coreboot February 2008

coreboot@coreboot.org

77 participants
422 discussions

broadcom with socketF
by Mikhail Savchenko 15 Feb '08

15 Feb '08

Hi, I'm getting a kind of errors, when I trying to compile refs. Broadcom/blast with socket F cpu support, with the next error log coreboot_ram.o(.text+0x724): In function `model_10xxx_init': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x743): In function `model_10xxx_init': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x75e): In function `model_10xxx_init': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x3bbd): In function `get_apicid_base': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x3c4d): In function `get_apicid_base': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x7b1f): In function `cpu_bus_scan': northbridge.c: undefined reference to `is_cpu_f0_in_bsp' coreboot_ram.o(.text+0x7d39): In function `set_vid': pstate.c: undefined reference to `get_node_pci' coreboot_ram.o(.text+0x7d59):pstate.c: undefined reference to `get_node_pci' coreboot_ram.o(.text+0x81ff): In function `prep_pstates_all': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x820b): In function `prep_pstates_all': : undefined reference to `get_node_pci' coreboot_ram.o(.text+0x8855): In function `init_pstates': : undefined reference to `get_node_pci' collect2: ld returned 1 exit status make[1]: *** [coreboot_ram] Error 1 make[1]: Leaving directory `/root/coreboot-v2/targets/broadcom/blast/blast/normal' make: *** [normal/coreboot.rom] Error 1 any ideas how can I fix this

2 1

r600 - coreboot-v3/southbridge/amd/cs5536
by svn＠coreboot.org 15 Feb '08

15 Feb '08

Author: hailfinger Date: 2008-02-15 14:49:52 +0100 (Fri, 15 Feb 2008) New Revision: 600 Modified: coreboot-v3/southbridge/amd/cs5536/cs5536.c Log: Factor out Geode LX VPCI device disabling into a separate function which consumes one device at a time. This helps avoid array handling in the dts and allows us to use generic disabling infrastructure. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Acked-by: Corey Osgood <corey.osgood(a)gmail.com> Modified: coreboot-v3/southbridge/amd/cs5536/cs5536.c =================================================================== --- coreboot-v3/southbridge/amd/cs5536/cs5536.c 2008-02-14 22:34:40 UTC (rev 599) +++ coreboot-v3/southbridge/amd/cs5536/cs5536.c 2008-02-15 13:49:52 UTC (rev 600) @@ -570,6 +570,15 @@ } +static void hide_vpci(u32 vpci_devid) +{ + /* Hide unwanted virtual PCI device. */ + printk(BIOS_DEBUG, "Hiding VPCI device: 0x%08X\n", + vpci_devid); + outl(vpci_devid + 0x7C, 0xCF8); + outl(0xDEADBEEF, 0xCFC); +} + /** * TODO. * @@ -608,16 +617,6 @@ if (sb->enable_ide) ide_init(dev); -#warning Add back in unwanted VPCI support -#if 0 - /* Disable unwanted virtual PCI devices. */ - for (i = 0; (i < MAX_UNWANTED_VPCI) && (0 != sb->unwanted_vpci[i]); i++) { - printk(BIOS_DEBUG, "Disabling VPCI device: 0x%08X\n", - sb->unwanted_vpci[i]); - outl(sb->unwanted_vpci[i] + 0x7C, 0xCF8); - outl(0xDEADBEEF, 0xCFC); - } -#endif printk(BIOS_SPEW, "cs5536: %s() Exit\n", __FUNCTION__); }

1 0

patch: more path support
by ron minnich 15 Feb '08

15 Feb '08

This patch adds more path support to coreboot and to the dtc. This support in turn reduces annoying warning messages as coreboot comes up. ron

6 34

[openvsa] patch: ensure all data section symbols are linked into vsainit.bin
by Chris Kilgour 15 Feb '08

15 Feb '08

2 2

r6 - trunk/openvsa/sysmgr
by svn＠coreboot.org 15 Feb '08

15 Feb '08

Author: kilgour Date: 2008-02-15 05:44:00 +0100 (Fri, 15 Feb 2008) New Revision: 6 Modified: trunk/openvsa/sysmgr/vsainit.lnk Log: [openvsa] ensure all data section symbols are linked into vsainit.bin Signed-off-by: Chris Kilgour <techie(a)whiterocker.com> Acked-by: Marc Jones <marc.jones(a)amd.com> Modified: trunk/openvsa/sysmgr/vsainit.lnk =================================================================== --- trunk/openvsa/sysmgr/vsainit.lnk 2008-02-13 05:21:25 UTC (rev 5) +++ trunk/openvsa/sysmgr/vsainit.lnk 2008-02-15 04:44:00 UTC (rev 6) @@ -24,7 +24,7 @@ SECTIONS { . = 0; - .blob : { init.o(.text) init.o(.data) *(.text) } + .blob : { init.o(.text) *(.text) *(.data) } . = ALIGN(4); VSA_Image = .; /DISCARD/ : { *(.*) }

1 0

PIRQ changes
by ron minnich 15 Feb '08

15 Feb '08

changes to support PIRQ tables. This now builds,runs, loads FILO, and loads linux. But interrupts are still not set right. That's for tomorrow. ron

2 2

buildrom lzma patch
by Myles Watson 14 Feb '08

14 Feb '08

This patch uses lar to compress a payload, instead of pre-compressing it. Since we are already using lar to add the payload, this simplifies the build process. It also allows us to compress filo, which didn't work with v2. Myles Signed-off-by: Myles Watson <myles(a)pel.cs.byu.edu>

2 2

[PATCH] Move v3 config variables to Kconfig style
by Carl-Daniel Hailfinger 14 Feb '08

14 Feb '08

v3 still has many places where config variables are tested with #if in v2 style. That fails silently in v3. Fix up the most obvious ones. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: LinuxBIOSv3-if0crud-2/include/spinlock.h =================================================================== --- LinuxBIOSv3-if0crud-2/include/spinlock.h (Revision 596) +++ LinuxBIOSv3-if0crud-2/include/spinlock.h (Arbeitskopie) @@ -23,7 +23,7 @@ #ifndef SPINLOCK_H #define SPINLOCK_H -#if defined(CONFIG_SMP) && CONFIG_SMP == 1 +#ifdef CONFIG_SMP #include <arch/spinlock.h> Index: LinuxBIOSv3-if0crud-2/device/device.c =================================================================== --- LinuxBIOSv3-if0crud-2/device/device.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/device/device.c (Arbeitskopie) @@ -534,7 +534,7 @@ base, bridge->size, bridge->align, bridge->gran); } -#if defined(CONFIG_PCI_OPTION_ROM_RUN) && CONFIG_PCI_OPTION_ROM_RUN == 1 +#ifdef CONFIG_PCI_OPTION_ROM_RUN struct device *vga_pri = 0; int vga_inited = 0; static void allocate_vga_resource(void) @@ -580,8 +580,7 @@ if (!vga) { vga = vga_first; } -#if defined(CONFIG_INITIALIZE_ONBOARD_VGA_FIRST) && \ - CONFIG_INITIALIZE_ONBOARD_VGA_FIRST == 1 +#ifdef CONFIG_INITIALIZE_ONBOARD_VGA_FIRST if (vga_onboard) // Will use on board VGA as pri. #else if (!vga) // Will use last add on adapter as pri. @@ -919,7 +918,7 @@ mem->flags |= IORESOURCE_ASSIGNED; mem->flags &= ~IORESOURCE_STORED; -#if defined(CONFIG_PCI_OPTION_ROM_RUN) && CONFIG_PCI_OPTION_ROM_RUN == 1 +#ifdef CONFIG_PCI_OPTION_ROM_RUN /* Allocate the VGA I/O resource. */ allocate_vga_resource(); #endif Index: LinuxBIOSv3-if0crud-2/device/pci_rom.c =================================================================== --- LinuxBIOSv3-if0crud-2/device/pci_rom.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/device/pci_rom.c (Arbeitskopie) @@ -105,7 +105,7 @@ static void *pci_ram_image_start = (void *)PCI_RAM_IMAGE_START; -#if defined(CONFIG_PCI_OPTION_ROM_RUN) && CONFIG_PCI_OPTION_ROM_RUN == 1 +#ifdef CONFIG_PCI_OPTION_ROM_RUN extern int vga_inited; // Defined in vga_console.c. #ifndef CONFIG_MULTIPLE_VGA_INIT extern struct device *vga_pri; // The primary VGA device, defined in device.c. @@ -135,7 +135,7 @@ rom_size = rom_header->size * 512; if (PCI_CLASS_DISPLAY_VGA == rom_data->class_hi) { -#if defined(CONFIG_PCI_OPTION_ROM_RUN) && CONFIG_PCI_OPTION_ROM_RUN == 1 +#ifdef CONFIG_PCI_OPTION_ROM_RUN #ifndef CONFIG_MULTIPLE_VGA_INIT if (dev != vga_pri) return NULL; // Only one VGA supported. Index: LinuxBIOSv3-if0crud-2/device/pci_device.c =================================================================== --- LinuxBIOSv3-if0crud-2/device/pci_device.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/device/pci_device.c (Arbeitskopie) @@ -702,7 +702,7 @@ void pci_dev_init(struct device *dev) { printk(BIOS_SPEW, "PCI: pci_dev_init\n"); -#if defined(CONFIG_PCI_OPTION_ROM_RUN) && CONFIG_PCI_OPTION_ROM_RUN == 1 +#ifdef CONFIG_PCI_OPTION_ROM_RUN void run_bios(struct device *dev, unsigned long addr); struct rom_header *rom, *ram; Index: LinuxBIOSv3-if0crud-2/lib/console.c =================================================================== --- LinuxBIOSv3-if0crud-2/lib/console.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/lib/console.c (Arbeitskopie) @@ -89,7 +89,7 @@ #ifdef CONFIG_CONSOLE_SERIAL if (byte == '\n') { uart8250_tx_byte(TTYSx_BASE, '\r'); -#if defined(CONFIG_CONSOLE_PREFIX) && (CONFIG_CONSOLE_PREFIX == 1) +#ifdef CONFIG_CONSOLE_PREFIX uart8250_tx_byte(TTYSx_BASE, '\n'); uart8250_tx_byte(TTYSx_BASE, '('); uart8250_tx_byte(TTYSx_BASE, 'L'); Index: LinuxBIOSv3-if0crud-2/arch/x86/mc146818rtc.c =================================================================== --- LinuxBIOSv3-if0crud-2/arch/x86/mc146818rtc.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/arch/x86/mc146818rtc.c (Arbeitskopie) @@ -43,7 +43,7 @@ outb((val),RTC_PORT(1)); \ }) -#if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1) +#ifdef CONFIG_OPTION_TABLE static int rtc_checksum_valid(int range_start, int range_end, int cks_loc) { @@ -78,14 +78,14 @@ void rtc_init(int invalid) { -#if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1) +#ifdef CONFIG_OPTION_TABLE unsigned char x; int cmos_invalid, checksum_invalid; #endif printk(BIOS_DEBUG, "Initializing realtime clock.\n"); -#if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1) +#ifdef CONFIG_OPTION_TABLE /* See if there has been a CMOS power problem. */ x = CMOS_READ(RTC_VALID); @@ -127,7 +127,7 @@ /* Setup the frequency it operates at */ CMOS_WRITE(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT); -#if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1) +#ifdef CONFIG_OPTION_TABLE /* See if there is a coreboot CMOS checksum error */ checksum_invalid = !rtc_checksum_valid(CB_CKS_RANGE_START, CB_CKS_RANGE_END,CB_CKS_LOC); @@ -224,7 +224,7 @@ if(!rtc_checksum_valid(CB_CKS_RANGE_START, CB_CKS_RANGE_END,CB_CKS_LOC)) return(-4); -#if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1) +#ifdef CONFIG_OPTION_TABLE return(0); #else return -2; Index: LinuxBIOSv3-if0crud-2/arch/x86/speaker.c =================================================================== --- LinuxBIOSv3-if0crud-2/arch/x86/speaker.c (Revision 596) +++ LinuxBIOSv3-if0crud-2/arch/x86/speaker.c (Arbeitskopie) @@ -93,7 +93,7 @@ */ void beep_short(void) { -#if defined(CONFIG_BEEPS) && (CONFIG_BEEPS == 1) +#ifdef CONFIG_BEEPS speaker_tone(1760, 500); /* 1760 == note A6. */ #endif } @@ -103,7 +103,7 @@ */ void beep_long(void) { -#if defined(CONFIG_BEEPS) && (CONFIG_BEEPS == 1) +#ifdef CONFIG_BEEPS speaker_tone(1760, 2000); /* 1760 == note A6. */ #endif } -- http://www.hailfinger.org/

4 9

Re: [coreboot] r3102 - trunk/util/flashrom
by Peter Stuge 14 Feb '08

14 Feb '08

On Fri, Feb 15, 2008 at 12:22:21AM +0100, svn(a)coreboot.org wrote: > Modified: > trunk/util/flashrom/Makefile > Log: > With this small change it is possible to build flashrom again when > specifying custom CFLAGS/LDFLAGS from the make command line like: > > make CFLAGS="..." LDFLAGS="..." I would really like to be able to do this for all utils. (lar, superiotool, dtc, nvramtool, ..) I don't appreciate the v3 build stuff I'm afraid. :\ (Maybe it's just lar which is hooked in so far?) //Peter

1 0

r3102 build service
by coreboot information 14 Feb '08

14 Feb '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "uwe" checked in revision 3102 to the coreboot source repository and caused the following changes: Change Log: With this small change it is possible to build flashrom again when specifying custom CFLAGS/LDFLAGS from the make command line like: make CFLAGS="..." LDFLAGS="..." I need to do this when building flashrom in a cross compiler environment like buildroot for a foreign target. Signed-off-by: Clark Rawlins <clark(a)bit63.org> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of a-trend:atc-6220 has been fixed Compilation of abit:be6-ii_v2_0 has been fixed Compilation of advantech:pcm-5820 has been fixed Compilation of agami:aruma has been fixed Compilation of amd:db800 has been fixed Compilation of amd:norwich has been fixed Compilation of amd:rumba has been fixed Compilation of amd:serengeti_cheetah has been fixed Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=3102&device=serengeti_chee… Compilation of arima:hdama has been fixed Compilation of artecgroup:dbe61 has been fixed Compilation of asi:mb_5blmp has been fixed Compilation of asus:a8n_e has been fixed Compilation of asus:a8v-e_se has been fixed Compilation of asus:mew-am has been fixed Compilation of asus:mew-vm has been fixed Compilation of asus:p2b has been fixed Compilation of asus:p2b-f has been fixed Compilation of asus:p3b-f has been fixed Compilation of axus:tc320 has been fixed Compilation of azza:pt-6ibd has been fixed Compilation of bcom:winnet100 has been fixed Compilation of biostar:m6tba has been fixed Compilation of broadcom:blast has been fixed Compilation of compaq:deskpro_en_sff_p600 has been fixed Compilation of dell:s1850 has been fixed Compilation of digitallogic:adl855pc has been fixed Compilation of digitallogic:msm586seg has been fixed Compilation of digitallogic:msm800sev has been fixed Compilation of eaglelion:5bcm has been fixed Compilation of emulation:qemu-x86 has been fixed Compilation of gigabyte:ga-6bxc has been fixed Compilation of gigabyte:ga_2761gxdk has been fixed Compilation of gigabyte:m57sli has been fixed Compilation of ibm:e325 has been fixed Compilation of ibm:e326 has been fixed Compilation of iei:juki-511p has been fixed Compilation of iei:nova4899r has been fixed Compilation of intel:jarrell has been fixed Compilation of intel:xe7501devkit has been fixed Compilation of iwill:dk8_htx has been fixed Compilation of iwill:dk8s2 has been fixed Compilation of iwill:dk8x has been fixed Compilation of lippert:frontrunner has been fixed Compilation of msi:ms6178 has been fixed Compilation of msi:ms7260 has been fixed Compilation of msi:ms9185 has been fixed Compilation of msi:ms9282 has been fixed Compilation of newisys:khepri has been fixed Compilation of nvidia:l1_2pvv has been fixed Compilation of olpc:btest has been fixed Compilation of olpc:rev_a has been fixed Compilation of pcengines:alix1c has been fixed Compilation of sunw:ultra40 has been fixed Compilation of supermicro:h8dmr has been fixed Compilation of supermicro:x6dai_g has been fixed Compilation of supermicro:x6dhe_g has been fixed Compilation of supermicro:x6dhe_g2 has been fixed Compilation of supermicro:x6dhr_ig has been fixed Compilation of supermicro:x6dhr_ig2 has been fixed Compilation of technologic:ts5300 has been fixed Compilation of tyan:s1846 has been fixed Compilation of tyan:s2735 has been fixed Compilation of tyan:s2850 has been fixed Compilation of tyan:s2875 has been fixed Compilation of tyan:s2880 has been fixed Compilation of tyan:s2881 has been fixed Compilation of tyan:s2882 has been fixed Compilation of tyan:s2885 has been fixed Compilation of tyan:s2891 has been fixed Compilation of tyan:s2892 has been fixed Compilation of tyan:s2895 has been fixed Compilation of tyan:s2912 has been fixed Compilation of tyan:s4880 has been fixed Compilation of tyan:s4882 has been fixed Compilation of via:epia has been fixed Compilation of via:epia-m has been fixed If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

← Newer
1
...
20
21
22
23
24
25
26
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot February 2008