coreboot January 2008

coreboot@coreboot.org

79 participants
347 discussions

[LinuxBIOS] [PATCH] v3: Print a message before resetting the processor
by Carl-Daniel Hailfinger 11 Jan '08

11 Jan '08

After configuring the PLL registers on Geode LX, we have to reset the processor. However, nothing in the log tells the user why the processor is being reset. Example log follows: LinuxBIOS-3.0.0 Fri Jan 11 15:53:52 MST 2008 starting... Choosing fallback boot. [...] Fallback failed. Try normal boot LAR: Attempting to open 'normal/initram/segment0'. [...] LAR: CHECK normal/initram/segment0 @ 0xfffc49b0 start 0xfffc4a00 len 5564 reallen 5564 compression 0 entry 0x000010ca loadaddress 0x00000000 Entry point is 0xfffc5aca pll_reset: read msr 0x4c000014 _MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000398:0000181e Configuring PLL LinuxBIOS-3.0.0 Fri Jan 11 15:53:52 MST 2008 starting... Choosing fallback boot. [...] Print an informative message before resetting the processor. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: LinuxBIOSv3-betterpllreset/arch/x86/geodelx/geodelx.c =================================================================== --- LinuxBIOSv3-betterpllreset/arch/x86/geodelx/geodelx.c (Revision 551) +++ LinuxBIOSv3-betterpllreset/arch/x86/geodelx/geodelx.c (Arbeitskopie) @@ -187,6 +187,8 @@ /* Use SWFLAGS to remember: "we've already been here". */ msr_glcp_sys_pll.lo |= (1 << RSTPLL_LOWER_SWFLAGS_SHIFT); + printk(BIOS_INFO, "Resetting the processor after PLL " + "configuration for the changes to take effect\n"); /* "Reset the chip" value */ msr_glcp_sys_pll.lo |= RSTPPL_LOWER_CHIP_RESET_SET; wrmsr(GLCP_SYS_RSTPLL, msr_glcp_sys_pll);

3 6

[LinuxBIOS] r553 - LinuxBIOSv3/arch/x86/geodelx
by svn＠openbios.org 11 Jan '08

11 Jan '08

Author: hailfinger Date: 2008-01-12 02:09:47 +0100 (Sat, 12 Jan 2008) New Revision: 553 Modified: LinuxBIOSv3/arch/x86/geodelx/geodelx.c Log: After configuring the PLL registers on Geode LX, we have to reset the processor. However, nothing in the log tells the user why the processor is being reset. Example log follows: LinuxBIOS-3.0.0 Fri Jan 11 15:53:52 MST 2008 starting... Choosing fallback boot. [...] Fallback failed. Try normal boot LAR: Attempting to open 'normal/initram/segment0'. [...] LAR: CHECK normal/initram/segment0 @ 0xfffc49b0 start 0xfffc4a00 len 5564 reallen 5564 compression 0 entry 0x000010ca loadaddress 0x00000000 Entry point is 0xfffc5aca pll_reset: read msr 0x4c000014 _MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000398:0000181e Configuring PLL LinuxBIOS-3.0.0 Fri Jan 11 15:53:52 MST 2008 starting... Choosing fallback boot. [...] Print an informative message before resetting the processor. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Modified: LinuxBIOSv3/arch/x86/geodelx/geodelx.c =================================================================== --- LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2008-01-10 21:13:19 UTC (rev 552) +++ LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2008-01-12 01:09:47 UTC (rev 553) @@ -187,6 +187,8 @@ /* Use SWFLAGS to remember: "we've already been here". */ msr_glcp_sys_pll.lo |= (1 << RSTPLL_LOWER_SWFLAGS_SHIFT); + printk(BIOS_INFO, "Resetting the processor after PLL " + "configuration for the changes to take effect\n"); /* "Reset the chip" value */ msr_glcp_sys_pll.lo |= RSTPPL_LOWER_CHIP_RESET_SET; wrmsr(GLCP_SYS_RSTPLL, msr_glcp_sys_pll);

1 0

[LinuxBIOS] r3047 build service
by LinuxBIOS information 11 Jan '08

11 Jan '08

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "rminnich" checked in revision 3047 to the LinuxBIOS source repository and caused the following changes: Change Log: Fix these to use a more standard relative path for payload. Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3047&device=serengeti_che… If something broke during this checkin please be a pain in rminnich's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] [BUILDROM] Consolidate all the geode Linuxbios targets
by Jordan Crouse 11 Jan '08

11 Jan '08

I'm about to introduce some new code, but first, this is some cleanup of the linuxbios/ directory - all the geode targets were the same, so I consolidated them. Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. [BUILDROM] Consolidate all the geode Linuxbios targets All the Geode LinuxBIOS v2 targets do the same thing, so consolidate them. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Index: buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/alix1c-linuxbios.mk 2008-01-11 12:16:03.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ -# This is the Generic LinuxBIOS target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ - -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean Index: buildrom-devel/packages/linuxbios/geodelx-linuxbios.mk =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ buildrom-devel/packages/linuxbios/geodelx-linuxbios.mk 2008-01-11 14:17:05.000000000 -0700 @@ -0,0 +1,39 @@ +# This target supports all Geode LX platforms - it handles downloading +# the VSA as an additional step + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(LBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +LBV2_BASE_DIR=svn +LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 +LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz +LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +LBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom + +include $(PACKAGE_DIR)/linuxbios/linuxbios.inc + +$(SOURCE_DIR)/$(LBV2_VSA): + @ echo "Fetching the VSA code..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(LBV2_TARBALL): + @ echo "Fetching the LinuxBIOS code..." + @ mkdir -p $(SOURCE_DIR)/linuxbios + @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ + $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ + > $(LBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + +linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) +linuxbios-clean: generic-linuxbios-clean +linuxbios-distclean: generic-linuxbios-distclean Index: buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-11 12:16:08.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ -# This is the Generic LinuxBIOS target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ - -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean Index: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/norwich-linuxbios.mk 2008-01-11 12:16:11.000000000 -0700 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ -# This is the Generic LinuxBIOS target - -echo $(LBV2_TAG) -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -else -$(warning You specified $(LBV2_TAG) a version to pull in your platform config) -endif -endif - -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS rev $(LBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ - -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean Index: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel.orig/config/platforms/alix1c.conf 2008-01-11 13:39:10.000000000 -0700 +++ buildrom-devel/config/platforms/alix1c.conf 2008-01-11 13:39:30.000000000 -0700 @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/alix1c-linuxbios.mk +LBV2_MK=$(PACKAGE_DIR)/linuxbios/geodelx-linuxbios.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel.orig/config/platforms/db800.conf 2008-01-11 13:39:10.000000000 -0700 +++ buildrom-devel/config/platforms/db800.conf 2008-01-11 13:39:39.000000000 -0700 @@ -14,7 +14,7 @@ # Use the same settings as the Norwich platform KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +LBV2_MK=$(PACKAGE_DIR)/linuxbios/geodelx-linuxbios.mk # kernel configuration (for LAB) # Use the same settings as the Norwich platform Index: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel.orig/config/platforms/dbe61.conf 2008-01-11 13:39:10.000000000 -0700 +++ buildrom-devel/config/platforms/dbe61.conf 2008-01-11 13:39:49.000000000 -0700 @@ -14,7 +14,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +LBV2_MK=$(PACKAGE_DIR)/linuxbios/geodelx-linuxbios.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel.orig/config/platforms/msm800sev.conf 2008-01-11 13:39:11.000000000 -0700 +++ buildrom-devel/config/platforms/msm800sev.conf 2008-01-11 13:39:57.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/msm800sev-linuxbios.mk +LBV2_MK=$(PACKAGE_DIR)/linuxbios/geodelx-linuxbios.mk # kernel configuration (for LAB) Index: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel.orig/config/platforms/norwich.conf 2008-01-11 13:39:11.000000000 -0700 +++ buildrom-devel/config/platforms/norwich.conf 2008-01-11 13:40:07.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +LBV2_MK=$(PACKAGE_DIR)/linuxbios/geodelx-linuxbios.mk # kernel configuration (for LAB)

3 8

[LinuxBIOS] r95 - buildrom-devel/config/platforms
by svn＠openbios.org 11 Jan '08

11 Jan '08

Author: jcrouse Date: 2008-01-11 23:53:36 +0100 (Fri, 11 Jan 2008) New Revision: 95 Modified: buildrom-devel/config/platforms/alix1c.conf buildrom-devel/config/platforms/msm800sev.conf Log: [BUILDROM] Bump the mem800sev and alix1c revisions Bump the linuxbios revision of the mem800sev and alix1c to take advantage of the payload patch added to LBv2. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Ward Vandewege <ward(a)gnu.org> Modified: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel/config/platforms/alix1c.conf 2008-01-11 20:46:46 UTC (rev 94) +++ buildrom-devel/config/platforms/alix1c.conf 2008-01-11 22:53:36 UTC (rev 95) @@ -29,7 +29,7 @@ LINUXBIOS_BOARD=alix1c LBV2_CONFIG=Config.lb LBV2_TDIR=alix1c -LBV2_TAG=2807 +LBV2_TAG=3047 LINUXBIOS_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel/config/platforms/msm800sev.conf 2008-01-11 20:46:46 UTC (rev 94) +++ buildrom-devel/config/platforms/msm800sev.conf 2008-01-11 22:53:36 UTC (rev 95) @@ -30,7 +30,7 @@ LINUXBIOS_BOARD=msm800sev LBV2_CONFIG=Config.lb LBV2_TDIR=msm800sev -LBV2_TAG=2810 +LBV2_TAG=3047 LINUXBIOS_ROM_NAME=linuxbios.rom # FILO configuration

1 0

[LinuxBIOS] r3047 - in trunk/LinuxBIOSv2/targets: digitallogic/msm800sev pcengines/alix1c
by svn＠openbios.org 11 Jan '08

11 Jan '08

Author: rminnich Date: 2008-01-11 23:37:27 +0100 (Fri, 11 Jan 2008) New Revision: 3047 Modified: trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb trunk/LinuxBIOSv2/targets/pcengines/alix1c/Config.lb Log: Fix these to use a more standard relative path for payload. Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb 2008-01-11 18:23:47 UTC (rev 3046) +++ trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb 2008-01-11 22:37:27 UTC (rev 3047) @@ -22,7 +22,7 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - payload /tmp/filo.elf + payload ../payload.elf end buildrom ./linuxbios.rom ROM_SIZE "fallback" Modified: trunk/LinuxBIOSv2/targets/pcengines/alix1c/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/pcengines/alix1c/Config.lb 2008-01-11 18:23:47 UTC (rev 3046) +++ trunk/LinuxBIOSv2/targets/pcengines/alix1c/Config.lb 2008-01-11 22:37:27 UTC (rev 3047) @@ -19,7 +19,7 @@ romimage "fallback" option USE_FALLBACK_IMAGE = 1 option LINUXBIOS_EXTRA_VERSION = ".0Fallback" - payload /tmp/filo.elf + payload ../payload.elf end buildrom ./linuxbios.rom ROM_SIZE "fallback"

1 0

[LinuxBIOS] INIT detected.
by Steve Isaacs 11 Jan '08

11 Jan '08

Is this message normal or does it indicate a problem that needs to be corrected? INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... Looking at the code this is emitted in model_fxx/init_cpus.c when cpu_init_detectedx is non-zero. Thanks, Steve

2 2

[LinuxBIOS] r94 - buildrom-devel/packages/linuxbios
by svn＠openbios.org 11 Jan '08

11 Jan '08

Author: ward Date: 2008-01-11 21:46:46 +0100 (Fri, 11 Jan 2008) New Revision: 94 Modified: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk Log: This spurious echo sneaked in in r90 but breaks the build for the norwich board. This is a trivial patch. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Ward Vandewege <ward(a)gnu.org> Modified: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-11 20:02:53 UTC (rev 93) +++ buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-11 20:46:46 UTC (rev 94) @@ -1,6 +1,5 @@ # This is the Generic LinuxBIOS target -echo $(LBV2_TAG) ifeq ($(CONFIG_PLATFORM),y) ifeq ($(LBV2_TAG),) $(error You need to specify a version to pull in your platform config)

1 0

[LinuxBIOS] r93 - buildrom-devel/packages/busybox/conf
by svn＠openbios.org 11 Jan '08

11 Jan '08

Author: myles Date: 2008-01-11 21:02:53 +0100 (Fri, 11 Jan 2008) New Revision: 93 Added: buildrom-devel/packages/busybox/conf/defconfig-serengeti_cheetah-x86_64 Log: Sorry I missed this file in an earlier commit. Signed-off-by: Myles Watson <myles(a)pel.cs.byu.edu> Acked-by: Myles Watson <myles(a)pel.cs.byu.edu> Added: buildrom-devel/packages/busybox/conf/defconfig-serengeti_cheetah-x86_64 =================================================================== --- buildrom-devel/packages/busybox/conf/defconfig-serengeti_cheetah-x86_64 (rev 0) +++ buildrom-devel/packages/busybox/conf/defconfig-serengeti_cheetah-x86_64 2008-01-11 20:02:53 UTC (rev 93) @@ -0,0 +1,598 @@ +# +# Automatically generated make config: don't edit +# +HAVE_DOT_CONFIG=y + +# +# Busybox Settings +# + +# +# General Configuration +# +CONFIG_FEATURE_BUFFERS_USE_MALLOC=y +# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +# CONFIG_FEATURE_VERBOSE_USAGE is not set +# CONFIG_FEATURE_INSTALLER is not set +# CONFIG_LOCALE_SUPPORT is not set +# CONFIG_FEATURE_DEVFS is not set +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_CLEAN_UP is not set +CONFIG_FEATURE_SUID=y +# CONFIG_FEATURE_SUID_CONFIG is not set +# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set +# CONFIG_SELINUX is not set + +# +# Build Options +# +# CONFIG_STATIC is not set +# CONFIG_DISABLE_SHARED is not set +# CONFIG_BUILD_LIBBUSYBOX is not set +# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set +# CONFIG_FEATURE_SHARED_BUSYBOX is not set +CONFIG_LFS=y +# USING_CROSS_COMPILER is not set +CROSS_COMPILER_PREFIX="" +EXTRA_CFLAGS_OPTIONS="" +# CONFIG_BUILD_AT_ONCE is not set + +# +# Debugging Options +# +# CONFIG_DEBUG is not set +# CONFIG_NO_DEBUG_LIB is not set +# CONFIG_DMALLOC is not set +# CONFIG_EFENCE is not set +CONFIG_DEBUG_YANK_SUSv2=y + +# +# Installation Options +# +# CONFIG_INSTALL_NO_USR is not set +CONFIG_INSTALL_APPLET_SYMLINKS=y +# CONFIG_INSTALL_APPLET_HARDLINKS is not set +# CONFIG_INSTALL_APPLET_DONT is not set +PREFIX="./_install" + +# +# Busybox Library Tuning +# +CONFIG_MD5_SIZE_VS_SPEED=2 + +# +# Applets +# + +# +# Archival Utilities +# +# CONFIG_AR is not set +# CONFIG_FEATURE_AR_LONG_FILENAMES is not set +# CONFIG_BUNZIP2 is not set +# CONFIG_CPIO is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set +# CONFIG_GUNZIP is not set +# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set +# CONFIG_GZIP is not set +# CONFIG_RPM2CPIO is not set +# CONFIG_RPM is not set +# CONFIG_TAR is not set +# CONFIG_FEATURE_TAR_CREATE is not set +# CONFIG_FEATURE_TAR_BZIP2 is not set +# CONFIG_FEATURE_TAR_LZMA is not set +# CONFIG_FEATURE_TAR_FROM is not set +# CONFIG_FEATURE_TAR_GZIP is not set +# CONFIG_FEATURE_TAR_COMPRESS is not set +# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set +# CONFIG_FEATURE_TAR_GNU_EXTENSIONS is not set +# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set +# CONFIG_UNCOMPRESS is not set +# CONFIG_UNLZMA is not set +# CONFIG_FEATURE_LZMA_FAST is not set +# CONFIG_UNZIP is not set +# CONFIG_FEATURE_UNARCHIVE_TAPE is not set +# CONFIG_FEATURE_DEB_TAR_GZ is not set +# CONFIG_FEATURE_DEB_TAR_BZ2 is not set +# CONFIG_FEATURE_DEB_TAR_LZMA is not set + +# +# Coreutils +# +CONFIG_BASENAME=y +# CONFIG_CAL is not set +CONFIG_CAT=y +# CONFIG_CHGRP is not set +# CONFIG_CHMOD is not set +# CONFIG_CHOWN is not set +# CONFIG_CHROOT is not set +# CONFIG_CMP is not set +# CONFIG_COMM is not set +CONFIG_CP=y +# CONFIG_CUT is not set +# CONFIG_DATE is not set +# CONFIG_FEATURE_DATE_ISOFMT is not set +CONFIG_DD=y +# CONFIG_DF is not set +# CONFIG_DIRNAME is not set +# CONFIG_DOS2UNIX is not set +# CONFIG_UNIX2DOS is not set +# CONFIG_DU is not set +# CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K is not set +CONFIG_ECHO=y +CONFIG_FEATURE_FANCY_ECHO=y +# CONFIG_ENV is not set +# CONFIG_EXPR is not set +# CONFIG_EXPR_MATH_SUPPORT_64 is not set +CONFIG_FALSE=y +# CONFIG_FOLD is not set +# CONFIG_HEAD is not set +# CONFIG_FEATURE_FANCY_HEAD is not set +# CONFIG_HOSTID is not set +# CONFIG_ID is not set +# CONFIG_INSTALL is not set +# CONFIG_LENGTH is not set +CONFIG_LN=y +# CONFIG_LOGNAME is not set +CONFIG_LS=y +# CONFIG_FEATURE_LS_FILETYPES is not set +# CONFIG_FEATURE_LS_FOLLOWLINKS is not set +# CONFIG_FEATURE_LS_RECURSIVE is not set +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +# CONFIG_FEATURE_LS_COLOR is not set +# CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set +# CONFIG_MD5SUM is not set +CONFIG_MKDIR=y +# CONFIG_MKFIFO is not set +CONFIG_MKNOD=y +CONFIG_MV=y +# CONFIG_NICE is not set +# CONFIG_NOHUP is not set +# CONFIG_OD is not set +# CONFIG_PRINTENV is not set +# CONFIG_PRINTF is not set +CONFIG_PWD=y +# CONFIG_REALPATH is not set +CONFIG_RM=y +# CONFIG_RMDIR is not set +# CONFIG_SEQ is not set +# CONFIG_SHA1SUM is not set +# CONFIG_SLEEP is not set +# CONFIG_FEATURE_FANCY_SLEEP is not set +# CONFIG_SORT is not set +# CONFIG_FEATURE_SORT_BIG is not set +# CONFIG_STAT is not set +# CONFIG_FEATURE_STAT_FORMAT is not set +# CONFIG_STTY is not set +# CONFIG_SUM is not set +# CONFIG_SYNC is not set +# CONFIG_TAIL is not set +# CONFIG_FEATURE_FANCY_TAIL is not set +# CONFIG_TEE is not set +# CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set +CONFIG_TEST=y +# CONFIG_FEATURE_TEST_64 is not set +CONFIG_TOUCH=y +# CONFIG_TR is not set +# CONFIG_FEATURE_TR_CLASSES is not set +# CONFIG_FEATURE_TR_EQUIV is not set +CONFIG_TRUE=y +# CONFIG_TTY is not set +# CONFIG_UNAME is not set +# CONFIG_UNIQ is not set +CONFIG_USLEEP=y +# CONFIG_UUDECODE is not set +# CONFIG_UUENCODE is not set +# CONFIG_WATCH is not set +# CONFIG_WC is not set +# CONFIG_WHO is not set +# CONFIG_WHOAMI is not set +# CONFIG_YES is not set + +# +# Common options for cp and mv +# +CONFIG_FEATURE_PRESERVE_HARDLINKS=y + +# +# Common options for ls, more and telnet +# +CONFIG_FEATURE_AUTOWIDTH=y + +# +# Common options for df, du, ls +# +# CONFIG_FEATURE_HUMAN_READABLE is not set +# CONFIG_FEATURE_MD5_SHA1_SUM_CHECK is not set + +# +# Console Utilities +# +# CONFIG_CHVT is not set +CONFIG_CLEAR=y +# CONFIG_DEALLOCVT is not set +# CONFIG_DUMPKMAP is not set +# CONFIG_LOADFONT is not set +# CONFIG_LOADKMAP is not set +CONFIG_OPENVT=y +# CONFIG_RESET is not set +# CONFIG_SETCONSOLE is not set +# CONFIG_SETKEYCODES is not set + +# +# Debian Utilities +# +# CONFIG_MKTEMP is not set +# CONFIG_PIPE_PROGRESS is not set +CONFIG_READLINK=y +CONFIG_FEATURE_READLINK_FOLLOW=y +CONFIG_RUN_PARTS=y +# CONFIG_START_STOP_DAEMON is not set +# CONFIG_WHICH is not set + +# +# Editors +# +# CONFIG_AWK is not set +# CONFIG_FEATURE_AWK_MATH is not set +# CONFIG_PATCH is not set +# CONFIG_SED is not set +# CONFIG_VI is not set +# CONFIG_FEATURE_VI_COLON is not set +# CONFIG_FEATURE_VI_YANKMARK is not set +# CONFIG_FEATURE_VI_SEARCH is not set +# CONFIG_FEATURE_VI_USE_SIGNALS is not set +# CONFIG_FEATURE_VI_DOT_CMD is not set +# CONFIG_FEATURE_VI_READONLY is not set +# CONFIG_FEATURE_VI_SETOPTS is not set +# CONFIG_FEATURE_VI_SET is not set +# CONFIG_FEATURE_VI_WIN_RESIZE is not set +# CONFIG_FEATURE_VI_OPTIMIZE_CURSOR is not set + +# +# Finding Utilities +# +# CONFIG_FIND is not set +# CONFIG_FEATURE_FIND_MTIME is not set +# CONFIG_FEATURE_FIND_MMIN is not set +# CONFIG_FEATURE_FIND_PERM is not set +# CONFIG_FEATURE_FIND_TYPE is not set +# CONFIG_FEATURE_FIND_XDEV is not set +# CONFIG_FEATURE_FIND_NEWER is not set +# CONFIG_FEATURE_FIND_INUM is not set +# CONFIG_FEATURE_FIND_EXEC is not set +# CONFIG_GREP is not set +# CONFIG_FEATURE_GREP_EGREP_ALIAS is not set +# CONFIG_FEATURE_GREP_FGREP_ALIAS is not set +# CONFIG_FEATURE_GREP_CONTEXT is not set +# CONFIG_XARGS is not set +# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set +# CONFIG_FEATURE_XARGS_SUPPORT_QUOTES is not set +# CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set +# CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM is not set + +# +# Init Utilities +# +# CONFIG_INIT is not set +# CONFIG_FEATURE_USE_INITTAB is not set +# CONFIG_FEATURE_INIT_SCTTY is not set +# CONFIG_FEATURE_EXTRA_QUIET is not set +# CONFIG_FEATURE_INIT_COREDUMPS is not set +# CONFIG_FEATURE_INITRD is not set +CONFIG_HALT=y +# CONFIG_MESG is not set + +# +# Login/Password Management Utilities +# +# CONFIG_FEATURE_SHADOWPASSWDS is not set +# CONFIG_USE_BB_SHADOW is not set +# CONFIG_USE_BB_PWD_GRP is not set +# CONFIG_ADDGROUP is not set +# CONFIG_DELGROUP is not set +# CONFIG_ADDUSER is not set +# CONFIG_DELUSER is not set +# CONFIG_GETTY is not set +# CONFIG_FEATURE_UTMP is not set +# CONFIG_FEATURE_WTMP is not set +# CONFIG_LOGIN is not set +# CONFIG_FEATURE_SECURETTY is not set +# CONFIG_PASSWD is not set +# CONFIG_SU is not set +# CONFIG_SULOGIN is not set +# CONFIG_VLOCK is not set + +# +# Linux Ext2 FS Progs +# +# CONFIG_CHATTR is not set +# CONFIG_E2FSCK is not set +# CONFIG_FSCK is not set +# CONFIG_LSATTR is not set +# CONFIG_MKE2FS is not set +# CONFIG_TUNE2FS is not set +# CONFIG_E2LABEL is not set +# CONFIG_FINDFS is not set + +# +# Linux Module Utilities +# +# CONFIG_INSMOD is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +# CONFIG_RMMOD is not set +# CONFIG_LSMOD is not set +# CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set +# CONFIG_MODPROBE is not set +# CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS is not set +# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set +# CONFIG_FEATURE_2_4_MODULES is not set +# CONFIG_FEATURE_2_6_MODULES is not set +# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set + +# +# Linux System Utilities +# +CONFIG_DMESG=y +CONFIG_FBSET=y +CONFIG_FEATURE_FBSET_FANCY=y +# CONFIG_FEATURE_FBSET_READMODE is not set +# CONFIG_FDFLUSH is not set +# CONFIG_FDFORMAT is not set +# CONFIG_FDISK is not set +FDISK_SUPPORT_LARGE_DISKS=y +# CONFIG_FEATURE_FDISK_WRITABLE is not set +# CONFIG_FEATURE_AIX_LABEL is not set +# CONFIG_FEATURE_SGI_LABEL is not set +# CONFIG_FEATURE_SUN_LABEL is not set +# CONFIG_FEATURE_OSF_LABEL is not set +# CONFIG_FEATURE_FDISK_ADVANCED is not set +# CONFIG_FREERAMDISK is not set +# CONFIG_FSCK_MINIX is not set +# CONFIG_MKFS_MINIX is not set +# CONFIG_FEATURE_MINIX2 is not set +# CONFIG_GETOPT is not set +# CONFIG_HEXDUMP is not set +# CONFIG_HWCLOCK is not set +# CONFIG_FEATURE_HWCLOCK_LONGOPTIONS is not set +# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set +# CONFIG_IPCRM is not set +# CONFIG_IPCS is not set +# CONFIG_LOSETUP is not set +# CONFIG_MDEV is not set +# CONFIG_FEATURE_MDEV_CONF is not set +# CONFIG_MKSWAP is not set +# CONFIG_MORE is not set +# CONFIG_FEATURE_USE_TERMIOS is not set +CONFIG_MOUNT=y +# CONFIG_FEATURE_MOUNT_NFS is not set +# CONFIG_PIVOT_ROOT is not set +# CONFIG_RDATE is not set +# CONFIG_READPROFILE is not set +# CONFIG_SETARCH is not set +# CONFIG_SWAPONOFF is not set +# CONFIG_SWITCH_ROOT is not set +CONFIG_UMOUNT=y +# CONFIG_FEATURE_UMOUNT_ALL is not set + +# +# Common options for mount/umount +# +# CONFIG_FEATURE_MOUNT_LOOP is not set +# CONFIG_FEATURE_MTAB_SUPPORT is not set + +# +# Miscellaneous Utilities +# +# CONFIG_ADJTIMEX is not set +# CONFIG_BBCONFIG is not set +# CONFIG_CROND is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_CRONTAB is not set +# CONFIG_DC is not set +# CONFIG_DEVFSD is not set +# CONFIG_DEVFSD_MODLOAD is not set +# CONFIG_DEVFSD_FG_NP is not set +# CONFIG_DEVFSD_VERBOSE is not set +# CONFIG_EJECT is not set +# CONFIG_LAST is not set +# CONFIG_LESS is not set +# CONFIG_FEATURE_LESS_BRACKETS is not set +# CONFIG_FEATURE_LESS_FLAGS is not set +# CONFIG_FEATURE_LESS_FLAGCS is not set +# CONFIG_FEATURE_LESS_MARKS is not set +# CONFIG_FEATURE_LESS_REGEXP is not set +# CONFIG_HDPARM is not set +# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set +# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set +# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +CONFIG_MAKEDEVS=y +# CONFIG_FEATURE_MAKEDEVS_LEAF is not set +CONFIG_FEATURE_MAKEDEVS_TABLE=y +# CONFIG_MOUNTPOINT is not set +# CONFIG_MT is not set +# CONFIG_RUNLEVEL is not set +# CONFIG_RX is not set +# CONFIG_STRINGS is not set +# CONFIG_SETSID is not set +# CONFIG_TIME is not set +# CONFIG_WATCHDOG is not set + +# +# Networking Utilities +# +CONFIG_FEATURE_IPV6=y +# CONFIG_ARPING is not set +# CONFIG_DNSD is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +CONFIG_HOSTNAME=y +# CONFIG_HTTPD is not set +# CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY is not set +# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set +# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set +# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set +# CONFIG_FEATURE_HTTPD_SETUID is not set +# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set +# CONFIG_FEATURE_HTTPD_CGI is not set +# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set +# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set +# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set +CONFIG_IFCONFIG=y +# CONFIG_FEATURE_IFCONFIG_STATUS is not set +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +# CONFIG_FEATURE_IFCONFIG_HW is not set +CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y +CONFIG_IFUPDOWN=y +CONFIG_FEATURE_IFUPDOWN_IP=y +CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IPV4=y +CONFIG_FEATURE_IFUPDOWN_IPV6=y +# CONFIG_FEATURE_IFUPDOWN_IPX is not set +CONFIG_FEATURE_IFUPDOWN_MAPPING=y +# CONFIG_INETD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO is not set +# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN is not set +# CONFIG_FEATURE_INETD_RPC is not set +CONFIG_IP=y +CONFIG_FEATURE_IP_ADDRESS=y +CONFIG_FEATURE_IP_LINK=y +CONFIG_FEATURE_IP_ROUTE=y +# CONFIG_FEATURE_IP_TUNNEL is not set +# CONFIG_IPCALC is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_NAMEIF is not set +# CONFIG_NC is not set +# CONFIG_NC_GAPING_SECURITY_HOLE is not set +# CONFIG_NETSTAT is not set +# CONFIG_NSLOOKUP is not set +# CONFIG_PING is not set +# CONFIG_FEATURE_FANCY_PING is not set +# CONFIG_PING6 is not set +# CONFIG_FEATURE_FANCY_PING6 is not set +# CONFIG_ROUTE is not set +# CONFIG_TELNET is not set +# CONFIG_FEATURE_TELNET_TTYPE is not set +# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set +# CONFIG_TELNETD is not set +# CONFIG_FEATURE_TELNETD_INETD is not set +CONFIG_TFTP=y +CONFIG_FEATURE_TFTP_GET=y +# CONFIG_FEATURE_TFTP_PUT is not set +CONFIG_FEATURE_TFTP_BLOCKSIZE=y +# CONFIG_FEATURE_TFTP_DEBUG is not set +# CONFIG_TRACEROUTE is not set +# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set +# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set +# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set +# CONFIG_VCONFIG is not set +CONFIG_WGET=y +# CONFIG_FEATURE_WGET_STATUSBAR is not set +# CONFIG_FEATURE_WGET_AUTHENTICATION is not set +CONFIG_FEATURE_WGET_IP6_LITERAL=y + +# +# udhcp Server/Client +# +# CONFIG_UDHCPD is not set +CONFIG_UDHCPC=y +# CONFIG_DUMPLEASES is not set +CONFIG_FEATURE_UDHCP_SYSLOG=y +# CONFIG_FEATURE_UDHCP_DEBUG is not set +# CONFIG_ZCIP is not set + +# +# Process Utilities +# +# CONFIG_FREE is not set +# CONFIG_FUSER is not set +# CONFIG_KILL is not set +# CONFIG_KILLALL is not set +# CONFIG_PIDOF is not set +# CONFIG_FEATURE_PIDOF_SINGLE is not set +# CONFIG_FEATURE_PIDOF_OMIT is not set +# CONFIG_PS is not set +# CONFIG_FEATURE_PS_WIDE is not set +# CONFIG_RENICE is not set +# CONFIG_BB_SYSCTL is not set +# CONFIG_TOP is not set +# CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE is not set +# CONFIG_UPTIME is not set + +# +# Shells +# +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_LASH is not set +# CONFIG_FEATURE_SH_IS_MSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +CONFIG_ASH=y + +# +# Ash Shell Options +# +# CONFIG_ASH_JOB_CONTROL is not set +# CONFIG_ASH_READ_NCHARS is not set +# CONFIG_ASH_READ_TIMEOUT is not set +CONFIG_ASH_ALIAS=y +CONFIG_ASH_MATH_SUPPORT=y +# CONFIG_ASH_MATH_SUPPORT_64 is not set +CONFIG_ASH_GETOPTS=y +CONFIG_ASH_CMDCMD=y +# CONFIG_ASH_BUILTIN_ECHO is not set +# CONFIG_ASH_MAIL is not set +CONFIG_ASH_OPTIMIZE_FOR_SIZE=y +# CONFIG_ASH_RANDOM_SUPPORT is not set +# CONFIG_ASH_EXPAND_PRMT is not set +# CONFIG_HUSH is not set +# CONFIG_LASH is not set +# CONFIG_MSH is not set + +# +# Bourne Shell Options +# +CONFIG_FEATURE_SH_EXTRA_QUIET=y +CONFIG_FEATURE_SH_STANDALONE_SHELL=y +CONFIG_FEATURE_COMMAND_EDITING=y +# CONFIG_FEATURE_COMMAND_EDITING_VI is not set +CONFIG_FEATURE_COMMAND_HISTORY=15 +# CONFIG_FEATURE_COMMAND_SAVEHISTORY is not set +CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y +# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set +# CONFIG_FEATURE_SH_FANCY_PROMPT is not set + +# +# System Logging Utilities +# +# CONFIG_SYSLOGD is not set +# CONFIG_FEATURE_ROTATE_LOGFILE is not set +# CONFIG_FEATURE_REMOTE_LOG is not set +# CONFIG_FEATURE_IPC_SYSLOG is not set +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0 +# CONFIG_LOGREAD is not set +# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set +# CONFIG_KLOGD is not set +# CONFIG_LOGGER is not set

1 0

Re: [LinuxBIOS] r3046 - trunk/LinuxBIOSv2/targets
by Myles Watson 11 Jan '08

11 Jan '08

> Author: jcrouse > Date: 2008-01-11 19:23:47 +0100 (Fri, 11 Jan 2008) > New Revision: 3046 > > Modified: > trunk/LinuxBIOSv2/targets/buildtarget > Log: > Add the ability to extend CFLAGS as needed for several new distros > Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> > Acked-by: Peter Stuge <peter(a)stuge.se> > Acked-by: Stefan Reinauer <stepan(a)coresystems.de> > Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> > > > > Modified: trunk/LinuxBIOSv2/targets/buildtarget > =================================================================== > --- trunk/LinuxBIOSv2/targets/buildtarget 2008-01-11 00:32:07 UTC (rev > 3045) > +++ trunk/LinuxBIOSv2/targets/buildtarget 2008-01-11 18:23:47 UTC (rev > 3046) > @@ -53,4 +53,25 @@ > export PYTHONPATH=$config_dir > $PYTHON $config_py $config_lb $lbpath > > +# now start checking for distro-specific breakage. > +## This check is for the no stack protector mess. > +EXTRA_CFLAGS= > + > +if [ -z "$CC" ]; then > + CC=gcc > +fi > + > +$CC -fno-stack-protector -S -xc /dev/null -o .$$.tmp > + > +if [ $? -eq 0 ]; then > + EXTRA_CFLAGS=-fno-stack-protector > +fi This adds the flag for me, even though I didn't need it. Was that intended? Myles > + > +rm -rf .$$.tmp > + > +for i in $build_dir/Makefile.settings $build_dir/*/Makefile.settings > +do > + echo CFLAGS+=$EXTRA_CFLAGS >>$i > +done > + > exit $? > > > -- > linuxbios mailing list > linuxbios(a)linuxbios.org > http://www.linuxbios.org/mailman/listinfo/linuxbios

3 3

← Newer
1
...
22
23
24
25
26
27
28
...
35
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot January 2008