The same Coreboot and the same board had boot Linux
ok.
I try seabios then. Vga has normal output on
screen.
After I choose to boot from Harddisk, it stop at “fail
handle_15XX:314(00000086):”
Any idea about this?
----------------------------------------------------------------------------------------------------------------------------------------
Copying ACPI RSDP from 1bef0000 to 000ff330
Found 1 cpu(s)
SMBIOS table addr=0x000ff350
ram_size=0x1bef0000
Scan for VGA option rom
Running option rom at
Turning on vga console
Starting SeaBIOS
keyboard initialized
e820 map has 7 items:
0: 0000000000000000 - 0000000000004000 = 1
1: 0000000000004000 - 0000000000029000 = 2 (((((((((I
reserved this, can remove it if needed.))))))))))
2: 0000000000029000 - 000000000009fc00 = 1
3: 000000000009fc00 -
4:
5: 0000000000100000 - 000000001bef0000 = 1
6: 000000001bef0000 - 000000001bf00000 = 2
final bios_table_addr: 0x000ff
ATA controller 0 at
ATA controller 1 at 00000170/00000370
ata1-0: PCHS=16383/16/63 translation=lba
LCHS=1024/255/63
ata1 master: ST
ata1 slave: Unknown device
Scan for option roms
Press F12 for boot menu.
Select boot device:
1. Floppy
2. Hard Disk
3. CD-Rom
(((((((((I chose Hard Disk))))))))))
Changing serial settings was 00000003/00000002 now
00000003/00000000
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 00000000:
enter handle_12:
a=00000000 b=
ds=00000000 es=00000000 ip=
enter handle_12:
a=00000000 b=
ds=00000000 es=00000000 ip=
fail get_device:610(00000001):
a=00004100 b=000055aa c=fffabad4 d=00054581
si=00067fc8 di=00000081
ds=00000000 es=00000000 ip=000088b5 cs=
fail get_device:610(00000001):
a=00000800 b=
ds=00000000 es=00000000 ip=000088e9 cs=
fail handle_15XX:314(00000086):
a=
ds=00000000 es=00000000
ip=00008ab6 cs=
------------------------------------------------------------------------------------------------------