Author: uwe
Date: 2009-05-09 16:26:04 +0200 (Sat, 09 May 2009)
New Revision: 490
Modified:
trunk/board_enable.c
Log:
Add support for EPoX EP-8K5A2 and separate out common VT823x board enable code.
Signed-off-by: Luc Verhaegen <libv(a)skynet.be>
Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de>
Modified: trunk/board_enable.c
===================================================================
--- trunk/board_enable.c 2009-05-09 07:32:30 UTC (rev 489)
+++ trunk/board_enable.c 2009-05-09 14:26:04 UTC (rev 490)
@@ -3,7 +3,7 @@
*
* Copyright (C) 2005-2007 coresystems GmbH <stepan(a)coresystems.de>
* Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de>
- * Copyright (C) 2007-2008 Luc Verhaegen <libv(a)skynet.be>
+ * Copyright (C) 2007-2009 Luc Verhaegen <libv(a)skynet.be>
* Copyright (C) 2007 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
@@ -152,6 +152,65 @@
}
/**
+ * w83627: Enable MEMW# and set ROM size to max.
+ */
+static void w836xx_memw_enable(uint16_t index)
+{
+ w836xx_ext_enter(index);
+ if (!(wbsio_read(index, 0x24) & 0x02)) { /* Flash ROM enabled? */
+ /* Enable MEMW# and set ROM size select to max. (4M). */
+ wbsio_mask(index, 0x24, 0x28, 0x28);
+ }
+ w836xx_ext_leave(index);
+}
+
+/**
+ * Common routine for several VT823x based boards.
+ */
+static void vt823x_set_all_writes_to_lpc(struct pci_dev *dev)
+{
+ uint8_t val;
+
+ /* All memory cycles, not just ROM ones, go to LPC. */
+ val = pci_read_byte(dev, 0x59);
+ val &= ~0x80;
+ pci_write_byte(dev, 0x59, val);
+}
+
+/**
+ * VT823x: Set one of the GPIO pins.
+ */
+static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise)
+{
+ uint16_t base;
+ uint8_t val, bit;
+
+ if ((gpio < 12) || (gpio > 15)) {
+ fprintf(stderr, "\nERROR: "
+ "VT823x GPIO%02d is not implemented.\n", gpio);
+ return;
+ }
+
+ /* GPIO12-15 -> output */
+ val = pci_read_byte(dev, 0xE4);
+ val |= 0x10;
+ pci_write_byte(dev, 0xE4, val);
+
+ /* Now raise/drop the GPIO line itself. */
+ bit = 0x01 << (gpio - 8);
+
+ /* We need the I/O Base Address for this board's flash enable. */
+ base = pci_read_word(dev, 0x88) & 0xff80;
+
+ val = INB(base + 0x4D);
+ if (raise)
+ val |= bit;
+ else
+ val &= ~bit;
+ OUTB(val, base + 0x4D);
+}
+
+/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
* We don't need to do this when using coreboot, GPIO15 is never lowered there.
@@ -159,8 +218,6 @@
static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
- uint16_t base;
- uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
@@ -168,19 +225,9 @@
return -1;
}
- /* GPIO12-15 -> output */
- val = pci_read_byte(dev, 0xE4);
- val |= 0x10;
- pci_write_byte(dev, 0xE4, val);
+ /* GPIO15 is connected to write protect. */
+ vt823x_gpio_set(dev, 15, 1);
- /* Get Power Management IO address. */
- base = pci_read_word(dev, 0x88) & 0xFF80;
-
- /* Enable GPIO15 which is connected to write protect. */
- val = INB(base + 0x4D);
- val |= 0x80;
- OUTB(val, base + 0x4D);
-
return 0;
}
@@ -192,7 +239,6 @@
static int board_asus_a7v8x_mx(const char *name)
{
struct pci_dev *dev;
- uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev)
@@ -202,29 +248,18 @@
return -1;
}
- /* This bit is marked reserved actually. */
- val = pci_read_byte(dev, 0x59);
- val &= 0x7F;
- pci_write_byte(dev, 0x59, val);
+ vt823x_set_all_writes_to_lpc(dev);
+ w836xx_memw_enable(0x2E);
- /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
- w836xx_ext_enter(0x2E);
-
- if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */
- wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */
-
- w836xx_ext_leave(0x2E);
-
return 0;
}
/**
- * Suited for VIAs EPIA SP.
+ * Suited for VIAs EPIA SP and EPIA CN.
*/
static int board_via_epia_sp(const char *name)
{
struct pci_dev *dev;
- uint8_t val;
dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */
if (!dev) {
@@ -232,15 +267,30 @@
return -1;
}
- /* All memory cycles, not just ROM ones, go to LPC */
- val = pci_read_byte(dev, 0x59);
- val &= ~0x80;
- pci_write_byte(dev, 0x59, val);
+ vt823x_set_all_writes_to_lpc(dev);
return 0;
}
/**
+ * Suited for EPoX EP-8K5A2.
+ */
+static int board_epox_ep_8k5a2(const char *name)
+{
+ struct pci_dev *dev;
+
+ dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
+ if (!dev) {
+ fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n");
+ return -1;
+ }
+
+ w836xx_memw_enable(0x2E);
+
+ return 0;
+}
+
+/**
* Suited for ASUS P5A.
*
* This is rather nasty code, but there's no way to do this cleanly.
@@ -578,8 +628,6 @@
{
struct pci_dev *dev;
uint8_t val;
- uint32_t val2;
- uint16_t port;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
@@ -591,24 +639,9 @@
val &= 0x0c;
pci_write_byte(dev, 0x59, val);
- /* We need the I/O Base Address for this board's flash enable. */
- port = pci_read_word(dev, 0x88) & 0xff80;
+ vt823x_gpio_set(dev, 12, 1);
+ w836xx_memw_enable(0x2E);
- /* Starting at 'I/O Base + 0x4c' is the GPO Port Output Value.
- * We must assert GPO12 for our enable, which is in 0x4d.
- */
- val2 = INB(port + 0x4d);
- val2 |= 0x10;
- OUTB(val2, port + 0x4d);
-
- /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
- w836xx_ext_enter(0x2e);
- if (!(wbsio_read(0x2e, 0x24) & 0x02)) { /* Flash ROM enabled? */
- /* Enable MEMW# and set ROM size select to max. (4M). */
- wbsio_mask(0x2e, 0x24, 0x28, 0x28);
- }
- w836xx_ext_leave(0x2e);
-
return 0;
}
@@ -667,6 +700,7 @@
{0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", ich2_gpio22_raise},
{0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "asus", "p5a", "ASUS", "P5A", board_asus_p5a},
{0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, "BioStar", "P4M80-M4", board_biostar_p4m80_m4},
+ {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, "EPoX", "EP-8K5A2", board_epox_ep_8k5a2},
{0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, "epox", "ep-bx3", "EPoX", "EP-BX3", board_epox_ep_bx3},
{0x1039, 0x0761, 0, 0, 0, 0, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash},
{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", board_biostar_p4m80_m4},