Re: [coreboot] Lenovo Carbon X1

[Vladimir 'phcoder' Serbinenko]

I was unable to download as I'm not willing to give dropbox access to my
contacts and I'm too lazy to make a new account now. Anyway the culprit is
unsupported LPC. Here you go: https://review.coreboot.org/12820

Le Sat, Jan 2, 2016 à 1:39 AM, Vladimir 'phcoder' Serbinenko <
[e-mail]> a écrit :
> Please send me the full log archive so I can reproduce. Also note: X1
> carbon has soldered RAM which will need adjustements
>
> Le Sun, Dec 13, 2015 à 10:59 PM, Gerhard Gappmeier  a
> écrit :
> > Hi all,
> >
> > unfortunately autoport didn't work well.
> >
> > This is the output on the 1st run:
> >
> > Unsupported PCI device 8086:1e56
> >
> > Unknown PCI device 8086:0085, assuming removable
> >
> > panic: runtime error: invalid memory address or nil pointer dereference
> >
> > [signal 0xb code=0x1 addr=0x20 pc=0x40a157]
> >
> > goroutine 1 [running]:
> >
> > main.LenovoEC(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6,
> > 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
> >
> > /home/gergap/work/opensource/coreboot/util/autoport/ec_lenovo.go:20
> > +0x1d37
> >
> > main.ScanRoot(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6,
> > 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
> >
> > /home/gergap/work/opensource/coreboot/util/autoport/root.go:33 +0x52a
> >
> > main.main()
> >
> > /home/gergap/work/opensource/coreboot/util/autoport/main.go:727 +0x683
> >
> > On further runs the system freezes.
> >
> > To fix the tree again I run
> >
> > sudo -R gergap .
> >
> > git clean -fdx
> >
> > git reset --hard
> >
> > This way I could reproduce the above output.
> >
> > The created log files can be found here:
> >
> > https://www.dropbox.com/s/1r2dvbk7rj68fuv/logs.tar.gz?dl=0
> >
> > The created mainboard folder is not really useful,
> >
> > but if you are interested here is the patch:
> >
> > https://www.dropbox.com/s/2ejds3ppae0y5md/0001-Add-lenovo-thinkpad_x1_carbon...
> >
> > Any help is appreciated.
> >
> > On Sunday, December 13, 2015 07:52:31 PM you wrote:
> > > Try util/autoport and it can be easier.
> >
> > mfg,
> >
> > Gerhard Gappmeier