* Copying of files from other mainboards as a starting point:
amd/db800/Makefile
artecgroup/dbe62/cmos.layout
artecgroup/dbe62/dts
amd/db800/initram.c
artecgroup/dbe61/irq_tables.h
artecgroup/dbe62/stage1
* Kconfig integration. Behind CONFIG_EXPERIMENTAL for now, as the board is not in the market yet.
Signed-off-by: Mart Raudsepp <mart.raudsepp(a)artecdesign.ee>
---
mainboard/artecgroup/Kconfig | 16 ++++
These should be done with a proper "svn copy" from the files referenced above in commit log:
mainboard/artecgroup/dbe63/Makefile | 34 +++++++++
mainboard/artecgroup/dbe63/cmos.layout | 74 +++++++++++++++++++
mainboard/artecgroup/dbe63/dts | 70 ++++++++++++++++++
mainboard/artecgroup/dbe63/initram.c | 118 +++++++++++++++++++++++++++++++
mainboard/artecgroup/dbe63/irq_tables.h | 66 +++++++++++++++++
mainboard/artecgroup/dbe63/stage1.c | 71 ++++++++++++++++++
7 files changed, 449 insertions(+), 0 deletions(-)
create mode 100644 mainboard/artecgroup/dbe63/Makefile
create mode 100644 mainboard/artecgroup/dbe63/cmos.layout
create mode 100644 mainboard/artecgroup/dbe63/dts
create mode 100644 mainboard/artecgroup/dbe63/initram.c
create mode 100644 mainboard/artecgroup/dbe63/irq_tables.h
create mode 100644 mainboard/artecgroup/dbe63/stage1.c
diff --git a/mainboard/artecgroup/Kconfig b/mainboard/artecgroup/Kconfig
index 567e1bd..fe7acea 100644
--- a/mainboard/artecgroup/Kconfig
+++ b/mainboard/artecgroup/Kconfig
@@ -43,6 +43,17 @@ config BOARD_ARTECGROUP_DBE62
help
Artec Group DBE62 ThinCan.
+config BOARD_ARTECGROUP_DBE63
+ bool "DBE63"
+ select ARCH_X86
+ select CPU_AMD_GEODELX
+ select NORTHBRIDGE_AMD_GEODELX
+ select SOUTHBRIDGE_AMD_CS5536
+ select PIRQ_TABLE
+ depends EXPERIMENTAL
+ help
+ Artec Group DBE63 ThinCan.
+
endchoice
config MAINBOARD_DIR
@@ -54,3 +65,8 @@ config MAINBOARD_DIR
string
default artecgroup/dbe62
depends BOARD_ARTECGROUP_DBE62
+
+config MAINBOARD_DIR
+ string
+ default artecgroup/dbe63
+ depends BOARD_ARTECGROUP_DBE63
diff --git a/mainboard/artecgroup/dbe63/Makefile b/mainboard/artecgroup/dbe63/Makefile
new file mode 100644
index 0000000..a8bd1db
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/Makefile
@@ -0,0 +1,34 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2006-2007 coresystems GmbH
+## (Written by Stefan Reinauer <stepan(a)coresystems.de> for coresystems GmbH)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+STAGE0_MAINBOARD_SRC := $(src)/mainboard/$(MAINBOARDDIR)/stage1.c
+
+INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \
+ $(src)/northbridge/amd/geodelx/raminit.c \
+ $(src)/southbridge/amd/cs5536/smbus_initram.c \
+ $(src)/arch/x86/geodelx/geodelx.c
+
+STAGE2_MAINBOARD_SRC =
+
+$(obj)/coreboot.vpd:
+ $(Q)printf " BUILD DUMMY VPD\n"
+ $(Q)dd if=/dev/zero of=$(obj)/coreboot.vpd bs=256 count=1 $(SILENT)
+
diff --git a/mainboard/artecgroup/dbe63/cmos.layout b/mainboard/artecgroup/dbe63/cmos.layout
new file mode 100644
index 0000000..5ba4c03
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/cmos.layout
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+1008 16 h 0 check_sum
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/mainboard/artecgroup/dbe63/dts b/mainboard/artecgroup/dbe63/dts
new file mode 100644
index 0000000..8089e79
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/dts
@@ -0,0 +1,70 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Ronald G. Minnich <rminnich(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/{
+ mainboard_vendor = "Artec";
+ mainboard_name = "DBE62";
+ cpus { };
+ apic@0 {
+ /config/("northbridge/amd/geodelx/apic");
+ };
+ domain@0 {
+ /config/("northbridge/amd/geodelx/domain");
+ pci@1,0 {
+ /config/("northbridge/amd/geodelx/pci");
+ /* Video RAM has to be in 2MB chunks. */
+ geode_video_mb = "16";
+ };
+ pci@1,1 {
+ /* This is the graphics device, but since the memory
+ * controller needs to know geode_video_mb, the
+ * phase2_init is done there. The rest are default ops.
+ */
+ };
+ pci@1,2 { /* AES */
+ };
+ pci@f,0 {
+ /config/("southbridge/amd/cs5536/dts");
+ /* Interrupt enables for LPC bus.
+ * Each bit is an IRQ 0-15. */
+ lpc_serirq_enable = "0x00001002";
+ /* LPC IRQ polarity. Each bit is an IRQ 0-15. */
+ lpc_serirq_polarity = "0x0000EFFD";
+ /* 0:continuous 1:quiet */
+ lpc_serirq_mode = "1";
+ /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none.
+ * See virtual PIC spec. */
+ enable_gpio_int_route = "0x0D0C0700";
+ /* 0:IDE; 1:FLASH on CS0, 2:FLASH on CS1, 3:FLASH on CS2, 4:FLASH on CS3. */
+ enable_ide_nand_flash = "2";
+ /* we use com2 since that is on the dongle */
+ com2_enable = "1";
+ /* Set com2 address to be COM1 */
+ com2_address = "0x3f8";
+ /* Set com2 IRQ to be what is usually COM1 */
+ com2_irq = "4";
+ /* USB Port Power Handling setting. */
+ pph = "0xf5";
+ };
+ pci@f,1 {
+ /config/("southbridge/amd/cs5536/nand");
+ };
+ };
+};
diff --git a/mainboard/artecgroup/dbe63/initram.c b/mainboard/artecgroup/dbe63/initram.c
new file mode 100644
index 0000000..34f3308
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/initram.c
@@ -0,0 +1,118 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define _MAINOBJECT
+
+#include <types.h>
+#include <lib.h>
+#include <console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <string.h>
+#include <msr.h>
+#include <io.h>
+#include <amd_geodelx.h>
+#include <northbridge/amd/geodelx/raminit.h>
+
+/* #include <device/smbus.h>
+ * TODO: figure out how smbus functions should be done. See smbus_ops.c
+ */
+extern int smbus_read_byte(u16 device, u8 address);
+
+#define MANUALCONF 0 /* Do automatic strapped PLL config */
+#define PLLMSRHI 0x00001490 /* manual settings for the PLL */
+#define PLLMSRLO 0x02000030
+#define DIMM0 ((u8) 0xA0)
+#define DIMM1 ((u8) 0xA2)
+
+/**
+ * Read a byte from the SPD.
+ *
+ * For this board, that is really just saying 'read a byte from SMBus'.
+ * So we use smbus_read_byte(). Nota Bene: leave this here as a function
+ * rather than a #define in an obscure location. This function is called
+ * only a few dozen times, and it's not performance critical.
+ *
+ * @param device The device.
+ * @param address The address.
+ * @return The data from the SMBus packet area or an error of 0xff (i.e. -1).
+ */
+u8 spd_read_byte(u16 device, u8 address)
+{
+ u8 spdbyte;
+
+ printk(BIOS_DEBUG, "spd_read_byte dev %04x\n", device);
+
+ spdbyte = smbus_read_byte(device, address);
+
+ printk(BIOS_DEBUG, " addr %02x returns %02x\n", address, spdbyte);
+
+ return spdbyte;
+}
+
+/**
+ * Placeholder in case we ever need it. Since this file is a
+ * template for other motherboards, we want this here and we want the
+ * call in the right place.
+ */
+
+static void mb_gpio_init(void)
+{
+ /* Early mainboard specific GPIO setup */
+}
+
+/**
+ * main for initram for the AMD DB800 development platform.
+ * It might seem that you could somehow do these functions in, e.g., the cpu
+ * code, but the order of operations and what those operations are is VERY
+ * strongly mainboard dependent. It's best to leave it in the mainboard code.
+ */
+int main(void)
+{
+ printk(BIOS_DEBUG, "Hi there from initram (stage1) main!\n");
+ post_code(POST_START_OF_MAIN);
+
+ system_preinit();
+ printk(BIOS_DEBUG, "done preinit\n");
+
+ mb_gpio_init();
+ printk(BIOS_DEBUG, "done gpio init\n");
+
+ pll_reset(MANUALCONF, PLLMSRHI, PLLMSRLO);
+ printk(BIOS_DEBUG, "done pll reset\n");
+
+ cpu_reg_init(0, DIMM0, DIMM1, DRAM_UNTERMINATED);
+ printk(BIOS_DEBUG, "done cpu reg init\n");
+
+ sdram_set_registers();
+ printk(BIOS_DEBUG, "done sdram set registers\n");
+
+ sdram_set_spd_registers(DIMM0, DIMM1);
+ printk(BIOS_DEBUG, "done sdram set spd registers\n");
+
+ sdram_enable(DIMM0, DIMM1);
+ printk(BIOS_DEBUG, "done sdram enable\n");
+
+ /* Check low memory */
+ /*ram_check(0x00000000, 640*1024); */
+
+ printk(BIOS_DEBUG, "stage1 returns\n");
+ return 0;
+}
diff --git a/mainboard/artecgroup/dbe63/irq_tables.h b/mainboard/artecgroup/dbe63/irq_tables.h
new file mode 100644
index 0000000..4649ef0
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/irq_tables.h
@@ -0,0 +1,66 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright (C) 2007 Advanced Micro Devices, Inc.
+* Copyright (C) 2008 Artec Design LLC.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <pirq_routing.h>
+
+/* Number of slots and devices in the PIR table */
+#define IRQ_SLOT_COUNT 3
+
+/* Platform IRQs */
+#define PIRQA 11
+#define PIRQB 10
+#define PIRQC 9
+#define PIRQD 5
+
+/* Map */
+#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
+#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
+#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
+#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
+
+/* Link */
+#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
+#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
+#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
+#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32 + 16 * IRQ_SLOT_COUNT, /* Max. number of devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
+ 0x00, /* IRQs devoted exclusively to PCI usage */
+ 0x1022, /* Vendor */
+ 0x208f, /* Device */
+ 0, /* Crap (miniport) */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
+ 0xf8, /* Checksum */
+ {
+ /* If you change the number of entries, change IRQ_SLOT_COUNT above! */
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ // Geode GX3 Host Bridge and VGA Graphics
+ {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
+ // Geode CS5535/CS5536 IO Companion: USB controllers, IDE, Audio.
+ {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0},
+ // Realtek RTL8100/8139 Network Controller
+ {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
+ }
+};
diff --git a/mainboard/artecgroup/dbe63/stage1.c b/mainboard/artecgroup/dbe63/stage1.c
new file mode 100644
index 0000000..46864be
--- /dev/null
+++ b/mainboard/artecgroup/dbe63/stage1.c
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Ronald G. Minnich <rminnich(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <lib.h>
+#include <console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <string.h>
+#include <msr.h>
+#include <io.h>
+#include <amd_geodelx.h>
+#include <southbridge/amd/cs5536/cs5536.h>
+#include <northbridge/amd/geodelx/raminit.h>
+#include <arch/x86/msr.h>
+
+static const struct msrinit dbe62_msr[] = {
+ {.msrnum = 0x10000020, {.lo = 0x00fff80, .hi = 0x20000000}},
+ {.msrnum = 0x10000021, {.lo = 0x80fffe0, .hi = 0x20000000}},
+ {.msrnum = 0x40000020, {.lo = 0x00fff80, .hi = 0x20000000}},
+ {.msrnum = 0x40000021, {.lo = 0x80fffe0, .hi = 0x20000000}},
+};
+
+static void dbe62_msr_init(void)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(dbe62_msr); i++)
+ wrmsr(dbe62_msr[i].msrnum, dbe62_msr[i].msr);
+}
+
+void hardware_stage1(void)
+{
+ post_code(POST_START_OF_MAIN);
+
+ dbe62_msr_init();
+
+ cs5536_stage1();
+
+ /*
+ * NOTE: Must do this AFTER the early_setup! It is counting on some
+ * early MSR setup for the CS5536.
+ */
+ cs5536_setup_onchipuart(2);
+
+ /* Set up 4MB mode for Artec LPC Dongle (this should be a no-op when not booting from the dongle) */
+ outb(0xf4,0x88);
+}
+
+void mainboard_pre_payload(void)
+{
+ geode_pre_payload();
+ banner(BIOS_DEBUG, "mainboard_pre_payload: done");
+}
--
1.6.0.4
