coreboot

coreboot@coreboot.org

11 participants
39711 discussions

RE: Etherboot 5.2.4 + LinuxBIOS + e1000
by YhLu 05 Aug '04

05 Aug '04

I just sent you my tar ball of Etherboot, did you get that? Regards YH -----Original Message----- From: Hendricks David W. [mailto:dwh@lanl.gov] Sent: Thursday, August 05, 2004 2:42 PM To: linuxbios(a)clustermatic.org Subject: Etherboot 5.2.4 + LinuxBIOS + e1000 I need help with using Etherboot with LinuxBIOS to boot a Linux kernel over a network using an e1000 NIC and DHCP + TFTP. Using an old EEPro100 payload, I can get this far: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Searching for linuxbios tables... lb: ram start: 0000000000000BDC size: 000000000009F424 high: 00000000000A0000 lb: ram start: 00000000000C0000 size: 0000000000030000 high: 00000000000F0000 lb: ram start: 00000000000F0400 size: 000000003FF0FC00 high: 0000000040000000 base_mem_k = 640 high_mem_k = 1047552 ROM segment 0x0000 length 0x0000 reloc 0x9400 end 00000003:df08d339, start 00000002:f628d237 32-bit delta 3726 calibrate_tsc 32-bit result is 1152701 clocks_per_tick = 1152701 Etherboot 5.0.5eb1 (GPL) ELF (Multiboot) for [EEPRO100] bus 00, function C0, vendor 1022, device 1100 . . . bus 04, function 30, vendor 1002, device 4752 Probing...[EEPRO100]No adapter found Here is the output when I run "file" on the eepro100 payload: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linked, stripped This payload won't work since I have an e1000, not an eepro100. But when I use the e1000 ELF file generated by Etherbot 5.2.4 (make bin/e1000.elf) I get almost no useful output to help in troubleshooting: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Loading Etherboot version: 5.2.4 Here is the output when I run "file" on this payload: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linkedfile: corrupted section header size. Perhaps someone on this list can help me figure out what I am doing wrong? -- ***** DUSA LACSI-SW ***** _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

2 1

Etherboot 5.2.4 + LinuxBIOS + e1000
by Hendricks David W. 05 Aug '04

05 Aug '04

I need help with using Etherboot with LinuxBIOS to boot a Linux kernel over a network using an e1000 NIC and DHCP + TFTP. Using an old EEPro100 payload, I can get this far: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Searching for linuxbios tables... lb: ram start: 0000000000000BDC size: 000000000009F424 high: 00000000000A0000 lb: ram start: 00000000000C0000 size: 0000000000030000 high: 00000000000F0000 lb: ram start: 00000000000F0400 size: 000000003FF0FC00 high: 0000000040000000 base_mem_k = 640 high_mem_k = 1047552 ROM segment 0x0000 length 0x0000 reloc 0x9400 end 00000003:df08d339, start 00000002:f628d237 32-bit delta 3726 calibrate_tsc 32-bit result is 1152701 clocks_per_tick = 1152701 Etherboot 5.0.5eb1 (GPL) ELF (Multiboot) for [EEPRO100] bus 00, function C0, vendor 1022, device 1100 . . . bus 04, function 30, vendor 1002, device 4752 Probing...[EEPRO100]No adapter found Here is the output when I run "file" on the eepro100 payload: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linked, stripped This payload won't work since I have an e1000, not an eepro100. But when I use the e1000 ELF file generated by Etherbot 5.2.4 (make bin/e1000.elf) I get almost no useful output to help in troubleshooting: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Loading Etherboot version: 5.2.4 Here is the output when I run "file" on this payload: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linkedfile: corrupted section header size. Perhaps someone on this list can help me figure out what I am doing wrong? -- ***** DUSA LACSI-SW *****

1 0

Re: AMD Solo target : linuxbios image too big?
by Stefan Reinauer 05 Aug '04

05 Aug '04

* Jay Miller <jmiller(a)actuality-systems.com> [040804 16:29]: > Anyone know what was added to the AMD Solo image that bumped it up over > 65536? I suspect it was the latest romcc changes, but I don't know. Try lowering MAXIMUM_CONSOLE_LOGLEVEL and DEFAULT_CONSOLE_LOGLEVEL to 7 (instead of 8). This will make it compile again. We should really get C-A-R in... Stefan

2 1

RE: AMD Solo target : linuxbios image too big?
by Jay Miller 04 Aug '04

04 Aug '04

That did the trick, thanks! Jay Miller Actuality Systems, Inc. jmiller(a)acutality-systems.com -----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Wednesday, August 04, 2004 2:31 PM To: Jay Miller Cc: linuxbios(a)clustermatic.org Subject: Re: AMD Solo target : linuxbios image too big? * Jay Miller <jmiller(a)actuality-systems.com> [040804 16:29]: > Anyone know what was added to the AMD Solo image that bumped it up over > 65536? I suspect it was the latest romcc changes, but I don't know. Try lowering MAXIMUM_CONSOLE_LOGLEVEL and DEFAULT_CONSOLE_LOGLEVEL to 7 (instead of 8). This will make it compile again. We should really get C-A-R in... Stefan

1 0

AMD Solo target : linuxbios image too big?
by Jay Miller 04 Aug '04

04 Aug '04

Anyone know what was added to the AMD Solo image that bumped it up over 65536? Thanks, Jay Miller 781-229-7812x117 Actuality Systems, Inc. jmiller(a)acutality-systems.com

1 0

DiskOnChip 16M part OK?
by Tom Warren 02 Aug '04

02 Aug '04

Has anyone used the 16MB DOC (8MB is discontinued) on the PCCHIPS M810LMR board with the default pcchips config? Or is there anything I need to change & recompile for the larger part? Thanks, - Tom NVIDIA -----Original Message----- From: linuxbios-admin(a)clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of ron minnich Sent: Monday, August 02, 2004 1:16 PM To: Stephen.Kimball(a)bench.com Cc: linuxbios(a)clustermatic.org Subject: Re: Freebios2 amd/serenade keyboard init error On Wed, 28 Jul 2004 Stephen.Kimball(a)bench.com wrote: > I have built LinuxBIOS for the amd/serenade target and I get about 600 > lines of good output to the serial port, which ends with > > > > Initializing devices... > > PCI: 00:18.0 init > > PCI: 00:18.3 init > > NB: Function 3 Misc Control.. done. > > PCI: 00:19.0 init > > PCI: 00:19.3 init > > NB: Function 3 Misc Control.. done. > > PCI: 01:01.0 init > > PCI: 01:02.0 init > > PNP: 002e.0 init > > PNP: 002e.2 init > > PNP: 002e.5 init > > POST: 0x00 > > POST: 0x00 > > POST: 0x00 > > POST: 0x00 > > POST: 0x00 > > POST: 0x00 > > > > The last line "POST: 0x00" repeats forever. PC80/keyboard.c is trying > to initialize the keyboard. The code that is running is > > > > /* empty input buffer or any other command/data will be > lost */ > > while ((inb(0x64) & 0x02)) > > post_code(0); > > > > The inb(0x64) reads 0xff forever. I heard that the keyboard > initialization may not be needed. > > How can I fix this? Thanks. As was noted earlier on this list, that keyboard controller part is "seriously fucked up" on that board. for now, turn off the keyboard, there's something wrong on that mobo we have not worked out. Second, write user-mode linux programs to try to get that stupid part to work, and see what is wrong. ron p.s. note I am back, but under really bizarre circumstances, as you can tell by the line at the end of this note. ***** DUSA LACSI-HW ***** _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

2 1

Re: AMD Serenade: Filo can't find/access ATA HD (IDE - /dev/hda)
by Ken Fuchs 02 Aug '04

02 Aug '04

> On Mon, 2 Aug 2004, Ken Fuchs wrote: > > Filo returns: > > > > 753. file_open: dev=hda3, path=/boot/vmlinuz > > 754. find_ide_controller: PCI IDE #0 not found > > 755. IDE channel 0 not found > > 756. devopen: failed to open ide "Hendricks David W." Wrote: > Try FILO 0.4.2 if you aren't using it already. It should incorporate a > PCI scanning fix that Stefan posted a while back (August?). Sorry, I forgot to mention that filo 0.4.2 was being used when the above error occurred. Ken Fuchs <kfuchs(a)winternet.com>

2 1

Freebios2 amd/serenade keyboard init error
by Stephen.Kimball＠bench.com 02 Aug '04

02 Aug '04

I have built LinuxBIOS for the amd/serenade target and I get about 600 lines of good output to the serial port, which ends with Initializing devices... PCI: 00:18.0 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. PCI: 01:01.0 init PCI: 01:02.0 init PNP: 002e.0 init PNP: 002e.2 init PNP: 002e.5 init POST: 0x00 POST: 0x00 POST: 0x00 POST: 0x00 POST: 0x00 POST: 0x00 The last line "POST: 0x00" repeats forever. PC80/keyboard.c is trying to initialize the keyboard. The code that is running is /* empty input buffer or any other command/data will be lost */ while ((inb(0x64) & 0x02)) post_code(0); The inb(0x64) reads 0xff forever. I heard that the keyboard initialization may not be needed. How can I fix this? Thanks. Steve

3 2

via flash_on utility
by zhu shi song 02 Aug '04

02 Aug '04

Dear lists, flasn_on utility is just for sis630 chipset. Is there any similar utility for via 8601/686b chipset? tks zhu __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

1 0

Linux from NTLDR
by Digital Infra, Inc. 31 Jul '04

31 Jul '04

(Doublely posted to Grub and LinuxBIOS ML. Tell me which is appropriate.) Hello. I am working on booting Linux from NTLDR. I mean, you dont have to install a Grub on your MBR. Check this: http://denbbs.angelskyarea.com/YaBB.cgi?board=discuss;action=display;num= 1087892282;start=180 First, I want to hear your opinion about it. And I appriciate much if you give me even hints of development. Second, Do you know a small Linux kernel build which runs as one relocatable binary file? In other words, vmlinux.com. Of course, I use .com here as not internet, but MS-DOS word. Okajima, Jun. Digital Infra, Inc. Tokyo, Japan. (Japanese native can mail me directly with Japanese lang.)

3 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot