Thanks Youness, the vga works now.
On May 24, 2017 8:17 PM, "Youness Alaoui" kakaroto@kakaroto.homelinux.net wrote:
Congratulations on getting the ME working again. Your VGA device is 8086,1616, so that's what you need to set. The 8086,0406 is probably just the default one in coreboot, but you still have to configure it. In 'make menuconfig', go to Devices menu and set the "VGA Device ID" to "8086,1616", then recompile, and it will work. I had the exact same issue . Search for "VGA" in this blog post to read about it (I didn't say much about it other than what I just said) : https://puri.sm/posts/librem-13-coreboot-report-february-3rd-2017/
Good luck, Youness.
On Wed, May 24, 2017 at 7:50 PM, Alejandro Flores af49880@gmail.com wrote:
Now that my ME problem is solved I turn to another problem.
The video bios does not seem to function. During seabios boot screen no video is displayed. Only when grub auto loads does the video start.
When I use cbfstool auron_yuna.bin print it shows pci8086,0406.rom at offset 0x7004c0
However when I check lspci -n it shows an address of 8086:1616 for pci device 00.02.0 VGA compatible controller.
Which of these should I use for coreboot VGA device PCI ID?
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot