Author: rminnich
Date: 2006-09-20 18:39:30 +0200 (Wed, 20 Sep 2006)
New Revision: 2430
Modified:
trunk/LinuxBIOSv2/src/config/Options.lb
trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Config.lb
trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Config.lb
trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Options.lb
trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/auto.c
trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/mainboard.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c
trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/chip.h
trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/cs5536.c
trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb
Log:
Lots of lx fixes. CLeanup mainly. THings now build
Signed-off-by: Ronald G. Minnich
Modified: trunk/LinuxBIOSv2/src/config/Options.lb
===================================================================
--- trunk/LinuxBIOSv2/src/config/Options.lb 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/config/Options.lb 2006-09-20 16:39:30 UTC (rev 2430)
@@ -904,7 +904,14 @@
comment "allow PCI device get 4G above Region as pref mem"
end
+define CONFIG_VIDEO_MB
+ default none
+ export used
+ comment "Integrated graphics with UMA has dynamic setup"
+end
+
+
###############################################
# Board specific options
###############################################
Modified: trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Config.lb 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/mainboard/artecgroup/dbe61/Config.lb 2006-09-20 16:39:30 UTC (rev 2430)
@@ -134,10 +134,10 @@
device pci 1.0 on end # Host Bridge
- chip drivers/pci/realmode
- device pci 1.1 on end # VGA
- register "rom_address" = "0xfffc0000" # at the beginning of 256k
- end
+# chip drivers/pci/realmode
+# device pci 1.1 on end # VGA
+# register "rom_address" = "0xfffc0000" # at the beginning of 256k
+# end
device pci 1.2 off end # AES
chip southbridge/amd/cs5536_lx
@@ -184,10 +184,10 @@
device pci f.6 off end # UDC controller
device pci f.7 off end # OTG controller
end
- chip drivers/pci/rtl8139
- device pci d.0 on end # Realtek LAN
- register "nic_irq" = "10"
- end
+# chip drivers/pci/rtl8139
+## device pci d.0 on end # Realtek LAN
+# register "nic_irq" = "10"
+# end
end
end
Modified: trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Config.lb 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Config.lb 2006-09-20 16:39:30 UTC (rev 2430)
@@ -126,7 +126,7 @@
chip northbridge/amd/lx
# they keep changing this. 0:f.0 5c.w to see where it is
register "irqmap" = "0xbaba"
- register "setupflash" = "1"
+ register "setupflash" = "0"
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
@@ -136,21 +136,44 @@
device pci 1.0 on end
device pci 1.1 on end
chip southbridge/amd/cs5536_lx
- register "enable_gpio0_inta" = "1"
- register "enable_ide_nand_flash" = "0"
- register "enable_uarta" = "1"
- register "audio_irq" = "11"
- register "usbf4_irq" = "11"
- register "usbf11_irq" = "11"
- register "usbf6_irq" = "11"
- register "usbf7_irq" = "11"
- device pci d.0 on end # EEPRO 1000
+ register "isa_irq" = "0"
+ #register "flash_irq" = "14"
+
+ ## IDE IRQ
+ register "enable_ide_irq" = "0"
+
+ register "audio_irq" = "5"
+ register "usb_irq" = "7"
+
+ register "uart0_irq" = "0"
+ register "uart1_irq" = "4"
+
+ ## PCI INTA ... INTD and their GPIO pins
+ ## int==0: disable
+ register "pci_int[0]" = "0"
+ register "pci_int[1]" = "10"
+ register "pci_int[2]" = "0"
+ register "pci_int[3]" = "0"
+ register "pci_int_pin[0]" = "0"
+ register "pci_int_pin[1]" = "7"
+ register "pci_int_pin[2]" = "0"
+ register "pci_int_pin[3]" = "0"
+
+
+ # Keyboard Emulation Logic IRQs
+ # Enable keyboard IRQ2
+ register "enable_kel_keyb_irq" = "0"
+ # Enable mouse IRQ12
+ register "enable_kel_mouse_irq" = "0"
+ # Configure KEL Emulation IRQ, 0 to disable
+ register "kel_emul_irq" = "0"
+
device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
+ device pci f.1 on end # Flash controller
+ device pci f.2 off end # IDE controller
device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0" # End of list has a zero
end
end
end
Modified: trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Options.lb
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Options.lb 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/Options.lb 2006-09-20 16:39:30 UTC (rev 2430)
@@ -40,14 +40,21 @@
uses TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_VIDEO_MB
+default CONFIG_VIDEO_MB=8
+
+
## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE = 256*1024
+default ROM_SIZE = 1024*1024
###
### Build options
###
-
+#default CONFIG_CONSOLE_VGA=1
+#default CONFIG_PCI_ROM_RUN=0
##
## Build code for the fallback boot
##
Modified: trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/auto.c
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/auto.c 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/auto.c 2006-09-20 16:39:30 UTC (rev 2430)
@@ -39,22 +39,6 @@
-
-/* sdram parameters for OLPC:
- row address = 13
- col address = 9
- banks = 4
- dimm0size=128MB
- d0_MB=1 (module banks)
- d0_cb=4 (component banks)
- do_psz=4KB (page size)
- Trc=10 (clocks) (ref2act)
- Tras=7 (act2pre)
- Trcd=3 (act2cmd)
- Trp=3 (pre2act)
- Trrd=2 (act2act)
- Tref=17.8ms
- */
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
@@ -66,49 +50,9 @@
unsigned char module_banks, val;
-#if 0 //GX3
- msr = rdmsr(MC_CF07_DATA);
-
- /* get module banks (sides) per dimm, SPD byte 5 */
- module_banks = 1;
- module_banks >>= 1;
- msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
- msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
-
- /* get component banks per module bank, SPD byte 17 */
- val = 4;
- val >>= 2;
- msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
-
- /* get the module bank density, SPD byte 31 */
- /* this is multiples of 8 MB */
- /* actually it is 2^x*4, where x is the value you put in */
- /* for OLPC, set default size */
- /* dimm size - hardcoded 128Mb */
- val = 5;
- msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
-
- /* page size = 2^col address */
- val = 2; /* 4096 bytes */
- msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
- msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
-
- print_debug("computed msr.hi ");
- print_debug_hex32(msr.hi);
- print_debug("\r\n");
-
- /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
- /* well, it may be close. It's about 200,000 ticks */
- msr.lo = 0x00003000;
- wrmsr(MC_CF07_DATA, msr);
-
-#endif
+ msr.hi = 0x10075012;
+ msr.lo = 0x00000040;
- msr.hi = 0x00005012;
- msr.lo = 0x05000040;
-
wrmsr(MC_CF07_DATA, msr); //GX3
/* timing and mode ... */
@@ -140,16 +84,16 @@
#include "northbridge/amd/lx/raminit.c"
#include "sdram/generic_sdram.c"
-#define PLLMSRhi 0x00001490
-#define PLLMSRlo 0x02000030
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
+/* CPU and GLIU mult/div */
+#define PLLMSRhi 0x0000039C
+/* Hold Count - how long we will sit in reset */
+#define PLLMSRlo 0x00DE0000
+
#include "northbridge/amd/lx/pll_reset.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
static void msr_init(void)
{
- __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
Modified: trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/mainboard.c
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/mainboard.c 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/mainboard/digitallogic/msm800sev/mainboard.c 2006-09-20 16:39:30 UTC (rev 2430)
@@ -4,9 +4,25 @@
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/lxdef.h>
#include "chip.h"
+#define DIVIL_LBAR_GPIO 0x5140000c
+static void init_gpio()
+ {
+ msr_t msr;
+ printk_debug("Initializing GPIO module...\n");
+ // initialize the GPIO LBAR
+ msr.lo = GPIO_BASE;
+ msr.hi = 0x0000f001;
+ wrmsr(DIVIL_LBAR_GPIO, msr);
+ msr = rdmsr(DIVIL_LBAR_GPIO);
+ printk_debug("DIVIL_LBAR_GPIO set to 0x%08x 0x%08x\n", msr.hi, msr.lo);
+}
+
+
static void init(struct device *dev)
{
unsigned bus = 0;
@@ -17,6 +33,7 @@
printk_debug("DIGITALLOGIC MSM800SSEV ENTER %s\n", __FUNCTION__);
+#if 0
// FIXME: do we need to initialize USB OHCI this way?
printk_debug("%s (%x,%x) set USB PCI interrupt line to %d\n",
__FUNCTION__, bus, devUsb, irqUsb);
@@ -33,6 +50,8 @@
nic = dev_find_slot(bus, devNic);
if (!nic) printk_err("Could not find USB\n");
else pci_write_config8(nic, PCI_INTERRUPT_LINE, irqNic);
+#endif
+ init_gpio();
printk_debug("DIGITALLOGIC MSM800SSEV EXIT %s\n", __FUNCTION__);
}
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c 2006-09-20 16:39:30 UTC (rev 2430)
@@ -47,7 +47,7 @@
* External Monochrome Card Support(12) 0, NO
* Controller Priority Select(11) 1, Primary
* Display Select(10:8) 0x0, CRT
- * Graphics Memory Size(7:1) VIDEO_MB >> 1,
+ * Graphics Memory Size(7:1) CONFIG_VIDEO_MB >> 1,
* defined in mainboard/../Options.lb
* PLL Reference Clock Bypass(0) 0, Default
*/
@@ -57,7 +57,7 @@
* so we can add the real value in megabytes
*/
- wData = 0x0800 | (VIDEO_MB & VG_MEM_MASK);
+ wData = 0x0800 | (CONFIG_VIDEO_MB & VG_MEM_MASK);
vrWrite(wClassIndex, wData);
res = vrRead(wClassIndex);
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c 2006-09-20 16:39:30 UTC (rev 2430)
@@ -521,7 +521,7 @@
/* Report the memory regions */
idx = 10;
ram_resource(dev, idx++, 0, 640);
- ram_resource(dev, idx++, 1024, ((sizeram() - VIDEO_MB) * 1024) - SMM_SIZE - 1024);
+ ram_resource(dev, idx++, 1024, ((sizeram() - CONFIG_VIDEO_MB) * 1024) - SMM_SIZE - 1024);
}
assign_resources(&dev->link[0]);
Modified: trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/chip.h
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/chip.h 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/chip.h 2006-09-20 16:39:30 UTC (rev 2430)
@@ -1,11 +1,11 @@
-#ifndef _SOUTHBRIDGE_AMD_CS5536
-#define _SOUTHBRIDGE_AMD_CS5536
+#ifndef _SOUTHBRIDGE_AMD_CS5536_LX
+#define _SOUTHBRIDGE_AMD_CS5536_LX
#define MAX_UNWANTED_VPCI 10 /* increase if needed */
-extern struct chip_operations southbridge_amd_cs5536_ops;
+extern struct chip_operations southbridge_amd_cs5536_lx_ops;
-struct southbridge_amd_cs5536_config {
+struct southbridge_amd_cs5536_lx_config {
/* interrupt enable for LPC bus */
int lpc_serirq_enable; /* how to enable, e.g. 0x80 */
int lpc_irq; /* what to enable, e.g. 0x18 */
@@ -50,4 +50,4 @@
unsigned long unwanted_vpci[MAX_UNWANTED_VPCI];
};
-#endif /* _SOUTHBRIDGE_AMD_CS5536 */
+#endif /* _SOUTHBRIDGE_AMD_CS5536_LX */
Modified: trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/cs5536.c
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/cs5536.c 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/src/southbridge/amd/cs5536_lx/cs5536.c 2006-09-20 16:39:30 UTC (rev 2430)
@@ -158,7 +158,7 @@
static void southbridge_init(struct device *dev)
{
- struct southbridge_amd_cs5536_config *sb = (struct southbridge_amd_cs5536_config *)dev->chip_info;
+ struct southbridge_amd_cs5536_lx_config *sb = (struct southbridge_amd_cs5536_lx_config *)dev->chip_info;
msr_t msr;
int i;
@@ -316,14 +316,14 @@
.scan_bus = scan_static_bus,
};
-static struct pci_driver cs5536_pci_driver __pci_driver = {
+static struct pci_driver cs5536_lx_pci_driver __pci_driver = {
.ops = &southbridge_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_CS5536_ISA
};
-struct chip_operations southbridge_amd_cs5536_ops = {
- CHIP_NAME("AMD cs5536")
+struct chip_operations southbridge_amd_cs5536_lx_ops = {
+ CHIP_NAME("AMD cs5536 (LX)")
/* This only called when this device is listed in the
* static device tree.
*/
Modified: trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb 2006-09-20 16:32:59 UTC (rev 2429)
+++ trunk/LinuxBIOSv2/targets/digitallogic/msm800sev/Config.lb 2006-09-20 16:39:30 UTC (rev 2430)
@@ -8,7 +8,7 @@
## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
## (normal AND fallback images and payloads).
## leave 64k for vsa and 32K for video ROM
-option ROM_SIZE = 1024*256 - 64*1024 - 32 * 1024
+option ROM_SIZE = 1024*1024 - 64*1024 - 32 * 1024
## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
## not including any payload.