coreboot June 2016

coreboot@coreboot.org

43 participants
86 discussions

Start a nNew thread

New on blogs.coreboot.org: [GSoC] Better RISC-V support, week #3
by WordPress 13 Jun '16

13 Jun '16

1 0

Re: [coreboot] ifwitool: Incorrect calculation of dst_size
by Rolf Evers-Fischer 13 Jun '16

13 Jun '16

Hello Furquan, On Mon, 13 Jun 2016, Furquan Shaikh wrote: > Hello Rolf, > Thanks for the fix! Yes, the correction looks good. Please feel free to push > this change to gerrit on coreboot.org. > thank you for your fast reply. I will try to push this change. Best regards, Rolf

1 0

ifwitool: Incorrect calculation of dst_size
by Rolf Evers-Fischer 13 Jun '16

13 Jun '16

Dear Furquan, it seems to me that there is a slight formal mistake in calculation of dst_size, which causes the ifwitool to crash. I was able to fix it on my own with the following patch, which moves the closing bracket one line ahead: diff --git a/util/cbfstool/ifwitool.c b/util/cbfstool/ifwitool.c index 7fca542..a1365bd 100644 --- a/util/cbfstool/ifwitool.c +++ b/util/cbfstool/ifwitool.c @@ -1679,8 +1679,8 @@ static enum ifwi_ret ifwi_dir_replace(int type) } struct buffer dst; - size_t dst_size = buffer_size(&ifwi_image.subpart_buf[type] + - buffer_size(&b) - s->e[i].length); + size_t dst_size = buffer_size(&ifwi_image.subpart_buf[type]) + + buffer_size(&b) - s->e[i].length; size_t subpart_start = s->e[i].offset; size_t subpart_end = s->e[i].offset + s->e[i].length; Could you please confirm if this correction is okay? Best regards, Rolf

2 1

Not running GbE interface.
by 김유석 책임연구원 13 Jun '16

13 Jun '16

Dear Sir. My EVB is Rangeley Mohon peak. I was successfuly build and boot the coreboot on my EVB. But, not running the GbE interface. So, I was try to find the mailing list . and Got a some threads. *1. **Message for **G**bE(**This is **perfectly same **that my issue**)* https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html => But this mail is not include detail procedure.(some link a brokened.) Anyway. got a important thing. That "Must need a descriptor.bin". *2. descripter.bin * https://www.coreboot.org/pipermail/coreboot/2015-March/079532.html => This message recommand that It is easy, the descripter.bin is extract from ADI's coreboot binary. But i don't have a idea to extract from ADI's coreboot binary. Please advise to me. thank you.

1 0

Re: [coreboot] thinkpad t430s bios eeprom location
by Zaolin 12 Jun '16

12 Jun '16

Hi, I did that more than 2 times with different Thinkpads. Just flash coreboot in order to access the EEPROM via i2c in operating system (see. i2c-tools). That's the easiest way I guess. Best Regards Zaolin On 06/11/2016 10:15 PM, Peter Stuge wrote: > Anthony Martin wrote: >> what's the best way to attach to the WSON without desoldering it? >> I don't really want to remove it but I will if necessary. > Try soldering wires to the pads on the mainboard, but be prepared that it > might not really work out. > > The WSON packages usually have an exposed center pad, so you'll need > quite a bit of heat to get it off. Probably easiest with hot air. > > > //Peter >

1 0

thinkpad t430s bios eeprom location
by Anthony Martin 11 Jun '16

11 Jun '16

Does anyone know where the BIOS EEPROM is on the Thinkpad T430s? I've found an image online that shows the chip in a specific location but I'm looking at a board that must be a different revision because it's clearly not there. Cheers, Anthony

3 3

X230 at coreboot conference.
by ron minnich 11 Jun '16

11 Jun '16

I'm bringing an x230 to the conference next week in hopes that someone can help me flash it ... I've failed every time so far. And, I'll have a bunch of gear at the swap table, so if you flash the x230, you can take your pick of it :-) ron

1 0

New on blogs.coreboot.org: [GSOC] Panic Room, week #2
by WordPress 11 Jun '16

11 Jun '16

1 0

Re: [coreboot] display a picture using libpayload fuctions
by Julius Werner 10 Jun '16

10 Jun '16

> > I wanna build a payload using libpayload (Lpgcc). > I wanna dsiplay a picture . > Is there a function in libpayload doing this ? > You want to take a look at payloads/libpayload/drivers/video/graphics.c. It contains functions that can display BMP files.

1 0

account for lava hardware testing
by Alexander Couzens 09 Jun '16

09 Jun '16

hi, I would like to integrate gerrit into my jenkins to build coreboot and do hardware tests with lava. The jenkins can built a coreboot image and deploy + test the image via lava on a device (currently only x60). It's based on two jenkins job 1. compile coreboot | 2. run lava job and wait for it's completion But I would like also allow gerrit users to add a Lava user which triggers a job on jenkins and get an result in the end. https://jenkins.fe80.eu/ jenkins config in .yml with jenkins job builder: https://code.fe80.eu/lynxis/coreboot-jenkins-jobs coreboot.config and lava job.yml used by jenkins jobs: https://code.fe80.eu/lynxis/coreboot-configs best, lynxis ps. it's github auth if somebody want access, just ask. -- Alexander Couzens mail: lynxis(a)fe80.eu jabber: lynxis(a)fe80.eu mobile: +4915123277221 gpg: 390D CF78 8BF9 AA50 4F8F F1E2 C29E 9DA6 A0DF 8604

1 1

← Newer
1
2
3
4
5
6
7
8
9
Older →

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot June 2016