Seabios stop at Harddisk boot.

The same Coreboot and the same board had boot Linux ok.

I try seabios then.  Vga has normal output on screen.

After I choose to boot from Harddisk, it stop at "fail
handle_15XX:314(00000086):"

Any idea about this?

------------------------------------------------------------------------
----------------------------------------------------------------

Copying ACPI RSDP from 1bef0000 to 000ff330

Found 1 cpu(s)

SMBIOS table addr=0x000ff350

ram_size=0x1bef0000

Scan for VGA option rom

Running option rom at 0000c000:00000003

Turning on vga console

Starting SeaBIOS

keyboard initialized

e820 map has 7 items:

0: 0000000000000000 - 0000000000004000 = 1

1: 0000000000004000 - 0000000000029000 = 2 (((((((((I reserved this,
can remove it if needed.))))))))))

2: 0000000000029000 - 000000000009fc00 = 1

3: 000000000009fc00 - 00000000000a0000 = 2

4: 00000000000f0000 - 0000000000100000 = 2

5: 0000000000100000 - 000000001bef0000 = 1

6: 000000001bef0000 - 000000001bf00000 = 2

final bios_table_addr: 0x000ff45a (used 48%)

ATA controller 0 at 000001f0/000003f0

ATA controller 1 at 00000170/00000370

ata1-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63

ata1 master: ST3120213A ATA-7 Hard-Disk (111 GiBytes)

ata1  slave: Unknown device

Scan for option roms

Press F12 for boot menu.

Select boot device:

1. Floppy

2. Hard Disk

3. CD-Rom

(((((((((I chose Hard Disk))))))))))

Changing serial settings was 00000003/00000002 now 00000003/00000000

enter handle_19:

NULL

Booting from Hard Disk...

Booting from 00000000:00007c00

enter handle_12:

a=00000000 b=00000000 c=00000000 d=00000080 si=00002118 di=0000402c

ds=00000000 es=00000000 ip=000024c1 cs=00000000 f=00000297 r=00001fd2

enter handle_12:

a=00000000 b=00000000 c=00000000 d=00022780 si=00002118 di=00054480

ds=00000000 es=00000000 ip=00008a01 cs=00000000 f=00000297 r=00001fd2

fail get_device:610(00000001):

a=00004100 b=000055aa c=fffabad4 d=00054581 si=00067fc8 di=00000081

ds=00000000 es=00000000 ip=000088b5 cs=00000000 f=00000246 r=00001fd2

fail get_device:610(00000001):

a=00000800 b=00000000 c=fffabad4 d=00054581 si=00067fc8 di=00000081

ds=00000000 es=00000000 ip=000088e9 cs=00000000 f=00000246 r=00001fd2

fail handle_15XX:314(00000086):

a=000000c0 b=00000000 c=fffaba03 d=00000001 si=00054538 di=00067fc8

ds=00000000 es=00000000 ip=00008ab6 cs=00000000 f=00000246 r=00001fd2

------------------------------------------------------------------------
------------------------------

[Rudolf Marek]

Hi,

Please retry with increased debug level (CONFIG_DEBUG_LEVEL). Please set it to 
bigger number like 9. Send the log here again.

I dont think you need to reserve 004000 - 0000000000029000 = 2
Should be ok without it.

Rudolf