatformGnbPcie.c | 2 +- src/mainboard/amd/thatcher/PlatformGnbPcie.c | 2 +- src/mainboard/amd/torpedo/PlatformGnbPcie.c | 2 +- src/mainboard/amd/union_station/PlatformGnbPcie.c | 2 +- src/mainboard/asrock/e350m1/PlatformGnbPcie.c | 2 +- src/mainboard/supermicro/h8qgi/platform_oem.c | 2 +- src/mainboard/supermicro/h8scm/platform_oem.c | 2 +- src/mainboard/tyan/s8226/platform_oem.c | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) diff --git a/src/mainboard/amd/dinar/agesawrapper.c b/src/mainboard/amd/dinar/agesawrapper.c index e738cba..dc14ace 100644 --- a/src/mainboard/amd/dinar/agesawrapper.c +++ b/src/mainboard/amd/dinar/agesawrapper.c @@ -352,7 +352,7 @@ agesawrapper_amdinitearly ( * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/inagua/PlatformGnbPcie.c b/src/mainboard/amd/inagua/PlatformGnbPcie.c index 539ca48..da6187a 100644 --- a/src/mainboard/amd/inagua/PlatformGnbPcie.c +++ b/src/mainboard/amd/inagua/PlatformGnbPcie.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/parmer/PlatformGnbPcie.c b/src/mainboard/amd/parmer/PlatformGnbPcie.c index 791540c..845a5e2 100644 --- a/src/mainboard/amd/parmer/PlatformGnbPcie.c +++ b/src/mainboard/amd/parmer/PlatformGnbPcie.c @@ -128,7 +128,7 @@ PCIe_COMPLEX_DESCRIPTOR Trinity = { * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcie.c b/src/mainboard/amd/persimmon/PlatformGnbPcie.c index e3cba85..a5b075e 100644 --- a/src/mainboard/amd/persimmon/PlatformGnbPcie.c +++ b/src/mainboard/amd/persimmon/PlatformGnbPcie.c @@ -32,7 +32,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/south_station/PlatformGnbPcie.c b/src/mainboard/amd/south_station/PlatformGnbPcie.c index 07aee7d..87074e3 100644 --- a/src/mainboard/amd/south_station/PlatformGnbPcie.c +++ b/src/mainboard/amd/south_station/PlatformGnbPcie.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/thatcher/PlatformGnbPcie.c b/src/mainboard/amd/thatcher/PlatformGnbPcie.c index e4308e4..afe4bb8 100644 --- a/src/mainboard/amd/thatcher/PlatformGnbPcie.c +++ b/src/mainboard/amd/thatcher/PlatformGnbPcie.c @@ -131,7 +131,7 @@ PCIe_COMPLEX_DESCRIPTOR Trinity = { * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/torpedo/PlatformGnbPcie.c b/src/mainboard/amd/torpedo/PlatformGnbPcie.c index 2d011d9..a4c09f7 100644 --- a/src/mainboard/amd/torpedo/PlatformGnbPcie.c +++ b/src/mainboard/amd/torpedo/PlatformGnbPcie.c @@ -98,7 +98,7 @@ PCIe_COMPLEX_DESCRIPTOR Llano = { * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/amd/union_station/PlatformGnbPcie.c b/src/mainboard/amd/union_station/PlatformGnbPcie.c index f1f06a8..274d641 100644 --- a/src/mainboard/amd/union_station/PlatformGnbPcie.c +++ b/src/mainboard/amd/union_station/PlatformGnbPcie.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/asrock/e350m1/PlatformGnbPcie.c b/src/mainboard/asrock/e350m1/PlatformGnbPcie.c index a79dfab..c36e50a 100644 --- a/src/mainboard/asrock/e350m1/PlatformGnbPcie.c +++ b/src/mainboard/asrock/e350m1/PlatformGnbPcie.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/supermicro/h8qgi/platform_oem.c b/src/mainboard/supermicro/h8qgi/platform_oem.c index 883cad1..90b93d0 100644 --- a/src/mainboard/supermicro/h8qgi/platform_oem.c +++ b/src/mainboard/supermicro/h8qgi/platform_oem.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/supermicro/h8scm/platform_oem.c b/src/mainboard/supermicro/h8scm/platform_oem.c index 883cad1..90b93d0 100644 --- a/src/mainboard/supermicro/h8scm/platform_oem.c +++ b/src/mainboard/supermicro/h8scm/platform_oem.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters: diff --git a/src/mainboard/tyan/s8226/platform_oem.c b/src/mainboard/tyan/s8226/platform_oem.c index 883cad1..90b93d0 100644 --- a/src/mainboard/tyan/s8226/platform_oem.c +++ b/src/mainboard/tyan/s8226/platform_oem.c @@ -31,7 +31,7 @@ * OemCustomizeInitEarly * * Description: - * This is the stub function will call the host environment through the binary block + * This stub function will call the host environment through the binary block * interface (call-out port) to provide a user hook opportunity * * Parameters:

1 0

FOSDEM 2013 - who else comes?
by Rudolf Marek 03 Feb '13

03 Feb '13

Hi all, As Carl-Daniel wrote we have a stand (two tables) at FOSDEM on 2,3rd February in Brussel. So far me and Carl-Daniel will come. I will arrive early on Friday and leave on Sunday evening. I will bring my boards with me (2?) and of course also F2A85-M. If anyone wants to come, please let us know. Thanks Rudolf

4 5

Patch set updated for coreboot: b07fa32 exynos/s5p: Add helper function for reading a single MVL3 GPIO
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2266 -gerrit commit b07fa32b98baa98847cf70c0acfac4a91e63a7e9 Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 17:02:36 2013 -0800 exynos/s5p: Add helper function for reading a single MVL3 GPIO This adds a helper function to read only a single GPIO which uses 3-state logic. Examples of this typically include board straps which are used to provide mainboard-specific information at the hardware- level, such as board revision or configuration options. This is part of a larger clean-up effort for Snow. We may want to genericise this for other CPUs in the future. Change-Id: Ic44f5e589cda89b419a07eca246847e9ce7dcd8d Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/cpu/samsung/exynos5250/gpio.h | 9 +++++ src/cpu/samsung/s5p-common/s5p_gpio.c | 69 ++++++++++++++++++++++------------- 2 files changed, 53 insertions(+), 25 deletions(-) diff --git a/src/cpu/samsung/exynos5250/gpio.h b/src/cpu/samsung/exynos5250/gpio.h index 7606262..1214384 100644 --- a/src/cpu/samsung/exynos5250/gpio.h +++ b/src/cpu/samsung/exynos5250/gpio.h @@ -477,6 +477,15 @@ void gpio_set_rate(int gpio, int mode); */ int gpio_decode_number(unsigned gpio_list[], int count); +/* + * similar to gpio_decode_number, but reads only a single GPIO + * + * @param gpio GPIO to read + * @return -1 if the value cannot be determined. Otherwise returns + * the corresponding MVL3 enum value. + */ +int gpio_read_mvl3(unsigned gpio); + void gpio_info(void); #endif /* EXYNOS5250_GPIO_H_ */ diff --git a/src/cpu/samsung/s5p-common/s5p_gpio.c b/src/cpu/samsung/s5p-common/s5p_gpio.c index 50c4519..8332015 100644 --- a/src/cpu/samsung/s5p-common/s5p_gpio.c +++ b/src/cpu/samsung/s5p-common/s5p_gpio.c @@ -414,42 +414,61 @@ int gpio_set_value(unsigned gpio, int value) */ #define GPIO_DELAY_US 5 -/* FIXME(dhendrix): this should probably go to a more generic location */ +int gpio_read_mvl3(unsigned gpio) +{ + int high, low; + enum mvl3 value; + + if (gpio >= GPIO_MAX_PORT) + return -1; + + gpio_direction_input(gpio); + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + udelay(GPIO_DELAY_US); + high = gpio_get_value(gpio); + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_DOWN); + udelay(GPIO_DELAY_US); + low = gpio_get_value(gpio); + + if (high && low) /* external pullup */ + value = LOGIC_1; + else if (!high && !low) /* external pulldown */ + value = LOGIC_0; + else /* floating */ + value = LOGIC_Z; + + /* + * Check if line is externally pulled high and + * configure the internal pullup to match. For + * floating and pulldowns, the GPIO is already + * configured with an internal pulldown from the + * above test. + */ + if (value == LOGIC_1) + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + + return value; +} + int gpio_decode_number(unsigned gpio_list[], int count) { int result = 0; int multiplier = 1; - int value, high, low; - int gpio, i; + int gpio, i, value; + enum mvl3 mvl3; for (i = 0; i < count; i++) { gpio = gpio_list[i]; - if (gpio >= GPIO_MAX_PORT) - return -1; - gpio_direction_input(gpio); - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); - udelay(GPIO_DELAY_US); - high = gpio_get_value(gpio); - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_DOWN); - udelay(GPIO_DELAY_US); - low = gpio_get_value(gpio); - if (high && low) /* external pullup */ + mvl3 = gpio_read_mvl3(gpio); + if (mvl3 == LOGIC_1) value = 2; - else if (!high && !low) /* external pulldown */ + else if (mvl3 == LOGIC_0) value = 1; - else /* floating */ + else if (mvl3 == LOGIC_Z) value = 0; - - /* - * Check if line is externally pulled high and - * configure the internal pullup to match. For - * floating and pulldowns, the GPIO is already - * configured with an internal pulldown from the - * above test. - */ - if (value == 2) - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + else + return -1; result += value * multiplier; multiplier *= 3;

1 0

Patch merged into coreboot/master: 1088394 exynos5250: remove CPU check from samsung_get_base_* macro
by gerrit＠coreboot.org 03 Feb '13

03 Feb '13

the following patch was just integrated into master: commit 10883945dcb089d7c4908eacaab7cb8d955657a3 Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 20:19:58 2013 -0800 exynos5250: remove CPU check from samsung_get_base_* macro The cpu_is_exynos5() macro seems broken at the moment, so skip it. The macro is superfluous and will probably be replaced eventually, but at least this will un-break usage sites. Change-Id: Ibd360cbfa18047ad8a3488d4f24c3fc4d7415eba Signed-off-by: David Hendricks <dhendrix(a)chromium.org> Reviewed-on: http://review.coreboot.org/2264 Reviewed-by: Ronald G. Minnich <rminnich(a)gmail.com> Tested-by: build bot (Jenkins) Build-Tested: build bot (Jenkins) at Sun Feb 3 05:47:40 2013, giving +1 See http://review.coreboot.org/2264 for details. -gerrit

1 0

Patch merged into coreboot/master: fe18792 armv7: Add 'bootblock' build class.
by gerrit＠coreboot.org 03 Feb '13

03 Feb '13

the following patch was just integrated into master: commit fe18792a0887b5ba1ce8e0c8f9f6f1911395552a Author: Hung-Te Lin <hungte(a)chromium.org> Date: Fri Feb 1 01:09:24 2013 +0800 armv7: Add 'bootblock' build class. For ARM platform, the bootblock may need more C source files to initialize UART / SPI for loading romstage. To preventing making complex and implicit dependency by using #include inside bootblock.c, we should add a new build class "bootblock". Also #ifdef __BOOT_BLOCK__ can be used to detect if the source is being compiled for boot block. For x86, the bootblock is limited to fewer assembly files so it's not using this class. (Some files shared by x86 and arm in top level or lib are also changed but nothing should be changed in x86 build process.) Change-Id: Ia81bccc366d2082397d133d9245f7ecb33b8bc8b Signed-off-by: Hung-Te Lin <hungte(a)chromium.org> Reviewed-on: http://review.coreboot.org/2252 Reviewed-by: Ronald G. Minnich <rminnich(a)gmail.com> Tested-by: build bot (Jenkins) Build-Tested: build bot (Jenkins) at Sun Feb 3 05:40:28 2013, giving +1 Reviewed-By: Ronald G. Minnich <rminnich(a)gmail.com> at Sun Feb 3 05:35:28 2013, giving +2 See http://review.coreboot.org/2252 for details. -gerrit

1 0

Patch set updated for coreboot: 0991bc9 add gpio.h for generic GPIO-related definitions
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2265 -gerrit commit 0991bc96a4e277dbe6fb8aaf99eb2d17fa0fa930 Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 16:57:11 2013 -0800 add gpio.h for generic GPIO-related definitions This adds src/include/gpio.h which contains generic GPIO enums for type (in/out/alt) and 3-state logic. The header was originally written for another FOSS project (mosys) and thus the BSD license. Change-Id: Id1dff69169e8b1ec372107737d356b0fa0d80498 Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/include/gpio.h | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/src/include/gpio.h b/src/include/gpio.h new file mode 100644 index 0000000..f602b1e --- /dev/null +++ b/src/include/gpio.h @@ -0,0 +1,63 @@ +/* + * Copyright 2012, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef GPIO_H +#define GPIO_H + +enum gpio_types { + GPIO_IN, + GPIO_OUT, + GPIO_ALT, /* catch-all for alternate functions */ +}; + +/* + * Many-value logic (3 states). This can be used for inputs whereby presence + * of external pull-up or pull-down resistors can be added to overcome internal + * pull-ups/pull-downs and force a single value. + * + * Thus, external pull resistors can force a 0 or 1 and if the value changes + * along with internal pull-up/down enable then the input is floating. + * + * Vpd | Vpu | MVL + * ----------------- + * 0 | 0 | 0 + * ----------------- + * 0 | 1 | Z <-- floating input will follow internal pull up/down + * ----------------- + * 1 | 1 | 1 + */ +enum mvl3 { + LOGIC_0, + LOGIC_1, + LOGIC_Z, /* high impedence / tri-stated / floating */ +}; + +#endif /* GPIO_H */

1 0

New patch to review for coreboot: bf93943 exynos/snow: Move board-specific timing info to board directory
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2267 -gerrit commit bf93943f3ad8b5f2d3082c09b20e94b0d8a1fe4e Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 20:27:23 2013 -0800 exynos/snow: Move board-specific timing info to board directory ** do not submit ** This is a work-in-progress that attempts to de-tangle some of the original code so that mainboard-specific code goes where it should. This allows us to sever the dependencies between CPU-specific files and mainboard-specific files. Things got a bit messy in the process. This patch needs further clean-up and to be split apart. Change-Id: Ic873d796c97fed99d274ad75b78ce972856e35da Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/arch/armv7/lib/Makefile.inc | 2 + src/cpu/samsung/exynos5250/Kconfig | 2 +- src/cpu/samsung/exynos5250/Makefile.inc | 11 +- src/cpu/samsung/exynos5250/clock_init.c | 721 +------------------------------ src/cpu/samsung/exynos5250/clock_init.h | 22 +- src/cpu/samsung/exynos5250/dmc.h | 98 +++++ src/cpu/samsung/s5p-common/Makefile.inc | 5 + src/cpu/samsung/s5p-common/s5p_gpio.c | 1 + src/mainboard/google/snow/Makefile.inc | 6 + src/mainboard/google/snow/bootblock.c | 744 +------------------------------- src/mainboard/google/snow/clocks.c | 132 ++++++ src/mainboard/google/snow/mainboard.c | 50 ++- src/mainboard/google/snow/mainboard.h | 38 ++ src/mainboard/google/snow/memory.c | 492 +++++++++++++++++++++ src/mainboard/google/snow/romstage.c | 34 +- 15 files changed, 878 insertions(+), 1480 deletions(-) diff --git a/src/arch/armv7/lib/Makefile.inc b/src/arch/armv7/lib/Makefile.inc index 2470db2..e0445ce 100644 --- a/src/arch/armv7/lib/Makefile.inc +++ b/src/arch/armv7/lib/Makefile.inc @@ -1,3 +1,5 @@ +bootblock-y += syslib.c + romstage-y += cache_v7.c romstage-y += cache-cp15.c romstage-y += div0.c diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig index 41a1446..3755294 100644 --- a/src/cpu/samsung/exynos5250/Kconfig +++ b/src/cpu/samsung/exynos5250/Kconfig @@ -38,7 +38,7 @@ config BOOTBLOCK_BASE config ID_SECTION_BASE hex - default 0x02026000 + default 0x02027000 config ROMSTAGE_BASE hex diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc index 6eee503..6a619f1 100644 --- a/src/cpu/samsung/exynos5250/Makefile.inc +++ b/src/cpu/samsung/exynos5250/Makefile.inc @@ -3,10 +3,15 @@ # image outside of CBFS #INTERMEDIATE += exynos5250_add_bl1 +# Clock init is done in bootblock to support UART output +# and may be moved entirely to romstage eventually. +bootblock-y += clock_init.c +bootblock-y += clock.c + romstage-y += clock.c romstage-y += clock_init.c romstage-y += exynos_cache.c -romstage-y += lowlevel_init_c.c +#romstage-y += lowlevel_init_c.c romstage-y += pinmux.c romstage-y += power.c romstage-y += soc.c @@ -23,7 +28,7 @@ romstage-y += dmc_init_ddr3.c ramstage-y += clock.c ramstage-y += clock_init.c ramstage-y += exynos_cache.c -ramstage-y += lowlevel_init_c.c +#ramstage-y += lowlevel_init_c.c ramstage-y += pinmux.c ramstage-y += power.c ramstage-y += soc.c @@ -31,7 +36,7 @@ ramstage-y += uart.c #ramstage-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.c #ramstage-$(CONFIG_SATA_AHCI) += sata.c -ramstage-$(CONFIG_SPL_BUILD) += lowlevel_init_c.c +#ramstage-$(CONFIG_SPL_BUILD) += lowlevel_init_c.c exynos5250_add_bl1: $(obj)/coreboot.pre printf " DD Adding Samsung Exynos5250 BL1\n" diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c index 421d880..4f21022 100644 --- a/src/cpu/samsung/exynos5250/clock_init.c +++ b/src/cpu/samsung/exynos5250/clock_init.c @@ -29,740 +29,27 @@ #include <console/console.h> -#include <cpu/samsung/exynos5-common/spl.h> +/* FIXME: remove unneeded #includes */ #include <cpu/samsung/exynos5250/clk.h> +#include <cpu/samsung/exynos5250/clock_init.h> #include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/dmc.h> #include <cpu/samsung/exynos5250/s5p-dp.h> #include <cpu/samsung/s5p-common/clk.h> -#include "clock_init.h" #include "setup.h" -struct arm_clk_ratios arm_clk_ratios[] = { - { - .arm_freq_mhz = 600, - - .apll_mdiv = 0xc8, - .apll_pdiv = 0x4, - .apll_sdiv = 0x1, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x2, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x1, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 800, - - .apll_mdiv = 0x64, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x3, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1000, - - .apll_mdiv = 0x7d, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x4, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1200, - - .apll_mdiv = 0x96, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x5, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1400, - - .apll_mdiv = 0xaf, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1700, - - .apll_mdiv = 0x1a9, - .apll_pdiv = 0x6, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - } -}; - -struct mem_timings mem_timings[] = { - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .use_bpll = 0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .use_bpll = 0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010000, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x5, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_40_OHM, - .gate_leveling_enable = 1, - }, - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 780, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x82, - .bpll_pdiv = 0x4, - .bpll_sdiv = 0x0, - .use_bpll = 1, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 780, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x82, - .bpll_pdiv = 0x4, - .bpll_sdiv = 0x0, - .use_bpll = 1, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010000, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x5, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_40_OHM, - .gate_leveling_enable = 1, - } -}; - -/** - * Detect what memory is present based on board strappings - * - * Boards have various resistor stuff options that are supposed to match - * which SDRAM is present (and which revision of the board this is). This - * uses the resistor stuff options to figure out what memory manufacturer - * to use for matching in the memory tables. - * - * @return A MEM_MANUF_XXX constant, or -1 if an error occurred. - */ -/* - * FIXME(dhendrix): This unwinds into a mess of board-specific code. The - * board's romstage.c file should detect the memory type and pass in - * appropriate parameters to whatever calls this. - */ -#define BOARD_REV_ELPIDA_MEMORY 3 -#define BOARD_REV_SAMSUNG_MEMORY 4 - -static inline int board_get_revision(void) -{ - /* FIXME: yuck! */ - return BOARD_REV_ELPIDA_MEMORY; -} - -static int autodetect_memory(void) -{ - int board_rev = board_get_revision(); - - if (board_rev == -1) - return -1; - - switch (board_rev) { - case BOARD_REV_SAMSUNG_MEMORY: - return MEM_MANUF_SAMSUNG; - case BOARD_REV_ELPIDA_MEMORY: - return MEM_MANUF_ELPIDA; - } - - return -1; -} - -#ifdef CONFIG_SPL_BUILD - -/** - * Get the required memory type and speed (SPL version). - * - * In SPL we have no device tree, so we use the machine parameters - */ -int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf) -{ - struct spl_machine_param *params; - - params = spl_get_machine_params(); - *mem_type = params->mem_type; - *frequency_mhz = params->frequency_mhz; - *arm_freq = params->arm_freq_mhz; - if (params->mem_manuf == MEM_MANUF_AUTODETECT) { - *mem_manuf = autodetect_memory(); - if (*mem_manuf == -1) - return -1; - } else { - *mem_manuf = params->mem_manuf; - } - - return 0; -} - -#else - -static const char *mem_types[DDR_MODE_COUNT] = { - "DDR2", "DDR3", "LPDDR2", "LPDDR3" -}; - -static const char *mem_manufs[MEM_MANUF_COUNT] = { - "autodetect", "Elpida", "Samsung" -}; - -int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf) -{ - const char *typestr; - int node, i; - - node = fdtdec_next_compatible(gd->fdt_blob, 0, - COMPAT_SAMSUNG_EXYNOS_DMC); - if (node < 0) - die("No memory information available in device tree"); - typestr = fdt_getprop(gd->fdt_blob, node, "mem-type", NULL); - for (i = 0; i < DDR_MODE_COUNT; i++) { - if (!stricmp(typestr, mem_types[i])) - break; - } - if (i == DDR_MODE_COUNT) - die("Invalid memory type in device tree"); - *mem_type = i; - - typestr = fdt_getprop(gd->fdt_blob, node, "mem-manuf", NULL); - for (i = 0; i < MEM_MANUF_COUNT; i++) { - if (!stricmp(typestr, mem_manufs[i])) - break; - } - if (i == MEM_MANUF_COUNT) - die("Invalid memory manufacturer in device tree"); - - if (i == MEM_MANUF_AUTODETECT) { - *mem_manuf = autodetect_memory(); - if (*mem_manuf == -1) - return -1; - } else { - *mem_manuf = i; - } - - *frequency_mhz = fdtdec_get_int(gd->fdt_blob, node, "clock-frequency", - 0); - if (!*frequency_mhz) - die("Invalid memory frequency in device tree"); - - *arm_freq = fdtdec_get_int(gd->fdt_blob, node, "arm-frequency", 0); - /* TODO: Remove all these panics/dies, and just return an error code */ - if (!*arm_freq) - die("Invalid ARM frequency in device tree"); - - return 0; -} - -const char *clock_get_mem_type_name(enum ddr_mode mem_type) -{ - if (mem_type >= 0 && mem_type < DDR_MODE_COUNT) - return mem_types[mem_type]; - - return "<unknown>"; -} - -const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf) -{ - if (mem_manuf >= 0 && mem_manuf < MEM_MANUF_COUNT) - return mem_manufs[mem_manuf]; - - return "<unknown>"; -} -#endif - -/* Get the ratios for setting ARM clock */ -struct arm_clk_ratios *get_arm_ratios(void); /* FIXME: silence compiler... */ -struct arm_clk_ratios *get_arm_ratios(void) -{ - struct arm_clk_ratios *arm_ratio; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - /* TODO(sjg(a)chromium.org): Return NULL and have caller deal with it */ - if (clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) - ; - for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); - i++, arm_ratio++) { - if (arm_ratio->arm_freq_mhz == arm_freq) - return arm_ratio; - } - - die("get_arm_ratios: Failed to find ratio\n"); - return NULL; -} - -struct mem_timings *clock_get_mem_timings(void) -{ - /* FIXME: hard-coded for now */ - return &mem_timings[0]; -#if 0 - struct mem_timings *mem; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - if (!clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) { - for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); - i++, mem++) { - if (mem->mem_type == mem_type && - mem->frequency_mhz == frequency_mhz && - mem->mem_manuf == mem_manuf) - return mem; - } - } - return NULL; -#endif -} - -void system_clock_init(void) +void system_clock_init(struct mem_timings *mem, + struct arm_clk_ratios *arm_clk_ratio) { struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; struct exynos5_mct_regs *mct_regs = (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; - struct mem_timings *mem; - struct arm_clk_ratios *arm_clk_ratio; u32 val, tmp; /* Turn on the MCT as early as possible. */ mct_regs->g_tcon |= (1 << 8); - mem = clock_get_mem_timings(); - arm_clk_ratio = get_arm_ratios(); - clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); do { val = readl(&clk->mux_stat_cpu); diff --git a/src/cpu/samsung/exynos5250/clock_init.h b/src/cpu/samsung/exynos5250/clock_init.h index 00561a0..b8b3e04 100644 --- a/src/cpu/samsung/exynos5250/clock_init.h +++ b/src/cpu/samsung/exynos5250/clock_init.h @@ -25,9 +25,13 @@ #ifndef __EXYNOS_CLOCK_INIT_H #define __EXYNOS_CLOCK_INIT_H +struct mem_timings; + +#if 0 enum { MEM_TIMINGS_MSR_COUNT = 4, }; +#endif /* These are the ratio's for configuring ARM clock */ struct arm_clk_ratios { @@ -47,9 +51,10 @@ struct arm_clk_ratios { unsigned int arm_ratio; }; +#if 0 /* These are the memory timings for a particular memory type and speed */ struct mem_timings { - enum mem_manuf mem_manuf; /* Memory manufacturer */ + int mem_manuf; /* Memory manufacturer */ enum ddr_mode mem_type; /* Memory type */ unsigned int frequency_mhz; /* Frequency of memory in MHz */ @@ -137,14 +142,21 @@ struct mem_timings { /** * Get the correct memory timings for our selected memory type and speed. * - * This function can be called from SPL or the main U-Boot. - * * @return pointer to the memory timings that we should use */ -struct mem_timings *clock_get_mem_timings(void); +struct mem_timings *get_mem_timings(void); +#endif + +/** + * Get the clock ratios for CPU configuration + * + * @return pointer to the clock ratios that we should use + */ +struct arm_clk_ratios *get_arm_clk_ratios(void); /* * Initialize clock for the device */ -void system_clock_init(void); +void system_clock_init(struct mem_timings *mem, + struct arm_clk_ratios *arm_clk_ratio); #endif diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h index 9b1f293..0814c07 100644 --- a/src/cpu/samsung/exynos5250/dmc.h +++ b/src/cpu/samsung/exynos5250/dmc.h @@ -175,6 +175,10 @@ enum mem_manuf { MEM_MANUF_COUNT = 2, // fancy that. }; +enum { + MEM_TIMINGS_MSR_COUNT = 4, +}; + #define DMC_INTERLEAVE_SIZE 0x1f /* CONCONTROL register fields */ @@ -224,5 +228,99 @@ enum mem_manuf { #define PHY_CON42_CTRL_RDLAT_SHIFT 0 #define PHY_CON42_CTRL_RDLAT_MASK (0x1f << PHY_CON42_CTRL_RDLAT_SHIFT) +/* These are the memory timings for a particular memory type and speed */ +struct mem_timings { + enum mem_manuf mem_manuf; /* Memory manufacturer */ + enum ddr_mode mem_type; /* Memory type */ + unsigned int frequency_mhz; /* Frequency of memory in MHz */ + + /* Here follow the timing parameters for the selected memory */ + uint8_t apll_mdiv; + uint8_t apll_pdiv; + uint8_t apll_sdiv; + uint8_t mpll_mdiv; + uint8_t mpll_pdiv; + uint8_t mpll_sdiv; + uint8_t cpll_mdiv; + uint8_t cpll_pdiv; + uint8_t cpll_sdiv; + uint8_t gpll_pdiv; + uint16_t gpll_mdiv; + uint8_t gpll_sdiv; + uint8_t epll_mdiv; + uint8_t epll_pdiv; + uint8_t epll_sdiv; + uint8_t vpll_mdiv; + uint8_t vpll_pdiv; + uint8_t vpll_sdiv; + uint8_t bpll_mdiv; + uint8_t bpll_pdiv; + uint8_t bpll_sdiv; + uint8_t use_bpll; /* 1 to use BPLL for cdrex, 0 to use MPLL */ + uint8_t pclk_cdrex_ratio; + unsigned int direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + + unsigned int timing_ref; + unsigned int timing_row; + unsigned int timing_data; + unsigned int timing_power; + + /* DQS, DQ, DEBUG offsets */ + unsigned int phy0_dqs; + unsigned int phy1_dqs; + unsigned int phy0_dq; + unsigned int phy1_dq; + uint8_t phy0_tFS; + uint8_t phy1_tFS; + uint8_t phy0_pulld_dqs; + uint8_t phy1_pulld_dqs; + + uint8_t lpddr3_ctrl_phy_reset; + uint8_t ctrl_start_point; + uint8_t ctrl_inc; + uint8_t ctrl_start; + uint8_t ctrl_dll_on; + uint8_t ctrl_ref; + + uint8_t ctrl_force; + uint8_t ctrl_rdlat; + uint8_t ctrl_bstlen; + + uint8_t fp_resync; + uint8_t iv_size; + uint8_t dfi_init_start; + uint8_t aref_en; + + uint8_t rd_fetch; + + uint8_t zq_mode_dds; + uint8_t zq_mode_term; + uint8_t zq_mode_noterm; /* 1 to allow termination disable */ + + unsigned int memcontrol; + unsigned int memconfig; + + unsigned int membaseconfig0; + unsigned int membaseconfig1; + unsigned int prechconfig_tp_cnt; + unsigned int dpwrdn_cyc; + unsigned int dsref_cyc; + unsigned int concontrol; + /* Channel and Chip Selection */ + uint8_t dmc_channels; /* number of memory channels */ + uint8_t chips_per_channel; /* number of chips per channel */ + uint8_t chips_to_configure; /* number of chips to configure */ + uint8_t send_zq_init; /* 1 to send this command */ + unsigned int impedance; /* drive strength impedeance */ + uint8_t gate_leveling_enable; /* check gate leveling is enabled */ +}; + +/** + * Get the correct memory timings for our selected memory type and speed. + * + * @return pointer to the memory timings that we should use + */ +struct mem_timings *get_mem_timings(void); + #endif #endif diff --git a/src/cpu/samsung/s5p-common/Makefile.inc b/src/cpu/samsung/s5p-common/Makefile.inc index 7de3c28..2714948 100644 --- a/src/cpu/samsung/s5p-common/Makefile.inc +++ b/src/cpu/samsung/s5p-common/Makefile.inc @@ -1,3 +1,8 @@ +# cpu_info.c is needed in the bootblock so that samsung_get_base_* macros work +bootblock-y += pwm.c # needed by timer.c +bootblock-y += s5p_gpio.c +bootblock-y += timer.c + romstage-y += cpu_info.c romstage-y += pwm.c # needed by timer.c romstage-y += s5p_gpio.c diff --git a/src/cpu/samsung/s5p-common/s5p_gpio.c b/src/cpu/samsung/s5p-common/s5p_gpio.c index 8332015..e6c1398 100644 --- a/src/cpu/samsung/s5p-common/s5p_gpio.c +++ b/src/cpu/samsung/s5p-common/s5p_gpio.c @@ -20,6 +20,7 @@ /* FIXME(dhendrix): fix this up so it doesn't require a bunch of #ifdefs... */ #include <common.h> +#include <gpio.h> //#include <arch/io.h> #include <arch/gpio.h> #include <console/console.h> diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc index a43bcbc..402f080 100644 --- a/src/mainboard/google/snow/Makefile.inc +++ b/src/mainboard/google/snow/Makefile.inc @@ -17,6 +17,12 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +bootblock-y += clocks.c +bootblock-y += mainboard.c +bootblock-y += memory.c + +romstage-y += mainboard.c +romstage-y += memory.c romstage-y += romstage.c # ramstage-y += ec.c diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c index 7609410..1bfca56 100644 --- a/src/mainboard/google/snow/bootblock.c +++ b/src/mainboard/google/snow/bootblock.c @@ -29,6 +29,7 @@ #include "cpu/samsung/exynos5250/periph.h" #include "cpu/samsung/exynos5250/setup.h" #include "cpu/samsung/exynos5250/clock_init.h" +#include "cpu/samsung/s5p-common/clk.h" #include "cpu/samsung/s5p-common/gpio.h" #include "cpu/samsung/s5p-common/s3c24x0_i2c.h" #include "cpu/samsung/exynos5-common/spi.h" @@ -40,357 +41,10 @@ #include <console/console.h> #include <cbfs.h> -#define EXYNOS5_CLOCK_BASE 0x10010000 - -void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - unsigned shift; - unsigned mask = 0xff; - u32 *reg; - - reg = &clk->div_peric1; - shift = 24; - clrsetbits_le32(reg, mask << shift, (divisor & mask) << shift); -} - -void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - unsigned shift; - unsigned mask = 0xff; - u32 *reg; - - reg = &clk->div_peric1; - shift = 16; - clrsetbits_le32(reg, mask << shift, (divisor & mask) << shift); -} - -/** - * Linearly searches for the most accurate main and fine stage clock scalars - * (divisors) for a specified target frequency and scalar bit sizes by checking - * all multiples of main_scalar_bits values. Will always return scalars up to or - * slower than target. - * - * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 - * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 - * @param input_freq Clock frequency to be scaled in Hz - * @param target_freq Desired clock frequency in Hz - * @param best_fine_scalar Pointer to store the fine stage divisor - * - * @return best_main_scalar Main scalar for desired frequency or -1 if none - * found - */ -static int clock_calc_best_scalar(unsigned int main_scaler_bits, - unsigned int fine_scalar_bits, unsigned int input_rate, - unsigned int target_rate, unsigned int *best_fine_scalar) -{ - int i; - int best_main_scalar = -1; - unsigned int best_error = target_rate; - const unsigned int cap = (1 << fine_scalar_bits) - 1; - const unsigned int loops = 1 << main_scaler_bits; - -#if 0 - debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, - target_rate, cap); - - assert(best_fine_scalar != NULL); - assert(main_scaler_bits <= fine_scalar_bits); -#endif - - *best_fine_scalar = 1; - - if (input_rate == 0 || target_rate == 0) - return -1; - - if (target_rate >= input_rate) - return 1; - - for (i = 1; i <= loops; i++) { - const unsigned int effective_div = MAX(MIN(input_rate / i / - target_rate, cap), 1); - const unsigned int effective_rate = input_rate / i / - effective_div; - const int error = target_rate - effective_rate; - -#if 0 - debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, - effective_rate, error); -#endif - - if (error >= 0 && error <= best_error) { - best_error = error; - best_main_scalar = i; - *best_fine_scalar = effective_div; - } - } - - return best_main_scalar; -} - -int clock_set_rate(enum periph_id periph_id, unsigned int rate) -{ - int main; - unsigned int fine; - - main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); - if (main < 0) { -// debug("%s: Cannot set clock rate for periph %d", -// __func__, periph_id); - return -1; - } - clock_ll_set_ratio(-1, main - 1); - clock_ll_set_pre_ratio(-1, fine - 1); - - return 0; -} - -struct gpio_info { - unsigned int reg_addr; /* Address of register for this part */ - unsigned int max_gpio; /* Maximum GPIO in this part */ -}; - -static const struct gpio_info gpio_data[EXYNOS_GPIO_NUM_PARTS] = { - { EXYNOS5_GPIO_PART1_BASE, GPIO_MAX_PORT_PART_1 }, - { EXYNOS5_GPIO_PART2_BASE, GPIO_MAX_PORT_PART_2 }, - { EXYNOS5_GPIO_PART3_BASE, GPIO_MAX_PORT_PART_3 }, - { EXYNOS5_GPIO_PART4_BASE, GPIO_MAX_PORT_PART_4 }, - { EXYNOS5_GPIO_PART5_BASE, GPIO_MAX_PORT_PART_5 }, - { EXYNOS5_GPIO_PART6_BASE, GPIO_MAX_PORT }, -}; - -static struct s5p_gpio_bank *gpio_get_bank(unsigned int gpio) -{ - const struct gpio_info *data; - unsigned int upto; - int i; - - for (i = upto = 0, data = gpio_data; i < EXYNOS_GPIO_NUM_PARTS; - i++, upto = data->max_gpio, data++) { - if (gpio < data->max_gpio) { - struct s5p_gpio_bank *bank; - - bank = (struct s5p_gpio_bank *)data->reg_addr; - bank += (gpio - upto) / GPIO_PER_BANK; - return bank; - } - } - -#ifndef CONFIG_SPL_BUILD - assert(gpio < GPIO_MAX_PORT); /* ...which it will not be */ -#endif - return NULL; -} - -#define CON_MASK(x) (0xf << ((x) << 2)) -#define CON_SFR(x, v) ((v) << ((x) << 2)) - -/* This macro gets gpio pin offset from 0..7 */ -#define GPIO_BIT(x) ((x) & 0x7) - -void gpio_cfg_pin(int gpio, int cfg) -{ - unsigned int value; - struct s5p_gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->con); - value &= ~CON_MASK(GPIO_BIT(gpio)); - value |= CON_SFR(GPIO_BIT(gpio), cfg); - writel(value, &bank->con); -} - -/* Pull mode */ -#define EXYNOS_GPIO_PULL_NONE 0x0 -#define EXYNOS_GPIO_PULL_DOWN 0x1 -#define EXYNOS_GPIO_PULL_UP 0x3 - -#define PULL_MASK(x) (0x3 << ((x) << 1)) -#define PULL_MODE(x, v) ((v) << ((x) << 1)) - -void gpio_set_pull(int gpio, int mode) -{ - unsigned int value; - struct s5p_gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->pull); - value &= ~PULL_MASK(GPIO_BIT(gpio)); - - switch (mode) { - case EXYNOS_GPIO_PULL_DOWN: - case EXYNOS_GPIO_PULL_UP: - value |= PULL_MODE(GPIO_BIT(gpio), mode); - break; - default: - break; - } - - writel(value, &bank->pull); -} - static uint32_t uart3_base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; #define CONFIG_SYS_CLK_FREQ 24000000 -/* exynos5: return pll clock frequency */ -unsigned long get_pll_clk(int pllreg); -unsigned long get_pll_clk(int pllreg) -{ - struct exynos5_clock *clk = - (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq; - - switch (pllreg) { - case APLL: - r = readl(&clk->apll_con0); - break; - case BPLL: - r = readl(&clk->bpll_con0); - break; - case MPLL: - r = readl(&clk->mpll_con0); - break; - case EPLL: - r = readl(&clk->epll_con0); - k = readl(&clk->epll_con1); - break; - case VPLL: - r = readl(&clk->vpll_con0); - k = readl(&clk->vpll_con1); - break; - default: -// printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg); - return 0; - } - - /* - * APLL_CON: MIDV [25:16] - * MPLL_CON: MIDV [25:16] - * EPLL_CON: MIDV [24:16] - * VPLL_CON: MIDV [24:16] - */ - if (pllreg == APLL || pllreg == BPLL || pllreg == MPLL) - mask = 0x3ff; - else - mask = 0x1ff; - - m = (r >> 16) & mask; - - /* PDIV [13:8] */ - p = (r >> 8) & 0x3f; - /* SDIV [2:0] */ - s = r & 0x7; - - freq = CONFIG_SYS_CLK_FREQ; - - if (pllreg == EPLL) { - k = k & 0xffff; - /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 65536) * (freq / (p * (1 << s))); - } else if (pllreg == VPLL) { - k = k & 0xfff; - /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 1024) * (freq / (p * (1 << s))); - } else { - /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ - fout = m * (freq / (p * (1 << s))); - } - - return fout; -} - -/* src_bit div_bit prediv_bit */ -static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { - {0, 4, 0, -1}, - {4, 4, 4, -1}, - {8, 4, 8, -1}, - {12, 4, 12, -1}, - {0, 4, 0, 8}, - {4, 4, 16, 24}, - {8, 4, 0, 8}, - {12, 4, 16, 24}, - {-1, -1, -1, -1}, - {16, 4, 0, 8}, /* PERIPH_ID_SROMC */ - {20, 4, 16, 24}, - {24, 4, 0, 8}, - {0, 4, 0, 4}, - {4, 4, 12, 16}, - {-1, 4, -1, -1}, - {-1, 4, -1, -1}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {-1, 4, 24, 0}, - {24, 4, 0, -1}, - {24, 4, 0, -1}, - {24, 4, 0, -1}, - {24, 4, 0, -1}, - {24, 4, 0, -1}, - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, - {-1, -1, -1, -1}, /* PERIPH_ID_I2S1 */ - {24, 1, 20, -1}, /* PERIPH_ID_SATA */ -}; - -static unsigned long my_clock_get_periph_rate(enum periph_id peripheral) -{ -// struct exynos5_clock *clk = -// (struct exynos5_clock *)samsung_get_base_clock(); - struct exynos5_clock *clk = - (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - struct clk_bit_info *bit_info = &clk_bit_info[peripheral]; -// struct clk_bit_info bit_info = { 12, 4, 12, -1 }; - unsigned long sclk, sub_clk; - unsigned int src, div, sub_div; - - switch (peripheral) { - case PERIPH_ID_UART0: - case PERIPH_ID_UART1: - case PERIPH_ID_UART2: - case PERIPH_ID_UART3: - src = readl(&clk->src_peric0); - div = readl(&clk->div_peric0); - break; - case PERIPH_ID_I2C0: - case PERIPH_ID_I2C1: - case PERIPH_ID_I2C2: - case PERIPH_ID_I2C3: - case PERIPH_ID_I2C4: - case PERIPH_ID_I2C5: - case PERIPH_ID_I2C6: - case PERIPH_ID_I2C7: - src = 0; - sclk = get_pll_clk(MPLL); - sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit) & 0x7) + 1; - div = ((readl(&clk->div_top0) >> bit_info->prediv_bit) & 0x7) + 1; - return (sclk / sub_div) / div; - default: - return -1; - }; - - src = (src >> bit_info->src_bit) & ((1 << bit_info->n_src_bits) - 1); - if (src == SRC_MPLL) - sclk = get_pll_clk(MPLL); - else if (src == SRC_EPLL) - sclk = get_pll_clk(EPLL); - else if (src == SRC_VPLL) - sclk = get_pll_clk(VPLL); - else - return 0; - - sub_div = (div >> bit_info->div_bit) & 0xf; - sub_clk = sclk / (sub_div + 1); - - return sub_clk; -} - static void serial_setbrg_dev(void) { // struct s5p_uart *const uart = s5p_get_base_uart(dev_index); @@ -401,7 +55,7 @@ static void serial_setbrg_dev(void) // enum periph_id periph; // periph = exynos5_get_periph_id(base_port); - uclk = my_clock_get_periph_rate(PERIPH_ID_UART3); + uclk = clock_get_periph_rate(PERIPH_ID_UART3); val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); @@ -569,7 +223,7 @@ static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) { unsigned long freq, pres = 16, div; - freq = my_clock_get_periph_rate(PERIPH_ID_I2C0); + freq = clock_get_periph_rate(PERIPH_ID_I2C0); /* calculate prescaler and divisor values */ if ((freq / pres / (16 + 1)) > speed) /* set prescaler to 512 */ @@ -1222,391 +876,6 @@ static void power_init(void) REG_ENABLE, MAX77686_MV); } -struct mem_timings mem_timings[] = { - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .use_bpll = 0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, -}; - -struct arm_clk_ratios arm_clk_ratios[] = { - { - .arm_freq_mhz = 1700, - - .apll_mdiv = 0x1a9, - .apll_pdiv = 0x6, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - } -}; - -static void clock_init(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - struct exynos5_mct_regs *mct_regs = - (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; - struct mem_timings *mem = &mem_timings[0]; - struct arm_clk_ratios *arm_clk_ratio = &arm_clk_ratios[0]; - u32 val, tmp; - - /* Turn on the MCT as early as possible. */ - mct_regs->g_tcon |= (1 << 8); - -// mem = clock_get_mem_timings(); -// arm_clk_ratio = get_arm_ratios(); - - clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_cpu); - } while ((val | MUX_APLL_SEL_MASK) != val); - - clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_core1); - } while ((val | MUX_MPLL_SEL_MASK) != val); - - clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK); - tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK - | MUX_GPLL_SEL_MASK; - do { - val = readl(&clk->mux_stat_top2); - } while ((val | tmp) != val); - - clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_cdrex); - } while ((val | MUX_BPLL_SEL_MASK) != val); - - /* PLL locktime */ - writel(APLL_LOCK_VAL, &clk->apll_lock); - - writel(MPLL_LOCK_VAL, &clk->mpll_lock); - - writel(BPLL_LOCK_VAL, &clk->bpll_lock); - - writel(CPLL_LOCK_VAL, &clk->cpll_lock); - - writel(GPLL_LOCK_VAL, &clk->gpll_lock); - - writel(EPLL_LOCK_VAL, &clk->epll_lock); - - writel(VPLL_LOCK_VAL, &clk->vpll_lock); - - writel(CLK_REG_DISABLE, &clk->pll_div2_sel); - - writel(MUX_HPM_SEL_MASK, &clk->src_cpu); - do { - val = readl(&clk->mux_stat_cpu); - } while ((val | HPM_SEL_SCLK_MPLL) != val); - - val = arm_clk_ratio->arm2_ratio << 28 - | arm_clk_ratio->apll_ratio << 24 - | arm_clk_ratio->pclk_dbg_ratio << 20 - | arm_clk_ratio->atb_ratio << 16 - | arm_clk_ratio->periph_ratio << 12 - | arm_clk_ratio->acp_ratio << 8 - | arm_clk_ratio->cpud_ratio << 4 - | arm_clk_ratio->arm_ratio; - writel(val, &clk->div_cpu0); - do { - val = readl(&clk->div_stat_cpu0); - } while (0 != val); - - writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); - do { - val = readl(&clk->div_stat_cpu1); - } while (0 != val); - - /* Set APLL */ - writel(APLL_CON1_VAL, &clk->apll_con1); - val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, - arm_clk_ratio->apll_sdiv); - writel(val, &clk->apll_con0); - while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0) - ; - - /* Set MPLL */ - writel(MPLL_CON1_VAL, &clk->mpll_con1); - val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); - writel(val, &clk->mpll_con0); - while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0) - ; - - /* - * Configure MUX_MPLL_FOUT to choose the direct clock source - * path and avoid the fixed DIV/2 block to save power - */ - setbits_le32(&clk->pll_div2_sel, MUX_MPLL_FOUT_SEL); - - /* Set BPLL */ - if (mem->use_bpll) { - writel(BPLL_CON1_VAL, &clk->bpll_con1); - val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); - writel(val, &clk->bpll_con0); - while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0) - ; - - setbits_le32(&clk->pll_div2_sel, MUX_BPLL_FOUT_SEL); - } - - /* Set CPLL */ - writel(CPLL_CON1_VAL, &clk->cpll_con1); - val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); - writel(val, &clk->cpll_con0); - while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0) - ; - - /* Set GPLL */ - writel(GPLL_CON1_VAL, &clk->gpll_con1); - val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); - writel(val, &clk->gpll_con0); - while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0) - ; - - /* Set EPLL */ - writel(EPLL_CON2_VAL, &clk->epll_con2); - writel(EPLL_CON1_VAL, &clk->epll_con1); - val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); - writel(val, &clk->epll_con0); - while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0) - ; - - /* Set VPLL */ - writel(VPLL_CON2_VAL, &clk->vpll_con2); - writel(VPLL_CON1_VAL, &clk->vpll_con1); - val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); - writel(val, &clk->vpll_con0); - while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0) - ; - - writel(CLK_SRC_CORE0_VAL, &clk->src_core0); - writel(CLK_DIV_CORE0_VAL, &clk->div_core0); - while (readl(&clk->div_stat_core0) != 0) - ; - - writel(CLK_DIV_CORE1_VAL, &clk->div_core1); - while (readl(&clk->div_stat_core1) != 0) - ; - - writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); - while (readl(&clk->div_stat_sysrgt) != 0) - ; - - writel(CLK_DIV_ACP_VAL, &clk->div_acp); - while (readl(&clk->div_stat_acp) != 0) - ; - - writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); - while (readl(&clk->div_stat_syslft) != 0) - ; - - writel(CLK_SRC_TOP0_VAL, &clk->src_top0); - writel(CLK_SRC_TOP1_VAL, &clk->src_top1); - writel(TOP2_VAL, &clk->src_top2); - writel(CLK_SRC_TOP3_VAL, &clk->src_top3); - - writel(CLK_DIV_TOP0_VAL, &clk->div_top0); - while (readl(&clk->div_stat_top0)) - ; - - writel(CLK_DIV_TOP1_VAL, &clk->div_top1); - while (readl(&clk->div_stat_top1)) - ; - - writel(CLK_SRC_LEX_VAL, &clk->src_lex); - while (1) { - val = readl(&clk->mux_stat_lex); - if (val == (val | 1)) - break; - } - - writel(CLK_DIV_LEX_VAL, &clk->div_lex); - while (readl(&clk->div_stat_lex)) - ; - - writel(CLK_DIV_R0X_VAL, &clk->div_r0x); - while (readl(&clk->div_stat_r0x)) - ; - - writel(CLK_DIV_R0X_VAL, &clk->div_r0x); - while (readl(&clk->div_stat_r0x)) - ; - - writel(CLK_DIV_R1X_VAL, &clk->div_r1x); - while (readl(&clk->div_stat_r1x)) - ; - - if (mem->use_bpll) { - writel(MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL | - MUX_MCLK_DPHY_SEL, &clk->src_cdrex); - } else { - writel(CLK_REG_DISABLE, &clk->src_cdrex); - } - - writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); - while (readl(&clk->div_stat_cdrex)) - ; - - val = readl(&clk->src_cpu); - val |= CLK_SRC_CPU_VAL; - writel(val, &clk->src_cpu); - - val = readl(&clk->src_top2); - val |= CLK_SRC_TOP2_VAL; - writel(val, &clk->src_top2); - - val = readl(&clk->src_core1); - val |= CLK_SRC_CORE1_VAL; - writel(val, &clk->src_core1); - - writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); - writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); - while (readl(&clk->div_stat_fsys0)) - ; - - writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); - - writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); - writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); - - writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); - writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); - writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); - writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); - writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); - writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); - writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); - writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); - - /* FIMD1 SRC CLK SELECTION */ - writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); - - val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET - | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET - | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET - | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; - writel(val, &clk->div_fsys2); -} - #include <console/vtxprintf.h> #include <string.h> #define ZEROPAD 1 /* pad with zero */ @@ -1900,11 +1169,16 @@ int do_printk(int msg_level, const char *fmt, ...) void bootblock_mainboard_init(void); void bootblock_mainboard_init(void) { + struct mem_timings *mem; + struct arm_clk_ratios *arm_ratios; + /* FIXME: we should not need UART in bootblock, this is only done for testing purposes */ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); power_init(); - clock_init(); + mem = get_mem_timings(); + arm_ratios = get_arm_clk_ratios(); + system_clock_init(mem, arm_ratios); do_serial(); printk(BIOS_INFO, "%s: UART initialized\n", __func__); diff --git a/src/mainboard/google/snow/clocks.c b/src/mainboard/google/snow/clocks.c new file mode 100644 index 0000000..65ba39c --- /dev/null +++ b/src/mainboard/google/snow/clocks.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 The ChromiumOS Authors. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stddef.h> +#include <stdlib.h> + +#include <cpu/samsung/exynos5250/clock_init.h> + +struct arm_clk_ratios arm_clk_ratios[] = { + { + .arm_freq_mhz = 600, + + .apll_mdiv = 0xc8, + .apll_pdiv = 0x4, + .apll_sdiv = 0x1, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x2, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x1, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 800, + + .apll_mdiv = 0x64, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x3, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1000, + + .apll_mdiv = 0x7d, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x4, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1200, + + .apll_mdiv = 0x96, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x5, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1400, + + .apll_mdiv = 0xaf, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1700, + + .apll_mdiv = 0x1a9, + .apll_pdiv = 0x6, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + } +}; + +struct arm_clk_ratios *get_arm_clk_ratios(void) +{ + struct arm_clk_ratios *arm_ratio; + unsigned int arm_freq = 1700; /* FIXME: can we do better? */ + int i; + + for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); + i++, arm_ratio++) { + if (arm_ratio->arm_freq_mhz == arm_freq) + return arm_ratio; + } + + return NULL; +} diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index f11f1fa..ffab520 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -17,18 +17,60 @@ * MA 02111-1307 USA */ +#include <stdlib.h> +#include <gpio.h> #include <device/device.h> #include <console/console.h> -// mainboard_enable is executed as first thing after -// enumerate_buses(). +#include <cpu/samsung/exynos5-common/gpio.h> +#include <cpu/samsung/exynos5250/gpio.h> -static void mainboard_enable(device_t dev) +#include "mainboard.h" + +#define SNOW_BOARD_ID0_GPIO 88 /* GPD0, pin 0 */ +#define SNOW_BOARD_ID1_GPIO 89 /* GPD0, pin 1 */ + +struct { + enum mvl3 id0, id1; + enum snow_board_config config; +} snow_id_map[] = { + /* ID0 ID1 config */ + { LOGIC_0, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, + { LOGIC_0, LOGIC_1, SNOW_CONFIG_ELPIDA_MP }, + { LOGIC_1, LOGIC_0, SNOW_CONFIG_SAMSUNG_DVT }, + { LOGIC_1, LOGIC_1, SNOW_CONFIG_ELPIDA_DVT }, + { LOGIC_0, LOGIC_Z, SNOW_CONFIG_SAMSUNG_PVT }, + { LOGIC_1, LOGIC_Z, SNOW_CONFIG_ELPIDA_PVT }, + { LOGIC_Z, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, + { LOGIC_Z, LOGIC_Z, SNOW_CONFIG_ELPIDA_MP }, + { LOGIC_Z, LOGIC_1, SNOW_CONFIG_RSVD }, +}; + +int board_get_config(void) { - //dev->ops->init = mainboard_init; + int i; + int id0, id1; + enum snow_board_config config = SNOW_CONFIG_UNKNOWN; + + id0 = gpio_read_mvl3(SNOW_BOARD_ID0_GPIO); + id1 = gpio_read_mvl3(SNOW_BOARD_ID1_GPIO); + if (id0 < 0 || id1 < 0) + return -1; + printk(BIOS_DEBUG, "%s: id0: %u, id1: %u\n", __func__, id0, id1); + + for (i = 0; i < ARRAY_SIZE(snow_id_map); i++) { + if (id0 == snow_id_map[i].id0 && id1 == snow_id_map[i].id1) { + config = snow_id_map[i].config; + break; + } + } + + return config; } +#if 0 struct chip_operations mainboard_ops = { .name = "Samsung/Google ARM ChromeBook", .enable_dev = mainboard_enable, }; +#endif diff --git a/src/mainboard/google/snow/mainboard.h b/src/mainboard/google/snow/mainboard.h new file mode 100644 index 0000000..0047416 --- /dev/null +++ b/src/mainboard/google/snow/mainboard.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2013 The ChromeOS Authors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MAINBOARD_H +#define MAINBOARD_H + +enum snow_board_config { + SNOW_CONFIG_UNKNOWN = -1, + SNOW_CONFIG_SAMSUNG_EVT, + SNOW_CONFIG_ELPIDA_EVT, + SNOW_CONFIG_SAMSUNG_DVT, + SNOW_CONFIG_ELPIDA_DVT, + SNOW_CONFIG_SAMSUNG_PVT, + SNOW_CONFIG_ELPIDA_PVT, + SNOW_CONFIG_SAMSUNG_MP, + SNOW_CONFIG_ELPIDA_MP, + SNOW_CONFIG_RSVD, +}; + +int board_get_config(void); + +#endif /* MAINBOARD_H */ diff --git a/src/mainboard/google/snow/memory.c b/src/mainboard/google/snow/memory.c new file mode 100644 index 0000000..dd5da65 --- /dev/null +++ b/src/mainboard/google/snow/memory.c @@ -0,0 +1,492 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 The ChromiumOS Authors. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stddef.h> +#include <stdlib.h> +#include <console/console.h> + +#include <cpu/samsung/exynos5250/setup.h> +#include <cpu/samsung/exynos5250/dmc.h> +#include <cpu/samsung/exynos5250/clock_init.h> + +#include "mainboard.h" + +struct mem_timings mem_timings[] = { + { + .mem_manuf = MEM_MANUF_ELPIDA, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0x64, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .use_bpll = 0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010042, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36660f, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x4, + .phy1_tFS = 0x4, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x7, + .zq_mode_term = 0x1, + .zq_mode_noterm = 0, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_30_OHM, + .gate_leveling_enable = 0, + }, { + .mem_manuf = MEM_MANUF_SAMSUNG, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0x64, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .use_bpll = 0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010000, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36660f, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x8, + .phy1_tFS = 0x8, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x5, + .zq_mode_term = 0x1, + .zq_mode_noterm = 1, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_40_OHM, + .gate_leveling_enable = 1, + }, + { + .mem_manuf = MEM_MANUF_ELPIDA, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 780, + .mpll_mdiv = 0x64, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x82, + .bpll_pdiv = 0x4, + .bpll_sdiv = 0x0, + .use_bpll = 1, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010042, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36660f, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x4, + .phy1_tFS = 0x4, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x7, + .zq_mode_term = 0x1, + .zq_mode_noterm = 0, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_30_OHM, + .gate_leveling_enable = 0, + }, { + .mem_manuf = MEM_MANUF_SAMSUNG, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 780, + .mpll_mdiv = 0x64, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x82, + .bpll_pdiv = 0x4, + .bpll_sdiv = 0x0, + .use_bpll = 1, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010000, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36660f, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x8, + .phy1_tFS = 0x8, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x5, + .zq_mode_term = 0x1, + .zq_mode_noterm = 1, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_40_OHM, + .gate_leveling_enable = 1, + } +}; + +struct mem_timings *get_mem_timings(void) +{ + int i; + enum snow_board_config board_config; + enum ddr_mode mem_type; + unsigned int frequency_mhz; + enum mem_manuf mem_manuf; + struct mem_timings *mem; + + board_config = board_get_config(); + switch (board_config) { + case SNOW_CONFIG_ELPIDA_EVT: + case SNOW_CONFIG_ELPIDA_DVT: + case SNOW_CONFIG_ELPIDA_PVT: + case SNOW_CONFIG_ELPIDA_MP: + mem_manuf = MEM_MANUF_ELPIDA; + mem_type = DDR_MODE_DDR3; + frequency_mhz = 800; + break; + case SNOW_CONFIG_SAMSUNG_EVT: + case SNOW_CONFIG_SAMSUNG_DVT: + case SNOW_CONFIG_SAMSUNG_PVT: + case SNOW_CONFIG_SAMSUNG_MP: + mem_manuf = MEM_MANUF_SAMSUNG; + mem_type = DDR_MODE_DDR3; + frequency_mhz = 800; + break; + default: + printk(BIOS_CRIT, "Unable to determine board config\n"); + return NULL; + } + + for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); + i++, mem++) { + if (mem->mem_type == mem_type && + mem->frequency_mhz == frequency_mhz && + mem->mem_manuf == mem_manuf) + return mem; + } + + return NULL; +} diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c index fae371a..60057f9 100644 --- a/src/mainboard/google/snow/romstage.c +++ b/src/mainboard/google/snow/romstage.c @@ -24,13 +24,15 @@ #include <cbfs.h> #include <common.h> -#include <cpu/samsung/exynos5250/setup.h> +//#include <cpu/samsung/exynos5250/setup.h> #include <cpu/samsung/exynos5250/dmc.h> -#include <cpu/samsung/exynos5250/clock_init.h> +#include <cpu/samsung/exynos5250/setup.h> +//#include <cpu/samsung/exynos5250/clock_init.h> #include <console/console.h> -#include <arch/bootblock_exit.h> #include <arch/stages.h> +#include "mainboard.h" + void main(void) { struct cbfs_media cbfs; @@ -43,35 +45,37 @@ void main(void) struct mem_timings *mem; int ret; - mem = clock_get_mem_timings(); - printk(BIOS_SPEW, "clock_get_mem_timings returns 0x%p\n", mem); + mem = get_mem_timings(); + if (!mem) { + printk(BIOS_CRIT, "Unable to auto-detect memory timings\n"); + while(1); + } printk(BIOS_SPEW, "man: 0x%x type: 0x%x, div: 0x%x, mhz: 0x%x\n", mem->mem_manuf, mem->mem_type, mem->mpll_mdiv, mem->frequency_mhz); - ret = ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE); - if (ret) { - printk(BIOS_ERR, "Memory controller init failed, err: %x\n", - ret); - while(1); - } + ret = ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE); + if (ret) { + printk(BIOS_ERR, "Memory controller init failed, err: %x\n", + ret); + while(1); + } - printk(BIOS_INFO, "ddr3_init done\n"); + printk(BIOS_INFO, "ddr3_init done\n"); /* wow, did it work? */ int i; u32 *c = (void *)CONFIG_RAMBASE; -// mmu_setup(CONFIG_SYS_SDRAM_BASE, CONFIG_DRAM_SIZE_MB * 1024); -// printk(BIOS_INFO, "mmu_setup done\n"); - for(i = 0; i < 16384; i++) + for(i = 0; i < 16384; i++) c[i] = i+32768; for(i = 0; i < 16384; i++) if (c[i] != i+32768) printk(BIOS_SPEW, "BADc[%02x]: %02x,", i, c[i]); for(i = 0; i < 1048576; i++) c[i] = 0; + ret = init_default_cbfs_media(&cbfs); if (ret){ printk(BIOS_ERR, "init_default_cbfs_media returned %d: HALT\n",

1 0

New patch to review for coreboot: 5d707fb exynos/s5p: Add helper function for reading a single MVL3 GPIO
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2266 -gerrit commit 5d707fb5e7df4d350eedd757b5601d8acc9dbb8e Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 17:02:36 2013 -0800 exynos/s5p: Add helper function for reading a single MVL3 GPIO This adds a helper function to read only a single GPIO which uses 3-state logic. Examples of this typically include board straps which are used to provide mainboard-specific information at the hardware- level, such as board revision or configuration options. This is part of a larger clean-up effort for Snow. We may want to genericise this for other CPUs in the future. Change-Id: Ic44f5e589cda89b419a07eca246847e9ce7dcd8d Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/cpu/samsung/exynos5250/gpio.h | 9 +++++ src/cpu/samsung/s5p-common/s5p_gpio.c | 69 ++++++++++++++++++++++------------- 2 files changed, 53 insertions(+), 25 deletions(-) diff --git a/src/cpu/samsung/exynos5250/gpio.h b/src/cpu/samsung/exynos5250/gpio.h index 7606262..1214384 100644 --- a/src/cpu/samsung/exynos5250/gpio.h +++ b/src/cpu/samsung/exynos5250/gpio.h @@ -477,6 +477,15 @@ void gpio_set_rate(int gpio, int mode); */ int gpio_decode_number(unsigned gpio_list[], int count); +/* + * similar to gpio_decode_number, but reads only a single GPIO + * + * @param gpio GPIO to read + * @return -1 if the value cannot be determined. Otherwise returns + * the corresponding MVL3 enum value. + */ +int gpio_read_mvl3(unsigned gpio); + void gpio_info(void); #endif /* EXYNOS5250_GPIO_H_ */ diff --git a/src/cpu/samsung/s5p-common/s5p_gpio.c b/src/cpu/samsung/s5p-common/s5p_gpio.c index 50c4519..8332015 100644 --- a/src/cpu/samsung/s5p-common/s5p_gpio.c +++ b/src/cpu/samsung/s5p-common/s5p_gpio.c @@ -414,42 +414,61 @@ int gpio_set_value(unsigned gpio, int value) */ #define GPIO_DELAY_US 5 -/* FIXME(dhendrix): this should probably go to a more generic location */ +int gpio_read_mvl3(unsigned gpio) +{ + int high, low; + enum mvl3 value; + + if (gpio >= GPIO_MAX_PORT) + return -1; + + gpio_direction_input(gpio); + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + udelay(GPIO_DELAY_US); + high = gpio_get_value(gpio); + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_DOWN); + udelay(GPIO_DELAY_US); + low = gpio_get_value(gpio); + + if (high && low) /* external pullup */ + value = LOGIC_1; + else if (!high && !low) /* external pulldown */ + value = LOGIC_0; + else /* floating */ + value = LOGIC_Z; + + /* + * Check if line is externally pulled high and + * configure the internal pullup to match. For + * floating and pulldowns, the GPIO is already + * configured with an internal pulldown from the + * above test. + */ + if (value == LOGIC_1) + gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + + return value; +} + int gpio_decode_number(unsigned gpio_list[], int count) { int result = 0; int multiplier = 1; - int value, high, low; - int gpio, i; + int gpio, i, value; + enum mvl3 mvl3; for (i = 0; i < count; i++) { gpio = gpio_list[i]; - if (gpio >= GPIO_MAX_PORT) - return -1; - gpio_direction_input(gpio); - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); - udelay(GPIO_DELAY_US); - high = gpio_get_value(gpio); - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_DOWN); - udelay(GPIO_DELAY_US); - low = gpio_get_value(gpio); - if (high && low) /* external pullup */ + mvl3 = gpio_read_mvl3(gpio); + if (mvl3 == LOGIC_1) value = 2; - else if (!high && !low) /* external pulldown */ + else if (mvl3 == LOGIC_0) value = 1; - else /* floating */ + else if (mvl3 == LOGIC_Z) value = 0; - - /* - * Check if line is externally pulled high and - * configure the internal pullup to match. For - * floating and pulldowns, the GPIO is already - * configured with an internal pulldown from the - * above test. - */ - if (value == 2) - gpio_set_pull(gpio, EXYNOS_GPIO_PULL_UP); + else + return -1; result += value * multiplier; multiplier *= 3;

1 0

New patch to review for coreboot: 7029d30 add gpio.h for generic GPIO-related definitions
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2265 -gerrit commit 7029d30c64c45d18de33640ac6a2e2c102ca3e22 Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 16:57:11 2013 -0800 add gpio.h for generic GPIO-related definitions This adds /src/include/gpio.h which currently contains generic GPIO enums for type (in/out/alt) and 3-state logic. The header was originally written for another FOSS project (mosys) and thus the BSD license. Change-Id: Id1dff69169e8b1ec372107737d356b0fa0d80498 Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/include/gpio.h | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/src/include/gpio.h b/src/include/gpio.h new file mode 100644 index 0000000..f602b1e --- /dev/null +++ b/src/include/gpio.h @@ -0,0 +1,63 @@ +/* + * Copyright 2012, Google Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Google Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef GPIO_H +#define GPIO_H + +enum gpio_types { + GPIO_IN, + GPIO_OUT, + GPIO_ALT, /* catch-all for alternate functions */ +}; + +/* + * Many-value logic (3 states). This can be used for inputs whereby presence + * of external pull-up or pull-down resistors can be added to overcome internal + * pull-ups/pull-downs and force a single value. + * + * Thus, external pull resistors can force a 0 or 1 and if the value changes + * along with internal pull-up/down enable then the input is floating. + * + * Vpd | Vpu | MVL + * ----------------- + * 0 | 0 | 0 + * ----------------- + * 0 | 1 | Z <-- floating input will follow internal pull up/down + * ----------------- + * 1 | 1 | 1 + */ +enum mvl3 { + LOGIC_0, + LOGIC_1, + LOGIC_Z, /* high impedence / tri-stated / floating */ +}; + +#endif /* GPIO_H */

1 0

Patch set updated for coreboot: 67badbf exynos5250: remove CPU check from samsung_get_base_* macro
by David Hendricks 03 Feb '13

03 Feb '13

David Hendricks (dhendrix(a)chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2264 -gerrit commit 67badbf65e7a7d1082d2a3bb26749bfad0bb2e74 Author: David Hendricks <dhendrix(a)chromium.org> Date: Sat Feb 2 20:19:58 2013 -0800 exynos5250: remove CPU check from samsung_get_base_* macro The cpu_is_exynos5() macro seems broken at the moment, so skip it. The macro is superfluous and will probably be replaced eventually, but at least this will un-break usage sites. Change-Id: Ibd360cbfa18047ad8a3488d4f24c3fc4d7415eba Signed-off-by: David Hendricks <dhendrix(a)chromium.org> --- src/cpu/samsung/exynos5250/cpu.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/src/cpu/samsung/exynos5250/cpu.h b/src/cpu/samsung/exynos5250/cpu.h index f399a42..b859823 100644 --- a/src/cpu/samsung/exynos5250/cpu.h +++ b/src/cpu/samsung/exynos5250/cpu.h @@ -81,11 +81,19 @@ #ifndef __ASSEMBLER__ +/* FIXME(dhendrix): cpu_is_exynos5() seems broken atm... */ +#if 0 #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ return cpu_is_exynos5() ? EXYNOS5_##base : 0; \ } +#endif +#define SAMSUNG_BASE(device, base) \ +static inline unsigned int samsung_get_base_##device(void) \ +{ \ + return EXYNOS5_##base; \ +} SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE)

1 0

← Newer
1
...
71
72
73
74
75
76
77
78
79
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2013