Hi all,
i have a strong problem that im not able to boot any os wit coreboot, it starts (linux) ut it hangs after 128 sec.
Anyone any ideas
Marc
On Tue, Jun 8, 2010 at 1:55 PM, mbertens mbertens@xs4all.nl wrote:
Hi all,
i have a strong problem that im not able to boot any os wit coreboot, it starts (linux) ut it hangs after 128 sec.
Anyone any ideas
I think you'd get a better response if you gave a little more information:
1. Have you ever been able to boot Linux with Coreboot? If yes, what revision? Have you checked to see what revision broke it?
2. What loader are you using? I know I could tell by going to the link, but more information in the mail helps generate interest enough to follow the link.
3.... Anything else you think is relevant.
Thanks, Myles
On Wed, 2010-06-09 at 08:25 -0600, Myles Watson wrote:
On Tue, Jun 8, 2010 at 1:55 PM, mbertens mbertens@xs4all.nl wrote:
Hi all,
i have a strong problem that im not able to boot any os wit coreboot, it starts (linux) ut it hangs after 128 sec.
Anyone any ideas
I think you'd get a better response if you gave a little more information:
- Have you ever been able to boot Linux with Coreboot? If yes, what
revision? Have you checked to see what revision broke it?
- What loader are you using? I know I could tell by going to the
link, but more information in the mail helps generate interest enough to follow the link.
3.... Anything else you think is relevant.
Thanks, Myles
I was able to boot coreboot, with multiple revisions but none of the will boot anymore, bacially like the boot log i provided, but i'm lost at the moment. I don't known any more where to look for the problem.
I'm currently booting the latest revision, that was ok, and also an earlier revistion was booting fine, but now not any more.
Marc
On Thu, Jun 10, 2010 at 12:13 PM, mbertens mbertens@xs4all.nl wrote:
On Wed, 2010-06-09 at 08:25 -0600, Myles Watson wrote:
On Tue, Jun 8, 2010 at 1:55 PM, mbertens mbertens@xs4all.nl wrote:
Hi all,
i have a strong problem that im not able to boot any os wit coreboot, it starts (linux) ut it hangs after 128 sec.
Anyone any ideas
I think you'd get a better response if you gave a little more information:
- Have you ever been able to boot Linux with Coreboot? If yes, what
revision? Have you checked to see what revision broke it?
- What loader are you using? I know I could tell by going to the
link, but more information in the mail helps generate interest enough to follow the link.
3.... Anything else you think is relevant.
Thanks, Myles
I was able to boot coreboot, with multiple revisions but none of the will boot anymore, bacially like the boot log i provided, but i'm lost at the moment. I don't known any more where to look for the problem.
I'm currently booting the latest revision, that was ok, and also an earlier revistion was booting fine, but now not any more.
Do you have an earlier (working) log to compare with?
Have you always gotten these errors? ERROR: PNP: 03f0.7 60 io size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 62 io size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 70 irq size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 72 irq size: 0x0000000001 not assigned
Thanks, Myles
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
Hi all,
an update: I installed a secondary build system (ubuntu), i build everything from scratch; seabios and coreboot r5575, r5600 and r5631, all these where working fine. But booting them all failed.
I tried everything i could think of; 1. Swapped hardware; memory, system board, harddisks, ide-controller (pri. versus sec.). 2. Swapped development systems (debian versus ubuntu) 3.
I attached two bootlogs. for analise 1. with 80Gb harddisk. - up to 7 secs in the boot process all is fine - then 120 secs of silence, and last the message from udevd 2. with 1Gb compact flash disk (which has a DMA problem, but its able to boot futher in the Linux boot secuence. - up to 6 secs in the boot process all is fine - then 120 secs are lost to the DMA problem of the CF card, the system booted before with de DMA failures just fine it takes only 120 secs extra. - then 120 secs of silence, and the message from udevd - then some more output on starting the cardbus and others. - final message adding the swap on /dev/hda5 and then silence again.
I hope that anyone can help me with this silly problem, please don't just throw a term through the mail, like "fix the DMA problem", but give some pointers how to solve it in my configuration.
Marc
On Fri, 2010-06-11 at 20:43 +0200, mbertens wrote:
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
The second bootlog
On Sun, 2010-06-13 at 11:30 +0200, mbertens wrote:
Hi all,
an update: I installed a secondary build system (ubuntu), i build everything from scratch; seabios and coreboot r5575, r5600 and r5631, all these where working fine. But booting them all failed.
I tried everything i could think of;
- Swapped hardware; memory, system board, harddisks, ide-controller
(pri. versus sec.). 2. Swapped development systems (debian versus ubuntu) 3.
I attached two bootlogs. for analise
- with 80Gb harddisk.
- up to 7 secs in the boot process all is fine
- then 120 secs of silence, and last the message from udevd
- with 1Gb compact flash disk (which has a DMA problem, but its able to
boot futher in the Linux boot secuence.
- up to 6 secs in the boot process all is fine
- then 120 secs are lost to the DMA problem of the CF card, the system
booted before with de DMA failures just fine it takes only 120 secs extra.
- then 120 secs of silence, and the message from udevd
- then some more output on starting the cardbus and others.
- final message adding the swap on /dev/hda5 and then silence again.
I hope that anyone can help me with this silly problem, please don't just throw a term through the mail, like "fix the DMA problem", but give some pointers how to solve it in my configuration.
Marc
On Fri, 2010-06-11 at 20:43 +0200, mbertens wrote:
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
> Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Hi all,
did some extra tests, with crossgcc, it did change anything.
Marc
On Sun, 2010-06-13 at 11:34 +0200, mbertens wrote:
The second bootlog
On Sun, 2010-06-13 at 11:30 +0200, mbertens wrote:
Hi all,
an update: I installed a secondary build system (ubuntu), i build everything from scratch; seabios and coreboot r5575, r5600 and r5631, all these where working fine. But booting them all failed.
I tried everything i could think of;
- Swapped hardware; memory, system board, harddisks, ide-controller
(pri. versus sec.). 2. Swapped development systems (debian versus ubuntu) 3.
I attached two bootlogs. for analise
- with 80Gb harddisk.
- up to 7 secs in the boot process all is fine
- then 120 secs of silence, and last the message from udevd
- with 1Gb compact flash disk (which has a DMA problem, but its able to
boot futher in the Linux boot secuence.
- up to 6 secs in the boot process all is fine
- then 120 secs are lost to the DMA problem of the CF card, the system
booted before with de DMA failures just fine it takes only 120 secs extra.
- then 120 secs of silence, and the message from udevd
- then some more output on starting the cardbus and others.
- final message adding the swap on /dev/hda5 and then silence again.
I hope that anyone can help me with this silly problem, please don't just throw a term through the mail, like "fix the DMA problem", but give some pointers how to solve it in my configuration.
Marc
On Fri, 2010-06-11 at 20:43 +0200, mbertens wrote:
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
> > Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
My only suggestion is to boot Linux with the factory BIOS, then shut it down completely and cold boot with Coreboot. I've had that work before when nothing else would. I'd love to track it down, but I haven't yet.
Thanks, Myles
Hi all,
A new boot log but now with freeBSD.
It seems to me that the memory gets trashed by something, but what?
FreeBSD is able too boot, but encouters a interrupt storm. Normally this is due to faulty PIRQ table, and the only thing that i can think of is that the memory table gets trashed too.
Anyone having any ideas.....
On Sun, 2010-06-13 at 11:34 +0200, mbertens wrote:
The second bootlog
On Sun, 2010-06-13 at 11:30 +0200, mbertens wrote:
Hi all,
an update: I installed a secondary build system (ubuntu), i build everything from scratch; seabios and coreboot r5575, r5600 and r5631, all these where working fine. But booting them all failed.
I tried everything i could think of;
- Swapped hardware; memory, system board, harddisks, ide-controller
(pri. versus sec.). 2. Swapped development systems (debian versus ubuntu) 3.
I attached two bootlogs. for analise
- with 80Gb harddisk.
- up to 7 secs in the boot process all is fine
- then 120 secs of silence, and last the message from udevd
- with 1Gb compact flash disk (which has a DMA problem, but its able to
boot futher in the Linux boot secuence.
- up to 6 secs in the boot process all is fine
- then 120 secs are lost to the DMA problem of the CF card, the system
booted before with de DMA failures just fine it takes only 120 secs extra.
- then 120 secs of silence, and the message from udevd
- then some more output on starting the cardbus and others.
- final message adding the swap on /dev/hda5 and then silence again.
I hope that anyone can help me with this silly problem, please don't just throw a term through the mail, like "fix the DMA problem", but give some pointers how to solve it in my configuration.
Marc
On Fri, 2010-06-11 at 20:43 +0200, mbertens wrote:
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
> > Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
I think you may well have interrupt configuration problems: There are messages in the boot log about interrupt storm, and dissabling interrupts, which will then basically fubar any disk access/ Dma. If you can boot Linux with options 'irqfixup irqpoll', it will start to give you pointers. A strong possibility is that the actual pins wired to the pci interrupts are misconfigured early on, resulting in a permenantly 'on' interrupt source. I would look carefully at the interrupt routing table, and also the PCI interrupt setup? Looking for things like interrupt overlap, misconfigured GPIO etc...
Hope this helps! Edwin
On 14 Jun 2010, at 21:40, "mbertens" mbertens@xs4all.nl wrote:
Hi all,
A new boot log but now with freeBSD.
It seems to me that the memory gets trashed by something, but what?
FreeBSD is able too boot, but encouters a interrupt storm. Normally this is due to faulty PIRQ table, and the only thing that i can think of is that the memory table gets trashed too.
Anyone having any ideas.....
On Sun, 2010-06-13 at 11:34 +0200, mbertens wrote:
The second bootlog
On Sun, 2010-06-13 at 11:30 +0200, mbertens wrote:
Hi all,
an update: I installed a secondary build system (ubuntu), i build everything from scratch; seabios and coreboot r5575, r5600 and r5631, all these where working fine. But booting them all failed.
I tried everything i could think of;
- Swapped hardware; memory, system board, harddisks, ide-controller
(pri. versus sec.). 2. Swapped development systems (debian versus ubuntu) 3.
I attached two bootlogs. for analise
- with 80Gb harddisk.
- up to 7 secs in the boot process all is fine
- then 120 secs of silence, and last the message from udevd
- with 1Gb compact flash disk (which has a DMA problem, but its
able to boot futher in the Linux boot secuence.
- up to 6 secs in the boot process all is fine
- then 120 secs are lost to the DMA problem of the CF card, the
system booted before with de DMA failures just fine it takes only 120 secs extra.
- then 120 secs of silence, and the message from udevd
- then some more output on starting the cardbus and others.
- final message adding the swap on /dev/hda5 and then silence
again.
I hope that anyone can help me with this silly problem, please don't just throw a term through the mail, like "fix the DMA problem", but give some pointers how to solve it in my configuration.
Marc
On Fri, 2010-06-11 at 20:43 +0200, mbertens wrote:
On Thu, 2010-06-10 at 12:31 -0600, Myles Watson wrote:
>>> Anyone any ideas
Have you tried to boot the factory BIOS? Are these all cold boots? Did cold boot always work?
Thanks, Myles
I have two systems here on the table; 1.A. original BIOS (insyde) boots just fine with FreeBSD B with external ROM on the JDEBUG connector (see http://www.coreboot.org/Tutorials:Nokia_IP530#J-DEBUG ) im not able to boot coreboot (R5628 or 5600 with my patches which worked before). 2. The on-board flash contains R5512 that does not boot as well and this one booted before too.
So as you can understand i'm a little lost
I tried adding bayou with payloads seabios and coreinfo, seabios is starting as before, but coreinfo doesn't do anything.
Marc
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
<dump.log>
coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
On Thu, 2010-06-10 at 12:25 -0600, Myles Watson wrote:
On Thu, Jun 10, 2010 at 12:13 PM, mbertens mbertens@xs4all.nl wrote:
On Wed, 2010-06-09 at 08:25 -0600, Myles Watson wrote:
On Tue, Jun 8, 2010 at 1:55 PM, mbertens mbertens@xs4all.nl wrote:
Hi all,
i have a strong problem that im not able to boot any os wit coreboot, it starts (linux) ut it hangs after 128 sec.
Anyone any ideas
I think you'd get a better response if you gave a little more information:
- Have you ever been able to boot Linux with Coreboot? If yes, what
revision? Have you checked to see what revision broke it?
- What loader are you using? I know I could tell by going to the
link, but more information in the mail helps generate interest enough to follow the link.
3.... Anything else you think is relevant.
Thanks, Myles
I was able to boot coreboot, with multiple revisions but none of the will boot anymore, bacially like the boot log i provided, but i'm lost at the moment. I don't known any more where to look for the problem.
I'm currently booting the latest revision, that was ok, and also an earlier revistion was booting fine, but now not any more.
Do you have an earlier (working) log to compare with?
Have you always gotten these errors? ERROR: PNP: 03f0.7 60 io size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 62 io size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 70 irq size: 0x0000000001 not assigned ERROR: PNP: 03f0.7 72 irq size: 0x0000000001 not assigned
Thanks, Myles
Yes these errors where there always, it never botherd the system, but there should be resolved at some point, but i tried to find the problem, but didn't find it
Marc
-
Edwin Beasant -
mbertens -
Myles Watson