Hi,
I am using 256kb BIOS flashrom, etherboot, and kernel image
on compact flash IDE .
I get this error in LinuxBIOS.
***Extract***
Copying IRQ routing tables to 0xf0000...done.
Verifing priq routing tables copy at 0xf0000...failed
Wrote linuxbios table at: 00000500 - 0000064c checksum b79a
***Extract***
When I try do read from 0xf0000 after copying, it does shows
0xff instead some value.
I had forced the sizeram to return 1MB less then the actual
Ramsize to make it work with etherboot.
When the kernel boots up, the ethernet interface does
not come up.
**Extract for the Linux kernel messaage**
eth0: RealTek RTL8139 Fast Ethernet at 0xc4800000, 00:30:02:09:02:93, IRQ 0
PCI: No IRQ known for interrupt pin A of device 01:05.0. Please try using pci=biosirq.
eth1: RealTek RTL8139 Fast Ethernet at 0xc4802000, 00:30:02:09:02:92, IRQ 0
**Extract for the Linux kernel messaage**
I have tried the checkpir,etc on the irq tables. It is OK
at the command prompt. But I still get this error.
Any suggestion on this.
Regards
Deepak
Regards
Deepak