Re: AMD Serenade: Filo can't find/access ATA HD (IDE - /dev/hda)

[Ken Fuchs]

> On Mon, 2 Aug 2004, Ken Fuchs wrote:
> > Filo returns:
> > file_open: dev=hda3, path=/boot/vmlinuz
> > find_ide_controller: PCI IDE #0 not found
> > IDE channel 0 not found
> > devopen: failed to open ide

"Hendricks David W." Wrote:
> Try FILO 0.4.2 if you aren't using it already. It should incorporate a 
> PCI scanning fix that Stefan posted a while back (August?).

Sorry, I forgot to mention that filo 0.4.2 was being used when the
above error occurred.

Ken Fuchs

AMD Serenade: Filo can't find/access ATA HD (IDE - /dev/hda)

[Hendricks David W.]

Is PCI_BRUTE_SCAN = 1 set in your FILO Config file?

On Mon, 2 Aug 2004, Ken Fuchs wrote:
> > On Mon, 2 Aug 2004, Ken Fuchs wrote:
> > > Filo returns:
> > > file_open: dev=hda3, path=/boot/vmlinuz
> > > find_ide_controller: PCI IDE #0 not found
> > > IDE channel 0 not found
> > > devopen: failed to open ide
>
> "Hendricks David W." Wrote:
> > Try FILO 0.4.2 if you aren't using it already. It should incorporate a 
> > PCI scanning fix that Stefan posted a while back (August?).
>
> Sorry, I forgot to mention that filo 0.4.2 was being used when the
> above error occurred.
>
> Ken Fuchs 
> _______________________________________________
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios