coreboot March 2008

coreboot@coreboot.org

75 participants
382 discussions

by Masoud Fatollahy

Hi, Why is it problem to boot from an usb port when we are using linuxbios and filo. as I can see all usb code are there, what is missing? Thanks, /Masoud

9 years, 12 months

[LinuxBIOS] Add initial support for intel i855gme northbridge

by Jon Dufresne

Add initial support for i855gme. This is a work in progress and I don't expect it to work on all boards, or even any besides mine. This is based heavily on i855pm. Signed off by Jon Dufresne <jon.dufresne(a)gmail.com>

11 years, 6 months

[LinuxBIOS] A8N5X port

by Robert Millan

This patch includes config files for the asus/a8n5x port. It is the same as asus/a8n_e with a different pnp layout, so I used #include's whenever possible. System boots and is usable with usb keyboard. works: - serial port - vga (old pci card) - memtest86+ succeeds, but only with Rudolf's patch for unbuffered dimms in K8. Otherwise you get spurious memory corruption. - ide disk - usb doesn't: - ps/2 keyboard - onboard ethernet - vga pci-e card (??) - any other pci card I tried wasn't tested: - sata - game port - onboard audio (not supported by alsa anyway) - ps/2 mouse -- Robert Millan <GPLv2> I know my rights; I want my phone call! <DRM> What use is a phone call, if you are unable to speak? (as seen on /.)

11 years, 8 months

LZMA magic number

by Myles Watson

Is there a magic number for LZMA? Should there be? I accidentally used an uncompressed payload with v2 when it expected a compressed payload, and it gave me the message: Decoder scratchpad too small!! Decoding error = 1 I think it would be nicer to have an error like: Payload not compressed with lzma! Myles

11 years, 10 months

[v3] VT8237R support

by Corey Osgood

See attached. Not perfect, but enough to get started with.

11 years, 11 months

[PATCH] v3: missing 640k-1024k mem hole for i440bxemulation

by Carl-Daniel Hailfinger

i440bxemulation is missing the 640k-1024k mem hole. geodelx has the hole. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: LinuxBIOSv3-stuff/northbridge/intel/i440bxemulation/i440bx.c =================================================================== --- LinuxBIOSv3-stuff/northbridge/intel/i440bxemulation/i440bx.c (Revision 644) +++ LinuxBIOSv3-stuff/northbridge/intel/i440bxemulation/i440bx.c (Arbeitskopie) @@ -59,7 +59,10 @@ mc_dev = dev->link[0].children; if (mc_dev) { idx = 10; - ram_resource(dev, idx++, 0, tolmk); + /* 0 .. 640 KB */ + ram_resource(dev, idx++, 0, 640); + /* 1 MB .. (Systop - 1 MB) (in KB) */ + ram_resource(dev, idx++, 1024, tolmk - 1024); } phase4_assign_resources(&dev->link[0]); } -- http://www.hailfinger.org/

11 years, 11 months

[PATCH] v3: convert stage2 and initram makefile rules from object to source files

by Carl-Daniel Hailfinger

Convert stage2 and initram makefile rules from object to source files. This creates a clearer distinction between source files in the source tree we want to have compiled and indirectly created object/source files in the object tree. It also will make enable us to move to whole-program optimization/compilation which should yield substantial size savings. Then again, we may be able to do that without the makefile conversion as well. This is a RFC, not to be applied immediately. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: LinuxBIOSv3-makefilerewrite/southbridge/amd/cs5536/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/southbridge/amd/cs5536/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/southbridge/amd/cs5536/Makefile (Arbeitskopie) @@ -21,7 +21,7 @@ ifeq ($(CONFIG_SOUTHBRIDGE_AMD_CS5536),y) -STAGE2_CHIPSET_OBJ += $(obj)/southbridge/amd/cs5536/cs5536.o +STAGE2_CHIPSET_SRC += $(src)/southbridge/amd/cs5536/cs5536.c STAGE0_CHIPSET_OBJ += $(obj)/southbridge/amd/cs5536/stage1.o Index: LinuxBIOSv3-makefilerewrite/southbridge/intel/i82371eb/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/southbridge/intel/i82371eb/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/southbridge/intel/i82371eb/Makefile (Arbeitskopie) @@ -20,6 +20,6 @@ ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_I82371EB),y) -STAGE2_CHIPSET_OBJ += $(obj)/southbridge/intel/i82371eb/i82371eb.o +STAGE2_CHIPSET_SRC += $(src)/southbridge/intel/i82371eb/i82371eb.c endif Index: LinuxBIOSv3-makefilerewrite/superio/winbond/w83627hf/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/superio/winbond/w83627hf/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/superio/winbond/w83627hf/Makefile (Arbeitskopie) @@ -25,6 +25,6 @@ STAGE0_CHIPSET_OBJ += $(obj)/device/pnp_raw.o # Always add to variables, as there could be more than one Super I/O. -STAGE2_CHIPSET_OBJ += $(obj)/superio/winbond/w83627hf/superio.o +STAGE2_CHIPSET_SRC += $(src)/superio/winbond/w83627hf/superio.c endif Index: LinuxBIOSv3-makefilerewrite/superio/fintek/f71805f/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/superio/fintek/f71805f/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/superio/fintek/f71805f/Makefile (Arbeitskopie) @@ -24,6 +24,6 @@ STAGE0_CHIPSET_OBJ += $(obj)/device/pnp_raw.o # Always add to variables, as there could be more than one Super I/O. -STAGE2_CHIPSET_OBJ += $(obj)/superio/fintek/f71805f/superio.o +STAGE2_CHIPSET_SRC += $(src)/superio/fintek/f71805f/superio.c endif Index: LinuxBIOSv3-makefilerewrite/mainboard/adl/msm800sev/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/adl/msm800sev/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/adl/msm800sev/Makefile (Arbeitskopie) @@ -21,12 +21,12 @@ STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/northbridge/amd/geodelx/raminit.c \ $(src)/southbridge/amd/cs5536/smbus_initram.c \ $(src)/arch/x86/geodelx/geodelx.c -STAGE2_MAINBOARD_OBJ = +STAGE2_MAINBOARD_SRC = $(obj)/coreboot.vpd: $(Q)printf " BUILD DUMMY VPD\n" Index: LinuxBIOSv3-makefilerewrite/mainboard/amd/norwich/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/amd/norwich/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/amd/norwich/Makefile (Arbeitskopie) @@ -21,12 +21,12 @@ STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/northbridge/amd/geodelx/raminit.c \ $(src)/southbridge/amd/cs5536/smbus_initram.c \ $(src)/arch/x86/geodelx/geodelx.c -STAGE2_MAINBOARD_OBJ = irq_tables.o +STAGE2_MAINBOARD_SRC = irq_tables.c $(obj)/coreboot.vpd: $(Q)printf " BUILD DUMMY VPD\n" Index: LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe61/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe61/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe61/Makefile (Arbeitskopie) @@ -21,11 +21,11 @@ STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/northbridge/amd/geodelx/raminit.c \ $(src)/arch/x86/geodelx/geodelx.c -STAGE2_MAINBOARD_OBJ = +STAGE2_MAINBOARD_SRC = $(obj)/coreboot.vpd: $(Q)printf " BUILD DUMMY VPD\n" Index: LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe62/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe62/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/artecgroup/dbe62/Makefile (Arbeitskopie) @@ -21,11 +21,11 @@ STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/northbridge/amd/geodelx/raminit.c \ $(src)/arch/x86/geodelx/geodelx.c -STAGE2_MAINBOARD_OBJ = irq_tables.o +STAGE2_MAINBOARD_SRC = irq_tables.c $(obj)/coreboot.vpd: $(Q)printf " BUILD DUMMY VPD\n" Index: LinuxBIOSv3-makefilerewrite/mainboard/pcengines/alix1c/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/pcengines/alix1c/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/pcengines/alix1c/Makefile (Arbeitskopie) @@ -21,11 +21,11 @@ STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/northbridge/amd/geodelx/raminit.c \ $(src)/arch/x86/geodelx/geodelx.c -STAGE2_MAINBOARD_OBJ = irq_tables.o +STAGE2_MAINBOARD_SRC = irq_tables.c $(obj)/coreboot.vpd: $(Q)printf " BUILD DUMMY VPD\n" Index: LinuxBIOSv3-makefilerewrite/mainboard/emulation/qemu-x86/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/mainboard/emulation/qemu-x86/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/mainboard/emulation/qemu-x86/Makefile (Arbeitskopie) @@ -28,10 +28,10 @@ # directory and is built from what was auto.c in v2. # -INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ $(src)/mainboard/$(MAINBOARDDIR)/initram_printktest.c -STAGE2_MAINBOARD_OBJ = vga.o +STAGE2_MAINBOARD_SRC = vga.c # # VPD or SIP ROM or... how does NVIDIA call it? Index: LinuxBIOSv3-makefilerewrite/device/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/device/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/device/Makefile (Arbeitskopie) @@ -24,6 +24,6 @@ $(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n" $(Q)$(CC) $(INITCFLAGS) -c $< -o $@ -STAGE2_DEVICE_OBJ = device.o device_util.o root_device.o \ - pci_device.o pci_ops.o pci_rom.o pnp_device.o pnp_raw.o +STAGE2_DEVICE_SRC = device.c device_util.c root_device.c \ + pci_device.c pci_ops.c pci_rom.c pnp_device.c pnp_raw.c Index: LinuxBIOSv3-makefilerewrite/northbridge/amd/geodelx/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/northbridge/amd/geodelx/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/northbridge/amd/geodelx/Makefile (Arbeitskopie) @@ -21,9 +21,9 @@ ifeq ($(CONFIG_NORTHBRIDGE_AMD_GEODELX),y) -STAGE2_CHIPSET_OBJ += $(obj)/northbridge/amd/geodelx/geodelx.o \ - $(obj)/northbridge/amd/geodelx/vsmsetup.o \ - $(obj)/util/x86emu/vm86_gdt.o \ - $(obj)/northbridge/amd/geodelx/grphinit.o +STAGE2_CHIPSET_SRC += $(src)/northbridge/amd/geodelx/geodelx.c \ + $(src)/northbridge/amd/geodelx/vsmsetup.c \ + $(src)/util/x86emu/vm86_gdt.c \ + $(src)/northbridge/amd/geodelx/grphinit.c endif Index: LinuxBIOSv3-makefilerewrite/northbridge/intel/i440bxemulation/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/northbridge/intel/i440bxemulation/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/northbridge/intel/i440bxemulation/Makefile (Arbeitskopie) @@ -21,6 +21,6 @@ ifeq ($(CONFIG_NORTHBRIDGE_INTEL_I440BXEMULATION),y) -STAGE2_CHIPSET_OBJ += $(obj)/northbridge/intel/i440bxemulation/i440bx.o +STAGE2_CHIPSET_SRC += $(src)/northbridge/intel/i440bxemulation/i440bx.c endif Index: LinuxBIOSv3-makefilerewrite/arch/x86/Makefile =================================================================== --- LinuxBIOSv3-makefilerewrite/arch/x86/Makefile (Revision 626) +++ LinuxBIOSv3-makefilerewrite/arch/x86/Makefile (Arbeitskopie) @@ -179,27 +179,32 @@ # TODO: This should be compressed with the default compressor. # -STAGE2_LIB_OBJ = stage2.o clog2.o mem.o tables.o delay.o \ - compute_ip_checksum.o string.o +STAGE2_LIB_SRC = stage2.c clog2.c mem.c tables.c delay.c \ + compute_ip_checksum.c string.c -STAGE2_ARCH_X86_OBJ = archtables.o coreboot_table.o udelay_io.o -STAGE2_ARCH_X86_OBJ += pci_ops_auto.o pci_ops_conf1.o pci_ops_conf2.o -STAGE2_ARCH_X86_OBJ += keyboard.o i8259.o isa-dma.o +STAGE2_ARCH_X86_SRC = archtables.c coreboot_table.c udelay_io.c +STAGE2_ARCH_X86_SRC += pci_ops_auto.c pci_ops_conf1.c pci_ops_conf2.c +STAGE2_ARCH_X86_SRC += keyboard.c i8259.c isa-dma.c ifeq ($(CONFIG_PIRQ_TABLE),y) -STAGE2_ARCH_X86_OBJ += pirq_routing.o +STAGE2_ARCH_X86_SRC += pirq_routing.c endif STAGE2_DYNAMIC_OBJ = statictree.o -STAGE2_OBJ := $(patsubst %,$(obj)/lib/%,$(STAGE2_LIB_OBJ)) \ - $(patsubst %,$(obj)/arch/x86/%,$(STAGE2_ARCH_X86_OBJ)) \ - $(patsubst %,$(obj)/device/%,$(STAGE2_DEVICE_OBJ)) \ - $(patsubst %,$(obj)/mainboard/$(MAINBOARDDIR)/%,$(STAGE2_MAINBOARD_OBJ)) \ - $(patsubst %,$(obj)/mainboard/$(MAINBOARDDIR)/%,$(STAGE2_DYNAMIC_OBJ)) +STAGE2_SRC := $(patsubst %,$(src)/lib/%,$(STAGE2_LIB_SRC)) \ + $(patsubst %,$(src)/arch/x86/%,$(STAGE2_ARCH_X86_SRC)) \ + $(patsubst %,$(src)/device/%,$(STAGE2_DEVICE_SRC)) \ + $(patsubst %,$(src)/mainboard/$(MAINBOARDDIR)/%,$(STAGE2_MAINBOARD_SRC)) -STAGE2_OBJ += $(STAGE2_CHIPSET_OBJ) +STAGE2_SRC += $(STAGE2_CHIPSET_SRC) +STAGE2_OBJ := $(patsubst $(src)/%.c,$(obj)/%.o,$(STAGE2_SRC)) + +# This one is special, but only due to slightly incorrect rules and dependencies. +# Don't change the dependencies for now. +STAGE2_OBJ += $(patsubst %,$(obj)/mainboard/$(MAINBOARDDIR)/%,$(STAGE2_DYNAMIC_OBJ)) + ifeq ($(CONFIG_PCI_OPTION_ROM_RUN),y) ifeq ($(CONFIG_PCI_OPTION_ROM_RUN_X86EMU),y) # x86emu wants libgcc @@ -215,7 +220,7 @@ STAGE2_OBJ_NEEDED = $(filter-out $(STAGE0_OBJ), $(STAGE2_OBJ)) -$(obj)/coreboot.stage2 $(obj)/coreboot.stage2.map: $(obj)/stage0.o $(STAGE2_OBJ_NEEDED) +$(obj)/coreboot.stage2 $(obj)/coreboot.stage2.map: $(obj)/stage0.o $(STAGE2_OBJ_NEEDED) $(STAGE2_SRC) $(Q)# leave a .o with full symbols in it for debugging. $(Q)printf " LD $(subst $(shell pwd)/,,$(@))\n" $(Q)$(LD) -R $(obj)/stage0.o -Ttext 0x2000 --entry=stage2 \ @@ -249,9 +254,9 @@ $(Q)printf " AS $(subst $(shell pwd)/,,$(@))\n" $(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@ -$(obj)/coreboot.initram $(obj)/coreboot.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_OBJ) +$(obj)/coreboot.initram $(obj)/coreboot.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_SRC) $(Q)printf " CC $(subst $(shell pwd)/,,$(@)) (XIP)\n" - $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c -combine $(INITRAM_OBJ) -o $(obj)/coreboot.initram_partiallylinked.o + $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c -combine $(INITRAM_SRC) -o $(obj)/coreboot.initram_partiallylinked.o $(Q)# initram links against stage0 $(Q)printf " LD $(subst $(shell pwd)/,,$(@))\n" $(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \ -- http://www.hailfinger.org/

12 years

some thoughts on dts vs. Kconfig vs. makefiles vs. C code

by ron minnich

I have no idea if this helps. But there's been discussion of "DRAM settings in DTS" and "where does CARBASE go" and so on, so I think we need to try to document some rules. Here is a first cut. thanks ron

12 years, 1 month

flashrom verify fails, CK804, MCP55

by Tiago Marques

On two boards, one MCP55 based and another CK804, if I flash the proprietary BIOS with: flasrom -wv bios.bin Verification fails and if I try to boot, it doesn't. Have to flash the BIOS in another board based on K8T890 that I have. In that one all works fine, with both BIOS chips I have - one winbond and a PMC. Haven't tried flashing coreboot due to lack of support. Since the chipsets are support, this isn't supposed to happen, right? Best regards, Tiago Marques On 1/27/08, Stefan Reinauer <stepan(a)coresystems.de> wrote: > * Tiago Marques <tiagomnm(a)gmail.com> [080127 16:21]: > > Hi. > > Both failed, tried with two different BIOS chips. > > Flashing with AWDFlash works fine though. > > Had to flash it again in a VIA K8T890 board, which works flawlessly. > > Any ideas, fix? > > What's the problem? > > -- > coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. > Tel.: +49 761 7668825 • Fax: +49 761 7664613 > Email: info(a)coresystems.de • http://www.coresystems.de/ > Registergericht: Amtsgericht Freiburg • HRB 7656 > Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866 >

12 years, 1 month

Laptop with PN800 chipset

by yannis le gal

Hi all ! I'd like to try linux bios because my laptop Medion MIM2080 have a lot of problems : windows freeze i had to use noapic nolapic to install ubuntu .. no irq assigned to the wifi (solved with a custom dsdt) when i set video ram to 16 mo , cpu frequency change don't work So the BIOS ,ACPI , DSDT are buggy ! Thanks for any help ;) Yannis. -------------------lspci----------------------- 00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:06.0 Network controller: Intel Corporation PRO/Wireless 2915ABG Network Connection (rev 05) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 02) -------------------------------- flashrom------------------------------ Calibrating delay loop... OK. No coreboot table found. Found chipset "VT8235", enabling flash write... OK. SST49LF004A/B found at physical address 0xfff80000. Flash part is SST49LF004A/B (512 KB). No operations were specified. ----------- dmesg ------------------- [ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Mon Mar 10 15:32:00 UTC 2008 (Ubuntu 2.6.24-12.20-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 114671 [ 0.000000] HighMem 114671 -> 114671 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 114671 [ 0.000000] On node 0 totalpages: 114671 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 863 pages used for memmap [ 0.000000] Normal zone: 109712 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0 [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 1BFFBE80, 0030 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: FACP 1BFFFB10, 0074 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 1BFFC400, 3709 (r1 INSYDE PN800 1000 INTL 2002036) [ 0.000000] ACPI: FACS 1BFFFFC0, 0040 [ 0.000000] ACPI: APIC 1BFFFBA0, 005A (r1 INSYDE APIC_000 30303030 0000 10200) [ 0.000000] ACPI: SSDT 1BFFBEB0, 03F2 (r1 PmRef Cpu0Ist 3000 INTL 20030522) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113776 [ 0.000000] Kernel command line: root=UUID=f91ec9c5-e9f7-4b6b-a95b-e9a9fd7648e8 ro quiet splash locale=fr_FR [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1791.292 MHz processor. [ 4.989980] Console: colour VGA+ 80x25 [ 4.989986] console [tty0] enabled [ 4.990281] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.990564] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 5.003212] Memory: 442772k/458684k available (2164k kernel code, 15340k reserved, 1007k data, 364k init, 0k highmem) [ 5.003221] virtual kernel memory layout: [ 5.003222] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 5.003223] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 5.003225] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) [ 5.003226] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB) [ 5.003227] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 5.003228] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 5.003229] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 5.003233] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 5.003283] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 5.083223] Calibrating delay using timer specific routine.. 3586.88 BogoMIPS (lpj=7173776) [ 5.083259] Security Framework initialized [ 5.083271] SELinux: Disabled at boot. [ 5.083290] AppArmor: AppArmor initialized [ 5.083295] Failure registering capabilities with primary security module. [ 5.083304] Mount-cache hash table entries: 512 [ 5.083470] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 5.083486] CPU: L1 I cache: 32K, L1 D cache: 32K [ 5.083489] CPU: L2 cache: 2048K [ 5.083493] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 5.083502] Compat vDSO mapped to ffffe000. [ 5.083518] Checking 'hlt' instruction... OK. [ 5.099679] SMP alternatives: switching to UP code [ 5.101757] Freeing SMP alternatives: 11k freed [ 5.101877] Early unpacking initramfs... done [ 5.439518] ACPI: Core revision 20070126 [ 5.439593] ACPI: Looking for DSDT in initramfs... successfully read 12498 bytes from /DSDT.aml. [ 5.439631] ACPI: Table DSDT replaced by host OS [ 5.439635] ACPI: DSDT 00000000, 30D2 (r1 INSYDE PN800 1000 INTL 20061109) [ 5.439640] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06 [ 5.451523] Total of 1 processors activated (3586.88 BogoMIPS). [ 5.452235] ENABLING IO-APIC IRQs [ 5.452561] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 5.598699] Brought up 1 CPUs [ 5.598758] CPU0 attaching sched-domain: [ 5.598761] domain 0: span 01 [ 5.598763] groups: 01 [ 5.598947] net_namespace: 64 bytes [ 5.598957] Booting paravirtualized kernel on bare hardware [ 5.599442] Time: 12:25:04 Date: 03/11/08 [ 5.599497] NET: Registered protocol family 16 [ 5.599690] EISA bus registered [ 5.599722] ACPI: bus type pci registered [ 5.599877] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1 [ 5.599879] PCI: Using configuration type 1 [ 5.599881] Setting up standard PCI resources [ 5.601871] ACPI: EC: Look up EC in DSDT [ 5.604517] ACPI: Interpreter enabled [ 5.604521] ACPI: (supports S0 S1 S3 S4 S5) [ 5.604538] ACPI: Using IOAPIC for interrupt routing [ 5.606124] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 5.613887] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 5.613890] ACPI: EC: driver started in interrupt mode [ 5.613927] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 5.614674] PCI quirk: region 1000-107f claimed by vt8235 PM [ 5.614678] PCI quirk: region 1400-140f claimed by vt8235 SMB [ 5.615088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.625395] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 5.625476] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 5.625554] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 5.625631] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 5.625702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 5.625774] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 5.625845] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 5.625916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 5.626012] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 5.626108] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11 [ 5.626238] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [ 5.626318] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 5.626406] Linux Plug and Play Support v0.97 (c) Adam Belay [ 5.626434] pnp: PnP ACPI init [ 5.626441] ACPI: bus type pnp registered [ 5.630514] pnp: PnP ACPI: found 9 devices [ 5.630517] ACPI: ACPI bus type pnp unregistered [ 5.630521] PnPBIOS: Disabled by ACPI PNP [ 5.630723] PCI: Using ACPI for IRQ routing [ 5.630726] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 5.642622] NET: Registered protocol family 8 [ 5.642625] NET: Registered protocol family 20 [ 5.642684] AppArmor: AppArmor Filesystem Enabled [ 5.646599] Time: tsc clocksource has been installed. [ 5.654625] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 5.654628] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 5.654631] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 5.654634] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 5.654640] system 00:07: ioport range 0x330-0x331 has been reserved [ 5.654642] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 5.654645] system 00:07: ioport range 0x1000-0x107f has been reserved [ 5.654648] system 00:07: ioport range 0x1400-0x140f has been reserved [ 5.684999] PCI: Bridge: 0000:00:01.0 [ 5.685002] IO window: c000-dfff [ 5.685007] MEM window: c0000000-cfffffff [ 5.685011] PREFETCH window: 90000000-9fffffff [ 5.685033] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 5.685044] NET: Registered protocol family 2 [ 5.722578] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 5.722762] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.722881] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 5.723013] TCP: Hash tables configured (established 16384 bind 16384) [ 5.723016] TCP reno registered [ 5.734613] checking if image is initramfs... it is [ 6.186000] Switched to high resolution mode on CPU 0 [ 6.394689] Freeing initrd memory: 7228k freed [ 6.395464] audit: initializing netlink socket (disabled) [ 6.395488] audit(1205238304.280:1): initialized [ 6.397619] VFS: Disk quotas dquot_6.5.1 [ 6.397727] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.397906] io scheduler noop registered [ 6.397909] io scheduler anticipatory registered [ 6.397911] io scheduler deadline registered [ 6.397924] io scheduler cfq registered (default) [ 6.397944] PCI: VIA PCI bridge detected. Disabling DAC. [ 6.398002] Boot video device is 0000:01:00.0 [ 6.398302] isapnp: Scanning for PnP cards... [ 6.752300] isapnp: No Plug & Play device found [ 6.778646] Real Time Clock Driver v1.12ac [ 6.778773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 6.779959] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 6.780033] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 6.780130] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.791874] i8042.c: Detected active multiplexing controller, rev 1.1. [ 6.797559] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.797564] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 6.797566] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 6.797569] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 6.797571] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 6.809263] mice: PS/2 mouse device common for all mice [ 6.809372] EISA: Probing bus 0 at eisa.0 [ 6.809380] Cannot allocate resource for EISA slot 1 [ 6.809411] EISA: Detected 0 cards. [ 6.809415] cpuidle: using governor ladder [ 6.809417] cpuidle: using governor menu [ 6.809528] NET: Registered protocol family 1 [ 6.809561] Using IPI No-Shortcut mode [ 6.809602] registered taskstats version 1 [ 6.809708] Magic number: 0:453:430 [ 6.809858] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.809869] EDD information not available. [ 6.810139] Freeing unused kernel memory: 364k freed [ 6.829207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 8.004266] fuse init (API version 7.9) [ 8.015555] allocation failed: out of vmalloc space - use vmalloc=<size> to increase size. [ 8.015562] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PDC] (Node d9c9a7c8), AE_NO_MEMORY [ 8.015806] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 8.015811] ACPI: Processor [CPU0] (supports 16 throttling states) [ 8.645709] usbcore: registered new interface driver usbfs [ 8.645738] usbcore: registered new interface driver hub [ 8.663024] usbcore: registered new device driver usb [ 8.701068] SCSI subsystem initialized [ 8.706949] USB Universal Host Controller Interface driver v3.0 [ 8.707172] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 [ 8.707176] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 [ 8.707185] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 16 [ 8.707199] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 8.707760] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 8.707795] uhci_hcd 0000:00:10.0: irq 16, io base 0x00001200 [ 8.707936] usb usb1: configuration #1 chosen from 1 choice [ 8.707963] hub 1-0:1.0: USB hub found [ 8.707968] hub 1-0:1.0: 2 ports detected [ 8.773177] libata version 3.00 loaded. [ 8.782861] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 8.811049] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 16 [ 8.811065] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 8.811093] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 8.811119] uhci_hcd 0000:00:10.1: irq 16, io base 0x00001220 [ 8.811233] usb usb2: configuration #1 chosen from 1 choice [ 8.811256] hub 2-0:1.0: USB hub found [ 8.811262] hub 2-0:1.0: 2 ports detected [ 8.914823] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 16 [ 8.914839] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 8.914865] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 8.914891] uhci_hcd 0000:00:10.2: irq 16, io base 0x00001240 [ 8.915000] usb usb3: configuration #1 chosen from 1 choice [ 8.915024] hub 3-0:1.0: USB hub found [ 8.915030] hub 3-0:1.0: 2 ports detected [ 9.018793] PCI: Enabling device 0000:00:10.3 (0000 -> 0002) [ 9.018806] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 16 [ 9.018825] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 9.018852] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 9.018898] ehci_hcd 0000:00:10.3: irq 16, io mem 0x20001000 [ 9.030534] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 9.030666] usb usb4: configuration #1 chosen from 1 choice [ 9.030691] hub 4-0:1.0: USB hub found [ 9.030698] hub 4-0:1.0: 6 ports detected [ 9.134904] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23 [ 9.134909] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23 [ 9.134918] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17 [ 9.139237] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:71:68:85, IRQ 17. [ 9.139951] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 9.140208] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 9.140248] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 9.140250] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 9.140254] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18 [ 9.140306] ACPI: PCI interrupt for device 0000:00:11.1 disabled [ 9.153717] pata_via 0000:00:11.1: version 0.3.3 [ 9.153743] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18 [ 9.155028] scsi0 : pata_via [ 9.155369] scsi1 : pata_via [ 9.157144] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 9.157148] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 9.822092] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100 [ 9.822096] ata1.00: 78242976 sectors, multi 16: LBA48 [ 9.829926] ata1.00: configured for UDMA/100 [ 9.996783] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC10 PQ: 0 ANSI: 5 [ 10.002729] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 10.003182] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 10.003186] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 10.011108] Driver 'sd' needs updating - please use bus_type methods [ 10.011203] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB) [ 10.011217] sd 0:0:0:0: [sda] Write Protect is off [ 10.011220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.011234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011285] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB) [ 10.011294] sd 0:0:0:0: [sda] Write Protect is off [ 10.011296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.011311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.011314] sda: sda1 sda2 < sda5 > [ 10.046157] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.052449] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.172407] usb 2-2: configuration #1 chosen from 1 choice [ 10.189559] usbcore: registered new interface driver hiddev [ 10.202551] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2 [ 10.213273] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:10.1-2 [ 10.213285] usbcore: registered new interface driver usbhid [ 10.213288] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 10.242830] Attempting manual resume [ 10.242835] swsusp: Resume From Partition 8:5 [ 10.242836] PM: Checking swsusp image. [ 10.243018] PM: Resume from disk failed. [ 10.291962] kjournald starting. Commit interval 5 seconds [ 10.291973] EXT3-fs: mounted filesystem with ordered data mode. [ 19.736498] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.797443] nf_conntrack version 0.5.0 (7168 buckets, 28672 max) [ 20.664586] Linux agpgart interface v0.102 [ 20.716138] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 20.725720] agpgart: AGP aperture is 128M @ 0xa0000000 [ 21.092078] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.144086] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.200090] input: Power Button (FF) as /devices/virtual/input/input3 [ 21.211884] ACPI: Power Button (FF) [PWRF] [ 21.211972] input: Lid Switch as /devices/virtual/input/input4 [ 21.215125] ACPI: Lid Switch [LID] [ 21.215187] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 21.227854] ACPI: Sleep Button (CM) [SBTN] [ 21.227948] input: Power Button (CM) as /devices/virtual/input/input6 [ 21.239835] ACPI: Power Button (CM) [PBTN] [ 21.266399] ACPI: AC Adapter [AC] (on-line) [ 21.331804] ACPI: Battery Slot [BAT0] (battery absent) [ 21.603431] ieee80211_crypt: registered algorithm 'NULL' [ 21.659368] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 21.659372] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno(a)linux.intel.com> [ 21.764818] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 21.764824] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 21.764942] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [ 21.764955] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 21.764966] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 21.807168] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 22.527416] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7 [ 22.538283] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [ 23.037073] snd: no version for "unregister_sound_special" found: kernel tainted. [ 24.024943] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 24.689931] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0 [ 24.740020] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input9 [ 25.498523] ipw2200: Detected geography ZZH (13 802.11bg channels, 4 802.11a channels) [ 25.502860] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 25.502973] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22 [ 25.502976] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 25.502985] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 25.510298] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 25.585193] irda_init() [ 25.585217] NET: Registered protocol family 23 [ 26.015022] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 26.015164] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 27.439990] lp: driver loaded but no devices found [ 27.640481] Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1 across:1461872k [ 28.272783] EXT3 FS on sda1, internal journal [ 31.522299] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 31.557367] No dock devices found. [ 32.846071] ppdev: user-space parallel port driver [ 33.398077] audit(1205238332.106:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4851 profile="/usr/sbin/cupsd" namespace="default" [ 33.526673] apm: BIOS not found. [ 75.873743] Marking TSC unstable due to: cpufreq changes. [ 75.882691] Time: acpi_pm clocksource has been installed. [ 39.250591] eth0: link down [ 39.311696] Bluetooth: Core ver 2.11 [ 39.312234] NET: Registered protocol family 31 [ 39.312236] Bluetooth: HCI device and connection manager initialized [ 39.312241] Bluetooth: HCI socket layer initialized [ 62.910349] Bluetooth: L2CAP ver 2.9 [ 62.910357] Bluetooth: L2CAP socket layer initialized [ 63.235895] Bluetooth: RFCOMM socket layer initialized [ 63.235926] Bluetooth: RFCOMM TTY layer initialized [ 63.235930] Bluetooth: RFCOMM ver 1.8 [ 38.500755] [drm] Initialized drm 1.1.0 20060810 [ 117.339835] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 117.343580] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 117.521033] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 117.521102] agpgart: Device is in legacy mode, falling back to 2.x [ 117.521123] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 117.521342] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 301.592332] NET: Registered protocol family 10 [ 301.593158] lo: Disabled Privacy Extensions [ 301.594638] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 301.595291] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 356.960096] NET: Registered protocol family 17 [ 358.419283] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 361.246183] ieee80211_crypt: registered algorithm 'TKIP'

12 years, 2 months

Jump to page:

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2008