Re: [LinuxBIOS] Ck804 PCI-E External Plugin Causes Failure

[Lu, Yinghai]

Do you need PCI bridge etc?

Try to disable the PCI bridge on your MB Config.lb.

YH

________________________________

From: [e-mail]
[mailto:[e-mail]] On Behalf Of steve yannalfo
Sent: Thursday, September 28, 2006 9:26 AM
To: [e-mail]
Subject: [LinuxBIOS] Ck804 PCI-E External Plugin Causes Failure

My System seems to running good. My devices are found, onboard vga comes
up @ kernel setfont, lans detected and working, amd8132 working etc. The
problem is when I plug in  a pci-e card on the ck804 external  pci-e
connector. LB dies @:
----------------------------------
scan_static_bus for PCI: 04:01.1 done
do_pci_scan_bridge for PCI: 04:09.0
PCI: Scanning Bus 5
<<DEAD HERE>>
----------------------------------

localhost ~ # lspci -t
-+-[0000:04]-+-00.0
 |           +-01.0
 |           +-01.1
 |           +-02.0
 |           +-02.1
 |           +-04.0
 |           +-04.1
 |           +-06.0
 |           +-07.0
 |           +-08.0
 |           +-09.0-[0000:05]--                  <<<< TERMINATED
 |           +-0a.0
 |           +-0b.0-[0000:06]----00.0
 |           +-0c.0-[0000:07]--
 |           +-0d.0-[0000:08]----00.0
 |           -0e.0-[0000:09]--                  <<<< EXTERNAL PCI-E
 +-[0000:01]-+-01.0-[0000:02]----0c.0
 |           +-01.1
 |           +-02.0-[0000:03]----01.0
 |           -02.1
 -[0000:00]-+-18.0
             +-18.1
             +-18.2
             +-18.3
             +-19.0
             +-19.1
             +-19.2
             -19.3

So, LB is scanning 04:09.0 which is BUS-5 which is terminated on the MB
because not used.
The External PCI-E is on 4:0e.0... so why is LB crashing on 4:09.0 if I
plug a card into 04:0e.0?

please help
tia
steve

________________________________

How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call
rates.
http://us.rd.yahoo.com/mail_us/taglines/postman8/*http:/us.rd.yahoo.com
/evt=39663/*http:/voice.yahoo.com