Do you need PCI bridge etc?
Try to disable the PCI bridge on your MB
Config.lb.
YH
From:
linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of steve yannalfo
Sent: Thursday, September 28, 2006
9:26 AM
To: linuxbios@linuxbios.org
Subject: [LinuxBIOS] Ck804 PCI-E
External Plugin Causes Failure
My System seems to
running good. My devices are found, onboard vga comes up @ kernel setfont, lans
detected and working, amd8132 working etc. The problem is when I plug in
a pci-e card on the ck804 external pci-e connector. LB dies @:
----------------------------------
scan_static_bus for PCI: 04:01.1 done
do_pci_scan_bridge for PCI: 04:09.0
PCI: Scanning Bus 5
<<DEAD HERE>>
----------------------------------
localhost ~ # lspci -t
-+-[0000:04]-+-00.0
| +-01.0
| +-01.1
| +-02.0
| +-02.1
| +-04.0
| +-04.1
| +-06.0
| +-07.0
| +-08.0
|
+-09.0-[0000:05]--
<<<< TERMINATED
| +-0a.0
|
+-0b.0-[0000:06]----00.0
|
+-0c.0-[0000:07]--
|
+-0d.0-[0000:08]----00.0
|
\-0e.0-[0000:09]--
<<<< EXTERNAL PCI-E
+-[0000:01]-+-01.0-[0000:02]----0c.0
| +-01.1
|
+-02.0-[0000:03]----01.0
| \-02.1
\-[0000:00]-+-18.0
+-18.1
+-18.2
+-18.3
+-19.0
+-19.1
+-19.2
\-19.3
So, LB is scanning 04:09.0 which is BUS-5 which is terminated on the MB because
not used.
The External PCI-E is on 4:0e.0... so why is LB crashing on 4:09.0 if I plug a
card into 04:0e.0?
please help
tia
steve
How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone
call rates.