Congratulations on getting the ME working again.
Your VGA device is 8086,1616, so that's what you need to set. The
8086,0406 is probably just the default one in coreboot, but you still
have to configure it.
In 'make menuconfig', go to Devices menu and set the "VGA Device ID"
to "8086,1616", then recompile, and it will work.
I had the exact same issue . Search for "VGA" in this blog post to
read about it (I didn't say much about it other than what I just said)
: https://puri.sm/posts/librem-13-coreboot-report-february- 3rd-2017/
Good luck,
Youness.
On Wed, May 24, 2017 at 7:50 PM, Alejandro Flores <af49880@gmail.com> wrote:
> Now that my ME problem is solved I turn to another problem.
>
> The video bios does not seem to function. During seabios boot screen no
> video is displayed. Only when grub auto loads does the video start.
>
> When I use cbfstool auron_yuna.bin print
> it shows pci8086,0406.rom at offset 0x7004c0
>
> However when I check lspci -n it shows an address of 8086:1616 for pci
> device 00.02.0 VGA compatible controller.
>
> Which of these should I use for coreboot VGA device PCI ID?
>
> --
> coreboot mailing list: coreboot@coreboot.org
> https://mail.coreboot.org/mailman/listinfo/coreboot