coreboot November 2009

coreboot@coreboot.org

55 participants
232 discussions

what should CONFIG_HT_CHAIN_UNITID_BASE be in "CPU/1HT device" mode?
by Bao, Zheng 17 Nov '09

17 Nov '09

Hi, Myles, About the HT code, I have a question. I am debugging my board, which is Fam10+RS780+SB700. The CPU and RS780 are the two HT node. It seems like the RS690/SB600 board. In early_ht.c, the comment in enumertate_ht_chain() says, #if CONFIG_HT_CHAIN_UNITID_BASE != 0 /* CONFIG_HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain */ I am wondering if the CONFIG_HT_CHAIN_UNITID_BASE is 0 in my case. If not, why in the supported RS690/SB600 board, the CONFIG_HT_CHAIN_UNITID_BASE is 0. Thanks. Zheng ________________________________________ From: Marc Jones [mailto:Marc.Jones@applieddesigncorp.com] Sent: Wednesday, November 04, 2009 7:31 AM To: Bao, Zheng Cc: Writer, Tim; Xie, Michael; Ni, John; Wang, Qingpei Subject: RE: coreboot 780/710 review Joe, I am not sure that you made a good change. I don't completely understand the defines either. These settings are for the pre-HT init and I don't know how much should be setup. Some of the problems come in when the pre-HT init and the fam10 init don't agree on the UNITID setting. Do you know what the UNITIDs end up as with the legacy bios? I was not clear how this was breaking for you and what your change did. I think that setting CHAIN_UNITID_BASE=0 is wrong since you have two HT devices, CPU, 780/710? 780 is considered the SB since it is Alink to the 710 right? SB_HT_CHAIN_ON_BUS0=1 should put the SB on bus 0. I am not sure about UNITID_OFFSET being set or not. I think that some early HT SB (CHAIN_END_UNITID) had to be hardcoded to 0x6, but ATI doesn't have that problem and you can leave the default setting of 0x20. You can try asking on the coreboot list as well. Myles has been working on the HT code a lot. I think that these settings should work: #HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device default CONFIG_HT_CHAIN_UNITID_BASE=1 #real SB Unit ID, default is 0x20, mean dont touch it at last #default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 #make the SB HT chain on bus 0, default is not (0) default CONFIG_SB_HT_CHAIN_ON_BUS0=1 #only offset for SB chain?, default is yes(1) default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 Also, Note that the coreboot svn was reorganized yesterday. Try to make a patch based on the new tree. Marc

3 6

[commit] r4945 - trunk/util/msrtool
by svn＠coreboot.org 16 Nov '09

16 Nov '09

Author: stuge Date: 2009-11-16 18:29:22 +0100 (Mon, 16 Nov 2009) New Revision: 4945 Modified: trunk/util/msrtool/darwin.c Log: msrtool: Add comment with DirectIO URL to the code where it is used. Signed-off-by: Peter Stuge <peter(a)stuge.se> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/util/msrtool/darwin.c =================================================================== --- trunk/util/msrtool/darwin.c 2009-11-14 19:34:55 UTC (rev 4944) +++ trunk/util/msrtool/darwin.c 2009-11-16 17:29:22 UTC (rev 4945) @@ -26,6 +26,10 @@ #include "msrtool.h" +/* This Darwin support requires DirectIO, which is available at + * http://www.coresystems.de/en/directio + */ + int darwin_probe(const struct sysdef *system) { #ifdef __DARWIN__

1 0

Payload for ASUS A8V-E SE
by Knut Kujat 16 Nov '09

16 Nov '09

Hi, what should I use as a payload for ASUS A8V-E SE tried to build one with buildrom but it no matter what I do it keeps saying that I have no .mk file for this board. I tried to build a payload with mkelfImage but it creates .elf to big to fit on the chip (4Mb). What should I do? Would a elf from a bootloader like grub be a solution? Does anyone has a payload for this board I could use? thx in advanced. Knut Kujat

2 1

Re: [coreboot] [commit] r4944 - in trunk/targets: arima/hdama emulation/qemu-x86 iei/juki-511p iwill/dk8s2 iwill/dk8x msi/ms7135 tyan/s1846
by Peter Stuge 16 Nov '09

16 Nov '09

svn(a)coreboot.org wrote: > (non-kconfig) build What remains now, before removing the buildtarget infrastructure? //Peter

2 1

[patch] DIP switch and digital I/O control patch
by Libra Li 16 Nov '09

16 Nov '09

Hello, This is a patch for control DIP switch and digital I/O. Thanks. Signed-off-by: Libra Li <libra.li(a)technexion.com>

1 0

Kconfig, ROMSIZE and others
by Maciej Pijanka 16 Nov '09

16 Nov '09

Hello What is the difference betwen ROM_SIZE defined in src/mainboard/Kconfig and ROM_IMAGE_SIZE from src/arch/i386/Kconfig? I modified one entry in src/arch/i386/Kconfig to make live easier when changing size of rom because rombase will adjust automatically, for me works perfectly, but i am not sure if ROM_IMAGE_SIZE should get similar automated defaults or not. I will prepare a patch if its desired. config ROMBASE hex default 0xffff0000 default 0xfffe0000 if COREBOOT_ROMSIZE_KB_128 default 0xfffc0000 if COREBOOT_ROMSIZE_KB_256 default 0xfff80000 if COREBOOT_ROMSIZE_KB_512 default 0xfff00000 if COREBOOT_ROMSIZE_KB_1024 default 0xffe00000 if COREBOOT_ROMSIZE_KB_2048 default 0xffc00000 if COREBOOT_ROMSIZE_KB_4096 best regards Maciej -- Maciej Pijanka, PLD-Linux Developer, Reg Linux user #133161 POE/Perl user

4 3

Multiboot header license change
by Robert Millan 16 Nov '09

16 Nov '09

Hi, This is to announce that, following approval from RMS, the header in GRUB 2 that contains Multiboot declarations (multiboot.h) is now being distributed under the X11 license in latest Bazaar trunk of GNU GRUB. With this change, we expect make it easier for OS kernel developers and implementors of Multiboot in general to adopt this specification. The Multiboot specification aims to unify bootloading on x86 across Operating Systems and firmware platforms. With GNU GRUB being the reference implementation, supporting Multiboot in your OS kernel allows it to be run in a huge installed base of GRUB Legacy and GRUB 2 systems. If you want to learn more about Multiboot, check the Multiboot manual, currently being distributed as part of GRUB Legacy, or available online at: http://www.gnu.org/software/grub/manual/multiboot/multiboot.html Best regards -- Robert Millan The DRM opt-in fallacy: "Your data belongs to us. We will decide when (and how) you may access your data; but nobody's threatening your freedom: we still allow you to remove your data and not access it at all."

2 1

Trac reminder: list of new ticket(s)
by coreboot tracker 15 Nov '09

15 Nov '09

1 0

[commit] r4944 - in trunk/targets: arima/hdama emulation/qemu-x86 iei/juki-511p iwill/dk8s2 iwill/dk8x msi/ms7135 tyan/s1846
by svn＠coreboot.org 14 Nov '09

14 Nov '09

Author: uwe Date: 2009-11-14 20:34:55 +0100 (Sat, 14 Nov 2009) New Revision: 4944 Modified: trunk/targets/arima/hdama/Config.kernelimage.lb trunk/targets/emulation/qemu-x86/Config-car.lb trunk/targets/emulation/qemu-x86/Config-lab.lb trunk/targets/emulation/qemu-x86/Config.OLPC.lb trunk/targets/emulation/qemu-x86/Config.lb trunk/targets/iei/juki-511p/Config.lb trunk/targets/iwill/dk8s2/Config.lb trunk/targets/iwill/dk8x/Config.lb trunk/targets/msi/ms7135/Config.lb trunk/targets/tyan/s1846/Config.lb Log: Fix manual (non-kconfig) build of the following boards, due to missing renames of CONFIG_HAVE_PIRQ_TABLE to CONFIG_GENERATE_PIRQ_TABLE: - iwill/dk8s2 - iwill/dk8x - emulation/qemu-x86 - iei/juki-511p - tyan/s1846 - msi/ms7135 - arima/hdama Build-tested for the QEMU target and IEI JUKI-511P. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/targets/arima/hdama/Config.kernelimage.lb =================================================================== --- trunk/targets/arima/hdama/Config.kernelimage.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/arima/hdama/Config.kernelimage.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -14,7 +14,7 @@ uses CPU_FIXUP uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_HAVE_HARD_RESET uses i586 uses i686 Modified: trunk/targets/emulation/qemu-x86/Config-car.lb =================================================================== --- trunk/targets/emulation/qemu-x86/Config-car.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/emulation/qemu-x86/Config-car.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -11,7 +11,7 @@ option CC="gcc -m32" -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=6 romimage "fallback" Modified: trunk/targets/emulation/qemu-x86/Config-lab.lb =================================================================== --- trunk/targets/emulation/qemu-x86/Config-lab.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/emulation/qemu-x86/Config-lab.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -9,7 +9,7 @@ option CC="gcc -m32" -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=6 romimage "fallback" Modified: trunk/targets/emulation/qemu-x86/Config.OLPC.lb =================================================================== --- trunk/targets/emulation/qemu-x86/Config.OLPC.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/emulation/qemu-x86/Config.OLPC.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -9,7 +9,7 @@ option CC="gcc -m32" -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=6 romimage "fallback" Modified: trunk/targets/emulation/qemu-x86/Config.lb =================================================================== --- trunk/targets/emulation/qemu-x86/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/emulation/qemu-x86/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -7,7 +7,7 @@ option CC="gcc -m32" -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=6 option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9 option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 Modified: trunk/targets/iei/juki-511p/Config.lb =================================================================== --- trunk/targets/iei/juki-511p/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/iei/juki-511p/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -23,7 +23,7 @@ option CONFIG_ROM_SIZE=256*1024 -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_COMPRESS=0 option CONFIG_PRECOMPRESSED_PAYLOAD=0 Modified: trunk/targets/iwill/dk8s2/Config.lb =================================================================== --- trunk/targets/iwill/dk8s2/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/iwill/dk8s2/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -21,7 +21,7 @@ ### ### Build code to export a programmable irq routing table ### -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=12 # ### Modified: trunk/targets/iwill/dk8x/Config.lb =================================================================== --- trunk/targets/iwill/dk8x/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/iwill/dk8x/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -21,7 +21,7 @@ ### ### Build code to export a programmable irq routing table ### -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_IRQ_SLOT_COUNT=12 # ### Modified: trunk/targets/msi/ms7135/Config.lb =================================================================== --- trunk/targets/msi/ms7135/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/msi/ms7135/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -26,7 +26,7 @@ option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 -option CONFIG_HAVE_PIRQ_TABLE=1 +option CONFIG_GENERATE_PIRQ_TABLE=1 option CONFIG_CONSOLE_VGA=1 option CONFIG_PCI_ROM_RUN=1 Modified: trunk/targets/tyan/s1846/Config.lb =================================================================== --- trunk/targets/tyan/s1846/Config.lb 2009-11-13 06:43:33 UTC (rev 4943) +++ trunk/targets/tyan/s1846/Config.lb 2009-11-14 19:34:55 UTC (rev 4944) @@ -27,7 +27,7 @@ option CONFIG_MAINBOARD_PART_NUMBER = "S1846" # TODO: Add/fix PIRQ table. -option CONFIG_HAVE_PIRQ_TABLE = 0 +option CONFIG_GENERATE_PIRQ_TABLE = 0 option CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9

1 0

building coreboot for A8V-E SE compiling errors
by Knut Kujat 13 Nov '09

13 Nov '09

Hi, I'm trying to get coreboot running on a A8V-E SE MOBO with a Athlon64 3800+ on it, I have Suse 11.0 running on it and tried to compile coreboot. The first make worked fine I set up all the option I think necessary. But at the second time I execute make it stops with multiple errors: GEN build.h CC lib/version.o AR coreboot.a CC coreboot_ram.o CC coreboot_ram /usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../x86_64-suse-linux/bin/ld: warning: .note.gnu.build-id section discarded, --build-id ignored. HOSTCXX util/cbfstool/minilzma.o /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:25:33: error: C/Common/MyInitGuid.h: No existe el fichero o el directorio /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:26:46: error: C/7zip/Compress/LZMA/LZMAEncoder.h: No existe el fichero o el directorio /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:212:42: error: C/7zip/Decompress/LzmaDecode.h: No existe el fichero o el directorio /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:213:42: error: C/7zip/Decompress/LzmaDecode.c: No existe el fichero o el directorio /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:68: error: ‘UInt32’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:102: error: expected class-name before ‘,’ token /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:103: error: expected class-name before ‘{’ token /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:107: error: ‘MY_UNKNOWN_IMP’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:114: error: ‘Read’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:114: error: ‘UInt32’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:114: error: ‘UInt32’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:114: error: ISO C++ forbids declaration of ‘STDMETHOD’ with no type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:114: error: ‘STDMETHOD’ declared as function returning a function /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:117: error: ‘STDMETHODIMP’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:130: error: expected class-name before ‘,’ token /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:131: error: expected class-name before ‘{’ token /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:132: error: ‘Byte’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:132: error: template argument 1 is invalid /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:132: error: template argument 2 is invalid /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:135: error: ‘MY_UNKNOWN_IMP’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:141: error: ‘Byte’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:141: error: template argument 1 is invalid /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:141: error: template argument 2 is invalid /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:143: error: ‘HRESULT’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:150: error: ‘Write’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:150: error: ‘UInt32’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:150: error: ‘UInt32’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:150: error: ISO C++ forbids declaration of ‘STDMETHOD’ with no type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:150: error: ‘STDMETHOD’ declared as function returning a function /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc: In member function ‘void COutStreamRam::Reserve(unsigned int)’: /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:140: error: request for member ‘reserve’ in ‘((COutStreamRam*)this)->COutStreamRam::result’, which is of non-class type ‘int’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc: At global scope: /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:153: error: ‘STDMETHODIMP’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc: In function ‘const std::vector<unsigned char, std::allocator<unsigned char> > LZMACompress(const std::vector<unsigned char, std::allocator<unsigned char> >&)’: /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:167: error: ‘UInt32’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:169: error: ‘NCompress’ has not been declared /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:169: error: ‘encoderSpec’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:169: error: expected type-specifier before ‘NCompress’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:169: error: expected `;' before ‘NCompress’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:170: error: ‘CMyComPtr’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:170: error: ‘ICompressCoder’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:170: error: ‘encoder’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:171: error: ‘PROPID’ does not name a type /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:177: error: ‘propIDs’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:178: error: ‘PROPVARIANT’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:178: error: expected `;' before ‘properties’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:179: error: ‘properties’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:179: error: ‘VT_UI4’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:179: error: ‘UInt32’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:179: error: expected `;' before numeric constant /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:180: error: expected `;' before ‘dictionarysize’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:181: error: expected `;' before numeric constant /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:183: error: ‘S_OK’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:190: error: ‘ISequentialOutStream’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:190: error: ‘outStream’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:191: error: no matching function for call to ‘CInStreamRam::CInStreamRam(const std::vector<unsigned char, std::allocator<unsigned char> >&)’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:103: note: candidates are: CInStreamRam::CInStreamRam() /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:103: note: CInStreamRam::CInStreamRam(const CInStreamRam&) /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:192: error: ‘ISequentialInStream’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:192: error: ‘inStream’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:196: error: ‘S_OK’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:200: error: ‘UInt64’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:200: error: expected `;' before ‘t’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:201: error: ‘class COutStreamRam’ has no member named ‘WriteByte’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:201: error: ‘Byte’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:201: error: ‘t’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:204: error: ‘HRESULT’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:204: error: expected `;' before ‘lzmaResult’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:205: error: ‘lzmaResult’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:205: error: ‘S_OK’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:207: error: conversion from ‘const int’ to non-scalar type ‘const std::vector<unsigned char, std::allocator<unsigned char> >’ requested /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc: In function ‘const std::vector<unsigned char, std::allocator<unsigned char> > LZMADeCompress(const std::vector<unsigned char, std::allocator<unsigned char> >&)’: /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:224: error: ‘CLzmaDecoderState’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:224: error: expected `;' before ‘state’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:225: error: ‘state’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:225: error: ‘LZMA_PROPERTIES_SIZE’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:225: error: ‘LzmaDecodeProperties’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:226: error: expected type-specifier before ‘CProb’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:226: error: expected `;' before ‘CProb’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:228: error: ‘SizeT’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:228: error: expected `;' before ‘in_done’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:229: error: expected `;' before ‘out_done’ /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:230: error: ‘in_done’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:231: error: ‘out_done’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:231: error: ‘LzmaDecode’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc: In function ‘void do_lzma_uncompress(char*, int, char*, int)’: /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:306: error: ‘SizeT’ was not declared in this scope /home/knut/Documents/trunk1/util/cbfstool/lzma/minilzma.cc:306: error: expected `)' before ‘dst_len’ make: *** [/home/knut/Documents/trunk1/build/util/cbfstool/minilzma.o] Error 1 (sorry for the long output) Am I'm missing some libraries that have to be installed? Thanks in advanced and have a nice weekend :)

2 1

← Newer
1
...
8
9
10
11
12
13
14
...
24
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot November 2009