coreboot February 2011

coreboot@coreboot.org

52 participants
283 discussions

build service results for r6335
by repository service 07 Feb '11

07 Feb '11

Dear coreboot readers! This is the automatic build system of coreboot. The developer "stuge" checked in revision 6335 to the coreboot repository. This caused the following changes: Change Log: Reliably build arbitrary Kconfig-based revisions of SeaBIOS Reliability is accomplished by checking out the desired SeaBIOS commitish into a branch named 'coreboot' in the local SeaBIOS git repository. Using a branch allows TAG-$(CONFIG_SEABIOS_..) to refer to any commitish in the SeaBIOS git repo, not just branches and tags. Configuration is done with make defconfig followed by enabling and disabling of the relevant coreboot-specific SeaBIOS options by appending to .config using echo. This works, because later entries in .config will overwrite earlier ones. Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Build Log: Compilation of a-trend:atc-6220 has been fixed If something broke during this checkin please be a pain in stuge's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Reliably build any Kconfig-based SeaBIOS revision
by Peter Stuge 07 Feb '11

07 Feb '11

See patch. The new TAG-stable points to the very latest commit in seabios.git, which may not be quite right, but both stable and master must be using Kconfig. //Peter

2 3

[commit] r6335 - in trunk: payloads/external/SeaBIOS src/arch/x86
by repository service 07 Feb '11

07 Feb '11

Author: stuge Date: Mon Feb 7 21:16:40 2011 New Revision: 6335 URL: https://tracker.coreboot.org/trac/coreboot/changeset/6335 Log: Reliably build arbitrary Kconfig-based revisions of SeaBIOS Reliability is accomplished by checking out the desired SeaBIOS commitish into a branch named 'coreboot' in the local SeaBIOS git repository. Using a branch allows TAG-$(CONFIG_SEABIOS_..) to refer to any commitish in the SeaBIOS git repo, not just branches and tags. Configuration is done with make defconfig followed by enabling and disabling of the relevant coreboot-specific SeaBIOS options by appending to .config using echo. This works, because later entries in .config will overwrite earlier ones. Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Modified: trunk/payloads/external/SeaBIOS/Makefile.inc trunk/src/arch/x86/Makefile.inc Modified: trunk/payloads/external/SeaBIOS/Makefile.inc ============================================================================== --- trunk/payloads/external/SeaBIOS/Makefile.inc Sat Feb 5 14:32:56 2011 (r6334) +++ trunk/payloads/external/SeaBIOS/Makefile.inc Mon Feb 7 21:16:40 2011 (r6335) @@ -1,31 +1,38 @@ TAG-$(CONFIG_SEABIOS_MASTER)=origin/master -TAG-$(CONFIG_SEABIOS_STABLE)=rel-0.6.1.3 +TAG-$(CONFIG_SEABIOS_STABLE)=1efb10b9ea30c45a8c9c6230234fefa10d2886ed -all: seabios - -seabios: patch - cd seabios; $(MAKE) +unexport KCONFIG_AUTOCONFIG -patch: checkout - test -r seabios/.patched || \ - perl -pi -e "s,#define CONFIG_COREBOOT 0,#define CONFIG_COREBOOT 1,;" \ - -e "s,#define CONFIG_DEBUG_SERIAL 0,#define CONFIG_DEBUG_SERIAL 1,;" \ - -e "s,#define CONFIG_VGAHOOKS 0,#define CONFIG_VGAHOOKS 1,;" \ - seabios/src/config.h - touch seabios/.patched +all: seabios checkout: - echo "Checking out SeaBIOS $(TAG-y)" + echo " GIT SeaBIOS $(TAG-y)" test -d seabios && ( cd seabios; git fetch ) || \ - git clone git://git.linuxtogo.org/home/kevin/seabios.git seabios - cd seabios; git checkout -m $(TAG-y) + git clone git://git.linuxtogo.org/home/kevin/seabios.git + cd seabios; git checkout master; git branch -D coreboot 2>/dev/null; git checkout -b coreboot $(TAG-y) + +config: checkout + echo " CONFIG SeaBIOS $(TAG-y)" + $(MAKE) -C seabios defconfig + echo "CONFIG_COREBOOT=y" >> seabios/.config + echo "CONFIG_DEBUG_SERIAL=y" >> seabios/.config + echo "CONFIG_COREBOOT_FLASH=y" >> seabios/.config + echo "CONFIG_LZMA=y" >> seabios/.config + echo "CONFIG_FLASH_FLOPPY=y" >> seabios/.config + echo "CONFIG_VGAHOOKS=y" >> seabios/.config + # This shows how to force a previously set .config option *off* + #echo "# CONFIG_SMBIOS is not set" >> seabios/.config + +seabios: config + echo " MAKE SeaBIOS $(TAG-y)" + $(MAKE) -C seabios clean: - test -d seabios && (cd seabios; $(MAKE) clean) || exit 0 + test -d seabios && $(MAKE) -C seabios clean || exit 0 distclean: rm -rf seabios -.PHONY: seabios +.PHONY: checkout config seabios clean distclean Modified: trunk/src/arch/x86/Makefile.inc ============================================================================== --- trunk/src/arch/x86/Makefile.inc Sat Feb 5 14:32:56 2011 (r6334) +++ trunk/src/arch/x86/Makefile.inc Mon Feb 7 21:16:40 2011 (r6335) @@ -278,6 +278,7 @@ seabios: $(MAKE) -C payloads/external/SeaBIOS -f Makefile.inc \ + HOSTCC="$(HOSTCC)" \ CC="$(CC)" LD="$(LD)" OBJDUMP="$(OBJDUMP)" \ OBJCOPY="$(OBJCOPY)" STRIP="$(STRIP)" \ CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \

1 0

Trac reminder: list of new ticket(s)
by coreboot tracker 07 Feb '11

07 Feb '11

1 0

gcc in coreboot
by ali hagigat 07 Feb '11

07 Feb '11

If I want to run gcc, ld , as from elf32-i386 toolchain, should i change the file .xcompile in the root directory of Coreboot? and change the following line: CC:=gcc -Wa,--divide -fno-stack-protector -Wl,--build-id=none to: CC:=util/crossgcc/xgcc/i386-elf/bin/gcc -Wa,--divide -fno-stack-protector -Wl,--build-id=none Will that be enough? (no need to change the system header files paths? or other thing?) Sorry to take up the time of people of the mailing list and thank you all in advance.

2 1

Support for siemens sitemp_g1p1 mainboard
by Josef Kellermann 06 Feb '11

06 Feb '11

Added support for the Siemens 'sitemp_g1p1' mainboard. The board is similar to the AMD dbm690t. I adapt the code from dbm690t according to customer requirement specification. I have been testing Linux as well as Windows XP booting on this board. Signed-off-by: Josef Kellermann <seppk(a)arcor.de> <mailto://seppk@arcor.de>

1 0

how Coreboot keeps the right offsets of the sections
by ali hagigat 06 Feb '11

06 Feb '11

Coreboot starts by compiling and linking some C-Assembly files as bootblock core and then compile and link them by some linker script files. the result is bootblock.elf but then it executes: objcopy -O binary bootblock.elf coreboot.bootblock The elf file probably has some headers which specify the VMA-LMA addresses of the sections but after objcopy command all these headers are removed. So how cbfstool can write those sections in a correct relative position? While all the information of the addresses have been deleted by objcopy?(how .reset section is written from 0xfffffff0) My another question is that the top content of ROM, like 0xffffff00 is probably written from the beginning of coreboot.rom so does flash utility writes coreboot.rom from 0xffffffff or the end of BIOS EEPROM?

1 0

errata#89 patch for Family 0Fh Prozessors
by Josef Kellermann 05 Feb '11

05 Feb '11

This patch fixes a potential system hang. Don't know why this patch isn't included if 'CONFIG_K8_REV_F_SUPPORT == 1'. Signed-off-by: Josef Kellermann <mailto://seppk@arcor.de><seppk(a)arcor.de> <mailto://seppk@arcor.de>

3 10

#174: Unable to boot from qemu-kvm -- seems to be a cbfs problem
by coreboot 05 Feb '11

05 Feb '11

#174: Unable to boot from qemu-kvm -- seems to be a cbfs problem -------------------------------------+------------------------------------- Reporter: czw[+]660[+]@… | Owner: stepan@… Type: defect | Status: new Priority: major | Milestone: Component: coreboot | Keywords: Dependencies: | Patch Status: there is no patch -------------------------------------+------------------------------------- Hello, I was the opener of ticket 173, so I'm still using gcc 4.4.3, and now testing with qemu-kvm version 0.12.5, with (about) the following command: [[BR]] {{{ /usr/local/bin/qemu-system-x86_64 -monitor stdio -smp 1,cores=1,threads=1,sockets=1 -cpu phenom -soundhw ac97 -k it -kvm-shadow- memory 1 -m 512 -no-fd-bootchk -show-cursor -drive file="/mnt/pdc_a0p1/qemu/disk0",if=scsi,bus=0,unit=0,media=disk -drive file="/mnt/pdc_a0p1/qemu/disk1",if=scsi,bus=1,unit=0,media=disk -drive file="/mnt/pdc_a0p1/qemu/disk2",if=scsi,bus=2,unit=0,media=disk -net none -usb -usbdevice tablet -startdate 2009-01-20T14:30:00 -name "test" -cdrom path/to/image.iso -fda /mnt/pdc_a0p1/qemu/fd -hda /mnt/pdc_a0p1/qemu/ide -L /mnt/pdc_a0p1/qemu/bios -bios coreboot_version-seabios_version.bin -boot order=adc,menu=on -vga cirrus -serial file:path/to/coreboot_version- seabios_version.log }}} (configured from aqemu) [[BR]] path/to/image.iso is a bootable dvd image with freedos or /dev/cdrom (I get similar results with a win xp setup disk/image) - this is also the only bootable emulated drive; path/to/coreboot_version-seabios_version.log is a log of the serial output of coreboot (see attached files). The above works fine with both qemu's bios.bin and pre-built coreboot v2 r4917 + seabios 9eebe66a9978165cfa91f2266c97fa5d0aa6ef2e, 2009-11-04, as retrieved from [http://www.coreboot.org/images/6/6a/Qemu_coreboot_seabios.zip] which works with both qemu's provided vgabios-cirrus.bin and your patched version - from [http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip] - excluding a seabios or qemu-kvm specific problem. I can also exclude any problem related to my build environment (as well as my qemu-kvm) because I've been able to download, build and boot coreboot r4917 + the above seabios version with a correctly modified src/config.h, as per [[BR]] {{{ #define CONFIG_COREBOOT 1 #define CONFIG_DEBUG_SERIAL 1 #define CONFIG_COREBOOT_FLASH 1 #define CONFIG_OPTIONROMS_DEPLOYED 0 #define CONFIG_VGAHOOKS 1 }}} [[BR]] Now to the core of the problem: when runnig qemu-kvm it hangs after displaying a vga specific message (see attached jpeg), and serial log files show a message like the following: [[BR]] {{{ CBFS: Could not find file fallback/payload Boot failed. }}} (last message - see attached file for full log) [[BR]] Of course, fallback/payload is therein (see attached coreboot-layout.txt for a cbfstool print result) I'm testing both the stable trunk (pre-6321 but correcting the issue from ticket 173) and revision 6325 of coreboot, both with latest stable seabios (0.6.1.3) and the old one used in your qemu test (v2) build, added as external elf payload, with or without lzma compression, all the rest with default configuration values (see attached files for full details). Regards -- Ticket URL: <https://tracker.coreboot.org/trac/coreboot/ticket/174> coreboot <http://www.coreboot.org/>

1 4

build service results for r6334
by repository service 05 Feb '11

05 Feb '11

Dear coreboot readers! This is the automatic build system of coreboot. The developer "stuge" checked in revision 6334 to the coreboot repository. This caused the following changes: Change Log: Actually add PC87382 into Kconfig, missing from r6332 Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Peter Stuge <peter(a)stuge.se> Build Log: Compilation of a-trend:atc-6220 has been broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=6334&device=atc-6220&vendo… If something broke during this checkin please be a pain in stuge's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

← Newer
1
...
22
23
24
25
26
27
28
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2011