coreboot June 2007

coreboot@coreboot.org

76 participants
285 discussions

[LinuxBIOS] r357 - in LinuxBIOSv3/util: . lar
by svn＠openbios.org 16 Jun '07

16 Jun '07

Author: stepan Date: 2007-06-16 19:07:24 +0200 (Sat, 16 Jun 2007) New Revision: 357 Modified: LinuxBIOSv3/util/Makefile LinuxBIOSv3/util/lar/Makefile Log: in order to integrate compression into lar, it needs some makefile splits to keep the c++ compiler happy (lzma is c++ code and thus must be linked by a c++ compiler). The Makefiles are changed so lar is build with HOSTCC but linked with HOSTCXX (so the c++ library is picked up) Signed-off-by: PatrickGeorgi <patrick(a)georgi-clan.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: LinuxBIOSv3/util/Makefile =================================================================== --- LinuxBIOSv3/util/Makefile 2007-06-16 14:37:02 UTC (rev 356) +++ LinuxBIOSv3/util/Makefile 2007-06-16 17:07:24 UTC (rev 357) @@ -19,10 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -# This stuff is always needed. +# main utilities include util/dtc/Makefile include util/kconfig/Makefile -include util/lar/Makefile include util/options/Makefile # Parts used by LinuxBIOS. @@ -32,3 +31,5 @@ include util/lzma/Makefile include util/nrv2b/Makefile +# LinuxBIOS archiver +include util/lar/Makefile Modified: LinuxBIOSv3/util/lar/Makefile =================================================================== --- LinuxBIOSv3/util/lar/Makefile 2007-06-16 14:37:02 UTC (rev 356) +++ LinuxBIOSv3/util/lar/Makefile 2007-06-16 17:07:24 UTC (rev 357) @@ -18,27 +18,35 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA ## -LZMA_OBJ := $(obj)/util/lzma/LZMAEncoder.o $(obj)/util/lzma/LZInWindow.o -LZMA_OBJ += $(obj)/util/lzma/RangeCoderBit.o $(obj)/util/lzma/StreamUtils.o -LZMA_OBJ += $(obj)/util/lzma/OutBuffer.o $(obj)/util/lzma/Alloc.o -LZMA_OBJ += $(obj)/util/lzma/CRC.o +LAROBJ := lar.o create.o extract.o list.o lib.o bootblock.o -SOURCE := lar.c create.c extract.c list.c lib.c bootblock.c +LARDIR := lardir ifeq ($(CONFIG_COMPRESSION_LZMA),y) COMPRESSOR := $(LZMA_OBJ) $(obj)/util/lzma/lzma-compress.o +LARDIR += lzmadir endif ifeq ($(CONFIG_COMPRESSION_NRV2B),y) COMPRESSOR += $(obj)/util/nrv2b/nrv2b-compress.o +LARDIR += nrv2bdir endif -$(obj)/util/lar/lar: $(patsubst %,$(src)/util/lar/%,$(SOURCE)) $(COMPRESSOR) +LAROBJ_ABS := $(patsubst %,$(obj)/util/lar/%,$(LAROBJ)) + +lardir: + $(Q)printf " BUILD LAR\n" $(Q)mkdir -p $(obj)/util/lar + +$(obj)/util/lar/lar: $(CDIR) $(LAROBJ_ABS) $(COMPRESSOR) $(Q)printf " HOSTCXX $(subst $(shell pwd)/,,$(@))\n" - $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $^ + $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $(ABS_OBJ) $(COMPRESSOR) +$(obj)/util/lar/%.o: $(src)/util/lar/%.c + $(Q)printf " HOSTCC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(HOSTCC) $(HOSTCFLAGS) -c $< -o $@ + # ----------------------------------------------------------------------------- # Stuff below this line is for debugging purposes only.

1 0

[LinuxBIOS] r356 - in LinuxBIOSv3/util: lzma nrv2b
by svn＠openbios.org 16 Jun '07

16 Jun '07

Author: stepan Date: 2007-06-16 16:37:02 +0200 (Sat, 16 Jun 2007) New Revision: 356 Modified: LinuxBIOSv3/util/lzma/minilzma.cc LinuxBIOSv3/util/nrv2b/nrv2b.c Log: This patch provides a simple API to nrv2b and lzma. Necessary for integrating compression algorithms into lar. lar -x (extract) will be done using the decompression routines in lib/ to ease debugging (just in case - they _should_ be functionally equivalent to the decompression routines in the compression utilities) Signed-off-by: Patrick Georgi <patrick(a)georgi-clan.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: LinuxBIOSv3/util/lzma/minilzma.cc =================================================================== --- LinuxBIOSv3/util/lzma/minilzma.cc 2007-06-16 14:34:17 UTC (rev 355) +++ LinuxBIOSv3/util/lzma/minilzma.cc 2007-06-16 14:37:02 UTC (rev 356) @@ -234,6 +234,7 @@ return result; } +#ifndef COMPACT int main(int argc, char *argv[]) { char *s; @@ -277,4 +278,16 @@ fclose(outfile); return EXIT_SUCCESS; } +#else +extern "C" { +void do_lzma_compress(char* in, unsigned long in_len, char* out, unsigned long* out_len) { + std::vector<unsigned char> result; + result = LZMACompress(std::vector<unsigned char>(in,in+in_len)); + *out_len = result.size(); + std::memcpy(out, &result[0], *out_len); +} + +} +#endif + Modified: LinuxBIOSv3/util/nrv2b/nrv2b.c =================================================================== --- LinuxBIOSv3/util/nrv2b/nrv2b.c 2007-06-16 14:34:17 UTC (rev 355) +++ LinuxBIOSv3/util/nrv2b/nrv2b.c 2007-06-16 14:37:02 UTC (rev 356) @@ -65,11 +65,13 @@ #define BITSIZE 32 #endif +#ifndef COMPACT static __inline__ void Error(char *message) { Fprintf((stderr, "\n%s\n", message)); exit(EXIT_FAILURE); } +#endif /* These will be a complete waste of time on a lo-endian */ /* system, but it only gets done once so WTF. */ @@ -1213,6 +1215,7 @@ } +#ifndef COMPACT void Encode(void) /* compression */ { uint8_t *in, *out; @@ -1291,9 +1294,18 @@ #endif } +#endif #endif +#ifdef COMPACT +void do_nrv2b_compress(char* in, unsigned long in_len, char* out, unsigned long* out_len) { + *out_len = in_len + (in_len/8) + 256; + out = malloc(*out_len); + ucl_nrv2b_99_compress(in, in_len, out, out_len, 0 ); +} +#endif + #ifdef DECODE #define GETBIT_8(bb, src, ilen) \

1 0

[LinuxBIOS] r355 - in LinuxBIOSv3: arch/x86 lib util/lar util/lzma util/nrv2b
by svn＠openbios.org 16 Jun '07

16 Jun '07

Author: stepan Date: 2007-06-16 16:34:17 +0200 (Sat, 16 Jun 2007) New Revision: 355 Modified: LinuxBIOSv3/arch/x86/Makefile LinuxBIOSv3/lib/Makefile LinuxBIOSv3/util/lar/Makefile LinuxBIOSv3/util/lzma/Makefile LinuxBIOSv3/util/nrv2b/Makefile Log: This patch enables build of both compressors (instead of the current stubs), both as utilities and object files to link with lar (once lar is capable of that). There are some details that could be discussed (eg. I could avoid the duplication of LZMA_OBJ, but that would mean using ::-rules in util/lzma/Makefile with whatever side effects those bring, or by splitting them into a separate file), but I tried it here, and it works. Signed-off-by: Patrick Georgi <patrick(a)georgi-clan.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: LinuxBIOSv3/arch/x86/Makefile =================================================================== --- LinuxBIOSv3/arch/x86/Makefile 2007-06-15 15:33:50 UTC (rev 354) +++ LinuxBIOSv3/arch/x86/Makefile 2007-06-16 14:34:17 UTC (rev 355) @@ -36,7 +36,7 @@ ROM_SIZE := $(shell expr $(CONFIG_LINUXBIOS_ROMSIZE_KB) \* 1024) -$(obj)/linuxbios.rom: $(obj)/linuxbios.bootblock $(obj)/util/lar/lar lzma $(obj)/linuxbios.initram $(obj)/linuxbios.stage2 $(obj)/option_table payload_compress +$(obj)/linuxbios.rom: $(obj)/linuxbios.bootblock $(obj)/util/lar/lar lzma nrv2b $(obj)/linuxbios.initram $(obj)/linuxbios.stage2 $(obj)/option_table $(Q)rm -rf $(obj)/lar.tmp $(Q)mkdir $(obj)/lar.tmp $(Q)mkdir $(obj)/lar.tmp/normal @@ -158,20 +158,6 @@ # -# TODO: Compress the payload (CONFIG_PAYLOAD_FILE) with the default compressor. -# - -payload_compress: -ifeq ($(CONFIG_PAYLOAD_NONE),y) -else -ifeq ($(CONFIG_DEFAULT_COMPRESSION_NONE),y) -else - $(Q)printf " ZIP $(CONFIG_PAYLOAD_FILE) (skipped)\n" -endif -endif - - -# # Build rules. # Modified: LinuxBIOSv3/lib/Makefile =================================================================== --- LinuxBIOSv3/lib/Makefile 2007-06-15 15:33:50 UTC (rev 354) +++ LinuxBIOSv3/lib/Makefile 2007-06-16 14:34:17 UTC (rev 355) @@ -32,11 +32,18 @@ # in a way that they can be put in the lar. # +ifeq ($(CONFIG_COMPRESSION_LZMA),y) +lzma: $(obj)/util/lzma/lzma $(obj)/util/lzma/lzma-compress.o +else lzma: -ifeq ($(CONFIG_DEFAULT_COMPRESSION_LZMA),y) - $(Q)printf " BUILD LZMA (skipped)\n" endif +ifeq ($(CONFIG_COMPRESSION_NRV2B),y) +nrv2b: $(obj)/util/nrv2b/nrv2b $(obj)/util/nrv2b/nrv2b-compress.o +else +nrv2b: +endif + $(obj)/lib/%.o: $(src)/lib/%.c $(Q)mkdir -p $(obj)/lib $(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n" Modified: LinuxBIOSv3/util/lar/Makefile =================================================================== --- LinuxBIOSv3/util/lar/Makefile 2007-06-15 15:33:50 UTC (rev 354) +++ LinuxBIOSv3/util/lar/Makefile 2007-06-16 14:34:17 UTC (rev 355) @@ -18,12 +18,25 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA ## +LZMA_OBJ := $(obj)/util/lzma/LZMAEncoder.o $(obj)/util/lzma/LZInWindow.o +LZMA_OBJ += $(obj)/util/lzma/RangeCoderBit.o $(obj)/util/lzma/StreamUtils.o +LZMA_OBJ += $(obj)/util/lzma/OutBuffer.o $(obj)/util/lzma/Alloc.o +LZMA_OBJ += $(obj)/util/lzma/CRC.o + SOURCE := lar.c create.c extract.c list.c lib.c bootblock.c -$(obj)/util/lar/lar: $(patsubst %,$(src)/util/lar/%,$(SOURCE)) +ifeq ($(CONFIG_COMPRESSION_LZMA),y) +COMPRESSOR := $(LZMA_OBJ) $(obj)/util/lzma/lzma-compress.o +endif + +ifeq ($(CONFIG_COMPRESSION_NRV2B),y) +COMPRESSOR += $(obj)/util/nrv2b/nrv2b-compress.o +endif + +$(obj)/util/lar/lar: $(patsubst %,$(src)/util/lar/%,$(SOURCE)) $(COMPRESSOR) $(Q)mkdir -p $(obj)/util/lar - $(Q)printf " HOSTCC $(subst $(shell pwd)/,,$(@))\n" - $(Q)$(HOSTCC) $(HOSTCFLAGS) -o $@ $^ + $(Q)printf " HOSTCXX $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $^ # ----------------------------------------------------------------------------- Modified: LinuxBIOSv3/util/lzma/Makefile =================================================================== --- LinuxBIOSv3/util/lzma/Makefile 2007-06-15 15:33:50 UTC (rev 354) +++ LinuxBIOSv3/util/lzma/Makefile 2007-06-16 14:34:17 UTC (rev 355) @@ -21,14 +21,16 @@ LZMA_OBJ := $(obj)/util/lzma/LZMAEncoder.o $(obj)/util/lzma/LZInWindow.o LZMA_OBJ += $(obj)/util/lzma/RangeCoderBit.o $(obj)/util/lzma/StreamUtils.o LZMA_OBJ += $(obj)/util/lzma/OutBuffer.o $(obj)/util/lzma/Alloc.o -LZMA_OBJ += $(obj)/util/lzma/CRC.o $(obj)/util/lzma/minilzma.o +LZMA_OBJ += $(obj)/util/lzma/CRC.o -$(obj)/util/lzma/lzma: lzmadir $(LZMA_OBJ) - $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $(LZMA_OBJ) - $(Q)printf "done\n" +$(obj)/util/lzma/lzma: lzmadir $(LZMA_OBJ) $(obj)/util/lzma/minilzma.o + $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $(LZMA_OBJ) $(obj)/util/lzma/minilzma.o +$(obj)/util/lzma/lzma-compress.o: $(src)/util/lzma/minilzma.cc + $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c -DCOMPACT $< + lzmadir: - $(Q)printf "Building LZMA compressor... " + $(Q)printf " BUILD LZMA\n" $(Q)mkdir -p $(obj)/util/lzma/ $(obj)/util/lzma/%.o: $(src)/util/lzma/C/7zip/Compress/LZMA/%.cpp Modified: LinuxBIOSv3/util/nrv2b/Makefile =================================================================== --- LinuxBIOSv3/util/nrv2b/Makefile 2007-06-15 15:33:50 UTC (rev 354) +++ LinuxBIOSv3/util/nrv2b/Makefile 2007-06-16 14:34:17 UTC (rev 355) @@ -21,9 +21,11 @@ $(obj)/util/nrv2b/nrv2b: nrv2bdir $(src)/util/nrv2b/nrv2b.c $(Q)$(HOSTCC) $(HOSTCFLAGS) -DENCODE -DDECODE -DMAIN -DVERBOSE -DNDEBUG -DBITSIZE=32 -DENDIAN=0 -o $@ $(src)/util/nrv2b/nrv2b.c - $(Q)printf "done\n" +$(obj)/util/nrv2b/nrv2b-compress.o: nrv2bdir $(src)/util/nrv2b/nrv2b.c + $(Q)$(HOSTCC) $(HOSTCFLAGS) -DENCODE -DVERBOSE -DCOMPACT -DNDEBUG -DBITSIZE=32 -DENDIAN=0 -c -o $@ $(src)/util/nrv2b/nrv2b.c + nrv2bdir: - $(Q)printf "Building nrv2b compressor... " + $(Q)printf " BUILD NRV2B\n" $(Q)mkdir -p $(obj)/util/nrv2b/

1 0

[LinuxBIOS] get some output on serial console of commel lv671 board, but not readable one
by Dieter Bloms 16 Jun '07

16 Jun '07

Hi, I managed to get some stuff on my serial out, when I switch on my commell lv671 board with i82801 chip and w83627hf superio, but it is not readable. The most of it are ? inverse colour like : ��SSQ��|��Ӌ��E��L��E��i��iT��i��[10;1H��Ϝ��Ϭ��ϼԜ��Ϭ��c߈�w�H�� I use 115200,8N1, which works fine, if I boot into linux with original bios. Has anybody seen those output and know what may be wrong ? -- Gruß Dieter -- I do not get viruses because I do not use MS software. If you use Outlook then please do not put my email address in your address-book so that WHEN you get a virus it won't use my address in the From field.

4 9

[LinuxBIOS] [PATCH] Add Asus MEW-VM, Intel i82810, and generic i82801
by Corey Osgood 16 Jun '07

16 Jun '07

See attached patch. Thanks for all the great comments and suggestions! -Corey

5 12

[LinuxBIOS] [PATCH] v3: Intel 82371EB reworking, QEMU fixing
by Uwe Hermann 15 Jun '07

15 Jun '07

See patch. Comments welcome. Not sure this is already committable, may need some fixes. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

2 2

[LinuxBIOS] Specifications?
by Brendan Trotter 15 Jun '07

15 Jun '07

Hi, I'm wondering if there's a specification describing the state of the computer at the hand-off between LinuxBIOS and a payload. So far I've got LinxBIOS booting a dummy "for(;;)" payload in Bochs, and I've found out there's a "LinuxBIOS Table" and that it can be found by searching for "LBIO" in the first 4 KB of RAM and in the area between 0xF000 and 0xFFFFF. I don't know if there's a checksum or any other validation, and have been unable to find anything describing what this table contains. I assume there may also be ACPI, MP specification, PIRQ routing and/or (possibly) SMI/DMI tables, and I'm guessing that (if present) these tables can be searched for using the same methods as described in their corresponding specifications. There's also other issues, for e.g: - will an 80x86 system always be in 32-bit protected mode for 32-bit ELF payloads, and is long mode possible for ELF64 payloads (and if so, how is paging setup)? - are any parameters passed on the stack to the payload's entry function? - are AP CPUs started (or waiting for a SIPI sequence)? - can the payload assume anything about the state of the PIC, I/O APIC/s and local APIC/s, PIT, RTC, ISA DMA controllers, serial ports, etc? - what state are PCI buses and devices left in (would a payload need to do full PCI bus enumeration, or..)? - is there anything in the LinuxBIOS table that could be used to determine if the computer is "headless" and which serial port or other device to use if it is? - can anything be assumed about AGP and the first video card (if the computer isn't headless)? - is there any form of "LinuxBIOS API" that can be used by the payload for generic low level disk access (floppy/ATA/ATAPI/SCSI)? Thanks, Brendan

10 29

[LinuxBIOS] r354 - in LinuxBIOSv3: include mainboard/amd/norwich southbridge/amd/cs5536
by svn＠openbios.org 15 Jun '07

15 Jun '07

Author: rminnich Date: 2007-06-15 17:33:50 +0200 (Fri, 15 Jun 2007) New Revision: 354 Added: LinuxBIOSv3/include/post_code.h LinuxBIOSv3/mainboard/amd/norwich/initram.c Modified: LinuxBIOSv3/mainboard/amd/norwich/Kconfig LinuxBIOSv3/mainboard/amd/norwich/Makefile LinuxBIOSv3/southbridge/amd/cs5536/cs5536.h Log: OK, this includes all the mods that should give you a compileable initram. Gets errors as we don't have ram support yet, working that now. Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Added: LinuxBIOSv3/include/post_code.h =================================================================== --- LinuxBIOSv3/include/post_code.h (rev 0) +++ LinuxBIOSv3/include/post_code.h 2007-06-15 15:33:50 UTC (rev 354) @@ -0,0 +1,21 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Ronald G. Minnich <rminnich(a)gmail.com> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define POST_START_OF_MAIN (0x01) Modified: LinuxBIOSv3/mainboard/amd/norwich/Kconfig =================================================================== --- LinuxBIOSv3/mainboard/amd/norwich/Kconfig 2007-06-14 20:00:58 UTC (rev 353) +++ LinuxBIOSv3/mainboard/amd/norwich/Kconfig 2007-06-15 15:33:50 UTC (rev 354) @@ -40,3 +40,6 @@ help Mainboard specific PCI subsystem device ID. + + + Modified: LinuxBIOSv3/mainboard/amd/norwich/Makefile =================================================================== --- LinuxBIOSv3/mainboard/amd/norwich/Makefile 2007-06-14 20:00:58 UTC (rev 353) +++ LinuxBIOSv3/mainboard/amd/norwich/Makefile 2007-06-15 15:33:50 UTC (rev 354) @@ -19,31 +19,24 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -# -# VPD or SIP ROM or ... how does NVIDIA call it? -# Some space to cope with dirty southbridge tricks. -# Do we want to put our own stuff there, too? -# - $(obj)/linuxbios.vpd: $(Q)printf " BUILD DUMMY VPD\n" $(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT) -# -# This is going to be the init RAM code. -# -# The initram file is always uncompressed. It belongs into the mainboard -# directory and is built from what was auto.c in v2. -# -# It should probably be renamed, as it does more than initram. -# auto.c is a bit too meaningless though. -# - -$(obj)/linuxbios.initram: $(obj)/stage0.init $(obj)/stage0.o $(obj)/mainboard/$(MAINBOARDDIR)/initram.o +INITRAM_OBJ=$(obj)/stage0.init $(obj)/stage0.o $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \ + $(obj)/northbridge/amd/geodelx/raminit.o \ + $(obj)/southbridge/amd/cs5536/smbus_initram.o \ + $(obj)/southbridge/amd/cs5536/cs5536_early_setup.o\ + $(obj)/arch/x86/geodelx.o +$(obj)/linuxbios.initram: $(INITRAM_OBJ) $(Q)# initram links against stage0 $(Q)printf " LD $(subst $(shell pwd)/,,$(@))\n" $(Q)$(LD) -R $(obj)/stage0.o -Ttext 0x80000 \ $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \ + $(obj)/northbridge/amd/geodelx/raminit.o \ + $(obj)/southbridge/amd/cs5536/smbus_initram.o \ + $(obj)/southbridge/amd/cs5536/cs5536_early_setup.o\ + $(obj)/arch/x86/geodelx.o\ --entry=main -o $(obj)/linuxbios.initram.o $(Q)printf " OBJCOPY $(subst $(shell pwd)/,,$(@))\n" $(Q)$(OBJCOPY) -O binary $(obj)/linuxbios.initram.o \ @@ -76,7 +69,7 @@ STAGE2_MAINBOARD_OBJ = mainboard.o vga.o -STAGE2_CHIPSET_OBJ = +STAGE2_CHIPSET_OBJ = $(obj)/mainboard/$(MAINBOARDDIR)/%.o: $(src)/mainboard/$(MAINBOARDDIR)/%.c $(Q)mkdir -p $(obj)/mainboard/$(MAINBOARDDIR) Added: LinuxBIOSv3/mainboard/amd/norwich/initram.c =================================================================== --- LinuxBIOSv3/mainboard/amd/norwich/initram.c (rev 0) +++ LinuxBIOSv3/mainboard/amd/norwich/initram.c 2007-06-15 15:33:50 UTC (rev 354) @@ -0,0 +1,93 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <lib.h> +#include <console.h> +#include <post_code.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <msr.h> +#include <amd_geodelx.h> +#include <southbridge/amd/cs5536/cs5536.h> +#include <northbridge/amd/geodelx/raminit.h> + +#define MANUALCONF 0 /* Do automatic strapped PLL config */ +#define PLLMSRHI 0x00001490 /* manual settings for the PLL */ +#define PLLMSRLO 0x02000030 +#define DIMM0 ((u8) 0xA0) +#define DIMM1 ((u8) 0xA2) + + +/** + * Place holder in case we ever need it. Since this file is a + * template for other motherboards, we want this here and we want the + * call in the right place. + */ + +static void mb_gpio_init(void) +{ + /* Early mainboard specific GPIO setup */ +} + +/** + * main for initram for the amd norwich. It might seem that you + * could somehow do these functions in, e.g., the cpu code, but the + * order of operations and what those operations are is VERY strongly + * mainboard dependent. It's best to leave it in the mainboard code. + */ +int main(void) +{ + u8 smb_devices[] = { + DIMM0, DIMM1 + }; + + post_code(POST_START_OF_MAIN); + + system_preinit(); + geodelx_msr_init(); + + cs5536_early_setup(); + + /* NOTE: must do this AFTER the early_setup! + * it is counting on some early MSR setup + * for cs5536. + */ + /* We do this early for debug. + * real setup should done in chipset init via config.lb + */ + cs5536_setup_onchipuart(); + mb_gpio_init(); + uart_init(); + console_init(); + + pll_reset(MANUALCONF, PLLMSRHI, PLLMSRLO); + + cpu_reg_init(0, DIMM0, DIMM1); + + sdram_set_registers(); + sdram_set_spd_registers(DIMM0, DIMM1); + sdram_enable(DIMM0, DIMM1); + /* Check low memory */ + /*ram_check(0x00000000, 640*1024); */ + + return 0; +} Modified: LinuxBIOSv3/southbridge/amd/cs5536/cs5536.h =================================================================== --- LinuxBIOSv3/southbridge/amd/cs5536/cs5536.h 2007-06-14 20:00:58 UTC (rev 353) +++ LinuxBIOSv3/southbridge/amd/cs5536/cs5536.h 2007-06-15 15:33:50 UTC (rev 354) @@ -441,4 +441,17 @@ #define FLASH_IO_128B 0x0000FF80 #define FLASH_IO_256B 0x0000FF00 +/* function prototypes */ +void cs5536_setup_extmsr(void); +void cs5536_setup_idsel(void); +void cs5536_usb_swapsif(void); +void cs5536_setup_iobase(void); +void cs5536_setup_power_button(void); +void cs5536_setup_smbus_gpio(void); +void cs5536_disable_internal_uart(void); +void cs5536_setup_cis_mode(void); +void cs5536_setup_onchipuart(void); +void cs5536_early_setup(void); + + #endif /* SOUTHBRIDGE_AMD_CS5536_CS5536_H */

1 0

Re: [LinuxBIOS] r351 - LinuxBIOSv3/arch/x86
by Indrek Kruusa 15 Jun '07

15 Jun '07

Ühel kenal päeval (neljapäev 14 juuni 2007 8:45 pm) kirjutas svn(a)openbios.org: > Author: rminnich > Date: 2007-06-14 19:45:35 +0200 (Thu, 14 Jun 2007) > New Revision: 351 > > Added: > LinuxBIOSv3/arch/x86/geodelx.c > Log: > This patch adds a file for geodelx cpu-specific support. It combines > into one relatively small file (582 lines or so) all the tricky bits > of the LX. This code is "known good" from V2. Per new standards, > naming conventions have changed. > > Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> > Acked-by: Stefan Reinauer <stepan(a)coresystems.de> > > > > Added: LinuxBIOSv3/arch/x86/geodelx.c > =================================================================== > --- LinuxBIOSv3/arch/x86/geodelx.c (rev 0) > +++ LinuxBIOSv3/arch/x86/geodelx.c 2007-06-14 17:45:35 UTC (rev 351) > @@ -0,0 +1,577 @@ > +/* > + * This file is part of the LinuxBIOS project. > + * > + * Copyright (C) 2006 Indrek Kruusa <indrek.kruusa(a)artecdesign.ee> > + * Copyright (C) 2006 Ronald G. Minnich <rminnich(a)gmail.com> > + * Copyright (C) 2007 Advanced Micro Devices, Inc. Hmm... does anybody knows what I have done here? ;) I'm gonna not NACK this immediately but I should prepare some patches regarding to license headers (I know - I said it already some times ago). thanks, Indrek

1 0

[LinuxBIOS] bigger flash part for via/epia
by Thomas Ekstrand 15 Jun '07

15 Jun '07

Hi! I want a bigger bios flash so I'm wondering, what is the maximum size possible for a flash memory chip to a via epia board? The original is only 256KByte. Any recommended part numbers are welcome! Thanks in advance! /Thomas

2 3

← Newer
1
...
15
16
17
18
19
20
21
...
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot June 2007