coreboot January 2009

coreboot@coreboot.org

66 participants
320 discussions

r3894 - trunk/util/flashrom
by svn＠coreboot.org 25 Jan '09

25 Jan '09

Author: stuge Date: 2009-01-25 21:41:51 +0100 (Sun, 25 Jan 2009) New Revision: 3894 Modified: trunk/util/flashrom/flashrom.c Log: flashrom: Fix stupid off-by-one error in erase verification. As reported by Jody McIntyre. Thanks! Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/util/flashrom/flashrom.c =================================================================== --- trunk/util/flashrom/flashrom.c 2009-01-24 23:01:08 UTC (rev 3893) +++ trunk/util/flashrom/flashrom.c 2009-01-25 20:41:51 UTC (rev 3894) @@ -605,7 +605,7 @@ memcpy(buf, (const char *)flash->virtual_memory, size); else flash->read(flash, buf); - for (erasedbytes = 0; erasedbytes <= size; erasedbytes++) + for (erasedbytes = 0; erasedbytes < size; erasedbytes++) if (0xff != buf[erasedbytes]) { printf("FAILED!\n"); fprintf(stderr, "ERROR at 0x%08x: Expected=0xff, Read=0x%02x\n",

1 0

Re: [coreboot] [PATCH] Remove reset in SB600 SATA speed fall down
by Dan Lykowski 25 Jan '09

25 Jan '09

I thought I had read that it was needed somewhere. I haven't been able to find it again. I based the removal on section 6.5 in the SB600 rpr. I interpreted the end of the section to say the reset could cause problems and was unneeded. It seems to work fine without it. Either way is fine for me, I was just trying to keeps things minimal. Thanks, Dan Lykowski --- On Sat, 1/24/09, Peter Stuge <peter(a)stuge.se> wrote: From: Peter Stuge <peter(a)stuge.se> Subject: Re: [coreboot] [PATCH] Remove reset in SB600 SATA speed fall down To: coreboot(a)coreboot.org Date: Saturday, January 24, 2009, 7:00 PM -----Inline Attachment Follows----- Dan Lykowski wrote: > I discovered I didn't need to do the reset when falling down to > 1.5g. Docs seemed to say the reset is needed though? Can you comment? //Peter -- coreboot mailing list: coreboot(a)coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot

1 0

A little patch to fix rs690 bug:
by Li, Maggie 25 Jan '09

25 Jan '09

Hi, Attachment is a little patch to fix rs690 bug about GPPSB configuration. Signed-off-by: Maggie Li <maggie.li(a)amd.com> Reviewed-by: Zheng Bao <Zheng.bao(a)amd.com <mailto:michael.xie@amd.com> > Please check it, thanks. <<fix_rs690_bug.patch>> Best regards Maggie li

3 2

Re: [coreboot] #15: fix abuild for all boards that use the "three images solution
by coreboot 25 Jan '09

25 Jan '09

#15: fix abuild for all boards that use the "three images solution --------------------------+------------------------------------------------- Reporter: anonymous | Owner: yhlu Type: defect | Status: reopened Priority: major | Milestone: Component: coreboot | Version: v2 Resolution: | Keywords: abuild Dependencies: | Patchstatus: there is no patch --------------------------+------------------------------------------------- Comment(by empormacychor): Reseller web hosting ( ): allows clients to become web hosts themselves. <a href="http://remnd.we.bs/index.html ">http://remnd.we.bs</a> -- Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/15#comment:5> coreboot <http://www.coreboot.org/>

1 0

What's the difference between bios.bin.elf-20081108-viavga and bios.bin.elf-20081108
by Yunchuan Qin 25 Jan '09

25 Jan '09

I noticed that there is two version for seabios on 20081108. The bios.bin.elf-20081108-viavga works fine for me but the source code I download from git tree cannot. The log says: Scan for option roms Found option rom with bad checksum: loc=000c0000 len=64000 sum=000000ff

2 1

Re: [coreboot] dbm690t PIRQ table
by Dan Lykowski 25 Jan '09

25 Jan '09

I guess I could agree with that, but is there some sort of warning we can put somewhere. A Wiki would be nice. I spent WAY too many hours trying to figure this out. :) I just wanted a very simple no thrills, boots in less that 2 seconds kernel. As I learn more about this stuff, I am really starting to see the insanity that the modern PC BIOS has become.. DMI, PCI 3.0, PIRQ, MPTABLE, ACPI, etc.. Most of it not needed but being supported for legacy reasons. Here is my boot log - coreboot -> kernel with FILO being quiet. X Hangs when I try to start it. I don't have logs yet. But I think it might have something to do with the PCI memory regions being different/disabled along with the prefetch windows all being disabled. I don't know just yet, but that is what I'll be looking at first on Monday. Any hints as to where the regions are supposed to be setup? Another note, the SB600 is not detecting a codec. So, I plan on looking at that also. Thanks, Dan Lykowski coreboot-2.0.0 Fri Jan 23 17:34:48 PST 2009 starting... bsp_apicid=0x0 Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x60fc2. CPU Rev is K8_G0. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() Changing FIDVID not supported entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8035 pos=0x8a, filtered freq_cap=0x35 pos=0xd2, unfiltered freq_cap=0x65 pos=0xd2, filtered freq_cap=0x65 freq_cap1=0x35, freq_cap2=0x65 dev1 old_freq=0x0, freq=0x5, needs_reset=0x1 dev2 old_freq=0x0, freq=0x5, needs_reset=0x1 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x1 after optimize_link_read_pointers_chain, reset_needed=0x1 rs690_htinit k8_ht_freq=5. rs690_htinit NB_CFG_Q_F1000_800=0 needs_reset=0x1 ht reset - coreboot-2.0.0 Fri Jan 23 17:34:48 PST 2009 starting... bsp_apicid=0x0 Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x60fc2. CPU Rev is K8_G0. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() Changing FIDVID not supported entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8035 pos=0x8a, filtered freq_cap=0x35 pos=0xd2, unfiltered freq_cap=0x65 pos=0xd2, filtered freq_cap=0x65 freq_cap1=0x35, freq_cap2=0x65 dev1 old_freq=0x5, freq=0x5, needs_reset=0x0 dev2 old_freq=0x5, freq=0x5, needs_reset=0x0 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x0 after optimize_link_read_pointers_chain, reset_needed=0x0 rs690_htinit k8_ht_freq=5. rs690_htinit NB_CFG_Q_F1000_800=0 needs_reset=0x0 sysinfo->nodes: 1 sysinfo->ctrl: cf188 spd_addr: ffff93d0 Ram1.00 setting up CPU 00 northbridge registers done. Ram2.00 sdram_set_spd_registers: paramx :000ce854 Enable 64MuxMode & BurstLength32 Unbuffered 400MHz 400MHz Interleaved RAM: 0x00100000 kB Ram3 sdram_enable: tsc0[8]: 000cee04Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 1024MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=06 done DQS Training:DQSPos: 00 TrainDQSRdWrPos: buf_a:000ce940 TrainDQSPos: MutualCSPassW[48] :000ce7b4 TrainDQSPos: MutualCSPassW[48] :000ce7b4 TrainDQSPos: MutualCSPassW[48] :000ce7b4 TrainDQSPos: MutualCSPassW[48] :000ce7b4 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=5a done DQS Training:tsc[00]=000000001c101282 DQS Training:tsc[01]=000000001ce9aac0 DQS Training:tsc[02]=000000001cebbc86 DQS Training:tsc[03]=00000000271858d0 DQS Training:tsc[04]=0000000027f31964 Ram4 v_esp=000ceed8 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Uncompressing coreboot to RAM. src=fffe0000 dst=00004000 coreboot_ram.nrv2b length = 0000f678 coreboot_ram.bin length = 0002b024 Jumping to coreboot. coreboot-2.0.0 Fri Jan 23 17:34:48 PST 2009 booting... Enumerating buses... Mainboard DBM690T Enable. dev=0x21a5c dbm690t_enable, TOP MEM: msr.lo = 0x40000000, msr.hi = 0x00000000 dbm690t_enable, TOP MEM2: msr2.lo = 0x00000000, msr2.hi = 0x00000000 dbm690t_enable: uma size 0x08000000, memory start 0x38000000 enable_onboard_nic. Init adt7461 end , status 0x02 80 scan_static_bus for Root Device APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 scanning... PCI: 00:18.3 siblings=0 CPU: APIC: 00 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] bus ops PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:18.4, bad id 0xffffffff PCI: 00:18.5, bad id 0xffffffff PCI: 00:18.6, bad id 0xffffffff PCI: 00:18.7, bad id 0xffffffff PCI: 00:19.0, bad id 0xffffffff PCI: 00:1a.0, bad id 0xffffffff PCI: 00:1b.0, bad id 0xffffffff PCI: 00:1c.0, bad id 0xffffffff PCI: 00:1d.0, bad id 0xffffffff PCI: 00:1e.0, bad id 0xffffffff PCI: 00:1f.0, bad id 0xffffffff rs690_enable: dev=0x23cd4, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x23cd4, dev=0x25f34, port=0x8 PCI: 00:00.0 [1002/7910] ops PCI: 00:00.0 [1002/7910] enabled Capability: 0x08 @ 0xc4 flags: 0x0180 PCI: 00:00.0 count: 000c static_count: 0015 PCI: 00:00.0 [1002/7910] enabled next_unitid: 0015 PCI: pci_scan_bus for bus 00 rs690_enable: dev=0x23cd4, VID_DID=0x79101002 Bus-0, Dev-0, Fun-0. enable_pcie_bar3() gpp_sb_init nb_dev=0x23cd4, dev=0x25f34, port=0x8 PCI: 00:00.0 [1002/7910] enabled rs690_enable: dev=0x24120, VID_DID=0x79121002 Bus-0, Dev-1, Fun-0. Capability: 0x07 @ 0x44 Capability: 0x07 @ 0xb0 Capability: 0x08 @ 0x44 Capability: 0x08 @ 0x44 Capability: 0x08 @ 0xb0 Capability: 0x10 @ 0x44 Capability: 0x10 @ 0xb0 PCI: 00:01.0 [1002/7912] enabled rs690_enable: dev=0x2456c, VID_DID=0x79131002 Bus-0, Dev-2,3, Fun-0. enable=1 rs690_gfx_init, nb_dev=0x23cd4, dev=0x2456c, port=0x2. rs690_gfx_init step0. rs690_gfx_init step1. rs690_gfx_init step2. rs690_gfx_init step4. rs690_gfx_init step8.1. rs690_gfx_init step8.2. rs690_gfx_init step8.3. rs690_gfx_init step8.4. rs690_gfx_init step8.5. rs690_gfx_init step8.6. rs690_gfx_init step8.8. rs690_gfx_init step8.9. rs690_gfx_init step8.10. rs690_gfx_init step8.11. rs690_gfx_init step8.12. rs690_gfx_init step8.13. rs690_gfx_init single_port_configuration. PcieLinkTraining port=2:lc current state=2030400 rs690_gfx_init single_port_configuration step12. rs690_gfx_init single_port_configuration step13. rs690_gfx_init single_port_configuration step14. Disabling static device: PCI: 00:02.0 PCI: 00:02.1, bad id 0xffffffff PCI: 00:02.2, bad id 0xffffffff PCI: 00:02.3, bad id 0xffffffff PCI: 00:02.4, bad id 0xffffffff PCI: 00:02.5, bad id 0xffffffff PCI: 00:02.6, bad id 0xffffffff PCI: 00:02.7, bad id 0xffffffff rs690_enable: dev=0x249b8, VID_DID=0xffffffff Bus-0, Dev-2,3, Fun-0. enable=0 PCI: 00:03.1, bad id 0xffffffff PCI: 00:03.2, bad id 0xffffffff PCI: 00:03.3, bad id 0xffffffff PCI: 00:03.4, bad id 0xffffffff PCI: 00:03.5, bad id 0xffffffff PCI: 00:03.6, bad id 0xffffffff PCI: 00:03.7, bad id 0xffffffff rs690_enable: dev=0x24e04, VID_DID=0x79141002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x23cd4, dev=0x24e04, port=0x4 PcieLinkTraining port=4:lc current state=a0b0f10 addr=e0000004,bus=0,devfn=20 PcieTrainPort reg=0x0 PcieTrainPort port=0x4 result=1 Capability: 0x07 @ 0x50 Capability: 0x07 @ 0x58 Capability: 0x07 @ 0x80 Capability: 0x07 @ 0xb0 Capability: 0x07 @ 0xb8 Capability: 0x08 @ 0x50 Capability: 0x08 @ 0x58 Capability: 0x08 @ 0x80 Capability: 0x08 @ 0xb0 Capability: 0x08 @ 0xb8 Capability: 0x08 @ 0x50 Capability: 0x08 @ 0x58 Capability: 0x08 @ 0x80 Capability: 0x08 @ 0xb0 Capability: 0x08 @ 0xb8 Capability: 0x10 @ 0x50 Capability: 0x10 @ 0x58 PCI: 00:04.0 subbordinate bus PCI Express PCI: 00:04.0 [1002/7914] enabled rs690_enable: dev=0x25250, VID_DID=0x79151002 Bus-0, Dev-4,5,6,7, Fun-0. enable=0 PCI: 00:05.1, bad id 0xffffffff PCI: 00:05.2, bad id 0xffffffff PCI: 00:05.3, bad id 0xffffffff PCI: 00:05.4, bad id 0xffffffff PCI: 00:05.5, bad id 0xffffffff PCI: 00:05.6, bad id 0xffffffff PCI: 00:05.7, bad id 0xffffffff rs690_enable: dev=0x2569c, VID_DID=0x79161002 Bus-0, Dev-4,5,6,7, Fun-0. enable=0 PCI: 00:06.1, bad id 0xffffffff PCI: 00:06.2, bad id 0xffffffff PCI: 00:06.3, bad id 0xffffffff PCI: 00:06.4, bad id 0xffffffff PCI: 00:06.5, bad id 0xffffffff PCI: 00:06.6, bad id 0xffffffff PCI: 00:06.7, bad id 0xffffffff rs690_enable: dev=0x25ae8, VID_DID=0x79171002 Bus-0, Dev-4,5,6,7, Fun-0. enable=1 gpp_sb_init nb_dev=0x23cd4, dev=0x25ae8, port=0x7 PcieLinkTraining port=7:lc current state=a0b0f10 addr=e0000004,bus=0,devfn=38 PcieTrainPort reg=0x0 PcieTrainPort port=0x7 result=1 Capability: 0x07 @ 0x50 Capability: 0x07 @ 0x58 Capability: 0x07 @ 0x80 Capability: 0x07 @ 0xb0 Capability: 0x07 @ 0xb8 Capability: 0x08 @ 0x50 Capability: 0x08 @ 0x58 Capability: 0x08 @ 0x80 Capability: 0x08 @ 0xb0 Capability: 0x08 @ 0xb8 Capability: 0x08 @ 0x50 Capability: 0x08 @ 0x58 Capability: 0x08 @ 0x80 Capability: 0x08 @ 0xb0 Capability: 0x08 @ 0xb8 Capability: 0x10 @ 0x50 Capability: 0x10 @ 0x58 PCI: 00:07.0 subbordinate bus PCI Express PCI: 00:07.0 [1002/7917] enabled rs690_enable: dev=0x25f34, VID_DID=0x79181002 Bus-0, Dev-8, Fun-0. enable=0 disable_pcie_bar3() PCI: 00:08.1, bad id 0xffffffff PCI: 00:08.2, bad id 0xffffffff PCI: 00:08.3, bad id 0xffffffff PCI: 00:08.4, bad id 0xffffffff PCI: 00:08.5, bad id 0xffffffff PCI: 00:08.6, bad id 0xffffffff PCI: 00:08.7, bad id 0xffffffff PCI: 00:09.0, bad id 0xffffffff PCI: 00:0a.0, bad id 0xffffffff PCI: 00:0b.0, bad id 0xffffffff PCI: 00:0c.0, bad id 0xffffffff PCI: 00:0d.0, bad id 0xffffffff PCI: 00:0e.0, bad id 0xffffffff PCI: 00:0f.0, bad id 0xffffffff PCI: 00:10.0, bad id 0xffffffff PCI: 00:11.0, bad id 0xffffffff sb600_enable() PCI: 00:12.0 [1002/4380] ops PCI: 00:12.0 [1002/4380] enabled sb600_enable() PCI: 00:13.0 [1002/4387] ops PCI: 00:13.0 [1002/4387] enabled sb600_enable() PCI: 00:13.1 [1002/4388] ops PCI: 00:13.1 [1002/4388] enabled sb600_enable() PCI: 00:13.2 [1002/4389] ops PCI: 00:13.2 [1002/4389] enabled sb600_enable() PCI: 00:13.3 [1002/438a] ops PCI: 00:13.3 [1002/438a] enabled sb600_enable() PCI: 00:13.4 [1002/438b] ops PCI: 00:13.4 [1002/438b] enabled sb600_enable() PCI: 00:13.5 [1002/4386] ops PCI: 00:13.5 [1002/4386] enabled PCI: 00:13.6, bad id 0xffffffff PCI: 00:13.7, bad id 0xffffffff sb600_enable() PCI: 00:14.0 [1002/4385] bus ops PCI: 00:14.0 [1002/4385] enabled sb600_enable() PCI: 00:14.1 [1002/438c] ops PCI: 00:14.1 [1002/438c] enabled sb600_enable() PCI: 00:14.2 [1002/4383] ops PCI: 00:14.2 [1002/4383] enabled sb600_enable() PCI: 00:14.3 [1002/438d] bus ops PCI: 00:14.3 [1002/438d] enabled sb600_enable() PCI: 00:14.4 [1002/4384] bus ops PCI: 00:14.4 [1002/4384] enabled sb600_enable() PCI: 00:14.5 [1002/4382] ops PCI: 00:14.5 [1002/4382] enabled sb600_enable() PCI: 00:14.6 [1002/438e] ops PCI: 00:14.6 [1002/438e] enabled PCI: 00:14.7, bad id 0xffffffff do_pci_scan_bridge for PCI: 00:01.0 PCI: pci_scan_bus for bus 01 PCI: 01:00.0, bad id 0xffffffff PCI: 01:01.0, bad id 0xffffffff PCI: 01:02.0, bad id 0xffffffff PCI: 01:03.0, bad id 0xffffffff PCI: 01:04.0, bad id 0xffffffff PCI: 01:05.0 [1002/791f] ops rs690_internal_gfx_enable dev=0x26384, nb_dev=0x23cd4. nb_dev, 0x8c=0x10002333 PCI: 01:05.0 [1002/791f] enabled PCI: 01:05.1, bad id 0xffffffff malloc Enter, size 1100, free_mem_ptr 00038000 malloc 0x00038000 PCI: 01:05.2 [1002/7919] enabled PCI: 01:05.3, bad id 0xffffffff PCI: 01:05.4, bad id 0xffffffff PCI: 01:05.5, bad id 0xffffffff PCI: 01:05.6, bad id 0xffffffff PCI: 01:05.7, bad id 0xffffffff PCI: 01:06.0, bad id 0xffffffff PCI: 01:07.0, bad id 0xffffffff PCI: 01:08.0, bad id 0xffffffff PCI: 01:09.0, bad id 0xffffffff PCI: 01:0a.0, bad id 0xffffffff PCI: 01:0b.0, bad id 0xffffffff PCI: 01:0c.0, bad id 0xffffffff PCI: 01:0d.0, bad id 0xffffffff PCI: 01:0e.0, bad id 0xffffffff PCI: 01:0f.0, bad id 0xffffffff PCI: 01:10.0, bad id 0xffffffff PCI: 01:11.0, bad id 0xffffffff PCI: 01:12.0, bad id 0xffffffff PCI: 01:13.0, bad id 0xffffffff PCI: 01:14.0, bad id 0xffffffff PCI: 01:15.0, bad id 0xffffffff PCI: 01:16.0, bad id 0xffffffff PCI: 01:17.0, bad id 0xffffffff PCI: 01:18.0, bad id 0xffffffff PCI: 01:19.0, bad id 0xffffffff PCI: 01:1a.0, bad id 0xffffffff PCI: 01:1b.0, bad id 0xffffffff PCI: 01:1c.0, bad id 0xffffffff PCI: 01:1d.0, bad id 0xffffffff PCI: 01:1e.0, bad id 0xffffffff PCI: 01:1f.0, bad id 0xffffffff PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 do_pci_scan_bridge for PCI: 00:04.0 PCI: pci_scan_bus for bus 02 malloc Enter, size 1100, free_mem_ptr 0003844c malloc 0x0003844c PCI: 02:00.0 [8086/109a] enabled PCI: 02:01.0, bad id 0xffffffff PCI: 02:02.0, bad id 0xffffffff PCI: 02:03.0, bad id 0xffffffff PCI: 02:04.0, bad id 0xffffffff PCI: 02:05.0, bad id 0xffffffff PCI: 02:06.0, bad id 0xffffffff PCI: 02:07.0, bad id 0xffffffff PCI: 02:08.0, bad id 0xffffffff PCI: 02:09.0, bad id 0xffffffff PCI: 02:0a.0, bad id 0xffffffff PCI: 02:0b.0, bad id 0xffffffff PCI: 02:0c.0, bad id 0xffffffff PCI: 02:0d.0, bad id 0xffffffff PCI: 02:0e.0, bad id 0xffffffff PCI: 02:0f.0, bad id 0xffffffff PCI: 02:10.0, bad id 0xffffffff PCI: 02:11.0, bad id 0xffffffff PCI: 02:12.0, bad id 0xffffffff PCI: 02:13.0, bad id 0xffffffff PCI: 02:14.0, bad id 0xffffffff PCI: 02:15.0, bad id 0xffffffff PCI: 02:16.0, bad id 0xffffffff PCI: 02:17.0, bad id 0xffffffff PCI: 02:18.0, bad id 0xffffffff PCI: 02:19.0, bad id 0xffffffff PCI: 02:1a.0, bad id 0xffffffff PCI: 02:1b.0, bad id 0xffffffff PCI: 02:1c.0, bad id 0xffffffff PCI: 02:1d.0, bad id 0xffffffff PCI: 02:1e.0, bad id 0xffffffff PCI: 02:1f.0, bad id 0xffffffff PCI: pci_scan_bus returning with max=002 Capability: 0x10 @ 0xc8 Capability: 0x10 @ 0xd0 Capability: 0x10 @ 0xe0 PCIe: tuning PCI: 02:00.0 do_pci_scan_bridge returns max 2 do_pci_scan_bridge for PCI: 00:07.0 PCI: pci_scan_bus for bus 03 malloc Enter, size 1100, free_mem_ptr 00038898 malloc 0x00038898 PCI: 03:00.0 [8086/109a] enabled PCI: 03:01.0, bad id 0xffffffff PCI: 03:02.0, bad id 0xffffffff PCI: 03:03.0, bad id 0xffffffff PCI: 03:04.0, bad id 0xffffffff PCI: 03:05.0, bad id 0xffffffff PCI: 03:06.0, bad id 0xffffffff PCI: 03:07.0, bad id 0xffffffff PCI: 03:08.0, bad id 0xffffffff PCI: 03:09.0, bad id 0xffffffff PCI: 03:0a.0, bad id 0xffffffff PCI: 03:0b.0, bad id 0xffffffff PCI: 03:0c.0, bad id 0xffffffff PCI: 03:0d.0, bad id 0xffffffff PCI: 03:0e.0, bad id 0xffffffff PCI: 03:0f.0, bad id 0xffffffff PCI: 03:10.0, bad id 0xffffffff PCI: 03:11.0, bad id 0xffffffff PCI: 03:12.0, bad id 0xffffffff PCI: 03:13.0, bad id 0xffffffff PCI: 03:14.0, bad id 0xffffffff PCI: 03:15.0, bad id 0xffffffff PCI: 03:16.0, bad id 0xffffffff PCI: 03:17.0, bad id 0xffffffff PCI: 03:18.0, bad id 0xffffffff PCI: 03:19.0, bad id 0xffffffff PCI: 03:1a.0, bad id 0xffffffff PCI: 03:1b.0, bad id 0xffffffff PCI: 03:1c.0, bad id 0xffffffff PCI: 03:1d.0, bad id 0xffffffff PCI: 03:1e.0, bad id 0xffffffff PCI: 03:1f.0, bad id 0xffffffff PCI: pci_scan_bus returning with max=003 Capability: 0x10 @ 0xc8 Capability: 0x10 @ 0xd0 Capability: 0x10 @ 0xe0 PCIe: tuning PCI: 03:00.0 do_pci_scan_bridge returns max 3 scan_static_bus for PCI: 00:14.0 smbus: PCI: 00:14.0[0]->I2C: 01:50 enabled smbus: PCI: 00:14.0[0]->I2C: 01:51 enabled smbus: PCI: 00:14.0[0]->I2C: 01:52 enabled smbus: PCI: 00:14.0[0]->I2C: 01:53 enabled scan_static_bus for PCI: 00:14.0 done scan_static_bus for PCI: 00:14.3 PNP: 002e.0 disabled PNP: 002e.1 enabled PNP: 002e.2 disabled PNP: 002e.3 disabled PNP: 002e.4 disabled PNP: 002e.5 disabled PNP: 002e.6 enabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled scan_static_bus for PCI: 00:14.3 done do_pci_scan_bridge for PCI: 00:14.4 PCI: pci_scan_bus for bus 04 PCI: 04:00.0, bad id 0xffffffff PCI: 04:01.0, bad id 0xffffffff PCI: 04:02.0, bad id 0xffffffff PCI: 04:03.0, bad id 0xffffffff PCI: 04:04.0, bad id 0xffffffff PCI: 04:05.0, bad id 0xffffffff PCI: 04:06.0, bad id 0xffffffff PCI: 04:07.0, bad id 0xffffffff PCI: 04:08.0, bad id 0xffffffff PCI: 04:09.0, bad id 0xffffffff PCI: 04:0a.0, bad id 0xffffffff PCI: 04:0b.0, bad id 0xffffffff PCI: 04:0c.0, bad id 0xffffffff PCI: 04:0d.0, bad id 0xffffffff PCI: 04:0e.0, bad id 0xffffffff PCI: 04:0f.0, bad id 0xffffffff PCI: 04:10.0, bad id 0xffffffff PCI: 04:11.0, bad id 0xffffffff PCI: 04:12.0, bad id 0xffffffff PCI: 04:13.0, bad id 0xffffffff PCI: 04:14.0, bad id 0xffffffff PCI: 04:15.0, bad id 0xffffffff PCI: 04:16.0, bad id 0xffffffff PCI: 04:17.0, bad id 0xffffffff PCI: 04:18.0, bad id 0xffffffff PCI: 04:19.0, bad id 0xffffffff PCI: 04:1a.0, bad id 0xffffffff PCI: 04:1b.0, bad id 0xffffffff PCI: 04:1c.0, bad id 0xffffffff PCI: 04:1d.0, bad id 0xffffffff PCI: 04:1e.0, bad id 0xffffffff PCI: 04:1f.0, bad id 0xffffffff PCI: pci_scan_bus returning with max=004 do_pci_scan_bridge returns max 4 PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus returning with max=004 PCI_DOMAIN: 0000 passpw: enabled scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_resource io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI: 00:18.0 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:00.0 register 1c(e0000004), read-only ignoring it PCI: 00:01.0 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:01.0 read_resources bus 1 link: 0 rs690_gfx_read_resources. PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 20 * [0x00000000 - 0x000000ff] io PCI: 00:01.0 compute_allocate_resource io: base: 00000100 size: 00001000 align: 12 gran: 12 done PCI: 00:01.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:01.0 read_resources bus 1 link: 0 PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 10 * [0x00000000 - 0x07ffffff] prefmem PCI: 00:01.0 compute_allocate_resource prefmem: base: 08000000 size: 08000000 align: 27 gran: 20 done PCI: 00:01.0 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:01.0 read_resources bus 1 link: 0 PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 24 * [0x00000000 - 0x000fffff] mem PCI: 01:05.0 18 * [0x00100000 - 0x0010ffff] mem PCI: 01:05.2 10 * [0x00110000 - 0x00113fff] mem PCI: 00:01.0 compute_allocate_resource mem: base: 00114000 size: 00200000 align: 20 gran: 20 done PCI: 00:04.0 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 02:00.0 18 * [0x00000000 - 0x0000001f] io PCI: 00:04.0 compute_allocate_resource io: base: 00000020 size: 00001000 align: 12 gran: 12 done PCI: 00:04.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 00:04.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:04.0 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 00:04.0 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:04.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 02 prefmem PCI: 00:04.0 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 02:00.0 10 * [0x00000000 - 0x0001ffff] mem PCI: 00:04.0 compute_allocate_resource mem: base: 00020000 size: 00100000 align: 20 gran: 20 done PCI: 00:07.0 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 03:00.0 18 * [0x00000000 - 0x0000001f] io PCI: 00:07.0 compute_allocate_resource io: base: 00000020 size: 00001000 align: 12 gran: 12 done PCI: 00:07.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 00:07.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:07.0 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 00:07.0 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:07.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 03 prefmem PCI: 00:07.0 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 03:00.0 14 * [0x00000000 - 0x003fffff] mem PCI: 03:00.0 10 * [0x00400000 - 0x0041ffff] mem PCI: 00:07.0 compute_allocate_resource mem: base: 00420000 size: 00500000 align: 22 gran: 20 done PCI: 00:14.3 read_resources bus 0 link: 0 PCI: 00:14.3 read_resources bus 0 link: 0 done PCI: 00:14.4 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource io: base: 00000000 size: 00000000 align: 12 gran: 12 done PCI: 00:14.4 compute_allocate_resource io: base: 0000f000 size: 00000000 align: 12 gran: 12 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource io: base: 0000f000 size: 00000000 align: 12 gran: 12 done PCI: 00:14.4 1c <- [0x000000f000 - 0x000000efff] size 0x00000000 gran 0x0c bus 04 io PCI: 00:14.4 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:14.4 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:14.4 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 prefmem PCI: 00:14.4 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:14.4 compute_allocate_resource mem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:14.4 read_resources bus 4 link: 0 PCI: 00:14.4 read_resources bus 4 link: 0 done PCI: 00:14.4 compute_allocate_resource mem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:14.4 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 mem PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:01.0 1c * [0x00000000 - 0x00000fff] io PCI: 00:04.0 1c * [0x00001000 - 0x00001fff] io PCI: 00:07.0 1c * [0x00002000 - 0x00002fff] io PCI: 00:12.0 20 * [0x00003000 - 0x0000300f] io PCI: 00:14.1 20 * [0x00003010 - 0x0000301f] io PCI: 00:12.0 10 * [0x00003020 - 0x00003027] io PCI: 00:12.0 18 * [0x00003030 - 0x00003037] io PCI: 00:14.1 10 * [0x00003040 - 0x00003047] io PCI: 00:14.1 18 * [0x00003050 - 0x00003057] io PCI: 00:12.0 14 * [0x00003060 - 0x00003063] io PCI: 00:12.0 1c * [0x00003070 - 0x00003073] io PCI: 00:14.1 14 * [0x00003080 - 0x00003083] io PCI: 00:14.1 1c * [0x00003090 - 0x00003093] io PCI: 00:18.0 compute_allocate_resource io: base: 00003094 size: 00004000 align: 12 gran: 12 done PCI: 00:18.0 compute_allocate_resource prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:01.0 24 * [0x00000000 - 0x07ffffff] prefmem PCI: 00:18.0 compute_allocate_resource prefmem: base: 08000000 size: 08000000 align: 27 gran: 20 done PCI: 00:18.0 compute_allocate_resource mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:07.0 20 * [0x00000000 - 0x004fffff] mem PCI: 00:01.0 20 * [0x00500000 - 0x006fffff] mem PCI: 00:04.0 20 * [0x00700000 - 0x007fffff] mem PCI: 00:14.2 10 * [0x00800000 - 0x00803fff] mem PCI: 00:13.0 10 * [0x00804000 - 0x00804fff] mem PCI: 00:13.1 10 * [0x00805000 - 0x00805fff] mem PCI: 00:13.2 10 * [0x00806000 - 0x00806fff] mem PCI: 00:13.3 10 * [0x00807000 - 0x00807fff] mem PCI: 00:13.4 10 * [0x00808000 - 0x00808fff] mem PCI: 00:12.0 24 * [0x00809000 - 0x008093ff] mem PCI: 00:13.5 10 * [0x0080a000 - 0x0080a0ff] mem PCI: 00:14.5 10 * [0x0080b000 - 0x0080b0ff] mem PCI: 00:14.6 10 * [0x0080c000 - 0x0080c0ff] mem PCI: 00:14.3 a0 * [0x0080d000 - 0x0080d01f] mem PCI: 00:18.0 compute_allocate_resource mem: base: 0080d020 size: 00900000 align: 22 gran: 20 done PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1c0 * [0x00001000 - 0x00004fff] io Root Device compute_allocate_resource io: base: 00005000 size: 00004c00 align: 12 gran: 0 done Root Device compute_allocate_resource mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1b8 * [0x00000000 - 0x07ffffff] prefmem PCI: 00:18.3 94 * [0x08000000 - 0x0bffffff] mem PCI: 00:18.0 1b0 * [0x0c000000 - 0x0c8fffff] mem Root Device compute_allocate_resource mem: base: 0c900000 size: 0c900000 align: 27 gran: 0 done Done reading resources. Allocating VGA resource PCI: 01:05.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... Root Device compute_allocate_resource io: base: 00001000 size: 00004c00 align: 12 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1c0 * [0x00001000 - 0x00004fff] io Root Device compute_allocate_resource io: base: 00005000 size: 00004000 align: 12 gran: 0 done Root Device compute_allocate_resource mem: base: f0000000 size: 0c900000 align: 27 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:18.0 1b8 * [0xf0000000 - 0xf7ffffff] prefmem PCI: 00:18.3 94 * [0xf8000000 - 0xfbffffff] mem PCI: 00:18.0 1b0 * [0xfc000000 - 0xfc8fffff] mem Root Device compute_allocate_resource mem: base: fc900000 size: 0c900000 align: 27 gran: 0 done Root Device assign_resources, bus 0 link: 0 PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 compute_allocate_resource io: base: 00001000 size: 00004000 align: 12 gran: 12 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:01.0 1c * [0x00001000 - 0x00001fff] io PCI: 00:04.0 1c * [0x00002000 - 0x00002fff] io PCI: 00:07.0 1c * [0x00003000 - 0x00003fff] io PCI: 00:12.0 20 * [0x00004000 - 0x0000400f] io PCI: 00:14.1 20 * [0x00004010 - 0x0000401f] io PCI: 00:12.0 10 * [0x00004020 - 0x00004027] io PCI: 00:12.0 18 * [0x00004030 - 0x00004037] io PCI: 00:14.1 10 * [0x00004040 - 0x00004047] io PCI: 00:14.1 18 * [0x00004050 - 0x00004057] io PCI: 00:12.0 14 * [0x00004060 - 0x00004063] io PCI: 00:12.0 1c * [0x00004070 - 0x00004073] io PCI: 00:14.1 14 * [0x00004080 - 0x00004083] io PCI: 00:14.1 1c * [0x00004090 - 0x00004093] io PCI: 00:18.0 compute_allocate_resource io: base: 00004094 size: 00004000 align: 12 gran: 12 done amdk8_set_resource, enabling legacy VGA IO forwarding for PCI: 00:18.0 link <NULL> PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000004fff] size 0x00004000 gran 0x0c io <node 0 link 0> PCI: 00:18.0 compute_allocate_resource prefmem: base: f0000000 size: 08000000 align: 27 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:01.0 24 * [0xf0000000 - 0xf7ffffff] prefmem PCI: 00:18.0 compute_allocate_resource prefmem: base: f8000000 size: 08000000 align: 27 gran: 20 done PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x14 prefmem <node 0 link 0> PCI: 00:18.0 compute_allocate_resource mem: base: fc000000 size: 00900000 align: 22 gran: 20 PCI: 00:18.0 read_resources bus 0 link: 0 PCI: 00:18.0 read_resources bus 0 link: 0 done PCI: 00:07.0 20 * [0xfc000000 - 0xfc4fffff] mem PCI: 00:01.0 20 * [0xfc500000 - 0xfc6fffff] mem PCI: 00:04.0 20 * [0xfc700000 - 0xfc7fffff] mem PCI: 00:14.2 10 * [0xfc800000 - 0xfc803fff] mem PCI: 00:13.0 10 * [0xfc804000 - 0xfc804fff] mem PCI: 00:13.1 10 * [0xfc805000 - 0xfc805fff] mem PCI: 00:13.2 10 * [0xfc806000 - 0xfc806fff] mem PCI: 00:13.3 10 * [0xfc807000 - 0xfc807fff] mem PCI: 00:13.4 10 * [0xfc808000 - 0xfc808fff] mem PCI: 00:12.0 24 * [0xfc809000 - 0xfc8093ff] mem PCI: 00:13.5 10 * [0xfc80a000 - 0xfc80a0ff] mem PCI: 00:14.5 10 * [0xfc80b000 - 0xfc80b0ff] mem PCI: 00:14.6 10 * [0xfc80c000 - 0xfc80c0ff] mem PCI: 00:14.3 a0 * [0xfc80d000 - 0xfc80d01f] mem PCI: 00:18.0 compute_allocate_resource mem: base: fc80d020 size: 00900000 align: 22 gran: 20 done PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc8fffff] size 0x00900000 gran 0x14 mem <node 0 link 0> PCI: 00:18.0 assign_resources, bus 0 link: 0 PCI: 00:01.0 compute_allocate_resource io: base: 00001000 size: 00001000 align: 12 gran: 12 PCI: 00:01.0 read_resources bus 1 link: 0 PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 20 * [0x00001000 - 0x000010ff] io PCI: 00:01.0 compute_allocate_resource io: base: 00001100 size: 00001000 align: 12 gran: 12 done PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io PCI: 00:01.0 compute_allocate_resource prefmem: base: f0000000 size: 08000000 align: 27 gran: 20 PCI: 00:01.0 read_resources bus 1 link: 0 PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 10 * [0xf0000000 - 0xf7ffffff] prefmem PCI: 00:01.0 compute_allocate_resource prefmem: base: f8000000 size: 08000000 align: 27 gran: 20 done PCI: 00:01.0 24 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x14 bus 01 prefmem PCI: 00:01.0 compute_allocate_resource mem: base: fc500000 size: 00200000 align: 20 gran: 20 PCI: 00:01.0 read_resources bus 1 link: 0 PCI: 00:01.0 read_resources bus 1 link: 0 done PCI: 01:05.0 24 * [0xfc500000 - 0xfc5fffff] mem PCI: 01:05.0 18 * [0xfc600000 - 0xfc60ffff] mem PCI: 01:05.2 10 * [0xfc610000 - 0xfc613fff] mem PCI: 00:01.0 compute_allocate_resource mem: base: fc614000 size: 00200000 align: 20 gran: 20 done PCI: 00:01.0 20 <- [0x00fc500000 - 0x00fc6fffff] size 0x00200000 gran 0x14 bus 01 mem PCI: 00:01.0 assign_resources, bus 1 link: 0 PCI: 01:05.0 10 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x1b prefmem64 PCI: 01:05.0 18 <- [0x00fc600000 - 0x00fc60ffff] size 0x00010000 gran 0x10 mem64 PCI: 01:05.0 20 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io PCI: 01:05.0 24 <- [0x00fc500000 - 0x00fc5fffff] size 0x00100000 gran 0x14 mem PCI: 01:05.0 30 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x00 romem PCI: 01:05.2 10 <- [0x00fc610000 - 0x00fc613fff] size 0x00004000 gran 0x0e mem64 PCI: 00:01.0 assign_resources, bus 1 link: 0 PCI: 00:04.0 compute_allocate_resource io: base: 00002000 size: 00001000 align: 12 gran: 12 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 02:00.0 18 * [0x00002000 - 0x0000201f] io PCI: 00:04.0 compute_allocate_resource io: base: 00002020 size: 00001000 align: 12 gran: 12 done PCI: 00:04.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io PCI: 00:04.0 compute_allocate_resource mem: base: fc700000 size: 00100000 align: 20 gran: 20 PCI: 00:04.0 read_resources bus 2 link: 0 PCI: 00:04.0 read_resources bus 2 link: 0 done PCI: 02:00.0 10 * [0xfc700000 - 0xfc71ffff] mem PCI: 00:04.0 compute_allocate_resource mem: base: fc720000 size: 00100000 align: 20 gran: 20 done PCI: 00:04.0 20 <- [0x00fc700000 - 0x00fc7fffff] size 0x00100000 gran 0x14 bus 02 mem PCI: 00:04.0 assign_resources, bus 2 link: 0 PCI: 02:00.0 10 <- [0x00fc700000 - 0x00fc71ffff] size 0x00020000 gran 0x11 mem PCI: 02:00.0 18 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io PCI: 00:04.0 assign_resources, bus 2 link: 0 PCI: 00:07.0 compute_allocate_resource io: base: 00003000 size: 00001000 align: 12 gran: 12 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 03:00.0 18 * [0x00003000 - 0x0000301f] io PCI: 00:07.0 compute_allocate_resource io: base: 00003020 size: 00001000 align: 12 gran: 12 done PCI: 00:07.0 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 03 io PCI: 00:07.0 compute_allocate_resource mem: base: fc000000 size: 00500000 align: 22 gran: 20 PCI: 00:07.0 read_resources bus 3 link: 0 PCI: 00:07.0 read_resources bus 3 link: 0 done PCI: 03:00.0 14 * [0xfc000000 - 0xfc3fffff] mem PCI: 03:00.0 10 * [0xfc400000 - 0xfc41ffff] mem PCI: 00:07.0 compute_allocate_resource mem: base: fc420000 size: 00500000 align: 22 gran: 20 done PCI: 00:07.0 20 <- [0x00fc000000 - 0x00fc4fffff] size 0x00500000 gran 0x14 bus 03 mem PCI: 00:07.0 assign_resources, bus 3 link: 0 PCI: 03:00.0 10 <- [0x00fc400000 - 0x00fc41ffff] size 0x00020000 gran 0x11 mem PCI: 03:00.0 14 <- [0x00fc000000 - 0x00fc3fffff] size 0x00400000 gran 0x16 mem PCI: 03:00.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io PCI: 00:07.0 assign_resources, bus 3 link: 0 PCI: 00:12.0 10 <- [0x0000004020 - 0x0000004027] size 0x00000008 gran 0x03 io PCI: 00:12.0 14 <- [0x0000004060 - 0x0000004063] size 0x00000004 gran 0x02 io PCI: 00:12.0 18 <- [0x0000004030 - 0x0000004037] size 0x00000008 gran 0x03 io PCI: 00:12.0 1c <- [0x0000004070 - 0x0000004073] size 0x00000004 gran 0x02 io PCI: 00:12.0 20 <- [0x0000004000 - 0x000000400f] size 0x00000010 gran 0x04 io PCI: 00:12.0 24 <- [0x00fc809000 - 0x00fc8093ff] size 0x00000400 gran 0x0a mem PCI: 00:13.0 10 <- [0x00fc804000 - 0x00fc804fff] size 0x00001000 gran 0x0c mem PCI: 00:13.1 10 <- [0x00fc805000 - 0x00fc805fff] size 0x00001000 gran 0x0c mem PCI: 00:13.2 10 <- [0x00fc806000 - 0x00fc806fff] size 0x00001000 gran 0x0c mem PCI: 00:13.3 10 <- [0x00fc807000 - 0x00fc807fff] size 0x00001000 gran 0x0c mem PCI: 00:13.4 10 <- [0x00fc808000 - 0x00fc808fff] size 0x00001000 gran 0x0c mem PCI: 00:13.5 10 <- [0x00fc80a000 - 0x00fc80a0ff] size 0x00000100 gran 0x08 mem ERROR: PCI: 00:14.0 74 mem size: 0x0000001000 not assigned ERROR: PCI: 00:14.0 14 mem size: 0x0000000400 not assigned ERROR: PCI: 00:14.0 10 io size: 0x0000000010 not assigned PCI: 00:14.0 assign_resources, bus 1 link: 0 PCI: 00:14.0 assign_resources, bus 1 link: 0 PCI: 00:14.1 10 <- [0x0000004040 - 0x0000004047] size 0x00000008 gran 0x03 io PCI: 00:14.1 14 <- [0x0000004080 - 0x0000004083] size 0x00000004 gran 0x02 io PCI: 00:14.1 18 <- [0x0000004050 - 0x0000004057] size 0x00000008 gran 0x03 io PCI: 00:14.1 1c <- [0x0000004090 - 0x0000004093] size 0x00000004 gran 0x02 io PCI: 00:14.1 20 <- [0x0000004010 - 0x000000401f] size 0x00000010 gran 0x04 io PCI: 00:14.2 10 <- [0x00fc800000 - 0x00fc803fff] size 0x00004000 gran 0x0e mem64 PCI: 00:14.3 a0 <- [0x00fc80d000 - 0x00fc80d01f] size 0x00000020 gran 0x05 mem PCI: 00:14.3 assign_resources, bus 0 link: 0 PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq PCI: 00:14.3 assign_resources, bus 0 link: 0 PCI: 00:14.5 10 <- [0x00fc80b000 - 0x00fc80b0ff] size 0x00000100 gran 0x08 mem PCI: 00:14.6 10 <- [0x00fc80c000 - 0x00fc80c0ff] size 0x00000100 gran 0x08 mem PCI: 00:18.0 assign_resources, bus 0 link: 0 PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart> PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 00 PCI: 00:00.0 subsystem <- 1022/3050 PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 bridge ctrl <- 000b PCI: 00:01.0 cmd <- 07 PCI: 01:05.0 subsystem <- 1022/3050 PCI: 01:05.0 cmd <- 03 PCI: 01:05.2 cmd <- 02 PCI: 00:04.0 bridge ctrl <- 0003 PCI: 00:04.0 cmd <- 07 PCI: 02:00.0 cmd <- 03 PCI: 00:07.0 bridge ctrl <- 0003 PCI: 00:07.0 cmd <- 07 PCI: 03:00.0 cmd <- 03 PCI: 00:12.0 cmd <- 03 PCI: 00:13.0 subsystem <- 1022/3050 PCI: 00:13.0 cmd <- 02 PCI: 00:13.1 subsystem <- 1022/3050 PCI: 00:13.1 cmd <- 02 PCI: 00:13.2 subsystem <- 1022/3050 PCI: 00:13.2 cmd <- 02 PCI: 00:13.3 subsystem <- 1022/3050 PCI: 00:13.3 cmd <- 02 PCI: 00:13.4 subsystem <- 1022/3050 PCI: 00:13.4 cmd <- 02 PCI: 00:13.5 subsystem <- 1022/3050 PCI: 00:13.5 cmd <- 02 PCI: 00:14.0 subsystem <- 1022/3050 PCI: 00:14.0 cmd <- 403 PCI: 00:14.1 subsystem <- 1022/3050 PCI: 00:14.1 cmd <- 01 PCI: 00:14.2 subsystem <- 1022/3050 PCI: 00:14.2 cmd <- 02 PCI: 00:14.3 subsystem <- 1022/3050 PCI: 00:14.3 cmd <- 0f sb600 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff PCI: 00:14.4 bridge ctrl <- 0003 PCI: 00:14.4 cmd <- 01 PCI: 00:14.5 subsystem <- 1022/3050 PCI: 00:14.5 cmd <- 02 PCI: 00:14.6 subsystem <- 1022/3050 PCI: 00:14.6 cmd <- 02 PCI: 00:18.1 subsystem <- 1022/3050 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 1022/3050 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 cmd <- 00 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 60fc2 CPU: family 0f, model 6c, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB ADDRESS_MASK_HIGH=0xff DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Processor model unknown Setting up local apic... apic_id: 0x00 done. ECC Disabled CPU #0 initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:00.0 init pcie_init in rs690_ht.c PCI: 01:05.0 init internal_gfx_pci_dev_init device=791f, vendor=1002, vga_rom_address=0xfff00000. rom address for PCI: 01:05.0 = fff00000 PCI Expansion ROM, signature 0xaa55, INIT size 0xda00, data ptr 0x01a4 PCI ROM Image, Vendor 1002, Device 791f, PCI ROM Image, Class Code 030000, Code Type 00 copying VGA ROM Image from 0xfff00000 to 0xc0000, 0xda00 bytes entering emulator PCI: 00:12.0 init sata_bar0=4020 sata_bar1=4060 sata_bar2=4030 sata_bar3=4070 sata_bar4=4000 sata_bar5=fc809000 SATA port 0 status = 1 SATA device detected but not talking. Trying lower speed. SATA port 0 status = 13 drive detection done after 0 ms Primary Master device is ready after 1 tries SATA port 1 status = 0 No Primary Slave SATA drive on Slot1 SATA port 2 status = 0 No Secondary Master SATA drive on Slot2 SATA port 3 status = 0 No Secondary Slave SATA drive on Slot3 PCI: 00:13.0 init PCI: 00:13.1 init PCI: 00:13.2 init PCI: 00:13.3 init PCI: 00:13.4 init PCI: 00:13.5 init usb2_bar0=fc80a000 PCI: 00:14.0 init sm_init(). lapicid = 0000000000000000 set power on after power fail ++++++++++no set NMI+++++ RTC Init 3.11, ABCFG:0x54 3.12, ABCFG:0x54 sm_init() end PCI: 00:14.1 init PCI: 00:14.2 init base = fc800000 No codec! PCI: 00:14.3 init PNP: 002e.1 init PNP: 002e.6 init PCI: 00:14.4 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 01:05.2 init PCI: 02:00.0 init PCI: 03:00.0 init Devices initialized Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done. Wrote the mp table end at: 00000020 - 000001b0 Moving GDT to 0x500...ok Multiboot Information structure has been written. Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f04d0 to 0x00100000 uma_memory_start=0x38000000, uma_memory_size=0x8000000 Wrote coreboot table at: 00000530 - 00000780 checksum cd66 elfboot: Attempting to load payload. rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 00038ce4 malloc 0x00038ce4 New segment addr 0x100000 size 0x3636c0 offset 0xe0 filesize 0x97d4 (cleaned up) New segment addr 0x100000 size 0x3636c0 offset 0xe0 filesize 0x97d4 lb: [0x0000000000004000, 0x000000000003c000) malloc Enter, size 32, free_mem_ptr 00038d04 malloc 0x00038d04 New segment addr 0x4636c0 size 0x48 offset 0x98b4 filesize 0x48 (cleaned up) New segment addr 0x4636c0 size 0x48 offset 0x98b4 filesize 0x48 lb: [0x0000000000004000, 0x000000000003c000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000003636c0 filesz: 0x00000000000097d4 [ 0x0000000000100000, 00000000001097d4, 0x00000000004636c0) <- 00000000000000e0 Clearing Segment: addr: 0x00000000001097d4 memsz: 0x0000000000359eec Loading Segment: addr: 0x00000000004636c0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 [ 0x00000000004636c0, 0000000000463708, 0x0000000000463708) <- 00000000000098b4 Loaded segments verified segments closed down stream Jumping to boot code at 0x100088 entry = 0x00100088 lb_start = 0x00004000 lb_size = 0x00038000 adjust = 0x37fc4000 buffer = 0x37f90000 elf_boot_notes = 0x0002e6f0 adjusted_boot_notes = 0x37ff26f0 FILO version 0.6.0rc1 (lykowdk@lykowdk-desktop) Fri Jan 23 16:37:08 PST 2009 No USB stack in libpayload. boot: hda1:/boot/bzImage root=/dev/sda1 libata.force=1:1.5g console=tty0 console=ttyS0,115200 IDE time out reset failed, but slave may exist hda: LBA 4026MB: SATADOM H Type Found Linux version 2.6.26.8 (lykowdk@lykowdk-desktop) #1 PREEMPT Fri Jan 23 16:23:29 PST 2009 bzIma. Loading kernel... ok Jumping to entry point... [ 0.000000] Linux version 2.6.26.8 (lykowdk@lykowdk-desktop) (gcc version 4.2.4 (Ubuntu 4.2.4-1ub9 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000038000000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c0000010] 00000010 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 229376 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 229376 [ 0.000000] DMI not present or invalid. [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: ATI Product ID: DBM690T <6>MPTABLE: Product ID: DBM690T 0 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c8000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584 [ 0.000000] Kernel command line: root=/dev/sda1 libata.force=1:1.5g console=tty0 console=ttyS0,110 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1000.075 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 906732k/917504k available (1373k kernel code, 10288k reserved, 552k data, 128) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfffad000 - 0xfffff000 ( 328 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc02e4000 - 0xc0304000 ( 128 kB) [ 0.004000] .data : 0xc025743d - 0xc02e1768 ( 552 kB) [ 0.004000] .text : 0xc0100000 - 0xc025743d (1373 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.084008] Calibrating delay using timer specific routine.. 2002.02 BogoMIPS (lpj=4004056) [ 0.096006] Mount-cache hash table entries: 512 [ 0.100006] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.104006] CPU: L2 Cache: 256K (64 bytes/line) [ 0.108006] CPU: AMD Processor model unknown stepping 02 [ 0.118526] Checking 'hlt' instruction... OK. [ 0.140008] Freeing SMP alternatives: 0k freed [ 0.144009] ExtINT not setup in hardware but reported by MP table [ 0.148009] ENABLING IO-APIC IRQs [ 0.152009] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.304019] net_namespace: 192 bytes [ 0.308019] NET: Registered protocol family 16 [ 0.312019] PCI: Using configuration type 1 for base access [ 0.316019] Setting up standard PCI resources [ 0.320020] SCSI subsystem initialized [ 0.324020] usbcore: registered new interface driver usbfs [ 0.328020] usbcore: registered new interface driver hub [ 0.332020] usbcore: registered new device driver usb [ 0.336021] PCI: Probing PCI hardware [ 0.340021] pci 0000:00:12.0: set SATA to AHCI mode [ 0.344021] PCI: Transparent bridge - 0000:00:14.4 [ 0.350052] PCI: Using IRQ router default [1002/4384] at 0000:00:14.4 [ 0.356022] PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 22 [ 0.360022] PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 16 [ 0.364022] PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 17 [ 0.368023] PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 18 [ 0.372023] PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 17 [ 0.376023] PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 18 [ 0.380023] PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 19 [ 0.384024] PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 16 [ 0.388024] PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 16 [ 0.392024] PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 18 [ 0.396024] PCI->APIC IRQ transform: 0000:01:05.2[B] -> IRQ 19 [ 0.400025] PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16 [ 0.404025] PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 19 [ 0.408025] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [ 0.412025] PCI: Bridge: 0000:00:01.0 [ 0.416027] IO window: 1000-1fff [ 0.420032] MEM window: 0xfc500000-0xfc6fffff [ 0.427975] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff [ 0.440718] PCI: Bridge: 0000:00:04.0 [ 0.448082] IO window: 2000-2fff [ 0.454929] MEM window: 0xfc700000-0xfc7fffff [ 0.464029] PREFETCH window: disabled. [ 0.471919] PCI: Bridge: 0000:00:07.0 [ 0.479285] IO window: 3000-3fff [ 0.486133] MEM window: 0xfc000000-0xfc4fffff [ 0.495233] PREFETCH window: disabled. [ 0.503122] PCI: Bridge: 0000:00:14.4 [ 0.510485] IO window: disabled. [ 0.517322] MEM window: disabled. [ 0.524338] PREFETCH window: disabled. [ 0.532289] NET: Registered protocol family 2 [ 0.541176] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.555944] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.575082] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.585604] TCP: Hash tables configured (established 131072 bind 65536) [ 0.598869] TCP reno registered [ 0.605308] NET: Registered protocol family 1 [ 0.618622] msgmni has been set to 1771 [ 0.623449] io scheduler noop registered [ 0.631388] io scheduler deadline registered (default) [ 0.642046] assign_interrupt_mode Found MSI capability [ 0.652488] assign_interrupt_mode Found MSI capability [ 0.668242] Linux agpgart interface v0.103 [ 0.676672] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.692795] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.705378] Driver 'sd' needs updating - please use bus_type methods [ 0.718265] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.735380] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.751352] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 1.770543] scsi0 : ahci [ 1.775350] scsi1 : ahci [ 1.780592] scsi2 : ahci [ 1.787090] scsi3 : ahci [ 1.791263] ata1: FORCE: PHY spd limit set to 1.5Gbps [ 1.798702] ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22 [ 1.815099] ata2: SATA max UDMA/133 abar m1024@0xfc809000 port 0xfc809180 irq 22 [ 1.829932] ata3: SATA max UDMA/133 abar m1024@0xfc809000 port 0xfc809200 irq 22 [ 1.844754] ata4: SATA max UDMA/133 abar m1024@0xfc809000 port 0xfc809280 irq 22 [ 2.051406] Clocksource tsc unstable (delta = 71972991 ns) [ 2.589666] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.595123] ata1.00: ATA-5: SATADOM H Type, rs1.a000, max UDMA/33 [ 2.599123] ata1.00: 7863408 sectors, multi 0: LBA [ 2.603123] ata1.00: applying bridge limits [ 2.607123] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.611123] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.615123] ata1.00: configured for UDMA/33 [ 2.954655] ata2: SATA link down (SStatus 0 SControl 300) [ 3.291988] ata3: SATA link down (SStatus 0 SControl 300) [ 3.631999] ata4: SATA link down (SStatus 0 SControl 300) [ 3.652400] scsi 0:0:0:0: Direct-Access ATA SATADOM H Type rs1. PQ: 0 ANSI: 5 [ 3.659122] sd 0:0:0:0: [sda] 7863408 512-byte hardware sectors (4026 MB) [ 3.663122] sd 0:0:0:0: [sda] Write Protect is off [ 3.667122] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or A [ 3.671122] sd 0:0:0:0: [sda] 7863408 512-byte hardware sectors (4026 MB) [ 3.675122] sd 0:0:0:0: [sda] Write Protect is off [ 3.679122] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or A [ 3.683122] sda: sda1 sda2 [ 3.689739] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.695122] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 3.699122] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 3.703122] ehci_hcd 0000:00:13.5: debug port 1 [ 3.707122] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc80a000 [ 3.722658] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.727122] usb usb1: configuration #1 chosen from 1 choice [ 3.731122] hub 1-0:1.0: USB hub found [ 3.735122] hub 1-0:1.0: 10 ports detected [ 3.841186] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.847122] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 3.851122] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc804000 [ 3.913880] usb usb2: configuration #1 chosen from 1 choice [ 3.919122] hub 2-0:1.0: USB hub found [ 3.923122] hub 2-0:1.0: 2 ports detected [ 4.028229] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.035122] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 4.039122] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc805000 [ 4.102103] usb usb3: configuration #1 chosen from 1 choice [ 4.107122] hub 3-0:1.0: USB hub found [ 4.111122] hub 3-0:1.0: 2 ports detected [ 4.216031] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 4.223122] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 4.227122] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc806000 [ 4.290207] usb usb4: configuration #1 chosen from 1 choice [ 4.295122] hub 4-0:1.0: USB hub found [ 4.299122] hub 4-0:1.0: 2 ports detected [ 4.404208] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 4.411122] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 4.415122] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc807000 [ 4.478198] usb usb5: configuration #1 chosen from 1 choice [ 4.483122] hub 5-0:1.0: USB hub found [ 4.487122] hub 5-0:1.0: 2 ports detected [ 4.508051] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 4.593314] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 4.599122] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 4.603122] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc808000 [ 4.651122] usb 1-3: configuration #1 chosen from 1 choice [ 4.663505] usb usb6: configuration #1 chosen from 1 choice [ 4.671122] hub 6-0:1.0: USB hub found [ 4.675122] hub 6-0:1.0: 2 ports detected [ 4.780258] Initializing USB Mass Storage driver... [ 4.908902] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 5.071065] usb 2-1: configuration #1 chosen from 1 choice [ 5.331920] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 5.496211] usb 2-2: configuration #1 chosen from 1 choice [ 5.506467] scsi4 : SCSI emulation for USB Mass Storage devices [ 5.511122] usbcore: registered new interface driver usb-storage [ 5.515122] USB Mass Storage support registered. [ 5.519122] i8042.c: No controller found. [ 5.523122] mice: PS/2 mouse device common for all mice [ 10.508240] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9712 PQ: 0 ANSI: 0 [ 10.515122] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 15.523616] drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 15.531122] usbhid: timeout initializing reports [ 15.535122] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:13.0/usb2/2-1/20 [ 15.539122] input: USB HID v2.10 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:13.0-1 [ 15.547122] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/in1 [ 15.551122] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-2 [ 15.559122] usbcore: registered new interface driver usbhid [ 15.563122] usbhid: v2.6:USB HID core driver [ 15.567122] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 15.595169] hda-intel: no codecs found! [ 15.647522] ALSA device list: [ 15.653496] #0: HDA ATI HDMI at 0xfc610000 irq 19 [ 15.659122] TCP cubic registered [ 15.663122] Using IPI Shortcut mode [ 15.668852] VFS: Mounted root (ext2 filesystem) readonly. [ 15.675122] Freeing unused kernel memory: 128k freed [ 15.679122] Write protecting the kernel text: 1376k [ 15.683122] Write protecting the kernel read-only data: 420k [ 15.900808] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended mount: mounting proc on /proc failed: Device or resource busy Populating /dev using udev: done Initializing random number generator... done. Starting system message bus: done Starting network... ip: RTNETLINK answers: File exists #

2 1

Re: [coreboot] [PATCH 0/4] Artec Group ThinCan DBE63 support
by Mart Raudsepp 25 Jan '09

25 Jan '09

> Hi Mart, Hey, > this is awesome, thanks! > Unfortunately I won't have time to review this in the next 6 weeks, so > if you get any Ack, don't delay. v3 can use some new activity. Professors bothering you again? :) > On 22.01.2009 20:03, Mart Raudsepp wrote: >> The following four patches in subsequent e-mails are a coreboot-v3 port >> to Artec Group ThinCan DBE63 whose prototype is on my table. >> [...] >> For reference, the hardware is like DBE62, with the following >> differences: >> >> * Instead of 64MB NAND flash it has a CompactFlash slot >> > > Nice. That way the hardware remains competitive if flash prices go down > even further. > >> * Instead of 256MB soldered-on RAM, it has one SO-DIMM DDR1 slot >> > > Two comments about this. > First, the ability to use real SPD is awesome. Yeah, it's quite nice to push that particular work down to the SO-DIMM module manufacturers ;) (in addition to the obvious benefit of choice in the size, price and speed, though likely higher price if the choice happens to be similar to the one that would be soldered-on) > Second, how does this relate to the DDR1/DDR2 adapter doe GeodeLX > mentioned at > http://www.techpowerup.com/82143/AMD_Adds_DDR2_Support_for_Embedded_Geode_P… > and http://www.digitimes.com/news/a20090115VL201.html It doesn't right now, as the prototype was already at factory stage in the pipeline by the time these news cropped up. However I have already forwarded the information to our hardware team for evaluation, shortly after Bari mentioned the digitimes link on IRC, and it might or might not affect the final product. There is quite a question for the coreboot side of things here, as "BIOS" changes are told to be necessary for this. If we can't do this in coreboot, then that could be a showstopper. >> This is tested on actual hardware. > > Even better. Regards, Mart Raudsepp

3 3

coreboot /with Intel ViiV
by Pál Dorogi 25 Jan '09

25 Jan '09

Hi All, What do you think will the coreboot work with the following configuration? CPU: Core 2 Duo, Core Duo (LGA 775) NorthBridge: 946GZ GMCH (Express Chipset, Graphic & Memory Controller Hub) SouthBridge: Intel(R) 82801GDH ICH7 Digital Home (ICH7DH), Stepping: A1 (SL8UK) Possible the R01-A1? BIOS: LPC (general) or SPI (I don't know) BIOS Chip: Pm49FL004T-33JCE (4Mbit, 52KB) Super I/O chip: IT8718F Thanks in advance for your help. Cheers, Pal Pall

1 0

stack sizes in v2
by Carl-Daniel Hailfinger 25 Jan '09

25 Jan '09

Hi, Stefan pointed out that we only have 8 kB stack on most v2 boards. AFAICS that limitation is only present in RAM code, whereas CAR code has at least 16 kB. That's backwards and I didn't find any reason for it. LZMA code uses ~16 kB stack for decompression, so if the LZMA decompression runs with a small stack, we smash everything in that area. Two questions: - Do we really only have 8 kB stack? - Any reason not to increase this to 64 kB or so since RAM is plentiful? Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[PATCH] Remove reset in SB600 SATA speed fall down
by Dan Lykowski 25 Jan '09

25 Jan '09

I discovered I didn't need to do the reset when falling down to 1.5g. So here is a patch that simplifies it. Signed-off-by: Dan Lykowski<lykowdk(a)gmail.com>

2 1

← Newer
1
...
8
9
10
11
12
13
14
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot January 2009