Hello John,
On Mon, Aug 17, 2020 at 11:31 PM john brown john.brown8943k@mail.com wrote:
Our new board has intel skylake I3-6100U CPU, BIOS use coreboot based on kabylake RVP7 it can boot linux OS successfully. but there are two issues:
Which mainboard do you have? *Is* your board an Intel Kaby Lake RVP7 reference board? If not, then it's expected that things don't work properly with a RVP7 image.
intel Ethernet PHY I211 connected on I3-U6100 PCIE lane 1, I211 is not shown in lspci.
and serial port log:
PCI: 00:1c.0 scanning... do_pci_scan_bridge for PCI: 00:1c.0 PCI: pci_scan_bus for bus 01 POST: 0x24 POST: 0x25 POST: 0x55 scan_bus: scanning of bus PCI: 00:1c.0 took 12591 usecs
In our previous version board, I211 is on PCIE lane 5, which is shown in lspci and works fine. and serial port log:
Sounds like you have custom mainboards. Instead of using a RVP image on them, I would recommend adding support for your boards to coreboot. You can even use the variants mechanism to account for differences between revisions. You can use https://doc.coreboot.org/tutorial/part2.html as a guide to submit patches upstream for review. Feel free to add me as a reviewer there.
PCI: 00:1c.0 scanning... do_pci_scan_bridge for PCI: 00:1c.0 PCI: pci_scan_bus for bus 01 POST: 0x24 PCI: 01:00.0 [8086/1539] enabled POST: 0x25 POST: 0x55 Capability: type 0x01 @ 0x40 Capability: type 0x05 @ 0x50 Capability: type 0x11 @ 0x70 Capability: type 0x10 @ 0xa0 Capability: type 0x10 @ 0x40 Enabling Common Clock Configuration PCIE CLK PM is not supported by endpoint ASPM: Enabled L1 Capability: type 0x01 @ 0x40 Capability: type 0x05 @ 0x50 Capability: type 0x11 @ 0x70 Capability: type 0x10 @ 0xa0 Failed to enable LTR for dev = PCI: 01:00.0 scan_bus: scanning of bus PCI: 00:1c.0 took 56231 usecs
A m.2 sata on pcie lane 11(sata 1B) doesn't work(not shown on lsblk). On the previous version board, sata is on PCIE lane 8 (1A) and works fine.
This is probably due to misconfigured settings, and related to the NIC problems. From what you've explained, looks like the new board revision uses different HSIO lanes, so the configuration needs to be adjusted accordingly. As explained before, adding support for your boards is probably the best option.
The following 3 files are changed for this new board from the previous version board .
1.IFWI configuration file settings,
devicetree.cb
gpio.h (SATAXPCIE1 detect)
It would be nice to see which changes are needed. This would be very easy if the code were public, e.g.: upstream or on review.
Thanks a lot for your help on any of these issue.
John _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
Best regards,
Angel Pons
-
Angel Pons -
john brown