I have a Dell Latitude CP M233XT specs http://docs.us.dell.com/support/edocs/systems/pmojav/specs.htm
lspci output 00:00.0 Host bridge: Intel Corporation 430TX - 82439 MTXC (rev 01) 00:01.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01) 00:01.1 IDE Interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] 00:03.0 CardBus Bridge: Texas Instruments PCI1131 (rev 01) 00:03.1 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
I would like to run both windows and linux if possible
Thanks Jeff
On Wed, Oct 29, 2008 at 9:22 AM, Jeffrey Dunbar jgdunbar@charter.netwrote:
I have a Dell Latitude CP M233XT specs http://docs.us.dell.com/support/edocs/systems/pmojav/specs.htm
Not currently supported. As of this message, the only supported laptop is an old revision of the OLPC's XO laptop, it has an embedded controller that docs are available for. AFAIK, most embedded controllers require you to sign an NDA to get the docs (if they'll give them to you at all), and an NDA usually means you can't commit the code back to an open-source project.
lspci output 00:00.0 Host bridge: Intel Corporation 430TX - 82439 MTXC (rev 01)
Supported in v1, could be ported to v2
00:01.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01) 00:01.1 IDE Interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
Should be supported in v2, not in v3 (yet).
00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] 00:03.0 CardBus Bridge: Texas Instruments PCI1131 (rev 01) 00:03.1 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
I would like to run both windows and linux if possible
That could be a problem, I'm not sure the current status of ADLO. Linux should boot fine, once the hardware's initialized.
-Corey
-
Corey Osgood -
Jeffrey Dunbar