coreboot April 2008

coreboot@coreboot.org

75 participants
404 discussions

[PATCH] [v3] add unwanted_vpci parsing to cs5536 southbridge
by Ward Vandewege 17 Apr '08

17 Apr '08

This one is largely thanks to Marc. Mostly written during the summit in Denver. It depends on the dts patch I just sent. Thanks, Ward. -- Ward Vandewege <ward(a)fsf.org> Free Software Foundation - Senior System Administrator

3 6

r662 - coreboot-v3/southbridge/amd/cs5536
by svn＠coreboot.org 17 Apr '08

17 Apr '08

Author: ward Date: 2008-04-17 18:30:27 +0200 (Thu, 17 Apr 2008) New Revision: 662 Modified: coreboot-v3/southbridge/amd/cs5536/cs5536.c coreboot-v3/southbridge/amd/cs5536/dts Log: Add unwanted_vpci parsing to AMD's cs5536 southbridge. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: coreboot-v3/southbridge/amd/cs5536/cs5536.c =================================================================== --- coreboot-v3/southbridge/amd/cs5536/cs5536.c 2008-04-17 16:13:58 UTC (rev 661) +++ coreboot-v3/southbridge/amd/cs5536/cs5536.c 2008-04-17 16:30:27 UTC (rev 662) @@ -617,6 +617,7 @@ */ static void southbridge_init(struct device *dev) { + int i; struct southbridge_amd_cs5536_dts_config *sb = (struct southbridge_amd_cs5536_dts_config *)dev->device_configuration; @@ -648,6 +649,11 @@ enable_USB_port4(sb); + /* disable unwanted virtual PCI devices */ + for (i = 0; 0 != sb->unwanted_vpci[i]; i++) { + hide_vpci(sb->unwanted_vpci[i]); + } + if (sb->enable_ide) ide_init(dev); Modified: coreboot-v3/southbridge/amd/cs5536/dts =================================================================== --- coreboot-v3/southbridge/amd/cs5536/dts 2008-04-17 16:13:58 UTC (rev 661) +++ coreboot-v3/southbridge/amd/cs5536/dts 2008-04-17 16:30:27 UTC (rev 662) @@ -64,4 +64,9 @@ * probably not what you want. */ power_button = "0"; + + /* Vpci devices to be disabled. Put device locations here, and always end the + * array with a zero element. */ + unwanted_vpci = < 0 >; + };

1 0

[PATCH] [v3] add array parsing to dts
by Ward Vandewege 17 Apr '08

17 Apr '08

With a lot of help from Stepan at the summit, this patch adds array parsing support to the dts, specifically for the 'unwanted_vpci' field. The code is a bit of a hack - it matches against the field name to change interpretation to array mode. Ideally we'd add some more type information after the parsing of the dts, and use that to write out statictree.c. The dts parsing/generation code needs some love, so I'm not too worried about the hackishness of this patch at this point. But if someone wants to improve it, be my guest :) Thanks, Ward. -- Ward Vandewege <ward(a)fsf.org> Free Software Foundation - Senior System Administrator

4 6

r661 - coreboot-v3/util/dtc
by svn＠coreboot.org 17 Apr '08

17 Apr '08

Author: ward Date: 2008-04-17 18:13:58 +0200 (Thu, 17 Apr 2008) New Revision: 661 Modified: coreboot-v3/util/dtc/data.c coreboot-v3/util/dtc/dtc.h coreboot-v3/util/dtc/flattree.c coreboot-v3/util/dtc/livetree.c Log: Add generic array support to the coreboot dts output code. This is necessary for the 'unwanted_vpci' field on geode-based boards. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: coreboot-v3/util/dtc/data.c =================================================================== --- coreboot-v3/util/dtc/data.c 2008-04-16 21:34:56 UTC (rev 660) +++ coreboot-v3/util/dtc/data.c 2008-04-17 16:13:58 UTC (rev 661) @@ -64,6 +64,7 @@ nd.asize = newsize; nd.val = xrealloc(d.val, newsize); nd.len = d.len; + nd.type = d.type; nd.refs = d.refs; assert(nd.asize >= (d.len + xlen)); @@ -199,7 +200,11 @@ struct data data_append_cell(struct data d, cell_t word) { - cell_t beword = cpu_to_be32(word); + // Don't do system/network order byte translation. We don't do it for scalars either. + //cell_t beword = cpu_to_be32(word); + cell_t beword = word; + // Mark this property as being of the 'cell' type + d.type = 'C'; return data_append_data(d, &beword, sizeof(beword)); } @@ -223,6 +228,8 @@ struct data data_append_byte(struct data d, uint8_t byte) { + // Mark this property as being of the 'byte' type + d.type = 'B'; return data_append_data(d, &byte, 1); } Modified: coreboot-v3/util/dtc/dtc.h =================================================================== --- coreboot-v3/util/dtc/dtc.h 2008-04-16 21:34:56 UTC (rev 660) +++ coreboot-v3/util/dtc/dtc.h 2008-04-17 16:13:58 UTC (rev 661) @@ -105,6 +105,7 @@ struct data { int len; unsigned char *val; + unsigned char type; int asize; struct fixup *refs; }; Modified: coreboot-v3/util/dtc/flattree.c =================================================================== --- coreboot-v3/util/dtc/flattree.c 2008-04-16 21:34:56 UTC (rev 660) +++ coreboot-v3/util/dtc/flattree.c 2008-04-17 16:13:58 UTC (rev 661) @@ -452,9 +452,24 @@ return; cleanname = clean(p->name, 1); - fprintf(f, "\t.%s = ", cleanname); + if (d.type == 'S') { + // Standard property (scalar) + fprintf(f, "\t.%s = ", cleanname); + fprintf(f, "0x%lx,\n", strtoul((char *)d.val, 0, 0)); + } else if (d.type == 'C') { + // 'Cell' property (array of 4-byte elements) + fprintf(f, "\t.%s = {\n", cleanname); + int i; + for (i = 0; (i < d.len) && (0 != *(u32 *)(d.val+i)); i = i+4) { + fprintf(f, "\t\t[%d] = 0x%08X,\n",i/4,*(u32 *)(d.val+i)); + } + fprintf(f, "\t\t[%d] = 0x0,\n",i/4); // Make sure to end our array with a zero element + fprintf(f, "\t},\n"); + } else if (d.type == 'B') { + fprintf(f, "\tUNIMPLEMENTED: FIXME\n"); + } free(cleanname); - fprintf(f, "0x%lx,\n", strtoul((char *)d.val, 0, 0)); + #if 0 /* sorry, but right now, u32 is all you get */ fprintf(f, "0"); @@ -785,7 +800,16 @@ if (streq(prop->name, "device_operations")) /* this is special */ continue; cleanname = clean(prop->name, 0); - fprintf(f, "\tu32 %s;\n", cleanname); + if (prop->val.type == 'S') { + // Standard property, scalar + fprintf(f, "\tu32 %s;\n", cleanname); + } else if (prop->val.type == 'C') { + // 'Cell' property (array of 4-byte elements) + fprintf(f, "\tu32 %s[%d];\n", cleanname,prop->val.len/4+1); + } else if (prop->val.type == 'B') { + // Byte property + fprintf(f, "\tUNIMPLEMENTED: FIXME\n"); + } free(cleanname); } Modified: coreboot-v3/util/dtc/livetree.c =================================================================== --- coreboot-v3/util/dtc/livetree.c 2008-04-16 21:34:56 UTC (rev 660) +++ coreboot-v3/util/dtc/livetree.c 2008-04-17 16:13:58 UTC (rev 661) @@ -32,6 +32,9 @@ new->name = name; new->val = val; + if (new->val.type == NULL) { + new->val.type = 'S'; // Default to 'scalar' type; if this is a cell or byte value, type will already be set + } new->next = NULL; @@ -301,7 +304,9 @@ } prop_checker_table[] = { {"name", must_be_string}, {"name", name_prop_check}, -/* we don't care about these things now -- we think */ + /* unwanted_vpci must be a cells field (i.e. an array) */ + {"unwanted_vpci", must_be_cells}, + /* we don't care about these things now -- we think */ {"linux,phandle", must_be_one_cell}, {"#address-cells", must_be_one_cell}, {"#size-cells", must_be_one_cell},

1 0

r147 - in buildrom-devel: . config/payloads config/platforms
by svn＠coreboot.org 17 Apr '08

17 Apr '08

Author: uwe Date: 2008-04-17 17:21:08 +0200 (Thu, 17 Apr 2008) New Revision: 147 Modified: buildrom-devel/Config.in buildrom-devel/config/payloads/Config.in buildrom-devel/config/platforms/Config.in Log: Change all kconfig 'depends' keywords (which are deprecated in recent kconfig versions) to 'depends on' (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: buildrom-devel/Config.in =================================================================== --- buildrom-devel/Config.in 2008-04-16 23:40:46 UTC (rev 146) +++ buildrom-devel/Config.in 2008-04-17 15:21:08 UTC (rev 147) @@ -70,7 +70,7 @@ config COREBOOT_V3 bool "coreboot v3" - depends EXPERIMENTAL + depends on EXPERIMENTAL help Select this option to build a coreboot v3 based ROM. This is experimental, and only supports a few platforms. @@ -78,7 +78,7 @@ config COREBOOT_V3_OVERRIDE_ROM_SIZE bool "Override default ROM size" - depends COREBOOT_V3 + depends on COREBOOT_V3 help Select this option to specify your own ROM size. Use this option if your chip is a different size than the one that @@ -87,15 +87,15 @@ config COREBOOT_V3_ROM_SIZE int "coreboot v3 romsize in KB" default "1024" - depends COREBOOT_V3_OVERRIDE_ROM_SIZE + depends on COREBOOT_V3_OVERRIDE_ROM_SIZE help Specify the ROM size here in KB. config USE_LZMA bool "Enable LZMA compression" - depends !(PAYLOAD_OFW && COREBOOT_V2) - depends !(PAYLOAD_FILO && COREBOOT_V2) - depends !(PAYLOAD_ETHERBOOT && COREBOOT_V2) + depends on !(PAYLOAD_OFW && COREBOOT_V2) + depends on !(PAYLOAD_FILO && COREBOOT_V2) + depends on !(PAYLOAD_ETHERBOOT && COREBOOT_V2) default y help Precompress the payload with LZMA when using coreboot v2. This doesn't @@ -106,7 +106,7 @@ config CB_USE_BUILD bool "Specify a coreboot build dir" - depends ADVANCED + depends on ADVANCED default n help Say 'y' here to specify an existing directory to build @@ -115,11 +115,11 @@ config CB_BUILDDIR string "coreboot build directory" - depends CB_USE_BUILD + depends on CB_USE_BUILD config CB_CUSTOM_REV bool "Override the platform coreboot revision" - depends ADVANCED && !CB_USE_BUILD + depends on ADVANCED && !CB_USE_BUILD default n help Say 'y' here to overide the default coreboot SVN revsion @@ -127,7 +127,7 @@ config CB_REVISION string "coreboot revision" - depends CB_CUSTOM_REV + depends on CB_CUSTOM_REV endmenu @@ -149,7 +149,7 @@ config TARGET_32BIT bool - depends !TARGET_64BIT + depends on !TARGET_64BIT default y config TARGET_64BIT @@ -161,7 +161,7 @@ config USE_NRV2B bool - depends PLATFORM_GEODE && COREBOOT_V2 + depends on PLATFORM_GEODE && COREBOOT_V2 default y source config/platforms/Config.in Modified: buildrom-devel/config/payloads/Config.in =================================================================== --- buildrom-devel/config/payloads/Config.in 2008-04-16 23:40:46 UTC (rev 146) +++ buildrom-devel/config/payloads/Config.in 2008-04-17 15:21:08 UTC (rev 147) @@ -16,35 +16,35 @@ bool "Custom Payload" config PAYLOAD_GPXE - depends EXPERIMENTAL + depends on EXPERIMENTAL bool "GPXE" config PAYLOAD_ETHERBOOT - depends !PLATFORM_M57SLI - depends !PLATFORM_TYAN_S2891 + depends on !PLATFORM_M57SLI + depends on !PLATFORM_TYAN_S2891 bool "Etherboot" config PAYLOAD_FILO bool "FILO" config PAYLOAD_KERNEL - depends !PLATFORM_GA_2761GXDK + depends on !PLATFORM_GA_2761GXDK bool "Linux kernel payload" select PAYLOAD_64BIT config PAYLOAD_LAB - depends !PLATFORM_GA_2761GXDK + depends on !PLATFORM_GA_2761GXDK bool "Linux As Bootloader" select PAYLOAD_64BIT #config PAYLOAD_OFW -# depends !PLATFORM_M57SLI -# depends !PLATFORM_TYAN_S2891 +# depends on !PLATFORM_M57SLI +# depends on !PLATFORM_TYAN_S2891 # bool "OpenFirmware" config PAYLOAD_MEMTEST - depends !PLATFORM_M57SLI - depends !PLATFORM_TYAN_S2891 + depends on !PLATFORM_M57SLI + depends on !PLATFORM_TYAN_S2891 bool "Memtest86" config PAYLOAD_TINT @@ -53,7 +53,7 @@ choice prompt "Desired target architecture" - depends PLATFORM_SUPPORT_64BIT && PAYLOAD_64BIT + depends on PLATFORM_SUPPORT_64BIT && PAYLOAD_64BIT default CHOOSE_32BIT help Chose the target architecture for the payload. @@ -69,7 +69,7 @@ endchoice menu "Custom Payload" -depends PAYLOAD_CUSTOM +depends on PAYLOAD_CUSTOM config CUSTOM_PAYLOAD string "Custom payload filename" default "" @@ -81,7 +81,7 @@ endmenu menu "Kernel Configuration" -depends PAYLOAD_KERNEL +depends on PAYLOAD_KERNEL config CMDLINE string "Kernel command line" @@ -92,7 +92,7 @@ endmenu menu "LAB Configuration" -depends PAYLOAD_LAB +depends on PAYLOAD_LAB config KBL_KEXEC_ONLY bool @@ -123,7 +123,7 @@ endmenu menu "Memtest86 Configuration" -depends PAYLOAD_MEMTEST +depends on PAYLOAD_MEMTEST config MEMTEST_SERIAL bool "Configure memtest for serial output" @@ -134,7 +134,7 @@ endmenu menu "Etherboot Configuration" -depends PAYLOAD_ETHERBOOT +depends on PAYLOAD_ETHERBOOT config ETHERBOOT_DRIVER string "Etherboot NIC driver to support" @@ -146,8 +146,8 @@ endmenu menu "GPXE Configuration" -depends PAYLOAD_GPXE -depends EXPERIMENTAL +depends on PAYLOAD_GPXE +depends on EXPERIMENTAL config GPXE_DRIVER string "GPXE NIC driver to support" Modified: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel/config/platforms/Config.in 2008-04-16 23:40:46 UTC (rev 146) +++ buildrom-devel/config/platforms/Config.in 2008-04-17 15:21:08 UTC (rev 147) @@ -17,7 +17,7 @@ config VENDOR_GIGABYTE bool "GIGABYTE" - depends COREBOOT_V2 + depends on COREBOOT_V2 config VENDOR_PC_ENGINES bool "PC Engines" @@ -27,11 +27,11 @@ config VENDOR_SUPERMICRO bool "Supermicro" - depends COREBOOT_V2 + depends on COREBOOT_V2 config VENDOR_TYAN bool "Tyan" - depends COREBOOT_V2 + depends on COREBOOT_V2 endchoice @@ -43,98 +43,98 @@ config PLATFORM_NORWICH bool "AMD Geode LX 'Norwich'" - depends VENDOR_AMD + depends on VENDOR_AMD select PLATFORM select PLATFORM_GEODE config PLATFORM_DBE61 bool "Artec Group DBE61" - depends VENDOR_ARTEC_GROUP + depends on VENDOR_ARTEC_GROUP select PLATFORM select PLATFORM_GEODE config PLATFORM_ALIX1C bool "PC Engines ALIX1.C" - depends VENDOR_PC_ENGINES + depends on VENDOR_PC_ENGINES select PLATFORM select PLATFORM_GEODE config PLATFORM_MSM800SEV bool "Advanced Digital Logic MSM800SEV" - depends VENDOR_ADVANCED_DIGITAL_LOGIC + depends on VENDOR_ADVANCED_DIGITAL_LOGIC select PLATFORM select PLATFORM_GEODE config PLATFORM_DB800 bool "AMD DB800" - depends VENDOR_AMD - depends COREBOOT_V2 + depends on VENDOR_AMD + depends on COREBOOT_V2 select PLATFORM select PLATFORM_GEODE config PLATFORM_GA_M57SLI_S4 bool "GIGABYTE GA-M57SLI-S4" - depends VENDOR_GIGABYTE - depends COREBOOT_V2 + depends on VENDOR_GIGABYTE + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_GA_2761GXDK bool "GIGABYTE GA-2761GXDK" - depends VENDOR_GIGABYTE - depends COREBOOT_V2 + depends on VENDOR_GIGABYTE + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2881 bool "Tyan S2881" - depends VENDOR_TYAN - depends COREBOOT_V2 + depends on VENDOR_TYAN + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2882 bool "Tyan S2882" - depends VENDOR_TYAN - depends COREBOOT_V2 + depends on VENDOR_TYAN + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2891 bool "Tyan S2891" - depends VENDOR_TYAN - depends COREBOOT_V2 + depends on VENDOR_TYAN + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_QEMU-X86 bool "QEMU Emulator" - depends VENDOR_QEMU + depends on VENDOR_QEMU select PLATFORM config PLATFORM_SERENGETI_CHEETAH bool "AMD Serengeti-Cheetah" - depends VENDOR_AMD + depends on VENDOR_AMD select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_SUPERMICRO_H8DMR bool "Supermicro H8DMR" - depends VENDOR_SUPERMICRO - depends COREBOOT_V2 + depends on VENDOR_SUPERMICRO + depends on COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_CHEETAH_FAM10 bool "AMD Serengeti-Cheetah with fam10 processor" - depends VENDOR_AMD + depends on VENDOR_AMD select PLATFORM select PLATFORM_SUPPORT_64BIT endchoice choice prompt "Geode VSA SMM handler" - depends PLATFORM_GEODE + depends on PLATFORM_GEODE default VSA_LEGACY help Select the SMM handler source to use with Geode platforms @@ -144,14 +144,14 @@ config VSA_OPENVSA bool "OpenVSA" - depends EXPERIMENTAL + depends on EXPERIMENTAL endchoice config BUILD_QEMU bool "Build QEMU with patches for LinuxBIOS" - depends PLATFORM_QEMU-X86 + depends on PLATFORM_QEMU-X86 default n help Say 'y' here to build a patched version of QEMU to work with @@ -160,7 +160,7 @@ config QEMU_CC string "Compiler to use when building QEMU" - depends BUILD_QEMU + depends on BUILD_QEMU default "gcc34" help QEMU has known problems when built using gcc 4.x. @@ -168,7 +168,7 @@ config SIMNOW bool "Build for the AMD SimNow (TM) emulator" - depends PLATFORM_SERENGETI_CHEETAH || PLATFORM_SERENGETI_CHEETAH_64 + depends on PLATFORM_SERENGETI_CHEETAH || PLATFORM_SERENGETI_CHEETAH_64 default n help Say 'y' here to patch the build to work on an

1 0

Time for a new project
by Jordan Crouse 17 Apr '08

17 Apr '08

Thanks to the tireless efforts of Uwe and with the assistance of Ward and Marc, libpayload and coreinfo are fully up to date and feature-filled, and now an option in buildrom. Libpayload is the backend for two working payloads (coreinfo and tint) and more on the way. It is now time to start considering the next great payload challenge. Immediately after I demonstrated coreinfo to Ron, he said - "okay, now we need a chooser". And the thing about Ron is, when he is right, he is right. A master payload to chose and load other payloads is the next great step in our effort. Originally we had only discussed a menu based chooser, but recently many people have told me how they would like to see a loader that could chain multiple payloads together in order to cobble together a reasonable facsimile of a traditional BIOS setup screen. The more I have thought about this, the more I think that this effort is key to proving (and improving) the stability and versatility of coreboot-v3. It will also force us to examine much of our current implementation, which is not a bad thing. So, short story long, I have written down the evolving ideas in my head and the resulting roadmap here: http://www.coreboot.org/Bayou "Bayou" is the working name for the project - visit the page to find out why. This is also going to involve a new loader format that we discussed at the summit: http://www.coreboot.org/SELF Please critically review both and post comments here or in the discussion pages. Thanks! Jordan PS: I very nearly called it 'corechooser' as a joke, but I think that would have caused Peter to track me down and hunt me for sport. -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.

14 94

Re: [coreboot] Crazy Intel graphics mtrr
by joe＠settoplinux.org 17 Apr '08

17 Apr '08

>On Wed, Apr 16, 2008 at 5:03 PM, <joe(a)settoplinux.org> wrote: >> Hello, >> I am noticing some X problems (slow, crashes once and a while) on the RCA >RM4100. I think this is related to the crazy way coreboot setup the mtrr. For >some reason when the Intel onboard graphics are enabled, coreboot sets up this >crazy looking mtrr. I don't think they should all be write-back? Isn't >write-combining faster for graphics? Does it need to have a uncachable area? >> > >that is normal. > >> reg00: base=0x00000000 ( 0MB), size= 64MB: write-back, count=1 >> reg01: base=0x04000000 ( 64MB), size= 32MB: write-back, count=1 >> reg02: base=0x06000000 ( 96MB), size= 16MB: write-back, count=1 >> reg03: base=0x07000000 ( 112MB), size= 8MB: write-back, count=1 >== >> reg00: base=0x07800000 ( 120MB), size= 8MB: uncachable, count=1 >> reg01: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 > >and old kernel like previous one >64+32+16+8 == (128 - 8) > >YH > Hmm, so it all adds up but, what is the need for 3 different mtrr's instead of one? Also, what about this: >> I don't think they should all be write-back? Isn't >> write-combining faster for graphics? Does it need to have a uncachable area? -- Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org

1 0

buildrom: Add TINT to buildrom
by Jordan Crouse 17 Apr '08

17 Apr '08

As the subject says - TINT rocks! Thanks Uwe! This is our 9th payload. One more and we get a free pizza! :) -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.

2 2

r146 - in buildrom-devel: config/payloads packages packages/libpayload packages/tint
by svn＠coreboot.org 17 Apr '08

17 Apr '08

Author: jcrouse Date: 2008-04-17 01:40:46 +0200 (Thu, 17 Apr 2008) New Revision: 146 Added: buildrom-devel/config/payloads/tint.conf buildrom-devel/packages/tint/ buildrom-devel/packages/tint/tint.mk Modified: buildrom-devel/config/payloads/Config.in buildrom-devel/config/payloads/payloads.conf buildrom-devel/packages/libpayload/libpayload.mk Log: buildrom: Add TINT to buildrom Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: buildrom-devel/config/payloads/Config.in =================================================================== --- buildrom-devel/config/payloads/Config.in 2008-04-16 23:27:24 UTC (rev 145) +++ buildrom-devel/config/payloads/Config.in 2008-04-16 23:40:46 UTC (rev 146) @@ -47,6 +47,8 @@ depends !PLATFORM_TYAN_S2891 bool "Memtest86" +config PAYLOAD_TINT + bool "TINT (falling blocks game)" endchoice choice Modified: buildrom-devel/config/payloads/payloads.conf =================================================================== --- buildrom-devel/config/payloads/payloads.conf 2008-04-16 23:27:24 UTC (rev 145) +++ buildrom-devel/config/payloads/payloads.conf 2008-04-16 23:40:46 UTC (rev 146) @@ -25,6 +25,7 @@ PCONF-$(CONFIG_PAYLOAD_KERNEL) = kernel.conf PCONF-$(CONFIG_PAYLOAD_CUSTOM) = custom.conf PCONF-$(CONFIG_PAYLOAD_COREINFO) = coreinfo.conf +PCONF-$(CONFIG_PAYLOAD_TINT) = tint.conf DEPENDS-y= include $(CONFIG_DIR)/payloads/$(PCONF-y) Added: buildrom-devel/config/payloads/tint.conf =================================================================== --- buildrom-devel/config/payloads/tint.conf (rev 0) +++ buildrom-devel/config/payloads/tint.conf 2008-04-16 23:40:46 UTC (rev 146) @@ -0,0 +1,14 @@ +# Configuration file for the tint payload + +# Common configuration options + +PAYLOAD_BUILD=scripts/Makefile.generic + +PAYLOAD_ELF=$(OUTPUT_DIR)/tint-payload.elf +PAYLOAD_COMPRESSED=$(OUTPUT_DIR)/tint-payload.elf.lzma + +PAYLOAD-y=tint +PAYLOAD=tint + +# Add libpayload as a dependency +DEPENDS-y=libpayload Modified: buildrom-devel/packages/libpayload/libpayload.mk =================================================================== --- buildrom-devel/packages/libpayload/libpayload.mk 2008-04-16 23:27:24 UTC (rev 145) +++ buildrom-devel/packages/libpayload/libpayload.mk 2008-04-16 23:40:46 UTC (rev 146) @@ -1,5 +1,5 @@ LIBPAYLOAD_URL=svn://coreboot.org/repos/trunk/payloads/libpayload -LIBPAYLOAD_TAG=3235 +LIBPAYLOAD_TAG=3238 LIBPAYLOAD_DIR=$(BUILD_DIR)/libpayload LIBPAYLOAD_SRC_DIR=$(LIBPAYLOAD_DIR)/svn Added: buildrom-devel/packages/tint/tint.mk =================================================================== --- buildrom-devel/packages/tint/tint.mk (rev 0) +++ buildrom-devel/packages/tint/tint.mk 2008-04-16 23:40:46 UTC (rev 146) @@ -0,0 +1,55 @@ +TINT_ORIG_URL=http://ftp.debian.org/debian/pool/main/t/tint/ +TINT_TARBALL=tint_0.03b.tar.gz +TINT_PATCH_REV=3239 +TINT_PATCH_URL="http://tracker.coreboot.org/trac/coreboot/browser/trunk/payloads/external/t…" +TINT_PATCH=libpayload_tint.patch + +TINT_DIR=$(BUILD_DIR)/tint +TINT_SRC_DIR=$(TINT_DIR)/tint-0.03b +TINT_STAMP_DIR=$(TINT_DIR)/stamps +TINT_LOG_DIR=$(TINT_DIR)/logs + +ifeq ($(CONFIG_VERBOSE),y) +TINT_BUILD_LOG=/dev/stdout +else +TINT_BUILD_LOG=$(TINT_LOG_DIR)/build.log +endif + +$(SOURCE_DIR)/$(TINT_TARBALL): + @ wget --quiet -P $(SOURCE_DIR) -O $@ $(TINT_ORIG_URL)/$(TINT_TARBALL) + +$(SOURCE_DIR)/$(TINT_PATCH): + @ wget --quiet -P $(SOURCE_DIR) -O $@ $(TINT_PATCH_URL) + +$(TINT_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(TINT_TARBALL) | $(TINT_DIR) + @ tar -C $(TINT_DIR) -zxf $(SOURCE_DIR)/$(TINT_TARBALL) + @ mkdir -p $(TINT_STAMP_DIR) + @ touch $@ + +$(TINT_STAMP_DIR)/.patched: $(SOURCE_DIR)/$(TINT_PATCH) $(TINT_STAMP_DIR)/.unpacked + @ cat $(SOURCE_DIR)/$(TINT_PATCH) | patch -d $(TINT_SRC_DIR) -p1 + @ touch $@ + +$(TINT_SRC_DIR)/tint.elf: $(TINT_STAMP_DIR)/.patched | $(TINT_LOG_DIR) + @ echo "Building TINT..." + @ make -C $(TINT_SRC_DIR) LIBPAYLOAD_DIR=$(STAGING_DIR)/libpayload > $(TINT_BUILD_LOG) 2>&1 + +$(TINT_STAMP_DIR)/.copied: $(TINT_SRC_DIR)/tint.elf + @ mkdir -p $(shell dirname $(PAYLOAD_ELF)) + @ cp $(TINT_SRC_DIR)/tint.elf $(PAYLOAD_ELF) + @ touch $@ + +$(TINT_DIR) $(TINT_LOG_DIR): + @ mkdir -p $@ + +tint: $(TINT_STAMP_DIR)/.copied + +tint-clean: + @ echo "Cleaning TINT..." + @ if [ -d $(TINT_SRC_DIR) ]; then \ + make -C $(TINT_SRC_DIR) clean; \ + fi + @ rm -f $(TINT_STAMP_DIR)/.copied + +tint-distclean: + @ rm -rf $(TINT_DIR)

1 0

r145 - buildrom-devel/config/platforms
by svn＠coreboot.org 17 Apr '08

17 Apr '08

Author: uwe Date: 2008-04-17 01:27:24 +0200 (Thu, 17 Apr 2008) New Revision: 145 Modified: buildrom-devel/config/platforms/qemu.conf Log: Increase v2 svn version for QEMU target (trivial). This is required to get the svn:externals s/lxbios/nvramtool/ change, the build would otherwise fail. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: buildrom-devel/config/platforms/qemu.conf =================================================================== --- buildrom-devel/config/platforms/qemu.conf 2008-04-11 20:28:36 UTC (rev 144) +++ buildrom-devel/config/platforms/qemu.conf 2008-04-16 23:27:24 UTC (rev 145) @@ -24,7 +24,7 @@ ETHERBOOT_ARCH=i386 # coreboot-v2 configuration -CBV2_TAG=3093 +CBV2_TAG=3241 CBV2_CONFIG=Config.lb CBV2_PAYLOAD_FILE_EXT=elf CBV2_TDIR=qemu-x86

1 0

← Newer
1
...
20
21
22
23
24
25
26
...
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot April 2008