coreboot March 2012

coreboot@coreboot.org

58 participants
718 discussions

MSI-Motherboard MS-6340
by Lorenz Wenner 27 Mar '12

27 Mar '12

Hello folks, i have a motherboard which i could not find on the table of supported motherboards, so i did the Steps described in he FAQ: Step 1: i did dmidecode | grep -C3 'Base Board Information' and got this: Base Board Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-6340(VT8363) Version: Serial Number: hope that is enough Step 2: lspci -tvnn gives me this: -[0000:00]-+-00.0 VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] +-01.0-[01]----00.0 ATI Technologies Inc 3D Rage Pro AGP 1X/2X [1002:4742] +-07.0 VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] +-07.1 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] +-07.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-07.3 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] +-07.4 VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] +-0a.0 Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029] \-0f.0 Ensoniq 5880B [AudioPCI] [1274:5880] Step 3: superiotool -dV says this: superiotool r6637 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x164e... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O at 0x164e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x2e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x4e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... Super I/O enabled, Super I/O configuration disabled Found VIA VT82C686A/VT82C686B (id=0x003c, rev=0x00) at 0x3f0 Probing for Server Engines Super I/O at 0x2e... Failed. Returned data: id=0xffff, rev=0xff Step 4: flashrom -V answered in this way: flashrom v0.9.5.1-r1508 on Linux 3.2.0-1-686-pae (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 648M loops per second, 10 myus = 11 us, 100 myus = 112 us, 1000 myus = 1124 us, 10000 myus = 10052 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string system-product-name: "MS-6340" DMI string system-version: " " DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-6340(VT8363)" DMI string baseboard-version: " " DMI string chassis-type: "Unknown" DMI chassis-type is not specific enough. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. since the computer is not a Laptop/Notebook/Netbook, i also did as i was told, namely "flashrom -Vp internal:laptop=this_is_not_a_laptop" and this time the output was the above (except "Aborting") plus the following lines: Proceeding anyway because user forced us to. Found chipset "VIA VT82C686A/B" with PCI ID 1106:0686. Enabling flash write... OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x25, id2 0xa8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Found Winbond flash chip "W49F002U/N" (256 kB, Parallel) at physical address 0xfffc0000. Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x0b Found Winbond flash chip "W49F002U/N" (256 kB, Parallel). No operations were specified. Restoring PCI config space for 00:07:0 reg 0x40 Restoring PCI config space for 00:07:0 reg 0x43 I hope these Informations can help to improve coreboot by widening the range of supported boards. I have one more question: my goal is to enable the computer to PXE-boot via WLAN. I read about the ipxe payload, but i do not know how to make an elf- image form the ipxe-sourcecode. The only thing i found was an option to obtain an efi-image. Is that the same? Please excuse my foolish question, but this is my first attempt ever to build a bios. -> You guys rock, this is so cool! Regards Lorenz

3 2

Patch merged into coreboot/master: 82d775d Add bifferboard
by gerrit＠coreboot.org 27 Mar '12

27 Mar '12

the following patch was just integrated into master: commit 82d775d53fa2b4394e78b28e3a7ad7d06b0644a5 Author: Rudolf Marek <r.marek(a)assembler.cz> Date: Sun Mar 25 19:55:43 2012 +0200 Add bifferboard This commit adds support for Bifferboard, a 32MB 486 PC Change-Id: Iad790ebf242ef07bf6298f8e3577783e5e743113 Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Build-Tested: build bot (Jenkins) at Tue Mar 27 01:23:23 2012, giving +1 Reviewed-By: Stefan Reinauer <stefan.reinauer(a)coreboot.org> at Tue Mar 27 18:40:45 2012, giving +2 See http://review.coreboot.org/810 for details. -gerrit

1 0

Patch merged into coreboot/master: 8c0a8fe Add 64KB romchip chip size
by gerrit＠coreboot.org 27 Mar '12

27 Mar '12

the following patch was just integrated into master: commit 8c0a8fe1d3e0e86e54f4fe8f6beae89e5c09a40c Author: Rudolf Marek <r.marek(a)assembler.cz> Date: Sun Mar 25 19:19:03 2012 +0200 Add 64KB romchip chip size This is handy for bifferboard to provide same size as original bootloader. Change-Id: I179917d8c6354fa55cebdd70918a96cd299c4f3c Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Build-Tested: build bot (Jenkins) at Tue Mar 27 01:06:24 2012, giving +1 Reviewed-By: Stefan Reinauer <stefan.reinauer(a)coreboot.org> at Tue Mar 27 18:39:27 2012, giving +2 See http://review.coreboot.org/809 for details. -gerrit

1 0

Patch merged into coreboot/master: b6f0543 Add support for RDC R8610 Southbridge
by gerrit＠coreboot.org 27 Mar '12

27 Mar '12

the following patch was just integrated into master: commit b6f054306fac451e15796b0f8a2543cfe0da71df Author: Rudolf Marek <r.marek(a)assembler.cz> Date: Sun Mar 25 18:16:11 2012 +0200 Add support for RDC R8610 Southbridge So far it just setups things right for Bifferboard. We may change it in the future to fit other hardware. Change-Id: I1c4ccff4e47b9cb9e31a738f038fc4f4ebe59087 Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Build-Tested: build bot (Jenkins) at Tue Mar 27 00:50:05 2012, giving +1 Reviewed-By: Stefan Reinauer <stefan.reinauer(a)coreboot.org> at Tue Mar 27 18:39:02 2012, giving +2 See http://review.coreboot.org/808 for details. -gerrit

1 0

Patch merged into coreboot/master: a8fdb3b Add the support for RDC R8610 Northbridge
by gerrit＠coreboot.org 27 Mar '12

27 Mar '12

the following patch was just integrated into master: commit a8fdb3bed14a89b05940130bb6369664ab1cfcaf Author: Rudolf Marek <r.marek(a)assembler.cz> Date: Sun Mar 25 18:14:02 2012 +0200 Add the support for RDC R8610 Northbridge So far the it just setups the internal resource management for coreboot and detects the memory size. Change-Id: I8506390fa6656abfa40d92b8f6ede9b91fe98680 Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Build-Tested: build bot (Jenkins) at Tue Mar 27 00:32:37 2012, giving +1 Reviewed-By: Stefan Reinauer <stefan.reinauer(a)coreboot.org> at Tue Mar 27 18:37:57 2012, giving +2 See http://review.coreboot.org/807 for details. -gerrit

1 0

Re: [coreboot] porting Coreboot to a new motherboard....
by ron minnich 27 Mar '12

27 Mar '12

On Tue, Mar 27, 2012 at 2:23 AM, ali hagigat <hagigatali(a)gmail.com> wrote: > My RAM code was OK(I remember all the members of this mailing list > said:"your RAM initialization is not OK", if RAM is not OK how > "romstage", "ramstage" and now "filo" are being executed!! I've had this work with RAM that is not OK. > Now "ramstage" part is copied into RAM and executed and i have added > FILO 0.5.6 as a payload. main() function of FILO is executed and tried > to read vmlinuz and initrd from harddisk and copy them to 0x100000. > Every thing is OK, IDE is initialized correctly and it seems that > those files are read and copied well. (/boot and all its files and > folders are recognized even lost+found !!) Yes, I've also had this work with RAM that is not ok. however did you try out earlyprintk to a serial port to see how far the kernel is booting? Did you ever run memtest? ron

1 0

Patch merged into coreboot/master: e4cda7e Add RDC R8610 PCI IDs.
by gerrit＠coreboot.org 27 Mar '12

27 Mar '12

the following patch was just integrated into master: commit e4cda7e562ca9cd487df9775a076f401b7bf7836 Author: Rudolf Marek <r.marek(a)assembler.cz> Date: Sun Mar 25 15:58:09 2012 +0200 Add RDC R8610 PCI IDs. Change-Id: I3f3585f15265aa1377f72ba23accf1adb08cb8ac Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Reviewed-By: Patrick Georgi <patrick(a)georgi-clan.de> at Tue Mar 27 11:56:17 2012, giving +2 See http://review.coreboot.org/806 for details. -gerrit

1 0

Patch set updated for coreboot: 667b587 Add Southbridge support for S3.
by Zheng Bao 27 Mar '12

27 Mar '12

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/621 -gerrit commit 667b587d3badf6f9134645115811372646638f59 Author: zbao <fishbaozi(a)gmail.com> Date: Fri Mar 23 11:38:15 2012 +0800 Add Southbridge support for S3. 1. Add some CIMX call for S3. 2. Detect sleep type. Change-Id: I62888e8d8a03987ca88f5c935fa660f6b49a4fe9 Signed-off-by: Zheng Bao <zheng.bao(a)amd.com> Signed-off-by: zbao <fishbaozi(a)gmail.com> --- src/southbridge/amd/cimx/sb800/cfg.c | 65 +++++++++++++++++++++++++++-- src/southbridge/amd/cimx/sb800/early.c | 8 ++++ src/southbridge/amd/cimx/sb800/late.c | 19 +++++++++ src/southbridge/amd/cimx/sb800/lpc.c | 4 +- src/southbridge/amd/cimx/sb800/lpc.h | 3 + src/southbridge/amd/cimx/sb800/sb_cimx.h | 4 ++ 6 files changed, 97 insertions(+), 6 deletions(-) diff --git a/src/southbridge/amd/cimx/sb800/cfg.c b/src/southbridge/amd/cimx/sb800/cfg.c index a9e35bc..2a2ad2b 100644 --- a/src/southbridge/amd/cimx/sb800/cfg.c +++ b/src/southbridge/amd/cimx/sb800/cfg.c @@ -17,10 +17,63 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - +#include <console/console.h> #include "SBPLATFORM.h" #include "cfg.h" +#include <cbmem.h> + +#include <arch/io.h> +#include <arch/acpi.h> + +#define SB800_ACPI_IO_BASE 0x800 + +#define ACPI_PM_EVT_BLK (SB800_ACPI_IO_BASE + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (SB800_ACPI_IO_BASE + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (SB800_ACPI_IO_BASE + 0x0E) /* 1 byte */ +#define ACPI_PM_TMR_BLK (SB800_ACPI_IO_BASE + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (SB800_ACPI_IO_BASE + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTROL (SB800_ACPI_IO_BASE + 0x08) /* 6 bytes */ + +#if CONFIG_HAVE_ACPI_RESUME == 1 +int acpi_get_sleep_type(void) +{ + u16 tmp = inw(ACPI_PM1_CNT_BLK); + tmp = ((tmp & (7 << 10)) >> 10); + printk(BIOS_DEBUG, "SLP_TYP type was %x\n", tmp); + return (int)tmp; +} +#endif + +#define BIOSRAM_INDEX 0xcd4 +#define BIOSRAM_DATA 0xcd5 + +#ifndef __PRE_RAM__ +void set_cbmem_toc(struct cbmem_entry *toc) +{ + u32 dword = (u32) toc; + int nvram_pos = 0xf8, i; /* temp */ + printk(BIOS_DEBUG, "dword=%x\n", dword); + for (i = 0; i<4; i++) { + printk(BIOS_DEBUG, "nvram_pos=%x, dword>>(8*i)=%x\n", nvram_pos, (dword >>(8 * i)) & 0xff); + outb(nvram_pos, BIOSRAM_INDEX); + outb((dword >>(8 * i)) & 0xff , BIOSRAM_DATA); + nvram_pos++; + } +} +#endif +struct cbmem_entry *get_cbmem_toc(void) +{ + u32 xdata = 0; + int xnvram_pos = 0xf8, xi; + for (xi = 0; xi<4; xi++) { + outb(xnvram_pos, BIOSRAM_INDEX); + xdata &= ~(0xff << (xi * 8)); + xdata |= inb(BIOSRAM_DATA) << (xi *8); + xnvram_pos++; + } + return (struct cbmem_entry *) xdata; +} /** * @brief South Bridge CIMx configuration @@ -30,10 +83,13 @@ */ void sb800_cimx_config(AMDSBCFG *sb_config) { - if (!sb_config) { + if (!sb_config) return; - } - //memset(sb_config, 0, sizeof(AMDSBCFG)); + +#if CONFIG_HAVE_ACPI_RESUME == 1 + if (acpi_get_sleep_type() == 3) + sb_config->S3Resume = 1; +#endif /* header */ sb_config->StdHeader.PcieBasePtr = PCIEX_BASE_ADDRESS; @@ -132,4 +188,3 @@ void sb800_cimx_config(AMDSBCFG *sb_config) } #endif //!__PRE_RAM__ } - diff --git a/src/southbridge/amd/cimx/sb800/early.c b/src/southbridge/amd/cimx/sb800/early.c index 9d49a52..f692897 100644 --- a/src/southbridge/amd/cimx/sb800/early.c +++ b/src/southbridge/amd/cimx/sb800/early.c @@ -23,9 +23,11 @@ #include <device/pci_ids.h> #include <arch/io.h> /* inl, outl */ #include <arch/romcc_io.h> /* device_t */ +#include <arch/acpi.h> #include "SBPLATFORM.h" #include "sb_cimx.h" #include "cfg.h" /*sb800_cimx_config*/ +#include "cbmem.h" #if CONFIG_RAMINIT_SYSINFO == 1 @@ -80,3 +82,9 @@ void sb800_clk_output_48Mhz(void) *(volatile u32 *)(ACPI_MMIO_BASE + MISC_BASE + 0x40) |= 1 << 1; /* 48Mhz */ } +#if CONFIG_HAVE_ACPI_RESUME == 1 +int acpi_is_wakeup_early(void) +{ + return (acpi_get_sleep_type() == 3); +} +#endif diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index 8c7abdb..c69782b 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -24,6 +24,7 @@ #include <arch/ioapic.h> #include <device/smbus.h> /* smbus_bus_operations */ #include <console/console.h> /* printk */ +#include <arch/acpi.h> #include "lpc.h" /* lpc_read_resources */ #include "SBPLATFORM.h" /* Platfrom Specific Definitions */ #include "cfg.h" /* sb800 Cimx configuration */ @@ -351,6 +352,17 @@ void sb_Late_Post(void) AmdSbDispatcher(sb_config); } +void sb_Before_Pci_Restore_Init(void) +{ + sb_config->StdHeader.Func = SB_BEFORE_PCI_RESTORE_INIT; + AmdSbDispatcher(sb_config); +} + +void sb_After_Pci_Restore_Init(void) +{ + sb_config->StdHeader.Func = SB_AFTER_PCI_RESTORE_INIT; + AmdSbDispatcher(sb_config); +} /** * @brief SB Cimx entry point sbBeforePciInit wrapper @@ -468,7 +480,14 @@ static void sb800_enable(device_t dev) /* call the CIMX entry at the last sb800 device, * so make sure the mainboard devicetree is complete */ +#if CONFIG_HAVE_ACPI_RESUME == 1 + if (acpi_slp_type != 3) + sb_Before_Pci_Init(); + else + sb_Before_Pci_Restore_Init(); +#else sb_Before_Pci_Init(); +#endif break; default: diff --git a/src/southbridge/amd/cimx/sb800/lpc.c b/src/southbridge/amd/cimx/sb800/lpc.c index bc643b5..472817d 100644 --- a/src/southbridge/amd/cimx/sb800/lpc.c +++ b/src/southbridge/amd/cimx/sb800/lpc.c @@ -20,7 +20,9 @@ #include <console/console.h> #include <device/pci.h> #include "lpc.h" - +#include <bitops.h> +#include <arch/io.h> +#include <cbmem.h> void lpc_read_resources(device_t dev) { diff --git a/src/southbridge/amd/cimx/sb800/lpc.h b/src/southbridge/amd/cimx/sb800/lpc.h index 7b165f8..f6ffd53 100644 --- a/src/southbridge/amd/cimx/sb800/lpc.h +++ b/src/southbridge/amd/cimx/sb800/lpc.h @@ -21,6 +21,9 @@ #define _SB800_LPC_H_ +#define BIOSRAM_INDEX 0xcd4 +#define BIOSRAM_DATA 0xcd5 + #define SPIROM_BASE_ADDRESS 0xA0 /* SPI ROM base address */ void lpc_read_resources(device_t dev); diff --git a/src/southbridge/amd/cimx/sb800/sb_cimx.h b/src/southbridge/amd/cimx/sb800/sb_cimx.h index 42a7ba9..5e510de 100644 --- a/src/southbridge/amd/cimx/sb800/sb_cimx.h +++ b/src/southbridge/amd/cimx/sb800/sb_cimx.h @@ -29,6 +29,10 @@ void sb_Before_Pci_Init(void); void sb_After_Pci_Init(void); void sb_Mid_Post_Init(void); void sb_Late_Post(void); +void sb_Before_Pci_Restore_Init(void); +void sb_After_Pci_Restore_Init(void); + +int acpi_is_wakeup_early(void); /** * CIMX not set the clock to 48Mhz until sbBeforePciInit,

1 0

Patch set updated for coreboot: 9771dfc Add sb800 spi support.
by Zheng Bao 27 Mar '12

27 Mar '12

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/620 -gerrit commit 9771dfc1f0e11439fb21f7d9990032a32f3a8d28 Author: zbao <fishbaozi(a)gmail.com> Date: Fri Mar 23 11:36:08 2012 +0800 Add sb800 spi support. It is for S3, storing the recovring data in the nonvolatile storage, i.e., flash. Change-Id: Ie9e4f42a80c93d92d2e442f0e833ce06d88294f9 Signed-off-by: Zheng Bao <zheng.bao(a)amd.com> Signed-off-by: zbao <fishbaozi(a)gmail.com> --- src/southbridge/amd/cimx/sb800/Makefile.inc | 2 + src/southbridge/amd/cimx/sb800/SBPLATFORM.h | 4 + src/southbridge/amd/cimx/sb800/spi.c | 209 +++++++++++++++++++++++++++ src/southbridge/amd/cimx/sb800/spi.h | 42 ++++++ 4 files changed, 257 insertions(+), 0 deletions(-) diff --git a/src/southbridge/amd/cimx/sb800/Makefile.inc b/src/southbridge/amd/cimx/sb800/Makefile.inc index 30d2133..2b55fee 100644 --- a/src/southbridge/amd/cimx/sb800/Makefile.inc +++ b/src/southbridge/amd/cimx/sb800/Makefile.inc @@ -27,6 +27,8 @@ romstage-y += smbus.c ramstage-y += cfg.c ramstage-y += late.c +ramstage-$(CONFIG_HAVE_ACPI_RESUME) += spi.c + driver-y += smbus.c driver-y += lpc.c diff --git a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h index db5343d..25aba95 100644 --- a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h +++ b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h @@ -158,4 +158,8 @@ typedef union _PCI_ADDR { #include "vendorcode/amd/cimx/sb800/AMDSBLIB.h" +#if CONFIG_HAVE_ACPI_RESUME == 1 +#include "spi.h" +#endif + #endif // _AMD_SBPLATFORM_H_ diff --git a/src/southbridge/amd/cimx/sb800/spi.c b/src/southbridge/amd/cimx/sb800/spi.c new file mode 100644 index 0000000..b0ef753 --- /dev/null +++ b/src/southbridge/amd/cimx/sb800/spi.c @@ -0,0 +1,209 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include "SBPLATFORM.h" + + +void execute_command(volatile u8 * spi_address) +{ + *(spi_address + 2) |= 1; +} + +void wait4command_complete(volatile u8 * spi_address) +{ + while (*(spi_address + 2) & 1) + printk(BIOS_DEBUG, "wait4CommandComplete\n"); +} + +void reset_internal_fifo_pointer(volatile u8 * spi_address) +{ + u8 val; + + do { + *(spi_address + 2) |= 0x10; + val = *(spi_address + 0xd); + } while (val & 0x7); +} + +u8 read_spi_status(volatile u8 * spi_address) +{ + u8 val; + *spi_address = 0x05; + *(spi_address + 1) = 0x11; + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = 0x0; /* dummy */ + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + reset_internal_fifo_pointer(spi_address); + val = *(spi_address + 0xC); + val = *(spi_address + 0xC); + return val; +} + +void wait4flashpart_ready(volatile u8 * spi_address) +{ + while (read_spi_status(spi_address) & 1) ; +} + +void write_spi_status(volatile u8 * spi_address, u8 status) +{ + *spi_address = 0x50; /* EWSR */ + *(spi_address + 1) = 0; /* RxByte=TxByte=0 */ + execute_command(spi_address); + wait4command_complete(spi_address); + + *spi_address = 0x01; /* WRSR */ + *(spi_address + 1) = 0x01; + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = status; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); + + read_spi_status(spi_address); +} + +void read_spi_id(volatile u8 * spi_address) +{ + u8 mid = 0, did = 0; + *spi_address = 0x90; + *(spi_address + 1) = 0x23; /* RxByte=2, TxByte=3 */ + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = 0; + *(spi_address + 0xC) = 0; + *(spi_address + 0xC) = 0; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + reset_internal_fifo_pointer(spi_address); + mid = *(spi_address + 0xC); + printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did); + mid = *(spi_address + 0xC); + printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did); + mid = *(spi_address + 0xC); + printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did); + + mid = *(spi_address + 0xC); + did = *(spi_address + 0xC); + printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did); +} + +void spi_write_enable(volatile u8 * spi_address) +{ + *spi_address = 0x06; /* Write Enable */ + *(spi_address + 1) = 0x0; /* RxByte=0, TxByte=0 */ + execute_command(spi_address); + wait4command_complete(spi_address); +} + +void sector_erase_spi(volatile u8 * spi_address, u32 address) +{ + spi_write_enable(spi_address); + *spi_address = 0x20; + *(spi_address + 1) = 0x03; /* RxByte=0, TxByte=3 */ + + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = (address >> 16) & 0xFF; + *(spi_address + 0xC) = (address >> 8) & 0xFF; + *(spi_address + 0xC) = (address >> 0) & 0xFF; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); +} + +void chip_erase_spi(volatile u8 * spi_address) +{ + spi_write_enable(spi_address); + *spi_address = 0xC7; + *(spi_address + 1) = 0x00; + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); +} + +void byte_program(volatile u8 * spi_address, u32 address, u32 data) +{ + spi_write_enable(spi_address); + *spi_address = 0x02; + *(spi_address + 1) = 0x0 << 4 | 4; + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = (address >> 16) & 0xFF; + *(spi_address + 0xC) = (address >> 8) & 0xFF; + *(spi_address + 0xC) = (address >> 0) & 0xFF; + *(spi_address + 0xC) = data & 0xFF; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); +} + +void dword_noneAAI_program(volatile u8 * spi_address, u32 address, u32 data) +{ + u8 i; + /* + * printk(BIOS_SPEW, "%s: addr=%x, data=%x\n", __func__, address, data); + */ + for (i = 0; i < 4; i++) { + spi_write_enable(spi_address); + *spi_address = 0x02; + *(spi_address + 1) = 0x0 << 4 | 4; + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = (address >> 16) & 0xFF; + *(spi_address + 0xC) = (address >> 8) & 0xFF; + *(spi_address + 0xC) = (address >> 0) & 0xFF; + *(spi_address + 0xC) = data & 0xFF; + data >>= 8; + address++; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); + } +} + +void dword_program(volatile u8 * spi_address, u32 address, u32 data) +{ + spi_write_enable(spi_address); + *spi_address = 0x02; + *(spi_address + 1) = 0x0 << 4 | 7; + reset_internal_fifo_pointer(spi_address); + *(spi_address + 0xC) = (address >> 16) & 0xFF; + *(spi_address + 0xC) = (address >> 8) & 0xFF; + *(spi_address + 0xC) = (address >> 0) & 0xFF; + *(spi_address + 0xC) = data & 0xFF; + *(spi_address + 0xC) = (data >> 8) & 0xFF; + *(spi_address + 0xC) = (data >> 16) & 0xFF; + *(spi_address + 0xC) = (data >> 24) & 0xFF; + reset_internal_fifo_pointer(spi_address); + execute_command(spi_address); + wait4command_complete(spi_address); + wait4flashpart_ready(spi_address); +} + +void direct_byte_program(volatile u8 * spi_address, volatile u32 * address, u32 data) +{ + spi_write_enable(spi_address); + *address = data; + wait4flashpart_ready(spi_address); +} diff --git a/src/southbridge/amd/cimx/sb800/spi.h b/src/southbridge/amd/cimx/sb800/spi.h new file mode 100644 index 0000000..57921d9 --- /dev/null +++ b/src/southbridge/amd/cimx/sb800/spi.h @@ -0,0 +1,42 @@ +/* + ***************************************************************************** + * + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * *************************************************************************** + * + */ + +#ifndef _SB800_CIMX_SPI_H_ +#define _SB800_CIMX_SPI_H_ + +void execute_command(volatile u8 * spi_address); +void wait4command_complete(volatile u8 * spi_address); +void reset_internal_fifo_pointer(volatile u8 * spi_address); +u8 read_spi_status(volatile u8 * spi_address); +void wait4flashpart_ready(volatile u8 * spi_address); +void write_spi_status(volatile u8 * spi_address, u8 status); +void read_spi_id(volatile u8 * spi_address); +void spi_write_enable(volatile u8 * spi_address); +void sector_erase_spi(volatile u8 * spi_address, u32 address); +void chip_erase_spi(volatile u8 * spi_address); +void byte_program(volatile u8 * spi_address, u32 address, u32 data); +void dword_noneAAI_program(volatile u8 * spi_address, u32 address, u32 data); +void dword_program(volatile u8 * spi_address, u32 address, u32 data); +void direct_byte_program(volatile u8 * spi_address, volatile u32 * address, u32 data); + +#endif

1 0

Patch set updated for coreboot: 41cd2ea S3 code in coreboot public folder.
by Zheng Bao 27 Mar '12

27 Mar '12

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/623 -gerrit commit 41cd2ea669c88a9446f1553bebe873305d020377 Author: zbao <fishbaozi(a)gmail.com> Date: Tue Mar 27 18:58:14 2012 +0800 S3 code in coreboot public folder. 1. Move the Stack to high memory. 2. Restore the MTRR before Coreboot jump to the wakeup vector. Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a Signed-off-by: Zheng Bao <zheng.bao(a)amd.com> Signed-off-by: zbao <fishbaozi(a)gmail.com> --- src/Kconfig | 4 + src/arch/x86/boot/tables.c | 2 +- src/cpu/amd/Makefile.inc | 12 + src/cpu/amd/agesa/Makefile.inc | 2 + src/cpu/amd/agesa/cache_as_ram.inc | 7 + src/cpu/amd/agesa/family14/Kconfig | 6 +- src/cpu/amd/agesa/family14/model_14_init.c | 125 +++++---- src/cpu/amd/agesa/s3_resume.c | 348 ++++++++++++++++++++++ src/cpu/amd/agesa/s3_resume.h | 42 +++ src/include/cbmem.h | 8 +- src/northbridge/amd/agesa/Kconfig | 4 + src/northbridge/amd/agesa/family14/northbridge.c | 77 ++++- 12 files changed, 560 insertions(+), 77 deletions(-) diff --git a/src/Kconfig b/src/Kconfig index 845d26f..4174b2d 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -207,6 +207,10 @@ config HAVE_INIT_TIMER default n if UDELAY_IO default y +config HIGH_SCRATCH_MEMORY_SIZE + hex + default 0x0 + config HAVE_MAINBOARD_RESOURCES bool default n diff --git a/src/arch/x86/boot/tables.c b/src/arch/x86/boot/tables.c index b7dc4fe..c90a01b 100644 --- a/src/arch/x86/boot/tables.c +++ b/src/arch/x86/boot/tables.c @@ -236,7 +236,7 @@ struct lb_memory *write_tables(void) * it begin there during reboot time. We don't need the pointer, nor * the result right now. If it fails, ACPI resume will be disabled. */ - cbmem_add(CBMEM_ID_RESUME, HIGH_MEMORY_SAVE); + cbmem_add(CBMEM_ID_RESUME, HIGH_MEMORY_SAVE + CONFIG_HIGH_SCRATCH_MEMORY_SIZE); #endif #if CONFIG_MULTIBOOT diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc index 6663d14..6d7b0e1 100644 --- a/src/cpu/amd/Makefile.inc +++ b/src/cpu/amd/Makefile.inc @@ -15,3 +15,15 @@ subdirs-$(CONFIG_CPU_AMD_SC520) += sc520 subdirs-$(CONFIG_CPU_AMD_SOCKET_S1G1) += socket_S1G1 subdirs-$(CONFIG_CPU_AMD_AGESA) += agesa + +$(obj)/s3.rom: + echo " S3 NVRAM 0xffff0000 (S3 storage area)" + echo -ne '\xFF' > $@ + for ((i=0;i<20479;i++)) do echo -ne '\xFF' >> $@ ; done + +ifeq ($(CONFIG_HAVE_ACPI_RESUME), y) +cbfs-files-y += s3nv +s3nv-file := $(obj)/s3.rom +s3nv-position := 0xffff0000 +s3nv-type := raw +endif diff --git a/src/cpu/amd/agesa/Makefile.inc b/src/cpu/amd/agesa/Makefile.inc index fb536dd..696173d 100644 --- a/src/cpu/amd/agesa/Makefile.inc +++ b/src/cpu/amd/agesa/Makefile.inc @@ -21,5 +21,7 @@ subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY12) += family12 subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY14) += family14 subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY15) += family15 +romstage-$(CONFIG_HAVE_ACPI_RESUME) += s3_resume.c +ramstage-$(CONFIG_HAVE_ACPI_RESUME) += s3_resume.c ramstage-y += apic_timer.c cpu_incs += $(src)/cpu/amd/agesa/cache_as_ram.inc diff --git a/src/cpu/amd/agesa/cache_as_ram.inc b/src/cpu/amd/agesa/cache_as_ram.inc index f328db4..2124bf3 100755 --- a/src/cpu/amd/agesa/cache_as_ram.inc +++ b/src/cpu/amd/agesa/cache_as_ram.inc @@ -86,6 +86,13 @@ disable_cache_as_ram: /* Save return stack */ movd %esp, %xmm0 + /* Disable cache */ + movl %cr0, %eax + orl $(1 << 30), %eax + movl %eax, %cr0 + + invd + AMD_DISABLE_STACK /* Restore the return stack */ diff --git a/src/cpu/amd/agesa/family14/Kconfig b/src/cpu/amd/agesa/family14/Kconfig index 702270c..6f20831 100644 --- a/src/cpu/amd/agesa/family14/Kconfig +++ b/src/cpu/amd/agesa/family14/Kconfig @@ -66,4 +66,8 @@ config HAVE_INIT_TIMER bool default y depends on CPU_AMD_AGESA_FAMILY14 - +config HIGH_SCRATCH_MEMORY_SIZE +# Now we can assume the statck as (0xA0000 - 0x30000 + 0x1000) which is max + hex + default 0x71000 + depends on CPU_AMD_AGESA_FAMILY14 diff --git a/src/cpu/amd/agesa/family14/model_14_init.c b/src/cpu/amd/agesa/family14/model_14_init.c index 6f697cf..4fd2b85 100644 --- a/src/cpu/amd/agesa/family14/model_14_init.c +++ b/src/cpu/amd/agesa/family14/model_14_init.c @@ -32,6 +32,8 @@ #include <cpu/x86/cache.h> #include <cpu/x86/mtrr.h> #include <cpu/amd/amdfam14.h> +#include <arch/acpi.h> +#include <cpu/amd/agesa/s3_resume.h> #define MCI_STATUS 0x401 @@ -57,69 +59,84 @@ void wrmsr_amd(u32 index, msr_t msr) static void model_14_init(device_t dev) { - printk(BIOS_DEBUG, "Model 14 Init.\n"); - - u8 i; - msr_t msr; - int msrno; + u32 i; + msr_t msr; #if CONFIG_LOGICAL_CPUS == 1 - u32 siblings; + u32 siblings; +#endif + printk(BIOS_DEBUG, "Model 14 Init.\n"); + + disable_cache (); + /* + * AGESA sets the MTRRs main MTRRs. The shadow area needs to be set + * by coreboot. The amd_setup_mtrrs should work, but needs debug on fam14. + * TODO: + * amd_setup_mtrrs(); + */ + + /* Enable access to AMD RdDram and WrDram extension bits */ + msr = rdmsr(SYSCFG_MSR); + msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; + msr.lo &= ~SYSCFG_MSR_MtrrFixDramEn; + wrmsr(SYSCFG_MSR, msr); + + /* Set shadow WB, RdMEM, WrMEM */ + msr.lo = msr.hi = 0; + wrmsr (0x259, msr); + msr.hi = msr.lo = 0x1e1e1e1e; + wrmsr(0x250, msr); + wrmsr(0x258, msr); + for (i = 0x268; i <= 0x26f; i++) + wrmsr(i, msr); + + msr = rdmsr(SYSCFG_MSR); + msr.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; + msr.lo |= SYSCFG_MSR_MtrrFixDramEn; + wrmsr(SYSCFG_MSR, msr); + +#if CONFIG_HAVE_ACPI_RESUME == 1 + if (acpi_slp_type == 3) + restore_mtrr(); #endif - disable_cache (); - /* Enable access to AMD RdDram and WrDram extension bits */ - msr = rdmsr(SYSCFG_MSR); - msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; - wrmsr(SYSCFG_MSR, msr); - - // BSP: make a0000-bffff UC, c0000-fffff WB, same as OntarioApMtrrSettingsList for APs - msr.lo = msr.hi = 0; - wrmsr (0x259, msr); - msr.lo = msr.hi = 0x1e1e1e1e; - for (msrno = 0x268; msrno <= 0x26f; msrno++) - wrmsr (msrno, msr); - - /* disable access to AMD RdDram and WrDram extension bits */ - msr = rdmsr(SYSCFG_MSR); - msr.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; - wrmsr(SYSCFG_MSR, msr); - enable_cache (); - - /* zero the machine check error status registers */ - msr.lo = 0; - msr.hi = 0; - for (i = 0; i < 6; i++) { - wrmsr(MCI_STATUS + (i * 4), msr); - } - - /* Enable the local cpu apics */ - setup_lapic(); + x86_mtrr_check(); + x86_enable_cache(); + + /* zero the machine check error status registers */ + msr.lo = 0; + msr.hi = 0; + for (i = 0; i < 6; i++) { + wrmsr(MCI_STATUS + (i * 4), msr); + } + + /* Enable the local cpu apics */ + setup_lapic(); #if CONFIG_LOGICAL_CPUS == 1 - siblings = cpuid_ecx(0x80000008) & 0xff; - - if (siblings > 0) { - msr = rdmsr_amd(CPU_ID_FEATURES_MSR); - msr.lo |= 1 << 28; - wrmsr_amd(CPU_ID_FEATURES_MSR, msr); - - msr = rdmsr_amd(CPU_ID_EXT_FEATURES_MSR); - msr.hi |= 1 << (33 - 32); - wrmsr_amd(CPU_ID_EXT_FEATURES_MSR, msr); - } - printk(BIOS_DEBUG, "siblings = %02d, ", siblings); + siblings = cpuid_ecx(0x80000008) & 0xff; + + if (siblings > 0) { + msr = rdmsr_amd(CPU_ID_FEATURES_MSR); + msr.lo |= 1 << 28; + wrmsr_amd(CPU_ID_FEATURES_MSR, msr); + + msr = rdmsr_amd(CPU_ID_EXT_FEATURES_MSR); + msr.hi |= 1 << (33 - 32); + wrmsr_amd(CPU_ID_EXT_FEATURES_MSR, msr); + } #endif - /* DisableCf8ExtCfg */ - msr = rdmsr(NB_CFG_MSR); - msr.hi &= ~(1 << (46 - 32)); - wrmsr(NB_CFG_MSR, msr); + /* DisableCf8ExtCfg */ + msr = rdmsr(NB_CFG_MSR); + msr.hi &= ~(1 << (46 - 32)); + wrmsr(NB_CFG_MSR, msr); + /* Write protect SMM space with SMMLOCK. */ + msr = rdmsr(HWCR_MSR); + msr.lo |= (1 << 0); + wrmsr(HWCR_MSR, msr); - /* Write protect SMM space with SMMLOCK. */ - msr = rdmsr(HWCR_MSR); - msr.lo |= (1 << 0); - wrmsr(HWCR_MSR, msr); + printk(BIOS_SPEW, "%s done.\n", __func__); } static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/amd/agesa/s3_resume.c b/src/cpu/amd/agesa/s3_resume.c new file mode 100644 index 0000000..871d8a7 --- /dev/null +++ b/src/cpu/amd/agesa/s3_resume.c @@ -0,0 +1,348 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <console/console.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/x86/cache.h> +#if CONFIG_WRITE_HIGH_TABLES +#include <cbmem.h> +#endif +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <arch/acpi.h> +#include <string.h> +#include "Porting.h" +#include "BiosCallOuts.h" +#include "s3_resume.h" +#include "agesawrapper.h" + +#ifndef __PRE_RAM__ +#include "spi.h" +#endif + +void restore_mtrr(void) +{ + u32 msr; + volatile UINT32 *msrPtr = (volatile UINT32 *)S3_DATA_MTRR_POS; + msr_t msr_data; + + printk(BIOS_SPEW, "%s\n", __func__); + + disable_cache(); + + /* Enable access to AMD RdDram and WrDram extension bits */ + msr_data = rdmsr(SYS_CFG); + msr_data.lo |= SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYS_CFG, msr_data); + + /* Now restore the Fixed MTRRs */ + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(0x250, msr_data); + + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(0x258, msr_data); + + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(0x259, msr_data); + + for (msr = 0x268; msr <= 0x26F; msr++) { + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(msr, msr_data); + } + + /* Disable access to AMD RdDram and WrDram extension bits */ + msr_data = rdmsr(SYS_CFG); + msr_data.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYS_CFG, msr_data); + + /* Restore the Variable MTRRs */ + for (msr = 0x200; msr <= 0x20F; msr++) { + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(msr, msr_data); + } + + /* Restore SYSCFG MTRR */ + msr_data.lo = *msrPtr; + msrPtr ++; + msr_data.hi = *msrPtr; + msrPtr ++; + wrmsr(SYS_CFG, msr_data); +} + +inline void *backup_resume(void) +{ + unsigned long high_ram_base; + void *resume_backup_memory; + + /* Start address of high memory tables */ + high_ram_base = (u32) get_cbmem_toc(); + + /* + * printk(BIOS_DEBUG, "CBMEM TOC is at: %x\n", (u32_t)high_ram_base); + * printk(BIOS_DEBUG, "CBMEM TOC 0-size:%x\n ",(u32_t)(high_ram_base + HIGH_MEMORY_SIZE + 4096)); + */ + + cbmem_reinit((u64) high_ram_base); + + resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + if (((u32) resume_backup_memory == 0) + || ((u32) resume_backup_memory == -1)) { + printk(BIOS_ERR, "Error: resume_backup_memory: %x\n", + (u32) resume_backup_memory); + for (;;) ; + } + + return resume_backup_memory; +} + +void move_stack_high_mem(void *resume_backup_memory) +{ +#if 0 + u32 *sp, index; + __asm__ volatile ("mov %%esp, %0":"=r" (sp) + ::); + printk(BIOS_DEBUG, "%x:", (u32) sp); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[0], sp[1], sp[2], sp[3]); + printk(BIOS_DEBUG, "%x:", (u32) (sp + 4)); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[4], sp[5], sp[6], sp[7]); + printk(BIOS_DEBUG, "%x:", (u32) (sp + 8)); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[8], sp[9], sp[10], sp[11]); +#endif + + memcpy(resume_backup_memory, (void *)BSP_STACK_BASE_ADDR, + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE)); + + __asm__ + volatile ("add %0, %%esp; add %0, %%ebp; invd"::"g" + (resume_backup_memory - BSP_STACK_BASE_ADDR) + :); + +#if 0 + __asm__ volatile ("mov %%esp, %0":"=r" (sp) + ::); + printk(BIOS_DEBUG, "%x:", (u32) sp); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[0], sp[1], sp[2], sp[3]); + printk(BIOS_DEBUG, "%x:", (u32) (sp + 4)); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[4], sp[5], sp[6],sp[7]); + printk(BIOS_DEBUG, "%x:", (u32) (sp + 8)); + printk(BIOS_DEBUG, "[%08x,%08x,%08x,%08x]\n", sp[8], sp[9], sp[10], sp[11]); +#endif +} + +void OemAgesaSaveMtrr(void) +{ +#ifndef __PRE_RAM__ + u32 spi_address; + msr_t msr_data; + device_t dev; + u32 nvram_pos = S3_DATA_MTRR_POS; + u32 i; + + dev = dev_find_slot(0, PCI_DEVFN(0x14, 3)); + spi_address = pci_read_config32(dev, 0xA0) & ~0x1F; + + /* Enable access to AMD RdDram and WrDram extension bits */ + msr_data = rdmsr(SYS_CFG); + msr_data.lo |= SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYS_CFG, msr_data); + + /* Fixed MTRRs */ + msr_data = rdmsr(0x250); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + + msr_data = rdmsr(0x258); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + + msr_data = rdmsr(0x259); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + + for (i = 0x268; i < 0x270; i++) { + msr_data = rdmsr(i); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + } + + /* Disable access to AMD RdDram and WrDram extension bits */ + msr_data = rdmsr(SYS_CFG); + msr_data.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYS_CFG, msr_data); + + /* Variable MTRRs */ + for (i = 0x200; i < 0x210; i++) { + msr_data = rdmsr(i); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + } + + /* SYS_CFG */ + msr_data = rdmsr(0xC0010010); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + + /* TOM */ + msr_data = rdmsr(0xC001001A); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + + /* TOM2 */ + msr_data = rdmsr(0xC001001D); + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.lo); + nvram_pos += 4; + dword_noneAAI_program((u8 *) spi_address, nvram_pos, msr_data.hi); + nvram_pos += 4; + +#endif +} + +void OemAgesaGetS3Info(S3_DATA_TYPE S3DataType, u32 *DataSize, void **Data) +{ + AMD_CONFIG_PARAMS StdHeader; + if (S3DataType == S3DataTypeNonVolatile) { + *Data = (void *)S3_DATA_NONVOLATILE_POS; + *DataSize = *(UINTN *) (*Data); + *Data += 4; + } else { + *DataSize = *(UINTN *) S3_DATA_VOLATILE_POS; + *Data = (void *) GetHeapBase(&StdHeader); + memcpy((void *)(*Data), (void *)(S3_DATA_VOLATILE_POS + 4), *DataSize); + } +} + +u32 OemAgesaSaveS3Info(S3_DATA_TYPE S3DataType, u32 DataSize, void *Data) +{ + + u32 pos = S3_DATA_VOLATILE_POS; +#ifndef __PRE_RAM__ + u32 spi_address, data; + u32 nvram_pos; + device_t dev; +#endif + + if (S3DataType == S3DataTypeNonVolatile) { + pos = S3_DATA_NONVOLATILE_POS; + } else { /* S3DataTypeVolatile */ + pos = S3_DATA_VOLATILE_POS; + } + +#ifndef __PRE_RAM__ + dev = dev_find_slot(0, PCI_DEVFN(0x14, 3)); + spi_address = pci_read_config32(dev, 0xA0) & ~0x1F; + + /* printk(BIOS_DEBUG, "spi_address=%x\n", spi_address); */ + read_spi_id((u8 *) spi_address); + write_spi_status((u8 *)spi_address, 0); + if (S3DataType == S3DataTypeNonVolatile) { + sector_erase_spi((u8 *) spi_address, S3_DATA_NONVOLATILE_POS); + } else { + sector_erase_spi((u8 *) spi_address, S3_DATA_VOLATILE_POS); + sector_erase_spi((u8 *) spi_address, + S3_DATA_VOLATILE_POS + 0x1000); + sector_erase_spi((u8 *) spi_address, + S3_DATA_VOLATILE_POS + 0x2000); + sector_erase_spi((u8 *) spi_address, + S3_DATA_VOLATILE_POS + 0x3000); + } + + nvram_pos = 0; + dword_noneAAI_program((u8 *) spi_address, nvram_pos + pos, DataSize); + + for (nvram_pos = 0; nvram_pos < DataSize; nvram_pos += 4) { + data = *(u32 *) (Data + nvram_pos); + dword_noneAAI_program((u8 *) spi_address, nvram_pos + pos + 4, + *(u32 *) (Data + nvram_pos)); + } +#endif + + return AGESA_SUCCESS; +} + +void set_resume_cache(void) +{ + msr_t msr; + + /* disable fixed mtrr for now, it will be enabled by mtrr restore */ + msr = rdmsr(SYSCFG_MSR); + msr.lo &= ~(SYSCFG_MSR_MtrrFixDramEn | SYSCFG_MSR_MtrrFixDramModEn); + wrmsr(SYSCFG_MSR, msr); + + /* Enable caching for 0 - coreboot ram using variable mtrr */ + msr.lo = 0 | MTRR_TYPE_WRBACK; + msr.hi = 0; + wrmsr(MTRRphysBase_MSR(0), msr); + msr.lo = ~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid; + msr.hi = (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1; + wrmsr(MTRRphysMask_MSR(0), msr); + + /* Set the default memory type and disable fixed and enable variable MTRRs */ + msr.hi = 0; + msr.lo = (1 << 11); + wrmsr(MTRRdefType_MSR, msr); + + enable_cache(); +} + +void s3_resume(void) +{ + int status; + + printk(BIOS_DEBUG, "agesawrapper_amds3laterestore "); + status = agesawrapper_amds3laterestore(); + if (status) + printk(BIOS_DEBUG, "error level: %x \n", (u32) status); + else + printk(BIOS_DEBUG, "passed.\n"); +} diff --git a/src/cpu/amd/agesa/s3_resume.h b/src/cpu/amd/agesa/s3_resume.h new file mode 100644 index 0000000..a62f90e --- /dev/null +++ b/src/cpu/amd/agesa/s3_resume.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef S3_RESUME_H +#define S3_RESUME_H + +#define S3_DATA_NONVOLATILE_POS 0xFFFF4000 +#define S3_DATA_VOLATILE_POS 0xFFFF0000 +#define S3_DATA_MTRR_POS 0xFFFF3100 + +typedef enum { + S3DataTypeNonVolatile=0, ///< NonVolatile Data Type + S3DataTypeVolatile ///< Volatile Data Type +} S3_DATA_TYPE; + +void restore_mtrr(void); +void s3_resume(void); +inline void *backup_resume(void); +void set_resume_cache(void); +void move_stack_high_mem(void *resume_backup_memory); + +u32 OemAgesaSaveS3Info (S3_DATA_TYPE S3DataType, u32 DataSize, void *Data); +void OemAgesaGetS3Info (S3_DATA_TYPE S3DataType, u32 *DataSize, void **Data); +void OemAgesaSaveMtrr (void); + +#endif diff --git a/src/include/cbmem.h b/src/include/cbmem.h index 9806854..4cb4ea3 100644 --- a/src/include/cbmem.h +++ b/src/include/cbmem.h @@ -25,11 +25,11 @@ extern uint64_t high_tables_base, high_tables_size; #if CONFIG_HAVE_ACPI_RESUME -#define HIGH_MEMORY_SIZE ((CONFIG_RAMTOP - CONFIG_RAMBASE) + HIGH_MEMORY_DEF_SIZE) -#define HIGH_MEMORY_SAVE ( HIGH_MEMORY_SIZE - HIGH_MEMORY_DEF_SIZE ) -#else +#define HIGH_MEMORY_SAVE (CONFIG_RAMTOP - CONFIG_RAMBASE) +#define HIGH_MEMORY_SIZE (HIGH_MEMORY_SAVE + CONFIG_HIGH_SCRATCH_MEMORY_SIZE + HIGH_MEMORY_DEF_SIZE) +#else /* CONFIG_HAVE_ACPI_RESUME */ #define HIGH_MEMORY_SIZE HIGH_MEMORY_DEF_SIZE -#endif +#endif /* CONFIG_HAVE_ACPI_RESUME */ #define CBMEM_ID_FREESPACE 0x46524545 #define CBMEM_ID_GDT 0x4c474454 diff --git a/src/northbridge/amd/agesa/Kconfig b/src/northbridge/amd/agesa/Kconfig index 2ee921b..ebdda38 100644 --- a/src/northbridge/amd/agesa/Kconfig +++ b/src/northbridge/amd/agesa/Kconfig @@ -27,6 +27,10 @@ config CONSOLE_VGA_MULTI bool default n +config S3_VGA_ROM_RUN + bool + default n + source src/northbridge/amd/agesa/family10/Kconfig source src/northbridge/amd/agesa/family12/Kconfig source src/northbridge/amd/agesa/family14/Kconfig diff --git a/src/northbridge/amd/agesa/family14/northbridge.c b/src/northbridge/amd/agesa/family14/northbridge.c index 15efe12..2647814 100644 --- a/src/northbridge/amd/agesa/family14/northbridge.c +++ b/src/northbridge/amd/agesa/family14/northbridge.c @@ -745,20 +745,46 @@ static void domain_set_resources(device_t dev) printk(BIOS_DEBUG, " adsr - leaving this lovely routine.\n"); } -static void domain_enable_resources(device_t dev) { +extern u8 acpi_slp_type; + +static void domain_enable_resources(device_t dev) +{ u32 val; #if CONFIG_AMD_SB_CIMX + #if CONFIG_HAVE_ACPI_RESUME + if (acpi_slp_type != 3) { + sb_After_Pci_Init(); + sb_Mid_Post_Init(); + } else { + sb_After_Pci_Restore_Init(); + } + #else sb_After_Pci_Init(); sb_Mid_Post_Init(); + #endif #endif /* Must be called after PCI enumeration and resource allocation */ printk(BIOS_DEBUG, "\nFam14h - domain_enable_resources: AmdInitMid.\n"); - val = agesawrapper_amdinitmid(); - if (val) { - printk(BIOS_DEBUG, "agesawrapper_amdinitmid failed: %x \n", val); + +#if CONFIG_HAVE_ACPI_RESUME + if (acpi_slp_type != 3) { + printk(BIOS_DEBUG, "agesawrapper_amdinitmid "); + val = agesawrapper_amdinitmid (); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); } +#else + printk(BIOS_DEBUG, "agesawrapper_amdinitmid "); + val = agesawrapper_amdinitmid (); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); +#endif printk(BIOS_DEBUG, " ader - leaving domain_enable_resources.\n"); } @@ -788,24 +814,41 @@ static void cpu_bus_set_resources(device_t dev) { pci_dev_set_resources(dev); } -static void cpu_bus_init(device_t dev) { - struct device_path cpu_path; +static u32 cpu_bus_scan(device_t dev, u32 max) +{ device_t cpu; - int apic_id; + struct device_path cpu_path; + int apic_id, cores_found; - initialize_cpus(dev->link_list); + /* There is only one node for fam14, but there may be multiple cores. */ + cpu = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + if (!cpu) + printk(BIOS_ERR, "ERROR: %02x:%02x.0 not found", 0, 0x18); - /* Build the AP cpu device path(s) */ - for (apic_id = 1; apic_id < CONFIG_MAX_CPUS; apic_id++) { + cores_found = (pci_read_config32(dev_find_slot(0,PCI_DEVFN(0x18,0x3)), 0xe8) >> 12) & 3; + printk(BIOS_DEBUG, " AP siblings=%d\n", cores_found); + + + for (apic_id = 0; apic_id <= cores_found; apic_id++) { cpu_path.type = DEVICE_PATH_APIC; cpu_path.apic.apic_id = apic_id; - cpu = alloc_dev(dev->link_list, &cpu_path); - if (!cpu) - return; - cpu->enabled = 1; - cpu->path.apic.node_id = 0; - cpu->path.apic.core_id = apic_id; + cpu = alloc_find_dev(dev->link_list, &cpu_path); + if (cpu) { + cpu->enabled = 1; + cpu->path.apic.node_id = 0; + cpu->path.apic.core_id = apic_id; + printk(BIOS_DEBUG, "CPU: %s %s\n", + dev_path(cpu), cpu->enabled?"enabled":"disabled"); + } else { + cpu->enabled = 0; + } } + return max; +} + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(dev->link_list); } /* North Bridge Structures */ @@ -844,7 +887,7 @@ static struct device_operations cpu_bus_ops = { .set_resources = cpu_bus_set_resources, .enable_resources = NULL, .init = cpu_bus_init, - .scan_bus = NULL, + .scan_bus = cpu_bus_scan, }; static void root_complex_enable_dev(struct device *dev) {

1 0

← Newer
1
...
13
14
15
16
17
18
19
...
72
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2012