Re: [coreboot] Lenovo Carbon X1

[Gerhard Gappmeier]

Hi all,

unfortunately autoport didn't work well.

This is the output on the 1st run:
Unsupported PCI device 8086:1e56
Unknown PCI device 8086:0085, assuming removable
panic: runtime error: invalid memory address or nil pointer dereference
[signal 0xb code=0x1 addr=0x20 pc=0x40a157]

goroutine 1 [running]:
main.LenovoEC(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 
0x6, 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
        /home/gergap/work/opensource/coreboot/util/autoport/ec_lenovo.go:
20 +0x1d37
main.ScanRoot(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 
0x6, 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
        /home/gergap/work/opensource/coreboot/util/autoport/root.go:33 
+0x52a
main.main()
        /home/gergap/work/opensource/coreboot/util/autoport/main.go:727 
+0x683

On further runs the system freezes.
To fix the tree again I run
sudo -R gergap .
git clean -fdx
git reset --hard

This way I could reproduce the above output.

The created log files can be found here:
https://www.dropbox.com/s/1r2dvbk7rj68fuv/logs.tar.gz?dl=0

The created mainboard folder is not really useful,
but if you are interested here is the patch:
https://www.dropbox.com/s/2ejds3ppae0y5md/0001-Add-lenovo-thinkpad_x1_carbon...

Any help is appreciated.

On Sunday, December 13, 2015 07:52:31 PM you wrote:
> Try util/autoport and it can be easier.

Lenovo Carbon X1

[Vladimir 'phcoder' Serbinenko]

Please send me the full log archive so I can reproduce. Also note: X1
carbon has soldered RAM which will need adjustements

Le Sun, Dec 13, 2015 à 10:59 PM, Gerhard Gappmeier  a
écrit :
> Hi all,
>
> unfortunately autoport didn't work well.
>
> This is the output on the 1st run:
>
> Unsupported PCI device 8086:1e56
>
> Unknown PCI device 8086:0085, assuming removable
>
> panic: runtime error: invalid memory address or nil pointer dereference
>
> [signal 0xb code=0x1 addr=0x20 pc=0x40a157]
>
> goroutine 1 [running]:
>
> main.LenovoEC(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6,
> 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
>
> /home/gergap/work/opensource/coreboot/util/autoport/ec_lenovo.go:20 +0x1d37
>
> main.ScanRoot(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6,
> 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
>
> /home/gergap/work/opensource/coreboot/util/autoport/root.go:33 +0x52a
>
> main.main()
>
> /home/gergap/work/opensource/coreboot/util/autoport/main.go:727 +0x683
>
> On further runs the system freezes.
>
> To fix the tree again I run
>
> sudo -R gergap .
>
> git clean -fdx
>
> git reset --hard
>
> This way I could reproduce the above output.
>
> The created log files can be found here:
>
> https://www.dropbox.com/s/1r2dvbk7rj68fuv/logs.tar.gz?dl=0
>
> The created mainboard folder is not really useful,
>
> but if you are interested here is the patch:
>
> https://www.dropbox.com/s/2ejds3ppae0y5md/0001-Add-lenovo-thinkpad_x1_carbon...
>
> Any help is appreciated.
>
> On Sunday, December 13, 2015 07:52:31 PM you wrote:
> > Try util/autoport and it can be easier.
>
> mfg,
>
> Gerhard Gappmeier