I have tested S3 on board m2v-mx_se. it works. But if I put two DDR2 on
board, it would die at post_cache_as_ram. it because stack variable
resume_backup_memory changed its value to 0xffffffff after invoking
disable_cache_as_ram_bsp(). I am trying to fix this. but I got some
question about the whole picture of disable_cache_as_ram().
I am also not quite understand why we need backup_resume() function in
post_cache_as_ram(). I thought all previous state info are saved at RAM
after S3 sleep. When we are doing wakeup, we just need to copy current
information from cache_as_ram to RAM at post_cache_as_ram() function,
right? Why do we need to do backup_resume() at this point(it is still at
We got the stand at FOSDEM. I would like to ask who will attend the FOSDEM? So
far I know about:
Me, Carl-Daniel, Peter Stuge.
We would like to ask for the help with the stand.
-------- Původní zpráva --------
Předmět: [FOSDEM] Coreboot + flashrom stand acceptance
Datum: Wed, 22 Dec 2010 00:03:14 -0800 (PST)
Od: Elise Huard <ehuard(a)fosdem.org>
Kopie: devrooms <devrooms(a)fosdem.org>
Your request for a stand of Coreboot + flashrom at FOSDEM 2010 has been
accepted, and we will put the following at your disposal:
- on Saturday from 10:00 to 18:00 and Sunday from 10:00 to 17:00,
- 1 table(s) of 2 meter width and 1 meter depth, 2 seats per table,
- most probably in the AW building (subject to change),
- best-effort wireless interenet and one(!) type C/E power plug.
If you want to decline this offer, please tell us as soon as possible.
We provide only one power plug per stand, but you can hook up several
multi-socket power chords. Because we can not provide those for every stand, we
must ask you to bring your own multi-socket power chords.
To make the stands look more professional, we would also like to ask you to
bring a table cloth that covers the table and the front of it. The front side is
a very good place to put your logo and name in large on, this will increase your
We will stick A4 sheets with your project name on the tables, so you'll know
where to install stuff. The best time to build up your stands in the H building
is around 09:00. From 09:30-10:00 the people start to rush in, heading for the
opening talks. In the AW building, things are typically more quiet until the
opening talks are finished, which is around 12:00.
With kind regards,
The FOSDEM stand organizers.