coreboot October 2016

coreboot@coreboot.org

55 participants
148 discussions

Re: [coreboot] southbridge/intel/i82801gx/i82801gx.h
by Riko Ho 17 Oct '16

17 Oct '16

continuing the chat, for displaying "Hello world" on serial #define CLKIN_DEV PNP_DEV(0x2e, IT8718F_GPIO) void mainboard_romstage_entry(unsigned long bist) { ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); .... How can I write "Hello world !" ? and where ? Could it be : ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); printk(" HELLO WORLD ! FROM COREBOOT..."); ......

1 0

Re: [coreboot] Diassemble i946GZ ?
by Antonius Riko 16 Oct '16

16 Oct '16

I can't build serialICE, here's the log : 10:30:14 AM) bianchi: on serialICE Mainboard Intel D946GZIS ...ROM 512K ...make menuconfig (10:30:35 AM) bianchi: Kconfig:438:warning: defaults for choice values not supported (10:30:35 AM) bianchi: # (10:30:35 AM) bianchi: # configuration written to .config (10:30:35 AM) bianchi: # (10:30:35 AM) bianchi: *** End of SerialICE configuration. (10:30:35 AM) bianchi: *** Execute 'make' to build or try 'make help'. (10:31:00 AM) bianchi: I can not do make...does anyone have a clue ? (10:31:33 AM) bianchi: bianchi@ubuntu:~/serialice/SerialICE$ make (10:31:33 AM) bianchi: make: Nothing to be done for 'all'

1 0

Re: [coreboot] Diassemble i946GZ ?
by Iru Cai 16 Oct '16

16 Oct '16

It's in SerialICE project, not in coreboot project. On 2016年10月17日 10:23, Antonius Riko wrote: > I can not see > D946GZIS > > on my src/mainboard/intel ....where is it ? > > >

1 0

Re: [coreboot] Diassemble i946GZ ?
by Antonius Riko 16 Oct '16

16 Oct '16

I can not see D946GZIS on my src/mainboard/intel ....where is it ?

1 0

Re: [coreboot] Diassemble i946GZ ?
by Antonius Riko 16 Oct '16

16 Oct '16

I didn't see carefully that coreboot has 946....hopefully it will help me a lot...I need to see it's superio and southbridge then...

1 0

Diassemble i946GZ ?
by Riko Ho 16 Oct '16

16 Oct '16

Everyone.. What's the process on diassembling i946GZ ? How can I do that from my original motherboard ? so I can see the init process of this northbridge ? How can I use SerialICE doing it ? I want to know the process downloading the code from the original motherboard, and run it on Qemu ? and capture the init process for northbridge ? Does anyone have the reference ? Thanks

2 1

Re: [coreboot] coreboot.rom as binary file ?
by Riko Ho 16 Oct '16

16 Oct '16

Comparing : http://ark.intel.com/products/34505/Intel-82945GC-Graphics-and-Memory-Contr… http://ark.intel.com/products/27725/Intel-82946GZ-Graphics-and-Memory-Contr… they have the same job....but I'm not sure if they have the same init code...if I'm lucky, they have the same init code, only I will miss some features from 82946GZ if I'm using the code from 82945GC... How do you reckon ? On 17/10/2016 8:19 AM, David Hendricks wrote: > > On Sun, Oct 16, 2016 at 5:14 PM, Riko Ho <antonius.riko(a)gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > That one ? > > > Yes.

1 0

Re: [coreboot] coreboot.rom as binary file ?
by Riko Ho 16 Oct '16

16 Oct '16

Ok, is W39V040 FCPZ compatible with W39V040FB ? on my original board is FB series...my spare chip is FC series.... How can I diassemble the original flash with SerialICE and run it on Qemu ? I have written onto my FC series chip, but I want to see the original one running on qemu, since the chipset I have on coreboot it different, onboard is intel 82946GZ and on coreboot I'm using intel82945GM, but super IO and southbridge are supported by coreboot So I want to copy / download the original one and simulate it on qemu then disassemble northbridge init code and rewrite it for coreboot... On 17/10/2016 8:19 AM, David Hendricks wrote: > > On Sun, Oct 16, 2016 at 5:14 PM, Riko Ho <antonius.riko(a)gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > That one ? > > > Yes.

1 0

Re: [coreboot] coreboot.rom as binary file ?
by Riko Ho 16 Oct '16

16 Oct '16

That one ? On 17/10/2016 8:00 AM, David Hendricks wrote: > On Sun, Oct 16, 2016 at 4:03 PM, Riko Ho <antonius.riko(a)gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > Ok, I can burn it already as *.bin....now what do I expect to run > from serial ? what 's the baud speed ? > > > How did you configure it? Look under "Console" in menuconfig. >

2 1

Re: [coreboot] coreboot.rom as binary file ?
by Riko Ho 16 Oct '16

16 Oct '16

Ok, I can burn it already as *.bin....now what do I expect to run from serial ? what 's the baud speed ? On 17/10/2016 4:23 AM, Sergej Ivanov wrote: > > Yes. coreboot.rom is a simple binary file (not a .hex file), so you > can flash it like a .bin file. > > 16.10.2016 9:14 пользователь "Antonius Riko" <antonius.riko(a)gmail.com > <mailto:antonius.riko@gmail.com>> написал: > > Everyone, > > Can I burn coreboot.rom as a *.bin file on flash programmer ? My > flash programmer is Genius G540 > > Cheers > > -- > coreboot mailing list: coreboot(a)coreboot.org > <mailto:coreboot@coreboot.org> > https://www.coreboot.org/mailman/listinfo/coreboot > <https://www.coreboot.org/mailman/listinfo/coreboot> >

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot October 2016