coreboot January 2005

coreboot@coreboot.org

43 participants
155 discussions

Re: configurable HT speeds.
by YhLu 18 Jan '05

18 Jan '05

With normal BIOS, there is option to let End user to select 1000Mhz or 800Hz. And customer report there is performance difference with that. YH > >In addition I measured it on a dual cpu system and I could not >detect a performance difference based on the link speed so I decided >to play that one safe.

2 1

SMP linux
by Gin 18 Jan '05

18 Jan '05

I've been stuck at this problem for a while. My linuxbios boots a NON-SMP kernel ok but not the SMP one. The SMP kernel gets loaded and run. When it tries to access an IDE drive, an IDE command timed out before anything returns(kernel messages). My I/O APIC settings correspond to the MP table. All ISA devices are mapped to the I/O IOAPIC at 0xFEC00000. But where do we set this I/O APIC up? How does it know to route the IRQs to the local APIC? Another question is, does linuxbios setup the local APIC as Virtual Wire mode that via I/O APIC? My board is similar to Tyan/s2735, does anyone get this booted with a SMP linux before?? many thinks, gin

3 2

configurable HT speeds.
by Stefan Reinauer 18 Jan '05

18 Jan '05

Hi, as far as I see CPU-CPU HT links are configured with 800MHz at max. C0 and newer K8 CPUs should be able to do 1000. Is there any reason not to enable this in such case? Also, if there happened to be 8131 which do 800MHz on the link, can we make this configurable via cmos or is Config.lb the way to go that early? Stefan

2 1

Re: Overlaping IO resource for AMD K8
by YhLu 18 Jan '05

18 Jan '05

Yes. I swap the class_hi and class_lo in pci_rom.h YH -----Original Message----- From: Li-Ta Lo [mailto:ollie@lanl.gov] Sent: Tuesday, January 18, 2005 10:31 AM To: YhLu Cc: Eric W. Biederman; Ronald G. Minnich; LinuxBIOS Subject: Re: Overlaping IO resource for AMD K8 On Tue, 2005-01-18 at 11:13, YhLu wrote: > Ollie, > > I fixed one bug in the class code ...in pci_rom.c. please check it. ... > > YH Did you check in ? Ollie

1 0

Re: Running with VGA
by YhLu 18 Jan '05

18 Jan '05

Can I use that to connect Exchange Server in IMAP? YH -----Original Message----- From: Richard Smith [mailto:smithbone@gmail.com] Sent: Tuesday, January 18, 2005 10:13 AM To: YhLu Cc: ebiederman(a)lnxi.com; Li-Ta Lo; Sagiv Yefet; LinuxBIOS Subject: Re: Running with VGA On Tue, 18 Jan 2005 10:07:00 -0800, YhLu <YhLu(a)tyan.com> wrote: > Maybe I need to change my mail program. What should I use? Thunderbird. http://www.mozilla.org -- Richard A. Smith

2 1

Re: Overlaping IO resource for AMD K8
by YhLu 18 Jan '05

18 Jan '05

Ollie, I fixed one bug in the class code ...in pci_rom.c. please check it. ... YH

2 1

Re: Running with VGA
by YhLu 17 Jan '05

17 Jan '05

Maybe I need to change my mail program. What should I use? YH

2 1

Re: Overlaping IO resource for AMD K8
by YhLu 17 Jan '05

17 Jan '05

I want to execute one option rom for onboard device, and work out to find one bug about class code. Another problem is that some option rom has wrong class code....I wonder if device id and vendor id is enough... YH

1 0

Re: configurable HT speeds.
by YhLu 17 Jan '05

17 Jan '05

Maybe need to check the CPU rev to find out the errata to be applied to limit the speed to 800Mz. That would be easy. YH -----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Tuesday, January 18, 2005 5:30 AM To: linuxbios(a)clustermatic.org Subject: configurable HT speeds. Hi, as far as I see CPU-CPU HT links are configured with 800MHz at max. C0 and newer K8 CPUs should be able to do 1000. Is there any reason not to enable this in such case? Also, if there happened to be 8131 which do 800MHz on the link, can we make this configurable via cmos or is Config.lb the way to go that early? Stefan _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

v2 testbios compile error
by Richard Smith 17 Jan '05

17 Jan '05

I'm trying to compile the userspace standalone version of testbios and I'm getting errors in all of the pciReadByte, Word and Long functions. 'too many arguments to function pci_get_dev' Anyone else have this issue? V1 testbios on the same machine compiles fine. -- Richard A. Smith

4 8

← Newer
1
...
4
5
6
7
8
9
10
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot January 2005