coreboot January 2008

coreboot@coreboot.org

79 participants
347 discussions

r3059 - trunk/util/flashrom
by svn＠coreboot.org 18 Jan '08

18 Jan '08

Author: uwe Date: 2008-01-18 18:48:51 +0100 (Fri, 18 Jan 2008) New Revision: 3059 Modified: trunk/util/flashrom/README trunk/util/flashrom/flashrom.8 Log: Minor documentation improvements/fixes in the README and manpage (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/flashrom/README =================================================================== --- trunk/util/flashrom/README 2008-01-18 16:17:44 UTC (rev 3058) +++ trunk/util/flashrom/README 2008-01-18 17:48:51 UTC (rev 3059) @@ -2,8 +2,12 @@ Flashrom README ------------------------------------------------------------------------------- -This is the universal (coreboot) flash utility. +Flashrom is a universal flash programming utility for DIP, PLCC, or SPI +flash ROM chips. It can be used to flash BIOS/coreboot/firmware images. +(see http://coreboot.org for details on coreboot) + + Build Requirements ------------------ @@ -64,7 +68,7 @@ ROM Layout Support ------------------ -Flashrom supports ROM layouts. This allows to flash certain parts of +Flashrom supports ROM layouts. This allows you to flash certain parts of the flash chip only. A ROM layout file looks like follows: 00000000:00008fff gfxrom @@ -94,7 +98,7 @@ Disk on Chip support -------------------- -Disk on Chip support is currently disabled since it is considered unstable. +Disk on Chip support is currently disabled since it is considered unstable. Change CFLAGS in the Makefile to enable it: Remove -DDISABLE_DOC from CFLAGS. Modified: trunk/util/flashrom/flashrom.8 =================================================================== --- trunk/util/flashrom/flashrom.8 2008-01-18 16:17:44 UTC (rev 3058) +++ trunk/util/flashrom/flashrom.8 2008-01-18 17:48:51 UTC (rev 3059) @@ -1,6 +1,6 @@ -.TH FLASHROM 8 "October 18, 2007" +.TH FLASHROM 8 "January 18, 2008" .SH NAME -flashrom \- a universal flash programming utility +flashrom \- a universal BIOS/ROM/flash programming utility .SH SYNOPSIS .B flashrom \fR[\fB\-rwvEVfh\fR] [\fB\-c\fR chipname] [\fB\-s\fR exclude_start] [\fB\-e\fR exclude_end] [\fB-m\fR vendor:part] [\fB-l\fR file.layout] [\fB-i\fR image_name] [file] @@ -8,33 +8,37 @@ .B flashrom is a universal flash programming utility for DIP, PLCC, or SPI flash ROM chips. It can be used to flash BIOS/coreboot/firmware images, for example. + +(see +.B http://coreboot.org +for details on coreboot) .SH OPTIONS If no file is specified, then all that happens is that flash info is dumped and the flash chip is set to writable. .TP .B "\-r, \-\-read" -Read flash ROM contents an save them into the given file. +Read flash ROM contents and save them into the given file. .TP .B "\-w, \-\-write" -Write file into flash (default when file is specified). +Write file into flash ROM (default when file is specified). .TP .B "\-v, \-\-verify" Verify the flash ROM contents against the given file. .TP .B "\-E, \-\-erase" -Erase the flash device. +Erase the flash ROM device. .TP .B "\-V, \-\-verbose" More verbose output. .TP .B "\-c, \-\-chip" <chipname> -Probe only for specified flash chip. +Probe only for specified flash ROM chip. .TP .B "\-s, \-\-estart" <addr> -Exclude start position. (obsolete) +Exclude start position (obsolete). .TP .B "\-e, \-\-eend" <addr> -Exclude end postion. (obsolete) +Exclude end postion (obsolete). .TP .B "\-m, \-\-mainboard" <vendor:part> Override mainboard settings. This option is needed for some mainboards, @@ -63,12 +67,13 @@ .\".B "\-\-version" .\"Show version information and exit. .SH BUGS -Please report any bugs at http://tracker.coreboot.org/trac/coreboot/, -or on the coreboot mailing list (http://www.coreboot.org/Mailinglist). +Please report any bugs at +.BR http://tracker.coreboot.org/trac/coreboot/newticket "," +or on the coreboot mailing list +.RB "(" http://coreboot.org/Mailinglist ")." .SH LICENCE .B flashrom is covered by the GNU General Public License (GPL), version 2 or later. -.\" .SH SEE ALSO .SH COPYRIGHT 2000 Silicon Integrated System Corporation .br @@ -87,4 +92,4 @@ some others .PP This manual page was written by Uwe Hermann <uwe(a)hermann-uwe.de>. -It is licensed under the terms of the GNU GPL (v2 or later). +It is licensed under the terms of the GNU GPL (version 2 or later).

1 0

r3055 build service
by coreboot information 18 Jan '08

18 Jan '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "stepan" checked in revision 3055 to the coreboot source repository and caused the following changes: Change Log: rename linuxbios -> coreboot Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3055&device=serengeti_che… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Re: [coreboot] r3054 - trunk/util/flashrom
by Uwe Hermann 18 Jan '08

18 Jan '08

On Fri, Jan 18, 2008 at 04:33:11PM +0100, svn(a)coreboot.org wrote: > for some reasons the externals did not get committed. Not an ideal commit message, "Rename lb -> cb" or so would have been better. Anyway, the behaviour is ok and intentional. svn ci (or diff, or other operations) don't extend to svn:externals. Nothing to worry about. > - printf_debug("LinuxBIOS table found at %p.\n", lb_table); > + printf_debug("Coreboot table found at %p.\n", lb_table); Capitalized now? You did some renames where it was not capitalized at the beginning of a sentence. We should standardize on one of them. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

1 0

r98 - in buildrom-devel/packages: coreboot-v2 coreboot-v3
by svn＠openbios.org 18 Jan '08

18 Jan '08

Author: jcrouse Date: 2008-01-18 18:06:48 +0100 (Fri, 18 Jan 2008) New Revision: 98 Added: buildrom-devel/packages/coreboot-v2/alix1c.mk buildrom-devel/packages/coreboot-v2/coreboot.inc buildrom-devel/packages/coreboot-v2/ga-2761gxdk.mk buildrom-devel/packages/coreboot-v2/generic.mk buildrom-devel/packages/coreboot-v2/m57sli.mk buildrom-devel/packages/coreboot-v2/msm800sev.mk buildrom-devel/packages/coreboot-v2/norwich.mk buildrom-devel/packages/coreboot-v2/supermicro-h8dmr.mk buildrom-devel/packages/coreboot-v2/tyan-s2882.mk buildrom-devel/packages/coreboot-v2/tyan-s2891.mk buildrom-devel/packages/coreboot-v3/coreboot-v3.mk Removed: buildrom-devel/packages/coreboot-v2/alix1c-linuxbios.mk buildrom-devel/packages/coreboot-v2/ga-2761gxdk-linuxbios.mk buildrom-devel/packages/coreboot-v2/generic-linuxbios.mk buildrom-devel/packages/coreboot-v2/linuxbios.inc buildrom-devel/packages/coreboot-v2/m57sli-linuxbios.mk buildrom-devel/packages/coreboot-v2/msm800sev-linuxbios.mk buildrom-devel/packages/coreboot-v2/norwich-linuxbios.mk buildrom-devel/packages/coreboot-v2/supermicro-h8dmr-linuxbios.mk buildrom-devel/packages/coreboot-v2/tyan-s2882-linuxbios.mk buildrom-devel/packages/coreboot-v2/tyan-s2891-linuxbios.mk buildrom-devel/packages/coreboot-v3/linuxbiosv3.mk Log: Hopefully, this is the last rename - testing will ensue Deleted: buildrom-devel/packages/coreboot-v2/alix1c-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/alix1c-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/alix1c-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/alix1c.mk (from rev 97, buildrom-devel/packages/coreboot-v2/alix1c-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/alix1c.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/alix1c.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,38 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_VSA): + @ echo "Fetching the VSA code..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/coreboot.inc (from rev 97, buildrom-devel/packages/coreboot-v2/linuxbios.inc) =================================================================== --- buildrom-devel/packages/coreboot-v2/coreboot.inc (rev 0) +++ buildrom-devel/packages/coreboot-v2/coreboot.inc 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,100 @@ +# This is the common code included by all the targets + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(COREBOOT_VENDOR),) +$(error No coreboot vendor specified) +endif +ifeq ($(COREBOOT_BOARD),) +$(error No coreboot board specified) +endif +ifeq ($(CBV2_CONFIG),) +$(error No coreboot config specified) +endif +ifeq ($(CBV2_TDIR),) +$(error No coreboot TDIR specified) +endif +endif + +CBV2_OUTPUT=$(CBV2_BUILD_DIR)/$(COREBOOT_ROM_NAME) +CBV2_DIR=$(BUILD_DIR)/coreboot + +# If the user wanted to override the build directory - obey that now + +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_SRC_DIR=$(subst ",,$(CONFIG_CB_BUILDDIR)) +else +CBV2_SRC_DIR=$(CBV2_DIR)/$(CBV2_BASE_DIR) +endif + +CBV2_TARGET_DIR=$(CBV2_SRC_DIR)/targets/ +CBV2_TARGET_NAME=$(COREBOOT_VENDOR)/$(COREBOOT_BOARD) +CBV2_CONFIG_NAME=$(CBV2_TARGET_NAME)/$(CBV2_CONFIG) + +CBV2_BUILD_DIR=$(CBV2_TARGET_DIR)/$(CBV2_TARGET_NAME)/$(CBV2_TDIR) + +CBV2_STAMP_DIR=$(CBV2_DIR)/stamps +CBV2_LOG_DIR=$(CBV2_DIR)/logs + +ifeq ($(CONFIG_VERBOSE),y) +CBV2_FETCH_LOG=/dev/stdout +CBV2_CONFIG_LOG=/dev/stdout +CBV2_BUILD_LOG=/dev/stdout +CBV2_INSTALL_LOG=/dev/stdout +else +CBV2_FETCH_LOG=$(CBV2_LOG_DIR)/fetch.log +CBV2_BUILD_LOG=$(CBV2_LOG_DIR)/build.log +CBV2_CONFIG_LOG=$(CBV2_LOG_DIR)/config.log +CBV2_INSTALL_LOG=$(CBV2_LOG_DIR)/install.log +endif + +# This allows us to skip the unpack/patch/configure stage + +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_DIR_TARGET= +else +CBV2_DIR_TARGET=$(CBV2_STAMP_DIR)/.configured +endif + +$(CBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) + @ cp $< $@ + +$(CBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV2_TARBALL) + @ echo "Unpacking coreboot..." + @ tar -C $(CBV2_DIR) -zxf $(SOURCE_DIR)/$(CBV2_TARBALL) + @ touch $@ + +$(CBV2_STAMP_DIR)/.patched: $(CBV2_STAMP_DIR)/.unpacked + @ echo "Patching coreboot..." + @ $(BIN_DIR)/doquilt.sh $(CBV2_SRC_DIR) $(CBV2_PATCHES) + @ touch $@ + +$(CBV2_STAMP_DIR)/.configured: $(CBV2_STAMP_DIR)/.patched + @ echo "Building target..." + @( cd $(CBV2_TARGET_DIR); \ + ./buildtarget $(CBV2_CONFIG_NAME) > $(CBV2_CONFIG_LOG) 2>&1) + @ touch $@ + +$(CBV2_STAMP_DIR) $(CBV2_LOG_DIR): + @ mkdir -p $@ + +$(CBV2_OUTPUT): $(CBV2_STAMP_DIR) $(CBV2_LOG_DIR) $(CBV2_DIR_TARGET) $(CBV2_PAYLOAD_TARGET) + @ echo "Building coreboot..." + @ (export CPU_OPT="$(STACKPROTECT)"; \ + make -C $(CBV2_BUILD_DIR) > $(CBV2_BUILD_LOG) 2>&1) + +generic-coreboot-clean: + @ echo "Cleaning coreboot..." + @ rm -f $(CBV2_PAYLOAD_TARGET) + @ if [ -d $(CBV2_BUILD_DIR) ];then \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ + fi + @ rm -f $(CBV2_OUTPUT) + +generic-coreboot-distclean: + @ if [ "$(CONFIG_CB_USE_BUILD)" = "y" ]; then \ + echo "Cleaning coreboot build..."; \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ + rm -f $(CBV2_OUTPUT); \ + fi + + @ rm -rf $(CBV2_DIR)/* Deleted: buildrom-devel/packages/coreboot-v2/ga-2761gxdk-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/ga-2761gxdk-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/ga-2761gxdk-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_PATCHES=$(PACKAGE_DIR)/coreboot-v2/patches/2761gxdk-fix-target.patch - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -# This matches the base name of the ROM on -# http://www.coreboot.org/data/optionroms/ - -OPTIONROM_ID = pci1039,6330 -include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/ga-2761gxdk.mk (from rev 97, buildrom-devel/packages/coreboot-v2/ga-2761gxdk-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/ga-2761gxdk.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/ga-2761gxdk.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,38 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_PATCHES=$(PACKAGE_DIR)/coreboot-v2/patches/2761gxdk-fix-target.patch + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +# This matches the base name of the ROM on +# http://www.coreboot.org/data/optionroms/ + +OPTIONROM_ID = pci1039,6330 +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/generic-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/generic-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/generic-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,42 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -# This is the list of components that comprise the ROM (excluding the payload) -CBV2_COMPONENTS = $(CBV2_OUTPUT) - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -# If an optionrom was specified in the configuration, then use it - -ifneq ($(OPTIONROM_ID),) -include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc - -# Add it to the front of the list so it is prepended to the coreboot output -CBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_COMPONENTS) -endif - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_COMPONENTS) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(CBV2_COMPONENTS) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/generic.mk (from rev 97, buildrom-devel/packages/coreboot-v2/generic-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/generic.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/generic.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,42 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +# This is the list of components that comprise the ROM (excluding the payload) +CBV2_COMPONENTS = $(CBV2_OUTPUT) + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +# If an optionrom was specified in the configuration, then use it + +ifneq ($(OPTIONROM_ID),) +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc + +# Add it to the front of the list so it is prepended to the coreboot output +CBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_COMPONENTS) +endif + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_COMPONENTS) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(CBV2_COMPONENTS) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/linuxbios.inc =================================================================== --- buildrom-devel/packages/coreboot-v2/linuxbios.inc 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/linuxbios.inc 2008-01-18 17:06:48 UTC (rev 98) @@ -1,100 +0,0 @@ -# This is the common code included by all the targets - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(COREBOOT_VENDOR),) -$(error No coreboot vendor specified) -endif -ifeq ($(COREBOOT_BOARD),) -$(error No coreboot board specified) -endif -ifeq ($(CBV2_CONFIG),) -$(error No coreboot config specified) -endif -ifeq ($(CBV2_TDIR),) -$(error No coreboot TDIR specified) -endif -endif - -CBV2_OUTPUT=$(CBV2_BUILD_DIR)/$(COREBOOT_ROM_NAME) -CBV2_DIR=$(BUILD_DIR)/coreboot - -# If the user wanted to override the build directory - obey that now - -ifeq ($(CONFIG_CB_USE_BUILD),y) -CBV2_SRC_DIR=$(subst ",,$(CONFIG_CB_BUILDDIR)) -else -CBV2_SRC_DIR=$(CBV2_DIR)/$(CBV2_BASE_DIR) -endif - -CBV2_TARGET_DIR=$(CBV2_SRC_DIR)/targets/ -CBV2_TARGET_NAME=$(COREBOOT_VENDOR)/$(COREBOOT_BOARD) -CBV2_CONFIG_NAME=$(CBV2_TARGET_NAME)/$(CBV2_CONFIG) - -CBV2_BUILD_DIR=$(CBV2_TARGET_DIR)/$(CBV2_TARGET_NAME)/$(CBV2_TDIR) - -CBV2_STAMP_DIR=$(CBV2_DIR)/stamps -CBV2_LOG_DIR=$(CBV2_DIR)/logs - -ifeq ($(CONFIG_VERBOSE),y) -CBV2_FETCH_LOG=/dev/stdout -CBV2_CONFIG_LOG=/dev/stdout -CBV2_BUILD_LOG=/dev/stdout -CBV2_INSTALL_LOG=/dev/stdout -else -CBV2_FETCH_LOG=$(CBV2_LOG_DIR)/fetch.log -CBV2_BUILD_LOG=$(CBV2_LOG_DIR)/build.log -CBV2_CONFIG_LOG=$(CBV2_LOG_DIR)/config.log -CBV2_INSTALL_LOG=$(CBV2_LOG_DIR)/install.log -endif - -# This allows us to skip the unpack/patch/configure stage - -ifeq ($(CONFIG_CB_USE_BUILD),y) -CBV2_DIR_TARGET= -else -CBV2_DIR_TARGET=$(CBV2_STAMP_DIR)/.configured -endif - -$(CBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) - @ cp $< $@ - -$(CBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV2_TARBALL) - @ echo "Unpacking coreboot..." - @ tar -C $(CBV2_DIR) -zxf $(SOURCE_DIR)/$(CBV2_TARBALL) - @ touch $@ - -$(CBV2_STAMP_DIR)/.patched: $(CBV2_STAMP_DIR)/.unpacked - @ echo "Patching coreboot..." - @ $(BIN_DIR)/doquilt.sh $(CBV2_SRC_DIR) $(CBV2_PATCHES) - @ touch $@ - -$(CBV2_STAMP_DIR)/.configured: $(CBV2_STAMP_DIR)/.patched - @ echo "Building target..." - @( cd $(CBV2_TARGET_DIR); \ - ./buildtarget $(CBV2_CONFIG_NAME) > $(CBV2_CONFIG_LOG) 2>&1) - @ touch $@ - -$(CBV2_STAMP_DIR) $(CBV2_LOG_DIR): - @ mkdir -p $@ - -$(CBV2_OUTPUT): $(CBV2_STAMP_DIR) $(CBV2_LOG_DIR) $(CBV2_DIR_TARGET) $(CBV2_PAYLOAD_TARGET) - @ echo "Building coreboot..." - @ (export CPU_OPT="$(STACKPROTECT)"; \ - make -C $(CBV2_BUILD_DIR) > $(CBV2_BUILD_LOG) 2>&1) - -generic-coreboot-clean: - @ echo "Cleaning coreboot..." - @ rm -f $(CBV2_PAYLOAD_TARGET) - @ if [ -d $(CBV2_BUILD_DIR) ];then \ - $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ - fi - @ rm -f $(CBV2_OUTPUT) - -generic-coreboot-distclean: - @ if [ "$(CONFIG_CB_USE_BUILD)" = "y" ]; then \ - echo "Cleaning coreboot build..."; \ - $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ - rm -f $(CBV2_OUTPUT); \ - fi - - @ rm -rf $(CBV2_DIR)/* Deleted: buildrom-devel/packages/coreboot-v2/m57sli-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/m57sli-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/m57sli-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,49 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_PATCHES= - -ifeq ($(CONFIG_PAYLOAD_FILO),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_LAB),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch -endif - - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/m57sli.mk (from rev 97, buildrom-devel/packages/coreboot-v2/m57sli-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/m57sli.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/m57sli.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,49 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_PATCHES= + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch +endif + + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/msm800sev-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/msm800sev-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/msm800sev-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,38 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/msm800sev.mk (from rev 97, buildrom-devel/packages/coreboot-v2/msm800sev-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/msm800sev.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/msm800sev.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,38 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_VSA): + @ echo "Fetching the VSA code..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/norwich-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/norwich-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/norwich-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,40 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -else -$(warning You specified $(CBV2_TAG) a version to pull in your platform config) -endif -endif - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -CBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_VSA): - @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -# Special rule - append the VSA - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/norwich.mk (from rev 97, buildrom-devel/packages/coreboot-v2/norwich-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/norwich.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/norwich.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,40 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +else +$(warning You specified $(CBV2_TAG) a version to pull in your platform config) +endif +endif + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_VSA): + @ echo "Fetching the VSA code..." + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +# Special rule - append the VSA + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/supermicro-h8dmr-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/supermicro-h8dmr-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/supermicro-h8dmr-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,49 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_PATCHES = - -ifeq ($(CONFIG_PAYLOAD_FILO),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_LAB),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch -endif - - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/supermicro-h8dmr.mk (from rev 97, buildrom-devel/packages/coreboot-v2/supermicro-h8dmr-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/supermicro-h8dmr.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/supermicro-h8dmr.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,49 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_PATCHES = + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch +endif + + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/tyan-s2882-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/tyan-s2882-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/tyan-s2882-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,45 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_PATCHES = - -ifeq ($(CONFIG_PAYLOAD_FILO),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-filo-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_LAB),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch -endif - - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/tyan-s2882.mk (from rev 97, buildrom-devel/packages/coreboot-v2/tyan-s2882-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/tyan-s2882.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/tyan-s2882.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,45 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_PATCHES = + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-filo-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch +endif + + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Deleted: buildrom-devel/packages/coreboot-v2/tyan-s2891-linuxbios.mk =================================================================== --- buildrom-devel/packages/coreboot-v2/tyan-s2891-linuxbios.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v2/tyan-s2891-linuxbios.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,45 +0,0 @@ -# This is the Generic coreboot target - -ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(CBV2_TAG),) -$(error You need to specify a version to pull in your platform config) -endif -endif - -CBV2_PATCHES = - -ifeq ($(CONFIG_PAYLOAD_FILO),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-filo-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch -endif - -ifeq ($(CONFIG_PAYLOAD_LAB),y) - CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch -endif - - -CBV2_BASE_DIR=svn -CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 -CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz -CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc - -$(SOURCE_DIR)/$(CBV2_TARBALL): - @ echo "Fetching the coreboot code..." - @ mkdir -p $(SOURCE_DIR)/coreboot - @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ - $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ - > $(CBV2_FETCH_LOG) 2>&1 - -$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) - @ mkdir -p $(OUTPUT_DIR) - @ cat $(CBV2_OUTPUT) > $@ - -coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) -coreboot-clean: generic-coreboot-clean -coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v2/tyan-s2891.mk (from rev 97, buildrom-devel/packages/coreboot-v2/tyan-s2891-linuxbios.mk) =================================================================== --- buildrom-devel/packages/coreboot-v2/tyan-s2891.mk (rev 0) +++ buildrom-devel/packages/coreboot-v2/tyan-s2891.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,45 @@ +# This is the Generic coreboot target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(CBV2_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +CBV2_PATCHES = + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-filo-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch +endif + + +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) + @ mkdir -p $(OUTPUT_DIR) + @ cat $(CBV2_OUTPUT) > $@ + +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Copied: buildrom-devel/packages/coreboot-v3/coreboot-v3.mk (from rev 97, buildrom-devel/packages/coreboot-v3/linuxbiosv3.mk) =================================================================== --- buildrom-devel/packages/coreboot-v3/coreboot-v3.mk (rev 0) +++ buildrom-devel/packages/coreboot-v3/coreboot-v3.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -0,0 +1,76 @@ +ifeq ($(CBV3_TAG),) +$(error You need to specify a version to pull in your platform config) +endif + +CBV3_URL=svn://coreboot.org/repository/coreboot-v3 +CBV3_TARBALL=coreboot-svn-$(CBV3_TAG).tar.gz +CBV3_DIR=$(BUILD_DIR)/coreboot-v3 +CBV3_SRC_DIR=$(CBV3_DIR)/svn + +CBV3_STAMP_DIR=$(CBV3_DIR)/stamps +CBV3_LOG_DIR=$(CBV3_DIR)/logs + +ifeq ($(CONFIG_VERBOSE),y) +CBV3_FETCH_LOG=/dev/stdout +CBV3_CONFIG_LOG=/dev/stdout +CBV3_BUILD_LOG=/dev/stdout +else +CBV3_FETCH_LOG=$(CBV3_LOG_DIR)/fetch.log +CBV3_CONFIG_LOG=$(CBV3_LOG_DIR)/config.log +CBV3_BUILD_LOG=$(CBV3_LOG_DIR)/build.log +endif + +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +CBV3_OUTPUT=$(CBV3_SRC_DIR)/build/coreboot.rom + +CBV3_PATCHES ?= + +$(SOURCE_DIR)/$(CBV3_TARBALL): + @ mkdir -p $(SOURCE_DIR)/coreboot-v3 + @ $(BIN_DIR)/fetchsvn.sh $(CBV3_URL) \ + $(SOURCE_DIR)/coreboot-v3 $(CBV3_TAG) \ + $@ > $(CBV3_FETCH_LOG) 2>&1 + +$(CBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV3_TARBALL) + @echo "Unpacking coreboot v3..." + @ mkdir -p $(CBV3_DIR) + @ tar -C $(CBV3_DIR) -zxf $(SOURCE_DIR)/$(CBV3_TARBALL) + @ touch $@ + +$(CBV3_STAMP_DIR)/.patched: $(CBV3_STAMP_DIR)/.unpacked + @ echo "Patching coreboot v3..." + @ $(BIN_DIR)/doquilt.sh $(CBV3_SRC_DIR) $(CBV3_PATCHES) + @ touch $@ + +$(CBV3_STAMP_DIR)/.configured: $(CBV3_STAMP_DIR)/.patched + @ echo "Configuring coreboot v3..." + @ cp $(PACKAGE_DIR)/coreboot-v3/conf/$(CBV3_CONFIG) $(CBV3_SRC_DIR)/.config + @ make -C $(CBV3_SRC_DIR) oldconfig > $(CBV3_CONFIG_LOG) 2>&1 + @ touch $@ + +$(CBV3_OUTPUT): $(CBV3_STAMP_DIR)/.configured + @ echo "Building coreboot v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) > $(CBV3_BUILD_LOG) 2>&1 + +$(CBV3_SRC_DIR)/build/util/lar/lar: $(CBV3_STAMP_DIR)/.configured + @ $(MAKE) -C $(CBV3_SRC_DIR)/util lar > $(CBV3_BUILD_LOG) 2>&1 + +$(STAGING_DIR)/bin/lar: $(CBV3_SRC_DIR)/build/util/lar/lar + @ mkdir -p $(STAGING_DIR)/bin + @ cp $< $@ + + +$(CBV3_STAMP_DIR) $(CBV3_LOG_DIR): + @ mkdir -p $@ + +coreboot-v3: $(CBV3_LOG_DIR) $(CBV3_STAMP_DIR) $(CBV3_OUTPUT) $(STAGING_DIR)/bin/lar + +coreboot-v3-clean: + @ echo "Cleaning coreboot v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) clean > /dev/null 2>&1 + +coreboot-v3-distclean: + @ rm -rf $(CBV3_DIR)/* + @ rm -rf $(STAGING_DIR)/bin/lar + Deleted: buildrom-devel/packages/coreboot-v3/linuxbiosv3.mk =================================================================== --- buildrom-devel/packages/coreboot-v3/linuxbiosv3.mk 2008-01-18 17:01:03 UTC (rev 97) +++ buildrom-devel/packages/coreboot-v3/linuxbiosv3.mk 2008-01-18 17:06:48 UTC (rev 98) @@ -1,76 +0,0 @@ -ifeq ($(CBV3_TAG),) -$(error You need to specify a version to pull in your platform config) -endif - -CBV3_URL=svn://coreboot.org/repository/coreboot-v3 -CBV3_TARBALL=coreboot-svn-$(CBV3_TAG).tar.gz -CBV3_DIR=$(BUILD_DIR)/coreboot-v3 -CBV3_SRC_DIR=$(CBV3_DIR)/svn - -CBV3_STAMP_DIR=$(CBV3_DIR)/stamps -CBV3_LOG_DIR=$(CBV3_DIR)/logs - -ifeq ($(CONFIG_VERBOSE),y) -CBV3_FETCH_LOG=/dev/stdout -CBV3_CONFIG_LOG=/dev/stdout -CBV3_BUILD_LOG=/dev/stdout -else -CBV3_FETCH_LOG=$(CBV3_LOG_DIR)/fetch.log -CBV3_CONFIG_LOG=$(CBV3_LOG_DIR)/config.log -CBV3_BUILD_LOG=$(CBV3_LOG_DIR)/build.log -endif - -TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom - -CBV3_OUTPUT=$(CBV3_SRC_DIR)/build/coreboot.rom - -CBV3_PATCHES ?= - -$(SOURCE_DIR)/$(CBV3_TARBALL): - @ mkdir -p $(SOURCE_DIR)/coreboot-v3 - @ $(BIN_DIR)/fetchsvn.sh $(CBV3_URL) \ - $(SOURCE_DIR)/coreboot-v3 $(CBV3_TAG) \ - $@ > $(CBV3_FETCH_LOG) 2>&1 - -$(CBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV3_TARBALL) - @echo "Unpacking coreboot v3..." - @ mkdir -p $(CBV3_DIR) - @ tar -C $(CBV3_DIR) -zxf $(SOURCE_DIR)/$(CBV3_TARBALL) - @ touch $@ - -$(CBV3_STAMP_DIR)/.patched: $(CBV3_STAMP_DIR)/.unpacked - @ echo "Patching coreboot v3..." - @ $(BIN_DIR)/doquilt.sh $(CBV3_SRC_DIR) $(CBV3_PATCHES) - @ touch $@ - -$(CBV3_STAMP_DIR)/.configured: $(CBV3_STAMP_DIR)/.patched - @ echo "Configuring coreboot v3..." - @ cp $(PACKAGE_DIR)/coreboot-v3/conf/$(CBV3_CONFIG) $(CBV3_SRC_DIR)/.config - @ make -C $(CBV3_SRC_DIR) oldconfig > $(CBV3_CONFIG_LOG) 2>&1 - @ touch $@ - -$(CBV3_OUTPUT): $(CBV3_STAMP_DIR)/.configured - @ echo "Building coreboot v3..." - @ $(MAKE) -C $(CBV3_SRC_DIR) > $(CBV3_BUILD_LOG) 2>&1 - -$(CBV3_SRC_DIR)/build/util/lar/lar: $(CBV3_STAMP_DIR)/.configured - @ $(MAKE) -C $(CBV3_SRC_DIR)/util lar > $(CBV3_BUILD_LOG) 2>&1 - -$(STAGING_DIR)/bin/lar: $(CBV3_SRC_DIR)/build/util/lar/lar - @ mkdir -p $(STAGING_DIR)/bin - @ cp $< $@ - - -$(CBV3_STAMP_DIR) $(CBV3_LOG_DIR): - @ mkdir -p $@ - -coreboot-v3: $(CBV3_LOG_DIR) $(CBV3_STAMP_DIR) $(CBV3_OUTPUT) $(STAGING_DIR)/bin/lar - -coreboot-v3-clean: - @ echo "Cleaning coreboot v3..." - @ $(MAKE) -C $(CBV3_SRC_DIR) clean > /dev/null 2>&1 - -coreboot-v3-distclean: - @ rm -rf $(CBV3_DIR)/* - @ rm -rf $(STAGING_DIR)/bin/lar -

1 0

r97 - buildrom-devel/packages
by svn＠openbios.org 18 Jan '08

18 Jan '08

Author: jcrouse Date: 2008-01-18 18:01:03 +0100 (Fri, 18 Jan 2008) New Revision: 97 Added: buildrom-devel/packages/coreboot-v2/ buildrom-devel/packages/coreboot-v3/ Removed: buildrom-devel/packages/linuxbios/ buildrom-devel/packages/linuxbiosv3/ Log: Rename linuxbios and linuxbiosv3 to coreboot-v2 and coreboot-v3 respectively

1 0

r96 - in buildrom-devel: . config/platforms packages/linuxbios packages/linuxbiosv3 scripts
by svn＠openbios.org 18 Jan '08

18 Jan '08

Author: jcrouse Date: 2008-01-18 17:57:20 +0100 (Fri, 18 Jan 2008) New Revision: 96 Modified: buildrom-devel/Config.in buildrom-devel/Makefile buildrom-devel/README buildrom-devel/config/platforms/Config.in buildrom-devel/config/platforms/alix1c.conf buildrom-devel/config/platforms/db800.conf buildrom-devel/config/platforms/dbe61.conf buildrom-devel/config/platforms/ga-2761gxdk.conf buildrom-devel/config/platforms/m57sli.conf buildrom-devel/config/platforms/msm800sev.conf buildrom-devel/config/platforms/norwich.conf buildrom-devel/config/platforms/platforms.conf buildrom-devel/config/platforms/qemu.conf buildrom-devel/config/platforms/serengeti_cheetah.conf buildrom-devel/config/platforms/supermicro-h8dmr.conf buildrom-devel/config/platforms/tyan-s2882.conf buildrom-devel/config/platforms/tyan-s2891.conf buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk buildrom-devel/packages/linuxbios/generic-linuxbios.mk buildrom-devel/packages/linuxbios/linuxbios.inc buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk buildrom-devel/packages/linuxbios/norwich-linuxbios.mk buildrom-devel/packages/linuxbios/optionroms.inc buildrom-devel/packages/linuxbios/qemu.mk buildrom-devel/packages/linuxbios/serengeti_cheetah.mk buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk buildrom-devel/scripts/defconfig Log: [BUILDROM] rename LinuxBIOS to coreboot Rename linuxBIOS to coreboot and fix it so the naming is consistant between v2 and v3. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: buildrom-devel/Config.in =================================================================== --- buildrom-devel/Config.in 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/Config.in 2008-01-18 16:57:20 UTC (rev 96) @@ -45,24 +45,24 @@ endmenu -menu "LinuxBIOS configuration" +menu "coreboot configuration" choice - prompt "LinuxBIOS Version" - default LINUXBIOS_V2 + prompt "coreboot version" + default COREBOOT_V2 -config LINUXBIOS_V2 - bool "LinuxBIOS v2" +config COREBOOT_V2 + bool "coreboot v2" help - Select this option to build a .rom based on the LinuxBIOS + Select this option to build a .rom based on the coreboot v2 code. The v2 code is far more stable, and supports many different platforms. -config LINUXBIOS_V3 - bool "LinuxBIOS v3" +config COREBOOT_V3 + bool "coreboot v3" depends EXPERIMENTAL help - Select this option to build a LinuxBIOS v3 based ROM. This + Select this option to build a coreboot v3 based ROM. This is experimental, and only supports a few platforms. endchoice @@ -76,30 +76,30 @@ Precompress the payload with LZMA. This doesn't work for FILO, OFW, or ETHERBOOT. -config LB_USE_BUILD - bool "Specify a LinuxBIOS build dir" +config CB_USE_BUILD + bool "Specify a coreboot build dir" depends ADVANCED default n help Say 'y' here to specify an existing directory to build - LinuxBIOS from - this is useful if you have local development + coreboot from - this is useful if you have local development tree you wish to work from -config LB_BUILDDIR - string "LinuxBIOS build directory" - depends LB_USE_BUILD +config CB_BUILDDIR + string "coreboot build directory" + depends CB_USE_BUILD -config LB_CUSTOM_REV - bool "Override the platform LinuxBIOS revision" - depends ADVANCED && !LB_USE_BUILD +config CB_CUSTOM_REV + bool "Override the platform coreboot revision" + depends ADVANCED && !CB_USE_BUILD default n help - Say 'y' here to overide the default LinuxBIOS SVN revsion + Say 'y' here to overide the default coreboot SVN revsion from the platform configuration -config LB_REVISION - string "LinuxBIOS revision" - depends LB_CUSTOM_REV +config CB_REVISION + string "coreboot revision" + depends CB_CUSTOM_REV endmenu Modified: buildrom-devel/Makefile =================================================================== --- buildrom-devel/Makefile 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/Makefile 2008-01-18 16:57:20 UTC (rev 96) @@ -46,15 +46,15 @@ TARGET_ROM ?= linuxbios.rom TARGET_ROM_FILE=$(OUTPUT_DIR)/$(TARGET_ROM) -# Choose the version of LinuxBIOS to build - this might be better +# Choose the version of coreboot to build - this might be better # elsewhere, but what the heck - its easy. -LINUXBIOS-$(CONFIG_LINUXBIOS_V2) = linuxbios -LINUXBIOS-$(CONFIG_LINUXBIOS_V3) = linuxbiosv3 roms +COREBOOT-$(CONFIG_COREBOOT_V2) = coreboot +COREBOOT-$(CONFIG_COREBOOT_V3) = coreboot-v3 roms # Construct the list of packages we will be building -PKGLIST = $(LINUXBIOS-y) $(PAYLOAD-y) $(HOSTTOOLS-y) +PKGLIST = $(COREBOOT-y) $(PAYLOAD-y) $(HOSTTOOLS-y) # Construct the various targets @@ -62,14 +62,14 @@ PKG_distclean=$(patsubst %, %-distclean, $(PKGLIST)) # This is the top level target - for v2, the final deliverable is built -# by LinuxBIOS, for v3 it is built by us, so we have ifdef magic here +# by coreboot, for v3 it is built by us, so we have ifdef magic here -ifeq ($(CONFIG_LINUXBIOS_V2),y) -rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y) +ifeq ($(CONFIG_COREBOOT_V2),y) +rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) else -rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y) - @ cp $(LBV3_OUTPUT) $(TARGET_ROM_FILE) +rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) + @ cp $(CBV3_OUTPUT) $(TARGET_ROM_FILE) @ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(PAYLOAD_TARGET):normal/payload @ for file in `ls $(ROM_DIR)`; do \ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(ROM_DIR)/$$file:$$file; \ @@ -96,14 +96,14 @@ MKTARGETS:= $(shell ls $(PACKAGE_DIR)/*/*.mk) -include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/linuxbios/% $(PACKAGE_DIR)/linuxbiosv3/%,$(MKTARGETS)) +include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/coreboot-v2/% $(PACKAGE_DIR)/coreboot-v3/%,$(MKTARGETS)) include $(KERNEL_MK) -ifeq ($(CONFIG_LINUXBIOS_V2),y) -include $(LBV2_MK) +ifeq ($(CONFIG_COREBOOT_V2),y) +include $(CBV2_MK) else -include $(PACKAGE_DIR)/linuxbiosv3/linuxbiosv3.mk +include $(PACKAGE_DIR)/coreboot-v3/coreboot-v3.mk endif endif Modified: buildrom-devel/README =================================================================== --- buildrom-devel/README 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/README 2008-01-18 16:57:20 UTC (rev 96) @@ -6,10 +6,10 @@ Introduction This is a simple makefile system that designed to build a ROM image for -LinuxBIOS based systems. This system allows one to choose one of several -different payloads for a variety of platforms. The intention of buildROM -is to build everything together with one step, rather then the 6 or 8 -individual steps that it would have taken previously. +coreboot (formally LinuxBIOS) based systems. This system allows one to +choose one of several different payloads for a variety of platforms. +The intention of buildROM is to build everything together with one step, +rather then the 6 or 8 individual steps that it would have taken previously. Payloads @@ -30,11 +30,11 @@ CONFIG_VERBOSE - show build output on stdout instead of a log file CONFIG_ADVANCED - select some advanced options: - CONFIG_USE_LZMA - Compress payloads with LZMA (requires LB support) - CONFIG_LB_USE_BUILD - Say 'y' here to specify an existing build - directory for LinuxBIOS. This is useful if you + CONFIG_USE_LZMA - Compress payloads with LZMA (requires coreboot support) + CONFIG_CB_USE_BUILD - Say 'y' here to specify an existing build + directory for coreboot. This is useful if you want build out of your development tree. - CONFIG_LB_BUILDDIR - Specify your remote LinuxBIOS build directory here + CONFIG_CB_BUILDDIR - Specify your remote coreboot build directory here Some of the payload options have their own configuration: Modified: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel/config/platforms/Config.in 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/Config.in 2008-01-18 16:57:20 UTC (rev 96) @@ -17,7 +17,7 @@ config VENDOR_GIGABYTE bool "GIGABYTE" - depends LINUXBIOS_V2 + depends COREBOOT_V2 config VENDOR_PC_ENGINES bool "PC Engines" @@ -27,11 +27,11 @@ config VENDOR_SUPERMICRO bool "Supermicro" - depends LINUXBIOS_V2 + depends COREBOOT_V2 config VENDOR_TYAN bool "Tyan" - depends LINUXBIOS_V2 + depends COREBOOT_V2 endchoice @@ -64,34 +64,34 @@ config PLATFORM_DB800 bool "AMD DB800" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM config PLATFORM_GA_M57SLI_S4 bool "GIGABYTE GA-M57SLI-S4" depends VENDOR_GIGABYTE - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_GA_2761GXDK bool "GIGABYTE GA-2761GXDK" depends VENDOR_GIGABYTE - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2882 bool "Tyan S2882" depends VENDOR_TYAN - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2891 bool "Tyan S2891" depends VENDOR_TYAN - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT @@ -103,21 +103,21 @@ config PLATFORM_SERENGETI_CHEETAH bool "AMD Serengeti-Cheetah" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_SUPERMICRO_H8DMR bool "Supermicro H8DMR" depends VENDOR_SUPERMICRO - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_CHEETAH_FAM10 bool "AMD Serengeti-Cheetah with fam10 processor" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT endchoice Modified: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel/config/platforms/alix1c.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/alix1c.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/alix1c-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk # kernel configuration (for LAB) @@ -23,14 +23,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=pcengines -LINUXBIOS_BOARD=alix1c -LBV2_CONFIG=Config.lb -LBV2_TDIR=alix1c -LBV2_TAG=3047 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=pcengines +COREBOOT_BOARD=alix1c +CBV2_CONFIG=Config.lb +CBV2_TDIR=alix1c +CBV2_TAG=3047 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel/config/platforms/db800.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/db800.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -14,7 +14,7 @@ # Use the same settings as the Norwich platform KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) # Use the same settings as the Norwich platform @@ -26,14 +26,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LINUXBIOS_BOARD=db800 -LBV2_CONFIG=Config.lb -LBV2_TDIR=db800 -LBV2_TAG=2810 -LINUXBIOS_ROM_NAME=db800.rom +COREBOOT_VENDOR=amd +COREBOOT_BOARD=db800 +CBV2_CONFIG=Config.lb +CBV2_TDIR=db800 +CBV2_TAG=2810 +COREBOOT_ROM_NAME=db800.rom # FILO configuration # Use a new FILO config for the DB800 to autoload an image Modified: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel/config/platforms/dbe61.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/dbe61.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -14,7 +14,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) @@ -25,14 +25,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=artecgroup -LINUXBIOS_BOARD=dbe61 -LBV2_CONFIG=Config.lb -LBV2_TDIR=dbe61 -LBV2_TAG=2728 -LINUXBIOS_ROM_NAME=dbe61.rom +COREBOOT_VENDOR=artecgroup +COREBOOT_BOARD=dbe61 +CBV2_CONFIG=Config.lb +CBV2_TDIR=dbe61 +CBV2_TAG=2728 +COREBOOT_ROM_NAME=dbe61.rom # FILO configuration Modified: buildrom-devel/config/platforms/ga-2761gxdk.conf =================================================================== --- buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -18,7 +18,7 @@ # Disable for now - I don't know the right kernel for this platform #KERNEL_MK=$(PACKAGE_DIR)/kernel/ -LBV2_MK=$(PACKAGE_DIR)/linuxbios/ga-2761gxdk-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/ga-2761gxdk.mk # kernel configuration (for LAB) @@ -30,14 +30,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=gigabyte -LINUXBIOS_BOARD=ga_2761gxdk -LBV2_CONFIG=Config.lb -LBV2_TDIR=ga_2761gxdk -LBV2_TAG=2908 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=gigabyte +COREBOOT_BOARD=ga_2761gxdk +CBV2_CONFIG=Config.lb +CBV2_TDIR=ga_2761gxdk +CBV2_TAG=2908 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/m57sli.conf =================================================================== --- buildrom-devel/config/platforms/m57sli.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/m57sli.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/m57sli-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/m57sli-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/m57sli.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=gigabyte -LINUXBIOS_BOARD=m57sli -LBV2_CONFIG=Config.lb -LBV2_TDIR=m57sli -LBV2_TAG=2958 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=gigabyte +COREBOOT_BOARD=m57sli +CBV2_CONFIG=Config.lb +CBV2_TDIR=m57sli +CBV2_TAG=2958 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel/config/platforms/msm800sev.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/msm800sev.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/msm800sev-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk # kernel configuration (for LAB) @@ -24,14 +24,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=digitallogic -LINUXBIOS_BOARD=msm800sev -LBV2_CONFIG=Config.lb -LBV2_TDIR=msm800sev -LBV2_TAG=3047 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=digitallogic +COREBOOT_BOARD=msm800sev +CBV2_CONFIG=Config.lb +CBV2_TDIR=msm800sev +CBV2_TAG=3047 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel/config/platforms/norwich.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/norwich.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) @@ -24,14 +24,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LINUXBIOS_BOARD=norwich -LBV2_CONFIG=Config.lb -LBV2_TDIR=norwich -LBV2_TAG=2810 -LINUXBIOS_ROM_NAME=norwich.rom +COREBOOT_VENDOR=amd +COREBOOT_BOARD=norwich +CBV2_CONFIG=Config.lb +CBV2_TDIR=norwich +CBV2_TAG=2810 +COREBOOT_ROM_NAME=norwich.rom # FILO configuration Modified: buildrom-devel/config/platforms/platforms.conf =================================================================== --- buildrom-devel/config/platforms/platforms.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/platforms.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -1,7 +1,7 @@ # This will include the correct configuration for the # selected platform -LBV2_MK=$(PACKAGE_DIR)/linuxbios/generic-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/generic.mk ##Include the correct platform configuration Modified: buildrom-devel/config/platforms/qemu.conf =================================================================== --- buildrom-devel/config/platforms/qemu.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/qemu.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/qemu-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/qemu.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/qemu.mk # kernel configuration (for LAB) @@ -23,19 +23,19 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOSv2 configuration -LBV2_TAG=2950 -LBV2_CONFIG=Config.lb -LINUXBIOS_ROM_NAME=qemu.rom +# coreboot-v2 configuration +CBV2_TAG=2950 +CBV2_CONFIG=Config.lb +COREBOOT_ROM_NAME=qemu.rom +CBV2_TDIR=qemu-i386 -# LinuxBIOS v3 configuration -LBV3_CONFIG=qemu-i386-defconfig -LBV3_TAG=HEAD -LBV3_ROM_NAME=linuxbios.rom +# coreboot v3 configuration +CBV3_CONFIG=qemu-i386-defconfig +CBV3_TAG=HEAD +CBV3_ROM_NAME=linuxbios.rom -LINUXBIOS_VENDOR=emulation -LINUXBIOS_BOARD=qemu-i386 -LBV2_TDIR=qemu-i386 +COREBOOT_VENDOR=emulation +COREBOOT_BOARD=qemu-i386 # FILO configuration Modified: buildrom-devel/config/platforms/serengeti_cheetah.conf =================================================================== --- buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -18,7 +18,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/serengeti_cheetah-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/serengeti_cheetah.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/serengeti_cheetah.mk # kernel configuration (for LAB) @@ -40,22 +40,22 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LBV2_CONFIG=Config.lb +COREBOOT_VENDOR=amd +CBV2_CONFIG=Config.lb ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y) -LINUXBIOS_BOARD=serengeti_cheetah_fam10 -LBV2_TDIR=serengeti_cheetah_fam10 -LBV2_TAG=3018 -LINUXBIOS_ROM_NAME=amd-cheetah-fam10.rom +COREBOOT_BOARD=serengeti_cheetah_fam10 +CBV2_TDIR=serengeti_cheetah_fam10 +CBV2_TAG=3018 +COREBOOT_ROM_NAME=amd-cheetah-fam10.rom else -LINUXBIOS_BOARD=serengeti_cheetah -LBV2_CONFIG=Config.lb -LBV2_TDIR=serengeti_cheetah -LBV2_TAG=2950 -LINUXBIOS_ROM_NAME=serengeti_cheetah.rom +COREBOOT_BOARD=serengeti_cheetah +CBV2_CONFIG=Config.lb +CBV2_TDIR=serengeti_cheetah +CBV2_TAG=2950 +COREBOOT_ROM_NAME=serengeti_cheetah.rom endif # FILO configuration Modified: buildrom-devel/config/platforms/supermicro-h8dmr.conf =================================================================== --- buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/supermicro-h8dmr-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/supermicro-h8dmr-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/supermicro-h8dmr.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=supermicro -LINUXBIOS_BOARD=h8dmr -LBV2_CONFIG=Config.lb -LBV2_TDIR=h8dmr -LBV2_TAG=2996 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=supermicro +COREBOOT_BOARD=h8dmr +CBV2_CONFIG=Config.lb +CBV2_TDIR=h8dmr +CBV2_TAG=2996 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/tyan-s2882.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2882.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/tyan-s2882.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2882-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2882-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2882.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=tyan -LINUXBIOS_BOARD=s2882 -LBV2_CONFIG=Config.lb -LBV2_TDIR=s2882 -LBV2_TAG=2887 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=tyan +COREBOOT_BOARD=s2882 +CBV2_CONFIG=Config.lb +CBV2_TDIR=s2882 +CBV2_TAG=2887 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/config/platforms/tyan-s2891.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2891.conf 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/config/platforms/tyan-s2891.conf 2008-01-18 16:57:20 UTC (rev 96) @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2891-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2891-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2891.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=tyan -LINUXBIOS_BOARD=s2891 -LBV2_CONFIG=Config.lb -LBV2_TDIR=s2891 -LBV2_TAG=2792 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=tyan +COREBOOT_BOARD=s2891 +CBV2_CONFIG=Config.lb +CBV2_TDIR=s2891 +CBV2_TAG=2792 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Modified: buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES=$(PACKAGE_DIR)/linuxbios/patches/2761gxdk-fix-target.patch +CBV2_PATCHES=$(PACKAGE_DIR)/coreboot-v2/patches/2761gxdk-fix-target.patch -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc # This matches the base name of the ROM on -# http://www.linuxbios.org/data/optionroms/ +# http://www.coreboot.org/data/optionroms/ OPTIONROM_ID = pci1039,6330 -include $(PACKAGE_DIR)/linuxbios/optionroms.inc +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/generic-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,42 +1,42 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom # This is the list of components that comprise the ROM (excluding the payload) -LBV2_COMPONENTS = $(LBV2_OUTPUT) +CBV2_COMPONENTS = $(CBV2_OUTPUT) -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc # If an optionrom was specified in the configuration, then use it ifneq ($(OPTIONROM_ID),) -include $(PACKAGE_DIR)/linuxbios/optionroms.inc +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc -# Add it to the front of the list so it is prepended to the LinuxBIOS output -LBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_COMPONENTS) +# Add it to the front of the list so it is prepended to the coreboot output +CBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_COMPONENTS) endif -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_COMPONENTS) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_COMPONENTS) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_COMPONENTS) > $@ + @ cat $(CBV2_COMPONENTS) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/linuxbios.inc =================================================================== --- buildrom-devel/packages/linuxbios/linuxbios.inc 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/linuxbios.inc 2008-01-18 16:57:20 UTC (rev 96) @@ -1,100 +1,100 @@ # This is the common code included by all the targets ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LINUXBIOS_VENDOR),) -$(error No LinuxBIOS vendor specified) +ifeq ($(COREBOOT_VENDOR),) +$(error No coreboot vendor specified) endif -ifeq ($(LINUXBIOS_BOARD),) -$(error No LinuxBIOS board specified) +ifeq ($(COREBOOT_BOARD),) +$(error No coreboot board specified) endif -ifeq ($(LBV2_CONFIG),) -$(error No LinuxBIOS config specified) +ifeq ($(CBV2_CONFIG),) +$(error No coreboot config specified) endif -ifeq ($(LBV2_TDIR),) -$(error No LinuxBIOS TDIR specified) +ifeq ($(CBV2_TDIR),) +$(error No coreboot TDIR specified) endif endif -LBV2_OUTPUT=$(LBV2_BUILD_DIR)/$(LINUXBIOS_ROM_NAME) -LBV2_DIR=$(BUILD_DIR)/linuxbios +CBV2_OUTPUT=$(CBV2_BUILD_DIR)/$(COREBOOT_ROM_NAME) +CBV2_DIR=$(BUILD_DIR)/coreboot # If the user wanted to override the build directory - obey that now -ifeq ($(CONFIG_LB_USE_BUILD),y) -LBV2_SRC_DIR=$(subst ",,$(CONFIG_LB_BUILDDIR)) +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_SRC_DIR=$(subst ",,$(CONFIG_CB_BUILDDIR)) else -LBV2_SRC_DIR=$(LBV2_DIR)/$(LBV2_BASE_DIR) +CBV2_SRC_DIR=$(CBV2_DIR)/$(CBV2_BASE_DIR) endif -LBV2_TARGET_DIR=$(LBV2_SRC_DIR)/targets/ -LBV2_TARGET_NAME=$(LINUXBIOS_VENDOR)/$(LINUXBIOS_BOARD) -LBV2_CONFIG_NAME=$(LBV2_TARGET_NAME)/$(LBV2_CONFIG) +CBV2_TARGET_DIR=$(CBV2_SRC_DIR)/targets/ +CBV2_TARGET_NAME=$(COREBOOT_VENDOR)/$(COREBOOT_BOARD) +CBV2_CONFIG_NAME=$(CBV2_TARGET_NAME)/$(CBV2_CONFIG) -LBV2_BUILD_DIR=$(LBV2_TARGET_DIR)/$(LBV2_TARGET_NAME)/$(LBV2_TDIR) +CBV2_BUILD_DIR=$(CBV2_TARGET_DIR)/$(CBV2_TARGET_NAME)/$(CBV2_TDIR) -LBV2_STAMP_DIR=$(LBV2_DIR)/stamps -LBV2_LOG_DIR=$(LBV2_DIR)/logs +CBV2_STAMP_DIR=$(CBV2_DIR)/stamps +CBV2_LOG_DIR=$(CBV2_DIR)/logs ifeq ($(CONFIG_VERBOSE),y) -LBV2_FETCH_LOG=/dev/stdout -LBV2_CONFIG_LOG=/dev/stdout -LBV2_BUILD_LOG=/dev/stdout -LBV2_INSTALL_LOG=/dev/stdout +CBV2_FETCH_LOG=/dev/stdout +CBV2_CONFIG_LOG=/dev/stdout +CBV2_BUILD_LOG=/dev/stdout +CBV2_INSTALL_LOG=/dev/stdout else -LBV2_FETCH_LOG=$(LBV2_LOG_DIR)/fetch.log -LBV2_BUILD_LOG=$(LBV2_LOG_DIR)/build.log -LBV2_CONFIG_LOG=$(LBV2_LOG_DIR)/config.log -LBV2_INSTALL_LOG=$(LBV2_LOG_DIR)/install.log +CBV2_FETCH_LOG=$(CBV2_LOG_DIR)/fetch.log +CBV2_BUILD_LOG=$(CBV2_LOG_DIR)/build.log +CBV2_CONFIG_LOG=$(CBV2_LOG_DIR)/config.log +CBV2_INSTALL_LOG=$(CBV2_LOG_DIR)/install.log endif # This allows us to skip the unpack/patch/configure stage -ifeq ($(CONFIG_LB_USE_BUILD),y) -LBV2_DIR_TARGET= +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_DIR_TARGET= else -LBV2_DIR_TARGET=$(LBV2_STAMP_DIR)/.configured +CBV2_DIR_TARGET=$(CBV2_STAMP_DIR)/.configured endif -$(LBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) +$(CBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) @ cp $< $@ -$(LBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV2_TARBALL) - @ echo "Unpacking LinuxBIOS..." - @ tar -C $(LBV2_DIR) -zxf $(SOURCE_DIR)/$(LBV2_TARBALL) +$(CBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV2_TARBALL) + @ echo "Unpacking coreboot..." + @ tar -C $(CBV2_DIR) -zxf $(SOURCE_DIR)/$(CBV2_TARBALL) @ touch $@ -$(LBV2_STAMP_DIR)/.patched: $(LBV2_STAMP_DIR)/.unpacked - @ echo "Patching LinuxBIOS..." - @ $(BIN_DIR)/doquilt.sh $(LBV2_SRC_DIR) $(LBV2_PATCHES) +$(CBV2_STAMP_DIR)/.patched: $(CBV2_STAMP_DIR)/.unpacked + @ echo "Patching coreboot..." + @ $(BIN_DIR)/doquilt.sh $(CBV2_SRC_DIR) $(CBV2_PATCHES) @ touch $@ -$(LBV2_STAMP_DIR)/.configured: $(LBV2_STAMP_DIR)/.patched +$(CBV2_STAMP_DIR)/.configured: $(CBV2_STAMP_DIR)/.patched @ echo "Building target..." - @( cd $(LBV2_TARGET_DIR); \ - ./buildtarget $(LBV2_CONFIG_NAME) > $(LBV2_CONFIG_LOG) 2>&1) + @( cd $(CBV2_TARGET_DIR); \ + ./buildtarget $(CBV2_CONFIG_NAME) > $(CBV2_CONFIG_LOG) 2>&1) @ touch $@ -$(LBV2_STAMP_DIR) $(LBV2_LOG_DIR): +$(CBV2_STAMP_DIR) $(CBV2_LOG_DIR): @ mkdir -p $@ -$(LBV2_OUTPUT): $(LBV2_STAMP_DIR) $(LBV2_LOG_DIR) $(LBV2_DIR_TARGET) $(LBV2_PAYLOAD_TARGET) - @ echo "Building linuxbios..." +$(CBV2_OUTPUT): $(CBV2_STAMP_DIR) $(CBV2_LOG_DIR) $(CBV2_DIR_TARGET) $(CBV2_PAYLOAD_TARGET) + @ echo "Building coreboot..." @ (export CPU_OPT="$(STACKPROTECT)"; \ - make -C $(LBV2_BUILD_DIR) > $(LBV2_BUILD_LOG) 2>&1) + make -C $(CBV2_BUILD_DIR) > $(CBV2_BUILD_LOG) 2>&1) -generic-linuxbios-clean: - @ echo "Cleaning linuxbios..." - @ rm -f $(LBV2_PAYLOAD_TARGET) - @ if [ -d $(LBV2_BUILD_DIR) ];then \ - $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \ +generic-coreboot-clean: + @ echo "Cleaning coreboot..." + @ rm -f $(CBV2_PAYLOAD_TARGET) + @ if [ -d $(CBV2_BUILD_DIR) ];then \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ fi - @ rm -f $(LBV2_OUTPUT) + @ rm -f $(CBV2_OUTPUT) -generic-linuxbios-distclean: - @ if [ "$(CONFIG_LB_USE_BUILD)" = "y" ]; then \ - echo "Cleaning linuxbios build..."; \ - $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \ - rm -f $(LBV2_OUTPUT); \ +generic-coreboot-distclean: + @ if [ "$(CONFIG_CB_USE_BUILD)" = "y" ]; then \ + echo "Cleaning coreboot build..."; \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ + rm -f $(CBV2_OUTPUT); \ fi - @ rm -rf $(LBV2_DIR)/* + @ rm -rf $(CBV2_DIR)/* Modified: buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,49 +1,49 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES= +CBV2_PATCHES= ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,40 +1,40 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) else -$(warning You specified $(LBV2_TAG) a version to pull in your platform config) +$(warning You specified $(CBV2_TAG) a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS rev $(LBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/optionroms.inc =================================================================== --- buildrom-devel/packages/linuxbios/optionroms.inc 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/optionroms.inc 2008-01-18 16:57:20 UTC (rev 96) @@ -1,7 +1,7 @@ -# Rules to download option roms from the LinuxBIOS option rom +# Rules to download option roms from the coreboot option ROM(s) # repository -OPTIONROMURL=http://www.linuxbios.org/data/optionroms/ +OPTIONROMURL=http://coreboot.org/data/optionroms/ $(OUTPUT_DIR)/$(OPTIONROM_ID).license: @ mkdir -p $(OUTPUT_DIR) Modified: buildrom-devel/packages/linuxbios/qemu.mk =================================================================== --- buildrom-devel/packages/linuxbios/qemu.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/qemu.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,40 +1,40 @@ -# This is the QEMU LinuxBIOS target +# This is the QEMU coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = -LBV2_BASE_DIR=svn -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf ifeq ($(CONFIG_PAYLOAD_LAB),y) -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-lab.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-lab.patch else -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-payload.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-payload.patch endif -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_SVN_DIR=$(SOURCE_DIR)/linuxbios +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_SVN_DIR=$(SOURCE_DIR)/coreboot -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(LBV2_SVN_DIR) \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(CBV2_SVN_DIR) \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) @ cp $< $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/serengeti_cheetah.mk =================================================================== --- buildrom-devel/packages/linuxbios/serengeti_cheetah.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/serengeti_cheetah.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,58 +1,58 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = # Make sure we have the tools we need to accomplish this HAVE_IASL:=$(call find-tool,iasl) ifeq ($(HAVE_IASL),n) -$(error To build LinuxBIOS, you need to install the 'iasl' tool) +$(error To build coreboot, you need to install the 'iasl' tool) endif ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y) ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah_fam10-lab.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah_fam10-lab.patch endif endif ifeq ($(CONFIG_PLATFORM_SERENGETI_CHEETAH),y) ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-lab.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-lab.patch else - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-payload.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-payload.patch endif ifeq ($(CONFIG_SIMNOW),y) -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/simnow.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/simnow.patch endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) @ cp $< $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,49 +1,49 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,45 +1,45 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-filo-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-filo-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,45 +1,45 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-filo-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-filo-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Modified: buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk =================================================================== --- buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-18 16:57:20 UTC (rev 96) @@ -1,76 +1,76 @@ -ifeq ($(LBV3_TAG),) +ifeq ($(CBV3_TAG),) $(error You need to specify a version to pull in your platform config) endif -LBV3_URL=svn://openbios.org/repository/LinuxBIOSv3 -LBV3_TARBALL=linuxbios-svn-$(LBV3_TAG).tar.gz -LBV3_DIR=$(BUILD_DIR)/linuxbiosv3 -LBV3_SRC_DIR=$(LBV3_DIR)/svn +CBV3_URL=svn://coreboot.org/repository/coreboot-v3 +CBV3_TARBALL=coreboot-svn-$(CBV3_TAG).tar.gz +CBV3_DIR=$(BUILD_DIR)/coreboot-v3 +CBV3_SRC_DIR=$(CBV3_DIR)/svn -LBV3_STAMP_DIR=$(LBV3_DIR)/stamps -LBV3_LOG_DIR=$(LBV3_DIR)/logs +CBV3_STAMP_DIR=$(CBV3_DIR)/stamps +CBV3_LOG_DIR=$(CBV3_DIR)/logs ifeq ($(CONFIG_VERBOSE),y) -LBV3_FETCH_LOG=/dev/stdout -LBV3_CONFIG_LOG=/dev/stdout -LBV3_BUILD_LOG=/dev/stdout +CBV3_FETCH_LOG=/dev/stdout +CBV3_CONFIG_LOG=/dev/stdout +CBV3_BUILD_LOG=/dev/stdout else -LBV3_FETCH_LOG=$(LBV3_LOG_DIR)/fetch.log -LBV3_CONFIG_LOG=$(LBV3_LOG_DIR)/config.log -LBV3_BUILD_LOG=$(LBV3_LOG_DIR)/build.log +CBV3_FETCH_LOG=$(CBV3_LOG_DIR)/fetch.log +CBV3_CONFIG_LOG=$(CBV3_LOG_DIR)/config.log +CBV3_BUILD_LOG=$(CBV3_LOG_DIR)/build.log endif -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -LBV3_OUTPUT=$(LBV3_SRC_DIR)/build/linuxbios.rom +CBV3_OUTPUT=$(CBV3_SRC_DIR)/build/coreboot.rom -LBV3_PATCHES ?= +CBV3_PATCHES ?= -$(SOURCE_DIR)/$(LBV3_TARBALL): - @ mkdir -p $(SOURCE_DIR)/linuxbiosv3 - @ $(BIN_DIR)/fetchsvn.sh $(LBV3_URL) \ - $(SOURCE_DIR)/linuxbiosv3 $(LBV3_TAG) \ - $@ > $(LBV3_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV3_TARBALL): + @ mkdir -p $(SOURCE_DIR)/coreboot-v3 + @ $(BIN_DIR)/fetchsvn.sh $(CBV3_URL) \ + $(SOURCE_DIR)/coreboot-v3 $(CBV3_TAG) \ + $@ > $(CBV3_FETCH_LOG) 2>&1 -$(LBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV3_TARBALL) - @echo "Unpacking LinuxBIOSv3..." - @ mkdir -p $(LBV3_DIR) - @ tar -C $(LBV3_DIR) -zxf $(SOURCE_DIR)/$(LBV3_TARBALL) +$(CBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV3_TARBALL) + @echo "Unpacking coreboot v3..." + @ mkdir -p $(CBV3_DIR) + @ tar -C $(CBV3_DIR) -zxf $(SOURCE_DIR)/$(CBV3_TARBALL) @ touch $@ -$(LBV3_STAMP_DIR)/.patched: $(LBV3_STAMP_DIR)/.unpacked - @ echo "Patching LinuxBIOSv3..." - @ $(BIN_DIR)/doquilt.sh $(LBV3_SRC_DIR) $(LBV3_PATCHES) +$(CBV3_STAMP_DIR)/.patched: $(CBV3_STAMP_DIR)/.unpacked + @ echo "Patching coreboot v3..." + @ $(BIN_DIR)/doquilt.sh $(CBV3_SRC_DIR) $(CBV3_PATCHES) @ touch $@ -$(LBV3_STAMP_DIR)/.configured: $(LBV3_STAMP_DIR)/.patched - @ echo "Configuring LinuxBIOSv3..." - @ cp $(PACKAGE_DIR)/linuxbiosv3/conf/$(LBV3_CONFIG) $(LBV3_SRC_DIR)/.config - @ make -C $(LBV3_SRC_DIR) oldconfig > $(LBV3_CONFIG_LOG) 2>&1 +$(CBV3_STAMP_DIR)/.configured: $(CBV3_STAMP_DIR)/.patched + @ echo "Configuring coreboot v3..." + @ cp $(PACKAGE_DIR)/coreboot-v3/conf/$(CBV3_CONFIG) $(CBV3_SRC_DIR)/.config + @ make -C $(CBV3_SRC_DIR) oldconfig > $(CBV3_CONFIG_LOG) 2>&1 @ touch $@ -$(LBV3_OUTPUT): $(LBV3_STAMP_DIR)/.configured - @ echo "Building LinuxBIOSv3..." - @ $(MAKE) -C $(LBV3_SRC_DIR) > $(LBV3_BUILD_LOG) 2>&1 +$(CBV3_OUTPUT): $(CBV3_STAMP_DIR)/.configured + @ echo "Building coreboot v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) > $(CBV3_BUILD_LOG) 2>&1 -$(LBV3_SRC_DIR)/build/util/lar/lar: $(LBV3_STAMP_DIR)/.configured - @ $(MAKE) -C $(LBV3_SRC_DIR)/util lar > $(LBV3_BUILD_LOG) 2>&1 +$(CBV3_SRC_DIR)/build/util/lar/lar: $(CBV3_STAMP_DIR)/.configured + @ $(MAKE) -C $(CBV3_SRC_DIR)/util lar > $(CBV3_BUILD_LOG) 2>&1 -$(STAGING_DIR)/bin/lar: $(LBV3_SRC_DIR)/build/util/lar/lar +$(STAGING_DIR)/bin/lar: $(CBV3_SRC_DIR)/build/util/lar/lar @ mkdir -p $(STAGING_DIR)/bin @ cp $< $@ -$(LBV3_STAMP_DIR) $(LBV3_LOG_DIR): +$(CBV3_STAMP_DIR) $(CBV3_LOG_DIR): @ mkdir -p $@ -linuxbiosv3: $(LBV3_LOG_DIR) $(LBV3_STAMP_DIR) $(LBV3_OUTPUT) $(STAGING_DIR)/bin/lar +coreboot-v3: $(CBV3_LOG_DIR) $(CBV3_STAMP_DIR) $(CBV3_OUTPUT) $(STAGING_DIR)/bin/lar -linuxbiosv3-clean: - @ echo "Cleaning linuxbiosv3..." - @ $(MAKE) -C $(LBV3_SRC_DIR) clean > /dev/null 2>&1 +coreboot-v3-clean: + @ echo "Cleaning coreboot v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) clean > /dev/null 2>&1 -linuxbiosv3-distclean: - @ rm -rf $(LBV3_DIR)/* +coreboot-v3-distclean: + @ rm -rf $(CBV3_DIR)/* @ rm -rf $(STAGING_DIR)/bin/lar Modified: buildrom-devel/scripts/defconfig =================================================================== --- buildrom-devel/scripts/defconfig 2008-01-11 22:53:36 UTC (rev 95) +++ buildrom-devel/scripts/defconfig 2008-01-18 16:57:20 UTC (rev 96) @@ -8,11 +8,11 @@ # CONFIG_ADVANCED is not set # -# LinuxBIOS configuration +# coreboot configuration # CONFIG_USE_LZMA=y -# CONFIG_LB_USE_BUILD is not set -CONFIG_LB_BUILDDIR="" +# CONFIG_CB_USE_BUILD is not set +CONFIG_CB_BUILDDIR="" CONFIG_PLATFORM=y CONFIG_PAYLOAD=y

1 0

r3054 build service
by coreboot information 18 Jan '08

18 Jan '08

Dear coreboot readers! This is the automated build check service of coreboot. The developer "stepan" checked in revision 3054 to the coreboot source repository and caused the following changes: Change Log: for some reasons the externals did not get committed. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of amd:serengeti_cheetah_fam10 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3054&device=serengeti_che… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

next set of patches: modify the dtc and device code to support IDs
by ron minnich 18 Jan '08

18 Jan '08

This is the next set of changes for the dtc and device code to support device ids. They are minor but will make our lives easier. coreboot builds, I will try to test tonight. ron

3 4

[BUILDROM] coreboot rename
by Jordan Crouse 18 Jan '08

18 Jan '08

Okay, I am nearly certain to screw this up, so please bear with me. The attached patch is the rename patch to s/linuxbios/coreboot/ in buildrom. Applying this patch is the first stage. The second stage is to rename the files from their linuxbios counterpart to their coreboot counterpart using svn mv. * linuxbios/ is going to turn into coreboot-v2 * linuxbiosv3/ is going to turn into coreboot-v3 * all of the files with the -linuxbios*.mk postfix in linuxbios/ will have the -linuxbios part dropped (generic-linuxbios.mk) will be copied to just generic.mk. The attached patch should already reflect the new names. I wrote a test framework to check building all of the supported platforms for coreboot-v2 and FILO - and they all passed the renaming, though most failed due to stack-protect issues and/or other problems, which I will be fixing in subsequent patches. That doesn't mean that I did everything right, so please, for the love of crumbcake, please test and report failures! Lets try to only do this renaming thing once a decade, mkay? :) -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. [BUILDROM] rename LinuxBIOS to coreboot Rename linuxBIOS to coreboot and fix it so the naming is consistant between v2 and v3. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Index: buildrom-devel/Config.in =================================================================== --- buildrom-devel.orig/Config.in 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/Config.in 2008-01-17 16:34:10.000000000 -0700 @@ -45,24 +45,24 @@ endmenu -menu "LinuxBIOS configuration" +menu "coreboot configuration" choice - prompt "LinuxBIOS Version" - default LINUXBIOS_V2 + prompt "coreboot Version" + default COREBOOT_V2 -config LINUXBIOS_V2 - bool "LinuxBIOS v2" +config COREBOOT_V2 + bool "coreboot v2" help - Select this option to build a .rom based on the LinuxBIOS + Select this option to build a .rom based on the coreboot v2 code. The v2 code is far more stable, and supports many different platforms. -config LINUXBIOS_V3 - bool "LinuxBIOS v3" +config COREBOOT_V3 + bool "coreboot v3" depends EXPERIMENTAL help - Select this option to build a LinuxBIOS v3 based ROM. This + Select this option to build a coreboot v3 based ROM. This is experimental, and only supports a few platforms. endchoice @@ -76,30 +76,30 @@ Precompress the payload with LZMA. This doesn't work for FILO, OFW, or ETHERBOOT. -config LB_USE_BUILD - bool "Specify a LinuxBIOS build dir" +config CB_USE_BUILD + bool "Specify a coreboot build dir" depends ADVANCED default n help Say 'y' here to specify an existing directory to build - LinuxBIOS from - this is useful if you have local development + coreboot from - this is useful if you have local development tree you wish to work from -config LB_BUILDDIR - string "LinuxBIOS build directory" - depends LB_USE_BUILD - -config LB_CUSTOM_REV - bool "Override the platform LinuxBIOS revision" - depends ADVANCED && !LB_USE_BUILD +config CB_BUILDDIR + string "coreboot build directory" + depends CB_USE_BUILD + +config CB_CUSTOM_REV + bool "Override the platform coreboot revision" + depends ADVANCED && !CB_USE_BUILD default n help - Say 'y' here to overide the default LinuxBIOS SVN revsion + Say 'y' here to overide the default coreboot SVN revsion from the platform configuration -config LB_REVISION - string "LinuxBIOS revision" - depends LB_CUSTOM_REV +config CB_REVISION + string "coreboot revision" + depends CB_CUSTOM_REV endmenu Index: buildrom-devel/Makefile =================================================================== --- buildrom-devel.orig/Makefile 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/Makefile 2008-01-17 16:37:32.000000000 -0700 @@ -46,15 +46,15 @@ TARGET_ROM ?= linuxbios.rom TARGET_ROM_FILE=$(OUTPUT_DIR)/$(TARGET_ROM) -# Choose the version of LinuxBIOS to build - this might be better +# Choose the version of coreboot to build - this might be better # elsewhere, but what the heck - its easy. -LINUXBIOS-$(CONFIG_LINUXBIOS_V2) = linuxbios -LINUXBIOS-$(CONFIG_LINUXBIOS_V3) = linuxbiosv3 roms +COREBOOT-$(CONFIG_COREBOOT_V2) = coreboot +COREBOOT-$(CONFIG_COREBOOT_V3) = coreboot-v3 roms # Construct the list of packages we will be building -PKGLIST = $(LINUXBIOS-y) $(PAYLOAD-y) $(HOSTTOOLS-y) +PKGLIST = $(COREBOOT-y) $(PAYLOAD-y) $(HOSTTOOLS-y) # Construct the various targets @@ -62,14 +62,14 @@ PKG_distclean=$(patsubst %, %-distclean, $(PKGLIST)) # This is the top level target - for v2, the final deliverable is built -# by LinuxBIOS, for v3 it is built by us, so we have ifdef magic here +# by coreboot, for v3 it is built by us, so we have ifdef magic here -ifeq ($(CONFIG_LINUXBIOS_V2),y) -rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y) +ifeq ($(CONFIG_COREBOOT_V2),y) +rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) else -rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y) - @ cp $(LBV3_OUTPUT) $(TARGET_ROM_FILE) +rom: $(HOSTTOOLS-y) payload $(COREBOOT-y) + @ cp $(CBV3_OUTPUT) $(TARGET_ROM_FILE) @ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(PAYLOAD_TARGET):normal/payload @ for file in `ls $(ROM_DIR)`; do \ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(ROM_DIR)/$$file:$$file; \ @@ -96,14 +96,14 @@ MKTARGETS:= $(shell ls $(PACKAGE_DIR)/*/*.mk) -include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/linuxbios/% $(PACKAGE_DIR)/linuxbiosv3/%,$(MKTARGETS)) +include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/coreboot-v2/% $(PACKAGE_DIR)/coreboot-v3/%,$(MKTARGETS)) include $(KERNEL_MK) -ifeq ($(CONFIG_LINUXBIOS_V2),y) -include $(LBV2_MK) +ifeq ($(CONFIG_COREBOOT_V2),y) +include $(CBV2_MK) else -include $(PACKAGE_DIR)/linuxbiosv3/linuxbiosv3.mk +include $(PACKAGE_DIR)/coreboot-v3/coreboot-v3.mk endif endif Index: buildrom-devel/README =================================================================== --- buildrom-devel.orig/README 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/README 2008-01-17 16:34:10.000000000 -0700 @@ -6,10 +6,10 @@ Introduction This is a simple makefile system that designed to build a ROM image for -LinuxBIOS based systems. This system allows one to choose one of several -different payloads for a variety of platforms. The intention of buildROM -is to build everything together with one step, rather then the 6 or 8 -individual steps that it would have taken previously. +coreboot (formally LinuxBIOS) based systems. This system allows one to +choose one of several different payloads for a variety of platforms. +The intention of buildROM is to build everything together with one step, +rather then the 6 or 8 individual steps that it would have taken previously. Payloads @@ -30,11 +30,11 @@ CONFIG_VERBOSE - show build output on stdout instead of a log file CONFIG_ADVANCED - select some advanced options: - CONFIG_USE_LZMA - Compress payloads with LZMA (requires LB support) - CONFIG_LB_USE_BUILD - Say 'y' here to specify an existing build - directory for LinuxBIOS. This is useful if you + CONFIG_USE_LZMA - Compress payloads with LZMA (requires coreboot support) + CONFIG_CB_USE_BUILD - Say 'y' here to specify an existing build + directory for coreboot. This is useful if you want build out of your development tree. - CONFIG_LB_BUILDDIR - Specify your remote LinuxBIOS build directory here + CONFIG_CB_BUILDDIR - Specify your remote coreboot build directory here Some of the payload options have their own configuration: Index: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel.orig/config/platforms/Config.in 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/Config.in 2008-01-17 16:34:10.000000000 -0700 @@ -17,7 +17,7 @@ config VENDOR_GIGABYTE bool "GIGABYTE" - depends LINUXBIOS_V2 + depends COREBOOT_V2 config VENDOR_PC_ENGINES bool "PC Engines" @@ -27,11 +27,11 @@ config VENDOR_SUPERMICRO bool "Supermicro" - depends LINUXBIOS_V2 + depends COREBOOT_V2 config VENDOR_TYAN bool "Tyan" - depends LINUXBIOS_V2 + depends COREBOOT_V2 endchoice @@ -64,34 +64,34 @@ config PLATFORM_DB800 bool "AMD DB800" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM config PLATFORM_GA_M57SLI_S4 bool "GIGABYTE GA-M57SLI-S4" depends VENDOR_GIGABYTE - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_GA_2761GXDK bool "GIGABYTE GA-2761GXDK" depends VENDOR_GIGABYTE - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2882 bool "Tyan S2882" depends VENDOR_TYAN - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2891 bool "Tyan S2891" depends VENDOR_TYAN - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT @@ -103,21 +103,21 @@ config PLATFORM_SERENGETI_CHEETAH bool "AMD Serengeti-Cheetah" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_SUPERMICRO_H8DMR bool "Supermicro H8DMR" depends VENDOR_SUPERMICRO - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT config PLATFORM_CHEETAH_FAM10 bool "AMD Serengeti-Cheetah with fam10 processor" depends VENDOR_AMD - depends LINUXBIOS_V2 + depends COREBOOT_V2 select PLATFORM select PLATFORM_SUPPORT_64BIT endchoice Index: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel.orig/config/platforms/alix1c.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/alix1c.conf 2008-01-17 16:37:18.000000000 -0700 @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/alix1c-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk # kernel configuration (for LAB) @@ -23,14 +23,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=pcengines -LINUXBIOS_BOARD=alix1c -LBV2_CONFIG=Config.lb -LBV2_TDIR=alix1c -LBV2_TAG=3047 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=pcengines +COREBOOT_BOARD=alix1c +CBV2_CONFIG=Config.lb +CBV2_TDIR=alix1c +CBV2_TAG=3047 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel.orig/config/platforms/db800.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/db800.conf 2008-01-17 16:37:18.000000000 -0700 @@ -14,7 +14,7 @@ # Use the same settings as the Norwich platform KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) # Use the same settings as the Norwich platform @@ -26,14 +26,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LINUXBIOS_BOARD=db800 -LBV2_CONFIG=Config.lb -LBV2_TDIR=db800 -LBV2_TAG=2810 -LINUXBIOS_ROM_NAME=db800.rom +COREBOOT_VENDOR=amd +COREBOOT_BOARD=db800 +CBV2_CONFIG=Config.lb +CBV2_TDIR=db800 +CBV2_TAG=2810 +COREBOOT_ROM_NAME=db800.rom # FILO configuration # Use a new FILO config for the DB800 to autoload an image Index: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel.orig/config/platforms/dbe61.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/dbe61.conf 2008-01-17 16:37:18.000000000 -0700 @@ -14,7 +14,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) @@ -25,14 +25,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=artecgroup -LINUXBIOS_BOARD=dbe61 -LBV2_CONFIG=Config.lb -LBV2_TDIR=dbe61 -LBV2_TAG=2728 -LINUXBIOS_ROM_NAME=dbe61.rom +COREBOOT_VENDOR=artecgroup +COREBOOT_BOARD=dbe61 +CBV2_CONFIG=Config.lb +CBV2_TDIR=dbe61 +CBV2_TAG=2728 +COREBOOT_ROM_NAME=dbe61.rom # FILO configuration Index: buildrom-devel/config/platforms/ga-2761gxdk.conf =================================================================== --- buildrom-devel.orig/config/platforms/ga-2761gxdk.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-01-17 16:37:18.000000000 -0700 @@ -18,7 +18,7 @@ # Disable for now - I don't know the right kernel for this platform #KERNEL_MK=$(PACKAGE_DIR)/kernel/ -LBV2_MK=$(PACKAGE_DIR)/linuxbios/ga-2761gxdk-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/ga-2761gxdk.mk # kernel configuration (for LAB) @@ -30,14 +30,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=gigabyte -LINUXBIOS_BOARD=ga_2761gxdk -LBV2_CONFIG=Config.lb -LBV2_TDIR=ga_2761gxdk -LBV2_TAG=2908 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=gigabyte +COREBOOT_BOARD=ga_2761gxdk +CBV2_CONFIG=Config.lb +CBV2_TDIR=ga_2761gxdk +CBV2_TAG=2908 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/m57sli.conf =================================================================== --- buildrom-devel.orig/config/platforms/m57sli.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/m57sli.conf 2008-01-17 16:37:18.000000000 -0700 @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/m57sli-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/m57sli-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/m57sli.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=gigabyte -LINUXBIOS_BOARD=m57sli -LBV2_CONFIG=Config.lb -LBV2_TDIR=m57sli -LBV2_TAG=2958 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=gigabyte +COREBOOT_BOARD=m57sli +CBV2_CONFIG=Config.lb +CBV2_TDIR=m57sli +CBV2_TAG=2958 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel.orig/config/platforms/msm800sev.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/msm800sev.conf 2008-01-17 16:37:18.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/msm800sev-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk # kernel configuration (for LAB) @@ -24,14 +24,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=digitallogic -LINUXBIOS_BOARD=msm800sev -LBV2_CONFIG=Config.lb -LBV2_TDIR=msm800sev -LBV2_TAG=3047 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=digitallogic +COREBOOT_BOARD=msm800sev +CBV2_CONFIG=Config.lb +CBV2_TDIR=msm800sev +CBV2_TAG=3047 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel.orig/config/platforms/norwich.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/norwich.conf 2008-01-17 16:37:18.000000000 -0700 @@ -13,7 +13,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk # kernel configuration (for LAB) @@ -24,14 +24,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LINUXBIOS_BOARD=norwich -LBV2_CONFIG=Config.lb -LBV2_TDIR=norwich -LBV2_TAG=2810 -LINUXBIOS_ROM_NAME=norwich.rom +COREBOOT_VENDOR=amd +COREBOOT_BOARD=norwich +CBV2_CONFIG=Config.lb +CBV2_TDIR=norwich +CBV2_TAG=2810 +COREBOOT_ROM_NAME=norwich.rom # FILO configuration Index: buildrom-devel/config/platforms/platforms.conf =================================================================== --- buildrom-devel.orig/config/platforms/platforms.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/platforms.conf 2008-01-17 16:37:18.000000000 -0700 @@ -1,7 +1,7 @@ # This will include the correct configuration for the # selected platform -LBV2_MK=$(PACKAGE_DIR)/linuxbios/generic-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/generic.mk ##Include the correct platform configuration Index: buildrom-devel/config/platforms/qemu.conf =================================================================== --- buildrom-devel.orig/config/platforms/qemu.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/qemu.conf 2008-01-17 16:37:18.000000000 -0700 @@ -12,7 +12,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/qemu-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/qemu.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/qemu.mk # kernel configuration (for LAB) @@ -23,19 +23,19 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOSv2 configuration -LBV2_TAG=2950 -LBV2_CONFIG=Config.lb -LINUXBIOS_ROM_NAME=qemu.rom - -# LinuxBIOS v3 configuration -LBV3_CONFIG=qemu-i386-defconfig -LBV3_TAG=HEAD -LBV3_ROM_NAME=linuxbios.rom - -LINUXBIOS_VENDOR=emulation -LINUXBIOS_BOARD=qemu-i386 -LBV2_TDIR=qemu-i386 +# corebootv2 configuration +CBV2_TAG=2950 +CBV2_CONFIG=Config.lb +COREBOOT_ROM_NAME=qemu.rom + +# coreboot v3 configuration +CBV3_CONFIG=qemu-i386-defconfig +CBV3_TAG=HEAD +CBV3_ROM_NAME=linuxbios.rom + +COREBOOT_VENDOR=emulation +COREBOOT_BOARD=qemu-i386 +CBV2_TDIR=qemu-i386 # FILO configuration Index: buildrom-devel/config/platforms/serengeti_cheetah.conf =================================================================== --- buildrom-devel.orig/config/platforms/serengeti_cheetah.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-01-17 16:37:18.000000000 -0700 @@ -18,7 +18,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/serengeti_cheetah-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/serengeti_cheetah.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/serengeti_cheetah.mk # kernel configuration (for LAB) @@ -40,22 +40,22 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=amd -LBV2_CONFIG=Config.lb +COREBOOT_VENDOR=amd +CBV2_CONFIG=Config.lb ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y) -LINUXBIOS_BOARD=serengeti_cheetah_fam10 -LBV2_TDIR=serengeti_cheetah_fam10 -LBV2_TAG=3018 -LINUXBIOS_ROM_NAME=amd-cheetah-fam10.rom +COREBOOT_BOARD=serengeti_cheetah_fam10 +CBV2_TDIR=serengeti_cheetah_fam10 +CBV2_TAG=3018 +COREBOOT_ROM_NAME=amd-cheetah-fam10.rom else -LINUXBIOS_BOARD=serengeti_cheetah -LBV2_CONFIG=Config.lb -LBV2_TDIR=serengeti_cheetah -LBV2_TAG=2950 -LINUXBIOS_ROM_NAME=serengeti_cheetah.rom +COREBOOT_BOARD=serengeti_cheetah +CBV2_CONFIG=Config.lb +CBV2_TDIR=serengeti_cheetah +CBV2_TAG=2950 +COREBOOT_ROM_NAME=serengeti_cheetah.rom endif # FILO configuration Index: buildrom-devel/config/platforms/supermicro-h8dmr.conf =================================================================== --- buildrom-devel.orig/config/platforms/supermicro-h8dmr.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-01-17 16:37:18.000000000 -0700 @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/supermicro-h8dmr-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/supermicro-h8dmr-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/supermicro-h8dmr.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=supermicro -LINUXBIOS_BOARD=h8dmr -LBV2_CONFIG=Config.lb -LBV2_TDIR=h8dmr -LBV2_TAG=2996 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=supermicro +COREBOOT_BOARD=h8dmr +CBV2_CONFIG=Config.lb +CBV2_TDIR=h8dmr +CBV2_TAG=2996 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/tyan-s2882.conf =================================================================== --- buildrom-devel.orig/config/platforms/tyan-s2882.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/tyan-s2882.conf 2008-01-17 16:37:18.000000000 -0700 @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2882-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2882-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2882.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=tyan -LINUXBIOS_BOARD=s2882 -LBV2_CONFIG=Config.lb -LBV2_TDIR=s2882 -LBV2_TAG=2887 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=tyan +COREBOOT_BOARD=s2882 +CBV2_CONFIG=Config.lb +CBV2_TDIR=s2882 +CBV2_TAG=2887 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/config/platforms/tyan-s2891.conf =================================================================== --- buildrom-devel.orig/config/platforms/tyan-s2891.conf 2008-01-17 16:33:06.000000000 -0700 +++ buildrom-devel/config/platforms/tyan-s2891.conf 2008-01-17 16:37:18.000000000 -0700 @@ -17,7 +17,7 @@ # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2891-kernel.mk -LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2891-linuxbios.mk +CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2891.mk # kernel configuration (for LAB) @@ -34,14 +34,14 @@ # Etherboot configuration ETHERBOOT_ARCH=i386 -# LinuxBIOS configuration +# coreboot configuration -LINUXBIOS_VENDOR=tyan -LINUXBIOS_BOARD=s2891 -LBV2_CONFIG=Config.lb -LBV2_TDIR=s2891 -LBV2_TAG=2792 -LINUXBIOS_ROM_NAME=linuxbios.rom +COREBOOT_VENDOR=tyan +COREBOOT_BOARD=s2891 +CBV2_CONFIG=Config.lb +CBV2_TDIR=s2891 +CBV2_TAG=2792 +COREBOOT_ROM_NAME=linuxbios.rom # FILO configuration Index: buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/alix1c-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk 2008-01-17 16:34:39.000000000 -0700 @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-17 16:34:47.000000000 -0700 @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES=$(PACKAGE_DIR)/linuxbios/patches/2761gxdk-fix-target.patch +CBV2_PATCHES=$(PACKAGE_DIR)/coreboot-v2/patches/2761gxdk-fix-target.patch -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc # This matches the base name of the ROM on -# http://www.linuxbios.org/data/optionroms/ +# http://www.coreboot.org/data/optionroms/ OPTIONROM_ID = pci1039,6330 -include $(PACKAGE_DIR)/linuxbios/optionroms.inc +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/generic-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/generic-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2008-01-17 16:34:52.000000000 -0700 @@ -1,42 +1,42 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom # This is the list of components that comprise the ROM (excluding the payload) -LBV2_COMPONENTS = $(LBV2_OUTPUT) +CBV2_COMPONENTS = $(CBV2_OUTPUT) -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc # If an optionrom was specified in the configuration, then use it ifneq ($(OPTIONROM_ID),) -include $(PACKAGE_DIR)/linuxbios/optionroms.inc +include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc -# Add it to the front of the list so it is prepended to the LinuxBIOS output -LBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_COMPONENTS) +# Add it to the front of the list so it is prepended to the coreboot output +CBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_COMPONENTS) endif -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_COMPONENTS) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_COMPONENTS) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_COMPONENTS) > $@ + @ cat $(CBV2_COMPONENTS) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/linuxbios.inc =================================================================== --- buildrom-devel.orig/packages/linuxbios/linuxbios.inc 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/linuxbios.inc 2008-01-17 16:34:57.000000000 -0700 @@ -1,100 +1,100 @@ # This is the common code included by all the targets ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LINUXBIOS_VENDOR),) -$(error No LinuxBIOS vendor specified) +ifeq ($(COREBOOT_VENDOR),) +$(error No coreboot vendor specified) endif -ifeq ($(LINUXBIOS_BOARD),) -$(error No LinuxBIOS board specified) +ifeq ($(COREBOOT_BOARD),) +$(error No coreboot board specified) endif -ifeq ($(LBV2_CONFIG),) -$(error No LinuxBIOS config specified) +ifeq ($(CBV2_CONFIG),) +$(error No coreboot config specified) endif -ifeq ($(LBV2_TDIR),) -$(error No LinuxBIOS TDIR specified) +ifeq ($(CBV2_TDIR),) +$(error No coreboot TDIR specified) endif endif -LBV2_OUTPUT=$(LBV2_BUILD_DIR)/$(LINUXBIOS_ROM_NAME) -LBV2_DIR=$(BUILD_DIR)/linuxbios +CBV2_OUTPUT=$(CBV2_BUILD_DIR)/$(COREBOOT_ROM_NAME) +CBV2_DIR=$(BUILD_DIR)/coreboot # If the user wanted to override the build directory - obey that now -ifeq ($(CONFIG_LB_USE_BUILD),y) -LBV2_SRC_DIR=$(subst ",,$(CONFIG_LB_BUILDDIR)) +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_SRC_DIR=$(subst ",,$(CONFIG_CB_BUILDDIR)) else -LBV2_SRC_DIR=$(LBV2_DIR)/$(LBV2_BASE_DIR) +CBV2_SRC_DIR=$(CBV2_DIR)/$(CBV2_BASE_DIR) endif -LBV2_TARGET_DIR=$(LBV2_SRC_DIR)/targets/ -LBV2_TARGET_NAME=$(LINUXBIOS_VENDOR)/$(LINUXBIOS_BOARD) -LBV2_CONFIG_NAME=$(LBV2_TARGET_NAME)/$(LBV2_CONFIG) +CBV2_TARGET_DIR=$(CBV2_SRC_DIR)/targets/ +CBV2_TARGET_NAME=$(COREBOOT_VENDOR)/$(COREBOOT_BOARD) +CBV2_CONFIG_NAME=$(CBV2_TARGET_NAME)/$(CBV2_CONFIG) -LBV2_BUILD_DIR=$(LBV2_TARGET_DIR)/$(LBV2_TARGET_NAME)/$(LBV2_TDIR) +CBV2_BUILD_DIR=$(CBV2_TARGET_DIR)/$(CBV2_TARGET_NAME)/$(CBV2_TDIR) -LBV2_STAMP_DIR=$(LBV2_DIR)/stamps -LBV2_LOG_DIR=$(LBV2_DIR)/logs +CBV2_STAMP_DIR=$(CBV2_DIR)/stamps +CBV2_LOG_DIR=$(CBV2_DIR)/logs ifeq ($(CONFIG_VERBOSE),y) -LBV2_FETCH_LOG=/dev/stdout -LBV2_CONFIG_LOG=/dev/stdout -LBV2_BUILD_LOG=/dev/stdout -LBV2_INSTALL_LOG=/dev/stdout +CBV2_FETCH_LOG=/dev/stdout +CBV2_CONFIG_LOG=/dev/stdout +CBV2_BUILD_LOG=/dev/stdout +CBV2_INSTALL_LOG=/dev/stdout else -LBV2_FETCH_LOG=$(LBV2_LOG_DIR)/fetch.log -LBV2_BUILD_LOG=$(LBV2_LOG_DIR)/build.log -LBV2_CONFIG_LOG=$(LBV2_LOG_DIR)/config.log -LBV2_INSTALL_LOG=$(LBV2_LOG_DIR)/install.log +CBV2_FETCH_LOG=$(CBV2_LOG_DIR)/fetch.log +CBV2_BUILD_LOG=$(CBV2_LOG_DIR)/build.log +CBV2_CONFIG_LOG=$(CBV2_LOG_DIR)/config.log +CBV2_INSTALL_LOG=$(CBV2_LOG_DIR)/install.log endif # This allows us to skip the unpack/patch/configure stage -ifeq ($(CONFIG_LB_USE_BUILD),y) -LBV2_DIR_TARGET= +ifeq ($(CONFIG_CB_USE_BUILD),y) +CBV2_DIR_TARGET= else -LBV2_DIR_TARGET=$(LBV2_STAMP_DIR)/.configured +CBV2_DIR_TARGET=$(CBV2_STAMP_DIR)/.configured endif -$(LBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) +$(CBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET) @ cp $< $@ -$(LBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV2_TARBALL) - @ echo "Unpacking LinuxBIOS..." - @ tar -C $(LBV2_DIR) -zxf $(SOURCE_DIR)/$(LBV2_TARBALL) +$(CBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV2_TARBALL) + @ echo "Unpacking coreboot..." + @ tar -C $(CBV2_DIR) -zxf $(SOURCE_DIR)/$(CBV2_TARBALL) @ touch $@ -$(LBV2_STAMP_DIR)/.patched: $(LBV2_STAMP_DIR)/.unpacked - @ echo "Patching LinuxBIOS..." - @ $(BIN_DIR)/doquilt.sh $(LBV2_SRC_DIR) $(LBV2_PATCHES) +$(CBV2_STAMP_DIR)/.patched: $(CBV2_STAMP_DIR)/.unpacked + @ echo "Patching coreboot..." + @ $(BIN_DIR)/doquilt.sh $(CBV2_SRC_DIR) $(CBV2_PATCHES) @ touch $@ -$(LBV2_STAMP_DIR)/.configured: $(LBV2_STAMP_DIR)/.patched +$(CBV2_STAMP_DIR)/.configured: $(CBV2_STAMP_DIR)/.patched @ echo "Building target..." - @( cd $(LBV2_TARGET_DIR); \ - ./buildtarget $(LBV2_CONFIG_NAME) > $(LBV2_CONFIG_LOG) 2>&1) + @( cd $(CBV2_TARGET_DIR); \ + ./buildtarget $(CBV2_CONFIG_NAME) > $(CBV2_CONFIG_LOG) 2>&1) @ touch $@ -$(LBV2_STAMP_DIR) $(LBV2_LOG_DIR): +$(CBV2_STAMP_DIR) $(CBV2_LOG_DIR): @ mkdir -p $@ -$(LBV2_OUTPUT): $(LBV2_STAMP_DIR) $(LBV2_LOG_DIR) $(LBV2_DIR_TARGET) $(LBV2_PAYLOAD_TARGET) - @ echo "Building linuxbios..." +$(CBV2_OUTPUT): $(CBV2_STAMP_DIR) $(CBV2_LOG_DIR) $(CBV2_DIR_TARGET) $(CBV2_PAYLOAD_TARGET) + @ echo "Building coreboot..." @ (export CPU_OPT="$(STACKPROTECT)"; \ - make -C $(LBV2_BUILD_DIR) > $(LBV2_BUILD_LOG) 2>&1) + make -C $(CBV2_BUILD_DIR) > $(CBV2_BUILD_LOG) 2>&1) -generic-linuxbios-clean: - @ echo "Cleaning linuxbios..." - @ rm -f $(LBV2_PAYLOAD_TARGET) - @ if [ -d $(LBV2_BUILD_DIR) ];then \ - $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \ +generic-coreboot-clean: + @ echo "Cleaning coreboot..." + @ rm -f $(CBV2_PAYLOAD_TARGET) + @ if [ -d $(CBV2_BUILD_DIR) ];then \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ fi - @ rm -f $(LBV2_OUTPUT) + @ rm -f $(CBV2_OUTPUT) -generic-linuxbios-distclean: - @ if [ "$(CONFIG_LB_USE_BUILD)" = "y" ]; then \ - echo "Cleaning linuxbios build..."; \ - $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \ - rm -f $(LBV2_OUTPUT); \ +generic-coreboot-distclean: + @ if [ "$(CONFIG_CB_USE_BUILD)" = "y" ]; then \ + echo "Cleaning coreboot build..."; \ + $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \ + rm -f $(CBV2_OUTPUT); \ fi - @ rm -rf $(LBV2_DIR)/* + @ rm -rf $(CBV2_DIR)/* Index: buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/m57sli-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk 2008-01-17 16:35:05.000000000 -0700 @@ -1,49 +1,49 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES= +CBV2_PATCHES= ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-17 16:35:14.000000000 -0700 @@ -1,38 +1,38 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/norwich-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-17 16:35:22.000000000 -0700 @@ -1,40 +1,40 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) else -$(warning You specified $(LBV2_TAG) a version to pull in your platform config) +$(warning You specified $(CBV2_TAG) a version to pull in your platform config) endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/ -LBV2_VSA=lx_vsa.36k.bin -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_VSA=lx_vsa.36k.bin +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_VSA): +$(SOURCE_DIR)/$(CBV2_VSA): @ echo "Fetching the VSA code..." - wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@ + wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@ -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS rev $(LBV2_TAG) code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot rev $(CBV2_TAG) code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 # Special rule - append the VSA -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA) @ mkdir -p $(OUTPUT_DIR) - @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@ + @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/optionroms.inc =================================================================== --- buildrom-devel.orig/packages/linuxbios/optionroms.inc 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/optionroms.inc 2008-01-17 16:35:27.000000000 -0700 @@ -1,7 +1,7 @@ -# Rules to download option roms from the LinuxBIOS option rom +# Rules to download option roms from the coreboot option rom # repository -OPTIONROMURL=http://www.linuxbios.org/data/optionroms/ +OPTIONROMURL=http://www.coreboot.org/data/optionroms/ $(OUTPUT_DIR)/$(OPTIONROM_ID).license: @ mkdir -p $(OUTPUT_DIR) Index: buildrom-devel/packages/linuxbios/qemu.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/qemu.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/qemu.mk 2008-01-17 16:35:34.000000000 -0700 @@ -1,40 +1,40 @@ -# This is the QEMU LinuxBIOS target +# This is the QEMU coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = -LBV2_BASE_DIR=svn -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf +CBV2_BASE_DIR=svn +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf ifeq ($(CONFIG_PAYLOAD_LAB),y) -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-lab.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-lab.patch else -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-payload.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-payload.patch endif -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_SVN_DIR=$(SOURCE_DIR)/linuxbios - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(LBV2_SVN_DIR) \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_SVN_DIR=$(SOURCE_DIR)/coreboot + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(CBV2_SVN_DIR) \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) @ cp $< $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/serengeti_cheetah.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/serengeti_cheetah.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/serengeti_cheetah.mk 2008-01-17 16:35:37.000000000 -0700 @@ -1,58 +1,58 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = # Make sure we have the tools we need to accomplish this HAVE_IASL:=$(call find-tool,iasl) ifeq ($(HAVE_IASL),n) -$(error To build LinuxBIOS, you need to install the 'iasl' tool) +$(error To build coreboot, you need to install the 'iasl' tool) endif ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y) ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah_fam10-lab.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah_fam10-lab.patch endif endif ifeq ($(CONFIG_PLATFORM_SERENGETI_CHEETAH),y) ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-lab.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-lab.patch else - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-payload.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-payload.patch endif ifeq ($(CONFIG_SIMNOW),y) -LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/simnow.patch +CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/simnow.patch endif endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) @ cp $< $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-17 16:35:42.000000000 -0700 @@ -1,49 +1,49 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-17 16:35:51.000000000 -0700 @@ -1,45 +1,45 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-filo-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-filo-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk =================================================================== --- buildrom-devel.orig/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-17 16:33:09.000000000 -0700 +++ buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-17 16:36:01.000000000 -0700 @@ -1,45 +1,45 @@ -# This is the Generic LinuxBIOS target +# This is the Generic coreboot target ifeq ($(CONFIG_PLATFORM),y) -ifeq ($(LBV2_TAG),) +ifeq ($(CBV2_TAG),) $(error You need to specify a version to pull in your platform config) endif endif -LBV2_PATCHES = +CBV2_PATCHES = ifeq ($(CONFIG_PAYLOAD_FILO),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-filo-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-filo-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_KERNEL),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch endif ifeq ($(CONFIG_PAYLOAD_LAB),y) - LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch + CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch endif -LBV2_BASE_DIR=svn -LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 -LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz -LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom - -include $(PACKAGE_DIR)/linuxbios/linuxbios.inc - -$(SOURCE_DIR)/$(LBV2_TARBALL): - @ echo "Fetching the LinuxBIOS code..." - @ mkdir -p $(SOURCE_DIR)/linuxbios - @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \ - $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \ - > $(LBV2_FETCH_LOG) 2>&1 +CBV2_BASE_DIR=svn +CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2 +CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz +CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom + +include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc + +$(SOURCE_DIR)/$(CBV2_TARBALL): + @ echo "Fetching the coreboot code..." + @ mkdir -p $(SOURCE_DIR)/coreboot + @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \ + $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \ + > $(CBV2_FETCH_LOG) 2>&1 -$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) +$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) @ mkdir -p $(OUTPUT_DIR) - @ cat $(LBV2_OUTPUT) > $@ + @ cat $(CBV2_OUTPUT) > $@ -linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) -linuxbios-clean: generic-linuxbios-clean -linuxbios-distclean: generic-linuxbios-distclean +coreboot: $(OUTPUT_DIR)/$(TARGET_ROM) +coreboot-clean: generic-coreboot-clean +coreboot-distclean: generic-coreboot-distclean Index: buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk =================================================================== --- buildrom-devel.orig/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-17 16:33:08.000000000 -0700 +++ buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-17 16:36:41.000000000 -0700 @@ -1,76 +1,76 @@ -ifeq ($(LBV3_TAG),) +ifeq ($(CBV3_TAG),) $(error You need to specify a version to pull in your platform config) endif -LBV3_URL=svn://openbios.org/repository/LinuxBIOSv3 -LBV3_TARBALL=linuxbios-svn-$(LBV3_TAG).tar.gz -LBV3_DIR=$(BUILD_DIR)/linuxbiosv3 -LBV3_SRC_DIR=$(LBV3_DIR)/svn +CBV3_URL=svn://coreboot.org/repository/coreboot-v3 +CBV3_TARBALL=coreboot-svn-$(CBV3_TAG).tar.gz +CBV3_DIR=$(BUILD_DIR)/coreboot-v3 +CBV3_SRC_DIR=$(CBV3_DIR)/svn -LBV3_STAMP_DIR=$(LBV3_DIR)/stamps -LBV3_LOG_DIR=$(LBV3_DIR)/logs +CBV3_STAMP_DIR=$(CBV3_DIR)/stamps +CBV3_LOG_DIR=$(CBV3_DIR)/logs ifeq ($(CONFIG_VERBOSE),y) -LBV3_FETCH_LOG=/dev/stdout -LBV3_CONFIG_LOG=/dev/stdout -LBV3_BUILD_LOG=/dev/stdout +CBV3_FETCH_LOG=/dev/stdout +CBV3_CONFIG_LOG=/dev/stdout +CBV3_BUILD_LOG=/dev/stdout else -LBV3_FETCH_LOG=$(LBV3_LOG_DIR)/fetch.log -LBV3_CONFIG_LOG=$(LBV3_LOG_DIR)/config.log -LBV3_BUILD_LOG=$(LBV3_LOG_DIR)/build.log +CBV3_FETCH_LOG=$(CBV3_LOG_DIR)/fetch.log +CBV3_CONFIG_LOG=$(CBV3_LOG_DIR)/config.log +CBV3_BUILD_LOG=$(CBV3_LOG_DIR)/build.log endif -TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom +TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom -LBV3_OUTPUT=$(LBV3_SRC_DIR)/build/linuxbios.rom +CBV3_OUTPUT=$(CBV3_SRC_DIR)/build/coreboot.rom -LBV3_PATCHES ?= +CBV3_PATCHES ?= -$(SOURCE_DIR)/$(LBV3_TARBALL): - @ mkdir -p $(SOURCE_DIR)/linuxbiosv3 - @ $(BIN_DIR)/fetchsvn.sh $(LBV3_URL) \ - $(SOURCE_DIR)/linuxbiosv3 $(LBV3_TAG) \ - $@ > $(LBV3_FETCH_LOG) 2>&1 - -$(LBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV3_TARBALL) - @echo "Unpacking LinuxBIOSv3..." - @ mkdir -p $(LBV3_DIR) - @ tar -C $(LBV3_DIR) -zxf $(SOURCE_DIR)/$(LBV3_TARBALL) +$(SOURCE_DIR)/$(CBV3_TARBALL): + @ mkdir -p $(SOURCE_DIR)/coreboot-v3 + @ $(BIN_DIR)/fetchsvn.sh $(CBV3_URL) \ + $(SOURCE_DIR)/coreboot-v3 $(CBV3_TAG) \ + $@ > $(CBV3_FETCH_LOG) 2>&1 + +$(CBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV3_TARBALL) + @echo "Unpacking coreboot-v3..." + @ mkdir -p $(CBV3_DIR) + @ tar -C $(CBV3_DIR) -zxf $(SOURCE_DIR)/$(CBV3_TARBALL) @ touch $@ -$(LBV3_STAMP_DIR)/.patched: $(LBV3_STAMP_DIR)/.unpacked - @ echo "Patching LinuxBIOSv3..." - @ $(BIN_DIR)/doquilt.sh $(LBV3_SRC_DIR) $(LBV3_PATCHES) +$(CBV3_STAMP_DIR)/.patched: $(CBV3_STAMP_DIR)/.unpacked + @ echo "Patching coreboot-v3..." + @ $(BIN_DIR)/doquilt.sh $(CBV3_SRC_DIR) $(CBV3_PATCHES) @ touch $@ -$(LBV3_STAMP_DIR)/.configured: $(LBV3_STAMP_DIR)/.patched - @ echo "Configuring LinuxBIOSv3..." - @ cp $(PACKAGE_DIR)/linuxbiosv3/conf/$(LBV3_CONFIG) $(LBV3_SRC_DIR)/.config - @ make -C $(LBV3_SRC_DIR) oldconfig > $(LBV3_CONFIG_LOG) 2>&1 +$(CBV3_STAMP_DIR)/.configured: $(CBV3_STAMP_DIR)/.patched + @ echo "Configuring coreboot-v3..." + @ cp $(PACKAGE_DIR)/coreboot-v3/conf/$(CBV3_CONFIG) $(CBV3_SRC_DIR)/.config + @ make -C $(CBV3_SRC_DIR) oldconfig > $(CBV3_CONFIG_LOG) 2>&1 @ touch $@ -$(LBV3_OUTPUT): $(LBV3_STAMP_DIR)/.configured - @ echo "Building LinuxBIOSv3..." - @ $(MAKE) -C $(LBV3_SRC_DIR) > $(LBV3_BUILD_LOG) 2>&1 +$(CBV3_OUTPUT): $(CBV3_STAMP_DIR)/.configured + @ echo "Building coreboot-v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) > $(CBV3_BUILD_LOG) 2>&1 -$(LBV3_SRC_DIR)/build/util/lar/lar: $(LBV3_STAMP_DIR)/.configured - @ $(MAKE) -C $(LBV3_SRC_DIR)/util lar > $(LBV3_BUILD_LOG) 2>&1 +$(CBV3_SRC_DIR)/build/util/lar/lar: $(CBV3_STAMP_DIR)/.configured + @ $(MAKE) -C $(CBV3_SRC_DIR)/util lar > $(CBV3_BUILD_LOG) 2>&1 -$(STAGING_DIR)/bin/lar: $(LBV3_SRC_DIR)/build/util/lar/lar +$(STAGING_DIR)/bin/lar: $(CBV3_SRC_DIR)/build/util/lar/lar @ mkdir -p $(STAGING_DIR)/bin @ cp $< $@ -$(LBV3_STAMP_DIR) $(LBV3_LOG_DIR): +$(CBV3_STAMP_DIR) $(CBV3_LOG_DIR): @ mkdir -p $@ -linuxbiosv3: $(LBV3_LOG_DIR) $(LBV3_STAMP_DIR) $(LBV3_OUTPUT) $(STAGING_DIR)/bin/lar +coreboot-v3: $(CBV3_LOG_DIR) $(CBV3_STAMP_DIR) $(CBV3_OUTPUT) $(STAGING_DIR)/bin/lar -linuxbiosv3-clean: - @ echo "Cleaning linuxbiosv3..." - @ $(MAKE) -C $(LBV3_SRC_DIR) clean > /dev/null 2>&1 +coreboot-v3-clean: + @ echo "Cleaning coreboot-v3..." + @ $(MAKE) -C $(CBV3_SRC_DIR) clean > /dev/null 2>&1 -linuxbiosv3-distclean: - @ rm -rf $(LBV3_DIR)/* +coreboot-v3-distclean: + @ rm -rf $(CBV3_DIR)/* @ rm -rf $(STAGING_DIR)/bin/lar Index: buildrom-devel/scripts/defconfig =================================================================== --- buildrom-devel.orig/scripts/defconfig 2008-01-17 16:33:07.000000000 -0700 +++ buildrom-devel/scripts/defconfig 2008-01-17 16:34:10.000000000 -0700 @@ -8,11 +8,11 @@ # CONFIG_ADVANCED is not set # -# LinuxBIOS configuration +# coreboot configuration # CONFIG_USE_LZMA=y -# CONFIG_LB_USE_BUILD is not set -CONFIG_LB_BUILDDIR="" +# CONFIG_CB_USE_BUILD is not set +CONFIG_CB_BUILDDIR="" CONFIG_PLATFORM=y CONFIG_PAYLOAD=y

4 5

Re: [coreboot] r3053 - in trunk/coreboot-v2: . documentation documentation/RFC src/arch/i386 src/arch/i386/boot src/arch/i386/include/arch src/arch/i386/init src/arch/i386/lib src/arch/ppc src/arch/ppc/boot src/arch/ppc/init src/boot src/config src/console src/cpu/amd/car src/cpu/amd/model_gx2 src/cpu/amd/model_lx src/cpu/amd/sc520 src/cpu/emulation/qemu-i386 src/cpu/ppc/mpc74xx src/cpu/ppc/ppc4xx src/cpu/ppc/ppc7xx src/cpu/x86/32bit src/cpu/x86/car src/cpu/x86/lapic src/cpu/x86/pae src/devices/emulator/x86
by Peter Stuge 18 Jan '08

18 Jan '08

On Fri, Jan 18, 2008 at 04:08:58PM +0100, svn(a)coreboot.org wrote: > - See http://snapshots.linuxbios.org/ > + See http://tracker.coreboot.org/ snapshots in the tracker? > -unsigned long write_linuxbios_table( > +unsigned long write_coreboot_table( Really? > - /* Create cmos checksum entry in linuxbios table */ > + /* Create cmos checksum entry in coreboot table */ > lb_cmos_checksum(head); Inconsistent since the function name doesn't change. > struct lb_memory *get_lb_mem(void); Likewise.. > -// Ported from Etherboot to LinuxBIOS 2005-08 by Steve Magnani > +// Ported from Etherboot to coreboot 2005-08 by Steve Magnani It wasn't called coreboot back then. > - { LB_TAG_ASSEMBLER, linuxbios_assembler, }, > + { LB_TAG_ASSEMBLER, coreboot_assembler, }, LB_ .. And probably many more. I stopped here. I am with Carl-Daniel. I think we should consider reverting some hunks of this patch. //Peter

2 1

← Newer
1
...
15
16
17
18
19
20
21
...
35
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot January 2008