coreboot May 2008

coreboot@coreboot.org

79 participants
387 discussions

Booting Geode LX processor autonomously
by llandre 21 May '08

21 May '08

I'm working with the LPC dongle by Artec to emulate boot flash. It works fine when controlling the processor via JTAG. That is when we debug the boot code under the JTAG control everything is ok (irq13=1 to stop the processor boot). When I disconnect the JTAG debugger and set irq13 to 0 to let the processor to boot from the LPC dongle flash, it does not boot. Do I need to perform other operations to let it boot autonomously? TIA, llandre DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&d2(a)dave-tech.it

3 4

buildrom
by qchwu 21 May '08

21 May '08

During the buildrom,the step of "make" can not go on.the wrong message is following: ---------------------------------------------- [root@localhost buildrom-devel]# make menuconfig # # using defaults found in .config # .config:24:warning: symbol value '' invalid for COREBOOT_V3_ROM_SIZE .config:95:warning: symbol value '' invalid for LAB_PAUSE *** End of buildrom configuration. *** Execute 'make' to build buildrom or try 'make help'. [root@localhost buildrom-devel]# make make: *** No rule to make target `|', needed by `/bios/buildrom/buildrom-devel/work/lzma/stamps/.unpacked'. Stop. [root@localhost buildrom-devel]# ----------------------------------------------------- My gcc version is 4.2.2.The MAKE version is 3.79.1.linux kernel is 2.4.20. The system base on 32-bit. I use "svn co svn://coreboot.org/buildrom" to get the source.and then config amd make it,the make was faiulre. How can I let the make complete? thanks. chenghu qing

3 4

r3341 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "stuge" checked in revision 3341 to the coreboot source repository and caused the following changes: Change Log: Myles reported SST49LF080A status -> TESTED_PREW Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Peter Stuge <peter(a)stuge.se> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3341&device=epia-cn&vendor… If something broke during this checkin please be a pain in stuge's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

r3341 - trunk/util/flashrom
by svn＠coreboot.org 21 May '08

21 May '08

Author: stuge Date: 2008-05-21 09:10:15 +0200 (Wed, 21 May 2008) New Revision: 3341 Modified: trunk/util/flashrom/flashchips.c Log: Myles reported SST49LF080A status -> TESTED_PREW Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/util/flashrom/flashchips.c =================================================================== --- trunk/util/flashrom/flashchips.c 2008-05-20 20:16:34 UTC (rev 3340) +++ trunk/util/flashrom/flashchips.c 2008-05-21 07:10:15 UTC (rev 3341) @@ -93,7 +93,7 @@ {"SST", "SST49LF020A", SST_ID, SST_49LF020A, 256, 16 * 1024, TEST_UNTESTED, probe_jedec, erase_49lf040, write_49lf040}, {"SST", "SST49LF040", SST_ID, SST_49LF040, 512, 4096, TEST_UNTESTED, probe_jedec, erase_49lf040, write_49lf040}, {"SST", "SST49LF040B", SST_ID, SST_49LF040B, 512, 64 * 1024, TEST_UNTESTED, probe_sst_fwhub, erase_sst_fwhub, write_sst_fwhub}, - {"SST", "SST49LF080A", SST_ID, SST_49LF080A, 1024, 4096, TEST_UNTESTED, probe_jedec, erase_49lf040, write_49lf040}, + {"SST", "SST49LF080A", SST_ID, SST_49LF080A, 1024, 4096, TEST_OK_PREW, probe_jedec, erase_49lf040, write_49lf040}, {"SST", "SST49LF160C", SST_ID, SST_49LF160C, 2048, 4 * 1024, TEST_UNTESTED, probe_49lfxxxc, erase_49lfxxxc, write_49lfxxxc}, {"ST", "M25P05-A", ST_ID, ST_M25P05A, 64, 256, TEST_UNTESTED, probe_spi_rdid, spi_chip_erase_c7, spi_chip_write, spi_chip_read}, {"ST", "M25P10-A", ST_ID, ST_M25P10A, 128, 256, TEST_UNTESTED, probe_spi_rdid, spi_chip_erase_c7, spi_chip_write, spi_chip_read},

1 0

r3340 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "jcrouse" checked in revision 3340 to the coreboot source repository and caused the following changes: Change Log: coreinfo: Use the ESC key to exit the payload Enable the ESC key to close coreinfo - useful if you are using a chooser and want to return to it. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3340&device=epia-cn&vendor… If something broke during this checkin please be a pain in jcrouse's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Barcelona Support Supermicro H8DMR-i2
by Kevin Connelly 21 May '08

21 May '08

Hi all, I noticed that there has been some work on Barcelona support. Are there any plans to implement this support into the Supermicro H8DMR-i2? Thanks, Kevin

5 8

r3339 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "jcrouse" checked in revision 3339 to the coreboot source repository and caused the following changes: Change Log: coreinfo: Fix the subwindow refresh based on the libpayload changes Changes to libpayload to fix subwindows broke coreinfo. This fixes it, and improves performance by eliminating the entire screen refresh every second. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3339&device=epia-cn&vendor… If something broke during this checkin please be a pain in jcrouse's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

r3336 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "jcrouse" checked in revision 3336 to the coreboot source repository and caused the following changes: Change Log: libpayload: Fix curses subwindows This fixes subwindows in curses so that they draw and refresh correctly. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3336&device=epia-cn&vendor… If something broke during this checkin please be a pain in jcrouse's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

5 5

r3338 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "jcrouse" checked in revision 3338 to the coreboot source repository and caused the following changes: Change Log: libpayload: Add an exec() and i386_do_exec() function Add functions for libpayload to execute other payloads in memory, and have those functions return cleanly. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3338&device=epia-cn&vendor… If something broke during this checkin please be a pain in jcrouse's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

r3337 build service
by coreboot information 21 May '08

21 May '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "jcrouse" checked in revision 3337 to the coreboot source repository and caused the following changes: Change Log: libpayload: Add larfptr function Add a function to get a pointer to the start of a LAR entry. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of via:epia-cn is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3337&device=epia-cn&vendor… If something broke during this checkin please be a pain in jcrouse's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot May 2008