Re: [coreboot] VGA rom doesn't work

[Alejandro Flores]

Thanks Youness, the vga works now.

On May 24, 2017 8:17 PM, "Youness Alaoui" 
wrote:
> Congratulations on getting the ME working again.
> Your VGA device is 8086,1616, so that's what you need to set. The
> 8086,0406 is probably just the default one in coreboot, but you still
> have to configure it.
> In 'make menuconfig', go to Devices menu and set the "VGA Device ID"
> to "8086,1616", then recompile, and it will work.
> I had the exact same issue . Search for "VGA" in this blog post to
> read about it (I didn't say much about it other than what I just said)
> : https://puri.sm/posts/librem-13-coreboot-report-february-3rd-2017/
>
> Good luck,
> Youness.
>
> On Wed, May 24, 2017 at 7:50 PM, Alejandro Flores 
> wrote:
> > Now that my ME problem is solved I turn to another problem.
> >
> > The video bios does not seem to function. During seabios boot screen no
> > video is displayed. Only when grub auto loads does the video start.
> >
> > When I use cbfstool auron_yuna.bin print
> > it shows pci8086,0406.rom at offset 0x7004c0
> >
> > However when I check lspci -n it shows an address of 8086:1616 for pci
> > device 00.02.0 VGA compatible controller.
> >
> > Which of these should I use for coreboot VGA device PCI ID?