coreboot February 2008

coreboot@coreboot.org

77 participants
422 discussions

r118 - in buildrom-devel: . config/payloads
by svn＠coreboot.org 15 Feb '08

15 Feb '08

Author: myles Date: 2008-02-15 20:16:50 +0100 (Fri, 15 Feb 2008) New Revision: 118 Modified: buildrom-devel/Config.in buildrom-devel/Makefile buildrom-devel/config/payloads/payloads.conf Log: This patch uses lar to compress a payload, instead of pre-compressing it. Since we are already using lar to add the payload, this simplifies the build process. It also allows us to compress filo, which didn't work with v2. Thanks, Myles Signed-off-by: Myles Watson <myles at pel.cs.byu.edu> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net> Modified: buildrom-devel/Config.in =================================================================== --- buildrom-devel/Config.in 2008-02-13 21:33:04 UTC (rev 117) +++ buildrom-devel/Config.in 2008-02-15 19:16:50 UTC (rev 118) @@ -78,14 +78,17 @@ config USE_LZMA bool "Enable LZMA compression" - depends !PAYLOAD_OFW - depends !PAYLOAD_FILO - depends !PAYLOAD_ETHERBOOT + depends !(PAYLOAD_OFW && COREBOOT_V2) + depends !(PAYLOAD_FILO && COREBOOT_V2) + depends !(PAYLOAD_ETHERBOOT && COREBOOT_V2) default y help - Precompress the payload with LZMA. This doesn't work - for FILO, OFW, or ETHERBOOT. + Precompress the payload with LZMA when using coreboot v2. This doesn't + work for FILO, OFW, or ETHERBOOT. + When using COREBOOT_V3, parse the elf and have lar compress the files. + This works with all ELF payloads. + config CB_USE_BUILD bool "Specify a coreboot build dir" depends ADVANCED Modified: buildrom-devel/Makefile =================================================================== --- buildrom-devel/Makefile 2008-02-13 21:33:04 UTC (rev 117) +++ buildrom-devel/Makefile 2008-02-15 19:16:50 UTC (rev 118) @@ -69,9 +69,17 @@ rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) else +# If compressing the payload in v3, parse the elf and tell lar to compress it. +# Parsing the elf without compression bloats the ROM with bss zeroes. +ifeq ($(CONFIG_USE_LZMA),y) +LAR_PAYLOAD_FLAGS=-a -e -C lzma +else +LAR_PAYLOAD_FLAGS=-a +endif + rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) @ cp $(CBV3_OUTPUT) $(TARGET_ROM_FILE) - @ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(PAYLOAD_TARGET):normal/payload + @ $(STAGING_DIR)/bin/lar $(LAR_PAYLOAD_FLAGS) $(TARGET_ROM_FILE) $(PAYLOAD_TARGET):normal/payload @ for file in `ls $(ROM_DIR)`; do \ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(ROM_DIR)/$$file:$$file; \ done Modified: buildrom-devel/config/payloads/payloads.conf =================================================================== --- buildrom-devel/config/payloads/payloads.conf 2008-02-13 21:33:04 UTC (rev 117) +++ buildrom-devel/config/payloads/payloads.conf 2008-02-15 19:16:50 UTC (rev 118) @@ -27,8 +27,11 @@ include $(CONFIG_DIR)/payloads/$(PCONF-y) -# Add LZMA if it is enabled +# Add LZMA if it is enabled and we are using v2 +ifeq ($(CONFIG_COREBOOT_V2),y) HOSTTOOLS-$(CONFIG_USE_LZMA) += lzma +endif + HOSTTOOLS-$(CONFIG_BUILD_QEMU) += qemu # Sanity check @@ -38,19 +41,25 @@ endif ifeq ($(CONFIG_USE_LZMA),y) +ifeq ($(CONFIG_COREBOOT_V2),y) ifeq ($(PAYLOAD_COMPRESSED),) $(error You must specify a compressed target) endif endif +endif # Set the payload target (if it wasn't set by the config - warning # there be dragons here if everything isn't aligned) ifeq ($(PAYLOAD_TARGET),) -ifeq ($(CONFIG_USE_LZMA),y) -PAYLOAD_TARGET=$(PAYLOAD_COMPRESSED) -else -PAYLOAD_TARGET=$(PAYLOAD_ELF) + ifeq ($(CONFIG_COREBOOT_V2),y) + ifeq ($(CONFIG_USE_LZMA),y) + PAYLOAD_TARGET=$(PAYLOAD_COMPRESSED) + else + PAYLOAD_TARGET=$(PAYLOAD_ELF) + endif + else + PAYLOAD_TARGET=$(PAYLOAD_ELF) + endif endif -endif

1 0

r3103 build service
by coreboot information 15 Feb '08

15 Feb '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "stepan" checked in revision 3103 to the coreboot source repository and caused the following changes: Change Log: Importing mkelfimage from ftp://ftp.lnxi.com/pub/mkelfImage/mkelfImage-2.7.tar.gz Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3103&device=serengeti_chee… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Denver meeting
by ron minnich 15 Feb '08

15 Feb '08

Denver is looking better and better, more announcements later. Be sure if you are going to register. Speakers for far AMD Sun EFF Core systems sandia national labs If you want to talk, please let me know. thanks ron

1 0

r3103 - in trunk/util: . mkelfImage mkelfImage/arch mkelfImage/arch/i386 mkelfImage/arch/i386/include mkelfImage/arch/i386/include/arch mkelfImage/arch/ia64 mkelfImage/arch/ia64/include mkelfImage/config mkelfImage/include mkelfImage/kunzip_src mkelfImage/kunzip_src/arch mkelfImage/kunzip_src/arch/alpha mkelfImage/kunzip_src/arch/alpha/include mkelfImage/kunzip_src/arch/alpha/lib mkelfImage/kunzip_src/arch/i386 mkelfImage/kunzip_src/arch/i386/include mkelfImage/kunzip_src/arch/i386/lib mkelfImage
by svn＠coreboot.org 15 Feb '08

15 Feb '08

Author: stepan Date: 2008-02-15 19:16:06 +0100 (Fri, 15 Feb 2008) New Revision: 3103 Added: trunk/util/mkelfImage/ trunk/util/mkelfImage/AUTHORS trunk/util/mkelfImage/COPYING trunk/util/mkelfImage/Makefile trunk/util/mkelfImage/Makefile.conf.in trunk/util/mkelfImage/News trunk/util/mkelfImage/arch/ trunk/util/mkelfImage/arch/i386/ trunk/util/mkelfImage/arch/i386/include/ trunk/util/mkelfImage/arch/i386/include/arch/ trunk/util/mkelfImage/arch/i386/include/arch/io.h trunk/util/mkelfImage/arch/i386/include/limits.h trunk/util/mkelfImage/arch/i386/include/stdint.h trunk/util/mkelfImage/arch/ia64/ trunk/util/mkelfImage/arch/ia64/include/ trunk/util/mkelfImage/arch/ia64/include/limits.h trunk/util/mkelfImage/arch/ia64/include/stdint.h trunk/util/mkelfImage/config/ trunk/util/mkelfImage/config/config.guess trunk/util/mkelfImage/config/config.sub trunk/util/mkelfImage/config/install-sh trunk/util/mkelfImage/configure trunk/util/mkelfImage/configure.ac trunk/util/mkelfImage/include/ trunk/util/mkelfImage/include/elf.h trunk/util/mkelfImage/include/elf_boot.h trunk/util/mkelfImage/include/linuxbios_tables.h trunk/util/mkelfImage/include/mkelfImage.h trunk/util/mkelfImage/kunzip_src/ trunk/util/mkelfImage/kunzip_src/arch/ trunk/util/mkelfImage/kunzip_src/arch/alpha/ trunk/util/mkelfImage/kunzip_src/arch/alpha/include/ trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h trunk/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/ trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S trunk/util/mkelfImage/kunzip_src/arch/i386/ trunk/util/mkelfImage/kunzip_src/arch/i386/include/ trunk/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h trunk/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h trunk/util/mkelfImage/kunzip_src/arch/i386/lib/ trunk/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile trunk/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds trunk/util/mkelfImage/kunzip_src/arch/i386/lib/start.S trunk/util/mkelfImage/kunzip_src/include/ trunk/util/mkelfImage/kunzip_src/include/stdarg.h trunk/util/mkelfImage/kunzip_src/include/stdlib.h trunk/util/mkelfImage/kunzip_src/include/string.h trunk/util/mkelfImage/kunzip_src/include/types.h trunk/util/mkelfImage/kunzip_src/lib/ trunk/util/mkelfImage/kunzip_src/lib/inflate.c trunk/util/mkelfImage/kunzip_src/lib/kunzip.c trunk/util/mkelfImage/kunzip_src/lib/malloc.c trunk/util/mkelfImage/kunzip_src/lib/memcmp.c trunk/util/mkelfImage/kunzip_src/lib/memcpy.c trunk/util/mkelfImage/kunzip_src/lib/memset.c trunk/util/mkelfImage/linux-i386/ trunk/util/mkelfImage/linux-i386/Makefile trunk/util/mkelfImage/linux-i386/convert.bin.c trunk/util/mkelfImage/linux-i386/convert.h trunk/util/mkelfImage/linux-i386/convert.lds trunk/util/mkelfImage/linux-i386/convert_params.c trunk/util/mkelfImage/linux-i386/head.S trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c trunk/util/mkelfImage/linux-i386/uniform_boot.h trunk/util/mkelfImage/linux-i386/x86-linux.h trunk/util/mkelfImage/linux-ia64/ trunk/util/mkelfImage/linux-ia64/Makefile trunk/util/mkelfImage/linux-ia64/convert.bin.c trunk/util/mkelfImage/linux-ia64/convert.h trunk/util/mkelfImage/linux-ia64/convert.lds trunk/util/mkelfImage/linux-ia64/convert_params.c trunk/util/mkelfImage/linux-ia64/head.S trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c trunk/util/mkelfImage/main/ trunk/util/mkelfImage/main/Makefile trunk/util/mkelfImage/main/mkelfImage.c trunk/util/mkelfImage/main/mkelfImage.man trunk/util/mkelfImage/mkelfImage.spec.in trunk/util/mkelfImage/util/ trunk/util/mkelfImage/util/Makefile trunk/util/mkelfImage/util/bin-to-hex.c Log: Importing mkelfimage from ftp://ftp.lnxi.com/pub/mkelfImage/mkelfImage-2.7.tar.gz Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Added: trunk/util/mkelfImage/AUTHORS =================================================================== --- trunk/util/mkelfImage/AUTHORS (rev 0) +++ trunk/util/mkelfImage/AUTHORS 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,4 @@ +Eric Biederman <ebiederman(a)lnxi.com> +Joshua Aune <luken(a)lnxi.com> +Jake Page <jake(a)CS.Stanford.EDU> +Andrew Ip <aip(a)cwlinux.com> Added: trunk/util/mkelfImage/COPYING =================================================================== --- trunk/util/mkelfImage/COPYING (rev 0) +++ trunk/util/mkelfImage/COPYING 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,341 @@ + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. Added: trunk/util/mkelfImage/Makefile =================================================================== --- trunk/util/mkelfImage/Makefile (rev 0) +++ trunk/util/mkelfImage/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,118 @@ +include Makefile.conf +VERSION:=2.7 +RELEASE_DATE:=27 March 2006 +PACKAGE:=mkelfImage + +# You can specify DESTDIR on the command line to do a add +# a prefix to the install so it doesn't really happen +# Useful for building binary packages +DESTDIR = +CWD:=$(shell pwd) +OBJDIR:=objdir + +pkgdatadir = $(datadir)/$(PACKAGE) +pkglibdir = $(libdir)/$(PACKAGE) +pkgincludedir = $(includedir)/$(PACKAGE) + +CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"' -I include +HOST_CPPFLAGS=$(CPPFLAGS) +I386_CPPFLAGS=$(CPPFLAGS) -I arch/i386/include +IA64_CPPFLAGS=$(CPPFLAGS) -I arch/ia64/include + +GENERATED_SRCS:=\ + ./configure \ + ./linux-i386/convert.bin.c\ + ./linux-ia64/convert.bin.c + +SPEC=$(OBJDIR)/mkelfImage-$(VERSION).spec +TARBALL=$(OBJDIR)/mkelfImage-$(VERSION).tar.gz +SRCS:=$(shell find ./AUTHORS ./COPYING ./Makefile ./Makefile.conf.in ./News \ + ./configure.ac \ + ./mkelfImage.spec.in \ + ./config \ + ./kunzip_src \ + ./main ./util ./include ./arch \ + ./linux-i386 \ + ./linux-ia64 \ + ! -path '*CVS*' ! -name '*~' ! -name '.*' -type f -print ) +SRCS+=$(GENERATED_SRCS) +PSRCS:=$(patsubst ./%,mkelfImage-$(VERSION)/%,$(SRCS)) +PSRCS+=./mkelfImage-$(VERSION).spec + +SBIN_TARGETS=$(OBJDIR)/sbin/mkelfImage +MAN8_TARGETS=$(OBJDIR)/man/man8/mkelfImage.8 + +TARGETS:=$(SBIN_TARGETS) $(MAN8_TARGETS) + +DEPS:= Makefile Makefile.conf +all: $(TARGETS) + +include main/Makefile +include util/Makefile +include linux-i386/Makefile +include linux-ia64/Makefile + + +clean:: + @$(RM) -rf objdir + @$(RM) -rf rpm + @$(RM) -f config.log config.status config.cache + @$(RM) -f $(SBIN_TARGETS) $(MAN1_TARGETS) + @$(RM) -f mkelfImage-$(VERSION) $(TARBALL) + +dist-clean:: clean + @$(FIND) . -type f -name '*~' | xargs $(RM) -f + @$(RM) Makefile.conf + +maintainer-clean:: dist-clean + @$(RM) -f $(SPEC) $(GENERATED_SRCS) + + +install: $(TARGETS) + $(MKDIR) -p $(DESTDIR)/$(pkgdatadir)/elf32-i386/ $(DESTDIR)/$(sbindir) $(DESTDIR)/$(mandir)/man8 + $(CP) -ar $(SBIN_TARGETS) $(DESTDIR)/$(sbindir)/ + $(CP) -ar $(MAN8_TARGETS) $(DESTDIR)/$(mandir)/man8/ + + +#%.1 : %.pl Makefile +# mkdir -p $(@D) +# pod2man --date="$(RELEASE_DATE)" --release="$(VERSION)" $*.pl > $@ + + +tarball: $(TARBALL) + + +$(TARBALL): $(SRCS) $(SPEC) + $(MKDIR) -p $(OBJDIR) + $(RM) -f $(OBJDIR)/mkelfImage-$(VERSION) + $(LN) -s .. $(OBJDIR)/mkelfImage-$(VERSION) + (cd $(OBJDIR); $(TAR) -cf - $(PSRCS) | gzip -9) > $@ + +rpm: $(TARBALL) + $(MKDIR) -p $(OBJDIR)/RPM $(OBJDIR)/SRPM $(OBJDIR)/BUILD $(OBJDIR)/SPECS $(OBJDIR)/TMP + unset MAKEFLAGS MAKELEVEL; \ + $(RPM) -ta \ + --define '_rpmdir $(CWD)/$(OBJDIR)/RPM' \ + --define '_srcrpmdir $(CWD)/$(OBJDIR)/SRPM' \ + --define '_builddir $(CWD)/$(OBJDIR)/BUILD' \ + --define '_specdir $(CWD)/$(OBJDIR)/SPECS' \ + --define '_tmppath $(CWD)/$(OBJDIR)/TMP' \ + $(TARBALL) + +Makefile.conf: Makefile.conf.in configure + /bin/sh ./configure + + +configure: configure.ac + autoconf + $(RM) -rf autom4te.cache + +$(SPEC): mkelfImage.spec.in Makefile + $(SED) -e 's,^Version: $$,Version: $(VERSION),' $< > $@ + + +.PHONY: echo install realinstall + + +echo: + echo $(SRCS) Added: trunk/util/mkelfImage/Makefile.conf.in =================================================================== --- trunk/util/mkelfImage/Makefile.conf.in (rev 0) +++ trunk/util/mkelfImage/Makefile.conf.in 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,46 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ + +bindir=@bindir@ +sbindir=@sbindir@ +libexecdir=@libexecdir@ +datadir=@datadir@ +sysconfdir=@sysconfdir@ +sharedstatedir=@sharedstatedir@ +localstatedir=@localstatedir@ +libdir=@libdir@ +infodir=@infodir@ +mandir=@mandir@ +includedir=@includedir@ + +DEFS=@DEFS@ +LIBS=@LIBS@ +HOST_CC=@HOST_CC@ +HOST_CFLAGS=@HOST_CFLAGS@ $(DEFS) + +I386_CC =@I386_CC@ +I386_LD =@I386_LD@ +I386_AS =@I386_AS@ +I386_CPP =@I386_CPP@ +I386_OBJCOPY=@I386_OBJCOPY@ +I386_CFLAGS =@I386_CFLAGS@ +I386_ASFLAGS=@I386_ASFLAGS@ +I386_LDFLAGS=@I386_LDFLAGS@ + +IA64_CC =@IA64_CC@ +IA64_LD =@IA64_LD@ +IA64_AS =@IA64_AS@ +IA64_CPP =@IA64_CPP@ +IA64_OBJCOPY=@IA64_OBJCOPY@ +IA64_CFLAGS =@IA64_CFLAGS@ +IA64_ASFLAGS=@IA64_ASFLAGS@ +IA64_LDFLAGS=@IA64_LDFLAGS@ + +MKDIR=@MKDIR@ +RM=@RM@ +CP=@CP@ +LN=@LN@ +TAR=@TAR@ +RPM=@RPM@ +SED=@SED@ +FIND=@FIND@ Added: trunk/util/mkelfImage/News =================================================================== --- trunk/util/mkelfImage/News (rev 0) +++ trunk/util/mkelfImage/News 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,123 @@ +* 2.6 14 March 2006 +- Fix the i386-linux probe code so it does not get confused by + bzImages that are also ELF executables. +- Changed value of GDTLOC and REAL_MODE_DATA_LOC to be below + 512kb. This allows for booting on machines whose BIOS reports + only 512kb of memory below 1MB. + +* 2.5 24 April 2003 +- Fix the checksum code so that it checksums the bss sections as well. + How I missed the checksum code was broken in 2.4 I don't know. + +* 2.4 22 April 2003 +- Fix code that failed to write more than the first ELF note. + Resulting in checksums and other information not being present + in the generated ELF image. + This bug has been present since mkelfImage-2.0 + +* 2.3 7 Febuary 2003 +- Disable debugging code on the itanium that is not always safe. + +* 2.2 6 Febuary 2003 +- Always read the correct pointer when an ELF boot header is found. +- Add a printf implementation to i386-linux/convert_param.c +- Minor man page updates. + +* 2.1 27 January 2003 +- Allow an arbitrary number of kernel headers in mkelf-linux-ia64.c +- Remove unused entries from Makefile.conf.in +- Correctly report the elf note size. +- Check for broken binutils when we run, so mkelfImage does not generate incorrect images. +- Add automatic decompress of kernel images + +* 2.0 13 January 2003 +- Convert everything to C +- Add itanium support + +* 1.19 20 December 2002 + - Update to handle a Bhdr passed via the C calling conventions. + +* 1.18 9 November 2002 + - Update to work with binutils 2.13.x + +* 1.17 17 October 2002 + - Add an rpm target + - Fix Source0 in the rpm spec file + - Linux 2.5.x support + +* 1.16 29 August 2002 + - Include the source for my spec file in the tarball. + - Fix the make install target + +* 1.15 23 August 2002 + - Rewrote the perl ip checksum code to be reasonably fast + - Fixes to the initial parameter passing in head.S thanks to Jake Page <jake(a)CS.Stanford.EDU> + - Initial cross compiling support thanks to Jake Page <jake(a)CS.Stanford.EDU> + - Official specfile thanks to Andrew Ip <aip(a)cwlinux.com> + - Autoconf support Josh Aune <lunke(a)linuxnetworx.com> + +* 1.14 28 June 2002 + - Use much less complex ld magic (removed the use of PHDRS directive) + - Fix a small bug in the LinuxBIOS checksum verification code (only affected odd length tables) + +* 1.13 10 May 2002 + Include the version number in mkelfImage. + +* 1.12 26 January 2002 + Better firmware detection, and stripping excess symbols from the + generated object. + +* 1.11 24 January 2002 + Bug fix to command line processing. + +* 1.10 21 January 2002 + Starting using the PHDRS directive which many versions of ld cannot + handle correctly. The symptom is generally a file that is 9MB in + size. + + Start computing a checksum on the Image. + + Include an ELF note section in the image for out of band + information (checksum, program name, etc). + +* 1.9 7 January 2002 + I changed LinuxBIOS (in LinuxBIOS) from passing it's information + locally, to passing it in a global table that is always present. + So that whoever needs that information can get it unfiltered. And + because it isn't being passed around it has less chance of + becomming corrupt. Globals for global information are good :) + Version 1.9 goes out and finds that table. + +* 1.8 10 December 2001 + Move the ramdisk up even higher in memory. + Better debugging of multiboot parameters + Pass the correct values for a vga screen instead of telling the + kernel we have EGA... + +* 1.7 18 May 2001 + Warn when I don't have information about the bootloader. + Include a ELF compreressor that works on alpha && x86 + There is no good way to apply it though. + +* 1.6 1 Febuary 2001 + Code cleanup in bzImage support. + +* 1.5 1 Febuary 2001 + Add support for bzImage + +* 1.4 ??? + ??? + +* 1.3 27 December 2000 + Minor bug fixes for working with the e820 memory map. + +* 1.2 18 December 2000 + Work around for some versions of ld not treating /dev/null and an + empty file the same + +* 1.1 30 November 2000 + Fix for ramdisks and large amounts of memory with 2.2 series + kernels. + +* 1.0 7 November 2000 + Initial release (supports vmlinux && bvmlinux) Added: trunk/util/mkelfImage/arch/i386/include/arch/io.h =================================================================== --- trunk/util/mkelfImage/arch/i386/include/arch/io.h (rev 0) +++ trunk/util/mkelfImage/arch/i386/include/arch/io.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,64 @@ +#ifndef ARCH_IO_H +#define ARCH_IO_H + +#include <stdint.h> +/* Helper functions for directly doing I/O */ + +extern inline uint8_t inb(uint16_t port) +{ + uint8_t result; + + __asm__ __volatile__ ( + "inb %w1,%0" + :"=a" (result) + :"Nd" (port)); + return result; +} + +extern inline uint16_t inw(uint16_t port) +{ + uint16_t result; + + __asm__ __volatile__ ( + "inw %w1,%0" + :"=a" (result) + :"Nd" (port)); + return result; +} + +extern inline uint32_t inl(uint32_t port) +{ + uint32_t result; + + __asm__ __volatile__ ( + "inl %w1,%0" + :"=a" (result) + :"Nd" (port)); + return result; +} + +extern inline void outb (uint8_t value, uint16_t port) +{ + __asm__ __volatile__ ( + "outb %b0,%w1" + : + :"a" (value), "Nd" (port)); +} + +extern inline void outw (uint16_t value, uint16_t port) +{ + __asm__ __volatile__ ( + "outw %w0,%w1" + : + :"a" (value), "Nd" (port)); +} + +extern inline void outl (uint32_t value, uint16_t port) +{ + __asm__ __volatile__ ( + "outl %0,%w1" + : + :"a" (value), "Nd" (port)); +} + +#endif /* ARCH_IO_H */ Added: trunk/util/mkelfImage/arch/i386/include/limits.h =================================================================== --- trunk/util/mkelfImage/arch/i386/include/limits.h (rev 0) +++ trunk/util/mkelfImage/arch/i386/include/limits.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,58 @@ +#ifndef LIMITS_H +#define LIMITS_H 1 + + +/* Number of bits in a `char' */ +#define CHAR_BIT 8 + +/* Minimum and maximum values a `signed char' can hold */ +#define SCHAR_MIN (-128) +#define SCHAR_MAX 127 + +/* Maximum value an `unsigned char' can hold. (Minimum is 0.) */ +#define UCHAR_MAX 255 + +/* Minimum and maximum values a `char' can hold */ +#define CHAR_MIN SCHAR_MIN +#define CHAR_MAX SCHAR_MAX + +/* Minimum and maximum values a `signed short int' can hold */ +#define SHRT_MIN (-32768) +#define SHRT_MAX 32767 + +/* Maximum value an `unsigned short' can hold. (Minimum is 0.) */ +#define USHRT_MAX 65535 + + +/* Minimum and maximum values a `signed int' can hold */ +#define INT_MIN (-INT_MAX - 1) +#define INT_MAX 2147483647 + +/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ +#define UINT_MAX 4294967295U + + +/* Minimum and maximum values a `signed int' can hold */ +#define INT_MIN (-INT_MAX - 1) +#define INT_MAX 2147483647 + +/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ +#define UINT_MAX 4294967295U + +/* Minimum and maximum values a `signed long' can hold */ +#define LONG_MAX 2147483647L +#define LONG_MIN (-LONG_MAX - 1L) + +/* Maximum value an `unsigned long' can hold. (Minimum is 0.) */ +#define ULONG_MAX 4294967295UL + +/* Minimum and maximum values a `signed long long' can hold */ +#define LLONG_MAX 9223372036854775807LL +#define LLONG_MIN (-LONG_MAX - 1LL) + + +/* Maximum value an `unsigned long long' can hold. (Minimum is 0.) */ +#define ULLONG_MAX 18446744073709551615ULL + + +#endif /* LIMITS_H */ Added: trunk/util/mkelfImage/arch/i386/include/stdint.h =================================================================== --- trunk/util/mkelfImage/arch/i386/include/stdint.h (rev 0) +++ trunk/util/mkelfImage/arch/i386/include/stdint.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,16 @@ +#ifndef STDINT_H +#define STDINT_H + +typedef unsigned long size_t; + +typedef unsigned char uint8_t; +typedef unsigned short uint16_t; +typedef unsigned int uint32_t; +typedef unsigned long long uint64_t; + +typedef signed char int8_t; +typedef signed short int16_t; +typedef signed int int32_t; +typedef signed long long int64_t; + +#endif /* STDINT_H */ Added: trunk/util/mkelfImage/arch/ia64/include/limits.h =================================================================== --- trunk/util/mkelfImage/arch/ia64/include/limits.h (rev 0) +++ trunk/util/mkelfImage/arch/ia64/include/limits.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,57 @@ +#ifndef LIMITS_H +#define LIMITS_H 1 + +/* Number of bits in a `char' */ +#define CHAR_BIT 8 + +/* Minimum and maximum values a `signed char' can hold */ +#define SCHAR_MIN (-128) +#define SCHAR_MAX 127 + +/* Maximum value an `unsigned char' can hold. (Minimum is 0.) */ +#define UCHAR_MAX 255 + +/* Minimum and maximum values a `char' can hold */ +#define CHAR_MIN SCHAR_MIN +#define CHAR_MAX SCHAR_MAX + +/* Minimum and maximum values a `signed short int' can hold */ +#define SHRT_MIN (-32768) +#define SHRT_MAX 32767 + +/* Maximum value an `unsigned short' can hold. (Minimum is 0.) */ +#define USHRT_MAX 65535 + + +/* Minimum and maximum values a `signed int' can hold */ +#define INT_MIN (-INT_MAX - 1) +#define INT_MAX 2147483647 + +/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ +#define UINT_MAX 4294967295U + + +/* Minimum and maximum values a `signed int' can hold */ +#define INT_MIN (-INT_MAX - 1) +#define INT_MAX 2147483647 + +/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */ +#define UINT_MAX 4294967295U + +/* Minimum and maximum values a `signed long' can hold */ +#define LONG_MAX 9223372036854775807L +#define LONG_MIN (-LONG_MAX - 1L) + +/* Maximum value an `unsigned long' can hold. (Minimum is 0.) */ +#define ULONG_MAX 18446744073709551615UL + +/* Minimum and maximum values a `signed long long' can hold */ +#define LLONG_MAX 9223372036854775807LL +#define LLONG_MIN (-LONG_MAX - 1LL) + + +/* Maximum value an `unsigned long long' can hold. (Minimum is 0.) */ +#define ULLONG_MAX 18446744073709551615ULL + + +#endif /* LIMITS_H */ Added: trunk/util/mkelfImage/arch/ia64/include/stdint.h =================================================================== --- trunk/util/mkelfImage/arch/ia64/include/stdint.h (rev 0) +++ trunk/util/mkelfImage/arch/ia64/include/stdint.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,16 @@ +#ifndef STDINT_H +#define STDINT_H + +typedef unsigned long size_t; + +typedef unsigned char uint8_t; +typedef unsigned short uint16_t; +typedef unsigned int uint32_t; +typedef unsigned long uint64_t; + +typedef signed char int8_t; +typedef signed short int16_t; +typedef signed int int32_t; +typedef signed long int64_t; + +#endif /* STDINT_H */ Added: trunk/util/mkelfImage/config/config.guess =================================================================== --- trunk/util/mkelfImage/config/config.guess (rev 0) +++ trunk/util/mkelfImage/config/config.guess 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,1321 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. + +timestamp='2002-03-20' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner <per(a)bothner.com>. +# Please send patches to <config-patches(a)gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches(a)gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + + +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c ; + for c in cc gcc c89 c99 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $dummy.c $dummy.o $dummy.rel ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi(a)noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <<EOF >$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main +main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + eval $set_cc_for_build + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; + esac + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee(a)wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` \ + && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; + esac + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:3*) + echo i386-pc-interix3 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + rm -f $dummy.c + test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + rm -f $dummy.c + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel(a)ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes(a)openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf(a)swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green(a)stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach $[0-9]*$.*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + ftp://ftp.gnu.org/pub/gnu/config/ + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches(a)gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: Property changes on: trunk/util/mkelfImage/config/config.guess ___________________________________________________________________ Added: svn:executable + * Added: trunk/util/mkelfImage/config/config.sub =================================================================== --- trunk/util/mkelfImage/config/config.sub (rev 0) +++ trunk/util/mkelfImage/config/config.sub 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,1443 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. + +timestamp='2002-03-07' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to <config-patches(a)gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches(a)gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dsp16xx \ + | fr30 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el | mips64vr4300 \ + | mips64vr4300el | mips64vr5000 | mips64vr5000el \ + | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ + | mipsisa32 | mipsisa64 \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ + | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ + | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3d) + basic_machine=alpha-cray + os=-unicos + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + windows32) + basic_machine=i386-pc + os=-windows32-msvcrt + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh3eb | sh4eb) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: Property changes on: trunk/util/mkelfImage/config/config.sub ___________________________________________________________________ Added: svn:executable + * Added: trunk/util/mkelfImage/config/install-sh =================================================================== --- trunk/util/mkelfImage/config/install-sh (rev 0) +++ trunk/util/mkelfImage/config/install-sh 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,251 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 Property changes on: trunk/util/mkelfImage/config/install-sh ___________________________________________________________________ Added: svn:executable + * Added: trunk/util/mkelfImage/configure =================================================================== --- trunk/util/mkelfImage/configure (rev 0) +++ trunk/util/mkelfImage/configure 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,5276 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '$a$' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ + X"$0" : 'X$//$$' \| \ + X"$0" : 'X$/$$' \| \ + . : '$.$' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } + /^X\/$\/\/$$/{ s//\1/; q; } + /^X\/$\/$.*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '$a$' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="Makefile.conf.in" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#if HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#if STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# if HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#if HAVE_STRINGS_H +# include <strings.h> +#endif +#if HAVE_INTTYPES_H +# include <inttypes.h> +#else +# if HAVE_STDINT_H +# include <stdint.h> +# endif +#endif +#if HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT MKDIR RM CP LN TAR RPM SED FIND CPP EGREP LD ac_ct_LD AS ac_ct_AS OBJCOPY ac_ct_OBJCOPY I386_CC I386_CPP I386_LD I386_AS I386_OBJCOPY IA64_CC IA64_CPP IA64_LD IA64_AS IA64_OBJCOPY HOST_CC HOST_CFLAGS I386_CFLAGS I386_ASFLAGS I386_LDFLAGS IA64_CFLAGS IA64_ASFLAGS IA64_LDFLAGS LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=$.*$'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-$.*$'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-$[^=]*$'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-$.*$'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ + X"$0" : 'X$//$[^/]' \| \ + X"$0" : 'X$//$$' \| \ + X"$0" : 'X$/$' \| \ + . : '$.$' 2>/dev/null || +echo X"$0" | + sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X$\/\/$[^/].*/{ s//\1/; q; } + /^X$\/\/$$/{ s//\1/; q; } + /^X$\/$.*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%$[^\\/]$[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-i386 enable building i386 code + --with-ia64 enable building ia64 code + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have + headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_$[a-zA-Z_0-9]*$_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + +ac_aux_dir= +for ac_dir in ./config $srcdir/./config; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + + + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` + + +#AC_CANONICAL_TARGET + + +case $host_cpu in + i?86 ) + target_cpu="i386" + ;; + * ) + target_cpu="$host_cpu" + ;; +esac + +targets="" + + +# Check whether --with-i386 or --without-i386 was given. +if test "${with_i386+set}" = set; then + withval="$with_i386" + if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi +else + with_i386="no" +fi; + + +# Check whether --with-ia64 or --without-ia64 was given. +if test "${with_ia64+set}" = set; then + withval="$with_ia64" + if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi +else + with_ia64="no" +fi; + +with_default="no" +if test "$with_i386" = "no" && + test "$with_ia64" = "no" ; then + with_default=`echo $target_cpu | tr a-z A-Z` +fi + +{ echo "$as_me:$LINENO: with_default=$with_default" >&5 +echo "$as_me: with_default=$with_default" >&6;} +{ echo "$as_me:$LINENO: with_i386=$with_i386" >&5 +echo "$as_me: with_i386=$with_i386" >&6;} +{ echo "$as_me:$LINENO: with_ia64=$with_ia64" >&5 +echo "$as_me: with_ia64=$with_ia64" >&6;} + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 + (eval $ac_compiler --version </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 + (eval $ac_compiler -v </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 + (eval $ac_compiler -V </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include <stdlib.h> +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Extract the first word of "mkdir", so it can be a program name with args. +set dummy mkdir; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_MKDIR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$MKDIR"; then + ac_cv_prog_MKDIR="$MKDIR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MKDIR="mkdir" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +MKDIR=$ac_cv_prog_MKDIR +if test -n "$MKDIR"; then + echo "$as_me:$LINENO: result: $MKDIR" >&5 +echo "${ECHO_T}$MKDIR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "rm", so it can be a program name with args. +set dummy rm; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RM"; then + ac_cv_prog_RM="$RM" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RM="rm" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RM=$ac_cv_prog_RM +if test -n "$RM"; then + echo "$as_me:$LINENO: result: $RM" >&5 +echo "${ECHO_T}$RM" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "cp", so it can be a program name with args. +set dummy cp; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CP"; then + ac_cv_prog_CP="$CP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CP="cp" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CP=$ac_cv_prog_CP +if test -n "$CP"; then + echo "$as_me:$LINENO: result: $CP" >&5 +echo "${ECHO_T}$CP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "ln", so it can be a program name with args. +set dummy ln; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_LN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$LN"; then + ac_cv_prog_LN="$LN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LN="ln" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +LN=$ac_cv_prog_LN +if test -n "$LN"; then + echo "$as_me:$LINENO: result: $LN" >&5 +echo "${ECHO_T}$LN" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "tar", so it can be a program name with args. +set dummy tar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_TAR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$TAR"; then + ac_cv_prog_TAR="$TAR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_TAR="tar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +TAR=$ac_cv_prog_TAR +if test -n "$TAR"; then + echo "$as_me:$LINENO: result: $TAR" >&5 +echo "${ECHO_T}$TAR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "rpm", so it can be a program name with args. +set dummy rpm; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RPM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RPM"; then + ac_cv_prog_RPM="$RPM" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RPM="rpm" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RPM=$ac_cv_prog_RPM +if test -n "$RPM"; then + echo "$as_me:$LINENO: result: $RPM" >&5 +echo "${ECHO_T}$RPM" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "sed", so it can be a program name with args. +set dummy sed; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$SED"; then + ac_cv_prog_SED="$SED" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_SED="sed" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +SED=$ac_cv_prog_SED +if test -n "$SED"; then + echo "$as_me:$LINENO: result: $SED" >&5 +echo "${ECHO_T}$SED" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "find", so it can be a program name with args. +set dummy find; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_FIND+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$FIND"; then + ac_cv_prog_FIND="$FIND" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_FIND="find" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +FIND=$ac_cv_prog_FIND +if test -n "$FIND"; then + echo "$as_me:$LINENO: result: $FIND" >&5 +echo "${ECHO_T}$FIND" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +if test "${ac_cv_header_zlib_h+set}" = set; then + echo "$as_me:$LINENO: checking for zlib.h" >&5 +echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_zlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_zlib_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking zlib.h usability" >&5 +echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <zlib.h> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking zlib.h presence" >&5 +echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <zlib.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: zlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: zlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: zlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: zlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: zlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for zlib.h" >&5 +echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_zlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_zlib_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_zlib_h" >&6 + +fi +if test $ac_cv_header_zlib_h = yes; then + echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5 +echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6 +if test "${ac_cv_lib_z_inflateInit_+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char inflateInit_ (); +int +main () +{ +inflateInit_ (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_z_inflateInit_=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_z_inflateInit_=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5 +echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6 +if test $ac_cv_lib_z_inflateInit_ = yes; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_ZLIB_H 1 +_ACEOF + LIBS="$LIBS -lz" +fi + +fi + + + +if test "with_default" != no ; then + if test "$CC" = no; then + { { echo "$as_me:$LINENO: error: cc not found" >&5 +echo "$as_me: error: cc not found" >&2;} + { (exit 1); exit 1; }; } + fi + eval "${with_default}_CC='$CC'" + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + if test "$CPP" = no; then + { { echo "$as_me:$LINENO: error: cpp not found" >&5 +echo "$as_me: error: cpp not found" >&2;} + { (exit 1); exit 1; }; } + fi + eval "${with_default}_CPP='$CPP'" + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args. +set dummy ${ac_tool_prefix}ld; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$LD"; then + ac_cv_prog_LD="$LD" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LD="${ac_tool_prefix}ld" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +LD=$ac_cv_prog_LD +if test -n "$LD"; then + echo "$as_me:$LINENO: result: $LD" >&5 +echo "${ECHO_T}$LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_LD"; then + ac_ct_LD=$LD + # Extract the first word of "ld", so it can be a program name with args. +set dummy ld; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_LD"; then + ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LD="ld" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="no" +fi +fi +ac_ct_LD=$ac_cv_prog_ac_ct_LD +if test -n "$ac_ct_LD"; then + echo "$as_me:$LINENO: result: $ac_ct_LD" >&5 +echo "${ECHO_T}$ac_ct_LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + LD=$ac_ct_LD +else + LD="$ac_cv_prog_LD" +fi + + if test "$LD" = no; then + { { echo "$as_me:$LINENO: error: ld not found" >&5 +echo "$as_me: error: ld not found" >&2;} + { (exit 1); exit 1; }; } + fi + eval "${with_default}_LD='$LD'" + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="no" +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + AS=$ac_ct_AS +else + AS="$ac_cv_prog_AS" +fi + + if test "$AS" = no; then + { { echo "$as_me:$LINENO: error: as not found" >&5 +echo "$as_me: error: as not found" >&2;} + { (exit 1); exit 1; }; } + fi + eval "${with_default}_AS='$AS'" + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args. +set dummy ${ac_tool_prefix}objcopy; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_OBJCOPY+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$OBJCOPY"; then + ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +OBJCOPY=$ac_cv_prog_OBJCOPY +if test -n "$OBJCOPY"; then + echo "$as_me:$LINENO: result: $OBJCOPY" >&5 +echo "${ECHO_T}$OBJCOPY" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_OBJCOPY"; then + ac_ct_OBJCOPY=$OBJCOPY + # Extract the first word of "objcopy", so it can be a program name with args. +set dummy objcopy; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_OBJCOPY"; then + ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJCOPY="objcopy" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_OBJCOPY" && ac_cv_prog_ac_ct_OBJCOPY="no" +fi +fi +ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY +if test -n "$ac_ct_OBJCOPY"; then + echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5 +echo "${ECHO_T}$ac_ct_OBJCOPY" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + OBJCOPY=$ac_ct_OBJCOPY +else + OBJCOPY="$ac_cv_prog_OBJCOPY" +fi + + if test "$OBJCOPY" = no; then + { { echo "$as_me:$LINENO: error: objcopy not found" >&5 +echo "$as_me: error: objcopy not found" >&2;} + { (exit 1); exit 1; }; } + fi + eval "${with_default}_OBJCOPY='$OBJCOPY'" + if test "$with_default" = "X86_64" ; then + with_i386=yes + fi +fi + +if test "$with_i386" != "no" ; then + cc="gcc -m32" + cpp=cpp + ld=ld + as="as -32" + objcopy=objcopy + if test "$with_i386" != "" -a "$with_i386" != "yes" ; then + cc="$with_i386-$cc" + cpp="$with_i386-$cpp" + ld="$with_i386-$ld" + as="$with_i386-$as" + objcopy="$with_i386-$objcopy" + fi + # Extract the first word of "$cc", so it can be a program name with args. +set dummy $cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_I386_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$I386_CC"; then + ac_cv_prog_I386_CC="$I386_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_I386_CC="$cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_I386_CC" && ac_cv_prog_I386_CC="""" +fi +fi +I386_CC=$ac_cv_prog_I386_CC +if test -n "$I386_CC"; then + echo "$as_me:$LINENO: result: $I386_CC" >&5 +echo "${ECHO_T}$I386_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$I386_CC" = no; then + + { { echo "$as_me:$LINENO: error: $cc not found" >&5 +echo "$as_me: error: $cc not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$cpp", so it can be a program name with args. +set dummy $cpp; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_I386_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$I386_CPP"; then + ac_cv_prog_I386_CPP="$I386_CPP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_I386_CPP="$cpp" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_I386_CPP" && ac_cv_prog_I386_CPP="""" +fi +fi +I386_CPP=$ac_cv_prog_I386_CPP +if test -n "$I386_CPP"; then + echo "$as_me:$LINENO: result: $I386_CPP" >&5 +echo "${ECHO_T}$I386_CPP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$I386_CPP" = no; then + { { echo "$as_me:$LINENO: error: $cpp not found" >&5 +echo "$as_me: error: $cpp not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$ld", so it can be a program name with args. +set dummy $ld; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_I386_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$I386_LD"; then + ac_cv_prog_I386_LD="$I386_LD" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_I386_LD="$ld" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_I386_LD" && ac_cv_prog_I386_LD="""" +fi +fi +I386_LD=$ac_cv_prog_I386_LD +if test -n "$I386_LD"; then + echo "$as_me:$LINENO: result: $I386_LD" >&5 +echo "${ECHO_T}$I386_LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$I386_AS" = no; then + { { echo "$as_me:$LINENO: error: $ld not found" >&5 +echo "$as_me: error: $ld not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$as", so it can be a program name with args. +set dummy $as; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_I386_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$I386_AS"; then + ac_cv_prog_I386_AS="$I386_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_I386_AS="$as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_I386_AS" && ac_cv_prog_I386_AS="""" +fi +fi +I386_AS=$ac_cv_prog_I386_AS +if test -n "$I386_AS"; then + echo "$as_me:$LINENO: result: $I386_AS" >&5 +echo "${ECHO_T}$I386_AS" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$I386_AS" = no; then + { { echo "$as_me:$LINENO: error: $as not found" >&5 +echo "$as_me: error: $as not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$objcopy", so it can be a program name with args. +set dummy $objcopy; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_I386_OBJCOPY+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$I386_OBJCOPY"; then + ac_cv_prog_I386_OBJCOPY="$I386_OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_I386_OBJCOPY="$objcopy" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_I386_OBJCOPY" && ac_cv_prog_I386_OBJCOPY="""" +fi +fi +I386_OBJCOPY=$ac_cv_prog_I386_OBJCOPY +if test -n "$I386_OBJCOPY"; then + echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5 +echo "${ECHO_T}$I386_OBJCOPY" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$I386_OBJCOPY" = no; then + { { echo "$as_me:$LINENO: error: $objcopy not found" >&5 +echo "$as_me: error: $objcopy not found" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +if test "$with_ia64" != "no" ; then + cc=gcc + cpp=cpp + ld=ld + as=as + objcopy=objcopy + if test "$with_ia64" != "" -a "$with_ia64" != "yes" ; then + cc="$with_ia64-$cc" + cpp="$with_ia64-$cpp" + ld="$with_ia64-$ld" + as="$with_ia64-$as" + objcopy="$with_ia64-$objcopy" + fi + # Extract the first word of "$cc", so it can be a program name with args. +set dummy $cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_IA64_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$IA64_CC"; then + ac_cv_prog_IA64_CC="$IA64_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_IA64_CC="$cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_IA64_CC" && ac_cv_prog_IA64_CC="""" +fi +fi +IA64_CC=$ac_cv_prog_IA64_CC +if test -n "$IA64_CC"; then + echo "$as_me:$LINENO: result: $IA64_CC" >&5 +echo "${ECHO_T}$IA64_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$IA64_CC" = no; then + + { { echo "$as_me:$LINENO: error: $cc not found" >&5 +echo "$as_me: error: $cc not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$cpp", so it can be a program name with args. +set dummy $cpp; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_IA64_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$IA64_CPP"; then + ac_cv_prog_IA64_CPP="$IA64_CPP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_IA64_CPP="$cpp" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_IA64_CPP" && ac_cv_prog_IA64_CPP="""" +fi +fi +IA64_CPP=$ac_cv_prog_IA64_CPP +if test -n "$IA64_CPP"; then + echo "$as_me:$LINENO: result: $IA64_CPP" >&5 +echo "${ECHO_T}$IA64_CPP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$IA64_CPP" = no; then + { { echo "$as_me:$LINENO: error: $cpp not found" >&5 +echo "$as_me: error: $cpp not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$ld", so it can be a program name with args. +set dummy $ld; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_IA64_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$IA64_LD"; then + ac_cv_prog_IA64_LD="$IA64_LD" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_IA64_LD="$ld" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_IA64_LD" && ac_cv_prog_IA64_LD="""" +fi +fi +IA64_LD=$ac_cv_prog_IA64_LD +if test -n "$IA64_LD"; then + echo "$as_me:$LINENO: result: $IA64_LD" >&5 +echo "${ECHO_T}$IA64_LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$IA64_AS" = no; then + { { echo "$as_me:$LINENO: error: $ld not found" >&5 +echo "$as_me: error: $ld not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$as", so it can be a program name with args. +set dummy $as; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_IA64_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$IA64_AS"; then + ac_cv_prog_IA64_AS="$IA64_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_IA64_AS="$as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_IA64_AS" && ac_cv_prog_IA64_AS="""" +fi +fi +IA64_AS=$ac_cv_prog_IA64_AS +if test -n "$IA64_AS"; then + echo "$as_me:$LINENO: result: $IA64_AS" >&5 +echo "${ECHO_T}$IA64_AS" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$IA64_AS" = no; then + { { echo "$as_me:$LINENO: error: $as not found" >&5 +echo "$as_me: error: $as not found" >&2;} + { (exit 1); exit 1; }; } + fi + # Extract the first word of "$objcopy", so it can be a program name with args. +set dummy $objcopy; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_IA64_OBJCOPY+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$IA64_OBJCOPY"; then + ac_cv_prog_IA64_OBJCOPY="$IA64_OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_IA64_OBJCOPY="$objcopy" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_IA64_OBJCOPY" && ac_cv_prog_IA64_OBJCOPY="""" +fi +fi +IA64_OBJCOPY=$ac_cv_prog_IA64_OBJCOPY +if test -n "$IA64_OBJCOPY"; then + echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5 +echo "${ECHO_T}$IA64_OBJCOPY" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + if test "$IA64_OBJCOPY" = no; then + { { echo "$as_me:$LINENO: error: $objcopy not found" >&5 +echo "$as_me: error: $objcopy not found" >&2;} + { (exit 1); exit 1; }; } + fi +fi + + + +HOST_CC=$CC +HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)' + +I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)' +I386_ASFLAGS='' +I386_LDFLAGS='-static --warn-multiple-gp --warn-common' + +IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)' +IA64_ASFLAGS='-mconstant-gp -mauto-pic' +IA64_LDFLAGS='-static --warn-multiple-gp --warn-common' + + + + + + + + + + + + + + + + + + + + + + + ac_config_files="$ac_config_files Makefile.conf" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^$[^=]*$=$.*$$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^$[^=]*=[ ]*$:*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*$[^ (][^ (]*([^)]*)$[ ]*$.*$,-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*$[^ ][^ ]*$[ ]*$.*$,-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '$a$' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ + X"$0" : 'X$//$$' \| \ + X"$0" : 'X$/$$' \| \ + . : '$.$' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } + /^X\/$\/\/$$/{ s//\1/; q; } + /^X\/$\/$.*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '$a$' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to <bug-autoconf(a)gnu.org>." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x$[^=]*$='` + ac_optarg=`expr "x$1" : 'x[^=]*=$.*$'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile.conf" ) CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@MKDIR@,$MKDIR,;t t +s,@RM@,$RM,;t t +s,@CP@,$CP,;t t +s,@LN@,$LN,;t t +s,@TAR@,$TAR,;t t +s,@RPM@,$RPM,;t t +s,@SED@,$SED,;t t +s,@FIND@,$FIND,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@LD@,$LD,;t t +s,@ac_ct_LD@,$ac_ct_LD,;t t +s,@AS@,$AS,;t t +s,@ac_ct_AS@,$ac_ct_AS,;t t +s,@OBJCOPY@,$OBJCOPY,;t t +s,@ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t +s,@I386_CC@,$I386_CC,;t t +s,@I386_CPP@,$I386_CPP,;t t +s,@I386_LD@,$I386_LD,;t t +s,@I386_AS@,$I386_AS,;t t +s,@I386_OBJCOPY@,$I386_OBJCOPY,;t t +s,@IA64_CC@,$IA64_CC,;t t +s,@IA64_CPP@,$IA64_CPP,;t t +s,@IA64_LD@,$IA64_LD,;t t +s,@IA64_AS@,$IA64_AS,;t t +s,@IA64_OBJCOPY@,$IA64_OBJCOPY,;t t +s,@HOST_CC@,$HOST_CC,;t t +s,@HOST_CFLAGS@,$HOST_CFLAGS,;t t +s,@I386_CFLAGS@,$I386_CFLAGS,;t t +s,@I386_ASFLAGS@,$I386_ASFLAGS,;t t +s,@I386_LDFLAGS@,$I386_LDFLAGS,;t t +s,@IA64_CFLAGS@,$IA64_CFLAGS,;t t +s,@IA64_ASFLAGS@,$IA64_ASFLAGS,;t t +s,@IA64_LDFLAGS@,$IA64_LDFLAGS,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X$//$[^/]' \| \ + X"$ac_file" : 'X$//$$' \| \ + X"$ac_file" : 'X$/$' \| \ + . : '$.$' 2>/dev/null || +echo X"$ac_file" | + sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X$\/\/$[^/].*/{ s//\1/; q; } + /^X$\/\/$$/{ s//\1/; q; } + /^X$\/$.*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X$//$[^/]' \| \ + X"$as_dir" : 'X$//$$' \| \ + X"$as_dir" : 'X$/$' \| \ + . : '$.$' 2>/dev/null || +echo X"$as_dir" | + sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X$\/\/$[^/].*/{ s//\1/; q; } + /^X$\/\/$$/{ s//\1/; q; } + /^X$\/$.*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + + Property changes on: trunk/util/mkelfImage/configure ___________________________________________________________________ Added: svn:executable + * Added: trunk/util/mkelfImage/configure.ac =================================================================== --- trunk/util/mkelfImage/configure.ac (rev 0) +++ trunk/util/mkelfImage/configure.ac 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,212 @@ +dnl +dnl configure.ac for mkelfImage +dnl +dnl + +dnl ---Required +AC_INIT(Makefile.conf.in) +AC_CONFIG_AUX_DIR(./config) + +dnl --Options + + +dnl -- Compilation platform configuration +AC_CANONICAL_HOST +#AC_CANONICAL_TARGET + + +dnl Compute target cpu +case $host_cpu in + i?86 ) + target_cpu="i386" + ;; + * ) + target_cpu="$host_cpu" + ;; +esac + +dnl ---Options +targets="" + +AC_ARG_WITH([i386], AC_HELP_STRING([--with-i386],[enable building i386 code]), + [ if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi], + [ with_i386="no"]) + +AC_ARG_WITH([ia64], AC_HELP_STRING([--with-ia64],[enable building ia64 code]), + [ if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi], + [ with_ia64="no"]) + +dnl If no targets are specified use a default +with_default="no" +if test "$with_i386" = "no" && + test "$with_ia64" = "no" ; then + with_default=`echo $target_cpu | tr [a-z] [A-Z]` +fi + +AC_MSG_NOTICE([with_default=$with_default]) +AC_MSG_NOTICE([with_i386=$with_i386]) +AC_MSG_NOTICE([with_ia64=$with_ia64]) + +dnl ---Programs +dnl To specify a different compiler, just 'export CC=/path/to/compiler' + +AC_PROG_CC + + +AC_CHECK_PROG([MKDIR], mkdir, mkdir, [], [$PATH]) +AC_CHECK_PROG([RM], rm, rm, [], [$PATH]) +AC_CHECK_PROG([CP], cp, cp, [], [$PATH]) +AC_CHECK_PROG([LN], ln, ln, [], [$PATH]) +AC_CHECK_PROG([TAR], tar, tar, [], [$PATH]) +AC_CHECK_PROG([RPM], rpm, rpm, [], [$PATH]) +AC_CHECK_PROG([SED], sed, sed, [], [$PATH]) +AC_CHECK_PROG([FIND], find, find, [], [$PATH]) + +AC_CHECK_HEADER(zlib.h, AC_CHECK_LIB(z, inflateInit_, [AC_DEFINE(HAVE_ZLIB_H, 1) LIBS="$LIBS -lz"])) + +dnl Find the default programs +if test "with_default" != no ; then + if test "$CC" = no; then + AC_MSG_ERROR([cc not found]) + fi + eval "${with_default}_CC='$CC'" + AC_PROG_CPP + if test "$CPP" = no; then + AC_MSG_ERROR([cpp not found]) + fi + eval "${with_default}_CPP='$CPP'" + AC_CHECK_TOOL([LD], ld, no) + if test "$LD" = no; then + AC_MSG_ERROR([ld not found]) + fi + eval "${with_default}_LD='$LD'" + AC_CHECK_TOOL([AS], as, no) + if test "$AS" = no; then + AC_MSG_ERROR([as not found]) + fi + eval "${with_default}_AS='$AS'" + AC_CHECK_TOOL([OBJCOPY], objcopy, no) + if test "$OBJCOPY" = no; then + AC_MSG_ERROR([objcopy not found]) + fi + eval "${with_default}_OBJCOPY='$OBJCOPY'" + if test "$with_default" = "X86_64" ; then + with_i386=yes + fi +fi + +dnl Find the programs for compiling i386 targets +if test "$with_i386" != "no" ; then + cc="gcc -m32" + cpp=cpp + ld=ld + as="as -32" + objcopy=objcopy + if test "$with_i386" != "" -a "$with_i386" != "yes" ; then + cc="$with_i386-$cc" + cpp="$with_i386-$cpp" + ld="$with_i386-$ld" + as="$with_i386-$as" + objcopy="$with_i386-$objcopy" + fi + AC_CHECK_PROG([I386_CC], [$cc], [$cc], [""], [$PATH]) + if test "$I386_CC" = no; then + + AC_MSG_ERROR([$cc not found]) + fi + AC_CHECK_PROG([I386_CPP], [$cpp], [$cpp], [""], [$PATH]) + if test "$I386_CPP" = no; then + AC_MSG_ERROR([$cpp not found]) + fi + AC_CHECK_PROG([I386_LD], [$ld], [$ld], [""], [$PATH]) + if test "$I386_AS" = no; then + AC_MSG_ERROR([$ld not found]) + fi + AC_CHECK_PROG([I386_AS], [$as], [$as], [""], [$PATH]) + if test "$I386_AS" = no; then + AC_MSG_ERROR([$as not found]) + fi + AC_CHECK_PROG([I386_OBJCOPY], [$objcopy], [$objcopy],[""], [$PATH]) + if test "$I386_OBJCOPY" = no; then + AC_MSG_ERROR([$objcopy not found]) + fi +fi + +dnl Find the programs for compiling ia64 targets +if test "$with_ia64" != "no" ; then + cc=gcc + cpp=cpp + ld=ld + as=as + objcopy=objcopy + if test "$with_ia64" != "" -a "$with_ia64" != "yes" ; then + cc="$with_ia64-$cc" + cpp="$with_ia64-$cpp" + ld="$with_ia64-$ld" + as="$with_ia64-$as" + objcopy="$with_ia64-$objcopy" + fi + AC_CHECK_PROG([IA64_CC], [$cc], [$cc], [""], [$PATH]) + if test "$IA64_CC" = no; then + + AC_MSG_ERROR([$cc not found]) + fi + AC_CHECK_PROG([IA64_CPP], [$cpp], [$cpp], [""], [$PATH]) + if test "$IA64_CPP" = no; then + AC_MSG_ERROR([$cpp not found]) + fi + AC_CHECK_PROG([IA64_LD], [$ld], [$ld], [""], [$PATH]) + if test "$IA64_AS" = no; then + AC_MSG_ERROR([$ld not found]) + fi + AC_CHECK_PROG([IA64_AS], [$as], [$as], [""], [$PATH]) + if test "$IA64_AS" = no; then + AC_MSG_ERROR([$as not found]) + fi + AC_CHECK_PROG([IA64_OBJCOPY], [$objcopy], [$objcopy],[""], [$PATH]) + if test "$IA64_OBJCOPY" = no; then + AC_MSG_ERROR([$objcopy not found]) + fi +fi + + +dnl ---Output variables... + +HOST_CC=$CC +HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)' + +dnl TODO: figure out how to set these appropriately for compilers other than gcc +I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)' +I386_ASFLAGS='' +I386_LDFLAGS='-static --warn-multiple-gp --warn-common' + +dnl TODO: figure out how to set these appropriately for compilers other than gcc +IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)' +IA64_ASFLAGS='-mconstant-gp -mauto-pic' +IA64_LDFLAGS='-static --warn-multiple-gp --warn-common' + +AC_SUBST([HOST_CC]) +AC_SUBST([HOST_CFLAGS]) + +AC_SUBST([I386_CC]) +AC_SUBST([I386_LD]) +AC_SUBST([I386_AS]) +AC_SUBST([I386_CPP]) +AC_SUBST([I386_OBJCOPY]) +AC_SUBST([I386_CFLAGS]) +AC_SUBST([I386_ASFLAGS]) +AC_SUBST([I386_LDFLAGS]) + +AC_SUBST([IA64_CC]) +AC_SUBST([IA64_LD]) +AC_SUBST([IA64_AS]) +AC_SUBST([IA64_CPP]) +AC_SUBST([IA64_OBJCOPY]) +AC_SUBST([IA64_CFLAGS]) +AC_SUBST([IA64_ASFLAGS]) +AC_SUBST([IA64_LDFLAGS]) + +dnl ---Output +AC_OUTPUT([Makefile.conf]) + + Added: trunk/util/mkelfImage/include/elf.h =================================================================== --- trunk/util/mkelfImage/include/elf.h (rev 0) +++ trunk/util/mkelfImage/include/elf.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,226 @@ +#ifndef ELF_H +#define ELF_H + +#define EI_NIDENT 16 /* Size of e_ident array. */ + +/* Values for e_type. */ +#define ET_NONE 0 /* No file type */ +#define ET_REL 1 /* Relocatable file */ +#define ET_EXEC 2 /* Executable file */ +#define ET_DYN 3 /* Shared object file */ +#define ET_CORE 4 /* Core file */ + +/* Values for e_machine (architecute). */ +#define EM_NONE 0 /* No machine */ +#define EM_M32 1 /* AT&T WE 32100 */ +#define EM_SPARC 2 /* SUN SPARC */ +#define EM_386 3 /* Intel 80386+ */ +#define EM_68K 4 /* Motorola m68k family */ +#define EM_88K 5 /* Motorola m88k family */ +#define EM_486 6 /* Perhaps disused */ +#define EM_860 7 /* Intel 80860 */ +#define EM_MIPS 8 /* MIPS R3000 big-endian */ +#define EM_S370 9 /* IBM System/370 */ +#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ + +#define EM_PARISC 15 /* HPPA */ +#define EM_VPP500 17 /* Fujitsu VPP500 */ +#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ +#define EM_960 19 /* Intel 80960 */ +#define EM_PPC 20 /* PowerPC */ +#define EM_PPC64 21 /* PowerPC 64-bit */ +#define EM_S390 22 /* IBM S390 */ + +#define EM_V800 36 /* NEC V800 series */ +#define EM_FR20 37 /* Fujitsu FR20 */ +#define EM_RH32 38 /* TRW RH-32 */ +#define EM_RCE 39 /* Motorola RCE */ +#define EM_ARM 40 /* ARM */ +#define EM_FAKE_ALPHA 41 /* Digital Alpha */ +#define EM_SH 42 /* Hitachi SH */ +#define EM_SPARCV9 43 /* SPARC v9 64-bit */ +#define EM_TRICORE 44 /* Siemens Tricore */ +#define EM_ARC 45 /* Argonaut RISC Core */ +#define EM_H8_300 46 /* Hitachi H8/300 */ +#define EM_H8_300H 47 /* Hitachi H8/300H */ +#define EM_H8S 48 /* Hitachi H8S */ +#define EM_H8_500 49 /* Hitachi H8/500 */ +#define EM_IA_64 50 /* Intel Merced */ +#define EM_MIPS_X 51 /* Stanford MIPS-X */ +#define EM_COLDFIRE 52 /* Motorola Coldfire */ +#define EM_68HC12 53 /* Motorola M68HC12 */ +#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/ +#define EM_PCP 55 /* Siemens PCP */ +#define EM_NCPU 56 /* Sony nCPU embeeded RISC */ +#define EM_NDR1 57 /* Denso NDR1 microprocessor */ +#define EM_STARCORE 58 /* Motorola Start*Core processor */ +#define EM_ME16 59 /* Toyota ME16 processor */ +#define EM_ST100 60 /* STMicroelectronic ST100 processor */ +#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ +#define EM_X86_64 62 /* AMD x86-64 architecture */ +#define EM_PDSP 63 /* Sony DSP Processor */ + +#define EM_FX66 66 /* Siemens FX66 microcontroller */ +#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ +#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ +#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ +#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ +#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ +#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */ +#define EM_SVX 73 /* Silicon Graphics SVx */ +#define EM_AT19 74 /* STMicroelectronics ST19 8 bit mc */ +#define EM_VAX 75 /* Digital VAX */ +#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ +#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */ +#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */ +#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */ +#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */ +#define EM_HUANY 81 /* Harvard University machine-independent object files */ +#define EM_PRISM 82 /* SiTera Prism */ +#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */ +#define EM_FR30 84 /* Fujitsu FR30 */ +#define EM_D10V 85 /* Mitsubishi D10V */ +#define EM_D30V 86 /* Mitsubishi D30V */ +#define EM_V850 87 /* NEC v850 */ +#define EM_M32R 88 /* Mitsubishi M32R */ +#define EM_MN10300 89 /* Matsushita MN10300 */ +#define EM_MN10200 90 /* Matsushita MN10200 */ +#define EM_PJ 91 /* picoJava */ +#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ +#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */ +#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ +#define EM_NUM 95 + +/* Values for p_type. */ +#define PT_NULL 0 /* Unused entry. */ +#define PT_LOAD 1 /* Loadable segment. */ +#define PT_DYNAMIC 2 /* Dynamic linking information segment. */ +#define PT_INTERP 3 /* Pathname of interpreter. */ +#define PT_NOTE 4 /* Auxiliary information. */ +#define PT_SHLIB 5 /* Reserved (not used). */ +#define PT_PHDR 6 /* Location of program header itself. */ + +/* Values for p_flags. */ +#define PF_X 0x1 /* Executable. */ +#define PF_W 0x2 /* Writable. */ +#define PF_R 0x4 /* Readable. */ + + +#define ELF_PROGRAM_RETURNS_BIT 0x8000000 /* e_flags bit 31 */ + +#define EI_MAG0 0 +#define ELFMAG0 0x7f + +#define EI_MAG1 1 +#define ELFMAG1 'E' + +#define EI_MAG2 2 +#define ELFMAG2 'L' + +#define EI_MAG3 3 +#define ELFMAG3 'F' + +#define ELFMAG "\177ELF" + +#define EI_CLASS 4 /* File class byte index */ +#define ELFCLASSNONE 0 /* Invalid class */ +#define ELFCLASS32 1 /* 32-bit objects */ +#define ELFCLASS64 2 /* 64-bit objects */ + +#define EI_DATA 5 /* Data encodeing byte index */ +#define ELFDATANONE 0 /* Invalid data encoding */ +#define ELFDATA2LSB 1 /* 2's complement little endian */ +#define ELFDATA2MSB 2 /* 2's complement big endian */ + +#define EI_VERSION 6 /* File version byte index */ + /* Value must be EV_CURRENT */ + +#define EV_NONE 0 /* Invalid ELF Version */ +#define EV_CURRENT 1 /* Current version */ + +#define ELF32_PHDR_SIZE (8*4) /* Size of an elf program header */ + +#ifndef ASSEMBLY +/* + * ELF definitions common to all 32-bit architectures. + */ + +typedef uint32_t Elf32_Addr; +typedef uint16_t Elf32_Half; +typedef uint32_t Elf32_Off; +typedef int32_t Elf32_Sword; +typedef uint32_t Elf32_Word; +typedef uint32_t Elf32_Size; + +typedef uint64_t Elf64_Addr; +typedef uint16_t Elf64_Half; +typedef uint64_t Elf64_Off; +typedef int32_t Elf64_Sword; +typedef uint32_t Elf64_Word; +typedef uint64_t Elf64_Size; + +/* + * ELF header. + */ +typedef struct { + unsigned char e_ident[EI_NIDENT]; /* File identification. */ + Elf32_Half e_type; /* File type. */ + Elf32_Half e_machine; /* Machine architecture. */ + Elf32_Word e_version; /* ELF format version. */ + Elf32_Addr e_entry; /* Entry point. */ + Elf32_Off e_phoff; /* Program header file offset. */ + Elf32_Off e_shoff; /* Section header file offset. */ + Elf32_Word e_flags; /* Architecture-specific flags. */ + Elf32_Half e_ehsize; /* Size of ELF header in bytes. */ + Elf32_Half e_phentsize; /* Size of program header entry. */ + Elf32_Half e_phnum; /* Number of program header entries. */ + Elf32_Half e_shentsize; /* Size of section header entry. */ + Elf32_Half e_shnum; /* Number of section header entries. */ + Elf32_Half e_shstrndx; /* Section name strings section. */ +} Elf32_Ehdr; + +typedef struct { + unsigned char e_ident[EI_NIDENT]; /* File identification. */ + Elf64_Half e_type; /* File type. */ + Elf64_Half e_machine; /* Machine architecture. */ + Elf64_Word e_version; /* ELF format version. */ + Elf64_Addr e_entry; /* Entry point. */ + Elf64_Off e_phoff; /* Program header file offset. */ + Elf64_Off e_shoff; /* Section header file offset. */ + Elf64_Word e_flags; /* Architecture-specific flags. */ + Elf64_Half e_ehsize; /* Size of ELF header in bytes. */ + Elf64_Half e_phentsize; /* Size of program header entry. */ + Elf64_Half e_phnum; /* Number of program header entries. */ + Elf64_Half e_shentsize; /* Size of section header entry. */ + Elf64_Half e_shnum; /* Number of section header entries. */ + Elf64_Half e_shstrndx; /* Section name strings section. */ +} Elf64_Ehdr; + +/* + * Program header. + */ +typedef struct { + Elf32_Word p_type; /* Entry type. */ + Elf32_Off p_offset; /* File offset of contents. */ + Elf32_Addr p_vaddr; /* Virtual address (not used). */ + Elf32_Addr p_paddr; /* Physical address. */ + Elf32_Size p_filesz; /* Size of contents in file. */ + Elf32_Size p_memsz; /* Size of contents in memory. */ + Elf32_Word p_flags; /* Access permission flags. */ + Elf32_Size p_align; /* Alignment in memory and file. */ +} Elf32_Phdr; + +typedef struct { + Elf64_Word p_type; /* Entry type. */ + Elf64_Word p_flags; /* Access permission flags. */ + Elf64_Off p_offset; /* File offset of contents. */ + Elf64_Addr p_vaddr; /* Virtual address (not used). */ + Elf64_Addr p_paddr; /* Physical address. */ + Elf64_Size p_filesz; /* Size of contents in file. */ + Elf64_Size p_memsz; /* Size of contents in memory. */ + Elf64_Size p_align; /* Alignment in memory and file. */ +} Elf64_Phdr; + +#endif /* ASSEMBLY */ + +#endif /* ELF_H */ Added: trunk/util/mkelfImage/include/elf_boot.h =================================================================== --- trunk/util/mkelfImage/include/elf_boot.h (rev 0) +++ trunk/util/mkelfImage/include/elf_boot.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,105 @@ +#ifndef ELF_BOOT_H +#define ELF_BOOT_H + + +/* This defines the structure of a table of parameters useful for ELF + * bootable images. These parameters are all passed and generated + * by the bootloader to the booted image. For simplicity and + * consistency the Elf Note format is reused. + * + * All of the information must be Position Independent Data. + * That is it must be safe to relocate the whole ELF boot parameter + * block without changing the meaning or correctnes of the data. + * Additionally it must be safe to permute the order of the ELF notes + * to any possible permutation without changing the meaning or correctness + * of the data. + * + */ + +#define ELF_BHDR_MAGIC 0x0E1FB007 + +#ifndef ASSEMBLY +#include <stdint.h> +typedef uint16_t Elf_Half; +typedef uint32_t Elf_Word; + +/* + * Elf boot notes... + */ + +typedef struct Elf_Bhdr +{ + Elf_Word b_signature; /* "0x0E1FB007" */ + Elf_Word b_size; + Elf_Half b_checksum; + Elf_Half b_records; +} Elf_Bhdr; + +/* + * ELF Notes. + */ + +typedef struct Elf_Nhdr +{ + Elf_Word n_namesz; /* Length of the note's name. */ + Elf_Word n_descsz; /* Length of the note's descriptor. */ + Elf_Word n_type; /* Type of the note. */ +} Elf_Nhdr; + +#endif /* ASSEMBLY */ + +/* Standardized Elf image notes for booting... The name for all of these is ELFBoot */ +#define ELF_NOTE_BOOT "ELFBoot" + +#define EIN_PROGRAM_NAME 0x00000001 +/* The program in this ELF file */ +#define EIN_PROGRAM_VERSION 0x00000002 +/* The version of the program in this ELF file */ +#define EIN_PROGRAM_CHECKSUM 0x00000003 +/* ip style checksum of the memory image. */ + + +/* Linux image notes for booting... The name for all of these is Linux */ + +#define LIN_COMMAND_LINE 0x00000001 +/* The command line to pass to the loaded kernel. */ +#define LIN_ROOT_DEV 0x00000002 +/* The root dev to pass to the loaded kernel. */ +#define LIN_RAMDISK_FLAGS 0x00000003 +/* Various old ramdisk flags */ +#define LIN_INITRD_START 0x00000004 +/* Start of the ramdisk in bytes */ +#define LIN_INITRD_SIZE 0x00000005 +/* Size of the ramdisk in bytes */ + +/* Notes that are passed to a loaded image */ +/* For the standard elf boot notes n_namesz must be zero */ +#define EBN_FIRMWARE_TYPE 0x00000001 +/* ASCIZ name of the platform firmware. */ +#define EBN_BOOTLOADER_NAME 0x00000002 +/* This specifies just the ASCIZ name of the bootloader */ +#define EBN_BOOTLOADER_VERSION 0x00000003 +/* This specifies the version of the bootloader as an ASCIZ string */ +#define EBN_COMMAND_LINE 0x00000004 +/* This specifies a command line that can be set by user interaction, + * and is provided as a free form ASCIZ string to the loaded image. + */ +#define EBN_NOP 0x00000005 +/* A note nop note has no meaning, useful for inserting explicit padding */ +#define EBN_LOADED_IMAGE 0x00000006 +/* An ASCIZ string naming the loaded image */ + + +/* Etherboot specific notes */ +#define EB_PARAM_NOTE "Etherboot" +#define EB_IA64_SYSTAB 0x00000001 +#define EB_IA64_MEMMAP 0x00000002 +#define EB_IA64_FPSWA 0x00000003 +#define EB_IA64_CONINFO 0x00000004 +#define EB_BOOTP_DATA 0x00000005 +#define EB_HEADER 0x00000006 +#define EB_IA64_IMAGE_HANDLE 0x00000007 +#define EB_I386_MEMMAP 0x00000008 + + +#endif /* ELF_BOOT_H */ Added: trunk/util/mkelfImage/include/linuxbios_tables.h =================================================================== --- trunk/util/mkelfImage/include/linuxbios_tables.h (rev 0) +++ trunk/util/mkelfImage/include/linuxbios_tables.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,82 @@ +#ifndef LINUXBIOS_TABLES_H +#define LINUXBIOS_TABLES_H + +#include <stdint.h> + +/* The linuxbios table information is for conveying information + * from the firmware to the loaded OS image. Primarily this + * is expected to be information that cannot be discovered by + * other means, such as quering the hardware directly. + * + * All of the information should be Position Independent Data. + * That is it should be safe to relocated any of the information + * without it's meaning/correctnes changing. For table that + * can reasonably be used on multiple architectures the data + * size should be fixed. This should ease the transition between + * 32 bit and 64 bit architectures etc. + * + * The completeness test for the information in this table is: + * - Can all of the hardware be detected? + * - Are the per motherboard constants available? + * - Is there enough to allow a kernel to run that was written before + * a particular motherboard is constructed? (Assuming the kernel + * has drivers for all of the hardware but it does not have + * assumptions on how the hardware is connected together). + * + * With this test it should be straight forward to determine if a + * table entry is required or not. This should remove much of the + * long term compatibility burden as table entries which are + * irrelevant or have been replaced by better alternatives may be + * dropped. Of course it is polite and expidite to include extra + * table entries and be backwards compatible, but it is not required. + */ + + +struct lb_header +{ + uint8_t signature[4]; /* LBIO */ + uint32_t header_bytes; + uint32_t header_checksum; + uint32_t table_bytes; + uint32_t table_checksum; + uint32_t table_entries; +}; + +/* Every entry in the boot enviroment list will correspond to a boot + * info record. Encoding both type and size. The type is obviously + * so you can tell what it is. The size allows you to skip that + * boot enviroment record if you don't know what it easy. This allows + * forward compatibility with records not yet defined. + */ +struct lb_record { + uint32_t tag; /* tag ID */ + uint32_t size; /* size of record (in bytes) */ +}; + +#define LB_TAG_UNUSED 0x0000 + +#define LB_TAG_MEMORY 0x0001 + +struct lb_memory_range { + uint64_t start; + uint64_t size; + uint32_t type; +#define LB_MEM_RAM 1 +#define LB_MEM_RESERVED 2 + +}; + +struct lb_memory { + uint32_t tag; + uint32_t size; + struct lb_memory_range map[0]; +}; + +#define LB_TAG_HWRPB 0x0002 +struct lb_hwrpb { + uint32_t tag; + uint32_t size; + uint64_t hwrpb; +}; + +#endif /* LINUXBIOS_TABLES_H */ Added: trunk/util/mkelfImage/include/mkelfImage.h =================================================================== --- trunk/util/mkelfImage/include/mkelfImage.h (rev 0) +++ trunk/util/mkelfImage/include/mkelfImage.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,125 @@ +#ifndef MKELFIMAGE_H +#define MKELFIMAGE_H + +#include <sys/types.h> +#include <stdint.h> +#include <byteswap.h> +#define USE_BSD +#include <endian.h> +#define _GNU_SOURCE + +struct memelfheader; +struct memelfphdr; +struct memelfnote; + +extern void die(char *fmt, ...); +extern void usage(void); +extern void error(char *fmt, ...); +extern uint16_t ipchksum(const void *data, unsigned long length); +extern uint16_t add_ipchksums(unsigned long offset, uint16_t sum, uint16_t new); +extern void *xmalloc(size_t size, const char *name); +extern void *xrealloc(void *ptr, size_t size, const char *name); +extern char *slurp_file(const char *filename, off_t *r_size); +extern char *slurp_decompress_file(const char *filename, off_t *r_size); +extern struct memelfphdr *add_program_headers(struct memelfheader *ehdr, int count); +extern struct memelfnote *add_notes(struct memelfheader *ehdr, int count); + +typedef char *(probe_t)(char *kernel_buf, off_t kernel_size); +typedef int (mkelf_t)(int argc, char **argv, + struct memelfheader *hdr, char *kernel_buf, off_t kernel_size); +typedef void (usage_t)(void); +struct file_type { + const char *name; + probe_t *probe; + mkelf_t *mkelf; + usage_t *usage; +}; + +#if BYTE_ORDER == LITTLE_ENDIAN +#define cpu_to_le16(val) (val) +#define cpu_to_le32(val) (val) +#define cpu_to_le64(val) (val) +#define cpu_to_be16(val) bswap_16(val) +#define cpu_to_be32(val) bswap_32(val) +#define cpu_to_be64(val) bswap_64(val) +#define le16_to_cpu(val) (val) +#define le32_to_cpu(val) (val) +#define le64_to_cpu(val) (val) +#define be16_to_cpu(val) bswap_16(val) +#define be32_to_cpu(val) bswap_32(val) +#define be64_to_cpu(val) bswap_64(val) +#endif +#if BYTE_ORDER == BIG_ENDIAN +#define cpu_to_le16(val) bswap_16(val) +#define cpu_to_le32(val) bswap_32(val) +#define cpu_to_le64(val) bswap_64(val) +#define cpu_to_be16(val) (val) +#define cpu_to_be32(val) (val) +#define cpu_to_be64(val) (val) +#define le16_to_cpu(val) bswap_16(val) +#define le32_to_cpu(val) bswap_32(val) +#define le64_to_cpu(val) bswap_64(val) +#define be16_to_cpu(val) (val) +#define be32_to_cpu(val) (val) +#define be64_to_cpu(val) (val) +#endif + +#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) + +struct memelfheader { + unsigned ei_class; + unsigned ei_data; + unsigned e_type; + unsigned e_machine; + unsigned e_flags; + unsigned e_phnum; + unsigned e_notenum; + unsigned long e_entry; + struct memelfphdr *e_phdr; + struct memelfnote *e_notes; +}; + +struct memelfphdr { + uint64_t p_vaddr; + uint64_t p_paddr; + uint64_t p_filesz; + uint64_t p_memsz; + void *p_data; + unsigned p_type; + unsigned p_flags; +}; + +struct memelfnote { + unsigned n_type; + char *n_name; + void *n_desc; + unsigned n_descsz; +}; + +#define OPT_HELP 'h' +#define OPT_VERSION 'v' +#define OPT_TYPE 't' +#define OPT_KERNEL 256 +#define OPT_OUTPUT 257 +#define OPT_MAX 258 + +#define MKELF_OPTIONS \ + { "help", 0, 0, OPT_HELP }, \ + { "version", 0, 0, OPT_VERSION }, \ + { "kernel", 1, 0, OPT_KERNEL }, \ + { "output", 1, 0, OPT_OUTPUT }, \ + { "type", 1, 0, OPT_TYPE }, + +#define MKELF_OPT_STR "hvt:" + +extern probe_t vmlinux_i386_probe; +extern probe_t bzImage_i386_probe; +extern probe_t linux_i386_probe; +extern mkelf_t linux_i386_mkelf; +extern usage_t linux_i386_usage; + +extern probe_t linux_ia64_probe; +extern mkelf_t linux_ia64_mkelf; +extern usage_t linux_ia64_usage; + +#endif /* MKELFIMAGE_H */ Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stddef.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,15 @@ +#ifndef ALPHA_STDDEF_H +#define ALPHA_STDDEF_H + +typedef long ptrdiff_t; +typedef unsigned long size_t; +typedef long ssize_t; + +typedef int wchar_t; +typedef unsigned int wint_t; + +#define NULL 0 + +#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) + +#endif /* ALPHA_STDDEF_H */ Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/include/stdint.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,53 @@ +#ifndef ALPHA_STDINT_H +#define ALPHA_STDINT_H + +/* Exact integral types */ +typedef unsigned char uint8_t; +typedef signed char int8_t; + +typedef unsigned short uint16_t; +typedef signed short int16_t; + +typedef unsigned int uint32_t; +typedef signed int int32_t; + +typedef unsigned long uint64_t; +typedef signed long int64_t; + + +/* Small types */ +typedef unsigned char uint_least8_t; +typedef signed char int_least8_t; + +typedef unsigned short uint_least16_t; +typedef signed short int_least16_t; + +typedef unsigned int uint_least32_t; +typedef signed int int_least32_t; + +typedef unsigned long uint_least64_t; +typedef signed long int_least64_t; + +/* Fast Types */ +typedef unsigned char uint_fast8_t; +typedef signed char int_fast8_t; + +typedef unsigned long uint_fast16_t; +typedef signed long int_fast16_t; + +typedef unsigned long uint_fast32_t; +typedef signed long int_fast32_t; + +typedef unsigned long uint_fast64_t; +typedef signed long int_fast64_t; + +/* Types for `void *' pointers. */ +typedef long intptr_t; +typedef unsigned long uintptr_t; + +/* Largest integral types */ +typedef long intmax_t; +typedef unsigned long uintmax_t; + + +#endif /* ALPHA_STDINT_H */ Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/include/va-alpha.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,128 @@ +/* GNU C varargs and stdargs support for the DEC Alpha. */ + +/* Note: We must use the name __builtin_savregs. GCC attaches special + significance to that name. In particular, regardless of where in a + function __builtin_saveregs is called, GCC moves the call up to the + very start of the function. */ + +/* Define __gnuc_va_list. */ + +#ifndef __GNUC_VA_LIST +#define __GNUC_VA_LIST + +/* In VMS, __gnuc_va_list is simply char *; on OSF, it's a structure. */ + +#ifdef __VMS__ +typedef char *__gnuc_va_list; +#else + +typedef struct { + char *__base; /* Pointer to first integer register. */ + int __offset; /* Byte offset of args so far. */ +} __gnuc_va_list; +#endif + +#endif /* __GNUC_VA_LIST */ + +/* If this is for internal libc use, don't define anything but + __gnuc_va_list. */ + +#if !defined(__GNUC_VA_LIST_1) && (defined (_STDARG_H) || defined (_VARARGS_H)) +#define __GNUC_VA_LIST_1 + +#define _VA_LIST +#define _VA_LIST_ + +typedef __gnuc_va_list va_list; + +#if !defined(_STDARG_H) + +/* varargs support */ +#define va_alist __builtin_va_alist +#define va_dcl int __builtin_va_alist;... +#ifdef __VMS__ +#define va_start(pvar) ((pvar) = __builtin_saveregs ()) +#else +#define va_start(pvar) ((pvar) = * (__gnuc_va_list *) __builtin_saveregs ()) +#endif + +#else /* STDARG.H */ + +/* ANSI alternative. */ + +/* Call __builtin_next_arg even though we aren't using its value, so that + we can verify that firstarg is correct. */ + +#ifdef __VMS__ +#define va_start(pvar, firstarg) \ + (__builtin_next_arg (firstarg), \ + (pvar) = __builtin_saveregs ()) +#else +#define va_start(pvar, firstarg) \ + (__builtin_next_arg (firstarg), \ + (pvar) = *(__gnuc_va_list *) __builtin_saveregs ()) +#endif + +#endif /* _STDARG_H */ + +#define va_end(__va) ((void) 0) + +/* Values returned by __builtin_classify_type. */ + +enum { + __no_type_class = -1, + __void_type_class, + __integer_type_class, + __char_type_class, + __enumeral_type_class, + __boolean_type_class, + __pointer_type_class, + __reference_type_class, + __offset_type_class, + __real_type_class, + __complex_type_class, + __function_type_class, + __method_type_class, + __record_type_class, + __union_type_class, + __array_type_class, + __string_type_class, + __set_type_class, + __file_type_class, + __lang_type_class +}; + +/* Note that parameters are always aligned at least to a word boundary + (when passed) regardless of what GCC's __alignof__ operator says. */ + +/* Avoid errors if compiling GCC v2 with GCC v1. */ +#if __GNUC__ == 1 +#define __extension__ +#endif + +/* Get the size of a type in bytes, rounded up to an integral number + of words. */ + +#define __va_tsize(__type) \ + (((sizeof (__type) + __extension__ sizeof (long long) - 1) \ + / __extension__ sizeof (long long)) * __extension__ sizeof (long long)) + +#ifdef __VMS__ +#define va_arg(__va, __type) \ +(*(((__va) += __va_tsize (__type)), \ + (__type *)(void *)((__va) - __va_tsize (__type)))) + +#else + +#define va_arg(__va, __type) \ +(*(((__va).__offset += __va_tsize (__type)), \ + (__type *)(void *)((__va).__base + (__va).__offset \ + - (((__builtin_classify_type (* (__type *) 0) \ + == __real_type_class) && (__va).__offset <= (6 * 8)) \ + ? (6 * 8) + 8 : __va_tsize (__type))))) +#endif + +/* Copy __gnuc_va_list into another variable of this type. */ +#define __va_copy(dest, src) (dest) = (src) + +#endif /* __GNUC_VA_LIST_1 */ Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,17 @@ +ARCH_OPTIONS= + +OBJECTS += __divqu.o __remqu.o __divlu.o __remlu.o + +$(OBJDIR)/__divqu.o: $(SRC)/arch/alpha/lib/divide.S + $(CC) $(CFLAGS) -DDIV -c -o $@ $^ + +$(OBJDIR)/__remqu.o: $(SRC)/arch/alpha/lib/divide.S + $(CC) $(CFLAGS) -DREM -c -o $@ $^ + +$(OBJDIR)/__divlu.o: $(SRC)/arch/alpha/lib/divide.S + $(CC) $(CFLAGS) -DDIV -DINTSIZE -c -o $@ $^ + +$(OBJDIR)/__remlu.o: $(SRC)/arch/alpha/lib/divide.S + $(CC) $(CFLAGS) -DREM -DINTSIZE -c -o $@ $^ + + Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/divide.S 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,195 @@ +/* + * cpu/ev6/divide.S + * + * (C) 1995 Linus Torvalds + * + * Alpha division.. + */ + +/* + * The alpha chip doesn't provide hardware division, so we have to do it + * by hand. The compiler expects the functions + * + * __divqu: 64-bit unsigned long divide + * __remqu: 64-bit unsigned long remainder + * __divqs/__remqs: signed 64-bit + * __divlu/__remlu: unsigned 32-bit + * __divls/__remls: signed 32-bit + * + * These are not normal C functions: instead of the normal + * calling sequence, these expect their arguments in registers + * $24 and $25, and return the result in $27. Register $28 may + * be clobbered (assembly temporary), anything else must be saved. + * + * In short: painful. + * + * This is a rather simple bit-at-a-time algorithm: it's very good + * at dividing random 64-bit numbers, but the more usual case where + * the divisor is small is handled better by the DEC algorithm + * using lookup tables. This uses much less memory, though, and is + * nicer on the cache.. Besides, I don't know the copyright status + * of the DEC code. + */ + +/* + * My temporaries: + * $0 - current bit + * $1 - shifted divisor + * $2 - modulus/quotient + * + * $23 - return address + * $24 - dividend + * $25 - divisor + * + * $27 - quotient/modulus + * $28 - compare status + */ + +#define halt .long 0 + +/* + * Select function type and registers + */ +#define mask $0 +#define divisor $1 +#define compare $28 +#define tmp1 $3 +#define tmp2 $4 + +#ifdef DIV +#define DIV_ONLY(x,y...) x,##y +#define MOD_ONLY(x,y...) +#define func(x) __div##x +#define modulus $2 +#define quotient $27 +#define GETSIGN(x) xor $24,$25,x +#define STACK 48 +#else +#define DIV_ONLY(x,y...) +#define MOD_ONLY(x,y...) x,##y +#define func(x) __rem##x +#define modulus $27 +#define quotient $2 +#define GETSIGN(x) bis $24,$24,x +#define STACK 32 +#endif + +/* + * For 32-bit operations, we need to extend to 64-bit + */ +#ifdef INTSIZE +#define ufunction func(lu) +#define sfunction func(l) +#define LONGIFY(x) zapnot x,15,x +#define SLONGIFY(x) addl x,0,x +#else +#define ufunction func(qu) +#define sfunction func(q) +#define LONGIFY(x) +#define SLONGIFY(x) +#endif + +.set noat +.align 3 +.globl ufunction +.ent ufunction +ufunction: + subq $30,STACK,$30 + .frame $30,STACK,$23 + .prologue 0 + +7: stq $1, 0($30) + bis $25,$25,divisor + stq $2, 8($30) + bis $24,$24,modulus + stq $0,16($30) + bis $31,$31,quotient + LONGIFY(divisor) + stq tmp1,24($30) + LONGIFY(modulus) + bis $31,1,mask + DIV_ONLY(stq tmp2,32($30)) + beq divisor, 9f /* div by zero */ + +#ifdef INTSIZE + /* + * shift divisor left, using 3-bit shifts for + * 32-bit divides as we can't overflow. Three-bit + * shifts will result in looping three times less + * here, but can result in two loops more later. + * Thus using a large shift isn't worth it (and + * s8add pairs better than a sll..) + */ +1: cmpult divisor,modulus,compare + s8addq divisor,$31,divisor + s8addq mask,$31,mask + bne compare,1b +#else +1: cmpult divisor,modulus,compare + blt divisor, 2f + addq divisor,divisor,divisor + addq mask,mask,mask + bne compare,1b + unop +#endif + + /* ok, start to go right again.. */ +2: DIV_ONLY(addq quotient,mask,tmp2) + srl mask,1,mask + cmpule divisor,modulus,compare + subq modulus,divisor,tmp1 + DIV_ONLY(cmovne compare,tmp2,quotient) + srl divisor,1,divisor + cmovne compare,tmp1,modulus + bne mask,2b + +9: ldq $1, 0($30) + ldq $2, 8($30) + ldq $0,16($30) + ldq tmp1,24($30) + DIV_ONLY(ldq tmp2,32($30)) + addq $30,STACK,$30 + ret $31,($23),1 + .end ufunction + +/* + * Uhh.. Ugly signed division. I'd rather not have it at all, but + * it's needed in some circumstances. There are different ways to + * handle this, really. This does: + * -a / b = a / -b = -(a / b) + * -a % b = -(a % b) + * a % -b = a % b + * which is probably not the best solution, but at least should + * have the property that (x/y)*y + (x%y) = x. + */ +.align 3 +.globl sfunction +.ent sfunction +sfunction: + subq $30,STACK,$30 + .frame $30,STACK,$23 + .prologue 0 + bis $24,$25,$28 + SLONGIFY($28) + bge $28,7b + stq $24,0($30) + subq $31,$24,$28 + stq $25,8($30) + cmovlt $24,$28,$24 /* abs($24) */ + stq $23,16($30) + subq $31,$25,$28 + stq tmp1,24($30) + cmovlt $25,$28,$25 /* abs($25) */ + unop + bsr $23,ufunction + ldq $24,0($30) + ldq $25,8($30) + GETSIGN($28) + subq $31,$27,tmp1 + SLONGIFY($28) + ldq $23,16($30) + cmovlt $28,tmp1,$27 + ldq tmp1,24($30) + addq $30,STACK,$30 + ret $31,($23),1 + .end sfunction Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/kunzip.lds 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,50 @@ +PAGE_SIZE = 65536; +BASIC_ALIGN = 8; +OUTPUT_FORMAT("elf64-alpha") +ENTRY(__start) +SECTIONS +{ + . = PAGE_SIZE; + _start = .; + /* + * First we place the code and read only data (typically const declared). + * This get placed in rom. + */ + .text : { + _text = .; + *(.text) + _etext = .; + _rodata = .; + *(.rodata); + _erodata = .; + } + /* Global data */ + .data : { + _data = .; + *(.data) + CONSTRUCTORS + *(.got) + *(.sdata) + _edata = .; + } + + /* Important align _bss so bss may be zeroed with quadword access */ + . = ALIGN(BASIC_ALIGN); + .bss : { + _bss = .; + *(.sbss) + *(.scommon) + *(.bss) + *(COMMON) + *(.heap) + *(.stack) + /* Important align _ebss so bss may be zeroed with quadword access */ + . = ALIGN(BASIC_ALIGN); + _ebss = .; + } + _end = .; + + /DISCARD/ : { + *(*) + } +} Added: trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/alpha/lib/start.S 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,89 @@ +.set noat +.set noreorder +.text + +__original_registers: + .quad 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + +__entry: + .quad entry + +.globl __start +__start: + br $27, __save_registers +__save_registers: + lda $27, (__original_registers - __save_registers)($27) + stq $0, 0($27) + stq $1, 8($27) + stq $2, 16($27) + stq $3, 24($27) + stq $4, 32($27) + stq $5, 40($27) + stq $6, 48($27) + stq $7, 56($27) + stq $8, 64($27) + stq $9, 72($27) + stq $10, 80($27) + stq $11, 88($27) + stq $12, 96($27) + stq $13, 104($27) + stq $14, 112($27) + stq $15, 120($27) + stq $16, 128($27) + stq $17, 136($27) + stq $18, 144($27) + stq $19, 152($27) + stq $20, 160($27) + stq $21, 168($27) + stq $22, 176($27) + stq $23, 184($27) + stq $24, 192($27) + stq $25, 200($27) + stq $26, 208($27) + stq $28, 224($27) + stq $29, 232($27) + stq $30, 240($27) + +__normal_start: + ldgp $29, (__normal_start - __original_registers)($27) + lda $30, _estack + jsr $26, kunzip + +.globl jmp_to_program_entry +jmp_to_program_entry: + br $27, __restore_registers +__restore_registers: + lda $27,(__original_registers - __restore_registers)($27) + stq $16, (__entry - __original_registers)($27) + ldq $0, 0($27) + ldq $1, 8($27) + ldq $2, 16($27) + ldq $3, 24($27) + ldq $4, 32($27) + ldq $5, 40($27) + ldq $6, 48($27) + ldq $7, 56($27) + ldq $8, 64($27) + ldq $9, 72($27) + ldq $10, 80($27) + ldq $11, 88($27) + ldq $12, 96($27) + ldq $13, 104($27) + ldq $14, 112($27) + ldq $15, 120($27) + ldq $16, 128($27) + ldq $17, 136($27) + ldq $18, 144($27) + ldq $19, 152($27) + ldq $20, 160($27) + ldq $21, 168($27) + ldq $22, 176($27) + ldq $23, 184($27) + ldq $24, 192($27) + ldq $25, 200($27) + ldq $26, 208($27) + ldq $28, 224($27) + ldq $29, 232($27) + ldq $30, 240($27) + ldq $27, (__entry - __original_registers)($27) + jsr $31, ($27) Added: trunk/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/i386/include/stddef.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,15 @@ +#ifndef I386_STDDEF_H +#define I386_STDDEF_H + +typedef long ptrdiff_t; +typedef unsigned long size_t; +typedef long ssize_t; + +typedef int wchar_t; +typedef unsigned int wint_t; + +#define NULL 0 + +#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) + +#endif I386_STDDEF_H Added: trunk/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/i386/include/stdint.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,52 @@ +#ifndef I386_STDINT_H +#define I386_STDINT_H + +/* Exact integral types */ +typedef unsigned char uint8_t; +typedef signed char int8_t; + +typedef unsigned short uint16_t; +typedef signed short int16_t; + +typedef unsigned int uint32_t; +typedef signed int int32_t; + +typedef unsigned long long uint64_t; +typedef signed long long int64_t; + +/* Small types */ +typedef unsigned char uint_least8_t; +typedef signed char int_least8_t; + +typedef unsigned short uint_least16_t; +typedef signed short int_least16_t; + +typedef unsigned int uint_least32_t; +typedef signed int int_least32_t; + +typedef unsigned long long uint_least64_t; +typedef signed long long int_least64_t; + +/* Fast Types */ +typedef unsigned char uint_fast8_t; +typedef signed char int_fast8_t; + +typedef unsigned int uint_fast16_t; +typedef signed int int_fast16_t; + +typedef unsigned int uint_fast32_t; +typedef signed int int_fast32_t; + +typedef unsigned long long uint_fast64_t; +typedef signed long long int_fast64_t; + +/* Types for `void *' pointers. */ +typedef int intptr_t; +typedef unsigned int uintptr_t; + +/* Largest integral types */ +typedef long long int intmax_t; +typedef unsigned long long uintmax_t; + + +#endif /* I386_STDINT_H */ Added: trunk/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/i386/lib/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1 @@ +ARCH_OPTIONS= Added: trunk/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/i386/lib/kunzip.lds 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,50 @@ +PAGE_SIZE = 4096; +BASIC_ALIGN = 8; +OUTPUT_FORMAT("elf32-i386") +ENTRY(__start) +SECTIONS +{ + . = PAGE_SIZE; + _start = .; + /* + * First we place the code and read only data (typically const declared). + * This get placed in rom. + */ + .text : { + _text = .; + *(.text) + _etext = .; + _rodata = .; + *(.rodata); + _erodata = .; + } + /* Global data */ + .data : { + _data = .; + *(.data) + CONSTRUCTORS + *(.got) + *(.sdata) + _edata = .; + } + + /* Important align _bss so bss may be zeroed with quadword access */ + . = ALIGN(BASIC_ALIGN); + .bss : { + _bss = .; + *(.sbss) + *(.scommon) + *(.bss) + *(COMMON) + *(.heap) + *(.stack) + /* Important align _ebss so bss may be zeroed with quadword access */ + . = ALIGN(BASIC_ALIGN); + _ebss = .; + } + _end = .; + + /DISCARD/ : { + *(*) + } +} Added: trunk/util/mkelfImage/kunzip_src/arch/i386/lib/start.S =================================================================== --- trunk/util/mkelfImage/kunzip_src/arch/i386/lib/start.S (rev 0) +++ trunk/util/mkelfImage/kunzip_src/arch/i386/lib/start.S 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,36 @@ +.text + +__original_registers: + .long 0, 0, 0, 0, 0, 0 , 0 , 0 +__entry: + .long entry + +.globl __start +__start: + movl %eax, 0+__original_registers + movl %ebx, 4+__original_registers + movl %ecx, 8+__original_registers + movl %edx, 12+__original_registers + movl %esi, 16+__original_registers + movl %edi, 20+__original_registers + movl %esp, 24+__original_registers + movl %ebp, 28+__original_registers + +__normal_start: + movl $_estack, %esp + call kunzip + +.globl jmp_to_program_entry +jmp_to_program_entry: + movl 4(%esp), %eax + movl %eax, __entry + movl 0+__original_registers, %eax + movl 4+__original_registers, %ebx + movl 8+__original_registers, %ecx + movl 12+__original_registers, %edx + movl 16+__original_registers, %esi + movl 20+__original_registers, %edi + movl 24+__original_registers, %esp + movl 28+__original_registers, %ebp + jmp *__entry + \ No newline at end of file Added: trunk/util/mkelfImage/kunzip_src/include/stdarg.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/include/stdarg.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/include/stdarg.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,205 @@ +/* stdarg.h for GNU. + Note that the type used in va_arg is supposed to match the + actual type **after default promotions**. + Thus, va_arg (..., short) is not valid. */ + +#ifndef _STDARG_H +#ifndef _ANSI_STDARG_H_ +#ifndef __need___va_list +#define _STDARG_H +#define _ANSI_STDARG_H_ +#endif /* not __need___va_list */ +#undef __need___va_list + +#ifdef __clipper__ +#include "va-clipper.h" +#else +#ifdef __m88k__ +#include "va-m88k.h" +#else +#ifdef __i860__ +#include "va-i860.h" +#else +#ifdef __hppa__ +#include "va-pa.h" +#else +#ifdef __mips__ +#include "va-mips.h" +#else +#ifdef __sparc__ +#include "va-sparc.h" +#else +#ifdef __i960__ +#include "va-i960.h" +#else +#ifdef __alpha__ +#include "va-alpha.h" +#else +#if defined (__H8300__) || defined (__H8300H__) || defined (__H8300S__) +#include "va-h8300.h" +#else +#if defined (__PPC__) && (defined (_CALL_SYSV) || defined (_WIN32)) +#include "va-ppc.h" +#else +#ifdef __arc__ +#include "va-arc.h" +#else +#ifdef __M32R__ +#include "va-m32r.h" +#else +#ifdef __sh__ +#include "va-sh.h" +#else +#ifdef __mn10300__ +#include "va-mn10300.h" +#else +#ifdef __mn10200__ +#include "va-mn10200.h" +#else +#ifdef __v850__ +#include "va-v850.h" +#else + +/* Define __gnuc_va_list. */ + +#ifndef __GNUC_VA_LIST +#define __GNUC_VA_LIST +#if defined(__svr4__) || defined(_AIX) || defined(_M_UNIX) || defined(__NetBSD__) +typedef char *__gnuc_va_list; +#else +typedef void *__gnuc_va_list; +#endif +#endif + +/* Define the standard macros for the user, + if this invocation was from the user program. */ +#ifdef _STDARG_H + +/* Amount of space required in an argument list for an arg of type TYPE. + TYPE may alternatively be an expression whose type is used. */ + +#if defined(sysV68) +#define __va_rounded_size(TYPE) \ + (((sizeof (TYPE) + sizeof (short) - 1) / sizeof (short)) * sizeof (short)) +#else +#define __va_rounded_size(TYPE) \ + (((sizeof (TYPE) + sizeof (int) - 1) / sizeof (int)) * sizeof (int)) +#endif + +#define va_start(AP, LASTARG) \ + (AP = ((__gnuc_va_list) __builtin_next_arg (LASTARG))) + +#undef va_end +void va_end (__gnuc_va_list); /* Defined in libgcc.a */ +#define va_end(AP) ((void)0) + +/* We cast to void * and then to TYPE * because this avoids + a warning about increasing the alignment requirement. */ + +#if (defined (__arm__) && ! defined (__ARMEB__)) || defined (__i386__) || defined (__i860__) || defined (__ns32000__) || defined (__vax__) +/* This is for little-endian machines; small args are padded upward. */ +#define va_arg(AP, TYPE) \ + (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ + *((TYPE *) (void *) ((char *) (AP) - __va_rounded_size (TYPE)))) +#else /* big-endian */ +/* This is for big-endian machines; small args are padded downward. */ +#define va_arg(AP, TYPE) \ + (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ + *((TYPE *) (void *) ((char *) (AP) \ + - ((sizeof (TYPE) < __va_rounded_size (char) \ + ? sizeof (TYPE) : __va_rounded_size (TYPE)))))) +#endif /* big-endian */ + +/* Copy __gnuc_va_list into another variable of this type. */ +#define __va_copy(dest, src) (dest) = (src) + +#endif /* _STDARG_H */ + +#endif /* not v850 */ +#endif /* not mn10200 */ +#endif /* not mn10300 */ +#endif /* not sh */ +#endif /* not m32r */ +#endif /* not arc */ +#endif /* not powerpc with V.4 calling sequence */ +#endif /* not h8300 */ +#endif /* not alpha */ +#endif /* not i960 */ +#endif /* not sparc */ +#endif /* not mips */ +#endif /* not hppa */ +#endif /* not i860 */ +#endif /* not m88k */ +#endif /* not clipper */ + +#ifdef _STDARG_H +/* Define va_list, if desired, from __gnuc_va_list. */ +/* We deliberately do not define va_list when called from + stdio.h, because ANSI C says that stdio.h is not supposed to define + va_list. stdio.h needs to have access to that data type, + but must not use that name. It should use the name __gnuc_va_list, + which is safe because it is reserved for the implementation. */ + +#ifdef _HIDDEN_VA_LIST /* On OSF1, this means varargs.h is "half-loaded". */ +#undef _VA_LIST +#endif + +#ifdef _BSD_VA_LIST +#undef _BSD_VA_LIST +#endif + +#if defined(__svr4__) || (defined(_SCO_DS) && !defined(__VA_LIST)) +/* SVR4.2 uses _VA_LIST for an internal alias for va_list, + so we must avoid testing it and setting it here. + SVR4 uses _VA_LIST as a flag in stdarg.h, but we should + have no conflict with that. */ +#ifndef _VA_LIST_ +#define _VA_LIST_ +#ifdef __i860__ +#ifndef _VA_LIST +#define _VA_LIST va_list +#endif +#endif /* __i860__ */ +typedef __gnuc_va_list va_list; +#ifdef _SCO_DS +#define __VA_LIST +#endif +#endif /* _VA_LIST_ */ +#else /* not __svr4__ || _SCO_DS */ + +/* The macro _VA_LIST_ is the same thing used by this file in Ultrix. + But on BSD NET2 we must not test or define or undef it. + (Note that the comments in NET 2's ansi.h + are incorrect for _VA_LIST_--see stdio.h!) */ +#if !defined (_VA_LIST_) || defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__) || defined(WINNT) +/* The macro _VA_LIST_DEFINED is used in Windows NT 3.5 */ +#ifndef _VA_LIST_DEFINED +/* The macro _VA_LIST is used in SCO Unix 3.2. */ +#ifndef _VA_LIST +/* The macro _VA_LIST_T_H is used in the Bull dpx2 */ +#ifndef _VA_LIST_T_H +typedef __gnuc_va_list va_list; +#endif /* not _VA_LIST_T_H */ +#endif /* not _VA_LIST */ +#endif /* not _VA_LIST_DEFINED */ +#if !(defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__)) +#define _VA_LIST_ +#endif +#ifndef _VA_LIST +#define _VA_LIST +#endif +#ifndef _VA_LIST_DEFINED +#define _VA_LIST_DEFINED +#endif +#ifndef _VA_LIST_T_H +#define _VA_LIST_T_H +#endif + +#endif /* not _VA_LIST_, except on certain systems */ + +#endif /* not __svr4__ */ + +#endif /* _STDARG_H */ + +#endif /* not _ANSI_STDARG_H_ */ +#endif /* not _STDARG_H */ Added: trunk/util/mkelfImage/kunzip_src/include/stdlib.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/include/stdlib.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/include/stdlib.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,14 @@ +#ifndef STDLIB_H +#define STDLIB_H + +#include <stddef.h> + +extern void *malloc(size_t size); +void free(void *ptr); + +/* Extensions to malloc... */ +typedef size_t malloc_mark_t; +void malloc_mark(malloc_mark_t *place); +void malloc_release(malloc_mark_t *place); + +#endif /* STDLIB_H */ Added: trunk/util/mkelfImage/kunzip_src/include/string.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/include/string.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/include/string.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,31 @@ +#ifndef STRING_H +#define STRING_H + +#include <stddef.h> + +// yes, linux has fancy ones. We don't care. This stuff gets used +// hardly at all. And the pain of including those files is just too high. + +//extern inline void strcpy(char *dst, char *src) {while (*src) *dst++ = *src++;} + +//extern inline int strlen(char *src) { int i = 0; while (*src++) i++; return i;} + +static inline size_t strnlen(const char *src, size_t max) { + int i = 0; + if (max<0) { + while (*src++) + i++; + return i; + } + else { + while ((*src++) && (i < max)) + i++; + return i; + } +} + +extern void *memcpy(void *dest, const void *src, size_t n); +extern void *memset(void *s, int c, size_t n); +extern int memcmp(const void *s1, const void *s2, size_t n); + +#endif /* STRING_H */ Added: trunk/util/mkelfImage/kunzip_src/include/types.h =================================================================== --- trunk/util/mkelfImage/kunzip_src/include/types.h (rev 0) +++ trunk/util/mkelfImage/kunzip_src/include/types.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,18 @@ +#ifndef TYPES_H +#define TYPES_H + +#include <stdint.h> +#include <stddef.h> + +typedef uint8_t u8; +typedef int8_t s8; +typedef uint16_t u16; +typedef int16_t s16; +typedef uint32_t u32; +typedef int32_t s32; +typedef uint64_t u64; +typedef int64_t s64; + +/* FIXME is BITS_PER_LONG needed? */ + +#endif Added: trunk/util/mkelfImage/kunzip_src/lib/inflate.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/inflate.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/inflate.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,1178 @@ +#define DEBG(x) +#define DEBG1(x) +/* Taken from /usr/src/linux/lib/inflate.c [unmodified] + Used for start32, 1/11/2000 + James Hendricks, Dale Webster */ + +/* inflate.c -- Not copyrighted 1992 by Mark Adler + version c10p1, 10 January 1993 */ + +/* + * Adapted for booting Linux by Hannu Savolainen 1993 + * based on gzip-1.0.3 + * + * Nicolas Pitre <nico(a)cam.org>, 1999/04/14 : + * Little mods for all variable to reside either into rodata or bss segments + * by marking constant variables with 'const' and initializing all the others + * at run-time only. This allows for the kernel uncompressor to run + * directly from Flash or ROM memory on embeded systems. + */ + +/* + Inflate deflated (PKZIP's method 8 compressed) data. The compression + method searches for as much of the current string of bytes (up to a + length of 258) in the previous 32 K bytes. If it doesn't find any + matches (of at least length 3), it codes the next byte. Otherwise, it + codes the length of the matched string and its distance backwards from + the current position. There is a single Huffman code that codes both + single bytes (called "literals") and match lengths. A second Huffman + code codes the distance information, which follows a length code. Each + length or distance code actually represents a base value and a number + of "extra" (sometimes zero) bits to get to add to the base value. At + the end of each deflated block is a special end-of-block (EOB) literal/ + length code. The decoding process is basically: get a literal/length + code; if EOB then done; if a literal, emit the decoded byte; if a + length then get the distance and emit the referred-to bytes from the + sliding window of previously emitted data. + + There are (currently) three kinds of inflate blocks: stored, fixed, and + dynamic. The compressor deals with some chunk of data at a time, and + decides which method to use on a chunk-by-chunk basis. A chunk might + typically be 32 K or 64 K. If the chunk is incompressible, then the + "stored" method is used. In this case, the bytes are simply stored as + is, eight bits per byte, with none of the above coding. The bytes are + preceded by a count, since there is no longer an EOB code. + + If the data is compressible, then either the fixed or dynamic methods + are used. In the dynamic method, the compressed data is preceded by + an encoding of the literal/length and distance Huffman codes that are + to be used to decode this block. The representation is itself Huffman + coded, and so is preceded by a description of that code. These code + descriptions take up a little space, and so for small blocks, there is + a predefined set of codes, called the fixed codes. The fixed method is + used if the block codes up smaller that way (usually for quite small + chunks), otherwise the dynamic method is used. In the latter case, the + codes are customized to the probabilities in the current block, and so + can code it much better than the pre-determined fixed codes. + + The Huffman codes themselves are decoded using a multi-level table + lookup, in order to maximize the speed of decoding plus the speed of + building the decoding tables. See the comments below that precede the + lbits and dbits tuning parameters. + */ + + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarly, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + +#ifdef RCSID +static char rcsid[] = "#Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp #"; +#endif + +#ifndef STATIC + +#if defined(STDC_HEADERS) || defined(HAVE_STDLIB_H) +# include <sys/types.h> +# include <stdlib.h> +#endif + +#include "gzip.h" +#define STATIC +#endif /* !STATIC */ + +#define slide window + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). + Valid extra bits are 0..13. e == 15 is EOB (end of block), e == 16 + means that v is a literal, 16 < e < 32 means that v is a pointer to + the next table, which codes e - 16 bits, and lastly e == 99 indicates + an unused code. If a code with e == 99 is looked up, this implies an + error in the data. */ +struct huft { + uch e; /* number of extra bits or operation */ + uch b; /* number of bits in this code or subcode */ + union { + ush n; /* literal, length base, or distance base */ + struct huft *t; /* pointer to next level of table */ + } v; +}; + + +/* Function prototypes */ +STATIC int huft_build OF((unsigned *, unsigned, unsigned, + const ush *, const ush *, struct huft **, int *)); +STATIC int huft_free OF((struct huft *)); +STATIC int inflate_codes OF((struct huft *, struct huft *, int, int)); +STATIC int inflate_stored OF((void)); +STATIC int inflate_fixed OF((void)); +STATIC int inflate_dynamic OF((void)); +STATIC int inflate_block OF((int *)); +STATIC int inflate OF((void)); + + +/* The inflate algorithm uses a sliding 32 K byte window on the uncompressed + stream to find repeated byte strings. This is implemented here as a + circular buffer. The index is updated simply by incrementing and then + ANDing with 0x7fff (32K-1). */ +/* It is left to other modules to supply the 32 K area. It is assumed + to be usable as if it were declared "uch slide[32768];" or as just + "uch *slide;" and then malloc'ed in the latter case. The definition + must be in unzip.h, included above. */ +/* unsigned wp; current position in slide */ +#define wp outcnt +#define flush_output(w) (wp=(w),flush_window()) + +/* Tables for deflate from PKZIP's appnote.txt. */ +static const unsigned border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +static const ush cplens[] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* note: see note #13 above about the 258 in this list. */ +static const ush cplext[] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */ +static const ush cpdist[] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +static const ush cpdext[] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + + + +/* Macros for inflate() bit peeking and grabbing. + The usage is: + + NEEDBITS(j) + x = b & mask_bits[j]; + DUMPBITS(j) + + where NEEDBITS makes sure that b has at least j bits in it, and + DUMPBITS removes the bits from b. The macros use the variable k + for the number of bits in b. Normally, b and k are register + variables for speed, and are initialized at the beginning of a + routine that uses these macros from a global bit buffer and count. + + If we assume that EOB will be the longest code, then we will never + ask for bits with NEEDBITS that are beyond the end of the stream. + So, NEEDBITS should not read any more bytes than are needed to + meet the request. Then no bytes need to be "returned" to the buffer + at the end of the last block. + + However, this assumption is not true for fixed blocks--the EOB code + is 7 bits, but the other literal/length codes can be 8 or 9 bits. + (The EOB code is shorter than other codes because fixed blocks are + generally short. So, while a block always has an EOB, many other + literal/length codes have a significantly lower probability of + showing up at all.) However, by making the first table have a + lookup of seven bits, the EOB code will be found in that first + lookup, and so will not require that too many bits be pulled from + the stream. + */ + +STATIC ulg bb; /* bit buffer */ +STATIC unsigned bk; /* bits in bit buffer */ + +STATIC const ush mask_bits[] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + +#define NEXTBYTE() (uch)get_byte() +#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}} +#define DUMPBITS(n) {b>>=(n);k-=(n);} + + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +STATIC const int lbits = 9; /* bits in base literal/length lookup table */ +STATIC const int dbits = 6; /* bits in base distance lookup table */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ +#define BMAX 16 /* maximum bit length of any code (16 for explode) */ +#define N_MAX 288 /* maximum number of codes in any set */ + + +STATIC unsigned hufts; /* track memory usage */ + + +STATIC int huft_build(b, n, s, d, e, t, m) +unsigned *b; /* code lengths in bits (all assumed <= BMAX) */ +unsigned n; /* number of codes (assumed <= N_MAX) */ +unsigned s; /* number of simple-valued codes (0..s-1) */ +const ush *d; /* list of base values for non-simple codes */ +const ush *e; /* list of extra bits for non-simple codes */ +struct huft **t; /* result: starting table */ +int *m; /* maximum lookup bits, returns actual */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return zero on success, one if + the given code set is incomplete (the tables are still built in this + case), two if the input is invalid (all zero length codes or an + oversubscribed set of lengths), and three if not enough memory. */ +{ + unsigned a; /* counter for codes of length k */ + unsigned c[BMAX+1]; /* bit length count table */ + unsigned f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register unsigned i; /* counter, current code */ + register unsigned j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + register unsigned *p; /* pointer into c[], b[], or v[] */ + register struct huft *q; /* points to current table */ + struct huft r; /* table entry for structure assignment */ + struct huft *u[BMAX]; /* table stack */ + unsigned v[N_MAX]; /* values in order of bit length */ + register int w; /* bits before this table == (l * h) */ + unsigned x[BMAX+1]; /* bit offsets, then code stack */ + unsigned *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + unsigned z; /* number of entries in current table */ + +DEBG("huft1 "); + + /* Generate counts for each bit length */ + memzero(c, sizeof(c)); + p = b; i = n; + do { + Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"), + n-i, *p)); + c[*p]++; /* assume all entries <= BMAX */ + p++; /* Can't combine with above line (Solaris bug) */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (struct huft *)NULL; + *m = 0; + return 0; + } + +DEBG("huft2 "); + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((unsigned)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((unsigned)l > i) + l = i; + *m = l; + +DEBG("huft3 "); + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return 2; /* bad input: more codes than bits */ + if ((y -= c[i]) < 0) + return 2; + c[i] += y; + +DEBG("huft4 "); + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + +DEBG("huft5 "); + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + +DEBG("h6 "); + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (struct huft *)NULL; /* just to keep compilers happy */ + q = (struct huft *)NULL; /* ditto */ + z = 0; /* ditto */ +DEBG("h6a "); + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { +DEBG("h6b "); + a = c[k]; + while (a--) + { +DEBG("h6b1 "); + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { +DEBG1("1 "); + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = (z = g - w) > (unsigned)l ? l : z; /* upper limit on table size */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ +DEBG1("2 "); + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } +DEBG1("3 "); + z = 1 << j; /* table entries for j-bit table */ + + /* allocate and link in new table */ + if ((q = (struct huft *)malloc((z + 1)*sizeof(struct huft))) == + (struct huft *)NULL) + { + if (h) + huft_free(u[0]); + return 3; /* not enough memory */ + } +DEBG1("4 "); + hufts += z + 1; /* track memory usage */ + *t = q + 1; /* link to list for huft_free() */ + *(t = &(q->v.t)) = (struct huft *)NULL; + u[h] = ++q; /* table starts after link */ + +DEBG1("5 "); + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.b = (uch)l; /* bits to dump before this table */ + r.e = (uch)(16 + j); /* bits in this table */ + r.v.t = q; /* pointer to this table */ + j = i >> (w - l); /* (get around Turbo C bug) */ + u[h-1][j] = r; /* connect to last table */ + } +DEBG1("6 "); + } +DEBG("h6c "); + + /* set up table entry in r */ + r.b = (uch)(k - w); + if (p >= v + n) + r.e = 99; /* out of values--invalid code */ + else if (*p < s) + { + r.e = (uch)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */ + r.v.n = (ush)(*p); /* simple code is just the value */ + p++; /* one compiler does not like *p++ */ + } + else + { + r.e = (uch)e[*p - s]; /* non-simple--look up in lists */ + r.v.n = d[*p++ - s]; + } +DEBG("h6d "); + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + while ((i & ((1 << w) - 1)) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + } +DEBG("h6e "); + } +DEBG("h6f "); + } + +DEBG("huft7 "); + + /* Return true (1) if we were given an incomplete table */ + return y != 0 && g != 1; +} + + + +STATIC int huft_free(t) +struct huft *t; /* table to free */ +/* Free the malloc'ed tables built by huft_build(), which makes a linked + list of the tables it made, with the links in a dummy first entry of + each table. */ +{ + register struct huft *p, *q; + + + /* Go through linked list, freeing from the malloced (t[-1]) address. */ + p = t; + while (p != (struct huft *)NULL) + { + q = (--p)->v.t; + free((char*)p); + p = q; + } + return 0; +} + + +STATIC int inflate_codes(tl, td, bl, bd) +struct huft *tl, *td; /* literal/length and distance decoder tables */ +int bl, bd; /* number of bits decoded by tl[] and td[] */ +/* inflate (decompress) the codes in a deflated (compressed) block. + Return an error code or zero if it all goes ok. */ +{ + register unsigned e; /* table entry flag/number of extra bits */ + unsigned n, d; /* length and index for copy */ + unsigned w; /* current window position */ + struct huft *t; /* pointer to table entry */ + unsigned ml, md; /* masks for bl and bd bits */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + + + /* make local copies of globals */ + b = bb; /* initialize bit buffer */ + k = bk; + w = wp; /* initialize window position */ + + /* inflate the coded data */ + ml = mask_bits[bl]; /* precompute masks for speed */ + md = mask_bits[bd]; + for (;;) /* do until end of block */ + { + NEEDBITS((unsigned)bl) + if ((e = (t = tl + ((unsigned)b & ml))->e) > 16) + do { + if (e == 99) + return 1; + DUMPBITS(t->b) + e -= 16; + NEEDBITS(e) + } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); + DUMPBITS(t->b) + if (e == 16) /* then it's a literal */ + { + slide[w++] = (uch)t->v.n; + Tracevv((stderr, "%c", slide[w-1])); + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + } + else /* it's an EOB or a length */ + { + /* exit if end of block */ + if (e == 15) + break; + + /* get length of block to copy */ + NEEDBITS(e) + n = t->v.n + ((unsigned)b & mask_bits[e]); + DUMPBITS(e); + + /* decode distance of block to copy */ + NEEDBITS((unsigned)bd) + if ((e = (t = td + ((unsigned)b & md))->e) > 16) + do { + if (e == 99) + return 1; + DUMPBITS(t->b) + e -= 16; + NEEDBITS(e) + } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); + DUMPBITS(t->b) + NEEDBITS(e) + d = w - t->v.n - ((unsigned)b & mask_bits[e]); + DUMPBITS(e) + Tracevv((stderr,"\\[%d,%d]", w-d, n)); + + /* do the copy */ + do { + n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e); +#if !defined(NOMEMCPY) && !defined(DEBUG) + if (w - d >= e) /* (this test assumes unsigned comparison) */ + { + memcpy(slide + w, slide + d, e); + w += e; + d += e; + } + else /* do it slow to avoid memcpy() overlap */ +#endif /* !NOMEMCPY */ + do { + slide[w++] = slide[d++]; + Tracevv((stderr, "%c", slide[w-1])); + } while (--e); + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + } while (n); + } + } + + + /* restore the globals from the locals */ + wp = w; /* restore global window pointer */ + bb = b; /* restore global bit buffer */ + bk = k; + + /* done */ + return 0; +} + + + +STATIC int inflate_stored() +/* "decompress" an inflated type 0 (stored) block. */ +{ + unsigned n; /* number of bytes in block */ + unsigned w; /* current window position */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + +DEBG("<stor"); + + /* make local copies of globals */ + b = bb; /* initialize bit buffer */ + k = bk; + w = wp; /* initialize window position */ + + + /* go to byte boundary */ + n = k & 7; + DUMPBITS(n); + + + /* get the length and its complement */ + NEEDBITS(16) + n = ((unsigned)b & 0xffff); + DUMPBITS(16) + NEEDBITS(16) + if (n != (unsigned)((~b) & 0xffff)) + return 1; /* error in compressed data */ + DUMPBITS(16) + + + /* read and output the compressed data */ + while (n--) + { + NEEDBITS(8) + slide[w++] = (uch)b; + if (w == WSIZE) + { + flush_output(w); + w = 0; + } + DUMPBITS(8) + } + + + /* restore the globals from the locals */ + wp = w; /* restore global window pointer */ + bb = b; /* restore global bit buffer */ + bk = k; + + DEBG(">"); + return 0; +} + + + +STATIC int inflate_fixed() +/* decompress an inflated type 1 (fixed Huffman codes) block. We should + either replace this with a custom decoder, or at least precompute the + Huffman tables. */ +{ + int i; /* temporary variable */ + struct huft *tl; /* literal/length code table */ + struct huft *td; /* distance code table */ + int bl; /* lookup bits for tl */ + int bd; /* lookup bits for td */ + unsigned l[288]; /* length list for huft_build */ + +DEBG("<fix"); + + /* set up literal table */ + for (i = 0; i < 144; i++) + l[i] = 8; + for (; i < 256; i++) + l[i] = 9; + for (; i < 280; i++) + l[i] = 7; + for (; i < 288; i++) /* make a complete, but wrong code set */ + l[i] = 8; + bl = 7; + if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) + return i; + + + /* set up distance table */ + for (i = 0; i < 30; i++) /* make an incomplete code set */ + l[i] = 5; + bd = 5; + if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) + { + huft_free(tl); + + DEBG(">"); + return i; + } + + + /* decompress until an end-of-block code */ + if (inflate_codes(tl, td, bl, bd)) + return 1; + + + /* free the decoding tables, return */ + huft_free(tl); + huft_free(td); + return 0; +} + + + +STATIC int inflate_dynamic() +/* decompress an inflated type 2 (dynamic Huffman codes) block. */ +{ + int i; /* temporary variables */ + unsigned j; + unsigned l; /* last length */ + unsigned m; /* mask for bit lengths table */ + unsigned n; /* number of lengths to get */ + struct huft *tl; /* literal/length code table */ + struct huft *td; /* distance code table */ + int bl; /* lookup bits for tl */ + int bd; /* lookup bits for td */ + unsigned nb; /* number of bit length codes */ + unsigned nl; /* number of literal/length codes */ + unsigned nd; /* number of distance codes */ +#ifdef PKZIP_BUG_WORKAROUND + unsigned ll[288+32]; /* literal/length and distance code lengths */ +#else + unsigned ll[286+30]; /* literal/length and distance code lengths */ +#endif + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + +DEBG("<dyn"); + + /* make local bit buffer */ + b = bb; + k = bk; + + + /* read in table lengths */ + NEEDBITS(5) + nl = 257 + ((unsigned)b & 0x1f); /* number of literal/length codes */ + DUMPBITS(5) + NEEDBITS(5) + nd = 1 + ((unsigned)b & 0x1f); /* number of distance codes */ + DUMPBITS(5) + NEEDBITS(4) + nb = 4 + ((unsigned)b & 0xf); /* number of bit length codes */ + DUMPBITS(4) +#ifdef PKZIP_BUG_WORKAROUND + if (nl > 288 || nd > 32) +#else + if (nl > 286 || nd > 30) +#endif + return 1; /* bad lengths */ + +DEBG("dyn1 "); + + /* read in bit-length-code lengths */ + for (j = 0; j < nb; j++) + { + NEEDBITS(3) + ll[border[j]] = (unsigned)b & 7; + DUMPBITS(3) + } + for (; j < 19; j++) + ll[border[j]] = 0; + +DEBG("dyn2 "); + + /* build decoding table for trees--single level, 7 bit lookup */ + bl = 7; + if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) + { + if (i == 1) + huft_free(tl); + return i; /* incomplete code set */ + } + +DEBG("dyn3 "); + + /* read in literal and distance code lengths */ + n = nl + nd; + m = mask_bits[bl]; + i = l = 0; + while ((unsigned)i < n) + { + NEEDBITS((unsigned)bl) + j = (td = tl + ((unsigned)b & m))->b; + DUMPBITS(j) + j = td->v.n; + if (j < 16) /* length of code in bits (0..15) */ + ll[i++] = l = j; /* save last length in l */ + else if (j == 16) /* repeat last length 3 to 6 times */ + { + NEEDBITS(2) + j = 3 + ((unsigned)b & 3); + DUMPBITS(2) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = l; + } + else if (j == 17) /* 3 to 10 zero length codes */ + { + NEEDBITS(3) + j = 3 + ((unsigned)b & 7); + DUMPBITS(3) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = 0; + l = 0; + } + else /* j == 18: 11 to 138 zero length codes */ + { + NEEDBITS(7) + j = 11 + ((unsigned)b & 0x7f); + DUMPBITS(7) + if ((unsigned)i + j > n) + return 1; + while (j--) + ll[i++] = 0; + l = 0; + } + } + +DEBG("dyn4 "); + + /* free decoding table for trees */ + huft_free(tl); + +DEBG("dyn5 "); + + /* restore the global bit buffer */ + bb = b; + bk = k; + +DEBG("dyn5a "); + + /* build the decoding tables for literal/length and distance codes */ + bl = lbits; + if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) + { +DEBG("dyn5b "); + if (i == 1) { + error(" incomplete literal tree\n"); + huft_free(tl); + } + return i; /* incomplete code set */ + } +DEBG("dyn5c "); + bd = dbits; + if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) + { +DEBG("dyn5d "); + if (i == 1) { + error(" incomplete distance tree\n"); +#ifdef PKZIP_BUG_WORKAROUND + i = 0; + } +#else + huft_free(td); + } + huft_free(tl); + return i; /* incomplete code set */ +#endif + } + +DEBG("dyn6 "); + + /* decompress until an end-of-block code */ + if (inflate_codes(tl, td, bl, bd)) + return 1; + +DEBG("dyn7 "); + + /* free the decoding tables, return */ + huft_free(tl); + huft_free(td); + + DEBG(">"); + return 0; +} + + + +STATIC int inflate_block(e) +int *e; /* last block flag */ +/* decompress an inflated block */ +{ + unsigned t; /* block type */ + register ulg b; /* bit buffer */ + register unsigned k; /* number of bits in bit buffer */ + + DEBG("<blk"); + + /* make local bit buffer */ + b = bb; + k = bk; + + + /* read in last block bit */ + NEEDBITS(1) + *e = (int)b & 1; + DUMPBITS(1) + + + /* read in block type */ + NEEDBITS(2) + t = (unsigned)b & 3; + DUMPBITS(2) + + + /* restore the global bit buffer */ + bb = b; + bk = k; + + /* inflate that block type */ + if (t == 2) + return inflate_dynamic(); + if (t == 0) + return inflate_stored(); + if (t == 1) + return inflate_fixed(); + + DEBG(">"); + + /* bad block type */ + return 2; +} + + + +STATIC int inflate() +/* decompress an inflated entry */ +{ + int e; /* last block flag */ + int r; /* result code */ + unsigned h; /* maximum struct huft's malloc'ed */ + malloc_mark_t mark; + + /* initialize window, bit buffer */ + wp = 0; + bk = 0; + bb = 0; + + + /* decompress until the last block */ + h = 0; + do { + hufts = 0; + malloc_mark(&mark); + if ((r = inflate_block(&e)) != 0) { + malloc_release(&mark); + return r; + } + malloc_release(&mark); + if (hufts > h) + h = hufts; + } while (!e); + + /* Undo too much lookahead. The next read will be byte aligned so we + * can discard unused bits in the last meaningful byte. + */ + while (bk >= 8) { + bk -= 8; + inptr--; + } + + /* flush out slide */ + flush_output(wp); + + + /* return success */ + DBG(("<%u> ", h)); + return 0; +} + +/********************************************************************** + * + * The following are support routines for inflate.c + * + **********************************************************************/ + +static ulg crc_32_tab[256]; +static ulg crc; /* initialized in makecrc() so it'll reside in bss */ +#define CRC_VALUE (crc ^ 0xffffffffL) + +/* + * Code to compute the CRC-32 table. Borrowed from + * gzip-1.0.3/makecrc.c. + */ + +static void +makecrc(void) +{ +/* Not copyrighted 1990 Mark Adler */ + + unsigned long c; /* crc shift register */ + unsigned long e; /* polynomial exclusive-or pattern */ + int i; /* counter for all possible eight bit values */ + int k; /* byte being shifted into crc apparatus */ + + /* terms of polynomial defining this crc (except x^32): */ + static const int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* Make exclusive-or pattern from polynomial */ + e = 0; + for (i = 0; i < sizeof(p)/sizeof(int); i++) + e |= 1L << (31 - p[i]); + + crc_32_tab[0] = 0; + + for (i = 1; i < 256; i++) + { + c = 0; + for (k = i | 256; k != 1; k >>= 1) + { + c = c & 1 ? (c >> 1) ^ e : c >> 1; + if (k & 1) + c ^= e; + } + crc_32_tab[i] = c; + } + + /* this is initialized here so this code could reside in ROM */ + crc = (ulg)0xffffffffL; /* shift register contents */ +} + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +/* + * Do the uncompression! + */ +int gunzip(void) +{ + uch flags; + unsigned char magic[2]; /* magic header */ + char method; + ulg orig_crc = 0; /* original crc */ + ulg orig_len = 0; /* original uncompressed length */ + int res; + + magic[0] = (unsigned char)get_byte(); + magic[1] = (unsigned char)get_byte(); + method = (unsigned char)get_byte(); + + if (magic[0] != 037 || + ((magic[1] != 0213) && (magic[1] != 0236))) { + error("bad gzip magic numbers"); + return -1; + } + + /* We only support method #8, DEFLATED */ + if (method != 8) { + error("internal error, invalid method"); + return -1; + } + + flags = (uch)get_byte(); + if ((flags & ENCRYPTED) != 0) { + error("Input is encrypted\n"); + return -1; + } + if ((flags & CONTINUATION) != 0) { + error("Multi part input\n"); + return -1; + } + if ((flags & RESERVED) != 0) { + error("Input has invalid flags\n"); + return -1; + } + (ulg)get_byte(); /* Get timestamp */ + ((ulg)get_byte()) << 8; + ((ulg)get_byte()) << 16; + ((ulg)get_byte()) << 24; + + (void)get_byte(); /* Ignore extra flags for the moment */ + (void)get_byte(); /* Ignore OS type for the moment */ + + if ((flags & EXTRA_FIELD) != 0) { + unsigned len = (unsigned)get_byte(); + len |= ((unsigned)get_byte())<<8; + while (len--) (void)get_byte(); + } + + /* Get original file name if it was truncated */ + if ((flags & ORIG_NAME) != 0) { + /* Discard the old name */ + while (get_byte() != 0) /* null */ ; + } + + /* Discard file comment if any */ + if ((flags & COMMENT) != 0) { + while (get_byte() != 0) /* null */ ; + } + + /* Decompress */ + if ((res = inflate())) { + switch (res) { + case 0: + break; + case 1: + error("invalid compressed format (err=1)"); + break; + case 2: + error("invalid compressed format (err=2)"); + break; + case 3: + error("out of memory"); + break; + default: + error("invalid compressed format (other)"); + } + return -1; + } + + /* Get the crc and original length */ + /* crc32 (see algorithm.doc) + * uncompressed input size modulo 2^32 + */ + orig_crc = (ulg) get_byte(); + orig_crc |= (ulg) get_byte() << 8; + orig_crc |= (ulg) get_byte() << 16; + orig_crc |= (ulg) get_byte() << 24; + + orig_len = (ulg) get_byte(); + orig_len |= (ulg) get_byte() << 8; + orig_len |= (ulg) get_byte() << 16; + orig_len |= (ulg) get_byte() << 24; + + /* Validate decompression */ + if (orig_crc != CRC_VALUE) { + error("crc error"); + return -1; + } + if (orig_len != bytes_out) { + error("length error"); + return -1; + } + return 0; +} + + Added: trunk/util/mkelfImage/kunzip_src/lib/kunzip.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/kunzip.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/kunzip.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,170 @@ +#include <string.h> +#include <stdlib.h> + +/* + * gzip support routine declartions.. + * ========================================================= + */ + +#ifdef DEBUG +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +# define DBG(x) printf x +#else +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +# define DBG(x) +#endif + +void error(char *str) +{ + DBG(("%s\n", str)); +} + +static unsigned char *inbuf; /* input buffer */ +static unsigned int insize; /* valid bytes in inbuf */ +static unsigned int inptr; /* index of next byte to be processed in inbuf */ + +#if !defined(DEBUG) +#define get_byte() (inptr < insize ? inbuf[inptr++] : 0) +#else +static unsigned char get_byte(void) +{ + static int count; + unsigned char byte = (inptr < insize ? inbuf[inptr++] : 0); +#if 0 + printf("%02x ", byte); + if ((++count & 0x0f) == 0) { + printf("\n"); + } +#endif + return byte; +} + +#endif + +static void flush_window(void); + +static long bytes_out; /* total bytes compressed */ +static unsigned outcnt; /* bytes in output buffer */ + +#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of two */ +static unsigned char window[WSIZE]; /* Sliding window buffer */ + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + + +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + + + +#include "inflate.c" + + +/* Variables that gunzip doesn't need to see... */ +static unsigned char *output_ptr; +static unsigned long end_offset; +static struct unzip_region { + unsigned long start; + unsigned long end_offset; +} unzip_region; + +/* Data provided by the header */ +extern unsigned char zipped_data[]; +extern unsigned char zipped_data_end[]; +extern unsigned char entry; +/* Assembly language routines */ +extern void jmp_to_program_entry(void *); + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ +static void flush_window(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + unsigned long limit; + uch *in, *out, ch; + + limit = outcnt; + + + n = 0; + in = window; + while (n < outcnt) { + limit = end_offset - bytes_out +n; + if (limit > outcnt) { + limit = outcnt; + } + out = output_ptr; + DBG(("flush 0x%08lx start 0x%08lx limit 0x%08lx\n", + (unsigned long) out, (unsigned long)n, limit)); + for (; n < limit; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (out - output_ptr); + output_ptr = out; + if (bytes_out == end_offset) { + if (output_ptr == (unsigned char *)(&unzip_region+1)) { + output_ptr = (unsigned char *)(unzip_region.start); + end_offset = unzip_region.end_offset; + } else { + output_ptr = (unsigned char *)&unzip_region; + end_offset += sizeof(unzip_region); + } + } + } + outcnt = 0; +} + + +void gunzip_setup(void) +{ + DBG(("gunzip_setup\n")); + outcnt = 0; + bytes_out = 0; + + end_offset = sizeof(unzip_region); + output_ptr = (unsigned char *)&unzip_region; + + inbuf = &zipped_data[0]; + insize = zipped_data_end - zipped_data; + inptr = 0; + + makecrc(); + DBG(("gunzip_setup_done\n")); +} + + +int kunzip(int argc, char **argv) +{ + DBG(("kunzip\n")); + gunzip_setup(); + DBG(("pre_gunzip\n")); + if (gunzip() != 0) { + error("gunzip failed"); + while(1) {} + return -1; + } + DBG(("pre_jmp_to_program_entry: %p\n", &entry )); + jmp_to_program_entry(&entry); + return 0; +} Added: trunk/util/mkelfImage/kunzip_src/lib/malloc.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/malloc.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/malloc.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,42 @@ +#include <stdlib.h> + +extern unsigned char _heap, _eheap; +static size_t free_mem_ptr = (size_t)&_heap; /* Start of heap */ +static size_t free_mem_end_ptr = (size_t)&_eheap; /* End of heap */ + + +void malloc_mark(malloc_mark_t *place) +{ + *place = free_mem_ptr; +} + +void malloc_release(malloc_mark_t *ptr) +{ + free_mem_ptr = *ptr; +} + +void *malloc(size_t size) +{ + void *p; + + if (size < 0) + error("Error! malloc: Size < 0"); + if (free_mem_ptr <= 0) + error("Error! malloc: Free_mem_ptr <= 0"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *) free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("Error! malloc: Free_mem_ptr >= free_mem_end_ptr"); + + + return p; +} + +void free(void *where) +{ + /* Don't care */ +} Added: trunk/util/mkelfImage/kunzip_src/lib/memcmp.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/memcmp.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/memcmp.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,17 @@ +#include <string.h> + +int memcmp(const void *src1, const void *src2, size_t bytes) +{ + const unsigned char *s1, *s2; + int result; + s1 = src1; + s2 = src2; + result = 0; + while((bytes > 0) && (result == 0)) { + result = *s1 - *s2; + bytes--; + s1++; + s2++; + } + return result; +} Added: trunk/util/mkelfImage/kunzip_src/lib/memcpy.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/memcpy.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/memcpy.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,11 @@ +#include <string.h> +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + int i; + char *d = (char *) __dest, *s = (char *) __src; + + for (i = 0; i < __n; i++) + d[i] = s[i]; + + return __dest; +} Added: trunk/util/mkelfImage/kunzip_src/lib/memset.c =================================================================== --- trunk/util/mkelfImage/kunzip_src/lib/memset.c (rev 0) +++ trunk/util/mkelfImage/kunzip_src/lib/memset.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,12 @@ +#include <string.h> + +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = (char *) s; + + for (i = 0; i < n; i++) + ss[i] = c; + + return s; +} Added: trunk/util/mkelfImage/linux-i386/Makefile =================================================================== --- trunk/util/mkelfImage/linux-i386/Makefile (rev 0) +++ trunk/util/mkelfImage/linux-i386/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,35 @@ +LI386_DIR:=linux-i386 +LI386_OBJ:=$(OBJDIR)/$(LI386_DIR) +LI386_DEP=Makefile Makefile.conf $(LI386_DIR)/Makefile + +$(LI386_OBJ)/mkelf-linux-i386.o: $(LI386_DIR)/mkelf-linux-i386.c $(LI386_DIR)/convert.bin.c $(LI386_DEP) + $(MKDIR) -p $(@D) + $(HOST_CC) $(HOST_CFLAGS) -c -g $< -o $@ + + +ifdef I386_CC + +$(LI386_DIR)/convert.bin.c: $(LI386_OBJ)/convert.bin $(OBJDIR)/bin/bin-to-hex $(LI386_DEP) + $(MKDIR) -p $(@D) + $(OBJDIR)/bin/bin-to-hex < $(LI386_OBJ)/convert.bin > $@ + +$(LI386_OBJ)/convert.bin: $(LI386_OBJ)/convert $(LI386_DEP) + $(MKDIR) -p $(@D) + $(I386_OBJCOPY) -O binary $< $@ + +CONVERT_LI386_OBJS=$(LI386_OBJ)/head.o $(LI386_OBJ)/convert_params.o + +$(LI386_OBJ)/convert: $(LI386_DIR)/convert.lds $(CONVERT_LI386_OBJS) $(LI386_DEP) + $(MKDIR) -p $(@D) + $(I386_LD) $(I386_LDFLAGS) -T $(LI386_DIR)/convert.lds -o $@ $(CONVERT_LI386_OBJS) + +$(LI386_OBJ)/head.o: $(LI386_DIR)/head.S $(LI386_DIR)/convert.h + $(MKDIR) -p $(@D) + $(I386_CPP) $(I386_CPPFLAGS) -DASSEMBLY $< | $(I386_AS) $(I386_ASFLAGS) -o $@ + +$(LI386_OBJ)/convert_params.o: $(LI386_DIR)/convert_params.c $(LI386_DIR)/convert.h $(LI386_DEP) + $(MKDIR) -p $(@D) + $(I386_CC) $(I386_CFLAGS) -c -o $@ $< + +endif + Added: trunk/util/mkelfImage/linux-i386/convert.bin.c =================================================================== --- trunk/util/mkelfImage/linux-i386/convert.bin.c (rev 0) +++ trunk/util/mkelfImage/linux-i386/convert.bin.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,284 @@ +0xfc, 0xfa, 0xa3, 0xee, 0x01, 0x01, 0x00, 0x89, 0x1d, 0xf2, 0x01, 0x01, 0x00, 0x83, 0xfc, 0x00, +0x74, 0x09, 0x8b, 0x44, 0x24, 0x04, 0xa3, 0xf6, 0x01, 0x01, 0x00, 0x8b, 0x25, 0x8c, 0x10, 0x01, +0x00, 0x6a, 0x00, 0x9d, 0x31, 0xc0, 0xbf, 0xbc, 0x11, 0x01, 0x00, 0xb9, 0x44, 0x54, 0x01, 0x00, +0x29, 0xf9, 0xfc, 0xf3, 0xaa, 0xbe, 0x0c, 0x02, 0x01, 0x00, 0xbf, 0x00, 0x10, 0x02, 0x00, 0xb9, +0x70, 0x00, 0x00, 0x00, 0xf3, 0xa4, 0x0f, 0x01, 0x15, 0x06, 0x02, 0x01, 0x00, 0x0f, 0x01, 0x1d, +0x00, 0x02, 0x01, 0x00, 0xb8, 0x18, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x8e, 0xc0, 0x8e, 0xe0, 0x8e, +0xe8, 0x8e, 0xd0, 0x68, 0xa0, 0x10, 0x01, 0x00, 0xff, 0x35, 0xf6, 0x01, 0x01, 0x00, 0xff, 0x35, +0xf2, 0x01, 0x01, 0x00, 0xff, 0x35, 0xee, 0x01, 0x01, 0x00, 0xe8, 0x50, 0x08, 0x00, 0x00, 0x89, +0xc6, 0x83, 0xc4, 0x10, 0x6a, 0x00, 0x9d, 0x31, 0xdb, 0x31, 0xc0, 0x31, 0xc9, 0x31, 0xd2, 0x31, +0xff, 0x31, 0xe4, 0x31, 0xed, 0xea, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00, 0x55, 0x89, 0xe5, 0x53, +0x56, 0x57, 0x8b, 0x7d, 0x08, 0x81, 0xef, 0x00, 0x00, 0x01, 0x00, 0x8b, 0x75, 0x0c, 0x56, 0xe8, +0xfc, 0x00, 0x00, 0x00, 0x66, 0x31, 0xdb, 0x66, 0xb8, 0x20, 0xe8, 0x00, 0x00, 0x66, 0xba, 0x50, +0x41, 0x4d, 0x53, 0x66, 0xb9, 0x14, 0x00, 0x00, 0x00, 0xcd, 0x15, 0x72, 0x18, 0x66, 0x3d, 0x50, +0x41, 0x4d, 0x53, 0x75, 0x10, 0x66, 0x4e, 0x66, 0x85, 0xf6, 0x74, 0x09, 0x83, 0xc7, 0x14, 0x66, +0x83, 0xfb, 0x00, 0x75, 0xd2, 0x66, 0xe8, 0x82, 0x00, 0x00, 0x00, 0x58, 0x29, 0xf0, 0x5f, 0x5e, +0x5b, 0x89, 0xec, 0x5d, 0xc3, 0x53, 0x56, 0x57, 0xe8, 0xb3, 0x00, 0x00, 0x00, 0xf9, 0x31, 0xc9, +0x31, 0xd2, 0xb8, 0x01, 0xe8, 0xcd, 0x15, 0x72, 0x28, 0x83, 0xf9, 0x00, 0x75, 0x09, 0x83, 0xfa, +0x00, 0x75, 0x04, 0x89, 0xc1, 0x89, 0xda, 0x66, 0x81, 0xe2, 0xff, 0xff, 0x00, 0x00, 0x66, 0xc1, +0xe2, 0x06, 0x66, 0x89, 0xd0, 0x66, 0x81, 0xe1, 0xff, 0xff, 0x00, 0x00, 0x66, 0x01, 0xc8, 0xeb, +0x03, 0x66, 0x31, 0xc0, 0x66, 0xe8, 0x33, 0x00, 0x00, 0x00, 0x5f, 0x5e, 0x5b, 0xc3, 0x53, 0x56, +0x57, 0xe8, 0x6a, 0x00, 0x00, 0x00, 0xb4, 0x88, 0xcd, 0x15, 0x66, 0x25, 0xff, 0xff, 0x00, 0x00, +0x66, 0xe8, 0x17, 0x00, 0x00, 0x00, 0x5f, 0x5e, 0x5b, 0xc3, 0xe8, 0x51, 0x00, 0x00, 0x00, 0xcd, +0x12, 0x89, 0xc1, 0x66, 0xe8, 0x04, 0x00, 0x00, 0x00, 0x66, 0x89, 0xc8, 0xc3, 0xfa, 0x2e, 0x67, +0x0f, 0x01, 0x15, 0x06, 0x02, 0x00, 0x00, 0x0f, 0x20, 0xc0, 0x66, 0x83, 0xc8, 0x01, 0x0f, 0x22, +0xc0, 0x66, 0xea, 0x89, 0x01, 0x01, 0x00, 0x10, 0x00, 0xb8, 0x18, 0x00, 0x00, 0x00, 0x8e, 0xd8, +0x8e, 0xc0, 0x8e, 0xd0, 0x81, 0xc4, 0x00, 0x00, 0x01, 0x00, 0x31, 0xc0, 0x8e, 0xe0, 0x8e, 0xe8, +0x58, 0x05, 0x00, 0x00, 0x01, 0x00, 0x50, 0x2e, 0x0f, 0x01, 0x1d, 0x00, 0x02, 0x01, 0x00, 0xc3, +0x58, 0x2d, 0x00, 0x00, 0x01, 0x00, 0x50, 0x81, 0xec, 0x00, 0x00, 0x01, 0x00, 0xea, 0xc4, 0x01, +0x00, 0x00, 0x08, 0x00, 0x0f, 0x20, 0xc0, 0x66, 0x83, 0xe0, 0xfe, 0x0f, 0x22, 0xc0, 0x66, 0xea, +0xd6, 0x01, 0x00, 0x00, 0x00, 0x10, 0x8c, 0xc8, 0x8e, 0xd8, 0x8e, 0xc0, 0x8e, 0xd0, 0x8e, 0xe0, +0x8e, 0xe8, 0x2e, 0x67, 0x0f, 0x01, 0x1d, 0xfa, 0x01, 0x00, 0x00, 0xfb, 0x66, 0xc3, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6f, 0x00, 0x00, 0x10, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x01, 0x9b, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, +0x00, 0x9a, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, +0x01, 0x93, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, +0x00, 0x9a, 0xcf, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x55, 0x89, 0xe5, 0x89, +0xc1, 0xba, 0xfd, 0x03, 0x00, 0x00, 0xec, 0xa8, 0x20, 0x74, 0xf6, 0xb2, 0xf8, 0x88, 0xc8, 0xee, +0xba, 0xfd, 0x03, 0x00, 0x00, 0xec, 0xa8, 0x40, 0x74, 0xf6, 0xc9, 0xc3, 0x55, 0x83, 0xf8, 0x0a, +0x89, 0xe5, 0x53, 0x89, 0xc3, 0x75, 0x0a, 0xb8, 0x0d, 0x00, 0x00, 0x00, 0xe8, 0xcb, 0xff, 0xff, +0xff, 0x89, 0xd8, 0x5b, 0xc9, 0xeb, 0xc5, 0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x83, 0xec, 0x44, +0x8d, 0x45, 0x0c, 0x8b, 0x75, 0x08, 0x89, 0x45, 0xc0, 0x80, 0x3e, 0x00, 0x0f, 0x84, 0x5b, 0x01, +0x00, 0x00, 0x8a, 0x06, 0x3c, 0x25, 0x74, 0x0d, 0x0f, 0xbe, 0xc0, 0xe8, 0xbc, 0xff, 0xff, 0xff, +0xe9, 0x42, 0x01, 0x00, 0x00, 0x46, 0x8a, 0x06, 0x3c, 0x73, 0x75, 0x1d, 0x8b, 0x45, 0xc0, 0x8b, +0x18, 0x83, 0x45, 0xc0, 0x04, 0x80, 0x3b, 0x00, 0x0f, 0x84, 0x29, 0x01, 0x00, 0x00, 0x0f, 0xbe, +0x03, 0xe8, 0x96, 0xff, 0xff, 0xff, 0x43, 0xeb, 0xec, 0x3c, 0x4c, 0x8d, 0x7d, 0xc4, 0xc7, 0x45, +0xbc, 0x1c, 0x00, 0x00, 0x00, 0x75, 0x09, 0xc7, 0x45, 0xbc, 0x3c, 0x00, 0x00, 0x00, 0xeb, 0x1c, +0x3c, 0x6c, 0x74, 0x18, 0x3c, 0x68, 0x75, 0x15, 0xc7, 0x45, 0xbc, 0x0c, 0x00, 0x00, 0x00, 0x46, +0x80, 0x3e, 0x68, 0x75, 0x08, 0xc7, 0x45, 0xbc, 0x04, 0x00, 0x00, 0x00, 0x46, 0x8a, 0x16, 0x88, +0xd0, 0x83, 0xc8, 0x20, 0x3c, 0x78, 0x75, 0x61, 0x83, 0x7d, 0xbc, 0x1c, 0x7e, 0x0e, 0x8b, 0x45, +0xc0, 0x8b, 0x08, 0x83, 0x45, 0xc0, 0x08, 0x8b, 0x58, 0x04, 0xeb, 0x0b, 0x8b, 0x45, 0xc0, 0x8b, +0x08, 0x83, 0x45, 0xc0, 0x04, 0x31, 0xdb, 0x89, 0x5d, 0xb4, 0x89, 0xd3, 0x83, 0xe3, 0x20, 0x89, +0x4d, 0xb0, 0x89, 0x5d, 0xb8, 0x83, 0x7d, 0xbc, 0x00, 0x0f, 0x88, 0x96, 0x00, 0x00, 0x00, 0x8a, +0x4d, 0xbc, 0x8b, 0x55, 0xb4, 0x8b, 0x45, 0xb0, 0x0f, 0xad, 0xd0, 0xd3, 0xea, 0x80, 0xe1, 0x20, +0x74, 0x02, 0x89, 0xd0, 0x83, 0xe0, 0x0f, 0x8a, 0x5d, 0xb8, 0x0a, 0x98, 0x48, 0x0f, 0x01, 0x00, +0x88, 0x1f, 0x47, 0x83, 0x6d, 0xbc, 0x04, 0xeb, 0xd0, 0x80, 0xfa, 0x64, 0x75, 0x4e, 0x83, 0x7d, +0xbc, 0x1c, 0x7e, 0x09, 0x8b, 0x45, 0xc0, 0x83, 0x45, 0xc0, 0x08, 0xeb, 0x07, 0x8b, 0x45, 0xc0, +0x83, 0x45, 0xc0, 0x04, 0x8b, 0x10, 0x85, 0xd2, 0x79, 0x06, 0xc6, 0x07, 0x2d, 0xf7, 0xda, 0x47, +0x89, 0xfb, 0x89, 0xd0, 0x99, 0xb9, 0x0a, 0x00, 0x00, 0x00, 0xf7, 0xf9, 0x83, 0xc2, 0x30, 0x88, +0x17, 0x47, 0x85, 0xc0, 0x89, 0xc2, 0x75, 0xea, 0x8d, 0x4f, 0xff, 0x39, 0xd9, 0x76, 0x26, 0x0f, +0xbe, 0x11, 0x8a, 0x03, 0x88, 0x01, 0x88, 0x13, 0x49, 0x43, 0xeb, 0xef, 0x80, 0xfa, 0x63, 0x8d, +0x4f, 0x01, 0x75, 0x0d, 0x8b, 0x45, 0xc0, 0x8b, 0x00, 0x83, 0x45, 0xc0, 0x04, 0x88, 0x07, 0xeb, +0x02, 0x88, 0x17, 0x89, 0xcf, 0x8d, 0x5d, 0xc4, 0x39, 0xfb, 0x73, 0x0b, 0x0f, 0xbe, 0x03, 0xe8, +0x78, 0xfe, 0xff, 0xff, 0x43, 0xeb, 0xf1, 0x46, 0xe9, 0x9c, 0xfe, 0xff, 0xff, 0x83, 0xc4, 0x44, +0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x8b, 0x55, 0x08, 0x8b, 0x4d, 0x0c, 0x31, 0xc0, +0xeb, 0x07, 0x80, 0x3a, 0x00, 0x74, 0x06, 0x40, 0x42, 0x39, 0xc8, 0x72, 0xf5, 0xc9, 0xc3, 0x55, +0x89, 0xe5, 0x8b, 0x45, 0x08, 0x53, 0x8b, 0x4d, 0x10, 0x8b, 0x5d, 0x0c, 0x31, 0xd2, 0x39, 0xca, +0x73, 0x06, 0x88, 0x1c, 0x10, 0x42, 0xeb, 0xf6, 0x5b, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, +0x8b, 0x4d, 0x08, 0x8b, 0x75, 0x0c, 0x8b, 0x5d, 0x10, 0x31, 0xd2, 0x39, 0xda, 0x73, 0x09, 0x8a, +0x04, 0x16, 0x88, 0x04, 0x11, 0x42, 0xeb, 0xf3, 0x5b, 0x89, 0xc8, 0x5e, 0xc9, 0xc3, 0x55, 0x89, +0xe5, 0x57, 0x56, 0x53, 0x8b, 0x7d, 0x08, 0x8b, 0x75, 0x0c, 0x8b, 0x5d, 0x10, 0x31, 0xd2, 0x39, +0xda, 0x73, 0x15, 0x8a, 0x0f, 0x8a, 0x06, 0x38, 0xc1, 0x74, 0x0a, 0x0f, 0xb6, 0xd0, 0x0f, 0xb6, +0xc1, 0x29, 0xc2, 0xeb, 0x05, 0x42, 0xeb, 0xe7, 0x31, 0xd2, 0x5b, 0x5e, 0x89, 0xd0, 0x5f, 0xc9, +0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x89, 0xd3, 0x51, 0x31, 0xc9, 0x31, 0xd2, 0x89, 0xc6, 0x39, +0xd9, 0x73, 0x26, 0xf6, 0xc2, 0x01, 0x0f, 0xb6, 0x04, 0x16, 0x74, 0x03, 0xc1, 0xe0, 0x08, 0x01, +0xc1, 0x81, 0xf9, 0xff, 0xff, 0x00, 0x00, 0x76, 0x0b, 0x89, 0xc8, 0xc1, 0xe8, 0x10, 0x8d, 0x04, +0x01, 0x0f, 0xb7, 0xc8, 0x42, 0x39, 0xda, 0xeb, 0xd8, 0x88, 0x4d, 0xf6, 0xc1, 0xe9, 0x08, 0x88, +0x4d, 0xf7, 0x66, 0x8b, 0x45, 0xf6, 0x5a, 0x5b, 0xf7, 0xd0, 0x0f, 0xb7, 0xc0, 0x5e, 0xc9, 0xc3, +0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x8b, 0x5d, 0x08, 0x68, 0x00, 0x01, 0x00, 0x00, 0x8d, 0x83, +0x00, 0x08, 0x00, 0x00, 0x50, 0x8b, 0x7d, 0x10, 0xe8, 0x08, 0xff, 0xff, 0xff, 0x01, 0xc3, 0x5e, +0xb8, 0xff, 0x00, 0x00, 0x00, 0x5a, 0xc6, 0x83, 0x00, 0x08, 0x00, 0x00, 0x20, 0x81, 0xc3, 0x01, +0x08, 0x00, 0x00, 0x39, 0xf8, 0x7e, 0x02, 0x89, 0xf8, 0x50, 0xff, 0x75, 0x0c, 0xe8, 0xe3, 0xfe, +0xff, 0xff, 0x50, 0xff, 0x75, 0x0c, 0x89, 0xc6, 0x53, 0xe8, 0x0d, 0xff, 0xff, 0xff, 0xc6, 0x04, +0x33, 0x00, 0x8d, 0x65, 0xf4, 0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x55, 0x81, 0xfa, 0xff, 0xff, 0x3f, +0x00, 0x89, 0xe5, 0x89, 0xd1, 0x53, 0x89, 0xc3, 0x76, 0x05, 0xb9, 0xff, 0xff, 0x3f, 0x00, 0x8b, +0x83, 0xe0, 0x01, 0x00, 0x00, 0x05, 0x00, 0x04, 0x00, 0x00, 0x39, 0xc1, 0x76, 0x24, 0x8d, 0x91, +0x00, 0xfc, 0xff, 0xff, 0x8d, 0x81, 0x00, 0xfc, 0xff, 0xff, 0x81, 0xfa, 0xff, 0xff, 0x00, 0x00, +0x89, 0x93, 0xe0, 0x01, 0x00, 0x00, 0x66, 0x89, 0x43, 0x02, 0x76, 0x06, 0x66, 0xc7, 0x43, 0x02, +0x00, 0xfc, 0x5b, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x83, 0xec, 0x10, 0x89, 0xc1, 0x8b, +0x55, 0x0c, 0x8b, 0x45, 0x08, 0x8b, 0x5d, 0x10, 0x8b, 0x75, 0x14, 0x89, 0x55, 0xf4, 0x89, 0x45, +0xf0, 0x89, 0x5d, 0xe8, 0x89, 0x75, 0xec, 0x0f, 0xb6, 0x81, 0xe8, 0x01, 0x00, 0x00, 0x83, 0xf8, +0x1f, 0x8b, 0x55, 0x18, 0x7f, 0x35, 0x6b, 0xc0, 0x14, 0x01, 0xc8, 0x8b, 0x5d, 0xf0, 0x8b, 0x75, +0xf4, 0x89, 0x98, 0xd0, 0x02, 0x00, 0x00, 0x89, 0xb0, 0xd4, 0x02, 0x00, 0x00, 0x8b, 0x5d, 0xe8, +0x8b, 0x75, 0xec, 0x89, 0x98, 0xd8, 0x02, 0x00, 0x00, 0x89, 0xb0, 0xdc, 0x02, 0x00, 0x00, 0x89, +0x90, 0xe0, 0x02, 0x00, 0x00, 0xfe, 0x81, 0xe8, 0x01, 0x00, 0x00, 0x4a, 0x75, 0x2e, 0x8b, 0x45, +0xf0, 0x03, 0x45, 0xe8, 0x8b, 0x55, 0xf4, 0x13, 0x55, 0xec, 0x81, 0xfa, 0xff, 0x03, 0x00, 0x00, +0x72, 0x07, 0x76, 0x05, 0x83, 0xca, 0xff, 0xeb, 0x06, 0x0f, 0xac, 0xd0, 0x0a, 0x89, 0xc2, 0x83, +0xc4, 0x10, 0x5b, 0x5e, 0x89, 0xc8, 0xc9, 0xe9, 0x1e, 0xff, 0xff, 0xff, 0x83, 0xc4, 0x10, 0x5b, +0x5e, 0xc9, 0xc3, 0x55, 0x89, 0xe5, 0x8b, 0x45, 0x0c, 0x8b, 0x55, 0x10, 0x89, 0x45, 0x10, 0x8b, +0x45, 0x08, 0x8b, 0x40, 0x10, 0x89, 0x55, 0x0c, 0x89, 0x45, 0x08, 0xc9, 0xe9, 0x9f, 0xfe, 0xff, +0xff, 0x55, 0x89, 0xe5, 0x57, 0x56, 0x53, 0x39, 0xd0, 0x56, 0x56, 0x89, 0xc7, 0x89, 0x55, 0xf0, +0x73, 0x77, 0x8d, 0x58, 0x18, 0x81, 0x7b, 0xe8, 0x4c, 0x42, 0x49, 0x4f, 0x75, 0x60, 0x83, 0x7b, +0xec, 0x18, 0x75, 0x5a, 0xba, 0x18, 0x00, 0x00, 0x00, 0x89, 0xf8, 0xe8, 0x21, 0xfe, 0xff, 0xff, +0x85, 0xc0, 0x75, 0x4a, 0x8b, 0x53, 0xf4, 0x89, 0xd8, 0xe8, 0x13, 0xfe, 0xff, 0xff, 0x3b, 0x43, +0xf8, 0x75, 0x3b, 0x89, 0xde, 0x03, 0x73, 0xf4, 0x39, 0xf3, 0xc7, 0x45, 0xec, 0x00, 0x00, 0x00, +0x00, 0x89, 0xd9, 0x73, 0x1d, 0x89, 0xf0, 0x29, 0xd8, 0x8b, 0x53, 0x04, 0x39, 0xc2, 0x77, 0x12, +0x01, 0xd1, 0xff, 0x45, 0xec, 0x39, 0xf1, 0x73, 0x09, 0x89, 0xf0, 0x29, 0xc8, 0x8b, 0x51, 0x04, +0xeb, 0xea, 0x8b, 0x45, 0xec, 0x3b, 0x43, 0xfc, 0x75, 0x04, 0x89, 0xf8, 0xeb, 0x0d, 0x83, 0xc7, +0x10, 0x83, 0xc3, 0x10, 0x3b, 0x7d, 0xf0, 0x72, 0x8c, 0x31, 0xc0, 0x59, 0x5b, 0x5b, 0x5e, 0x5f, +0xc9, 0xc3, 0x55, 0x89, 0xe5, 0xba, 0x00, 0x10, 0x00, 0x00, 0x53, 0x89, 0xc3, 0x31, 0xc0, 0xe8, +0x5d, 0xff, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x15, 0xba, 0x00, 0x00, 0x10, 0x00, 0xb8, 0x00, 0x00, +0x0f, 0x00, 0xe8, 0x4a, 0xff, 0xff, 0xff, 0x31, 0xd2, 0x85, 0xc0, 0x74, 0x0f, 0xc7, 0x43, 0x24, +0x01, 0x00, 0x00, 0x00, 0x89, 0x43, 0x28, 0xba, 0x01, 0x00, 0x00, 0x00, 0x89, 0xd0, 0x5b, 0xc9, +0xc3, 0x55, 0x89, 0xe5, 0x56, 0x53, 0x68, 0x00, 0x10, 0x00, 0x00, 0x8b, 0x75, 0x08, 0x6a, 0x00, +0xff, 0x76, 0x10, 0xe8, 0xf7, 0xfc, 0xff, 0xff, 0x8b, 0x46, 0x10, 0xc6, 0x00, 0x00, 0x8b, 0x46, +0x10, 0xc6, 0x40, 0x01, 0x19, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x06, 0x00, 0x66, 0xc7, 0x40, 0x04, +0x00, 0x00, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x07, 0x50, 0x8b, 0x46, 0x10, 0xc6, 0x40, 0x0e, 0x19, +0x8b, 0x46, 0x10, 0xc6, 0x40, 0x0f, 0x01, 0x66, 0xc7, 0x40, 0x0a, 0x00, 0x00, 0x8b, 0x46, 0x10, +0xc6, 0x80, 0xe8, 0x01, 0x00, 0x00, 0x00, 0x66, 0xc7, 0x40, 0x10, 0x10, 0x00, 0x66, 0xc7, 0x40, +0x02, 0x00, 0x00, 0x8b, 0x46, 0x10, 0x8d, 0x90, 0x00, 0x08, 0x00, 0x00, 0x89, 0x90, 0x28, 0x02, +0x00, 0x00, 0x66, 0xc7, 0x40, 0x20, 0x3f, 0xa3, 0x66, 0xc7, 0x40, 0x22, 0x00, 0x08, 0x68, 0xff, +0x00, 0x00, 0x00, 0x8b, 0x46, 0x0c, 0x83, 0xc0, 0x1c, 0x50, 0xe8, 0x66, 0xfc, 0xff, 0xff, 0x50, +0x89, 0xc3, 0x8b, 0x46, 0x0c, 0x83, 0xc0, 0x1c, 0x50, 0x8b, 0x46, 0x10, 0x05, 0x00, 0x08, 0x00, +0x00, 0x50, 0xe8, 0x84, 0xfc, 0xff, 0xff, 0x83, 0xc4, 0x20, 0x8b, 0x46, 0x10, 0xc6, 0x84, 0x03, +0x00, 0x08, 0x00, 0x00, 0x00, 0x6a, 0x40, 0x6a, 0x00, 0x8b, 0x46, 0x10, 0x83, 0xc0, 0x40, 0x50, +0xe8, 0x4a, 0xfc, 0xff, 0xff, 0x6a, 0x20, 0x6a, 0x00, 0x8b, 0x46, 0x10, 0x83, 0xe8, 0x80, 0x50, +0xe8, 0x3a, 0xfc, 0xff, 0xff, 0x8b, 0x46, 0x10, 0x8b, 0x4e, 0x0c, 0x66, 0xc7, 0x80, 0xa0, 0x00, +0x00, 0x00, 0x00, 0x00, 0x66, 0xc7, 0x40, 0x02, 0x00, 0x00, 0x66, 0xc7, 0x80, 0xf2, 0x01, 0x00, +0x00, 0xff, 0xff, 0x66, 0x8b, 0x51, 0x0c, 0x66, 0x89, 0x90, 0xf8, 0x01, 0x00, 0x00, 0x66, 0x8b, +0x51, 0x0e, 0x66, 0x89, 0x90, 0xfc, 0x01, 0x00, 0x00, 0xc7, 0x80, 0xe0, 0x01, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xc6, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x6a, 0x04, 0x68, 0x59, 0x0f, 0x01, +0x00, 0x8b, 0x46, 0x10, 0x05, 0x02, 0x02, 0x00, 0x00, 0x50, 0xe8, 0xfc, 0xfb, 0xff, 0xff, 0x8b, +0x46, 0x10, 0xc6, 0x80, 0x10, 0x02, 0x00, 0x00, 0x50, 0x66, 0xc7, 0x80, 0x06, 0x02, 0x00, 0x00, +0x01, 0x02, 0x8b, 0x46, 0x10, 0xc6, 0x80, 0x11, 0x02, 0x00, 0x00, 0x00, 0x8b, 0x4e, 0x10, 0xc7, +0x81, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x81, 0x1c, 0x02, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x8b, 0x56, 0x0c, 0x83, 0xc4, 0x24, 0x83, 0x7a, 0x18, 0x00, 0x74, 0x12, 0x8b, +0x42, 0x14, 0x89, 0x81, 0x18, 0x02, 0x00, 0x00, 0x8b, 0x42, 0x18, 0x89, 0x81, 0x1c, 0x02, 0x00, +0x00, 0xc7, 0x46, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x8d, 0x65, 0xf8, 0x5b, 0x5e, 0xc9, 0xc3, 0x55, +0x89, 0xe5, 0x57, 0x56, 0x53, 0x83, 0xec, 0x60, 0xa1, 0x90, 0x10, 0x01, 0x00, 0x89, 0x45, 0xd4, +0x8b, 0x45, 0x08, 0x89, 0x45, 0xc4, 0x8b, 0x45, 0x0c, 0x89, 0x45, 0xc8, 0x8b, 0x45, 0x10, 0x89, +0x45, 0xcc, 0x8b, 0x45, 0x14, 0x89, 0x45, 0xd0, 0x8d, 0x45, 0xc4, 0x50, 0xe8, 0x40, 0xfe, 0xff, +0xff, 0x58, 0x8b, 0x45, 0xc4, 0x31, 0xdb, 0x31, 0xf6, 0x3d, 0x02, 0xb0, 0xad, 0x2b, 0x75, 0x0b, +0xb3, 0x01, 0xc7, 0x45, 0xd8, 0x01, 0x00, 0x00, 0x00, 0xeb, 0x2e, 0x3d, 0x07, 0xb0, 0x11, 0x0a, +0x75, 0x27, 0x8b, 0x45, 0xc8, 0x8b, 0x10, 0xe8, 0x95, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x0e, +0xbb, 0x01, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xdc, 0x01, 0x00, 0x00, 0x00, 0xeb, 0x0b, 0x68, 0x5e, +0x0f, 0x01, 0x00, 0xe8, 0x6f, 0xf9, 0xff, 0xff, 0x5f, 0x81, 0x7d, 0xc4, 0x07, 0xb0, 0x1f, 0x0e, +0x75, 0x03, 0x8b, 0x75, 0xc8, 0x8b, 0x45, 0xcc, 0x85, 0xc0, 0x74, 0x0a, 0x81, 0x38, 0x07, 0xb0, +0x1f, 0x0e, 0x75, 0x02, 0x89, 0xc6, 0x85, 0xdb, 0x0f, 0x85, 0x11, 0x01, 0x00, 0x00, 0x85, 0xf6, +0x0f, 0x84, 0xd1, 0x00, 0x00, 0x00, 0x66, 0x83, 0x7e, 0x08, 0x00, 0xc7, 0x45, 0xc0, 0x00, 0x00, +0x00, 0x00, 0x74, 0x0d, 0x8b, 0x56, 0x04, 0x89, 0xf0, 0xe8, 0x33, 0xfb, 0xff, 0xff, 0x89, 0x45, +0xc0, 0x89, 0xf3, 0x31, 0xff, 0x8d, 0x4e, 0x0c, 0x03, 0x5e, 0x04, 0x39, 0xd9, 0x73, 0x21, 0x8b, +0x01, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x54, 0x01, 0x0c, 0x8b, 0x41, 0x04, 0x83, 0xc0, +0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x04, 0x02, 0x39, 0xd8, 0x77, 0x05, 0x47, 0x89, 0xc1, 0xeb, 0xdb, +0x81, 0x3e, 0x07, 0xb0, 0x1f, 0x0e, 0x75, 0x1d, 0x83, 0x7d, 0xc0, 0x00, 0x75, 0x17, 0x0f, 0xb7, +0x46, 0x0a, 0x39, 0xf8, 0x75, 0x0f, 0xc7, 0x45, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x89, 0x75, 0xcc, +0xe9, 0x9a, 0x00, 0x00, 0x00, 0x68, 0x81, 0x0f, 0x01, 0x00, 0xe8, 0xc8, 0xf8, 0xff, 0xff, 0x59, +0xff, 0x75, 0xc0, 0x68, 0x9b, 0x0f, 0x01, 0x00, 0xe8, 0xba, 0xf8, 0xff, 0xff, 0x58, 0x5a, 0x57, +0x68, 0xad, 0x0f, 0x01, 0x00, 0xe8, 0xad, 0xf8, 0xff, 0xff, 0x5f, 0x58, 0x56, 0x68, 0xbf, 0x0f, +0x01, 0x00, 0xe8, 0xa0, 0xf8, 0xff, 0xff, 0x59, 0x5b, 0xff, 0x76, 0x04, 0x68, 0xd1, 0x0f, 0x01, +0x00, 0xe8, 0x91, 0xf8, 0xff, 0xff, 0x58, 0x5a, 0xff, 0x36, 0x68, 0xe3, 0x0f, 0x01, 0x00, 0xe8, +0x83, 0xf8, 0xff, 0xff, 0x5f, 0x58, 0x0f, 0xb7, 0x46, 0x0a, 0x50, 0x68, 0xf5, 0x0f, 0x01, 0x00, +0xe8, 0x72, 0xf8, 0xff, 0xff, 0x5b, 0x5e, 0x68, 0x07, 0x10, 0x01, 0x00, 0xe8, 0x66, 0xf8, 0xff, +0xff, 0x59, 0xff, 0x75, 0xc4, 0x68, 0x22, 0x10, 0x01, 0x00, 0xe8, 0x58, 0xf8, 0xff, 0xff, 0x58, +0x5a, 0xff, 0x75, 0xc8, 0x68, 0x2b, 0x10, 0x01, 0x00, 0xe8, 0x49, 0xf8, 0xff, 0xff, 0x5e, 0x5f, +0xff, 0x75, 0xcc, 0x68, 0x34, 0x10, 0x01, 0x00, 0xe8, 0x3a, 0xf8, 0xff, 0xff, 0x59, 0x5b, 0x31, +0xc0, 0x83, 0x7d, 0xe0, 0x00, 0xc7, 0x45, 0xe4, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xe8, 0x00, +0x00, 0x00, 0x00, 0x0f, 0x84, 0x22, 0x01, 0x00, 0x00, 0x8b, 0x45, 0xcc, 0x89, 0xc6, 0xc7, 0x45, +0xb8, 0x00, 0x00, 0x00, 0x00, 0xc7, 0x45, 0xbc, 0x00, 0x00, 0x00, 0x00, 0x8d, 0x58, 0x0c, 0x03, +0x70, 0x04, 0x39, 0xf3, 0x73, 0x41, 0x8b, 0x0b, 0x8d, 0x51, 0x03, 0x8b, 0x43, 0x04, 0x83, 0xe2, +0xfc, 0x83, 0xc0, 0x03, 0x8d, 0x7b, 0x0c, 0x83, 0xe0, 0xfc, 0x8d, 0x14, 0x17, 0x8d, 0x04, 0x02, +0x39, 0xf0, 0x89, 0x45, 0xb4, 0x77, 0x20, 0x83, 0x7b, 0x08, 0x01, 0x75, 0x15, 0x85, 0xc9, 0x75, +0x11, 0x6a, 0x00, 0x6a, 0x00, 0x57, 0xe8, 0xa3, 0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, +0x74, 0x09, 0x8b, 0x5d, 0xb4, 0xeb, 0xbb, 0x31, 0xdb, 0xeb, 0x04, 0x85, 0xdb, 0x75, 0x09, 0xc7, +0x45, 0xb8, 0x00, 0x00, 0x00, 0x00, 0xeb, 0x0e, 0x8b, 0x03, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, +0x8d, 0x04, 0x07, 0x89, 0x45, 0xbc, 0x85, 0xdb, 0x0f, 0x84, 0x9a, 0x00, 0x00, 0x00, 0x83, 0x7b, +0x04, 0x07, 0x75, 0x1f, 0x6a, 0x07, 0x68, 0x74, 0x10, 0x01, 0x00, 0xff, 0x75, 0xbc, 0xe8, 0x5b, +0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x09, 0xc7, 0x45, 0xe4, 0x01, 0x00, 0x00, +0x00, 0xeb, 0x59, 0x85, 0xdb, 0x74, 0x71, 0x83, 0x7b, 0x04, 0x0a, 0x75, 0x25, 0x6a, 0x0a, 0x68, +0x69, 0x10, 0x01, 0x00, 0xff, 0x75, 0xbc, 0xe8, 0x32, 0xf9, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, +0xc0, 0x75, 0x0f, 0x8d, 0x45, 0xc4, 0xe8, 0x97, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x89, 0x45, 0xb8, +0x75, 0x46, 0x85, 0xdb, 0x74, 0x42, 0x83, 0x7b, 0x04, 0x00, 0x74, 0x20, 0x85, 0xdb, 0x74, 0x38, +0x83, 0x7b, 0x04, 0x01, 0x75, 0x1f, 0x6a, 0x01, 0x68, 0x9a, 0x0f, 0x01, 0x00, 0xff, 0x75, 0xbc, +0xe8, 0xf9, 0xf8, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x09, 0xc7, 0x45, 0xb8, 0x01, +0x00, 0x00, 0x00, 0xeb, 0x13, 0x85, 0xdb, 0x74, 0x0f, 0xff, 0x75, 0xbc, 0x68, 0x3e, 0x10, 0x01, +0x00, 0xe8, 0x01, 0xf7, 0xff, 0xff, 0x58, 0x5a, 0x8b, 0x45, 0xb8, 0x85, 0xc0, 0x75, 0x13, 0x8d, +0x45, 0xc4, 0xe8, 0x3b, 0xfb, 0xff, 0xff, 0x85, 0xc0, 0x75, 0x07, 0xc7, 0x45, 0xe4, 0x01, 0x00, +0x00, 0x00, 0x68, 0x59, 0x10, 0x01, 0x00, 0xe8, 0xdb, 0xf6, 0xff, 0xff, 0x83, 0x7d, 0xe8, 0x00, +0x5f, 0x74, 0x0b, 0x68, 0x68, 0x10, 0x01, 0x00, 0xe8, 0xca, 0xf6, 0xff, 0xff, 0x5e, 0x83, 0x7d, +0xe4, 0x00, 0x74, 0x0b, 0x68, 0x73, 0x10, 0x01, 0x00, 0xe8, 0xb9, 0xf6, 0xff, 0xff, 0x5b, 0x68, +0x99, 0x0f, 0x01, 0x00, 0xe8, 0xae, 0xf6, 0xff, 0xff, 0x83, 0x7d, 0xe8, 0x00, 0x59, 0x0f, 0x84, +0x84, 0x00, 0x00, 0x00, 0x8b, 0x45, 0xec, 0x8d, 0x50, 0x18, 0x8b, 0x40, 0x0c, 0x01, 0xd0, 0x39, +0xc2, 0x89, 0x45, 0xb0, 0x89, 0xd3, 0x73, 0x70, 0x29, 0xd8, 0x8b, 0x53, 0x04, 0x39, 0xc2, 0x77, +0x67, 0x83, 0x3b, 0x01, 0x75, 0x55, 0x8d, 0x42, 0xf8, 0xba, 0x14, 0x00, 0x00, 0x00, 0x89, 0xd1, +0x31, 0xd2, 0xf7, 0xf1, 0x31, 0xff, 0x39, 0xc7, 0x89, 0x45, 0xac, 0x7d, 0x37, 0x31, 0xf6, 0x31, +0xd2, 0x83, 0x7c, 0x1e, 0x18, 0x01, 0x0f, 0x95, 0xc2, 0x42, 0x52, 0xff, 0x74, 0x1e, 0x14, 0xff, +0x74, 0x1e, 0x10, 0xff, 0x74, 0x1e, 0x0c, 0xff, 0x74, 0x1e, 0x08, 0x8b, 0x45, 0xd4, 0x47, 0xe8, +0x41, 0xf9, 0xff, 0xff, 0x83, 0xc6, 0x14, 0x83, 0xc4, 0x14, 0x3b, 0x7d, 0xac, 0x7d, 0x05, 0x83, +0xff, 0x1f, 0x7e, 0xcb, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x03, 0x5b, 0x04, 0x3b, 0x5d, +0xb0, 0x73, 0x05, 0x8b, 0x45, 0xb0, 0xeb, 0x90, 0x83, 0x7d, 0xe4, 0x00, 0x0f, 0x84, 0x94, 0x00, +0x00, 0x00, 0x6a, 0x20, 0x68, 0xc4, 0x51, 0x01, 0x00, 0xe8, 0xee, 0xf3, 0xff, 0xff, 0x31, 0xf6, +0x5f, 0x39, 0xc6, 0x5a, 0xa3, 0xc0, 0x51, 0x01, 0x00, 0x7d, 0x47, 0x31, 0xdb, 0x83, 0xbb, 0xd4, +0x51, 0x01, 0x00, 0x01, 0x75, 0x07, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0xff, 0xb3, 0xd4, +0x51, 0x01, 0x00, 0xff, 0xb3, 0xd0, 0x51, 0x01, 0x00, 0xff, 0xb3, 0xcc, 0x51, 0x01, 0x00, 0xff, +0xb3, 0xc8, 0x51, 0x01, 0x00, 0xff, 0xb3, 0xc4, 0x51, 0x01, 0x00, 0x8b, 0x45, 0xd4, 0x46, 0xe8, +0xc1, 0xf8, 0xff, 0xff, 0x83, 0xc3, 0x14, 0x83, 0xc4, 0x14, 0x3b, 0x35, 0xc0, 0x51, 0x01, 0x00, +0x7c, 0xbb, 0x8b, 0x5d, 0xd4, 0xe8, 0xeb, 0xf3, 0xff, 0xff, 0x89, 0x83, 0xe0, 0x01, 0x00, 0x00, +0x8b, 0x5d, 0xd4, 0xe8, 0x26, 0xf4, 0xff, 0xff, 0x66, 0x89, 0x43, 0x02, 0x8b, 0x45, 0xd4, 0x83, +0xb8, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x75, 0x07, 0x66, 0x83, 0x78, 0x02, 0x00, 0x74, 0x07, 0xc7, +0x45, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x83, 0x7d, 0xd8, 0x00, 0x0f, 0x84, 0x8a, 0x00, 0x00, 0x00, +0x83, 0x7d, 0xf0, 0x00, 0x8b, 0x75, 0xc8, 0x74, 0x16, 0xf6, 0x06, 0x01, 0x74, 0x11, 0x8b, 0x56, +0x08, 0x81, 0xc2, 0x00, 0x04, 0x00, 0x00, 0x8b, 0x45, 0xd4, 0xe8, 0x0b, 0xf8, 0xff, 0xff, 0xf6, +0x06, 0x04, 0x74, 0x10, 0x6a, 0xff, 0xff, 0x76, 0x10, 0xff, 0x75, 0xd4, 0xe8, 0x9f, 0xf7, 0xff, +0xff, 0x83, 0xc4, 0x0c, 0x83, 0x7d, 0xf0, 0x00, 0x74, 0x3b, 0xf6, 0x06, 0x40, 0x74, 0x36, 0x8b, +0x5e, 0x30, 0x8b, 0x45, 0xd4, 0x89, 0xdf, 0x8b, 0x4b, 0xfc, 0x89, 0x45, 0xa8, 0x03, 0x7e, 0x2c, +0x89, 0x4d, 0xa4, 0x39, 0xfb, 0x73, 0x1e, 0xff, 0x73, 0x10, 0xff, 0x73, 0x0c, 0xff, 0x73, 0x08, +0xff, 0x73, 0x04, 0xff, 0x33, 0x8b, 0x45, 0xa8, 0xe8, 0x08, 0xf8, 0xff, 0xff, 0x83, 0xc4, 0x14, +0x03, 0x5d, 0xa4, 0xeb, 0xde, 0xf6, 0x06, 0x41, 0x0f, 0x84, 0x51, 0x01, 0x00, 0x00, 0xc7, 0x45, +0xf0, 0x00, 0x00, 0x00, 0x00, 0xe9, 0x45, 0x01, 0x00, 0x00, 0x83, 0x7d, 0xdc, 0x00, 0x0f, 0x84, +0xc9, 0x00, 0x00, 0x00, 0x8b, 0x5d, 0xc8, 0x8b, 0x43, 0x0c, 0x85, 0xc0, 0x74, 0x0f, 0x50, 0xff, +0x73, 0x08, 0xff, 0x75, 0xd4, 0xe8, 0x26, 0xf7, 0xff, 0xff, 0x83, 0xc4, 0x0c, 0x8b, 0x7b, 0x14, +0x8b, 0x73, 0x10, 0x85, 0xff, 0x0f, 0x84, 0x14, 0x01, 0x00, 0x00, 0x83, 0x3e, 0x01, 0x0f, 0x85, +0x8d, 0x00, 0x00, 0x00, 0x83, 0x7d, 0xf0, 0x00, 0x0f, 0x84, 0x83, 0x00, 0x00, 0x00, 0x8b, 0x45, +0xd4, 0xba, 0x14, 0x00, 0x00, 0x00, 0x89, 0x45, 0xa0, 0x8b, 0x46, 0x04, 0x83, 0xe8, 0x08, 0x89, +0xd1, 0x31, 0xd2, 0xf7, 0xf1, 0xc7, 0x45, 0x9c, 0x00, 0x00, 0x00, 0x00, 0x39, 0x45, 0x9c, 0x89, +0x45, 0x98, 0x7d, 0x56, 0x31, 0xdb, 0x8b, 0x44, 0x33, 0x18, 0x83, 0xf8, 0x03, 0xba, 0x03, 0x00, +0x00, 0x00, 0x74, 0x16, 0x77, 0x05, 0xb2, 0x01, 0x48, 0xeb, 0x08, 0xba, 0x04, 0x00, 0x00, 0x00, +0x83, 0xf8, 0x04, 0x74, 0x05, 0xba, 0x02, 0x00, 0x00, 0x00, 0x52, 0xff, 0x74, 0x33, 0x14, 0xff, +0x74, 0x33, 0x10, 0xff, 0x74, 0x33, 0x0c, 0xff, 0x74, 0x33, 0x08, 0x8b, 0x45, 0xa0, 0xe8, 0x42, +0xf7, 0xff, 0xff, 0xff, 0x45, 0x9c, 0x8b, 0x45, 0x98, 0x83, 0xc4, 0x14, 0x83, 0xc3, 0x14, 0x39, +0x45, 0x9c, 0x7d, 0x06, 0x83, 0x7d, 0x9c, 0x1f, 0x7e, 0xac, 0xc7, 0x45, 0xf0, 0x00, 0x00, 0x00, +0x00, 0x8b, 0x46, 0x04, 0x01, 0xc6, 0x29, 0xc7, 0xe9, 0x58, 0xff, 0xff, 0xff, 0x83, 0x7d, 0xe0, +0x00, 0x74, 0x6c, 0x8b, 0x45, 0xcc, 0x89, 0xc6, 0x8d, 0x58, 0x0c, 0x03, 0x70, 0x04, 0x39, 0xf3, +0x73, 0x5d, 0x8b, 0x13, 0x8d, 0x42, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x4b, 0x0c, 0x8d, 0x3c, 0x01, +0x8b, 0x43, 0x04, 0x83, 0xc0, 0x03, 0x83, 0xe0, 0xfc, 0x8d, 0x04, 0x07, 0x39, 0xf0, 0x89, 0x45, +0x94, 0x77, 0x3c, 0xa1, 0x84, 0x10, 0x01, 0x00, 0x39, 0x43, 0x08, 0x75, 0x2d, 0x3b, 0x15, 0x7c, +0x10, 0x01, 0x00, 0x75, 0x25, 0x52, 0xff, 0x35, 0x80, 0x10, 0x01, 0x00, 0x51, 0xe8, 0x9c, 0xf5, +0xff, 0xff, 0x83, 0xc4, 0x0c, 0x85, 0xc0, 0x75, 0x11, 0x57, 0xff, 0x73, 0x04, 0x8d, 0x4d, 0xc4, +0x51, 0xff, 0x15, 0x88, 0x10, 0x01, 0x00, 0x83, 0xc4, 0x0c, 0x8b, 0x5d, 0x94, 0xeb, 0x9f, 0xb0, +0x80, 0xe6, 0x70, 0x31, 0xc0, 0xe6, 0xf0, 0xe6, 0xf1, 0xb0, 0x11, 0xe6, 0x20, 0xe6, 0xa0, 0xb0, +0x20, 0xe6, 0x21, 0xb0, 0x28, 0xe6, 0xa1, 0xb0, 0x04, 0xe6, 0x21, 0xb0, 0x02, 0xe6, 0xa1, 0xb0, +0x01, 0xe6, 0x21, 0xe6, 0xa1, 0xb0, 0xff, 0xe6, 0xa1, 0xb0, 0xfb, 0xe6, 0x21, 0x8b, 0x45, 0xd4, +0x8d, 0x65, 0xf4, 0x5b, 0x5e, 0x5f, 0xc9, 0xc3, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, +0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x00, 0x48, 0x64, 0x72, 0x53, 0x00, 0x42, 0x61, +0x64, 0x20, 0x75, 0x6e, 0x69, 0x66, 0x6f, 0x72, 0x6d, 0x20, 0x62, 0x6f, 0x6f, 0x74, 0x20, 0x68, +0x65, 0x61, 0x64, 0x65, 0x72, 0x20, 0x63, 0x68, 0x65, 0x63, 0x6b, 0x73, 0x75, 0x6d, 0x21, 0x0a, +0x00, 0x42, 0x61, 0x64, 0x20, 0x45, 0x4c, 0x46, 0x20, 0x70, 0x61, 0x72, 0x61, 0x6d, 0x65, 0x74, +0x65, 0x72, 0x20, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x21, 0x0a, 0x00, 0x20, 0x20, 0x20, 0x63, 0x68, +0x65, 0x63, 0x6b, 0x73, 0x75, 0x6d, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, 0x20, 0x20, +0x20, 0x20, 0x20, 0x63, 0x6f, 0x75, 0x6e, 0x74, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, +0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x68, 0x64, 0x72, 0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, +0x00, 0x20, 0x20, 0x20, 0x20, 0x20, 0x62, 0x5f, 0x73, 0x69, 0x7a, 0x65, 0x20, 0x3d, 0x20, 0x25, +0x78, 0x0a, 0x00, 0x62, 0x5f, 0x73, 0x69, 0x67, 0x6e, 0x61, 0x74, 0x75, 0x72, 0x65, 0x20, 0x3d, +0x20, 0x25, 0x78, 0x0a, 0x00, 0x20, 0x20, 0x62, 0x5f, 0x72, 0x65, 0x63, 0x6f, 0x72, 0x64, 0x73, +0x20, 0x3d, 0x20, 0x25, 0x78, 0x0a, 0x00, 0x55, 0x6e, 0x6b, 0x6e, 0x6f, 0x77, 0x6e, 0x20, 0x62, +0x6f, 0x6f, 0x74, 0x6c, 0x6f, 0x61, 0x64, 0x65, 0x72, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x21, +0x0a, 0x00, 0x74, 0x79, 0x70, 0x65, 0x3d, 0x25, 0x78, 0x0a, 0x00, 0x64, 0x61, 0x74, 0x61, 0x3d, +0x25, 0x78, 0x0a, 0x00, 0x70, 0x61, 0x72, 0x61, 0x6d, 0x3d, 0x25, 0x78, 0x0a, 0x00, 0x55, 0x6e, +0x6b, 0x6e, 0x6f, 0x77, 0x6e, 0x20, 0x66, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, 0x65, 0x20, 0x74, +0x79, 0x70, 0x65, 0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x46, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, +0x65, 0x20, 0x74, 0x79, 0x70, 0x65, 0x3a, 0x00, 0x20, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x42, 0x49, +0x4f, 0x53, 0x00, 0x20, 0x50, 0x43, 0x42, 0x49, 0x4f, 0x53, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x9a, 0x0f, 0x01, 0x00, 0x04, 0x00, 0x00, 0x00, 0x53, 0x06, 0x01, 0x00, 0xc0, 0x51, 0x01, 0x00, +0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xa5, 0xa5, 0xa5, 0xa5, 0x70, 0x00, 0x00, 0x00, 0xa8, 0x10, 0x01, 0x00, 0x00, 0x00, 0x00, 0x03, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x4f, 0x4f, 0x54, +0x5f, 0x49, 0x4d, 0x41, 0x47, 0x45, 0x3d, 0x68, 0x65, 0x61, 0x64, 0x2e, 0x53, 0x20, 0x63, 0x6f, +0x6e, 0x73, 0x6f, 0x6c, 0x65, 0x3d, 0x74, 0x74, 0x79, 0x53, 0x30, 0x20, 0x69, 0x70, 0x3d, 0x64, +0x68, 0x63, 0x70, 0x20, 0x72, 0x6f, 0x6f, 0x74, 0x3d, 0x2f, 0x64, 0x65, 0x76, 0x2f, 0x6e, 0x66, +0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, Added: trunk/util/mkelfImage/linux-i386/convert.h =================================================================== --- trunk/util/mkelfImage/linux-i386/convert.h (rev 0) +++ trunk/util/mkelfImage/linux-i386/convert.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,29 @@ + +/* Hard coded locations */ +#define CONVERTLOC 0x10000 +#define REAL_MODE_DATA_LOC 0x20000 +#define GDTLOC 0x21000 + +#define DEFAULT_ROOT_DEV ((0x3<<8)| 0) + +#define CMDLINE_MAX 256 + +#ifdef ASSEMBLY +#define CONVERT_MAGIC 0xA5A5A5A5 +#else +#define CONVERT_MAGIC 0xA5A5A5A5UL +#endif + +#ifndef ASSEMBLY +struct image_parameters { + uint32_t convert_magic; /* a signature to verify mkelfImage was built properly */ + uint32_t gdt_size; + uint32_t bss_size; + uint16_t ramdisk_flags; + uint16_t root_dev; + uint32_t entry; + uint32_t initrd_start; + uint32_t initrd_size; + uint8_t cmdline[CMDLINE_MAX]; +}; +#endif Added: trunk/util/mkelfImage/linux-i386/convert.lds =================================================================== --- trunk/util/mkelfImage/linux-i386/convert.lds (rev 0) +++ trunk/util/mkelfImage/linux-i386/convert.lds 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,36 @@ +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) + + +ENTRY(startup_32) +SECTIONS +{ + . = 0x10000; + _text = .; /* Text and read-only data */ + .text . : { + *(.text) + *(.text.*) + } = 0x9090 + .rodata (.): { + *(.rodata) + *(.rodata.*) + } + _etext = .; /* End of text section */ + .data (.): { /* Data */ + *(.data) + *(.data.*) + *(.trailer) + } + _edata = .; /* End of data section */ + _bss = .; /* BSS */ + .bss (.): { + *(.bss) + } + _end = . ; + bss_size = _end - _bss; + + /DISCARD/ : { + *(.comment) + *(.note) + } +} Added: trunk/util/mkelfImage/linux-i386/convert_params.c =================================================================== --- trunk/util/mkelfImage/linux-i386/convert_params.c (rev 0) +++ trunk/util/mkelfImage/linux-i386/convert_params.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,1555 @@ +#include <stdarg.h> +#include <limits.h> +#include "arch/io.h" +#include "stdint.h" +#include "uniform_boot.h" +#include "linuxbios_tables.h" +#include "elf_boot.h" +#include "convert.h" +#define STACK_SIZE (4096) + +#define __unused __attribute__ ((unused)) + +long user_stack [STACK_SIZE] = { 0 }; + +unsigned long * stack_start = & user_stack[STACK_SIZE]; + +/* FIXME expand on drive_info_)struct... */ +struct drive_info_struct { + uint8_t dummy[32]; +}; +struct sys_desc_table { + uint16_t length; + uint8_t table[318]; +}; + +/* + * These are set up by the setup-routine at boot-time: + */ + +struct screen_info { + uint8_t orig_x; /* 0x00 */ + uint8_t orig_y; /* 0x01 */ + uint16_t dontuse1; /* 0x02 -- EXT_MEM_K sits here */ + uint16_t orig_video_page; /* 0x04 */ + uint8_t orig_video_mode; /* 0x06 */ + uint8_t orig_video_cols; /* 0x07 */ + uint16_t unused2; /* 0x08 */ + uint16_t orig_video_ega_bx; /* 0x0a */ + uint16_t unused3; /* 0x0c */ + uint8_t orig_video_lines; /* 0x0e */ + uint8_t orig_video_isVGA; /* 0x0f */ + uint16_t orig_video_points; /* 0x10 */ + + /* VESA graphic mode -- linear frame buffer */ + uint16_t lfb_width; /* 0x12 */ + uint16_t lfb_height; /* 0x14 */ + uint16_t lfb_depth; /* 0x16 */ + uint32_t lfb_base; /* 0x18 */ + uint32_t lfb_size; /* 0x1c */ + uint16_t dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */ + uint16_t lfb_linelength; /* 0x24 */ + uint8_t red_size; /* 0x26 */ + uint8_t red_pos; /* 0x27 */ + uint8_t green_size; /* 0x28 */ + uint8_t green_pos; /* 0x29 */ + uint8_t blue_size; /* 0x2a */ + uint8_t blue_pos; /* 0x2b */ + uint8_t rsvd_size; /* 0x2c */ + uint8_t rsvd_pos; /* 0x2d */ + uint16_t vesapm_seg; /* 0x2e */ + uint16_t vesapm_off; /* 0x30 */ + uint16_t pages; /* 0x32 */ +}; + + +#define PAGE_SIZE 4096 + + +#define E820MAP 0x2d0 /* our map */ +#define E820MAX 32 /* number of entries in E820MAP */ +#define E820NR 0x1e8 /* # entries in E820MAP */ + + +struct e820entry { + unsigned long long addr; /* start of memory segment */ + unsigned long long size; /* size of memory segment */ + unsigned long type; /* type of memory segment */ +#define E820_RAM 1 +#define E820_RESERVED 2 +#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ +#define E820_NVS 4 +}; + +struct e820map { + int nr_map; + struct e820entry map[E820MAX]; +}; + + +struct apm_bios_info { + uint16_t version; /* 0x40 */ + uint16_t cseg; /* 0x42 */ + uint32_t offset; /* 0x44 */ + uint16_t cseg_16; /* 0x48 */ + uint16_t dseg; /* 0x4a */ + uint16_t flags; /* 0x4c */ + uint16_t cseg_len; /* 0x4e */ + uint16_t cseg_16_len; /* 0x50 */ + uint16_t dseg_len; /* 0x52 */ + uint8_t reserved[44]; /* 0x54 */ +}; + + +struct parameters { + uint8_t orig_x; /* 0x00 */ + uint8_t orig_y; /* 0x01 */ + uint16_t ext_mem_k; /* 0x02 -- EXT_MEM_K sits here */ + uint16_t orig_video_page; /* 0x04 */ + uint8_t orig_video_mode; /* 0x06 */ + uint8_t orig_video_cols; /* 0x07 */ + uint16_t unused2; /* 0x08 */ + uint16_t orig_video_ega_bx; /* 0x0a */ + uint16_t unused3; /* 0x0c */ + uint8_t orig_video_lines; /* 0x0e */ + uint8_t orig_video_isVGA; /* 0x0f */ + uint16_t orig_video_points; /* 0x10 */ + + /* VESA graphic mode -- linear frame buffer */ + uint16_t lfb_width; /* 0x12 */ + uint16_t lfb_height; /* 0x14 */ + uint16_t lfb_depth; /* 0x16 */ + uint32_t lfb_base; /* 0x18 */ + uint32_t lfb_size; /* 0x1c */ + uint16_t cl_magic; /* 0x20 */ +#define CL_MAGIC_VALUE 0xA33F + uint16_t cl_offset; /* 0x22 */ + uint16_t lfb_linelength; /* 0x24 */ + uint8_t red_size; /* 0x26 */ + uint8_t red_pos; /* 0x27 */ + uint8_t green_size; /* 0x28 */ + uint8_t green_pos; /* 0x29 */ + uint8_t blue_size; /* 0x2a */ + uint8_t blue_pos; /* 0x2b */ + uint8_t rsvd_size; /* 0x2c */ + uint8_t rsvd_pos; /* 0x2d */ + uint16_t vesapm_seg; /* 0x2e */ + uint16_t vesapm_off; /* 0x30 */ + uint16_t pages; /* 0x32 */ + uint8_t reserved4[12]; /* 0x34 -- 0x3f reserved for future expansion */ + + struct apm_bios_info apm_bios_info; /* 0x40 */ + struct drive_info_struct drive_info; /* 0x80 */ + struct sys_desc_table sys_desc_table; /* 0xa0 */ + uint32_t alt_mem_k; /* 0x1e0 */ + uint8_t reserved5[4]; /* 0x1e4 */ + uint8_t e820_map_nr; /* 0x1e8 */ + uint8_t reserved6[9]; /* 0x1e9 */ + uint16_t mount_root_rdonly; /* 0x1f2 */ + uint8_t reserved7[4]; /* 0x1f4 */ + uint16_t ramdisk_flags; /* 0x1f8 */ +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + uint8_t reserved8[2]; /* 0x1fa */ + uint16_t orig_root_dev; /* 0x1fc */ + uint8_t reserved9[1]; /* 0x1fe */ + uint8_t aux_device_info; /* 0x1ff */ + uint8_t reserved10[2]; /* 0x200 */ + uint8_t param_block_signature[4]; /* 0x202 */ + uint16_t param_block_version; /* 0x206 */ + uint8_t reserved11[8]; /* 0x208 */ + uint8_t loader_type; /* 0x210 */ +#define LOADER_TYPE_LOADLIN 1 +#define LOADER_TYPE_BOOTSECT_LOADER 2 +#define LOADER_TYPE_SYSLINUX 3 +#define LOADER_TYPE_ETHERBOOT 4 +#define LOADER_TYPE_KERNEL 5 + uint8_t loader_flags; /* 0x211 */ + uint8_t reserved12[2]; /* 0x212 */ + uint32_t kernel_start; /* 0x214 */ + uint32_t initrd_start; /* 0x218 */ + uint32_t initrd_size; /* 0x21c */ + uint8_t reserved13[4]; /* 0x220 */ + /* 2.01+ */ + uint16_t heap_end_ptr; /* 0x224 */ + uint8_t reserved14[2]; /* 0x226 */ + /* 2.02+ */ + uint32_t cmd_line_ptr; /* 0x228 */ + /* 2.03+ */ + uint32_t initrd_addr_max; /* 0x22c */ + uint8_t reserved15[0x2d0 - 0x230]; /* 0x230 */ + + struct e820entry e820_map[E820MAX]; /* 0x2d0 */ + uint8_t reserved16[688]; /* 0x550 */ +#define COMMAND_LINE_SIZE 256 + uint8_t command_line[COMMAND_LINE_SIZE]; /* 0x800 */ + uint8_t reserved17[1792]; /* 0x900 - 0x1000 */ +}; + +/* Keep track of which information I need to acquire. */ +struct param_info { + unsigned type; + void *data; + Elf_Bhdr *param; + struct image_parameters *image; + struct parameters *real_mode; + /* bootloader type */ + int has_multiboot; + int has_uniform_boot; + int has_elf_boot; + /* firmware type */ + int has_pcbios; + int has_linuxbios; + struct lb_header *lb_table; + /* machine information needed */ + int need_mem_sizes; +}; +/* + * This is set up by the setup-routine at boot-time + */ + + +#undef memcmp +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + + +/* FIXME handle systems with large EBDA's */ +static struct parameters *faked_real_mode = (void *)REAL_MODE_DATA_LOC; + + + +/* + * Output + * ============================================================================= + */ + +/* Base Address */ +#define TTYS0 0x3f8 +#define TTYS0_LSR (TTYS0+0x05) +#define TTYS0_TBR (TTYS0+0x00) + +static void ttys0_tx_byte(unsigned byte) +{ + /* Wait until I can send a byte */ + while((inb(TTYS0_LSR) & 0x20) == 0) + ; + outb(byte, TTYS0_TBR); + /* Wait until the byte is transmitted */ + while(!(inb(TTYS0_LSR) & 0x40)) + ; +} +static void put_char_serial(int c) +{ + if (c == '\n') { + ttys0_tx_byte('\r'); + } + ttys0_tx_byte(c); +} + +static void putchar(int c) +{ +#if 0 + put_char_video(c); +#endif + put_char_serial(c); +} + +#define LONG_LONG_SHIFT ((int)((sizeof(unsigned long long)*CHAR_BIT) - 4)) +#define LONG_SHIFT ((int)((sizeof(unsigned long)*CHAR_BIT) - 4)) +#define INT_SHIFT ((int)((sizeof(unsigned int)*CHAR_BIT) - 4)) +#define SHRT_SHIFT ((int)((sizeof(unsigned short)*CHAR_BIT) - 4)) +#define CHAR_SHIFT ((int)((sizeof(unsigned char)*CHAR_BIT) - 4)) + +/************************************************************************** +PRINTF and friends + + Formats: + %x - 4 bytes int (8 hex digits, lower case) + %X - 4 bytes int (8 hex digits, upper case) + %lx - 8 bytes long (16 hex digits, lower case) + %lX - 8 bytes long (16 hex digits, upper case) + %hx - 2 bytes int (4 hex digits, lower case) + %hX - 2 bytes int (4 hex digits, upper case) + %hhx - 1 byte int (2 hex digits, lower case) + %hhX - 1 byte int (2 hex digits, upper case) + - optional # prefixes 0x or 0X + %d - decimal int + %c - char + %s - string + Note: width specification not supported +**************************************************************************/ +static void printf(const char *fmt, ...) +{ + va_list args; + char *p; + va_start(args, fmt); + for ( ; *fmt != '\0'; ++fmt) { + if (*fmt != '%') { + putchar(*fmt); + continue; + } + if (*++fmt == 's') { + for(p = va_arg(args, char *); *p != '\0'; p++) + putchar(*p); + } + else { /* Length of item is bounded */ + char tmp[40], *q = tmp; + int shift = INT_SHIFT; + if (*fmt == 'L') { + shift = LONG_LONG_SHIFT; + fmt++; + } + else if (*fmt == 'l') { + shift = LONG_SHIFT; + fmt++; + } + else if (*fmt == 'h') { + shift = SHRT_SHIFT; + fmt++; + if (*fmt == 'h') { + shift = CHAR_SHIFT; + fmt++; + } + } + + /* + * Before each format q points to tmp buffer + * After each format q points past end of item + */ + if ((*fmt | 0x20) == 'x') { + /* With x86 gcc, sizeof(long) == sizeof(int) */ + unsigned long long h; + int ncase; + if (shift > LONG_SHIFT) { + h = va_arg(args, unsigned long long); + } + else if (shift > INT_SHIFT) { + h = va_arg(args, unsigned long); + } else { + h = va_arg(args, unsigned int); + } + ncase = (*fmt & 0x20); + for ( ; shift >= 0; shift -= 4) + *q++ = "0123456789ABCDEF"[(h >> shift) & 0xF] | ncase; + } + else if (*fmt == 'd') { + char *r; + long i; + if (shift > LONG_SHIFT) { + i = va_arg(args, long long); + } + else if (shift > INT_SHIFT) { + i = va_arg(args, long); + } else { + i = va_arg(args, int); + } + if (i < 0) { + *q++ = '-'; + i = -i; + } + p = q; /* save beginning of digits */ + do { + *q++ = '0' + (i % 10); + i /= 10; + } while (i); + /* reverse digits, stop in middle */ + r = q; /* don't alter q */ + while (--r > p) { + i = *r; + *r = *p; + *p++ = i; + } + } + else if (*fmt == 'c') + *q++ = va_arg(args, int); + else + *q++ = *fmt; + /* now output the saved string */ + for (p = tmp; p < q; ++p) + putchar(*p); + } + } + va_end(args); +} + +/* + * String Functions + * ============================================================================= + */ + + +size_t strnlen(const char *s, size_t max) +{ + size_t len = 0; + while(len < max && *s) { + len++; + s++; + } + return len; +} + +void* memset(void* s, int c, size_t n) +{ + size_t i; + char *ss = (char*)s; + + for (i=0;i<n;i++) ss[i] = c; + return s; +} + +void* memcpy(void *dest, const void *src, size_t len) +{ + size_t i; + unsigned char *d; + const unsigned char *s; + d = dest; + s = src; + + for (i=0; i < len; i++) + d[i] = s[i]; + + return dest; +} + +int memcmp(void *src1, void *src2, size_t len) +{ + unsigned char *s1, *s2; + size_t i; + s1 = src1; + s2 = src2; + for(i = 0; i < len; i++) { + if (*s1 != *s2) { + return *s2 - *s1; + } + } + return 0; + +} + +/* + * Checksum functions + * ============================================================================= + */ + + +static unsigned long checksum_partial(unsigned long sum, + void *addr, unsigned long length) +{ + uint8_t *ptr; + volatile union { + uint8_t byte[2]; + uint16_t word; + } value; + unsigned long i; + /* In the most straight forward way possible, + * compute an ip style checksum. + */ + sum = 0; + ptr = addr; + for(i = 0; i < length; i++) { + unsigned long value; + value = ptr[i]; + if (i & 1) { + value <<= 8; + } + /* Add the new value */ + sum += value; + /* Wrap around the carry */ + if (sum > 0xFFFF) { + sum = (sum + (sum >> 16)) & 0xFFFF; + } + } + value.byte[0] = sum & 0xff; + value.byte[1] = (sum >> 8) & 0xff; + return value.word & 0xFFFF; + +} + +static unsigned long checksum_final(unsigned long partial) +{ + return (~partial) & 0xFFFF; +} + +static unsigned long compute_checksum(void *vaddr, unsigned long length) +{ + return checksum_final(checksum_partial(0, vaddr, length)); +} + +/* + * Helper functions + * ============================================================================= + */ + + +void append_command_line(struct parameters *real_mode, char *arg, int arg_bytes) +{ + int len, max; + char *dest; + /* skip over what has already been set */ + len = strnlen(real_mode->command_line, sizeof(real_mode->command_line)); + dest = real_mode->command_line + len; + max = sizeof(real_mode->command_line) - 1; + if (max < 1) { + /* No room to append anything :( */ + return; + } + /* Add a space in between strings */ + *dest++ = ' '; + /* Append the added command line */ + max = sizeof(real_mode->command_line) - 1; + if (max > arg_bytes) { + max = arg_bytes; + } + len = strnlen(arg, max); + memcpy(dest, arg, len); + dest += len; + /* Null terminate the string */ + *dest++ = '\0'; +} + +static void set_memsize_k(struct parameters *real_mode, unsigned long mem_k) +{ + /* ALT_MEM_K maxes out at 4GB */ + if (mem_k > 0x3fffff) { + mem_k = 0x3fffff; + } + if (mem_k > (real_mode->alt_mem_k + (1 << 10))) { + /* Use our memory size less 1M */ + real_mode->alt_mem_k = mem_k - (1 << 10); + real_mode->ext_mem_k = mem_k - (1 << 10); + if ((mem_k - (1 << 10)) > 0xFFFF) { + real_mode->ext_mem_k = 0xFC00; /* 64 M */ + } + } +} + +static void add_e820_map(struct parameters *real_mode, + unsigned long long addr, unsigned long long size, + unsigned long type) +{ + unsigned long long high; + unsigned long mem_k; + int i; + i = real_mode->e820_map_nr; + if (i < E820MAX) { + real_mode->e820_map[i].addr = addr; + real_mode->e820_map[i].size = size; + real_mode->e820_map[i].type = type; + real_mode->e820_map_nr++; + } + /* policy I assume that for the legacy memory + * variables memory is contiguous. + */ + if (type == E820_RAM) { + high = addr + size; + if (high >= 0x40000000000ULL) { + mem_k = 0xFFFFFFFF; + } else { + mem_k = high >> 10; + } + set_memsize_k(real_mode, mem_k); + } +} + +/* + * Multiboot + * ============================================================================= + */ + +#define MULTI_MEM_DEBUG 0 +#if MULTI_MEM_DEBUG +#define multi_puts(x) printf("%s", x) +#define multi_put_hex(x) printf("%x", x) +#define multi_put_lhex(x) printf("%Lx", x) +#else +#define multi_puts(x) +#define multi_put_hex(x) +#define multi_put_lhex(x) +#endif /* MULTI_MEM_DEBUG */ + +/* Multiboot Specification */ +struct multiboot_mods { + unsigned mod_start; + unsigned mod_end; + unsigned char *string; + unsigned reserved; +}; + +struct memory_segment { + unsigned long long addr; + unsigned long long size; + unsigned type; +}; + +struct multiboot_info { + unsigned flags; +#define MULTIBOOT_MEM_VALID 0x01 +#define MULTIBOOT_BOOT_DEV_VALID 0x02 +#define MULTIBOOT_CMDLINE_VALID 0x04 +#define MULTIBOOT_MODS_VALID 0x08 +#define MULTIBOOT_AOUT_SYMS_VALID 0x10 +#define MULTIBOOT_ELF_SYMS_VALID 0x20 +#define MULTIBOOT_MMAP_VALID 0x40 + unsigned mem_lower; + unsigned mem_upper; + unsigned char boot_device[4]; + void *command_line; + unsigned mods_count; + struct multiboot_mods *mods_addr; + unsigned syms_num; + unsigned syms_size; + unsigned syms_addr; + unsigned syms_shndx; + unsigned mmap_length; + struct memory_segment *mmap_addr; +}; + +#define MULTIBOOT_MAX_COMMAND_LINE 0xFFFFFFFF + +static void convert_multiboot_memmap( + struct parameters *real_mode, + struct multiboot_info *info) +{ + unsigned size; + unsigned *size_addr; +#define next_seg(seg, size) ((struct memory_segment *)((char *)(seg) + (size))) + struct memory_segment *seg, *end; + + seg = info->mmap_addr; + end = (void *)(((char *)seg) + info->mmap_length); + size_addr = (unsigned *)(((char *)seg) - 4); + size = *size_addr; + multi_puts("mmap_addr: "); multi_put_hex((unsigned)info->mmap_addr); multi_puts("\n"); + multi_puts("mmap_length: "); multi_put_hex(info->mmap_length); multi_puts("\n"); + multi_puts("size_addr: "); multi_put_hex((unsigned)size_addr); multi_puts("\n"); + multi_puts("size: "); multi_put_hex(size); multi_puts("\n"); + multi_puts("end: "); multi_put_hex((unsigned)end); multi_puts("\n"); + for(seg = info->mmap_addr; (seg < end); seg = next_seg(seg,size)) { + multi_puts("multi-mem: "); + multi_put_lhex(seg->size); + multi_puts(" @ "); + multi_put_lhex(seg->addr); + multi_puts(" ("); + switch(seg->type) { + case E820_RAM: + multi_puts("ram"); + break; + case E820_ACPI: + multi_puts("ACPI data"); + break; + case E820_NVS: + multi_puts("ACPI NVS"); + break; + case E820_RESERVED: + default: + multi_puts("reserved"); + break; + } + multi_puts(")\n"); + add_e820_map(real_mode, seg->addr, seg->size, seg->type); + } +#undef next_seg +} + +static void convert_multiboot( + struct param_info *info, struct multiboot_info *mb_info) +{ + if (info->need_mem_sizes && (mb_info->flags & MULTIBOOT_MEM_VALID)) { + /* info->memory is short 1M */ + set_memsize_k(info->real_mode, mb_info->mem_upper + (1 << 10)); + } + if (mb_info->flags & MULTIBOOT_CMDLINE_VALID) { + append_command_line(info->real_mode, mb_info->command_line, + MULTIBOOT_MAX_COMMAND_LINE); + } + if (info->need_mem_sizes && (mb_info->flags & MULTIBOOT_MMAP_VALID)) { + convert_multiboot_memmap(info->real_mode, mb_info); + } + if (mb_info->flags & (MULTIBOOT_MEM_VALID | MULTIBOOT_MMAP_VALID)) { + info->need_mem_sizes = 0; + } +} + + +/* + * Uniform Boot Environment + * ============================================================================= + */ + +#define UBE_MEM_DEBUG 0 +#if UBE_MEM_DEBUG +#define ube_puts(x) printf("%s", x) +#define ube_put_hex(x) printf("%x", x) +#define ube_put_lhex(x) printf("%Lx", x) +#else +#define ube_puts(x) +#define ube_put_hex(x) +#define ube_put_lhex(x) +#endif /* UBE_MEM_DEBUG */ +static void convert_uniform_boot_memory( + struct parameters *real_mode, struct ube_memory *mem) +{ + int i; + int entries; + unsigned long mem_k; + mem_k = 0; + entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); + for(i = 0; (i < entries) && (i < E820MAX); i++) { + unsigned long type; + ube_puts("ube-mem: "); + ube_put_lhex(mem->map[i].size); + ube_puts(" @ "); + ube_put_lhex(mem->map[i].start); + ube_puts(" ("); + switch(mem->map[i].type) { + case UBE_MEM_RAM: + type = E820_RAM; + ube_puts("ram"); + break; + case UBE_MEM_ACPI: + type = E820_ACPI; + ube_puts("ACPI data"); + break; + case UBE_MEM_NVS: + type = E820_NVS; + ube_puts("ACPI NVS"); + break; + case UBE_MEM_RESERVED: + default: + type = E820_RESERVED; + ube_puts("reserved"); + break; + } + ube_puts(")\n"); + add_e820_map(real_mode, + mem->map[i].start, mem->map[i].size, type); + } +} + +static void convert_uniform_boot(struct param_info *info, + struct uniform_boot_header *header) +{ + /* Uniform boot environment */ + unsigned long env_bytes; + char *env; + if (header->arg_bytes) { + append_command_line(info->real_mode, (void *)(header->arg), header->arg_bytes); + } + env = (void *)(header->env); + env_bytes = header->env_bytes; + while(env_bytes) { + struct ube_record *record; + record = (void *)env; + if (record->tag == UBE_TAG_MEMORY) { + if (info->need_mem_sizes) { + convert_uniform_boot_memory(info->real_mode, (void *)record); + info->need_mem_sizes = 0; + } + } + env += record->size; + env_bytes -= record->size; + } +} + + + + +/* + * Hardware + * ============================================================================= + */ + +/* we're getting screwed again and again by this problem of the 8259. + * so we're going to leave this lying around for inclusion into + * crt0.S on an as-needed basis. + * well, that went ok, I hope. Now we have to reprogram the interrupts :-( + * we put them right after the intel-reserved hardware interrupts, at + * int 0x20-0x2F. There they won't mess up anything. Sadly IBM really + * messed this up with the original PC, and they haven't been able to + * rectify it afterwards. Thus the bios puts interrupts at 0x08-0x0f, + * which is used for the internal hardware interrupts as well. We just + * have to reprogram the 8259's, and it isn't fun. + */ + +static void setup_i8259(void) +{ + outb(0x11, 0x20); /*! initialization sequence to 8259A-1*/ + outb(0x11, 0xA0); /*! and to 8259A-2*/ + + outb(0x20, 0x21); /*! start of hardware int's (0x20)*/ + outb(0x28, 0xA1); /*! start of hardware int's 2 (0x28)*/ + + outb(0x04, 0x21); /*! 8259-1 is master*/ + outb(0x02, 0xA1); /*! 8259-2 is slave*/ + + outb(0x01, 0x21); /*! 8086 mode for both*/ + outb(0x01, 0xA1); + + outb(0xFF, 0xA1); /*! mask off all interrupts for now*/ + outb(0xFB, 0x21); /*! mask all irq's but irq2 which is cascaded*/ +} + +static void hardware_setup(struct param_info *info __unused) +{ + /* Disable nmi */ + outb(0x80, 0x70); + + /* Make sure any coprocessor is properly reset.. */ + outb(0, 0xf0); + outb(0, 0xf1); + + setup_i8259(); +} + + +/* + * ELF Boot loader + * ============================================================================= + */ + +static int count_elf_notes(Elf_Bhdr *bhdr) +{ + unsigned char *note, *end; + int count; + count = 0; + note = ((char *)bhdr) + sizeof(*bhdr); + end = ((char *)bhdr) + bhdr->b_size; +#if 0 + printf("count_elf_notes %lx\n", (unsigned long)bhdr); +#endif + while (note < end) { + Elf_Nhdr *hdr; + unsigned char *n_name, *n_desc, *next; + hdr = (Elf_Nhdr *)note; + n_name = note + sizeof(*hdr); + n_desc = n_name + ((hdr->n_namesz + 3) & ~3); + next = n_desc + ((hdr->n_descsz + 3) & ~3); +#if 0 + printf("elf_note = %lx\n", (unsigned long)note); + printf("elf_namesz = %x\n", hdr->n_namesz); + printf("elf_descsz = %x\n", hdr->n_descsz); + printf("elf_type = %x\n", hdr->n_type); + printf("elf_name = %lx\n", (unsigned long)n_name); + printf("elf_desc = %lx\n", (unsigned long)n_desc); +#endif + if (next > end) + break; + count++; + note = next; + } + return count; +} + +static Elf_Nhdr *find_elf_note(Elf_Bhdr *bhdr, + Elf_Word namesz, unsigned char *name, Elf_Word type) +{ + unsigned char *note, *end; + note = ((char *)bhdr) + sizeof(*bhdr); + end = ((char *)bhdr) + bhdr->b_size; + while(note < end) { + Elf_Nhdr *hdr; + unsigned char *n_name, *n_desc, *next; + hdr = (Elf_Nhdr *)note; + n_name = note + sizeof(*hdr); + n_desc = n_name + ((hdr->n_namesz + 3) & ~3); + next = n_desc + ((hdr->n_descsz + 3) & ~3); + if (next > end) + break; + if ((hdr->n_type == type) && + (hdr->n_namesz == namesz) && + (memcmp(n_name, name, namesz) == 0)) { + return hdr; + } + note = next; + } + return 0; +} + +static void convert_elf_command_line(struct param_info *info, + Elf_Word descsz, unsigned char *desc) +{ + append_command_line(info->real_mode, desc, descsz); +} + +struct { + Elf_Word namesz; + unsigned char *name; + Elf_Word type; + void (*convert)(struct param_info *info, Elf_Word descsz, unsigned char *desc); +} elf_notes[] = +{ + { 0, "", EBN_COMMAND_LINE, convert_elf_command_line }, +}; + +static void convert_elf_boot(struct param_info *info, Elf_Bhdr *bhdr) +{ + unsigned char *note, *end; + note = ((char *)bhdr) + sizeof(*bhdr); + end = ((char *)bhdr) + bhdr->b_size; + while(note < end) { + Elf_Nhdr *hdr; + unsigned char *n_name, *n_desc, *next; + size_t i; + hdr = (Elf_Nhdr *)note; + n_name = note + sizeof(*hdr); + n_desc = n_name + ((hdr->n_namesz + 3) & ~3); + next = n_desc + ((hdr->n_descsz + 3) & ~3); + if (next > end) + break; + for(i = 0; i < sizeof(elf_notes)/sizeof(elf_notes[0]); i++) { + if ((hdr->n_type == elf_notes[i].type) && + (hdr->n_namesz == elf_notes[i].namesz) && + (memcmp(n_name, elf_notes[i].name, elf_notes[i].namesz) == 0)) { + elf_notes[i].convert(info, hdr->n_descsz, n_desc); + break; + } + } + note = next; + } +} + +/* + * LinuxBIOS + * ============================================================================= + */ + +#define LB_MEM_DEBUG 0 +#if LB_MEM_DEBUG +#define lb_puts(x) printf("%s", x) +#define lb_put_hex(x) printf("%x", x) +#define lb_put_lhex(x) printf("%Lx", x) +#else +#define lb_puts(x) +#define lb_put_hex(x) +#define lb_put_lhex(x) +#endif /* LB_MEM_DEBUG */ + +static unsigned count_lb_records(void *start, unsigned long length) +{ + struct lb_record *rec; + void *end; + unsigned count; + count = 0; + end = ((char *)start) + length; + for(rec = start; ((void *)rec < end) && + (rec->size <= (unsigned long)(end - (void *)rec)); + rec = (void *)(((char *)rec) + rec->size)) { + count++; + } + return count; +} + +static struct lb_header *__find_lb_table(void *start, void *end) +{ + unsigned char *ptr; + /* For now be stupid.... */ + for(ptr = start; (void *)ptr < end; ptr += 16) { + struct lb_header *head = (void *)ptr; + if ((head->signature[0] == 'L') && + (head->signature[1] == 'B') && + (head->signature[2] == 'I') && + (head->signature[3] == 'O') && + (head->header_bytes == sizeof(*head)) && + (compute_checksum(head, sizeof(*head)) == 0) && + (compute_checksum(ptr + sizeof(*head), head->table_bytes) == + head->table_checksum) && + (count_lb_records(ptr + sizeof(*head), head->table_bytes) == + head->table_entries) + ) { + return head; + } + }; + return 0; +} + +static int find_lb_table(struct param_info *info) +{ + struct lb_header *head; + head = 0; + if (!head) { + /* First try at address 0 */ + head = __find_lb_table((void *)0x00000, (void *)0x1000); + } + if (!head) { + /* Then try at address 0xf0000 */ + head = __find_lb_table((void *)0xf0000, (void *)0x100000); + } + if (head) { + info->has_linuxbios = 1; + info->lb_table = head; + return 1; + } + return 0; +} + +static void convert_lb_memory(struct param_info *info, struct lb_memory *mem) +{ + int i; + int entries; + entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]); + for(i = 0; (i < entries) && (i < E820MAX); i++) { + unsigned long type; + unsigned long long end; + end = mem->map[i].start + mem->map[i].size; + lb_puts("lb-mem: "); + lb_put_lhex(mem->map[i].start); + lb_puts(" - "); + lb_put_lhex(end); + lb_puts(" ("); + switch(mem->map[i].type) { + case LB_MEM_RAM: + type = E820_RAM; + lb_puts("ram"); + break; + default: + type = E820_RESERVED; + lb_puts("reserved"); + break; + } + lb_puts(")\n"); + add_e820_map(info->real_mode, + mem->map[i].start, mem->map[i].size, type); + } + info->need_mem_sizes = 0; +} + +static void query_lb_values(struct param_info *info) +{ + struct lb_header *head; + struct lb_record *rec; + void *start, *end; + head = info->lb_table; + start = ((unsigned char *)head) + sizeof(*head); + end = ((char *)start) + head->table_bytes; + for(rec = start; ((void *)rec < end) && + (rec->size <= (unsigned long)(end - (void *)rec)); + rec = (void *)(((char *)rec) + rec->size)) { + switch(rec->tag) { + case LB_TAG_MEMORY: + { + struct lb_memory *mem; + mem = (struct lb_memory *) rec; + convert_lb_memory(info, mem); + break; + } + default: + break; + }; + } +} + +/* + * PCBIOS + * ============================================================================= + */ +#define PC_MEM_DEBUG 0 +#if PC_MEM_DEBUG +#define pc_puts(x) printf("%s", x) +#define pc_put_hex(x) printf("%x", x) +#define pc_put_lhex(x) printf("%Lx", x) +#else +#define pc_puts(x) +#define pc_put_hex(x) +#define pc_put_lhex(x) +#endif /* PC_MEM_DEBUG */ + +/* functions for querying the pcbios */ +extern void noop(void); /* for testing purposes only */ +extern int meme820(struct e820entry *buf, int count); +extern unsigned int meme801(void); +extern unsigned short mem88(void); +extern unsigned short basememsize(void); + +struct meminfo { + int map_count; + struct e820entry map[E820MAX]; +}; + +static struct meminfo meminfo; +static void get_meminfo(struct param_info *info) +{ + int i; + pc_puts("getting meminfo...\n"); + meminfo.map_count = meme820(meminfo.map, E820MAX); + pc_puts("got meminfo count="); pc_put_hex(meminfo.map_count); pc_puts("\n"); + for(i = 0; i < meminfo.map_count; i++) { + unsigned long long end; + struct e820entry *seg = meminfo.map + i; + end = seg->addr + seg->size; + pc_puts("BIOS-e820: "); + pc_put_lhex(seg->addr); + pc_puts(" - "); + pc_put_lhex(end); + pc_puts(" ("); + switch(seg->type) { + case E820_RAM: + pc_puts("ram"); + info->need_mem_sizes = 0; + break; + case E820_ACPI: + pc_puts("ACPI data"); + break; + case E820_NVS: + pc_puts("ACPI NVS"); + break; + case E820_RESERVED: + default: + pc_puts("reserved"); + break; + } + pc_puts(")\n"); + add_e820_map(info->real_mode, + seg->addr, seg->size, seg->type); + } + info->real_mode->alt_mem_k = meme801(); + info->real_mode->ext_mem_k = mem88(); + if (info->real_mode->alt_mem_k || info->real_mode->ext_mem_k) { + info->need_mem_sizes = 0; + } +} + +static void query_pcbios_values(struct param_info *info) +{ + get_meminfo(info); +} + +/* + * Bootloaders + * ============================================================================= + */ + + +static void query_bootloader_param_class(struct param_info *info) +{ + int has_bootloader_type = 0; + Elf_Bhdr *hdr = 0; + if (!has_bootloader_type && (info->type == 0x2BADB002)) { + /* Orignal multiboot specification */ + info->has_multiboot = 1; + has_bootloader_type = 1; + } + if (!has_bootloader_type && (info->type == 0x0A11B007)) { + /* Uniform boot proposal */ + unsigned long checksum; + struct uniform_boot_header *header; + header = info->data; + checksum = compute_checksum(header, header->header_bytes); + if (checksum == 0) { + info->has_uniform_boot = 1; + has_bootloader_type = 1; + } else{ + printf("Bad uniform boot header checksum!\n"); + } + } + if (info->type == ELF_BHDR_MAGIC) { + hdr = info->data; + } + if (info->param && (info->param->b_signature == ELF_BHDR_MAGIC)) { + hdr = info->param; + } + if (!has_bootloader_type && hdr) { + /* Good ELF boot proposal... */ + unsigned long checksum; + int count; + checksum = 0; + if (hdr->b_checksum != 0) { + checksum = compute_checksum(hdr, hdr->b_size); + } + count = count_elf_notes(hdr); + if ((hdr->b_signature == ELF_BHDR_MAGIC) && + (checksum == 0) && + hdr->b_records == count) { + info->has_elf_boot = 1; + info->param = hdr; + has_bootloader_type = 1; + } + else { + printf("Bad ELF parameter table!\n"); + printf(" checksum = %x\n", checksum); + printf(" count = %x\n", count); + printf(" hdr = %x\n", (unsigned long)hdr); + printf(" b_size = %x\n", hdr->b_size); + printf("b_signature = %x\n", hdr->b_signature); + printf(" b_records = %x\n", hdr->b_records); + } + } + if (!has_bootloader_type) { + printf("Unknown bootloader class!\n"); + printf("type=%x\n", info->type); + printf("data=%x\n", (unsigned)info->data); + printf("param=%x\n", (unsigned)info->param); + } +} + +static void query_bootloader_values(struct param_info *info) +{ + if (info->has_multiboot) { + convert_multiboot(info, info->data); + } + else if (info->has_uniform_boot) { + convert_uniform_boot(info, info->data); + } + else if (info->has_elf_boot) { + convert_elf_boot(info, info->param); + } +} + +/* + * Firmware + * ============================================================================= + */ + +static int bootloader_query_firmware_class(struct param_info *info) +{ + Elf_Nhdr *hdr; + unsigned char *note, *n_name, *n_desc; + int detected_firmware_type; + if (!info->has_elf_boot) { + /* Only the elf boot tables gives us a firmware type */ + return 0; + } + detected_firmware_type = 0; + n_desc = 0; + + hdr = find_elf_note(info->param, 0, 0, EBN_FIRMWARE_TYPE); + if (!hdr) { + /* If I'm not explicitly told the firmware type + * do my best to guess it for myself. + */ + detected_firmware_type = 0; + } else { + note = (char *)hdr; + n_name = note + sizeof(*hdr); + n_desc = n_name + ((hdr->n_namesz + 3) & ~3); + } + if (!detected_firmware_type && hdr && + (hdr->n_descsz == 7) && + (memcmp(n_desc, "PCBIOS", 7) == 0)) { + info->has_pcbios = 1; + detected_firmware_type = 1; + } + if (!detected_firmware_type && hdr && + (hdr->n_descsz == 10) && + (memcmp(n_desc, "LinuxBIOS", 10) == 0)) { + /* Don't believe I'm linuxBIOS unless I can + * find the linuxBIOS table.. + */ + detected_firmware_type = find_lb_table(info); + } + if (!detected_firmware_type && hdr && + (hdr->n_descsz == 0)) { + /* No firmware is present */ + detected_firmware_type = 1; + } + if (!detected_firmware_type && hdr && + (hdr->n_descsz == 1) && + (memcmp(n_desc, "", 1) == 0)) { + /* No firmware is present */ + detected_firmware_type = 1; + } + if (!detected_firmware_type && hdr) { + printf("Unknown firmware type: %s\n", n_desc); + } + return detected_firmware_type; +} + +static void query_firmware_class(struct param_info *info) +{ + int detected_firmware_type = 0; + + /* First say I have no firmware at all... */ + info->has_pcbios = 0; + info->has_linuxbios = 0; + + /* See if the bootloader has told us what + * kind of firmware we are running on. + */ + detected_firmware_type = bootloader_query_firmware_class(info); + + /* See if we can detect linuxbios. */ + if (!detected_firmware_type) { + detected_firmware_type = find_lb_table(info); + } + + if (!detected_firmware_type) { + /* if all else fails assume a standard pcbios... */ + info->has_pcbios = 1; + } + + /* Now print out the firmware type... */ + printf("Firmware type:"); + if (info->has_linuxbios) { + printf(" LinuxBIOS"); + } + if (info->has_pcbios) { + printf(" PCBIOS"); + } + printf("\n"); +} + +static void query_firmware_values(struct param_info *info) +{ + if (info->has_linuxbios) { + query_lb_values(info); + } + if (info->has_pcbios) { + query_pcbios_values(info); + } + +} + +/* + * Debug + * ============================================================================= + */ + +#if 0 +static void print_offsets(void) +{ + struct parameters *real_mode = 0; + printf("print_offsets\n"); + + printf("orig_x =%x\n", (uint32_t)&real_mode->orig_x); + printf("orig_y =%x\n", (uint32_t)&real_mode->orig_y); + printf("ext_mem_k =%x\n", (uint32_t)&real_mode->ext_mem_k); + printf("orig_video_page =%x\n", (uint32_t)&real_mode->orig_video_page); + printf("orig_video_mode =%x\n", (uint32_t)&real_mode->orig_video_mode); + printf("orig_video_cols =%x\n", (uint32_t)&real_mode->orig_video_cols); + printf("unused2 =%x\n", (uint32_t)&real_mode->unused2); + printf("orig_video_ega_bx =%x\n", (uint32_t)&real_mode->orig_video_ega_bx); + printf("unused3 =%x\n", (uint32_t)&real_mode->unused3); + printf("orig_video_lines =%x\n", (uint32_t)&real_mode->orig_video_lines); + printf("orig_video_isVGA =%x\n", (uint32_t)&real_mode->orig_video_isVGA); + printf("orig_video_points =%x\n", (uint32_t)&real_mode->orig_video_points); + printf("lfb_width =%x\n", (uint32_t)&real_mode->lfb_width); + printf("lfb_height =%x\n", (uint32_t)&real_mode->lfb_height); + printf("lfb_depth =%x\n", (uint32_t)&real_mode->lfb_depth); + printf("lfb_base =%x\n", (uint32_t)&real_mode->lfb_base); + printf("lfb_size =%x\n", (uint32_t)&real_mode->lfb_size); + printf("cl_magic =%x\n", (uint32_t)&real_mode->cl_magic); + printf("cl_offset =%x\n", (uint32_t)&real_mode->cl_offset); + printf("lfb_linelength =%x\n", (uint32_t)&real_mode->lfb_linelength); + printf("red_size =%x\n", (uint32_t)&real_mode->red_size); + printf("red_pos =%x\n", (uint32_t)&real_mode->red_pos); + printf("green_size =%x\n", (uint32_t)&real_mode->green_size); + printf("green_pos =%x\n", (uint32_t)&real_mode->green_pos); + printf("blue_size =%x\n", (uint32_t)&real_mode->blue_size); + printf("blue_pos =%x\n", (uint32_t)&real_mode->blue_pos); + printf("rsvd_size =%x\n", (uint32_t)&real_mode->rsvd_size); + printf("rsvd_pos =%x\n", (uint32_t)&real_mode->rsvd_pos); + printf("vesapm_seg =%x\n", (uint32_t)&real_mode->vesapm_seg); + printf("vesapm_off =%x\n", (uint32_t)&real_mode->vesapm_off); + printf("pages =%x\n", (uint32_t)&real_mode->pages); + printf("reserved4 =%x\n", (uint32_t)&real_mode->reserved4); + printf("apm_bios_info =%x\n", (uint32_t)&real_mode->apm_bios_info); + printf("drive_info =%x\n", (uint32_t)&real_mode->drive_info); + printf("sys_desc_table =%x\n", (uint32_t)&real_mode->sys_desc_table); + printf("alt_mem_k =%x\n", (uint32_t)&real_mode->alt_mem_k); + printf("reserved5 =%x\n", (uint32_t)&real_mode->reserved5); + printf("e820_map_nr =%x\n", (uint32_t)&real_mode->e820_map_nr); + printf("reserved6 =%x\n", (uint32_t)&real_mode->reserved6); + printf("mount_root_rdonly =%x\n", (uint32_t)&real_mode->mount_root_rdonly); + printf("reserved7 =%x\n", (uint32_t)&real_mode->reserved7); + printf("ramdisk_flags =%x\n", (uint32_t)&real_mode->ramdisk_flags); + printf("reserved8 =%x\n", (uint32_t)&real_mode->reserved8); + printf("orig_root_dev =%x\n", (uint32_t)&real_mode->orig_root_dev); + printf("reserved9 =%x\n", (uint32_t)&real_mode->reserved9); + printf("aux_device_info =%x\n", (uint32_t)&real_mode->aux_device_info); + printf("reserved10 =%x\n", (uint32_t)&real_mode->reserved10); + printf("param_block_signature=%x\n", (uint32_t)&real_mode->param_block_signature); + printf("param_block_version =%x\n", (uint32_t)&real_mode->param_block_version); + printf("reserved11 =%x\n", (uint32_t)&real_mode->reserved11); + printf("loader_type =%x\n", (uint32_t)&real_mode->loader_type); + printf("loader_flags =%x\n", (uint32_t)&real_mode->loader_flags); + printf("reserved12 =%x\n", (uint32_t)&real_mode->reserved12); + printf("kernel_start =%x\n", (uint32_t)&real_mode->kernel_start); + printf("initrd_start =%x\n", (uint32_t)&real_mode->initrd_start); + printf("initrd_size =%x\n", (uint32_t)&real_mode->initrd_size); + printf("reserved13 =%x\n", (uint32_t)&real_mode->reserved13); + printf("e820_map =%x\n", (uint32_t)&real_mode->e820_map); + printf("reserved16 =%x\n", (uint32_t)&real_mode->reserved16); + printf("command_line =%x\n", (uint32_t)&real_mode->command_line); + printf("reserved17 =%x\n", (uint32_t)&real_mode->reserved17); +} + +static void print_linux_params(struct param_info *info) +{ + int i; + + printf("print_linux_params\n"); + /* Default screen size */ + printf("orig_x =%x\n", info->real_mode->orig_x); + printf("orig_y =%x\n", info->real_mode->orig_y); + printf("orig_video_page =%x\n", info->real_mode->orig_video_page); + printf("orig_video_mode =%x\n", info->real_mode->orig_video_mode); + printf("orig_video_cols =%x\n", info->real_mode->orig_video_cols); + printf("orig_video_lines =%x\n", info->real_mode->orig_video_lines); + printf("orig_video_ega_bx=%x\n", info->real_mode->orig_video_ega_bx); + printf("orig_video_isVGA =%x\n", info->real_mode->orig_video_isVGA); + printf("orig_video_points=%x\n", info->real_mode->orig_video_points); + + + /* System descriptor table... */ + printf("sys_dest_table_len=%x\n", info->real_mode->sys_desc_table.length); + + /* Memory sizes */ + printf("ext_mem_k =%x\n", info->real_mode->ext_mem_k); + printf("alt_mem_k =%x\n", info->real_mode->alt_mem_k); + printf("e820_map_nr =%x\n", info->real_mode->e820_map_nr); + for(i = 0; i < E820MAX; i++) { + printf("addr[%x] =%Lx\n", + i, info->real_mode->e820_map[i].addr); + printf("size[%x] =%Lx\n", + i, info->real_mode->e820_map[i].size); + printf("type[%x] =%Lx\n", + i, info->real_mode->e820_map[i].type); + } + printf("mount_root_rdonly=%x\n", info->real_mode->mount_root_rdonly); + printf("ramdisk_flags =%x\n", info->real_mode->ramdisk_flags); + printf("orig_root_dev =%x\n", info->real_mode->orig_root_dev); + printf("aux_device_info =%x\n", info->real_mode->aux_device_info); + printf("param_block_signature=%x\n", *((uint32_t *)info->real_mode->param_block_signature)); + printf("loader_type =%x\n", info->real_mode->loader_type); + printf("loader_flags =%x\n", info->real_mode->loader_flags); + printf("initrd_start =%x\n", info->real_mode->initrd_start); + printf("initrd_size =%x\n", info->real_mode->initrd_size); + + /* Where I'm putting the command line */ + printf("cl_magic =%x\n", info->real_mode->cl_magic); + printf("cl_offset =%x\n", info->real_mode->cl_offset); + + /* Now print the command line */ + printf("command_line =%s\n", info->real_mode->command_line); +} + + +#endif + +/* + * main + * ============================================================================= + */ + +void initialize_linux_params(struct param_info *info) +{ + int len; + /* First the defaults */ + memset(info->real_mode, 0, PAGE_SIZE); + + /* Default screen size */ + info->real_mode->orig_x = 0; + info->real_mode->orig_y = 25; + info->real_mode->orig_video_page = 0; + info->real_mode->orig_video_mode = 0; + info->real_mode->orig_video_cols = 80; + info->real_mode->orig_video_lines = 25; + info->real_mode->orig_video_ega_bx = 0; + info->real_mode->orig_video_isVGA = 1; + info->real_mode->orig_video_points = 16; + + /* Fill this in later */ + info->real_mode->ext_mem_k = 0; + + /* Fill in later... */ + info->real_mode->e820_map_nr = 0; + + /* Where I'm putting the command line */ + info->real_mode->cl_magic = CL_MAGIC_VALUE; + info->real_mode->cl_offset = 2048; + + info->real_mode->cmd_line_ptr = info->real_mode->cl_offset + (unsigned long) info->real_mode; + + /* Now set the command line */ + len = strnlen(info->image->cmdline, sizeof(info->real_mode->command_line) -1); + memcpy(info->real_mode->command_line, info->image->cmdline, len); + info->real_mode->command_line[len] = '\0'; + + /* from the bios initially */ + memset(&info->real_mode->apm_bios_info, 0, sizeof(info->real_mode->apm_bios_info)); + + memset(&info->real_mode->drive_info, 0, sizeof(info->real_mode->drive_info)); + + /* forget it for now... */ + info->real_mode->sys_desc_table.length = 0; + + /* Fill this in later */ + info->real_mode->alt_mem_k = 0; + info->real_mode->ext_mem_k = 0; + + /* default yes: this can be overridden on the command line */ + info->real_mode->mount_root_rdonly = 0xFFFF; + + /* old ramdisk options, These really should be command line + * things... + */ + info->real_mode->ramdisk_flags = info->image->ramdisk_flags; + + /* default to /dev/hda. + * Override this on the command line if necessary + */ + info->real_mode->orig_root_dev = info->image->root_dev; + + /* Originally from the bios? */ + info->real_mode->aux_device_info = 0; + + /* Boot block magic */ + memcpy(info->real_mode->param_block_signature, "HdrS", 4); + info->real_mode->param_block_version = 0x0201; + + /* Say I'm a kernel boot loader */ + info->real_mode->loader_type = (LOADER_TYPE_KERNEL << 4) + 0 /* version */; + + /* No loader flags */ + info->real_mode->loader_flags = 0; + + /* Ramdisk address and size ... */ + info->real_mode->initrd_start = 0; + info->real_mode->initrd_size = 0; + if (info->image->initrd_size) { + info->real_mode->initrd_start = info->image->initrd_start; + info->real_mode->initrd_size = info->image->initrd_size; + } + + /* Now remember those things that I need */ + info->need_mem_sizes = 1; +} + +void *convert_params(unsigned type, void *data, void *param, void *image) +{ + struct param_info info; +#if 0 + printf("hello world\n"); +#endif + info.real_mode = faked_real_mode; + info.type = type; + info.data = data; + info.param = param; + info.image = image; + initialize_linux_params(&info); + query_bootloader_param_class(&info); + query_firmware_class(&info); + query_firmware_values(&info); + query_bootloader_values(&info); + + /* Do the hardware setup that linux might forget... */ + hardware_setup(&info); + + /* Print some debugging information */ +#if 0 + printf("EXT_MEM_K=%x\n", info.real_mode->ext_mem_k); + printf("ALT_MEM_K=%x\n", info.real_mode->alt_mem_k); +#endif +#if 0 + print_offsets(); + print_linux_params(&info); +#endif +#if 0 + printf("info.real_mode = 0x%x\n", info.real_mode ); + printf("Jumping to Linux\n"); +#endif + return info.real_mode; +} + Added: trunk/util/mkelfImage/linux-i386/head.S =================================================================== --- trunk/util/mkelfImage/linux-i386/head.S (rev 0) +++ trunk/util/mkelfImage/linux-i386/head.S 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,476 @@ +/* + * exec_kernel/user_space/head.S + * + * Copyright (C) 2000, 2002, 2003 Eric Biederman + * + * Parts of this code were take from the linux startup + * code of linux-2.4.0-test9 + * + * Other parts were taken from etherboot-5.0.5 + */ + +#define ASSEMBLY 1 + +#define RELOC 0x10000 +#define PROT_CODE_SEG 0x10 +#define PROT_DATA_SEG 0x18 +#define REAL_CODE_SEG 0x08 +#define REAL_DATA_SEG 0x20 + + .equ CR0_PE,1 + +.text +.code32 + + +#include "convert.h" + + .globl startup_32 +startup_32: + cld + cli + + # Save the arguments safely out of the way + movl %eax, boot_type + movl %ebx, boot_data + cmp $0,%esp + jz 1f + movl 4(%esp), %eax + movl %eax, boot_param +1: + + movl stack_start, %esp + + # Clear eflags + pushl $0 + popfl + + # Clear BSS + xorl %eax,%eax + movl $ _edata,%edi + movl $ _end,%ecx + subl %edi,%ecx + cld + rep + stosb + + # Move the gdt where Linux will not smash it during decompression + movl $gdt, %esi + movl $GDTLOC, %edi + movl $(gdt_end - gdt), %ecx + rep movsb + + # Linux makes stupid assumptions about the segments + # that are already setup, so setup a new gdt & ldt + # and then reload the segment registers. + + lgdt gdt_48 + lidt idt_48 + + # Load the data segment registers + movl $ PROT_DATA_SEG, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss + + pushl $image_params # image build time parameters as forth arg + pushl boot_param # boot_param pointer as third arg + pushl boot_data # boot data pointer as second arg + pushl boot_type # boot data type as first argument + call convert_params + + movl %eax, %esi # put the real mode pointer in a safe place + addl $16, %esp # pop the arguments + + + # Setup the registers before jumping to linux + + + # clear eflags + pushl $0 + popfl + + # Flag to indicate we are the bootstrap processor + xorl %ebx, %ebx + + # Clear the unspecified registers for good measure + xorl %eax, %eax + xorl %ecx, %ecx + xorl %edx, %edx + xorl %edi, %edi + xorl %esp, %esp + xorl %ebp, %ebp + + + # Jump to the linux kernel + ljmp $ PROT_CODE_SEG , $ 0x100000 + + + /* Routines to query the BIOS... */ + + +/************************************************************************** +E820_MEMSIZE - Get a listing of memory regions +**************************************************************************/ +#define SMAP 0x534d4150 + .globl meme820 +meme820: + pushl %ebp + movl %esp, %ebp + pushl %ebx + pushl %esi + pushl %edi + movl 8(%ebp), %edi /* Address to return e820 structures at */ + subl $RELOC, %edi + movl 12(%ebp), %esi /* Maximum number of e820 structurs to return */ + pushl %esi + call _prot_to_real + .code16 + xorl %ebx, %ebx +jmpe820: + movl $0xe820, %eax + movl $SMAP, %edx + movl $20, %ecx + /* %di was setup earlier */ + int $0x15 + jc bail820 + + cmpl $SMAP, %eax + jne bail820 + +good820: + /* If this is useable memory, we save it by simply advancing %di by + * sizeof(e820rec) + */ + decl %esi + testl %esi,%esi + jz bail820 + + addw $20, %di +again820: + cmpl $0, %ebx /* check to see if %ebx is set to EOF */ + jne jmpe820 + +bail820: + data32 call _real_to_prot + .code32 + popl %eax + subl %esi, %eax /* Compute how many structure we read */ + + /* Restore everything else */ + popl %edi + popl %esi + popl %ebx + movl %ebp, %esp + popl %ebp + ret + + +/************************************************************************** +MEME801 - Determine size of extended memory +**************************************************************************/ + .globl meme801 +meme801: + pushl %ebx + pushl %esi + pushl %edi + call _prot_to_real + .code16 + + stc # fix to work around buggy + xorw %cx,%cx # BIOSes which dont clear/set + xorw %dx,%dx # carry on pass/error of + # e801h memory size call + # or merely pass cx,dx though + # without changing them. + movw $0xe801,%ax + int $0x15 + jc e801absent + + cmpw $0x0, %cx # Kludge to handle BIOSes + jne e801usecxdx # which report their extended + cmpw $0x0, %dx # memory in AX/BX rather than + jne e801usecxdx # CX/DX. The spec I have read + movw %ax, %cx # seems to indicate AX/BX + movw %bx, %dx # are more reasonable anyway... + +e801usecxdx: + andl $0xffff, %edx # clear sign extend + shll $6, %edx # and go from 64k to 1k chunks + movl %edx, %eax # store extended memory size + andl $0xffff, %ecx # clear sign extend + addl %ecx, %eax # and add lower memory into + + jmp e801out +e801absent: + xorl %eax,%eax + +e801out: + data32 call _real_to_prot + .code32 + /* Restore Everything */ + popl %edi + popl %esi + popl %ebx + ret + +/************************************************************************** +MEM88 - Determine size of extended memory +**************************************************************************/ + .globl mem88 +mem88: + pushl %ebx + pushl %esi + pushl %edi + call _prot_to_real + .code16 + + movb $0x88, %ah + int $0x15 + andl $0xffff, %eax + + data32 call _real_to_prot + .code32 + + /* Restore Everything */ + popl %edi + popl %esi + popl %ebx + ret + + +/************************************************************************** +BASEMEMSIZE - Get size of the conventional (base) memory +**************************************************************************/ + .globl basememsize +basememsize: + call _prot_to_real + .code16 + int $0x12 + movw %ax,%cx + DATA32 call _real_to_prot + .code32 + movw %cx,%ax + ret + +/************************************************************************** +_REAL_TO_PROT - Go from REAL mode to Protected Mode +**************************************************************************/ + .globl _real_to_prot +_real_to_prot: + .code16 + cli + cs + addr32 lgdt gdt_48 - RELOC + movl %cr0,%eax + orl $CR0_PE,%eax + movl %eax,%cr0 /* turn on protected mode */ + + /* flush prefetch queue, and reload %cs:%eip */ + data32 ljmp $PROT_CODE_SEG,$1f +1: + .code32 + /* reload other segment registers */ + movl $PROT_DATA_SEG,%eax + movl %eax,%ds + movl %eax,%es + movl %eax,%ss + addl $RELOC,%esp /* Fix up stack pointer */ + xorl %eax,%eax + movl %eax,%fs + movl %eax,%gs + popl %eax /* Fix up return address */ + addl $RELOC,%eax + pushl %eax + + /* switch to protected mode idt */ + cs + lidt idt_48 + ret + +/************************************************************************** +_PROT_TO_REAL - Go from Protected Mode to REAL Mode +**************************************************************************/ + .globl _prot_to_real +_prot_to_real: + .code32 + popl %eax + subl $RELOC,%eax /* Adjust return address */ + pushl %eax + subl $RELOC,%esp /* Adjust stack pointer */ + ljmp $REAL_CODE_SEG,$1f- RELOC /* jump to a 16 bit segment */ +1: + .code16 + /* clear the PE bit of CR0 */ + movl %cr0,%eax + andl $0!CR0_PE,%eax + movl %eax,%cr0 + + /* make intersegment jmp to flush the processor pipeline + * and reload %cs:%eip (to clear upper 16 bits of %eip). + */ + data32 ljmp $(RELOC)>>4,$2f- RELOC +2: + /* we are in real mode now + * set up the real mode segment registers : %ds, $ss, %es + */ + movw %cs,%ax + movw %ax,%ds + movw %ax,%es + movw %ax,%ss + movw %ax,%fs + movw %ax,%gs + + /* Switch to the real mode idt */ + cs + addr32 lidt idt_real - RELOC + + sti + data32 ret /* There is a 32 bit return address on the stack */ + .code32 + +boot_type: .long 0 +boot_data: .long 0 +boot_param: .long 0 + +idt_real: + .word 0x400 # idt limit = 256 + .word 0, 0 +idt_48: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L +gdt_48: + .word gdt_end - gdt - 1 # gdt limit=40, + # (5 GDT entries) + .long GDTLOC # gdt base + +# Descriptor tables +# These need to be in a seperate section so I can be +# certain later activities dont stomp them +gdt: + /* 0x00 */ + .word 0, 0, 0, 0 # dummy + + /* 0x08 */ + /* 16 bit real mode code segment */ + .word 0xffff,(RELOC&0xffff) + .byte (RELOC>>16),0x9b,0x00,(RELOC>>24) + + /* 0x10 */ + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9A00 # code read/exec + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) + + /* 0x18 */ + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9200 # data read/write + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) + + /* 0x20 */ + /* 16 bit real mode data segment */ + .word 0xffff,(RELOC&0xffff) + .byte (RELOC>>16),0x93,0x00,(RELOC>>24) + + /* For 2.5.x the kernel segments have moved */ + + /* 0x28 dummy */ + .quad 0 + + /* 0x30 dummy */ + .quad 0 + /* 0x38 dummy */ + .quad 0 + /* 0x40 dummy */ + .quad 0 + /* 0x48 dummy */ + .quad 0 + /* 0x50 dummy */ + .quad 0 + /* 0x58 dummy */ + .quad 0 + + + /* 0x60 */ + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9A00 # code read/exec + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) + + /* 0x68 */ + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9200 # data read/write + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) +/* + * The layout of the per-CPU GDT under Linux: + * + * 0 - null + * 1 - reserved + * 2 - reserved + * 3 - reserved + * + * 4 - default user CS <==== new cacheline + * 5 - default user DS + * + * ------- start of TLS (Thread-Local Storage) segments: + * + * 6 - TLS segment #1 [ glibc's TLS segment ] + * 7 - TLS segment #2 [ Wine's %fs Win32 segment ] + * 8 - TLS segment #3 + * 9 - reserved + * 10 - reserved + * 11 - reserved + * + * ------- start of kernel segments: + * + * 12 - kernel code segment <==== new cacheline + * 13 - kernel data segment + * 14 - TSS + * 15 - LDT + * 16 - PNPBIOS support (16->32 gate) + * 17 - PNPBIOS support + * 18 - PNPBIOS support + * 19 - PNPBIOS support + * 20 - PNPBIOS support + * 21 - APM BIOS support + * 22 - APM BIOS support + * 23 - APM BIOS support + */ +gdt_end: + + + + .section ".trailer", "a" + /* Constants set at build time, these are at the very end of my image */ + .balign 16 + .global image_params +image_params: + +convert_magic: + .long CONVERT_MAGIC +gdt_size: + .long gdt_end - gdt +bss_size: + .long bss_size +ramdisk_flags: + .word 0 +root_dev: + .word DEFAULT_ROOT_DEV +entry: + .long 0 +initrd_start: + .long 0 +initrd_size: + .long 0 +cmdline: + .asciz "BOOT_IMAGE=head.S console=ttyS0 ip=dhcp root=/dev/nfs" + .org cmdline + CMDLINE_MAX, 0 +cmdline_end: Added: trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c =================================================================== --- trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c (rev 0) +++ trunk/util/mkelfImage/linux-i386/mkelf-linux-i386.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,388 @@ +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#define _GNU_SOURCE +#include <getopt.h> +#include "elf.h" +#include "elf_boot.h" +#include "convert.h" +#include "x86-linux.h" +#include "mkelfImage.h" + +static unsigned char payload[] = { +#include "convert.bin.c" +}; + +struct kernel_info; +static void (*parse_kernel_type)(struct kernel_info *info, char *kernel_buf, size_t kernel_size); +static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size); +static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size); + +char *vmlinux_i386_probe(char *kernel_buf, off_t kernel_size) +{ + Elf32_Ehdr *ehdr; + Elf32_Phdr *phdr; + int i; + int hdr1, hdr2; + ehdr = (Elf32_Ehdr *)kernel_buf; + if ( + (ehdr->e_ident[EI_MAG0] != ELFMAG0) || + (ehdr->e_ident[EI_MAG1] != ELFMAG1) || + (ehdr->e_ident[EI_MAG2] != ELFMAG2) || + (ehdr->e_ident[EI_MAG3] != ELFMAG3)) { + return "No ELF signature found on kernel\n"; + } + if (ehdr->e_ident[EI_CLASS] != ELFCLASS32) { + return "Not a 32bit ELF kernel\n"; + } + if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { + return "Not a little endian ELF kernel\n"; + } + if (le16_to_cpu(ehdr->e_type) != ET_EXEC) { + return "Not an executable kernel\n"; + } + if (le16_to_cpu(ehdr->e_machine) != EM_386) { + return "Not an i386 kernel\n"; + } + if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) || + (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) { + return "Kernel not using ELF version 1.\n"; + } + if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) { + return "Kernel uses bad program header size.\n"; + } + phdr = (Elf32_Phdr *)(kernel_buf + le32_to_cpu(ehdr->e_phoff)); + hdr1 = hdr2 = -1; + for(i = 0; i < le32_to_cpu(ehdr->e_phnum); i++) { + if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) + continue; + if (((hdr1 != -1) && + ((le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff) != 0x100000)) || + (hdr2 != -1)) { + return "Too many PT_LOAD segments to be a linux kernel\n"; + } + if (hdr1 == -1) { + hdr1 = i; + } else { + hdr2 = i; + } + } + if (hdr1 == -1) { + return "No PT_LOAD segments!\n"; + } + parse_kernel_type = parse_elf32_kernel; + return 0; +} + +char *bzImage_i386_probe(char *kernel_buf, off_t kernel_size) +{ + struct x86_linux_header *hdr; + unsigned long offset; + int setup_sects; + hdr = (struct x86_linux_header *)kernel_buf; + + if (le16_to_cpu(hdr->boot_sector_magic) != 0xaa55) { + return "No bootsector magic"; + } + if (memcmp(hdr->header_magic, "HdrS", 4) != 0) { + return "Not a linux kernel"; + } + + if (le16_to_cpu(hdr->protocol_version) < 0x202) { + return "Kernel protcols version before 2.02 not supported"; + } + + setup_sects = hdr->setup_sects; + if (setup_sects == 0) { + setup_sects = 4; + } + offset = 512 + (512 *setup_sects); + if (offset > kernel_size) { + return "Not enough bytes"; + } + parse_kernel_type = parse_bzImage_kernel; + return 0; +} + +char *linux_i386_probe(char *kernel_buf, off_t kernel_size) +{ + char *result; + result = ""; + if (result) result = bzImage_i386_probe(kernel_buf, kernel_size); + if (result) result = vmlinux_i386_probe(kernel_buf, kernel_size); + if (result) result = bzImage_i386_probe(kernel_buf, kernel_size); + return result; +} + +struct kernel_info +{ + void *kernel; + size_t filesz; + size_t memsz; + size_t paddr; + size_t vaddr; + void *kernel2; + size_t filesz2; + size_t memsz2; + size_t paddr2; + size_t vaddr2; + size_t entry; + char *version; +}; + +static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) +{ + Elf32_Ehdr *ehdr; + Elf32_Phdr *phdr; + int i; + int hdr1, hdr2; + ehdr = (Elf32_Ehdr *)kernel_buf; + phdr = (Elf32_Phdr *)(kernel_buf + ehdr->e_phoff); + hdr1 = hdr2 = -1; + for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { + if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) + continue; + if (hdr2 != -1) { + die("Too many PT_LOAD segments to be a linux kernel\n"); + } + if (hdr1 == -1) { + hdr1 = i; + } else { + hdr2 = i; + } + } + if (hdr1 == -1) { + die("No PT_LOAD segments!\n"); + } + info->kernel = kernel_buf + le32_to_cpu(phdr[hdr1].p_offset); + info->filesz = le32_to_cpu(phdr[hdr1].p_filesz); + info->memsz = le32_to_cpu(phdr[hdr1].p_memsz); + info->paddr = le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff; + info->vaddr = le32_to_cpu(phdr[hdr1].p_vaddr); + + if (hdr2 != -1) { + info->kernel2 = kernel_buf + le32_to_cpu(phdr[hdr2].p_offset); + info->filesz2 = le32_to_cpu(phdr[hdr2].p_filesz); + info->memsz2 = le32_to_cpu(phdr[hdr2].p_memsz); + info->paddr2 = le32_to_cpu(phdr[hdr2].p_paddr) & 0xfffffff; + info->vaddr2 = le32_to_cpu(phdr[hdr2].p_vaddr); + } + + info->entry = 0x100000; + info->version = "unknown"; +} + +static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) +{ + struct x86_linux_header *hdr; + unsigned long offset; + int setup_sects; + hdr = (struct x86_linux_header *)kernel_buf; + setup_sects = hdr->setup_sects; + if (setup_sects == 0) { + setup_sects = 4; + } + offset = 512 + (512 *setup_sects); + + info->kernel = kernel_buf + offset; + info->filesz = kernel_size - offset; + info->memsz = 0x700000; + info->paddr = 0x100000; + info->vaddr = 0x100000; + info->entry = info->paddr; + info->version = kernel_buf + 512 + le16_to_cpu(hdr->kver_addr); +} + +static void parse_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size) +{ + memset(info, 0, sizeof(*info)); + if (parse_kernel_type) { + parse_kernel_type(info, kernel_buf, kernel_size); + } + else { + die("Unknown kernel format"); + } +} + +void linux_i386_usage(void) +{ + printf( + " --command-line=<string> Set the command line to <string>\n" + " --append=<string> Set the command line to <string>\n" + " --initrd=<filename> Set the initrd to <filename>\n" + " --ramdisk=<filename> Set the initrd to <filename>\n" + " --ramdisk-base=<addr> Set the initrd load address to <addr>\n" + ); + return; +} + + +#define OPT_CMDLINE OPT_MAX+0 +#define OPT_RAMDISK OPT_MAX+1 +#define OPT_RAMDISK_BASE OPT_MAX+2 + +#define DEFAULT_RAMDISK_BASE (8*1024*1024) + +int linux_i386_mkelf(int argc, char **argv, + struct memelfheader *ehdr, char *kernel_buf, off_t kernel_size) +{ + const char *ramdisk, *cmdline; + unsigned long ramdisk_base; + char *payload_buf, *ramdisk_buf; + off_t payload_size, ramdisk_size; + struct memelfphdr *phdr; + struct memelfnote *note; + struct kernel_info kinfo; + struct image_parameters *params; + int index; + + int opt; + static const struct option options[] = { + MKELF_OPTIONS + { "command-line", 1, 0, OPT_CMDLINE }, + { "append", 1, 0, OPT_CMDLINE }, + { "initrd", 1, 0, OPT_RAMDISK }, + { "ramdisk", 1, 0, OPT_RAMDISK }, + { "ramdisk-base", 1, 0, OPT_RAMDISK_BASE }, + { 0 , 0, 0, 0 }, + }; + static const char short_options[] = MKELF_OPT_STR; + + ramdisk_base = DEFAULT_RAMDISK_BASE; + ramdisk = 0; + cmdline=""; + + while((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { + switch(opt) { + case '?': + error("Unknown option %s\n", argv[optind]); + break; + case OPT_RAMDISK_BASE: + { + char *end; + unsigned long base; + base = strtoul(optarg, &end, 0); + if ((end == optarg) || (*end != '\0')) { + error("Invalid ramdisk base\n"); + } + ramdisk_base = base; + } + case OPT_RAMDISK: + ramdisk = optarg; + break; + case OPT_CMDLINE: + cmdline = optarg; + break; + default: + break; + } + } + ehdr->ei_class = ELFCLASS32; + ehdr->ei_data = ELFDATA2LSB; + ehdr->e_type = ET_EXEC; + ehdr->e_machine = EM_386; + + /* locate the payload buffer */ + payload_buf = payload; + payload_size = sizeof(payload); + + /* slurp the input files */ + ramdisk_buf = slurp_file(ramdisk, &ramdisk_size); + + /* parse the kernel */ + parse_kernel(&kinfo, kernel_buf, kernel_size); + + /* Find the parameters */ + params = (void *)(payload_buf + (payload_size - sizeof(*params))); + + /* A sanity check against bad versions of binutils */ + if (params->convert_magic != CONVERT_MAGIC) { + die("Internal error convert_magic %08x != %08x\n", + params->convert_magic, CONVERT_MAGIC); + } + + /* Copy the command line */ + strncpy(params->cmdline, cmdline, sizeof(params->cmdline)); + params->cmdline[sizeof(params->cmdline)-1]= '\0'; + + + /* Add a program header for the note section */ + index = 4; + index += kinfo.kernel2 ? 1:0; + index += ramdisk_size ? 1:0; + phdr = add_program_headers(ehdr, index); + + /* Fill in the program headers*/ + phdr[0].p_type = PT_NOTE; + + /* Fill in the converter program headers */ + phdr[1].p_paddr = CONVERTLOC; + phdr[1].p_vaddr = CONVERTLOC; + phdr[1].p_filesz = payload_size; + phdr[1].p_memsz = payload_size + params->bss_size; + phdr[1].p_data = payload; + + /* Reserve space for the REAL MODE DATA segment AND the GDT segment */ + phdr[2].p_paddr = REAL_MODE_DATA_LOC; + phdr[2].p_vaddr = REAL_MODE_DATA_LOC; + phdr[2].p_filesz = 0; + phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size; + phdr[2].p_data = 0; + + phdr[3].p_paddr = kinfo.paddr; + phdr[3].p_vaddr = kinfo.vaddr; + phdr[3].p_filesz = kinfo.filesz; + phdr[3].p_memsz = kinfo.memsz; + phdr[3].p_data = kinfo.kernel; + + index = 4; + /* Put the second kernel frament if present */ + if (kinfo.kernel2) { + phdr[index].p_paddr = kinfo.paddr2; + phdr[index].p_vaddr = kinfo.vaddr2; + phdr[index].p_filesz = kinfo.filesz2; + phdr[index].p_memsz = kinfo.memsz2; + phdr[index].p_data = kinfo.kernel2; + index++; + } + + /* Put the ramdisk at ramdisk base. + */ + params->initrd_start = params->initrd_size = 0; + if (ramdisk_size) { + phdr[index].p_paddr = ramdisk_base; + phdr[index].p_vaddr = ramdisk_base; + phdr[index].p_filesz = ramdisk_size; + phdr[index].p_memsz = ramdisk_size; + phdr[index].p_data = ramdisk_buf; + params->initrd_start = phdr[index].p_paddr; + params->initrd_size = phdr[index].p_filesz; + index++; + } + + /* Set the start location */ + params->entry = kinfo.entry; + ehdr->e_entry = phdr[1].p_paddr; + + /* Setup the elf notes */ + note = add_notes(ehdr, 3); + note[0].n_type = EIN_PROGRAM_NAME; + note[0].n_name = "ELFBoot"; + note[0].n_desc = "Linux"; + note[0].n_descsz = strlen(note[0].n_desc)+1; + + note[1].n_type = EIN_PROGRAM_VERSION; + note[1].n_name = "ELFBoot"; + note[1].n_desc = kinfo.version; + note[1].n_descsz = strlen(note[1].n_desc); + + note[2].n_type = EIN_PROGRAM_CHECKSUM; + note[2].n_name = "ELFBoot"; + note[2].n_desc = 0; + note[2].n_descsz = 2; + + return 0; +} + Added: trunk/util/mkelfImage/linux-i386/uniform_boot.h =================================================================== --- trunk/util/mkelfImage/linux-i386/uniform_boot.h (rev 0) +++ trunk/util/mkelfImage/linux-i386/uniform_boot.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,67 @@ +#ifndef _LINUX_UNIFORM_BOOT_H +#define _LINUX_UNIFORM_BOOT_H + +/* The uniform boot environment information is restricted to + * hardware information. In particular for a simple enough machine + * all of the environment information should be able to reside in + * a rom and not need to be moved. This information is the + * information a trivial boot room can pass to linux to let it + * run the hardware. + * + * Also all of the information should be Position Independent Data. + * That is it should be safe to relocated any of the information + * without it's meaning/correctnes changing. The exception is the + * uniform_boot_header with it's two pointers arg & env. + * + * The addresses in the arg & env pointers must be physical + * addresses. A physical address is an address you put in the page + * table. + * + * The Command line is for user policy. Things like the default + * root device. + * + */ + +struct uniform_boot_header +{ + unsigned long header_bytes; + unsigned long header_checksum; + unsigned long arg; + unsigned long arg_bytes; + unsigned long env; + unsigned long env_bytes; +}; + +/* Every entry in the boot enviroment list will correspond to a boot + * info record. Encoding both type and size. The type is obviously + * so you can tell what it is. The size allows you to skip that + * boot enviroment record if you don't know what it easy. This allows + * forward compatibility with records not yet defined. + */ +struct ube_record { + unsigned long tag; /* tag ID */ + unsigned long size; /* size of record (in bytes) */ + unsigned long data[0]; /* data */ +}; + + +#define UBE_TAG_MEMORY 0x0001 + +struct ube_memory_range { + unsigned long long start; + unsigned long long size; + unsigned long type; +#define UBE_MEM_RAM 1 +#define UBE_MEM_RESERVED 2 +#define UBE_MEM_ACPI 3 +#define UBE_MEM_NVS 4 + +}; + +struct ube_memory { + unsigned long tag; + unsigned long size; + struct ube_memory_range map[0]; +}; + +#endif /* _LINUX_UNIFORM_BOOT_H */ Added: trunk/util/mkelfImage/linux-i386/x86-linux.h =================================================================== --- trunk/util/mkelfImage/linux-i386/x86-linux.h (rev 0) +++ trunk/util/mkelfImage/linux-i386/x86-linux.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,162 @@ +#ifndef X86_LINUX_H +#define X86_LINUX_H + +#define E820MAP 0x2d0 /* our map */ +#define E820MAX 32 /* number of entries in E820MAP */ +#define E820NR 0x1e8 /* # entries in E820MAP */ + +#ifndef ASSEMBLY + +struct e820entry { + uint64_t addr; /* start of memory segment */ + uint64_t size; /* size of memory segment */ + uint32_t type; /* type of memory segment */ +#define E820_RAM 1 +#define E820_RESERVED 2 +#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ +#define E820_NVS 4 +} __attribute__((packed)); + +/* FIXME expand on drive_info_struct... */ +struct drive_info_struct { + uint8_t dummy[32]; +}; +struct sys_desc_table { + uint16_t length; + uint8_t table[318]; +}; + +struct apm_bios_info { + uint16_t version; /* 0x40 */ + uint16_t cseg; /* 0x42 */ + uint32_t offset; /* 0x44 */ + uint16_t cseg_16; /* 0x48 */ + uint16_t dseg; /* 0x4a */ + uint16_t flags; /* 0x4c */ + uint16_t cseg_len; /* 0x4e */ + uint16_t cseg_16_len; /* 0x50 */ + uint16_t dseg_len; /* 0x52 */ + uint8_t reserved[44]; /* 0x54 */ +}; + + +struct x86_linux_param_header { + uint8_t orig_x; /* 0x00 */ + uint8_t orig_y; /* 0x01 */ + uint16_t ext_mem_k; /* 0x02 -- EXT_MEM_K sits here */ + uint16_t orig_video_page; /* 0x04 */ + uint8_t orig_video_mode; /* 0x06 */ + uint8_t orig_video_cols; /* 0x07 */ + uint16_t unused2; /* 0x08 */ + uint16_t orig_video_ega_bx; /* 0x0a */ + uint16_t unused3; /* 0x0c */ + uint8_t orig_video_lines; /* 0x0e */ + uint8_t orig_video_isVGA; /* 0x0f */ + uint16_t orig_video_points; /* 0x10 */ + + /* VESA graphic mode -- linear frame buffer */ + uint16_t lfb_width; /* 0x12 */ + uint16_t lfb_height; /* 0x14 */ + uint16_t lfb_depth; /* 0x16 */ + uint32_t lfb_base; /* 0x18 */ + uint32_t lfb_size; /* 0x1c */ + uint16_t cl_magic; /* 0x20 */ +#define CL_MAGIC_VALUE 0xA33F + uint16_t cl_offset; /* 0x22 */ + uint16_t lfb_linelength; /* 0x24 */ + uint8_t red_size; /* 0x26 */ + uint8_t red_pos; /* 0x27 */ + uint8_t green_size; /* 0x28 */ + uint8_t green_pos; /* 0x29 */ + uint8_t blue_size; /* 0x2a */ + uint8_t blue_pos; /* 0x2b */ + uint8_t rsvd_size; /* 0x2c */ + uint8_t rsvd_pos; /* 0x2d */ + uint16_t vesapm_seg; /* 0x2e */ + uint16_t vesapm_off; /* 0x30 */ + uint16_t pages; /* 0x32 */ + uint8_t reserved4[12]; /* 0x34 -- 0x3f reserved for future expansion */ + + struct apm_bios_info apm_bios_info; /* 0x40 */ + struct drive_info_struct drive_info; /* 0x80 */ + struct sys_desc_table sys_desc_table; /* 0xa0 */ + uint32_t alt_mem_k; /* 0x1e0 */ + uint8_t reserved5[4]; /* 0x1e4 */ + uint8_t e820_map_nr; /* 0x1e8 */ + uint8_t reserved6[8]; /* 0x1e9 */ + uint8_t setup_sects; /* 0x1f1 */ + uint16_t mount_root_rdonly; /* 0x1f2 */ + uint8_t reserved7[4]; /* 0x1f4 */ + uint16_t ramdisk_flags; /* 0x1f8 */ +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + uint16_t vid_mode; /* 0x1fa */ + uint16_t root_dev; /* 0x1fc */ + uint8_t reserved9[1]; /* 0x1fe */ + uint8_t aux_device_info; /* 0x1ff */ + /* 2.00+ */ + uint8_t reserved10[2]; /* 0x200 */ + uint8_t header_magic[4]; /* 0x202 */ + uint16_t protocol_version; /* 0x206 */ + uint8_t reserved11[8]; /* 0x208 */ + uint8_t loader_type; /* 0x210 */ +#define LOADER_TYPE_LOADLIN 1 +#define LOADER_TYPE_BOOTSECT_LOADER 2 +#define LOADER_TYPE_SYSLINUX 3 +#define LOADER_TYPE_ETHERBOOT 4 +#define LOADER_TYPE_UNKNOWN 0xFF + uint8_t loader_flags; /* 0x211 */ + uint8_t reserved12[2]; /* 0x212 */ + uint32_t kernel_start; /* 0x214 */ + uint32_t initrd_start; /* 0x218 */ + uint32_t initrd_size; /* 0x21c */ + uint8_t reserved13[4]; /* 0x220 */ + /* 2.01+ */ + uint16_t heap_end_ptr; /* 0x224 */ + uint8_t reserved14[2]; /* 0x226 */ + /* 2.02+ */ + uint32_t cmd_line_ptr; /* 0x228 */ + /* 2.03+ */ + uint32_t initrd_addr_max; /* 0x22c */ + uint8_t reserved15[160]; /* 0x230 */ + struct e820entry e820_map[E820MAX]; /* 0x2d0 */ + /* 0x550 */ +#define COMMAND_LINE_SIZE 256 +}; + +struct x86_linux_header { + uint8_t reserved1[0x1f1]; /* 0x000 */ + uint8_t setup_sects; /* 0x1f1 */ + uint16_t root_flags; /* 0x1f2 */ + uint8_t reserved2[6]; /* 0x1f4 */ + uint16_t vid_mode; /* 0x1fa */ + uint16_t root_dev; /* 0x1fc */ + uint16_t boot_sector_magic; /* 0x1fe */ + /* 2.00+ */ + uint8_t reserved3[2]; /* 0x200 */ + uint8_t header_magic[4]; /* 0x202 */ + uint16_t protocol_version; /* 0x206 */ + uint32_t realmode_swtch; /* 0x208 */ + uint16_t start_sys; /* 0x20c */ + uint16_t kver_addr; /* 0x20e */ + uint8_t type_of_loader; /* 0x210 */ + uint8_t loadflags; /* 0x211 */ + uint16_t setup_move_size; /* 0x212 */ + uint32_t code32_start; /* 0x214 */ + uint32_t ramdisk_image; /* 0x218 */ + uint32_t ramdisk_size; /* 0x21c */ + uint8_t reserved4[4]; /* 0x220 */ + /* 2.01+ */ + uint16_t heap_end_ptr; /* 0x224 */ + uint8_t reserved5[2]; /* 0x226 */ + /* 2.02+ */ + uint32_t cmd_line_ptr; /* 0x228 */ + /* 2.03+ */ + uint32_t initrd_addr_max; /* 0x22c */ + uint8_t tail[32*1024]; /* 0x230 */ +} __attribute__ ((packed)); + +#endif /* ASSEMBLY */ + +#endif /* X86_LINUX_H */ Added: trunk/util/mkelfImage/linux-ia64/Makefile =================================================================== --- trunk/util/mkelfImage/linux-ia64/Makefile (rev 0) +++ trunk/util/mkelfImage/linux-ia64/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,33 @@ +LIA64_DIR=linux-ia64 +LIA64_OBJ=$(OBJDIR)/$(LIA64_DIR) +LIA64_DEP=Makefile Makefile.conf $(LIA64_DIR)/Makefile + +$(LIA64_OBJ)/mkelf-linux-ia64.o: $(LIA64_DIR)/mkelf-linux-ia64.c $(LIA64_DIR)/convert.bin.c $(LIA64_DEP) + $(MKDIR) -p $(@D) + $(HOST_CC) $(HOST_CFLAGS) -c -g $< -o $@ + +ifdef IA64_CC + +$(LIA64_DIR)/convert.bin.c: $(LIA64_OBJ)/convert.bin $(OBJDIR)/bin/bin-to-hex $(LIA64_DEP) + $(MKDIR) -p $(@D) + $(OBJDIR)/bin/bin-to-hex < $(LIA64_OBJ)/convert.bin > $@ + +$(LIA64_OBJ)/convert.bin: $(LIA64_OBJ)/convert $(LIA64_DEP) + $(MKDIR) -p $(@D) + $(IA64_OBJCOPY) -O binary $< $@ + +CONVERT_LIA64_OBJS=$(LIA64_OBJ)/head.o $(LIA64_OBJ)/convert_params.o +$(LIA64_OBJ)/convert: $(LIA64_DIR)/convert.lds $(CONVERT_LIA64_OBJS) $(LIA64_DEP) + $(MKDIR) -p $(@D) + $(IA64_LD) $(IA64_LDFLAGS) -T $(LIA64_DIR)/convert.lds -o $@ $(CONVERT_LIA64_OBJS) + +$(LIA64_OBJ)/head.o: $(LIA64_DIR)/head.S $(LIA64_DIR)/convert.h + $(MKDIR) -p $(@D) + $(IA64_CPP) $(IA64_CFLAGS) -D ASSEMBLY $< | $(IA64_AS) $(IA64_ASFLAGS) -o $@ + +$(LIA64_OBJ)/convert_params.o: $(LIA64_DIR)/convert_params.c $(LIA64_DIR)/convert.h $(LIA64_DEP) + $(IA64_CC) $(IA64_CFLAGS) -c -o $@ $< + + +endif + Added: trunk/util/mkelfImage/linux-ia64/convert.bin.c =================================================================== --- trunk/util/mkelfImage/linux-ia64/convert.bin.c (rev 0) +++ trunk/util/mkelfImage/linux-ia64/convert.bin.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,310 @@ +0x00, 0x08, 0x19, 0x06, 0x80, 0x05, 0x20, 0x02, 0x00, 0x62, 0x00, 0xc0, 0x01, 0x00, 0xc0, 0x00, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x01, 0xe2, 0x8b, 0x6f, +0x0a, 0x08, 0x38, 0x1e, 0x05, 0x20, 0x30, 0x02, 0x80, 0x00, 0x42, 0x80, 0x04, 0xe0, 0x00, 0x84, +0x1c, 0x28, 0x41, 0x03, 0x00, 0x26, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0x0d, 0x00, 0x50, +0x0d, 0xe0, 0x00, 0x10, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0xe0, 0x81, 0x0d, 0x00, 0x98, +0x0a, 0x80, 0x00, 0x1e, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x20, 0x00, 0x09, 0x00, 0x07, +0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x08, 0x01, 0x55, 0x00, 0x00, 0x20, 0x0a, 0x00, 0x07, +0x1d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x10, 0x00, 0x80, 0x00, +0x00, 0x38, 0x28, 0x40, 0x86, 0x39, 0x00, 0x6a, 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, 0x04, 0x00, +0x13, 0x00, 0x00, 0x00, 0x01, 0x80, 0x41, 0x04, 0x00, 0xc2, 0x01, 0x00, 0xf0, 0xff, 0xff, 0x48, +0x00, 0x60, 0x3d, 0x1c, 0x80, 0x05, 0x00, 0x41, 0x30, 0x00, 0x42, 0x20, 0x02, 0x60, 0x00, 0x84, +0x0a, 0x60, 0x40, 0x18, 0x3f, 0x23, 0xd0, 0x02, 0x90, 0x44, 0x08, 0x60, 0x05, 0x00, 0xc4, 0x00, +0x00, 0x80, 0x9f, 0x20, 0xd9, 0x17, 0xa0, 0x42, 0x32, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0a, 0x80, 0x9b, 0x22, 0xd9, 0x17, 0x00, 0x2f, 0x41, 0xb2, 0x2f, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0a, 0x80, 0x93, 0x22, 0xd9, 0x17, 0x00, 0x1f, 0x41, 0xb2, 0x2f, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0a, 0x00, 0x88, 0x22, 0xd8, 0x11, 0x00, 0x08, 0x41, 0xb0, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x01, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x51, 0x00, +0x10, 0x38, 0x00, 0x1c, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x70, 0x00, 0x00, 0x43, +0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0xb8, 0x28, 0x00, 0xc0, 0x50, 0x72, 0x1c, 0xe6, +0x10, 0x70, 0x01, 0x1c, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x70, 0x00, 0x00, 0x43, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x48, 0xff, 0xff, 0x58, +0x0b, 0x00, 0x05, 0x40, 0x00, 0x21, 0xe0, 0x02, 0x80, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0xb8, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xb0, 0xff, 0xff, 0x4a, +0x00, 0x00, 0xb4, 0x48, 0x2a, 0x04, 0x00, 0x60, 0x01, 0x55, 0x00, 0x00, 0xb0, 0x0a, 0x00, 0x07, +0x11, 0x60, 0xc0, 0x19, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, +0x01, 0x00, 0x05, 0x40, 0x00, 0x21, 0x90, 0x82, 0x30, 0x00, 0x42, 0x00, 0xc2, 0x01, 0x00, 0x90, +0x0b, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x78, 0x50, 0x00, +0x11, 0x38, 0xcc, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0x80, 0x03, 0x00, 0x43, +0x1d, 0x38, 0xb0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0xf0, 0x80, 0xf0, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x03, 0x00, 0x43, +0x10, 0x38, 0xa0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x00, 0x03, 0x00, 0x43, +0x0b, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x78, 0x50, 0x00, +0x1d, 0x70, 0x80, 0x1c, 0x2e, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x38, 0xe0, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0x00, 0x02, 0x00, 0x43, +0x11, 0x38, 0x90, 0x1d, 0x86, 0x39, 0xe0, 0x00, 0x3c, 0x28, 0x80, 0x03, 0xa0, 0x00, 0x00, 0x43, +0x0a, 0x38, 0x8c, 0x1d, 0x86, 0xf9, 0xe1, 0x00, 0xa8, 0x00, 0xc2, 0x43, 0x85, 0x50, 0x01, 0x84, +0xcb, 0x08, 0x3c, 0x52, 0x80, 0xd5, 0xe1, 0x00, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0xe0, 0x08, 0x38, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x1d, 0x40, 0x41, 0x18, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x10, 0x30, 0xa0, 0x52, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xd0, 0xfe, 0xff, 0x4a, +0x0a, 0x70, 0x05, 0x50, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x05, 0x70, 0x51, 0x00, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xe8, 0xfd, 0xff, 0x58, +0x10, 0x30, 0xa0, 0x52, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xff, 0xff, 0x4a, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfe, 0xff, 0x48, +0x0a, 0x38, 0x70, 0x20, 0x86, 0xb1, 0xe1, 0x00, 0xa8, 0x00, 0xc2, 0xc3, 0x01, 0x50, 0x01, 0x84, +0xc2, 0x50, 0x21, 0x54, 0x00, 0xe1, 0xa1, 0x42, 0xa8, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0xc9, 0x70, 0x00, 0x1c, 0x10, 0xd0, 0x01, 0x01, 0x38, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x03, 0x00, 0x00, 0x00, 0x01, 0x80, 0x01, 0x01, 0x38, 0x2c, 0x00, 0xe0, 0x00, 0x01, 0x18, 0xc0, +0xe2, 0x70, 0xb4, 0x00, 0x00, 0xe4, 0x01, 0x01, 0x40, 0x0a, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0xea, 0x08, 0x38, 0x52, 0x80, 0x15, 0x80, 0x02, 0xa4, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x00, 0x30, 0x40, 0x00, 0xe1, 0x18, 0xf0, 0xf8, 0x43, 0x00, 0x29, 0x00, 0x00, 0x00, 0x04, 0x00, +0x05, 0x00, 0x00, 0x00, 0x01, 0x40, 0x66, 0x66, 0x66, 0x66, 0x66, 0xc0, 0x71, 0xd6, 0x30, 0x63, +0x0a, 0x38, 0x38, 0x00, 0xe1, 0x18, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x60, 0x00, 0x18, 0x0e, 0x77, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x18, 0x00, 0xe1, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x51, 0x70, 0xf4, 0x52, +0x0b, 0x70, 0x38, 0x1e, 0x05, 0x20, 0xf0, 0x70, 0x38, 0x22, 0x40, 0xe0, 0x00, 0x70, 0x18, 0xe4, +0x0b, 0x78, 0x3c, 0x00, 0x10, 0x20, 0xf0, 0x80, 0x3c, 0x0a, 0x40, 0x00, 0x02, 0x70, 0x00, 0x84, +0x1d, 0x78, 0xc0, 0x1e, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x08, 0x3c, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x80, 0xff, 0xff, 0x4a, +0x1d, 0x80, 0xfc, 0x53, 0x3f, 0x23, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x10, 0x30, 0xa0, 0x20, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xa0, 0xfe, 0xff, 0x4b, +0x09, 0x70, 0x00, 0x20, 0x00, 0x10, 0xf0, 0x00, 0xa0, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x09, 0xf8, 0x3f, 0x20, 0x81, 0x17, 0x10, 0x70, 0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x30, 0xa0, 0x20, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xff, 0xff, 0x4a, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x60, 0xfe, 0xff, 0x48, +0x02, 0x38, 0x70, 0x20, 0x86, 0x31, 0x20, 0x01, 0x3d, 0x58, 0xc0, 0xc3, 0x01, 0x50, 0x01, 0x84, +0xc9, 0x70, 0x00, 0x54, 0x00, 0xe1, 0xa1, 0x42, 0xa8, 0x00, 0x42, 0x43, 0x85, 0x50, 0x01, 0x84, +0xec, 0x88, 0x00, 0x1c, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0xd0, 0x88, 0x00, 0x1c, 0x10, 0x10, 0x70, 0x80, 0x00, 0x0c, 0xe1, 0x03, 0x20, 0xfe, 0xff, 0x4b, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x40, 0x24, 0x00, 0x00, 0xc2, 0x87, 0xfc, 0x8c, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x01, 0xe2, 0xff, 0x6f, +0x01, 0x78, 0x04, 0x1e, 0x00, 0x20, 0xe0, 0x70, 0x44, 0x80, 0x3c, 0xe0, 0x00, 0x01, 0x18, 0xc2, +0x03, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x3c, 0x1c, 0x2c, 0x20, 0xe0, 0x70, 0x3c, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x00, 0x1c, 0x00, 0x10, 0xe0, 0x90, 0x38, 0x1c, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x08, 0x38, 0x52, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x90, 0xff, 0xff, 0x4a, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfd, 0xff, 0x48, +0x02, 0x00, 0x05, 0x40, 0x00, 0x21, 0x00, 0x61, 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x00, 0x40, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x50, 0x00, +0x10, 0x38, 0xa0, 0x1d, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf0, 0xfc, 0xff, 0x4a, +0x00, 0x80, 0x10, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x00, 0x05, 0x40, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xd0, 0xfc, 0xff, 0x48, +0x02, 0x70, 0x00, 0x54, 0x00, 0x21, 0xa0, 0x42, 0xa8, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x40, 0x01, 0x1c, 0x18, 0x10, 0xe0, 0x00, 0xa0, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x38, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xe0, 0xfb, 0xff, 0x4a, +0x0a, 0x70, 0x05, 0x50, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x05, 0x70, 0x51, 0x00, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xf8, 0xfa, 0xff, 0x58, +0x0b, 0x70, 0x00, 0x50, 0x00, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0xc0, 0x01, 0x70, 0x50, 0x00, +0x10, 0x38, 0x00, 0x1c, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xd0, 0xff, 0xff, 0x4a, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x90, 0xfb, 0xff, 0x48, +0x00, 0x70, 0xfc, 0x45, 0x3f, 0x23, 0x20, 0x00, 0x04, 0x65, 0x00, 0x00, 0x01, 0x00, 0x01, 0x84, +0x1d, 0x38, 0x00, 0x44, 0x06, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x40, 0x00, 0x00, 0x43, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x70, 0x04, 0x55, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x1d, 0x70, 0x04, 0x42, 0x00, 0x14, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x08, 0x38, 0x10, 0x80, 0x15, 0x00, 0x00, 0x00, 0x02, 0x00, 0xa0, 0xf0, 0xff, 0xff, 0x48, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x10, 0x04, 0x55, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, +0x1d, 0x80, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x10, 0x30, 0x40, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x00, 0x00, 0x43, +0x00, 0x78, 0x00, 0x40, 0x00, 0x10, 0x00, 0x09, 0x40, 0x00, 0x42, 0x00, 0x14, 0x00, 0x01, 0x84, +0x0a, 0x70, 0x00, 0x42, 0x00, 0x10, 0x80, 0x80, 0x88, 0x12, 0x68, 0x20, 0x14, 0x08, 0x01, 0x84, +0x1d, 0x30, 0x38, 0x1e, 0x87, 0x38, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0xf3, 0x40, 0x3c, 0x1c, 0x05, 0xe0, 0x41, 0x04, 0x00, 0xc2, 0x01, 0x04, 0xd0, 0xff, 0xff, 0x4a, +0x11, 0x40, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, +0x1d, 0x78, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x10, 0x30, 0x3c, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x60, 0x00, 0x00, 0x43, +0x0b, 0x70, 0x80, 0x1e, 0x00, 0x20, 0xe0, 0x00, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x38, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x30, 0x00, 0x00, 0x43, +0x1d, 0x78, 0x04, 0x1e, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x30, 0x3c, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xc0, 0xff, 0xff, 0x4a, +0x10, 0x88, 0x00, 0x00, 0x00, 0x21, 0x60, 0x78, 0x88, 0x0e, 0xe8, 0x03, 0x80, 0x00, 0x00, 0x43, +0x01, 0x90, 0x3c, 0x40, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x84, 0x22, 0x00, 0x20, 0x00, 0x01, 0x38, 0x00, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x02, 0x00, 0x00, 0x00, 0x01, 0x00, 0xe0, 0x00, 0x40, 0x28, 0x00, 0xe0, 0x00, 0x70, 0x18, 0xe6, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x40, 0x00, 0x00, 0x43, +0x09, 0x88, 0x04, 0x22, 0x00, 0x21, 0x10, 0x80, 0x48, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x04, 0x00, +0x1d, 0x70, 0x44, 0x1e, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x10, 0x30, 0x38, 0x44, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xb0, 0xff, 0xff, 0x4a, +0x0b, 0x78, 0x3c, 0x22, 0x00, 0x20, 0x60, 0x78, 0x88, 0x0e, 0x68, 0x00, 0x00, 0x00, 0x04, 0x00, +0xeb, 0x78, 0xfc, 0x45, 0x3f, 0x23, 0xe0, 0x00, 0x3d, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x00, 0x00, 0x1c, 0x80, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, +0x00, 0x28, 0x25, 0x0c, 0x80, 0x05, 0x80, 0x02, 0x00, 0x10, 0x48, 0x40, 0x04, 0x00, 0x20, 0x90, +0x00, 0x08, 0x01, 0x40, 0x00, 0x21, 0x40, 0x02, 0x00, 0x62, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x60, 0x04, 0x10, 0x00, 0x68, +0x05, 0x18, 0x05, 0x46, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x84, 0xe3, 0xff, 0x6f, +0x19, 0x38, 0x05, 0x4e, 0x00, 0x20, 0x60, 0x02, 0x8c, 0x30, 0x20, 0x00, 0xa8, 0xfe, 0xff, 0x58, +0x01, 0x00, 0x01, 0x46, 0x18, 0x10, 0x00, 0x28, 0x01, 0x55, 0x00, 0x00, 0x40, 0x0a, 0x00, 0x07, +0x11, 0x10, 0x0c, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x88, 0xfe, 0xff, 0x48, +0x0a, 0x80, 0x24, 0x02, 0x80, 0x05, 0xf0, 0x40, 0x80, 0x00, 0x42, 0x00, 0x02, 0x01, 0x01, 0x84, +0x00, 0x88, 0x60, 0x40, 0x00, 0x21, 0x20, 0x01, 0x81, 0x00, 0x42, 0x80, 0xc2, 0x02, 0x01, 0x84, +0x09, 0x70, 0x20, 0x41, 0x00, 0x21, 0x30, 0x41, 0x81, 0x00, 0x42, 0x60, 0xe4, 0x02, 0x01, 0x84, +0x00, 0x20, 0xc1, 0x40, 0x00, 0x21, 0x50, 0x92, 0x81, 0x00, 0x42, 0xc0, 0x84, 0x03, 0x01, 0x84, +0x05, 0xe8, 0x00, 0x1e, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0x04, 0x10, 0x00, 0x68, +0x09, 0x38, 0x05, 0x4e, 0x00, 0x20, 0x80, 0x02, 0x38, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x00, 0x40, 0x20, 0x4f, 0x00, 0x21, 0x10, 0x42, 0x9c, 0x00, 0x42, 0x40, 0x04, 0x39, 0x01, 0x84, +0x00, 0xd0, 0x00, 0x20, 0x18, 0x10, 0xe0, 0xc1, 0x9c, 0x00, 0x42, 0xe0, 0x03, 0x3a, 0x01, 0x84, +0x09, 0xb0, 0x00, 0x22, 0x18, 0x10, 0x70, 0x01, 0x48, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x00, 0x70, 0x00, 0x4a, 0x08, 0x10, 0xc0, 0x41, 0x9d, 0x00, 0x42, 0x60, 0xc3, 0x3a, 0x01, 0x84, +0x00, 0x90, 0x00, 0x28, 0x08, 0x10, 0x80, 0x71, 0x9d, 0x00, 0x42, 0x80, 0x22, 0x3b, 0x01, 0x84, +0x09, 0x78, 0x00, 0x4c, 0x18, 0x10, 0x30, 0x01, 0x4c, 0x20, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x00, 0xc8, 0xc0, 0x4e, 0x00, 0x21, 0x50, 0xc1, 0x9d, 0x00, 0x42, 0xc0, 0x00, 0x40, 0x1d, 0xe4, +0x08, 0x80, 0x00, 0x46, 0x08, 0x10, 0x10, 0x01, 0x90, 0x10, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x02, 0x00, 0x38, 0x28, 0x88, 0x11, 0x40, 0x01, 0x9e, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x08, 0x00, 0x3c, 0x2a, 0x98, 0x11, 0x00, 0xe8, 0x84, 0x30, 0x23, 0xe0, 0x01, 0x04, 0x01, 0x84, +0x08, 0x00, 0x68, 0x44, 0x98, 0x11, 0x00, 0xb0, 0x78, 0x30, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, +0x08, 0x00, 0x5c, 0x3e, 0x98, 0x11, 0x00, 0x98, 0x70, 0x20, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, +0x08, 0x00, 0x48, 0x36, 0x88, 0x11, 0x00, 0x80, 0x60, 0x10, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x00, 0x44, 0x32, 0x88, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x40, 0x00, 0x00, 0x42, +0x0b, 0x70, 0x00, 0x10, 0x18, 0x10, 0x70, 0x00, 0x38, 0x0c, 0x72, 0x00, 0x00, 0x00, 0x04, 0x00, +0xe9, 0x70, 0x00, 0x1e, 0x18, 0xd0, 0x01, 0x40, 0x21, 0x30, 0x23, 0x00, 0x00, 0x00, 0x04, 0x00, +0xe0, 0x00, 0x38, 0x28, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x1d, 0x70, 0x00, 0x40, 0x18, 0x10, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x30, 0x00, 0x1c, 0x07, 0x39, 0x00, 0x02, 0x38, 0x00, 0x42, 0x83, 0x08, 0x00, 0x84, 0x02, +0x11, 0x10, 0x04, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x08, 0xfe, 0xff, 0x48, +0x00, 0x40, 0x31, 0x12, 0x80, 0x05, 0x10, 0x02, 0x00, 0x00, 0x42, 0xc0, 0x04, 0x00, 0x00, 0x84, +0x18, 0x20, 0x01, 0x00, 0x00, 0x21, 0xe0, 0x20, 0x80, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x20, +0x02, 0x10, 0x31, 0x40, 0x00, 0x21, 0x70, 0x02, 0x00, 0x62, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x00, 0x02, 0x39, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x30, 0x88, 0x40, 0x07, 0x34, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xd0, 0x00, 0x00, 0x43, +0x02, 0x70, 0x00, 0x44, 0x00, 0x21, 0x90, 0x62, 0x88, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x0b, 0x80, 0x10, 0x1c, 0x10, 0x14, 0xe0, 0x00, 0x38, 0x20, 0x20, 0xe0, 0x31, 0x80, 0x00, 0x84, +0x0b, 0x78, 0xf0, 0x1f, 0x2c, 0x22, 0xe0, 0x18, 0x38, 0x00, 0x42, 0xe0, 0x01, 0x78, 0x48, 0x00, +0x03, 0x70, 0xf0, 0x1d, 0x2c, 0x22, 0x30, 0x4a, 0x3d, 0x00, 0x40, 0xc0, 0x01, 0x70, 0x48, 0x00, +0x02, 0x28, 0x8d, 0x1c, 0x00, 0x20, 0xe0, 0x40, 0x88, 0x00, 0x42, 0xe0, 0x00, 0x2a, 0x19, 0xd0, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x70, 0x00, 0x00, 0x43, +0x10, 0x38, 0x00, 0x20, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x70, 0x01, 0x00, 0x42, +0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x60, 0x10, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, +0xd0, 0x20, 0x01, 0x46, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x30, 0x00, 0x00, 0x43, +0x11, 0x30, 0x08, 0x1c, 0x87, 0x35, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf0, 0x00, 0x00, 0x42, +0x0a, 0x30, 0x04, 0x1c, 0x87, 0xb9, 0x11, 0x02, 0x8c, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x10, 0x01, 0x4a, 0x00, 0x21, 0x60, 0x28, 0x81, 0x0e, 0x68, 0x03, 0x50, 0xff, 0xff, 0x4a, +0x02, 0x48, 0x00, 0x48, 0x08, 0x39, 0x70, 0x00, 0x98, 0x0c, 0x72, 0xe3, 0x11, 0x00, 0x00, 0x90, +0xe9, 0x78, 0x00, 0x00, 0x00, 0x21, 0xe2, 0x08, 0x00, 0x00, 0xc8, 0xc4, 0x01, 0x00, 0x00, 0x84, +0x0b, 0x70, 0x3c, 0x1c, 0x0c, 0x20, 0x60, 0x00, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, +0xe4, 0x50, 0x01, 0x48, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0x23, 0x05, 0xe4, 0xff, 0x6f, +0xea, 0x58, 0x01, 0x4c, 0x00, 0xe1, 0x91, 0x0a, 0xa4, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x78, 0xf5, 0xff, 0x5b, +0x10, 0x30, 0x00, 0x42, 0x07, 0x39, 0x00, 0x40, 0x01, 0x55, 0x00, 0x03, 0x40, 0x00, 0x00, 0x43, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x84, 0xe5, 0xff, 0x6f, +0x03, 0x00, 0x05, 0x40, 0x00, 0x20, 0x00, 0x38, 0x05, 0x80, 0x03, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x10, 0x08, 0x00, 0x80, 0x05, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x38, 0xf5, 0xff, 0x48, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x40, 0x01, 0x55, 0x00, 0x00, 0x70, 0x0a, 0x00, 0x07, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x08, 0x00, 0x84, 0x00, +0x1d, 0x30, 0x0c, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0xd0, 0x30, 0x01, 0x46, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x20, 0xff, 0xff, 0x4b, +0x0a, 0x30, 0x10, 0x1c, 0x87, 0xb9, 0x91, 0x02, 0x8c, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xf8, 0xfb, 0xff, 0x5b, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xf0, 0xfe, 0xff, 0x48, +0x10, 0x38, 0x28, 0x20, 0x86, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0xe0, 0xfe, 0xff, 0x4a, +0x05, 0x58, 0x29, 0x00, 0x00, 0xe4, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x40, 0x85, 0xe6, 0xff, 0x6f, +0x11, 0x50, 0x05, 0x54, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x28, 0xfa, 0xff, 0x58, +0x11, 0x70, 0x20, 0x44, 0x00, 0x21, 0x70, 0x00, 0x20, 0x0c, 0x73, 0x03, 0xb0, 0xfe, 0xff, 0x4a, +0x0b, 0x70, 0x00, 0x1c, 0x10, 0x10, 0x60, 0x10, 0x38, 0x0e, 0x73, 0x00, 0x00, 0x00, 0x04, 0x00, +0xc0, 0x90, 0x80, 0x46, 0x00, 0xa1, 0x31, 0x81, 0x8c, 0x00, 0x42, 0x83, 0x82, 0x19, 0x01, 0x84, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc3, 0x01, 0x10, 0x00, 0x68, +0xca, 0x70, 0x04, 0x1c, 0x00, 0xa0, 0xf1, 0x80, 0x38, 0x00, 0x42, 0x03, 0x82, 0x71, 0x00, 0x84, +0xc2, 0x88, 0x80, 0x1c, 0x00, 0xa1, 0xe1, 0x40, 0x39, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0xc9, 0x00, 0x48, 0x1e, 0x98, 0x91, 0xf1, 0x00, 0x8c, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0xc9, 0x00, 0x3c, 0x20, 0x98, 0x91, 0xf1, 0x00, 0x4c, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0xc9, 0x00, 0x3c, 0x22, 0x98, 0x91, 0xf1, 0x00, 0x50, 0x20, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0xd0, 0x00, 0x3c, 0x1c, 0x90, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x20, 0xfe, 0xff, 0x4b, +0x11, 0x30, 0x08, 0x1c, 0x87, 0x35, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x50, 0x00, 0x00, 0x42, +0x10, 0x30, 0x04, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x00, 0xfe, 0xff, 0x4a, +0x05, 0x78, 0x00, 0x46, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, +0x0b, 0x70, 0x04, 0x1c, 0x00, 0x20, 0xe0, 0x40, 0x38, 0x00, 0x42, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x00, 0x3c, 0x1c, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xd0, 0xfd, 0xff, 0x48, +0x11, 0x30, 0x0c, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x00, 0x03, 0x60, 0x00, 0x00, 0x43, +0x10, 0x30, 0x10, 0x1c, 0x87, 0x39, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0xb0, 0xfd, 0xff, 0x4a, +0x04, 0x50, 0x01, 0x46, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x20, 0x05, 0x10, 0x00, 0x68, +0x0b, 0x58, 0x21, 0x00, 0x00, 0x24, 0x90, 0x0a, 0xa4, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, +0x11, 0x48, 0xb1, 0x52, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x88, 0xf8, 0xff, 0x58, +0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0xfd, 0xff, 0x48, +0x05, 0x78, 0x00, 0x46, 0x18, 0xd0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, +0x1d, 0x70, 0x04, 0x1c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, +0x11, 0x70, 0xe0, 0x1c, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x70, 0xff, 0xff, 0x48, +0x00, 0x20, 0x19, 0x0a, 0x80, 0x05, 0x10, 0x81, 0x88, 0x00, 0x42, 0xe0, 0x01, 0x12, 0x01, 0x84, +0x08, 0x80, 0x00, 0x40, 0x10, 0x10, 0x20, 0xc2, 0x88, 0x00, 0x42, 0x60, 0x04, 0x00, 0xc4, 0x00, +0x05, 0x28, 0x01, 0x40, 0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xc0, 0x01, 0x10, 0x00, 0x68, +0x0a, 0x70, 0x04, 0x1c, 0x00, 0x20, 0x20, 0x01, 0x3a, 0x00, 0x42, 0x60, 0x82, 0x74, 0x00, 0x84, +0x04, 0x00, 0x3c, 0x1c, 0x98, 0x11, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x71, 0xe0, 0x83, 0x65, +0x0a, 0x78, 0x00, 0x22, 0x18, 0x10, 0x70, 0x70, 0x40, 0x0c, 0x71, 0x00, 0x00, 0x00, 0x04, 0x00, +0x09, 0x00, 0x3c, 0x24, 0x98, 0x11, 0xe0, 0x00, 0x88, 0x30, 0x20, 0x00, 0x00, 0x00, 0x04, 0x00, +0x10, 0x00, 0x38, 0x26, 0x98, 0x11, 0x00, 0x00, 0x00, 0x02, 0x80, 0x03, 0x50, 0x00, 0x00, 0x43, +0x11, 0x28, 0x01, 0x42, 0x00, 0x21, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x18, 0xfa, 0xff, 0x58, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x20, 0x01, 0x55, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, +0x05, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x01, 0x10, 0x00, 0x68, +0x11, 0x40, 0x04, 0x10, 0x00, 0x20, 0x00, 0x18, 0x05, 0x80, 0x03, 0x80, 0x08, 0x00, 0x84, 0x00, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x78, 0xfb, 0xff, 0x58, +0x11, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x48, +0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x4c, 0x6f, 0x61, 0x64, 0x65, 0x72, 0x3a, 0x20, 0x25, 0x73, 0x20, 0x76, 0x65, 0x72, 0x73, 0x69, +0x6f, 0x6e, 0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x46, 0x69, 0x72, 0x6d, 0x77, 0x61, 0x72, 0x65, +0x3a, 0x20, 0x25, 0x73, 0x0a, 0x00, 0x00, 0x00, 0x45, 0x74, 0x68, 0x65, 0x72, 0x62, 0x6f, 0x6f, +0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x00, 0x18, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x42, 0x4f, 0x4f, 0x54, 0x5f, 0x49, 0x4d, 0x41, 0x47, 0x45, 0x3d, 0x68, 0x65, 0x61, 0x64, 0x2e, +0x53, 0x20, 0x63, 0x6f, 0x6e, 0x73, 0x6f, 0x6c, 0x65, 0x3d, 0x74, 0x74, 0x79, 0x53, 0x30, 0x20, +0x69, 0x70, 0x3d, 0x64, 0x68, 0x63, 0x70, 0x20, 0x72, 0x6f, 0x6f, 0x74, 0x3d, 0x2f, 0x64, 0x65, +0x76, 0x2f, 0x6e, 0x66, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + Added: trunk/util/mkelfImage/linux-ia64/convert.h =================================================================== --- trunk/util/mkelfImage/linux-ia64/convert.h (rev 0) +++ trunk/util/mkelfImage/linux-ia64/convert.h 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,17 @@ +#define CMDLINE_MAX 1024 + +#ifdef ASSEMBLY +#define CONVERT_MAGIC 0xA5A5A5A5A5A5A5A5 +#else +#define CONVERT_MAGIC 0xA5A5A5A5A5A5A5A5ULL +#endif + +#ifndef ASSEMBLY +struct image_parameters { + uint64_t convert_magic; + uint64_t entry; + uint64_t initrd_start; + uint64_t initrd_size; + uint8_t cmdline[CMDLINE_MAX]; +}; +#endif Added: trunk/util/mkelfImage/linux-ia64/convert.lds =================================================================== --- trunk/util/mkelfImage/linux-ia64/convert.lds (rev 0) +++ trunk/util/mkelfImage/linux-ia64/convert.lds 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,36 @@ +OUTPUT_FORMAT("elf64-ia64-little") +OUTPUT_ARCH(ia64) + +ENTRY(_start) +SECTIONS { + /* . = 0; */ + . = 0x0000000004400000; + .text : { + _text = . ; + *(.text) + *(.rodaa) + *(.rodata.*) + _etext = . ; + } + . = ALIGN(16); + __gp = . + 0x200000; + .sdata : { + _sdata = . ; + *(.got.plt) + *(.got) + *(.srodata) + *(.sdata) + _esdata = . ; + } + .data : { + _data = . ; + *(.data) + *(.data.*) + *(.trailer) + _edata = . ; + } + /DISCARD/ : { + *(.comment) + *(.note) + } +} \ No newline at end of file Added: trunk/util/mkelfImage/linux-ia64/convert_params.c =================================================================== --- trunk/util/mkelfImage/linux-ia64/convert_params.c (rev 0) +++ trunk/util/mkelfImage/linux-ia64/convert_params.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,334 @@ +#include "stdint.h" +#include "limits.h" +#include <stdarg.h> +#include "elf.h" +#include "elf_boot.h" +#include "convert.h" + + +/* NOTE be very careful with static variables. No relocations are + * being performed so static variables with initialized pointers will + * point to the wrong locations, unless this file is loaded at just + * the right location. + */ +/* Data and functions in head.S */ +extern void uart_tx_byte(int c); + +static void putchar(int c) +{ + if (c == '\n') { + putchar('\r'); + } +#if 0 + uart_tx_byte(c); +#endif +} + +#define LONG_SHIFT ((int)((sizeof(unsigned long)*CHAR_BIT) - 4)) +#define INT_SHIFT ((int)((sizeof(unsigned int)*CHAR_BIT) - 4)) +#define SHRT_SHIFT ((int)((sizeof(unsigned short)*CHAR_BIT) - 4)) +#define CHAR_SHIFT ((int)((sizeof(unsigned char)*CHAR_BIT) - 4)) + +/************************************************************************** +PRINTF and friends + + Formats: + %x - 4 bytes int (8 hex digits, lower case) + %X - 4 bytes int (8 hex digits, upper case) + %lx - 8 bytes long (16 hex digits, lower case) + %lX - 8 bytes long (16 hex digits, upper case) + %hx - 2 bytes int (4 hex digits, lower case) + %hX - 2 bytes int (4 hex digits, upper case) + %hhx - 1 byte int (2 hex digits, lower case) + %hhX - 1 byte int (2 hex digits, upper case) + - optional # prefixes 0x or 0X + %d - decimal int + %c - char + %s - string + Note: width specification not supported +**************************************************************************/ +static void printf(const char *fmt, ...) +{ + va_list args; + char *p; + va_start(args, fmt); + for ( ; *fmt != '\0'; ++fmt) { + if (*fmt != '%') { + putchar(*fmt); + continue; + } + if (*++fmt == 's') { + for(p = va_arg(args, char *); *p != '\0'; p++) + putchar(*p); + } + else { /* Length of item is bounded */ + char tmp[40], *q = tmp; + int shift = INT_SHIFT; + if (*fmt == 'l') { + shift = LONG_SHIFT; + fmt++; + } + else if (*fmt == 'h') { + shift = SHRT_SHIFT; + fmt++; + if (*fmt == 'h') { + shift = CHAR_SHIFT; + fmt++; + } + } + + /* + * Before each format q points to tmp buffer + * After each format q points past end of item + */ + if ((*fmt | 0x20) == 'x') { + /* With x86 gcc, sizeof(long) == sizeof(int) */ + unsigned long h; + int ncase; + if (shift > INT_SHIFT) { + h = va_arg(args, unsigned long); + } else { + h = va_arg(args, unsigned int); + } + ncase = (*fmt & 0x20); + for ( ; shift >= 0; shift -= 4) + *q++ = "0123456789ABCDEF"[(h >> shift) & 0xF] | ncase; + } + else if (*fmt == 'd') { + char *r; + long i; + if (shift > INT_SHIFT) { + i = va_arg(args, long); + } else { + i = va_arg(args, int); + } + if (i < 0) { + *q++ = '-'; + i = -i; + } + p = q; /* save beginning of digits */ + do { + *q++ = '0' + (i % 10); + i /= 10; + } while (i); + /* reverse digits, stop in middle */ + r = q; /* don't alter q */ + while (--r > p) { + i = *r; + *r = *p; + *p++ = i; + } + } + else if (*fmt == 'c') + *q++ = va_arg(args, int); + else + *q++ = *fmt; + /* now output the saved string */ + for (p = tmp; p < q; ++p) + putchar(*p); + } + } + va_end(args); +} + +void *memcpy(void *vdest, void *vsrc, size_t size) +{ + unsigned char *dest = vdest, *src = vsrc; + size_t i; + for(i = 0; i < size; i++) { + *dest++ = *src++; + } + return dest; +} + +int memcmp(void *vs1, void *vs2, size_t size) +{ + unsigned char *s1 =vs1, *s2=vs2; + size_t i; + for(i = 0; i < size; i++, s1++, s2++) { + if (*s1 != *s2) + return *s1 - *s2; + } + return 0; + +} + +void strappend(char *dest, const char *src, size_t max) +{ + size_t len, i; + /* Walk to the end of the destination string */ + for(len = 0; len < max; len++) { + if (dest[len] == '\0') + break; + } + /* Walk through the source string and append it */ + for(i = 0; (i + len) < max; i++) { + if (src[i] == '\0') + break; + dest[len + i] = src[i]; + } + len = len + i; + /* Now null terminate the string */ + if (len >= max) { + len = max -1; + } + dest[len] = '\0'; +} + +static struct ia64_boot_param { + uint64_t command_line; /* physical address of command line arguments */ + uint64_t efi_systab; /* physical address of EFI system table */ + uint64_t efi_memmap; /* physical address of EFI memory map */ + uint64_t efi_memmap_size; /* size of EFI memory map */ + uint64_t efi_memdesc_size; /* size of an EFI memory map descriptor */ + uint32_t efi_memdesc_version; /* memory descriptor version */ + struct { + uint16_t num_cols; /* number of columns on console output device */ + uint16_t num_rows; /* number of rows on console output device */ + uint16_t orig_x; /* cursor's x position */ + uint16_t orig_y; /* cursor's y position */ + } console_info; + uint64_t fpswa; /* physical address of the fpswa interface */ + uint64_t initrd_start; + uint64_t initrd_size; +} bp = { 0, 0, 0, 0, 0, 0, { 80, 24, 0, 0 }, 0, 0, 0 }; + +static void append_command_line(char *arg) +{ + strappend((char *)bp.command_line, " ", CMDLINE_MAX); + strappend((char *)bp.command_line, arg, CMDLINE_MAX); +} + +static void convert_ia64_boot_params(struct ia64_boot_param *orig_bp) +{ + /* Copy the parameters I have no clue about */ + bp.efi_systab = orig_bp->efi_systab; + bp.efi_memmap = orig_bp->efi_memmap; + bp.efi_memmap_size = orig_bp->efi_memmap_size; + bp.efi_memdesc_size = orig_bp->efi_memdesc_size; + bp.efi_memdesc_version = orig_bp->efi_memdesc_version; + bp.console_info.num_cols = orig_bp->console_info.num_cols; + bp.console_info.num_rows = orig_bp->console_info.num_rows; + bp.console_info.orig_x = orig_bp->console_info.orig_x; + bp.console_info.orig_y = orig_bp->console_info.orig_y; + bp.fpswa = orig_bp->fpswa; + /* If a ramdisk was supplied and I didn't original have one, + * use it. + */ + if (orig_bp->initrd_size && (!bp.initrd_size)) { + bp.initrd_start = orig_bp->initrd_start; + bp.initrd_size = orig_bp->initrd_size; + } + /* If a command line was supplied append it */ + if (orig_bp->command_line) { + append_command_line((char *)(orig_bp->command_line)); + } +} + +static void convert_bhdr_params(Elf_Bhdr *bhdr) +{ + unsigned char *note, *end; + char *ldr_name, *ldr_version, *firmware; + + ldr_name = ldr_version = firmware = 0; + + note = ((char *)bhdr) + sizeof(*bhdr); + end = ((char *)bhdr) + bhdr->b_size; + while(note < end) { + Elf_Nhdr *hdr; + unsigned char *n_name, *n_desc, *next; + hdr = (Elf_Nhdr *)note; + n_name = note + sizeof(*hdr); + n_desc = n_name + ((hdr->n_namesz + 3) & ~3); + next = n_desc + ((hdr->n_descsz + 3) & ~3); + if (next > end) + break; +#if 0 + printf("n_type: %x n_name(%d): n_desc(%d): \n", + hdr->n_type, hdr->n_namesz, hdr->n_descsz); +#endif + + if (hdr->n_namesz == 0) { + switch(hdr->n_type) { + case EBN_FIRMWARE_TYPE: + firmware = n_desc; + break; + case EBN_BOOTLOADER_NAME: + ldr_name = n_desc; + break; + case EBN_BOOTLOADER_VERSION: + ldr_version = n_desc; + break; + case EBN_COMMAND_LINE: + append_command_line(n_desc); + break; + } + } + else if ((hdr->n_namesz == 10) && + (memcmp(n_name, "Etherboot", 10) == 0)) { + switch(hdr->n_type) { + case EB_IA64_SYSTAB: + { + uint64_t *systabp = (void *)n_desc; + bp.efi_systab = *systabp; + break; + } + case EB_IA64_FPSWA: + { + uint64_t *fpswap = (void *)n_desc; + bp.fpswa = *fpswap; + break; + } + case EB_IA64_CONINFO: + memcpy(&bp.console_info, n_desc, sizeof(bp.console_info)); + break; + case EB_IA64_MEMMAP: + { + struct efi_mem_map { + uint64_t map_size; + uint64_t map_key; + uint64_t descriptor_size; + uint64_t descriptor_version; + uint8_t map[40]; + } *map = (void *)n_desc; + bp.efi_memmap = (uint64_t)&map->map; + bp.efi_memmap_size = map->map_size; + bp.efi_memdesc_size = map->descriptor_size; + bp.efi_memdesc_version = map->descriptor_version; + break; + } + } + } + note = next; + } + if (ldr_name && ldr_version) { + printf("Loader: %s version: %s\n", + ldr_name, ldr_version); + } + if (firmware) { + printf("Firmware: %s\n", + firmware); + } +} + +void *convert_params(unsigned long arg1, unsigned long r28, + struct image_parameters *params) +{ + struct ia64_boot_param *orig_bp; + Elf_Bhdr *bhdr = (Elf_Bhdr*)arg1; + + /* handle the options I can easily deal with */ + bp.command_line = (unsigned long)&params->cmdline; + bp.initrd_start = params->initrd_start; + bp.initrd_size = params->initrd_size; + + orig_bp = (struct ia64_boot_param *)r28; + if (bhdr->b_signature == 0x0E1FB007) { + convert_bhdr_params(bhdr); + } + else { + convert_ia64_boot_params(orig_bp); + } + + return &bp; +} Added: trunk/util/mkelfImage/linux-ia64/head.S =================================================================== --- trunk/util/mkelfImage/linux-ia64/head.S (rev 0) +++ trunk/util/mkelfImage/linux-ia64/head.S 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,235 @@ +#define ASSEMBLY 1 + + .text + +#include "convert.h" + + .globl _start + .proc _start +_start: + alloc loc0=ar.pfs,1,2,3,0 /* in, local, out, rotating */ + mov loc1=rp + mov r14=ip /* Get the address of _start, I'm in the first bundle */ + movl r15=@gprel(_start) + ;; + sub gp=r14,r15 /* gp = _start - @gprel(_start), current value of gp */ + ;; + mov out0=in0 + mov out1=r28 + add out2=@gprel(params),gp + br.call.sptk.few rp=convert_params + + + mov r28=r8 + add r15=@gprel(entry), gp + ;; + ld8 r16=[r15] + ;; + mov b1=r16 + mov ar.pfs=loc0 + mov rp=loc1 + ;; + br.cond.sptk.few b1 + + .size _start, . - _start + .endp _start + + +#if 0 + +/* Base Address */ +#define UART_BASE 0x00000000f8030000 +#define UART_BAUD 9600 + +/* Data */ +#define UART_RBR 0x00 +#define UART_TBR 0x00 +/* Control */ +#define UART_IER 0x01 +#define UART_IIR 0x02 +#define UART_FCR 0x02 +#define UART_LCR 0x03 +#define UART_MCR 0x04 + +#define UART_DLL 0x00 +#define UART_DLM 0x01 +/* Status */ +#define UART_LSR 0x05 +#define UART_MSR 0x06 +#define UART_SCR 0x07 + +#define UART_PHYS_BASE (0x8000000000000000|UART_BASE) +#define UART_DIV (115200/UART_BAUD) +#define UART_DIV_LO (UART_DIV&0xFF) +#define UART_DIV_HI ((UART_DIV >> 8)&0xFF) + +#if ((115200%UART_BAUD) != 0) +#error Bad uart baud rate +#endif + +/* NOTE: As these are debugging functions, they do not consume any + * space on the register stack, and instead rely entirely on + * scratch registers for the registers they use. + */ +uart_init: + /* set the UART_BASE */ + movl r31=UART_PHYS_BASE + ;; + + /* disable interrupts */ + add r30=UART_IER,r31 + mov r29=0x00 + ;; + st1 [r30]=r29 + + /* enable fifos */ + add r30=UART_FCR,r31 + mov r29=0x01 + ;; + st1 [r30]=r29 + + /* Set Baud Rate Divisor to UART_BAUD */ + add r30=UART_LCR,r31 + mov r29=0x83 + ;; + st1 [r30]=r29 + + add r30=UART_DLL,r31 + mov r29=UART_DIV_LO + ;; + st1 [r30]=r29 + + add r30=UART_DLM,r31 + mov r29=UART_DIV_HI + ;; + st1 [r30]=r29 + + add r30=UART_LCR,r31 + mov r29=0x03 + ;; + st1 [r30]=r29 + + br.ret.sptk.few rp + + .proc uart_tx_byte + .globl uart_tx_byte +uart_tx_byte: + /* set the UART_PHYS_BASE */ + movl r31=UART_PHYS_BASE + ;; +__uart_tx_byte: + /* Wait until the UART can hold another byte */ + add r30=UART_LSR,r31 + ;; +9: ld1.acq.nta r29=[r30] + ;; + and r29=0x20,r29 + ;; + cmp.eq p63,p0=0,r29 +(p63) br.cond.sptk.few 9b + + /* Transmit the byte */ + add r30=UART_TBR,r31 + ;; + st1.rel.nta [r30]=r32 + ;; + + /* Wait until the UART is empty to be certain the byte is flushed */ + add r30=UART_LSR,r31 + ;; +9: ld1.acq.nta r29=[r30] + ;; + and r29=0x40,r29 + ;; + cmp.eq p63,p0=0,r29 +(p63) br.cond.sptk.few 9b + ;; + br.ret.sptk.few rp + .endp uart_tx_byte + +__uart_tx_hex_char: + cmp.ltu p62,p63=9,r32 + ;; +(p63) add r32=48,r32 /* digits*/ +(p62) add r32=55,r32 /* letters */ + br.cond.sptk.few __uart_tx_byte + +uart_tx_hex64: + /* set the UART_bASE */ + movl r31=UART_PHYS_BASE + /* skip r28 */ + mov r27=rp + mov r26=ar.pfs + mov r25=r32 + ;; + extr.u r32=r25,60,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,56,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,52,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,48,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,44,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,40,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,36,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,32,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,28,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,24,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,20,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,16,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,12,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,8,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,4,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + extr.u r32=r25,0,4 + br.call.sptk.few rp=__uart_tx_hex_char + ;; + mov ar.pfs = r26 + mov rp = r27 + ;; + br.ret.sptk.few rp +#endif + + .section ".trailer", "a" + /* Constants set at build time, these are at the very end of my image */ + .balign 16 + .global params +params: +convert_magic: + .quad CONVERT_MAGIC +entry: + .quad 0 +initrd_start: + .quad 0 +initrd_size: + .quad 0 +cmdline: + .asciz "BOOT_IMAGE=head.S console=ttyS0 ip=dhcp root=/dev/nfs" + .org cmdline + 1024, 0 +cmdline_end: Added: trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c =================================================================== --- trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c (rev 0) +++ trunk/util/mkelfImage/linux-ia64/mkelf-linux-ia64.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,272 @@ +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#define _GNU_SOURCE +#include <getopt.h> +#include "elf.h" +#include "elf_boot.h" +#include "convert.h" +#include "mkelfImage.h" + +static unsigned char payload[] = { +#include "convert.bin.c" +}; + +char *linux_ia64_probe(char *kernel_buf, off_t kernel_size) +{ + Elf64_Ehdr *ehdr; + Elf64_Phdr *phdr; + int i; + int phdrs; + ehdr = (Elf64_Ehdr *)kernel_buf; + if ( + (ehdr->e_ident[EI_MAG0] != ELFMAG0) || + (ehdr->e_ident[EI_MAG1] != ELFMAG1) || + (ehdr->e_ident[EI_MAG2] != ELFMAG2) || + (ehdr->e_ident[EI_MAG3] != ELFMAG3)) { + return "No ELF signature found on kernel\n"; + } + if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) { + return "Not a 64bit ELF kernel\n"; + } + if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { + return "Not a little endian ELF kernel\n"; + } + if (le16_to_cpu(ehdr->e_type) != ET_EXEC) { + return "Not an executable kernel\n"; + } + if (le16_to_cpu(ehdr->e_machine) != EM_IA_64) { + return "Not an ia64 kernel\n"; + } + if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) || + (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) { + return "Kernel not using ELF version 1.\n"; + } + if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) { + return "Kernel uses bad program header size.\n"; + } + phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); + phdrs = 0; + for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { + if (le32_to_cpu(phdr[i].p_type) != PT_LOAD) + continue; + phdrs++; + } + if (phdrs == 0) { + return "No PT_LOAD segments!\n"; + } + return 0; +} + +struct kernel_info +{ + int phdrs; + char *kernel_buf; + Elf64_Ehdr *ehdr; + Elf64_Phdr *phdr; + uint64_t entry; + char *version; +}; + +static void parse_kernel(struct kernel_info *info, + char *kernel_buf, size_t kernel_size) +{ + Elf64_Ehdr *ehdr; + Elf64_Phdr *phdr; + int i; + int phdrs; + ehdr = (Elf64_Ehdr *)kernel_buf; + phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff)); + phdrs = 0; + for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) { + if (le16_to_cpu(phdr[i].p_type) != PT_LOAD) + continue; + phdrs++; + } + if (phdrs == 0) { + die("No PT_LOAD segments!\n"); + } + info->kernel_buf = kernel_buf; + info->ehdr = ehdr; + info->phdrs = phdrs; + info->phdr = phdr; + info->entry = le64_to_cpu(ehdr->e_entry); + info->version = "unknown"; +} + +static int populate_kernel_phdrs(struct kernel_info *info, struct memelfphdr *phdr) +{ + uint64_t paddr; + int i; + paddr = 0; + for(i = 0; i < info->phdrs; i++) { + Elf64_Phdr *hdr; + int j; + hdr = 0; + for(j = 0; j < le16_to_cpu(info->ehdr->e_phnum); j++) { + if (le16_to_cpu(info->phdr[j].p_type != PT_LOAD)) { + continue; + } + if (paddr > le64_to_cpu(info->phdr[j].p_paddr)) { + continue; + } + if (hdr && + le64_to_cpu(hdr->p_paddr) < + le64_to_cpu(info->phdr[j].p_paddr)) { + continue; + } + hdr = info->phdr + j; + } + if (!hdr) { + die("Expected %d phdrs found %d!", info->phdrs, i); + } + phdr[i].p_paddr = le64_to_cpu(hdr->p_paddr); + phdr[i].p_vaddr = le64_to_cpu(hdr->p_vaddr); + phdr[i].p_filesz = le64_to_cpu(hdr->p_filesz); + phdr[i].p_memsz = le64_to_cpu(hdr->p_memsz); + phdr[i].p_data = info->kernel_buf + le64_to_cpu(hdr->p_offset); + paddr = phdr[i].p_paddr + phdr[i].p_memsz; + } + return i; +} + + +void linux_ia64_usage(void) +{ + printf( + " --command-line=<string> Set the command line to <string>\n" + " --append=<string> Set the command line to <string>\n" + " --initrd=<filename> Set the initrd to <filename>\n" + " --ramdisk=<filename> Set the initrd to <filename>\n" + ); + return; +} + +#define OPT_CMDLINE OPT_MAX+0 +#define OPT_RAMDISK OPT_MAX+1 + +int linux_ia64_mkelf(int argc, char **argv, + struct memelfheader *ehdr, char *kernel_buf, off_t kernel_size) +{ + const char *ramdisk, *cmdline; + char *payload_buf, *ramdisk_buf; + off_t payload_size, ramdisk_size; + struct memelfphdr *phdr; + struct memelfnote *note; + struct kernel_info kinfo; + struct image_parameters *params; + int index; + + int opt; + static const struct option options[] = { + MKELF_OPTIONS + { "command-line", 1, 0, OPT_CMDLINE }, + { "append", 1, 0, OPT_CMDLINE }, + { "initrd", 1, 0, OPT_RAMDISK }, + { "ramdisk", 1, 0, OPT_RAMDISK }, + { 0 , 0, 0, 0 }, + }; + static const char short_options[] = "HV"; + + ramdisk = 0; + cmdline=""; + + while((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { + switch(opt) { + case '?': + error("Unknown option %s\n", argv[optind]); + break; + case OPT_RAMDISK: + ramdisk = optarg; + break; + case OPT_CMDLINE: + cmdline = optarg; + break; + default: + break; + } + } + ehdr->ei_class = ELFCLASS64; + ehdr->ei_data = ELFDATA2LSB; + ehdr->e_type = ET_EXEC; + ehdr->e_machine = EM_IA_64; + + /* locate the payload buffer */ + payload_buf = payload; + payload_size = sizeof(payload); + + /* slurp the input files */ + ramdisk_buf = slurp_file(ramdisk, &ramdisk_size); + + /* parse the kernel */ + parse_kernel(&kinfo, kernel_buf, kernel_size); + + /* Find the parameters */ + params = (void *)(payload_buf + (payload_size - sizeof(*params))); + + /* A sanity check against bad versions of binutils */ + if (params->convert_magic != CONVERT_MAGIC) { + die("Internal error convert_magic %16llx != %16llx\n", + (unsigned long long)(params->convert_magic), CONVERT_MAGIC); + } + + /* Copy the command line */ + strncpy(params->cmdline, cmdline, sizeof(params->cmdline)); + params->cmdline[sizeof(params->cmdline)-1]= '\0'; + + /* Add a program header for the note section */ + phdr = add_program_headers(ehdr, 2 + kinfo.phdrs + (ramdisk_size?1:0)); + + /* Fill in the program headers*/ + phdr[0].p_type = PT_NOTE; + + /* Fill in the kernel program headers */ + index = 1 + populate_kernel_phdrs(&kinfo, phdr + 1); + + /* Fill in the converter program header */ + phdr[index].p_paddr = roundup(phdr[index -1].p_paddr + phdr[index -1].p_memsz, 16); + phdr[index].p_vaddr = phdr[index].p_paddr; + phdr[index].p_filesz = payload_size; + phdr[index].p_memsz = payload_size; + phdr[index].p_data = payload_buf; + index++; + + /* Set the start location */ + params->entry = kinfo.entry; + ehdr->e_entry = phdr[index -1].p_paddr; + + + /* Fill in the ramdisk program header */ + params->initrd_start = params->initrd_size = 0; + if (ramdisk_size) { + phdr[index].p_paddr = roundup(phdr[index -1].p_paddr + phdr[index -1].p_memsz, 16); + phdr[index].p_vaddr = phdr[index].p_paddr; + phdr[index].p_filesz = ramdisk_size; + phdr[index].p_memsz = ramdisk_size; + phdr[index].p_data = ramdisk_buf; + params->initrd_start = phdr[index].p_paddr; + params->initrd_size = phdr[index].p_filesz; + index++; + } + + /* Compute the elf notes */ + note = add_notes(ehdr, 3); + note[0].n_type = EIN_PROGRAM_NAME; + note[0].n_name = "ELFBoot"; + note[0].n_desc = "Linux"; + note[0].n_descsz = strlen(note[0].n_desc)+1; + + note[1].n_type = EIN_PROGRAM_VERSION; + note[1].n_name = "ELFBoot"; + note[1].n_desc = kinfo.version; + note[1].n_descsz = strlen(note[1].n_desc)+1; + + note[2].n_type = EIN_PROGRAM_CHECKSUM; + note[2].n_name = "ELFBoot"; + note[2].n_desc = 0; + note[2].n_descsz = 2; + + return 0; +} Added: trunk/util/mkelfImage/main/Makefile =================================================================== --- trunk/util/mkelfImage/main/Makefile (rev 0) +++ trunk/util/mkelfImage/main/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,18 @@ +MKELF_OBJS=$(OBJDIR)/main/mkelfImage.o \ + $(OBJDIR)/linux-i386/mkelf-linux-i386.o \ + $(OBJDIR)/linux-ia64/mkelf-linux-ia64.o + +$(OBJDIR)/sbin/mkelfImage: $(MKELF_OBJS) $(DEPS) + $(MKDIR) -p $(@D) + $(HOST_CC) $(HOST_CFLAGS) $(MKELF_OBJS) -o $@ $(LIBS) + +$(OBJDIR)/main/mkelfImage.o: main/mkelfImage.c include/mkelfImage.h $(DEPS) + $(MKDIR) -p $(@D) + $(HOST_CC) $(HOST_CFLAGS) -c $< -o $@ + +$(OBJDIR)/man/man8/mkelfImage.8: main/mkelfImage.man + $(MKDIR) -p $(@D) + $(SED) \ + -e 's,^.TH MKELFIMAGE 8 "RELEASE_DATE" "VERSION"$$,.TH MKELFIMAGE 8 "$(RELEASE_DATE)" "$(VERSION)",' \ + $< > $@ + $(CP) $< $@ Added: trunk/util/mkelfImage/main/mkelfImage.c =================================================================== --- trunk/util/mkelfImage/main/mkelfImage.c (rev 0) +++ trunk/util/mkelfImage/main/mkelfImage.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,663 @@ +#include <stdarg.h> +#include <errno.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> +#include <stdio.h> +#include <getopt.h> +#ifdef HAVE_ZLIB_H +#include <zlib.h> +#endif +#include "elf.h" +#include "elf_boot.h" +#include "mkelfImage.h" + +static struct file_type file_type[] = { + { "linux-i386", linux_i386_probe, linux_i386_mkelf, linux_i386_usage }, + { "bzImage-i386", bzImage_i386_probe, linux_i386_mkelf, linux_i386_usage }, + { "vmlinux-i386", vmlinux_i386_probe, linux_i386_mkelf, linux_i386_usage }, + { "linux-ia64", linux_ia64_probe, linux_ia64_mkelf, linux_ia64_usage }, +}; +static const int file_types = sizeof(file_type)/sizeof(file_type[0]); + +void die(char *fmt, ...) +{ + va_list args; + va_start(args, fmt); + vfprintf(stderr, fmt, args); + va_end(args); + exit(1); +} + + + +/************************************************************************** +IPCHKSUM - Checksum IP Header +**************************************************************************/ +uint16_t ipchksum(const void *data, unsigned long length) +{ + unsigned long sum; + unsigned long i; + const uint8_t *ptr; + + /* In the most straight forward way possible, + * compute an ip style checksum. + */ + sum = 0; + ptr = data; + for(i = 0; i < length; i++) { + unsigned long value; + value = ptr[i]; + if (i & 1) { + value <<= 8; + } + /* Add the new value */ + sum += value; + /* Wrap around the carry */ + if (sum > 0xFFFF) { + sum = (sum + (sum >> 16)) & 0xFFFF; + } + } + return (~cpu_to_le16(sum)) & 0xFFFF; +} + +uint16_t add_ipchksums(unsigned long offset, uint16_t sum, uint16_t new) +{ + unsigned long checksum; + sum = ~sum & 0xFFFF; + new = ~new & 0xFFFF; + if (offset & 1) { + /* byte swap the sum if it came from an odd offset + * since the computation is endian independant this + * works. + */ + new = bswap_16(new); + } + checksum = sum + new; + if (checksum > 0xFFFF) { + checksum -= 0xFFFF; + } + return (~checksum) & 0xFFFF; +} + +void *xmalloc(size_t size, const char *name) +{ + void *buf; + buf = malloc(size); + if (!buf) { + die("Cannot malloc %ld bytes to hold %s: %s\n", + size + 0UL, name, strerror(errno)); + } + return buf; +} + +void *xrealloc(void *ptr, size_t size, const char *name) +{ + void *buf; + buf = realloc(ptr, size); + if (!buf) { + die("Cannot realloc %ld bytes to hold %s: %s\n", + size + 0UL, name, strerror(errno)); + } + return buf; +} + + +char *slurp_file(const char *filename, off_t *r_size) +{ + int fd; + char *buf; + off_t size, progress; + ssize_t result; + struct stat stats; + + + if (!filename) { + *r_size = 0; + return 0; + } + fd = open(filename, O_RDONLY); + if (fd < 0) { + die("Cannot open `%s': %s\n", + filename, strerror(errno)); + } + result = fstat(fd, &stats); + if (result < 0) { + die("Cannot stat: %s: %s\n", + filename, strerror(errno)); + } + size = stats.st_size; + *r_size = size; + buf = xmalloc(size, filename); + progress = 0; + while(progress < size) { + result = read(fd, buf + progress, size - progress); + if (result < 0) { + if ((errno == EINTR) || (errno == EAGAIN)) + continue; + die("read on %s of %ld bytes failed: %s\n", + filename, (size - progress)+ 0UL, strerror(errno)); + } + progress += result; + } + result = close(fd); + if (result < 0) { + die("Close of %s failed: %s\n", + filename, strerror(errno)); + } + return buf; +} + +#if HAVE_ZLIB_H +char *slurp_decompress_file(const char *filename, off_t *r_size) +{ + gzFile fp; + int errnum; + const char *msg; + char *buf; + off_t size, allocated; + ssize_t result; + + if (!filename) { + *r_size = 0; + return 0; + } + fp = gzopen(filename, "rb"); + if (fp == 0) { + msg = gzerror(fp, &errnum); + if (errnum == Z_ERRNO) { + msg = strerror(errno); + } + die("Cannot open `%s': %s\n", filename, msg); + } + size = 0; + allocated = 65536; + buf = xmalloc(allocated, filename); + do { + if (size == allocated) { + allocated <<= 1; + buf = xrealloc(buf, allocated, filename); + } + result = gzread(fp, buf + size, allocated - size); + if (result < 0) { + if ((errno == EINTR) || (errno == EAGAIN)) + continue; + + msg = gzerror(fp, &errnum); + if (errnum == Z_ERRNO) { + msg = strerror(errno); + } + die ("read on %s of %ld bytes failed: %s\n", + filename, (allocated - size) + 0UL, msg); + } + size += result; + } while(result > 0); + result = gzclose(fp); + if (result != Z_OK) { + msg = gzerror(fp, &errnum); + if (errnum == Z_ERRNO) { + msg = strerror(errno); + } + die ("Close of %s failed: %s\n", filename, msg); + } + *r_size = size; + return buf; +} +#else +char *slurp_decompress_file(const char *filename, off_t *r_size) +{ + return slurp_file(filename, r_size); +} +#endif + +struct memelfphdr *add_program_headers(struct memelfheader *ehdr, int count) +{ + struct memelfphdr *phdr; + int i; + ehdr->e_phnum = count; + ehdr->e_phdr = phdr = xmalloc(count *sizeof(*phdr), "Program headers"); + /* Set the default values */ + for(i = 0; i < count; i++) { + phdr[i].p_type = PT_LOAD; + phdr[i].p_flags = PF_R | PF_W | PF_X; + phdr[i].p_vaddr = 0; + phdr[i].p_paddr = 0; + phdr[i].p_filesz = 0; + phdr[i].p_memsz = 0; + phdr[i].p_data = 0; + } + return phdr; +} + +struct memelfnote *add_notes(struct memelfheader *ehdr, int count) +{ + struct memelfnote *notes; + ehdr->e_notenum = count; + ehdr->e_notes = notes = xmalloc(count *sizeof(*notes), "Notes"); + memset(notes, 0, count *sizeof(*notes)); + return notes; +} + +static int sizeof_notes(struct memelfnote *note, int notes) +{ + int size; + int i; + + size = 0; + for(i = 0; i < notes; i++) { + size += sizeof(Elf_Nhdr); + size += roundup(strlen(note[i].n_name)+1, 4); + size += roundup(note[i].n_descsz, 4); + } + return size; +} + +static uint16_t cpu_to_elf16(struct memelfheader *ehdr, uint16_t val) +{ + if (ehdr->ei_data == ELFDATA2LSB) { + return cpu_to_le16(val); + } + else if (ehdr->ei_data == ELFDATA2MSB) { + return cpu_to_be16(val); + } + die("Uknown elf layout in cpu_to_elf16"); + return 0; +} + +static uint32_t cpu_to_elf32(struct memelfheader *ehdr, uint32_t val) +{ + if (ehdr->ei_data == ELFDATA2LSB) { + return cpu_to_le32(val); + } + else if (ehdr->ei_data == ELFDATA2MSB) { + return cpu_to_be32(val); + } + die("Uknown elf layout in cpu_to_elf32"); + return 0; +} + +static uint64_t cpu_to_elf64(struct memelfheader *ehdr, uint64_t val) +{ + if (ehdr->ei_data == ELFDATA2LSB) { + return cpu_to_le64(val); + } + else if (ehdr->ei_data == ELFDATA2MSB) { + return cpu_to_be64(val); + } + die("Uknown elf layout in cpu_to_elf64"); + return 0; +} + +static void serialize_notes(char *buf, struct memelfheader *ehdr) +{ + struct Elf_Nhdr hdr; + struct memelfnote *note; + int notes; + size_t size, offset; + int i; + + /* Clear the buffer */ + note = ehdr->e_notes; + notes = ehdr->e_notenum; + size = sizeof_notes(note, notes); + memset(buf, 0, size); + + /* Write the Elf Notes */ + offset = 0; + for(i = 0; i < notes; i++) { + /* Compute the note header */ + size_t n_namesz; + n_namesz = strlen(note[i].n_name) +1; + hdr.n_namesz = cpu_to_elf32(ehdr, n_namesz); + hdr.n_descsz = cpu_to_elf32(ehdr, note[i].n_descsz); + hdr.n_type = cpu_to_elf32(ehdr, note[i].n_type); + + /* Copy the note into the buffer */ + memcpy(buf + offset, &hdr, sizeof(hdr)); + offset += sizeof(hdr); + memcpy(buf + offset, note[i].n_name, n_namesz); + offset += roundup(n_namesz, 4); + memcpy(buf + offset, note[i].n_desc, note[i].n_descsz); + offset += roundup(note[i].n_descsz, 4); + + } +} +static void serialize_ehdr(char *buf, struct memelfheader *ehdr) +{ + if (ehdr->ei_class == ELFCLASS32) { + Elf32_Ehdr *hdr = (Elf32_Ehdr *)buf; + hdr->e_ident[EI_MAG0] = ELFMAG0; + hdr->e_ident[EI_MAG1] = ELFMAG1; + hdr->e_ident[EI_MAG2] = ELFMAG2; + hdr->e_ident[EI_MAG3] = ELFMAG3; + hdr->e_ident[EI_CLASS] = ehdr->ei_class; + hdr->e_ident[EI_DATA] = ehdr->ei_data; + hdr->e_ident[EI_VERSION] = EV_CURRENT; + hdr->e_type = cpu_to_elf16(ehdr, ehdr->e_type); + hdr->e_machine = cpu_to_elf16(ehdr, ehdr->e_machine); + hdr->e_version = cpu_to_elf32(ehdr, EV_CURRENT); + hdr->e_entry = cpu_to_elf32(ehdr, ehdr->e_entry); + hdr->e_phoff = cpu_to_elf32(ehdr, sizeof(*hdr)); + hdr->e_shoff = cpu_to_elf32(ehdr, 0); + hdr->e_flags = cpu_to_elf32(ehdr, ehdr->e_flags); + hdr->e_ehsize = cpu_to_elf16(ehdr, sizeof(*hdr)); + hdr->e_phentsize = cpu_to_elf16(ehdr, sizeof(Elf32_Phdr)); + hdr->e_phnum = cpu_to_elf16(ehdr, ehdr->e_phnum); + hdr->e_shentsize = cpu_to_elf16(ehdr, 0); + hdr->e_shnum = cpu_to_elf16(ehdr, 0); + hdr->e_shstrndx = cpu_to_elf16(ehdr, 0); + } + else if (ehdr->ei_class == ELFCLASS64) { + Elf64_Ehdr *hdr = (Elf64_Ehdr *)buf; + hdr->e_ident[EI_MAG0] = ELFMAG0; + hdr->e_ident[EI_MAG1] = ELFMAG1; + hdr->e_ident[EI_MAG2] = ELFMAG2; + hdr->e_ident[EI_MAG3] = ELFMAG3; + hdr->e_ident[EI_CLASS] = ehdr->ei_class; + hdr->e_ident[EI_DATA] = ehdr->ei_data; + hdr->e_ident[EI_VERSION] = EV_CURRENT; + hdr->e_type = cpu_to_elf16(ehdr, ehdr->e_type); + hdr->e_machine = cpu_to_elf16(ehdr, ehdr->e_machine); + hdr->e_version = cpu_to_elf32(ehdr, EV_CURRENT); + hdr->e_entry = cpu_to_elf64(ehdr, ehdr->e_entry); + hdr->e_phoff = cpu_to_elf64(ehdr, sizeof(*hdr)); + hdr->e_shoff = cpu_to_elf64(ehdr, 0); + hdr->e_flags = cpu_to_elf32(ehdr, ehdr->e_flags); + hdr->e_ehsize = cpu_to_elf16(ehdr, sizeof(*hdr)); + hdr->e_phentsize = cpu_to_elf16(ehdr, sizeof(Elf64_Phdr)); + hdr->e_phnum = cpu_to_elf16(ehdr, ehdr->e_phnum); + hdr->e_shentsize = cpu_to_elf16(ehdr, 0); + hdr->e_shnum = cpu_to_elf16(ehdr, 0); + hdr->e_shstrndx = cpu_to_elf16(ehdr, 0); + } + else die("Uknown elf class: %x\n", ehdr->ei_class); +} +static void serialize_phdrs(char *buf, struct memelfheader *ehdr, size_t note_size) +{ + int i; + size_t offset, note_offset; + if (ehdr->ei_class == ELFCLASS32) { + Elf32_Phdr *phdr = (Elf32_Phdr *)buf; + note_offset = + sizeof(Elf32_Ehdr) + (sizeof(Elf32_Phdr)*ehdr->e_phnum); + offset = note_offset + note_size; + for(i = 0; i < ehdr->e_phnum; i++) { + struct memelfphdr *hdr = ehdr->e_phdr + i; + phdr[i].p_type = cpu_to_elf32(ehdr, hdr->p_type); + phdr[i].p_offset = cpu_to_elf32(ehdr, offset); + phdr[i].p_vaddr = cpu_to_elf32(ehdr, hdr->p_vaddr); + phdr[i].p_paddr = cpu_to_elf32(ehdr, hdr->p_paddr); + phdr[i].p_filesz = cpu_to_elf32(ehdr, hdr->p_filesz); + phdr[i].p_memsz = cpu_to_elf32(ehdr, hdr->p_memsz); + phdr[i].p_flags = cpu_to_elf32(ehdr, hdr->p_flags); + phdr[i].p_align = cpu_to_elf32(ehdr, 0); + if (phdr[i].p_type == PT_NOTE) { + phdr[i].p_filesz = cpu_to_elf32(ehdr, note_size); + phdr[i].p_memsz = cpu_to_elf32(ehdr, note_size); + phdr[i].p_offset = cpu_to_elf32(ehdr, note_offset); + } else { + offset += hdr->p_filesz; + } + } + } + else if (ehdr->ei_class == ELFCLASS64) { + Elf64_Phdr *phdr = (Elf64_Phdr *)buf; + note_offset = + sizeof(Elf64_Ehdr) + (sizeof(Elf64_Phdr)*ehdr->e_phnum); + offset = note_offset + note_size; + for(i = 0; i < ehdr->e_phnum; i++) { + struct memelfphdr *hdr = ehdr->e_phdr + i; + phdr[i].p_type = cpu_to_elf32(ehdr, hdr->p_type); + phdr[i].p_flags = cpu_to_elf32(ehdr, hdr->p_flags); + phdr[i].p_offset = cpu_to_elf64(ehdr, offset); + phdr[i].p_vaddr = cpu_to_elf64(ehdr, hdr->p_vaddr); + phdr[i].p_paddr = cpu_to_elf64(ehdr, hdr->p_paddr); + phdr[i].p_filesz = cpu_to_elf64(ehdr, hdr->p_filesz); + phdr[i].p_memsz = cpu_to_elf64(ehdr, hdr->p_memsz); + phdr[i].p_align = cpu_to_elf64(ehdr, 0); + if (phdr[i].p_type == PT_NOTE) { + phdr[i].p_filesz = cpu_to_elf64(ehdr, note_size); + phdr[i].p_memsz = cpu_to_elf64(ehdr, note_size); + phdr[i].p_offset = cpu_to_elf64(ehdr, note_offset); + } else { + offset += hdr->p_filesz; + } + } + } + else { + die("Unknwon elf class: %x\n", ehdr->ei_class); + } +} + +static void write_buf(int fd, char *buf, size_t size) +{ + size_t progress = 0; + ssize_t result; + while(progress < size) { + result = write(fd, buf + progress, size - progress); + if (result < 0) { + if ((errno == EAGAIN) || (errno == EINTR)) { + continue; + } + die ("write of %ld bytes failed: %s\n", + size - progress, strerror(errno)); + } + progress += result; + } +} +static void write_elf(struct memelfheader *ehdr, char *output) +{ + size_t ehdr_size; + size_t phdr_size; + size_t note_size; + size_t size; + uint16_t checksum; + size_t bytes; + char *buf; + int result, fd; + int i; + /* Prep for adding the checksum */ + for(i = 0; i < ehdr->e_notenum; i++) { + if ((memcmp(ehdr->e_notes[i].n_name, "ELFBoot", 8) == 0) && + (ehdr->e_notes[i].n_type == EIN_PROGRAM_CHECKSUM)) { + ehdr->e_notes[i].n_desc = &checksum; + ehdr->e_notes[i].n_descsz = 2; + } + } + /* Compute the sizes */ + ehdr_size = 0; + phdr_size = 0; + note_size = 0; + if (ehdr->e_notenum) { + note_size = sizeof_notes(ehdr->e_notes, ehdr->e_notenum); + } + if (ehdr->ei_class == ELFCLASS32) { + ehdr_size = sizeof(Elf32_Ehdr); + phdr_size = sizeof(Elf32_Phdr) * ehdr->e_phnum; + } + else if (ehdr->ei_class == ELFCLASS64) { + ehdr_size = sizeof(Elf64_Ehdr); + phdr_size = sizeof(Elf64_Phdr) * ehdr->e_phnum; + } + else { + die("Unknown elf class: %x\n", ehdr->ei_class); + } + + /* Allocate a buffer to temporarily hold the serialized forms */ + size = ehdr_size + phdr_size + note_size; + buf = xmalloc(size, "Elf Headers"); + memset(buf, 0, size); + serialize_ehdr(buf, ehdr); + serialize_phdrs(buf + ehdr_size, ehdr, note_size); + + /* Compute the checksum... */ + checksum = ipchksum(buf, ehdr_size + phdr_size); + bytes = ehdr_size + phdr_size; + for(i = 0; i < ehdr->e_phnum; i++) { + checksum = add_ipchksums(bytes, checksum, + ipchksum(ehdr->e_phdr[i].p_data, ehdr->e_phdr[i].p_filesz)); + bytes += ehdr->e_phdr[i].p_memsz; + } + + /* Compute the final form of the notes */ + serialize_notes(buf + ehdr_size + phdr_size, ehdr); + + /* Now write the elf image */ + fd = open(output, O_WRONLY | O_CREAT | O_EXCL, S_IRUSR | S_IRGRP | S_IROTH); + if (fd < 0) { + die("Cannot open ``%s'':%s\n", + output, strerror(errno)); + } + write_buf(fd, buf, size); + for(i = 0; i < ehdr->e_phnum; i++) { + write_buf(fd, ehdr->e_phdr[i].p_data, ehdr->e_phdr[i].p_filesz); + } + result = close(fd); + if (result < 0) { + die("Close on %s failed: %s\n", + output, strerror(errno)); + } +} + +static void version(void) +{ + printf("mkelfImage " VERSION " released " RELEASE_DATE "\n"); +} +void usage(void) +{ + int i; + version(); + printf( + "Usage: mkelfImage [OPTION]... <kernel> <elf_kernel>\n" + "Build an ELF bootable kernel image from a normal kernel image\n" + "\n" + " -h, --help Print this help.\n" + " -v, --version Print the version of kexec.\n" + " --kernel=<filename> Set the kernel to <filename>\n" + " --output=<filename> Output to <filename>\n" + " -t, --type=TYPE Specify the new kernel is of <type>.\n" + "\n" + "Supported kernel types: \n" + ); + for(i = 0; i < file_types; i++) { + printf("%s\n", file_type[i].name); + file_type[i].usage(); + } + printf("\n"); +} + +void error(char *fmt, ...) +{ + va_list args; + va_start(args, fmt); + vfprintf(stderr, fmt, args); + va_end(args); + usage(); + exit(1); +} + +int main(int argc, char **argv) +{ + int opt; + int fileind; + char *type, *kernel, *output; + off_t kernel_size; + char *kernel_buf; + int result; + int i; + struct memelfheader hdr; + + static const struct option options[] = { + MKELF_OPTIONS + { 0, 0, 0, 0 }, + }; + static const char short_options[] = MKELF_OPT_STR; + + memset(&hdr, 0, sizeof(hdr)); + kernel = 0; + output = 0; + + /* Get the default type from the program name */ + type = strrchr(argv[0], '/'); + if (!type) type = argv[0]; + if (memcmp(type, "mkelf-", 6) == 0) { + type = type + 6; + } else { + type = 0; + } + opterr = 0; /* Don't complain about unrecognized options here */ + while ((opt = getopt_long(argc, argv, short_options, options, 0)) != -1) { + switch(opt) { + case OPT_HELP: + usage(); + return 0; + case OPT_VERSION: + version(); + return 0; + case OPT_KERNEL: + kernel = optarg; + break; + case OPT_OUTPUT: + output = optarg; + break; + case OPT_TYPE: + type = optarg; + break; + default: + break; + } + } + fileind = optind; + + /* Reset getopt for the next pass */ + opterr = 1; + optind = 1; + + if (argc - fileind > 0) { + kernel = argv[fileind++]; + } + if (argc - fileind > 0) { + output = argv[fileind++]; + } + if (!kernel) { + error("No kernel specified!\n"); + } + if (!output) { + error("No output file specified!\n"); + } + if (argc - fileind > 0) { + error("%d extra options specified!\n", argc - fileind); + } + + /* slurp in the input kernel */ + kernel_buf = slurp_decompress_file(kernel, &kernel_size); + + /* Find/verify the kernel type */ + for(i = 0; i < file_types; i++) { + char *reason; + if (type && (strcmp(type, file_type[i].name) != 0)) { + continue; + } + reason = file_type[i].probe(kernel_buf, kernel_size); + if (reason == 0) { + break; + } + if (type) { + die("Not %s: %s\n", type, reason); + } + } + if (i == file_types) { + die("Can not determine the file type of %s\n", kernel); + } + result = file_type[i].mkelf(argc, argv, &hdr, kernel_buf, kernel_size); + if (result < 0) { + die("Cannot create %s result: %d\n", output, result); + } + /* open the output file */ + write_elf(&hdr, output); + return 0; +} Added: trunk/util/mkelfImage/main/mkelfImage.man =================================================================== --- trunk/util/mkelfImage/main/mkelfImage.man (rev 0) +++ trunk/util/mkelfImage/main/mkelfImage.man 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,166 @@ +.\" Automatically generated by Pod::Man v1.3, Pod::Parser v1.13 +.\" But now manually maintained +.\" +.\" Standard preamble: +.\" ======================================================================== +.de Sh \" Subsection heading +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp \" Vertical space (when we can't use .PP) +.if t .sp .5v +.if n .sp +.. +.de Vb \" Begin verbatim text +.ft CW +.nf +.ne \\$1 +.. +.de Ve \" End verbatim text +.ft R + +.fi +.. +.\" Set up some character translations and predefined strings. \*(-- will +.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left +.\" double quote, and \*(R" will give a right double quote. | will give a +.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used to +.\" do unbreakable dashes and therefore won't be available. \*(C` and \*(C' +.\" expand to `' in nroff, nothing in troff, for use with C<>. +.tr \(*W-|\(bv\*(Tr +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.ie n \{\ +. ds -- \(*W- +. ds PI pi +. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +. ds L" "" +. ds R" "" +. ds C` "" +. ds C' "" +'br\} +.el\{\ +. ds -- \|\(em\| +. ds PI \(*p +. ds L" `` +. ds R" '' +'br\} +.\" +.\" If the F register is turned on, we'll generate index entries on stderr for +.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index +.\" entries marked with X<> in POD. Of course, you'll have to process the +.\" output yourself in some meaningful fashion. +.if \nF \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" +.. +. nr % 0 +. rr F +.\} +.\" +.\" For nroff, turn off justification. Always turn off hyphenation; it makes +.\" way too many mistakes in technical documents. +.hy 0 +.if n .na +.\" +.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). +.\" Fear. Run. Save yourself. No user-serviceable parts. +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds / +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +.\} +.rm #[ #] #H #V #F C +.\" ======================================================================== +.\" +.IX Title "MKELFIMAGE 8" +.TH MKELFIMAGE 8 "RELEASE_DATE" "VERSION" +.UC +.SH "NAME" +mkelfImage \- make an elf network bootable image for linux +.SH "SYNOPSIS" +.IX Header "SYNOPSIS" +\&\fBmkelfImage\fR [\-\-command\-line=\fIcommand line\fR] [\-\-kernel=\fIpath to vmlinux\fR] [\-\-ramdisk=\fIpath to ramdisk\fR] [\-\-output=\fIfile\fR] [\-\-ramdisk\-base=<start addr>] +.SH "DESCRIPTION" +.IX Header "DESCRIPTION" +\&\fBmkelfImage\fR is a program that makes a elf boot image for linux kernel +images. The image should work with any i386 multiboot compliant boot loader, +an \s-1ELF\s0 bootloader that passes no options, a loader compliant with the linuxBIOS +elf booting spec or with the linux kexec kernel patch. A key feature +here is that nothing relies upon \s-1BIOS\s0 calls, but they are made when +necessary. This is useful for systems running linuxbios. +.SH "BUGS" +.IX Header "BUGS" +Not all kernel parameters can be passed with the multiboot image format. +ip configuration is not automatically passed to a node. +The ramdisk base is hard coded to 8MB by default. +This man page need to be updated. +.SH "SEE ALSO" +.IX Header "SEE ALSO" +The kexec kernel patch. +LinuxBIOS. +Etherboot. +The multiboot standard. +.SH "COPYRIGHT" +.IX Header "COPYRIGHT" +mkelfImage is under the \s-1GNU\s0 Public License version 2 +.SH "AUTHOR" +.IX Header "AUTHOR" +Eric Biederman <ebiederman(a)lnxi.com> Added: trunk/util/mkelfImage/mkelfImage.spec.in =================================================================== --- trunk/util/mkelfImage/mkelfImage.spec.in (rev 0) +++ trunk/util/mkelfImage/mkelfImage.spec.in 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,50 @@ +Summary: make an elf network bootable image for linux +Name: mkelfImage +Version: +Release: 0 +Copyright: GPL +Group: Development/Tools +Source0:%{name}-%{version}.tar.gz +Packager: Andrew Ip <aip(a)cwlinux.com> +BuildRoot: %{_tmppath}/%{name} + +%description +mkelfImage is a program that makes a elf boot image for linux kernel images. +The image should work with any i386 multiboot compliant boot loader, an ELF boot +loader that passes no options, a loader compliant with the linuxBIOS elf booting +spec or with the linux kexec kernel patch. A key feature here is that nothing +relies upon BIOS calls, but they are made when necessary. This is useful for +systems running linuxbios. + +%prep +%setup -q -n %{name}-%{version} + +%build +%configure +make + +%install +make install DESTDIR=${RPM_BUILD_ROOT} + +%files +%defattr(-,root,root) +%{_sbindir}/mkelfImage +%doc News +%doc COPYING +%doc AUTHORS +%{_mandir}/man8/mkelfImage.8.gz + +%changelog +* Mon Jan 13 2003 Eric Biederman <ebiederman(a)lnxi.com> +- Move the man page into section 8 as mkelfImage lives in sbin + +* Mon Aug 26 2002 Joshua Aune <luken(a)linuxnetworx.com> 1.15-1 +- New version +- Merge distro and Eric's spec file + +* Fri Aug 23 2002 Eric Biederman <ebiederman(a)lnxi.com> +- Simplified and incorporated into mkelfImage + +* Sat Aug 10 2002 Andrew Ip <aip(a)cwlinux.com> +- Initial release + Added: trunk/util/mkelfImage/util/Makefile =================================================================== --- trunk/util/mkelfImage/util/Makefile (rev 0) +++ trunk/util/mkelfImage/util/Makefile 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,3 @@ +$(OBJDIR)/bin/bin-to-hex: util/bin-to-hex.c + $(MKDIR) -p $(@D) + $(HOST_CC) $(HOST_CFLAGS) $< -o $@ Added: trunk/util/mkelfImage/util/bin-to-hex.c =================================================================== --- trunk/util/mkelfImage/util/bin-to-hex.c (rev 0) +++ trunk/util/mkelfImage/util/bin-to-hex.c 2008-02-15 18:16:06 UTC (rev 3103) @@ -0,0 +1,20 @@ +#include <stdio.h> + +int main(int argc, char **argv) +{ + int c; + int i; + i = 0; + while((c = getchar()) != EOF) { + if ((i % 16) != 0) { + putchar(' '); + } + printf("0x%02x,", c); + i++; + if ((i %16) == 0) { + putchar('\n'); + } + } + putchar('\n'); + return 0; +}

1 0

Re: [coreboot] r593 -
by Peter Stuge 15 Feb '08

15 Feb '08

I have issues with parts of this. On Wed, Feb 13, 2008 at 10:00:21PM +0100, svn(a)coreboot.org wrote: > M include/device/path.h > Add LPC path type, replacing SUPERIO path type, since SUPERIO is > only one type of LPC. Clean up tabbing in parts of the file > (cosmetic). I think this needs more discussion. Are all superios we want to support indeed LPC? Will that stay true? Is the code generic enough to work for any LPC device? (Flash chip, EC, custom hardware?) > +struct lpc_path > +{ > + unsigned iobase; > +}; Sorry, but I think this is bogus. LPC can do IO, memory access, DMA and bus master transfers. iobase seems to be a superio path, not a generic LPC path. > M northbridge/intel/i440bxemulation/dts > Add ID info for the chip. > { > ramsize = "128"; > constructor = "i440bx_constructors"; > + domainid = "0x8086, 0x7190"; > }; Again, does this identify a new domain created by this device, or does it identify this device within the containing domain? Can we escape this ambiguity? > { > ramsize = "128"; > constructor = "i440bx_constructors"; > + domainid = "0x8086, 0x7190"; > }; > struct constructor i440bx_constructors[] = { > {.id = {.type = DEVICE_ID_PCI_DOMAIN, > + .u = {.pci_domain = {.vendor = 0x8086,.device = 0x7190}}}, > + .ops = &i440bxemulation_pcidomainops}, > {.id = {.type = DEVICE_ID_PCI, > .u = {.pci = {.vendor = 0x8086,.device = 0x7190}}}, These ids are repeated four times, that is at least two times too many. Yes, this device id is both a PCI device and a domain, but still. > + domain@0 { I'd kind of like to prepend pci_ here. "pci_domain" > /config/("northbridge/intel/i440bxemulation/dts"); > + bus@0 { And here. "pci_bus" > + pci@0,0 { > + }; > + pci@1,0 { And have these be devices of some sort so that they are not mistaken for a peripheral component _interconnect_. (ie. the bus) > -/* > -#if 0 The cleanup is really great! But please make it a separate patch next time. //Peter

4 15

Re: [coreboot] Run PCI rom before PCI bus scan??
by Corey Osgood 15 Feb '08

15 Feb '08

Another missed cc. On Feb 7, 2008 5:46 PM, Corey Osgood <corey.osgood(a)gmail.com> wrote: > On Feb 7, 2008 5:02 PM, <joe(a)smittys.pointclark.net> wrote: > > > Quoting Marc Karasek <Marc.Karasek(a)Sun.COM>: > > > > > Let me add me two cents.. > > > > > > I have dealt with the Intel MACs in the past so let me dreg up some > > > memorries... > > > > > > From what I recall, you had a serial eeprom on the board that > > > contained the init for the chip. This was the 82545GM. > > > > > > The eeprom image was protected by a CRC and if the CRC failed it would > > > not load the image. > > > > By CRC do you mean checksum? There is a checksum in the eeprom. > > > > > The device would also not be visible on the PCI > > > Bus unless the eeprom was loaded. I have attached the 82545 eeprom > > > spec sheet (freely avail from Intel) maybe this will give you some > > > insight. > > > > > > Intel has a program to read/update the paramters. I never used it, > > > mainly because I was on an embedded system running MIPS-Linux and they > > > would only provide a x86 binary, no src code. It took me a couple of > > > iterations to get the eeprom right. Maybe you can get the utility > > from > > > Intel and dump the eeprom. What I do not understand is why you would > > be > > > having problems with coreboot. the only thing I can guess is the > > > default eeprom is putting the MAC into a state that the BIOS must take > > > it out of (maybe WoL). Did you say you have the spec sheet for the > > > part and it talks about the eeprom? > > > > > Marc I am able to read the eeprom in Linux with ethtool. Wol is > > enabled. This is a 82562ET chipset (same family). Corey, I am pretty > > sure that atmel chip is the eeprom. Again, here is what I think needs > > to be done: > > > > OK, here is what I have picked up reading, reading, and more reading: > > 1. When the system is powered on "At this point, the LAN > > controller is in the D0u state" > > > > 2. The "Platform LAN Connect component" is actually a command script > > (probibly a rom written in assembly) runs and sets up the CSR register > > (I could setup a script in the mainboard directory and run from auto.c). > > > > 3. At this point it goes into a DOa state. > > > > 3. The "Platform LAN Connect component" hands it over to the bios > > (coreboot) to setup "Memory, or I/O Base Registers in the PCI > > Configuration space" > > > > 4. nic is setup and ready to go! > > > > What do you think? > > > > The only thing I am not sure of is how to read/write to the CSR > > register??? > > > > > > Thanks - Joe > > > > > > I apologize if this seems disorganized, I'm trying to work it out: > > 1: set up csr memory/io base in the nic. ami bios uses 0xff7ff000 for mem > base, and 0xdc01 as io base, these values should work to test with. > Datasheet contradicts itself, says bits 3:0 of the mem base registers are > all hardwired to 0, then gives a default value of 0x8. > > 2: write 0x3 to register 0xe (in IO space?) to enable the rom and clock. > if this is io space, the write is just outb(val, (NIC_IO_BASE + reg)). There > are reserved registers, so be sure to do a read-modify-write. > > 3: reset the lan controller? write 1 to bit 3 of 0x1c. Wait 1ms > afterwards. > > Good luck, hope this helps > -Corey >

3 4

ASUS A8N-SLI Deluxe support in coreboot
by Martin 15 Feb '08

15 Feb '08

Hi. I was searching for support for ASUS A8N-SLI Deluxe support in coreboot, and found this page: http://www.coreboot.org/ASUS_A8N-E_Build_Tutorial which mentions that ASUS A8N-SLI Deluxe is out of stock mostly. I own this motherboard, and I wonder if there is anything I can do to help the project out(without causing permanent damage to my board of course :) .) Best regards Martin

1 0

cache as ram
by Mikhail Savchenko 15 Feb '08

15 Feb '08

Are where any methodic to patch this file follow the platform specific?

2 1

porting coreboot
by Mikhail Savchenko 15 Feb '08

15 Feb '08

Hi, I'm porting coreboot to tyan 3992 (HT2000/HT1000) using MSI MS9185 prebuild, if I right understand, all I need to do is edit Config.lb of ms9185 build, with my platform lspci data, or maybe something else?

2 1

ATI chipset based maintboards
by Mikhail Savchenko 15 Feb '08

15 Feb '08

Hi, can you tell me what kind of technology documentations should our company (we are AMD partner) get from AMD/ATI to be able add support of ATI chipsets to coreboot?

5 4

← Newer
1
...
19
20
21
22
23
24
25
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2008